RS-15 series - Pewatron AG

RS-15 series - Pewatron AG
040-01-409-167-EH-0316.pdf
040-01-409-167-EH-0316
RS-15
15W Single Output Switching Power Supply
series
■ Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
No load power consumption<0.5W
All using 105℃ long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty
SPECIFICATION
MODEL
OUTPUT
INPUT
PROTECTION
RS-15-3.3
RS-15-5
RS-15-12
RS-15-15
RS-15-24
RS-15-48
DC VOLTAGE
3.3V
5V
12V
15V
24V
48V
RATED CURRENT
3A
3A
1.3A
1A
0.625A
0.313A
CURRENT RANGE
0 ~ 3A
0 ~ 3A
0 ~ 1.3A
0 ~ 1A
0 ~ 0.625A
0 ~ 0.313A
RATED POWER
9.9W
15W
15.6W
15W
15W
15.024W
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
120mVp-p
120mVp-p
200mVp-p
200mVp-p
VOLTAGE ADJ. RANGE
2.9 ~ 3.6V
VOLTAGE TOLERANCE Note.3 ±3.0%
4.75 ~ 5.5V
±2.0%
10.8 ~ 13.2V
±1.0%
13.5 ~ 16.5V
±1.0%
22 ~ 27.6V
±1.0%
43.2 ~ 52.8V
±1.0%
LINE REGULATION
Note.4 ±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
Note.5 ±2.0%
±1.5%
±0.5%
±0.5%
±0.5%
±0.5%
81%
82%
82%
28.4 ~ 32.4V
55.2 ~ 64.8V
SETUP, RISE TIME
1000ms, 30ms/230VAC
HOLD UP TIME (Typ.)
70ms/230VAC
VOLTAGE RANGE
85 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
72%
0.35A/115VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
81%
OVERLOAD
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
Protection type : Shut off o/p voltage, clamping by zener diode
OVER TEMPERATURE
Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-20 ~ +70℃ (Refer to "Derating Curve")
EMC EMISSION
DIMENSION
PACKING
NOTE
77%
0.25A/230VAC
COLD START 65A / 230VAC
<2mA / 240VAC
EMC IMMUNITY
MTBF
OTHERS
12ms/115VAC at full load
120 ~ 370VDC
LEAKAGE CURRENT
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 6)
1000ms, 30ms/115VAC at full load
17.25 ~ 20.25V
20 ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:2KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-1, light industry level, criteria A
1608.8Khrs min. MIL-HDBK-217F (25℃)
62.5*51*28mm (L*W*H)
0.13Kg; 108pcs/15Kg/0.71CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
File Name:RS-15-SPEC 2015-07-08
040-01-409-167-EH-0316.pdf
040-01-409-167-EH-0316
RS-15
15W Single Output Switching Power Supply
Mechanical Specification
Case No.971A
series
Unit:mm
1
51
2-M3 L=3
4
25.25
30.48±0.5
3
6±0.2
39.66±0.5
2
5
LED
+V ADJ.
39.1
14.65
62.5
13 max.
Assignment
AC/L
AC/N
FG
Pin No.
4
5
Assignment
DC OUTPUT -V
DC OUTPUT +V
2-M3 L=4
15.1
Pin No.
1
2
3
28
Terminal Pin No. Assignment
39.1
11.5
Block Diagram
fosc : 132KHz
RECTIFIERS
&
FILTER
EMI
FILTER
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PWM
CONTROL
FG
Derating Curve
+V
-V
DETECTION
CIRCUIT
Output Derating VS Input Voltage
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-20
0
10
20
30
40
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
85
95
100
115
120
140
160
180
200
220
240
264
INPUT VOLTAGE (VAC) 60Hz
File Name:RS-15-SPEC 2015-07-08
Headquarter Switzerland:
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Phone +41 44 877 35 00
[email protected]
Office Germany:
Pewatron AG
Neumarkter Straße 86a
D-81673 Munich
Phone +49 89 260 38 47
[email protected]
We are here for you. Addresses and Contacts.
Sales Switzerland & Liechtenstein
Sales International Key Accounts
Postcode 3000 – 9999
Postcode 1000 – 2999
Basil Frei
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Eric Letsch
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Peter Felder
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Phone + 41 44 877 35 18
Mobile + 41 76 279 37 26
Phone + 41 44 877 35 14
Mobile + 41 76 491 66 70
Phone + 41 44 877 35 05
Mobile + 41 79 406 49 83
[email protected]
[email protected]
[email protected]
Sales Germany
Postcode 00000 – 31999
Postcode 38000 – 39999
Postcode 80000 – 99999
Postcode 32000 – 37999
Postcode 40000 – 79999
Sales Austria
Kurt Stritzelberger
Pewatron AG
Neumarkter Straße 86a
D-81673 Munich
Gerhard Vetter
Pewatron AG
Fürstenbergstraße 12
D-55422 Bacharach-Medenscheid
Kurt Stritzelberger
Pewatron AG
Neumarkter Straße 86a
D-81673 Munich
Phone + 49 89 260 52 80
Mobile + 49 171 803 41 35
Phone + 49 674 394 75 75
Mobile + 49 163 762 74 30
Phone + 49 89 260 52 80
Mobile + 49 171 803 41 35
[email protected]
[email protected]
[email protected]
Pressure Sensors
Gas sensors / Gas sensor modules
Load cells
Linear position sensors
Angle sensors
Philipp Kistler
Phone + 41 44 877 35 03
[email protected]
Thomas Clausen
Phone + 41 44 877 35 13
[email protected]
Eric Letsch
Phone + 41 44 877 35 14
[email protected]
Accelerometers
Power supplies
Current sensors
Eric Letsch
Phone + 41 44 877 35 14
[email protected]
Sebastiano Leggio
Phone + 41 44 877 35 06
[email protected]
Sebastiano Leggio
Phone + 41 44 877 35 06
[email protected]
Drive technology
CH Postcode 5000 – 9999 / DE
Drive technology
CH Postcode 1000 – 4999 / AT / IT / FR
Roman Homa
Mobile + 41 79 444 00 86
[email protected]
Christian Mohrenstecher
Mobile +41 76 444 57 93
[email protected]
Sales Other Countries / Product Management
Competitive sensor & power supply solutions worldwide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement