fire detection systems
AS Standard
FIRE DETECTION
SYSTEMS
Your Safety. Our Technology.
A LEVEL OF DETECTION THAT
EVERYONE LOOKS UP TO
Hochiki has been committed to providing and supporting
quality detectors in Australia for more than 30 years
– a commitment that will continue into the future.
CONTENTS
HOCHIKI GLOBAL NETWORK AND PROJECTS
4
CONTINUOUS UPGRADE PATH
6
FEATURES (OF OUR “SMOKE DETECTORS”)
8
ANALOGUE ADDRESSABLE
Hochiki System (1-2 loop Syncro AS Panel)
Hochiki System (2-16 loop Taktis Panel)
Analogue Sensors and Devices for Taktis and Syncro AS Panels
10
14
22
WIRELESS FIRE DETECTION
28
ANALOGUE SENSORS FOR FIRENET, NFP, PHOENIX PANELS
32
NEW VISUAL ALARM DEVICES 33
35
Choosing Your VAD
TECHNOLOGY GUIDE
Audio and Visual Products
CHQ ‘Smart Fix’ Modules
High Performance Chamber Technology
CONVENTIONAL
36
39
42
Conventional Sigma CP Panel with Hochiki
Conventional Sigma XT Panel with Hochiki
New Conventional Detectors and Devices for Sigma CP Panels
Conventional Detectors
Hochiki Conventional Detectors Panel Compability Chart
44
46
48
55
57
MARINE FIRE DETECTION
58
INTRINSICALLY SAFE FIRE DETECTION
62
ANCILLARY EQUIPMENT
68
PRODUCT INDEX
71
Hochiki Australia Ptd Ltd reserves the right to alter the specification of its products from
time to time without notice.Although every effort has been made to ensure the accuracy
of the information contained in this document it is not warranted or represented by Hochiki
Australia Pty Ltd to be a complete and up-to-date description.
HOCHIKI GLOBAL NETWORK AND PROJECTS
HOCHIKI AUSTRALIA
SALES TERRITORIES
ALL OCEANIA INCLUDING NZ,
PAPUA, FIJI
Eurostar Station
St Pancras, London UK
Open Academy,
Norwich UK
HOCHIKI EUROPE
KENTEC
Millburn Middle School,
NJ USA
HOCHIKI AMERICA
HOCHIKI MEXICO
Windser Barra Hotel,
Rio de Janeiro Brazil
COMPANY OVERVIEW
Established early in the 20th Century, Hochiki is one of the world’s leading manufacturers
of commercial and industrial fire detection and emergency lighting solutions.
With a heritage of innovative design and leading-edge technologies, Hochiki’s products have
acquired global acceptance as the bench mark for high-integrity and long-term reliability.
NTU Sports Center,
Taiwan
Qatar Financial Center
Tower, Qatar Middle East
HOCHIKI TAIWAN
HOCHIKI MIDDLE EAST
HOCHIKI CORPORATION
HOCHIKI INDIA
HOCHIKI BANGKOK
Brisbane International
Airport, Australia
Melbourne International
Airport, Australia
Vicom Center,
Ho Chi Mihn Vietnam
NTT Singapore,
Singapore
HOCHIKI AUSTRALIA
HOCHIKI ASIA PACIFIC
HOCHIKI JAKARTA
INTERNATIONAL COVERAGE REGIONAL COMMITMENT
Hochiki is an independent, multi-national, publicly
listed company with over 1500 employees across
five manufacturing plants, thirty-one sales offices
and eleven subsidiaries. The company’s global sales
turnover exceeds $750 million per annum.
Total commitment to meeting the needs
of individual national markets has reinforced the
company’s global reputation, resulting in Hochiki
products being installed in many prestigious sites
in over 80 countries worldwide.
Hochiki invests in manufacturing innovation
on a continual basis to ensure customer satisfaction
and production facilities in Japan, the United
States of America and Europe ensure international
continuity of quality, service and supply.
These regional centres design and manufacture
products and provide technical support suited
to local standards and customer requirements.
Hochiki’s vision is to provide products to the highest
levels of quality and reliability. Complying with
industry standards, the ultimate quality of Hochiki’s
comprehensive range of products virtually
eliminates false alarms and, combined with ease
of installation, offers the greatest reliability with
the lowest total cost of ownership possible
in a modern life safety system.
CONTINUOUS UPGRADE PATH
LEGACY MODELS
CURRENT MODELS
ANALOGUE SENSORS
1992
ANALOGUE
SENSORS
1997
LEGACY MODELS
2008
2012
CURRENT MODELS
For Firenet, NFP, Phoenix Panels
CURRENT MODELS
For Syncro AS and Taktis Panels
PHOTO
ALB-E
ALG-AS
AIA-E
AIE-AS
ATA-E
ATG-AS
ALK-AS
ALK-ASN
ACB-AS
ACB-ASN
ACB-ASW
ACB-ASNW
ION
HEAT
HEAT
WATERPROOF
MULTI
ACA-E
ACA-ASN
COLOUR
IVORY
IVORY
WHITE
BASE
YBF-RL/2NBF
YBN-R/2NA
YBN-R/3(WHT)
FFE9000
FIRENET
FFE10000
NFP
AMPAC AB3000
PHOENIX
COMPATIBLE
PANELS
Please see page 32 ANALOGUE
SENSORS FOR FIRENET, NFP,
PHOENIX PANELS
6 | CONTINUOUS UPGRADE PATH
SYNCRO AS
Please see page 10
Syncro AS
panel with Hochiki
TAKTIS
Please see
page 14
Taktis panel
with Hochiki
Please see page 22 ANALOGUE
SENSORS AND DEVICES FOR TAKTIS
AND SYNCRO AS PANELS
CONVENTIONAL DETECTORS
1980
1992
CONVENTIONAL
DETECTORS
1997
LEGACY MODELS
2004
2012
CURRENT MODELS
CURRENT MODELS
For Sigma CP Panels
PHOTO
SLG-A
SLK-A
SLR-AS
SLV-AS
SLV-AS3
SIF-A
SIH-AM
SIJ-ASN
DCA-B-60R
DCC-A
DCD-A
DCD-A3
DCA-B-90R
DCC-C
DCD-C
DCD-C3
DFB-60B
DFE-60B
DFJ-60B
DFJ-A3
DFB-90D
DFE-90D
DFJ-90D
DFJ-C3
IVORY
IVORY
IVORY
WHITE
ION
HEAT
COLOUR
- YBN-R/6(WHT)
- YBF-RL/4AH4M
BASE
- YBC-RL/4H5
- AMU-MBM
Addressable
Master Base
- YBO-R/4A
With remote LED
- AMU-B2M
Addressable Base
- YBN-R/4C
- YBO-R/6R(WHT)
Latching Relay Base
- YBO-R/6RN(WHT)
Non Latching Relay Base
- YBF-RL/3JM
Slave Base
COMPATIBLE
PANELS
- YBO-R/6PA(WHT)
2 wire base
VARIOUS
VARIOUS
VARIOUS
Please see page 57
Panel compatible chart
SIGMA CP
Please see page 44
Sigma CP panel with Hochiki
Please see page 55
CONVENTIONAL DETECTORS
Please see page 48
CONVENTIONAL DETECTORS AND
DEVICES FOR SIGMA CP PANELS
CONTINUOUS UPGRADE PATH | 7
FEATURES (OF OUR “SMOKE DETECTORS”)
HOCHIKI’S SMOKE DETECTORS USE A STEAM-PROOF
HONEYCOMB MESH STRUCTURE!!
“
They are recommended to be used at locations where steam tends to generate,
such as a hotel room! It is the “Fire Detector” that actually detects fires,
regardless of how expensive the panel system is. Hochiki’s “Smoke Detector Series”
is a result of unique technology achieved over many years. They are highly rated
“Smoke Detectors” for being able to detect a fire early and also for being steam proofed.
FUNCTION 1: MAKING THE FLOW DIRECTION EVEN
By making the inner structure flat by making the
internal smoke chamber flat, it enables an even
direction of smoke flow providing greater and
accurate sensitivity, compared to the conventional
design which had emitter, receiver protrusions
inside the detector chamber. This additional
surface area within the chamber allows for Adhesion
of insects and dust, as well as steam condensation.
With this new internal chamber design false alarms
caused by transient steam and other foreign particles
are reduced.
ORIGINAL DESIGN
CURRENT DESIGN
Due to inner protrusions (within the smoke
detection chamber), the flow and direction
of smoke becomes uneven and unnecessarily
accelerates the smoke flow from the optimal
direction, resulting in false alarms caused
by steam and other waste products.
By flattening the inner structure (within the smoke
detection chamber), smoke particle flow from
all directions is made even; also thanks to Hochiki’s
know how, false alarms caused by steam and others
are prevented.
8 | FEATURES (OF OUR “SMOKE DETECTORS”)
FUNCTION 2: FLAT RESPONSE FLAT SENSITIVITY AGAINST
VARIOUS TYPES OF FIRE SMOKES
LOWER SENSITIVITY
HIGHERSENSITIVITY
The structure of the detection sensor that catches
scattered light is optimized by optical simulation.
The sensitivity for flaming black smoke with small
particles is enhanced, while the sensitivity
for smouldering white smoke with large particles
is reduced. This achieves almost even sensitivity
to various types of fires and allows early and accurate
fire detection. Further, as it has low sensitivity
for steam with large particles, the chance of raising
a false alarm is significantly reduced even when
steam enters.
UNIQUE TECHNOLOGY
Heptane
Ionized system
Photoelectric system: Conventional Design
Photoelectric system: Flat Response Design
Wood
FLAMING
Wood
Cotton
SMOULDERING
Urethane
FLAMING
Note: Photoelectric smoke detector is based upon the principle
of smoke detection using light; therefore, it is not perfect
for preventing false alarms caused by steam.
FUNCTION 3: HONEYCOMB MESH
STRUCTURED INSECT MESH
DESPITE HAVING SMALLER APERTURE,
A WIDE APERTURE RATIO IS MAINTAINED
By making the aperture smaller (0.4mm),
narrowing the distance between apertures
(0.05mm) and widening the effective aperture
ratio, it maximizes the smoke flow and improves
the tolerance against insects and dust.
UNIQUE TECHNOLOGY
INSECT MESH IMAGE MANUFACTURED BY HOCHIKI
Manufactured by SUS:
t=0.1
Aperture: 79%
Aperture area: 0.136mm2
STEAM
TF4
Due to the waste particle product of steam, steam
is encouraged to diffuse through the insect mesh,
which results in dissipation of steam reducing false alarms
FEATURES (OF OUR “SMOKE DETECTORS”) | 9
HOCHIKI SYSTEM (1-2 LOOP SYNCRO AS PANEL)
HIGH INTEGRITY CONFIGURABLE NETWORK
Each loop is capable
of hosting up to:
127 devices, plus
127 Sounder Bases
LOOP 1 LOOP 2
(if fitted)
Control Panel is manufactured by Hochiki Group Company,
Kentec Electronics Ltd. and distributed by Incite fire Pty Ltd.
SYNCRO AS
1-2 Loop Analogue
Addressable Control Panel
Supports all
Syncro I/O
modules.
Up to 16 GUIDE
Repeaters may
be connected
to a GUIDE system
via a LAN
(Local Area Network)
An RS232 to RS485
data converter
is supplied with
the GUIDE system.
RS485
SYNCRO GUIDE
LAN
Repeater Facility
for GUIDE System
Network
card
required
RS232
SYNCRO GUIDE
Graphical User
Interface for fire
Detection Equipment
The GUIDE dongle
is fitted to the RS232
serial interface inside the
Syncro Panel. It converts
data to RS485 and must
be fitted for the system
to work.
10 | ANALOGUE ADDRESSABLE
RS485
SYNCRO AS
1-2 Loop Analogue
Addressable Control Panel
(if fitted)
LOOP 2 LOOP 1
Each loop is capable
of hosting up to:
127 devices, plus
127 Sounder Bases
SYNCRO AS
1-2 Loop Analogue
Addressable Control Panel
24V DC or
230V AC
A mixture of up to 32 devices
(including Syncro View, Ident
and Matrix) can be fitted to each
panel on the RS485 serial interface.
The maximum number of Syncro
View panels on a single RS485
serial interface is 15.
ANALOGUE SENSORS AND DEVICES
SYNCRO MATRIX
Fire Alarm Mimic
Display System
Please see page 26
24V DC or
230V AC
SYNCRO INDENT
Programmed LED
Indication Panels
K555 Network
card required
Up to 64 Panels can be
added to the network
24V DC or
230V AC
SYNCRO VIEW
Local LCD Repeater
RS485
K560
16 Channel I/O
Board
K547
8 Way Relay Board
K546
6 Way Sounder
Board
K545
4 Way Conventional
Zone Board
SYNCRO AS
1-2 Loop Analogue
Addressable Control Panel
24V DC
24V DC
24V DC
24V DC
ANALOGUE ADDRESSABLE | 11
SYNCRO AS
ANALOGUE ADDRESSABLE 1-2 LOOP CONTROL PANELS
COMPATIBLE EQUIPMENT & EXTRAS
K560 16 CHANNEL
I/O BOARD
K547 8 WAY
RELAY BOARD
12 | ANALOGUE ADDRESSABLE
K546 6 WAY
SOUNDER BOARD
K545 4 WAY
CONVENTIONAL
ZONE BOARD
K555 NETWORK CARD
SYNCRO AS OVERVIEW
The Syncro AS addressable control panel is designed
to meet the requirements of A7240.2, AS 7240.4.
Available in 1 or 2 loops and networkable up to 64
panels with up to 500 zones per network (the perfect
solution for small and large projects), the Syncro AS
is capable of driving a full loop of sounders @ 85dB.
SYNCRO AS FEATURES
• ActivFire listed AFP-2761
• Approved to AS7240.2 and AS7240.4
• Available in 1 or 2 loops and networkable
up to 64 panels with up to 500 zones
per network (the perfect solution
for small and large solutions)
Housed in the same installer friendly and attractively
styled enclosure as the Sigma CP (conventional)
and Sigma XT (extinguishant) range of control panels,
the Syncro AS combines compact and practical styling
with the programming power and connectivity normally
associated with much larger systems.
• 127 devices per loop/Up to 800
sub addressable
TECHNICAL
• Software enabled with 003 key
Overall size (std)
385W X 520H X 110D (MM)
Finish
EPOXY POWDER COATED
Colour – lid & box
BS 00 A 05 GREY – FINE TEXTURE
Colour – controls plate
& labels
RAL 7047 LIGHT GREY – SATIN
Supply voltage
230V AC +10%/-15%
(100 WATTS MAXIMUM)
Mains supply fuse
1.6 AMP (F1.6A L250V)
Power supply
rating imax a
Power supply
rating imax b
Operating voltage
Battery charging circuit
impedance Rimax
Min output current
for correct operation Imin
• LCD display & 16 zone LED indication
• Compatible with Hochiki ESP detectors
and modules
• Open protocol, non-proprietary software
• Optional OWS available – 20, 40, 60, 100
• Optional fan control available
• Capable of driving a high number of loop
powered sounders
• Base cabinet size 385W x 520H x 110D
400MA
• Range of cabinet sizes available
Other Features
• Standard or Deep cabinet options
2.3A
• 16 zonal LED indicators
18 TO 30 VOLTS DC
1.35R
• 5 preconfigued digital inputs
• Easily configured using Loop Explorer software
130MA
• Up to 32 RS485 expansion modules per panel
Max ripple current
1.5 +/- 0.3V
Battery type
SEATED LEAD ACID
Battery charge voltage
27.6 VDC NOMINAL (TEMPERATURE
COMPENSATED) BATTERY
Charge current
0.7A
• Programmable one touch test mode
Battery fuse
20MM 3.15A GLASS
• Powerful and versatile cause
& effect programming
Max current draw
from batteries
Aux 24V output rating
Sounder output rating
3A
300MA MAXIMUM LOAD
(FUSED AT 500MA)
CONFIG FEATURES
• Comprehensive day/night mode facility
• Cause and effect wizard including
• Cause and effect action
EACH RATED AT 1A
• Disablement configuration
Relay contacts
30VDC, 1A MAXIMUM
• Test mode configuration
Detection loop current
400MA
(2 outputs)
NEW FEATURES
CABINET OPTIONS
M3 Cabinet
• 385W x 520H x 110D (mm)
• 2 viewing/control apertures
• Lockable window door available
M3D Cabinet
• 385W x 520H x 200D (mm)
• 2 viewing/control apertures
• Lockable window door available
• Hotel Mode
M4 Cabinet
• 385W x 700H x 200D (mm)
• 3 viewing/control apertures
• Lockable window door available
Flush surround available
for all cabinets
• AAF
• Non latching detectors
• Non fire attributes: Detector options
for system control only
ANALOGUE ADDRESSABLE | 13
HOCHIKI SYSTEM (2-16 LOOP TAKTIS PANEL)
HIGH INTEGRITY CONFIGURABLE NETWORK
LOOP 3 - LOOP 8
Each loop is capable
of hosting up to:
127 devices, plus
127 Sounder Bases
LOOP 1 LOOP 2
(if fitted)
Control Panel is manufactured by Hochiki Group Company,
Kentec Electronics Ltd. and distributed by Incite fire Pty Ltd.
TAKTIS FIRE
2-8 Loop Analogue
Addressable Control Panel
TAKTIS VIRTUAL RESOURCE
VR ACCESS - A
ccess data from
all your systems
VR VAULT - S
ecure document vault
TAKTIS VISION
Configurable Fire
Alarm Repeater
24 Vdc
VR SERVICE - C
omplete service
management utility
with automated
data transfer
Media Gateway
VR PRINT - E
liminates need for
panel mounted printers
Cloud Servers
GSM IP Dial-Up
TAKTIS FIRE
2–8 Loop Analogue
Addressable Control Panel
14 | ANALOGUE ADDRESSABLE
(if fitted)
LOOP 3 - LOOP 16
LOOP 2 LOOP 1
Each loop is capable
of hosting up to:
127 devices, plus 127
Sounder Bases
TAKTIS FIRE
2-16 Loop Analogue
Addressable Control Panel
ANALOGUE SENSORS AND DEVICES
Please see page 26
Up to 128 Panels/Repeaters
can be added to the network
10 Cards
Plug in slots
K772
K791
K792
K793
16 Channel
I/O Board
8 Way
Relay Board
8 Way Conventional
Zone Board
4 Way
Sounder Board
RS485 bus
TAKTIS VISION
Configurable Fire
Alarm Repeater
24 Vdc
TAKTIS FIRE
2–16 Loop Analogue
Addressable Control Panel
ANALOGUE ADDRESSABLE | 15
TAKTIS FIRE
ANALOGUE ADDRESSABLE 2-16 LOOP CONTROL PANELS
COMPATIBLE EQUIPMENT & EXTRAS
SELECTION OF I/O
BOARDS
TAKTIS NETWORK CARD
16 | ANALOGUE ADDRESSABLE
VR TAKTIS MEDIA
GATEWAY
TAKTIS OVERVIEW
With the increasing demands for power in fire detection
and alarm systems, Taktis Fire Control Panels are well
placed to meet current and future needs.
All panels are available with either a 5.25A, 24V power
supply capable of charging up to 26Ah batteries
or a 10.25A, 24V power supply capable of charging
up to 45Ah batteries. Taktis Fire can be supplied
with a remote power supply unit, making the
Control Panel smaller and easier to install.
Up to 500 mA are available for each detection
loop allowing for a generous quantity of loop
powered devices.
The four sounder circuits are each capable of supplying
up to 2.5A at 24V to audio and audio visual devices.
Manage systems remotely from any location in a simple
and effective manner by configuring a Taktis Media
Gaterway communication device to the Virtual
Resource Servers and browser based software.
Taktis Fire systems are scalable with Taktis Net
Enhanced High Speed Networking. This allows
up to 128 panels to be connected together as a fully
fault tolerant networked system with rapid interpanel
communications and up to 1.2km of standard two
core fire resistant cabling between nodes.
Each panel can be configured to display all or selected
events from any other panel allowing master/slave,
multiple master/slave or peer to peer configuration.
Sophisticated network analysis tools provide
the ability to identify connection problems instantly
and the commissioning mode allows individual
panels to be prevented from transmitting events
to the network while maintaining communications.
Adding a Taktis “Bridge” Network Card to your Taktis
Panel or Taktis Network provides an interface between
existing Syncro and Taktis Control Systems, providing
backward compatibility and a unique upgrade path.
Taktis Media Gateway also provides the interface
between control systems, other products and
utilities such as PC graphics, Voyage Data Recorder
and a growing number of third party Taktis
compatible products.
Configurable serial ports will allow connection to BMS
systems using LonWorks, Modbus or BACnet protocols.
TAKTIS FEATURES
• AS7240-2, AS7240-4 and AS4428-3
• Up to 5000 software groups
• Support for up to 2000 zones
• Maximum of 50,000 devices NOT and TIME
as well as COINCIDENCE, OR and AND operators
in cause and effects
• Built in programmable I/Os
•U
p to 512 programmable I/O via optional
plug in cards
• Modbus, LonWorks and BACnet interface options
•F
ull colour, 7" 800 x 480 touch screen
graphical display
• Option to “invert” inputs and outputs
• 9999 event log with one second resolution
• Powerful, standard configuration templates
• Network up to 128 panels
• Fully automatic display brightness adjustment
• Configurable via USB port to PC or memory stick
• 80 character point and zone text
• Optional Media Gateway communications card
• Over 4000 sub address points per panel
• Over 5000 cause and effect outputs
• Over 20,000 cause and effect entries
ANALOGUE ADDRESSABLE | 17
TAKTIS VISION
ANALOGUE ADDRESSABLE ANNUNCIATORS
COMPATIBLE EQUIPMENT & EXTRAS
TAKTIS NETWORK CARD
MULTI PURPOSE
FLUSHING COLLAR
18 | ANALOGUE ADDRESSABLE
TAKTIS VISION OVERVIEW
Taktis Vision provides a means of allowing full
display and optional control of the Taktis Fire Alarm
Control Panel from a small and unobtrusive local
control station.
Taktis Vision may be connected to the fire Control
Panels’ fault tolerant, ancillary RS485 bus or to the
fire alarm panel fault tolerant network using standard,
fire rated cable offering flexibility in system wiring.
Based on an all new hardware and software platform,
the large, full colour graphical display with touch screen
functionality delivers information on the status
of the fire alarm system to single or multiple locations.
Available in several standard formats, Taktis Vision
can be mounted directly onto a wall, be recessed
using our quick-fix adaptor frame or fully flush mounted.
Special enclosure finishes and colours are also available
to match existing decor.
Taktis Vision repeaters can be configured to offer
full display and control to replicate the functionality
of the fire Control Panel or to operate as a simple,
display only device for applications where access
to control the fire alarm system would be inappropriate.
For other annunciation and control applications,
Taktis Vision can be configured to provide customisable
switches and indications for a host of fire system
ancillary functions.
TAKTIS VISION FEATURES
•R
obust, full colour, 7" 800 x 480 touch screen
graphical display
•F
ull indication of all information displayed
at the fire Control Panel
• Automatic display brightness adjustment
• Silenceable internal sounder
•C
onnections Via:
- Control Panel RS485 bus
- Option to connect to Control Panel network
• Low current, 24 Vdc powered
• Slim compact construction
• Configurable functionality
• Configurable languages
• Optional Enable key-switch
ANALOGUE ADDRESSABLE | 19
TAKTIS VIRTUAL RESOURCE
A COMPREHENSIVE SUITE OF SOFTWARE BASED TOOLS
20 | ANALOGUE ADDRESSABLE
TAKTIS VR OVERVIEW
To compliment the new, market leading range
of control systems, Virtual Resource is a unique
suiteof software tools aimed to deliver a whole
new dimension in Life Safety System Management.
It provides system designers, integrators and service
companies with the ability to remotely access and
comprehensively manage any system using intelligent
analysis of data collected from those systems.
End-users and facilities managers can also greatly
benefit from the powerful feature set that comes
with Virtual Resource.
Virtual Resource is based on technology successfully
trialled for many years and is one of the most technically
advanced management tools for fire detection and
other safety systems on the market.
With Virtual Resource, installers and service providers
are able to offer market leading functionality through
remote management and provide improved service
at a lower cost with greater efficiency.
The remote management features offered by Virtual
Resource can result in reduced fault call outs, improved
servicing regimes, more effective maintenance,
reduction of unwanted alarms and improved overall
service to the end user.
Whether you are a service provider, building owner
or facilities manager, change the way you think about
managing your Fire Detection System. With Taktis
Virtual Resources you can reduce costs, add value
and improve service integrity by implementing
the latest communication and analytical technologies.
VR ACCESS
Gain access to data from all of your systems,
assess performance, check status’ and make
decisions based on facts, not assumptions.
VR Access allows a Virtual Resource enabled fire
system to periodically report its status to the secure
servers. VR Access subscribers can view the latest
status report via any web enabled device.
VR VAULT
Subscribers to Virtual Resource can securely
store system and site related documentation
on our permanently backed up servers using
VR Vault. VR Vault provides a convenient
and permanently accessible storage location
for all documentation related to an installation.
This includes; installation drawings, commissioning
details and certificates, service and maintenance
records, general notes and any other documents
related to the installed system that the user requires.
VR SERVICE
VR Service provides a means to set up a comprehensive
fire alarm system servicing regime, adding benefit
to both the end customer and service company.
Site details can be imported from VR Access or added
and set up manually to create customer records.
Service frequency and device activation list schedules
can be set. Allocate resources such as travelling time
and estimated timings to complete the service,
and include essential data for planning engineer
activities. Service engineers can view and print
their work schedules along with site specific notes
and previous service records directly from the
system if required.
VR PRINT
VR Print is designed to replace panel mounted printers
which are inherently difficult to manage and provide
very limited information. VR Print provides a secure
method of storing and recalling the control system
events via any web browser. The user can simply
view the systems events on line, print PDF reports
or download the data in formats, such as csv,
for further data analysis.
TAKTIS VR FEATURES
• Unique Life Safety management utility
• Remote access to system data from anywhere
• Revenue driver for all business sizes
• Cut costs and drive up productivity
• Reduce environmental impact through technology
• Modular application based tool set:
- VR Access - View and mange my projects
- VR Vault - Store and retrieve system
documentation
- VR Service- Manage, add value and improve
compliance
- VR Print - Virtual printer
• More
to come…
More VR applications will be added to the
list providing users with further enhancement
to their value and revenue streams.
ANALOGUE ADDRESSABLE | 21
ANALOGUE SENSORS AND DEVICES
FOR TAKTIS AND SYNCRO AS PANELS
“
Hochiki’s comprehensive Analogue Addressable range is suitable for even the most
demanding applications and incorporates high performance sensors, a wide selection
of input and output modules and ancillaries. All products use Hochiki’s high integrity
communications link.
ALK-ASN
A Photoelectric Smoke Sensor incorporating Hochiki’s
unique High Performance Chamber, allows the sensor
threshold level to be increased, improving the signal
to noise ratio and reducing susceptibility to false alarms.
ACA-ASN
A Multi-Sensor incorporating a thermal element and a High
Performance Photoelectric Smoke Chamber. Has three
modes controlled from the Control Panel, allowing either
the optical or thermal element or both to be active
in making the fire decision.
ACB-ASN
A Multi-Heat Sensor incorporating a variable fixed
temperature heat element and a rate of rise heat element,
both controlled from the Control Panel allowing either
or both elements simultaneously to be active in making
the fire decision.
ACB-ASNW
An IP67 Rated Waterproof Multi-Heat Sensor which
can be used externally and is supplied with its own
fixing base. Flying leads from the sensor connect
directly to the loop via waterproof connectors.
22 | ANALOGUE ADDRESSABLE
• High Performance Chamber
• Twin fire LEDs allow 360° viewing
• Locking mechanism (sensor to base)
• Variable sensitivity
• Electronically addressed
•C
ompatible Bases: YBN-R/3, YBO-BS,
YBO-BSB, YBN-R/3(WHT)-SCI
• Approved to AS7240.7
•
•
•
•
•
•
•
•
High Performance Chamber
User selectable modes
Incorporates optical and heat elements
Twin fire LEDs allow 360° viewing
Pulsing/non-pulsing controlled from panel
Variable sensitivity
Electronically addressed
Compatible bases: YBN-R/3, YBO-BS,
YBO-BSB, YBN-R/3(WHT)-SCI
• Approval to AS7240.5, AS7240.7
•U
ser selectable modes
• Incorporates fixed temperature and rate
of rise heat elements
• Twin fire LEDs allow 360° viewing
• Pulsing/non-pulsing controlled from panel
• Electronically addressed
• Compatible bases: YBN-R/3, YBO-BS,
YBO-BSB, YBN-R/3(WHT)-SCI
• AS7240.5 Classes A1, B and C
•U
ser selectable modes
• Incorporates fixed temperature and rate
of rise heat elements
• Twin fire LEDs allow 360° viewing
• Pulsing/non-pulsing controlled from panel
• Electronically addressed
• IP67 rated
• Supplied with fixing base
• AS7240.5 Classes A1, B and C
ANALOGUE SENSORS AND DEVICES FOR TAKTIS AND SYNCRO AS PANELS
YBN-R/3
A Common Mounting Base which is fully compatible with
ALK-ASN, ACA-ASN and ACB-ASN sensors. Supplied with
square cable clamps for secure and reliable cable termination,
it is also capable of driving a remote LED if required.
(Red version – YBO-R/3(RED) for use with CHQ-WS2
Wall Sounder and CHQ-WSB Wall Sounder Beacon)
YBN-R/3 (SCI)
Model YBN-R/3(SCI) is a sensor mounting base featuring
an integral short-circuit isolator which will detect and isolate
short-circuits on the loop. When a short-circuit is detected
during power up the unit will drop the power to the rest
of the loop. The YBN-R/3(WHT)-SCI is compatible with
Hochiki Analogue sensors, beacons, sounders and indicators
and does not require a loop address. A remote fire LED
facility is provided when a sensor is attached to the base.
• Electronics free
• Stainless steel contacts
• Takes 2.5mm2 cables
• Slim profile – only 8mm
• Rugged wiring contacts
• Facility for remote indicator
• Quick connection via square cable clamps
•A
vailable in RED for use with CHQ-WS2
Wall Sounder and CHQ-WSB Wall
Sounder Beacon
•
•
•
•
Features integral SCI
Easy to fit
Slim profile
Matches standard base colours
NOTE: A fitted sensor will still be powered when this device is isolating.
YBO-R/SCI(RED)
The YBO-R/SCI(RED) Base has been designed to be used
with the red CHQ-WS2 Wall Sounder, red CHQ-WSB2 Wall
Sounder Beacon, red CHQ-CB ceiling Beacon or red CHQ-WB
wall beacon. The YBO-R/SCI(RED) does not use an address,
and has the same wiring configuration as the standard
YBN-R/3 Sensor Base making it very simple to install.
CHQ-WS2
An Addressable Loop-Powered Wall Sounder providing
8 volume levels and 51 tones with a maximum output
of up to 102 dB(A) (±2 dB(A)) with low current consumption.
Special bases available: YBO-R/3(RED), YBO-R/SCI(RED),
YBO-R/3(WHT) and YBO-R/SCI(WHT-SNDR).
• Colour matches with CHQ-WS2 Wall Sounder
and CHQ-WSB Wall Sounder Beacon
• Detects short circuits on loop
• Status LED
• Connection of up to 127 per loop
• Bayonet slot, low insertion force for detectors
• Loop powered
•S
ingle loop address
– addressed via the TCH-B100
hand held programmer
•V
ariable sound output 90 ~ 102 dB(A)
(±2 dB(A)) output at 1m
• Fits Hochiki standard or isolator base
• Weatherproof kit available
•5
1 user-selectable tones (all tones
AS7240.3 compatible)
• Auto-shutdown mode available*
* Please ensure Control Panel compatibility
• Approved to AS7240.3
CHQ-WSB2
An Addressable Loop-Powered Wall Sounder Beacon
as per the CHQ-WS2 but additionally featuring
an integral beacon within the horn which utilises
high intensity LED technology.
Special bases available: YBO-R/3(RED), YBO-R/SCI(RED),
YBO-R/3(WHT) and YBO-R/SCI(WHT-SNDR).
As per CHQ-WS2 plus:
• Variable flash frequency*
• High intensity LED technology
• Independent control of sounder and beacon*
• Auto-shutdown mode available
– can be set independently for sounder
or beacon*
* Please ensure Control Panel compatibility
• Approved to AS7240.23 – Category ‘O’
• Approved to AS7240.3
• Operating voltage 17-41/vdc
ANALOGUE ADDRESSABLE | 23
ANALOGUE SENSORS AND DEVICES FOR TAKTIS AND SYNCRO AS PANELS
WS2-WPK
A Weatherproof Back Box and Gasket Set for the CHQ-WS2
Wall Sounder and the CHQ-WSB Wall Sounder Beacon,
increases the IP rating of the sounder to IP65 for external use.
YBO-BS
An Addressable Loop-Powered Base Sounder providing
13 volume levels and 51 tones with a maximum output
of up to 98 dB(A) (±2 dB(A)) with low current consumption.
The unit is designed to fit either the YBN-R/3
or the YBO-R/3(SCI)* Bases.
(*From batch number 6044)
YBO-BSB2
An Addressable Loop-Powered Base Sounder Beacon
providing 13 volume levels and 51 tones with a maximum
output of up to 98 dB(A) (±2 dB(A)) with low current
consumption. The unit is designed to fit either
the YBN-R/3 or the YBO-R/3(SCI)* Bases.
(*From batch number 6044)
CHQ-AB
An Addressable Loop-Powered Beacon with high-intensity
LEDs and a Fresnel lens design which produces a highly visible
flash. The casing exactly matches the Hochiki Analogue Sensor
range in shape and colour providing seamless integration.
CHQ-ARI
An Addressable Loop-Powered Remote Indicator,
with high-intensity LEDs and a Fresnel lens design which
produces a highly visible signal. The casing exactly matches
the Hochiki Analogue Sensor range in shape and colour
providing seamless integration. The unit also features
two monitored inputs.
24 | ANALOGUE ADDRESSABLE
• Designed for CHQ-WS2 and CHQ-WSB
• Increases sounder IP rating from IP21
to IP65 (external use)
• Easy to install
• Loop powered
• Single loop address
– addressed automatically by Control
Panel or via the TCH-B100 hand
held programmer
• 50 ~ 98 dB(A) (±2 dB(A)) output at 1m
•F
its Hochiki standard or isolator base
and supports ESP sensors, beacons
and remote indicator
• 51 user-selectable tones
(all tones AS7240.3 compatible)
• Approved to AS7240.3
• Loop powered
• Single loop address, addressed by either
Control Panel or TCH-B100
• 50 ~ 98 dB(A) (±2 dB(A)) output at 1m
•F
its Hochiki standard or isolator base
and supports ESP sensors, beacons
and remote indicators
• 51 user-selectable tones
(all tones AS7240.3 compatible)
• Approved to AS7240.23 – Category ‘O’
• Approved to AS7240.3
• Operating voltage 17-41/vdc
• Beacons and sounders can be controlled
independently. Refer to page 32*
* Please ensure Control Panel compatibility
•
•
•
•
•
High Intensity LED technology
1 Hz flash frequency
Addressable via TCH-B100
Up to 127 devices per loop
Choice of 3 lens colours
(red, amber and blue)
• High Intensity LED technology
• Addressable via TCH-B100
• Up to 127 devices per loop
ANALOGUE SENSORS AND DEVICES FOR TAKTIS AND SYNCRO AS PANELS
CHQ-CB
An Addressable Loop-Powered Ceiling Beacon, with a high
intensity LED and a custom designed free-form optic which
produces a highly visible flash. Coverage diameters include
5m, 7.5m, 10m and 15m diameter*. The unit is designed to fit
the YBN-R/3, YBN-R/3(SCI), YBO-BS or the YBO-R/SCI(RED),
and is available in Red or White LEDs.
CHQ-WB
An Addressable Loop-Powered Wall Beacon, with a high
intensity LED and a custom designed free-form optic which
produces a highly visible flash. Coverage diameters include
5m, 7.5m, 10m and 15m diameter*. The unit is designed to fit
the YBN-R/3, YBN-R/3(SCI), YBO-BS or the YBO-R/SCI(RED),
and is available in Red or White LEDs.
CHQ-POM
A Powered Output Module designed to supply a nominal
24 Vdc at various, user-selectable current levels from
2 to 32 mA (in increments of 2 mA). The unit is small enough
to be added to other third-party devices thereby allowing
a range of equipment to be added to the Analogue loop.
The unit also features two monitored inputs.
CHQ-SIM
A Single Input Module designed to allow a single monitored
input to be connected to the Analogue loop. This provides
a compact, low-cost option where the installation of the larger
CHQ ‘Smart-Fix’ range of modules might be difficult.
CHQ-SOM
A Single Output Module has been designed to allow a single
relay output to be connected to the ESP loop. The unit
incorporates a volt-free relay contact that can be configured
as either N/O or N/C, the relay contact is rated to 30 Vdc
(max), 1 A (resistive load). The CHQ-SOM features three
colour-coded flying leads, the unit also features a wiring
terminal block for loop connection.
•
•
•
•
•
•
•
Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Choice of 2 LED colours (red and white)
Approved to AS7240.23 – Category ‘C’
Operating voltage 17-41 Vdc
• Loop Powered
• Single loop address via TCH-B100
• High Intensity LED technology
• 0.5/1 Hz flash frequency
• Choice of 2 LED colours (red and white)
• Approved to AS7240.23 – Category ‘W’
• Operating voltage 17-41 Vdc
•S
upplies a nominal 24 Vdc at various
current levels, 2 mA to 32 mA
in increments of 2 mA
• User-selectable current output
• Includes two monitored inputs
• Small design provides simple connectivity
to Analog loop for third-party devices
• Colour-coded flying leads
for simple installation
• Addressed with TCH-B100
Hand Held Programmer
• Includes a single monitored input
• Small design for simple provision
of a monitored input onto an analogue loop
• Flying leads for easy installation
• Addressed with TCH-B100 Hand
Held Programmer
• Includes a single monitored output
• Small design for simple provision
of a monitored output onto an ESP loop
• Flying leads for easy installation
• Addressed with TCH-B100 Hand
Held Programmer
ANALOGUE ADDRESSABLE | 25
ANALOGUE SENSORS AND DEVICES FOR TAKTIS AND SYNCRO AS PANELS
CHQ-DIM2(SCI)
A Dual Input Module designed to interface to a variety
of inputs such as door contacts, sprinkler flow/door switches
and plant equipment. Also available as a DIN Rail mountable
version. Both models feature an integral Short-Circuit Isolator.
CHQ-DRC2(SCI)
A Dual Relay Controller designed to provide two
general-purpose relay outputs. Each output can be
controlled independently and used to control dampers,
plant and equipment shutdown. The monitored input
can be used for local power supply fault monitoring
or as a general-purpose input. Also available as a DIN
Rail mountable version. Both models feature an integral
Short-Circuit Isolator.
CHQ-DZM2(SCI)
A Dual Zone Module designed to allow up to 60 conventional
detectors (30 per zone) to be interfaced to Hochiki’s Analogue
Addressable system. Also available as a DIN Rail mountable
version. Both models feature an integral Short-Circuit Isolator.
CHQ-MRC2(SCI)
A Mains Relay Controller providing a single, mains rated
relay output for the control of such devices as dampers,
extractors or plant and equipment shutdown. The monitored
input can be used for local power supply fault monitoring
or as a general-purpose input. Also available as a DIN
Rail mountable version. Both models feature an integral
Short-Circuit Isolator.
CHQ-PCM(SCI)
A Plant Control Module with four independent change-over
relay outputs, with N/O and N/C volt free contacts and four
inputs. These outputs can be driven separately by the fire alarm
Control Panel and can be used for the control of devices such
as dampers or for plant and equipment shutdown. Also available
as a DIN Rail mountable version. Both models feature an integral
Short-Circuit Isolator.
26 | ANALOGUE ADDRESSABLE
• Loop powered
• Single loop address
• Two independent inputs for monitoring
of volt-free contacts
• Each input can be configured to monitor
either normally open or normally closed contacts
• DIN Rail version available
• Both models feature an integral
Short-Circuit Isolator
• Loop powered
• Single loop address
• Two independently controlled changeover relays
• Relays contact rated at 30 Vdc at 1 amp
• Auxiliary monitored input
• DIN Rail version available
• Both models feature an integral
Short-Circuit Isolator
• Single loop address
• Supports two independent zones
of conventional detectors
• Both zones fully monitored
for short/open circuit
• Requires an auxiliary 24 Vdc supply
• DIN Rail version available
• Both models feature an integral
Short-Circuit Isolator
•
•
•
•
•
•
•
•
•
•
•
•
Loop-powered
Single loop address
Single mains rated relay contact
Relay contact rated at 250 Vac at 5 amp
(resistive) & 48 Vdc at 2 amp (resistive)
Auxiliary monitored input
Screw terminals & flying leads for easy
cable termination
DIN Rail version available
Both models feature an integral
Short-Circuit Isolator
Single loop address
Loop powered
4 change-over relay outputs
4 independent inputs for monitoring
of volt-free contacts
• Each input can be configured
to monitor either normally open
or normally closed contacts
• DIN Rail version available
• Both models feature an integral
Short-Circuit Isolator
ANALOGUE SENSORS AND DEVICES FOR TAKTIS AND SYNCRO AS PANELS
CHQ-DSC(SCI)
A Dual Sounder Controller, which has been designed
to provide two sounder outputs (that can be driven separately)
with full fault monitoring. The monitored input can be used
for local power supply fault monitoring or as a general-purpose
input and features an integral Short-Circuit Isolator.
CHQ-SZM2(SCI)
A Single Zone Monitor designed to allow up to 6 conventional
detectors to be interfaced to Hochiki’s Analogue Addressable
system. Also available as a DIN Rail mountable version.
Both models feature an integral Short-Circuit Isolator.
HCP-E(SCI)
A Manual Call Point Isolator fully compatible with Hochiki’s
Analogue Addressable protocol and featuring an integral
Short-Circuit Isolator (SCI). Features a bicoloured LED
to indicate either fire (red) or short-circuit (amber).
Also features plug-in wiring terminals for easy installation.
Note – requires SR-BACKBOX if surface mounted (sold separately).
• Single loop address
• Two independent sounder circuits
•E
ach circuit fully monitored for open
and short circuit faults
• Each alarm circuit fused at 1 amp
• Auxiliary monitored Input
•O
utputs are synchronised and can
be driven continuously or intermittently
• 24 Vdc auxiliary power required
• Features an integral Short-Circuit Isolator
• Loop powered
• Up to 6 conventional detectors
• Single loop address
• Remote LED output
•F
ully monitored for short
and open circuit faults
• DIN Rail version available
•B
oth models feature an integral
Short-Circuit Isolator
• Fast response
• Integral Short-Circuit Isolator
• Bicolour status LED
•N
on-frangible element fitted
as standard (conforms to EN54)
•A
ddressed with TCH-B100
Hand Held Programmer
• Surface or flush mounting
•W
eatherproof version available:
HCP-W(SCI)
An IP67 Weatherproof Manual Call Point Isolator fully
compatible with Hochiki’s Analogue Addressable protocol
and featuring an integral Short-Circuit Isolator (SCI).
Features a bicoloured LED to indicate either fire (red)
or short-circuit (amber). Also features plug-in wiring
terminals for easy installation.
• Fast response
• Integral Short-Circuit Isolator
• Bicolour status LED
•N
on-frangible element fitted
as standard (conforms to EN54)
•A
ddressed with TCH-B100
Hand Held Programmer
• IP67 rated
HINGED COVER (PS200)
• Easy to fit
• Protects against accidental activation
HCP-W(SCI)
An acylic hinged cover for the HCP-E(SCI) manual call point
range which protects against accidental operation/vandalism.
ANALOGUE ADDRESSABLE | 27
WIRELESS FIRE DETECTION
“
Hochiki’s FIREwave system raises wireless fire detection and alarm systems to new levels
of reliability and flexibility. The system utilises the latest wireless technology to provide
rapid, yet economic wireless fire system installations with minimal disturbance
to its surroundings. Ideal for historic buildings, remote sites and any project where
the installation of fire cabling is difficult, overly expensive or prohibited.
RSM-WTM-AS
A Wire to Wireless Translator Module which allows a wireless
fire detection system to be interfaced directly onto the loop.
Fully loop-powered, the unit can support up to 32 wireless
devices* or up to 7 RSM-EXP-AS Expander Modules**.
RSM-EXP-AS
A Wire to Wireless Expander Module which allows extended
signal coverage for the wireless system by boosting signal
strengths from translators, to cover larger buildings
for example. Up to 7 RSM-EXP-AS Expander Modules**
can be supported by a single RSM-WTM-AS Wireless
Translator Module.
• Loop powered
• Bi-directional wireless communication
•S
elf optimising wireless amplitude
and frequency
• Automatic wireless channel hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
• Exterior mounting protection
•M
akes additions to existing wired
systems easy and cost effective
• Approved to AS4428.9-2006, EN54-17, 18
• Bi-directional wireless communication
• Self optimising wireless amplitude
and frequency
• Automatic wireless channel hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
• Exterior mounting protection
• Makes additions to existing wired
systems easy and cost effective
• Requires external power supply (9 ~ 27 Vdc)
• Approved to AS4428.9-2006, EN54-18
*Maximum number of 16 output devices
such as A/V or output modules.
**Maximum of 5 child Expander Modules
connected in cascade or a maximum
of 3 child Expander Modules connected
directly to the Translator Module
or another Expander Module
28 | WIRELESS FIRE DETECTION
FIRE WAVE WIRELESS FIRE DETECTION
RSM-CIM-AS
A Wireless Conventional Interface Module which allows
a zone of wireless devices to be added to an existing
conventional zone (or as a stand-alone zone). The zone
is wired directly to the RSM-CIM-AS which is then in turn
supported by an RSM-EXP-AS Expander Module.
RSM-IP-AS
A Wireless Single Channel Input Module which allows
the on/off status (alarm/fault) of an external device
to be transmitted to a Control Panel wirelessly
via an RSM-CIM-AS, RSM-EXP-AS or RSM-WTM-AS.
RSM-OP-AS
A Wireless Single Channel Output Module which allows
the Control Panel to activate/switch the circuits of an external
device wirelessly via an RSM-EXP-AS or RSM-WTMAS.
The unit’s contacts can be configured to be normally open
or normally closed and switch at 30 Vdc/125 Vac at 2 A.
RSM-POM-AS
A Wireless Powered Output Module which allows the Control
Panel to activate/switch the circuits of an external device
or system wirelessly via an RSM-CIM-AS, RSM-EXP-AS
or RSM-WTM-AS. The unit’s contacts can be configured
to be normally open or normally closed and switch
at 30 Vdc/125 Vac at 2 A. The unit can be configured
to provide either a 12 Vdc or a 24 Vdc output.
RSM-CP-AS
A Wireless Resettable Manual Call Point which features
a simulated glass front. When activated, a plastic ‘flag’
is displayed in the window of the unit; the supplied
key will reset the flag and unit. Supplied with back box.
Weatherproof version also available (RSM-CP/W-AS).
• Bi-directional wireless communication
•S
elf optimising wireless amplitude
and frequency
• Automatic wireless channel hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
• Exterior mounting protection
• Makes
additions to existing wired
systems easy and cost effective
•R
equires external power supply
for use as stand-alone zone
• Approved to AS4428.9-2006, EN54-18
• Input circuits are monitored
for fire and fault conditions
• Bi-directional wireless communication
•S
elf optimising wireless amplitude
and frequency
• Automatic wireless channel hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
•M
akes additions to existing wired
systems easy and cost effective
• Approved to AS4428.9-2006, EN54-18
• Contacts can be configured as N/O or N/C
• Bi-directional wireless communication
•S
elf optimising wireless amplitude
and frequency
• Automatic wireless channel hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
•M
akes additions to existing wired
systems easy and cost effective
• Requires external power supply
• Contacts can be configured as N/O or N/C
• Selectable output – 12 Vdc or 24 Vdc
• Bi-directional wireless communication
•S
elf optimising wireless amplitude
and frequency
• Automatic wireless channel hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
•M
akes additions to existing wired
systems easy and cost effective
• Approved to AS4428.9-2006, EN54-18
• Bi-directional wireless communication
• Fully intelligent
•U
tilises standard low cost lithium
battery technology
• Long battery life
• Resettable Element
• Clear ‘device activated’ warning flag
• High reliability
• Automatic channel hopping
•S
elf optimising wireless amplitude
and frequency
• Weatherproof version available
•A
pproved to AS7240.11-2008,
AS4428.9-2006
WIRELESS FIRE DETECTION | 29
FIRE WAVE WIRELESS FIRE DETECTION
ROD-E-AS
A Wireless Intelligent Photoelectric Smoke Sensor
with a patented smoke chamber ensuring optimal
smoke sensitivity with increased protection from airborne
contamination and background illumination. The sensor
is fitted with a single omni-directional LED and a reed
switch facility allowing testing using a magnet.
RHD-E-AS
A Wireless Intelligent Rate of Rise Heat Sensor
with a thermistor sensing element. The sensor is fitted
with a single omni-directional LED and a reed switch
facility allowing testing using a magnet.
RMD-E-AS
A Wireless Intelligent Multi Sensor with a patented smoke
chamber and thermistor heat sensing element. The sensor
is fitted with a single omni-directional LED and a reed
switch facility allowing testing using a magnet.
RSM-WS-AS (RED)
A Wireless Intelligent Wall Sounder providing 3 tones
with an adjustable volume level up to a maximum output
of 100 dB(A). Also available in white, RSM-WS-AS(WHT).
RSM-WS/W-AS (RED)
A Wireless Intelligent Weatherproof Wall Sounder providing
3 tones with an adjustable volume level up to a maximum output
of 100 dB(A). Also available in white, RSM-WS/W-AS(WHT).
30 | WIRELESS FIRE DETECTION
• Patented smoke chamber design
• Bi-directional wireless communication
• Adaptive signal processing helps
with the elimination of false alarms
• Automatic wireless channel hopping
• Fully intelligent with high reliability
and sensitivity
• Flexible on site device adjustment
• Makes additions to existing wired
systems easy and cost effective
• Approved to AS7240.7-2004,
AS4428.9-2006
• Thermistor-type heat sensing element
• Bi-directional wireless communication
• Adaptive signal processing helps
with the elimination of false alarms
• Automatic wireless channel hopping
• Fully intelligent with high reliability
and sensitivity
• Flexible on site device adjustment
• Makes additions to existing wired
systems easy and cost effective
• Approved to AS7240.5-2004 class
A1R, AS4428.9-2006
• Detects smoke and/or heat
• Bi-directional wireless communication
• Adaptive signal processing helps
with the elimination of false alarms
• Automatic wireless channel hopping
• Fully intelligent with high reliability
and sensitivity
• Flexible on site device adjustment
• Makes additions to existing wired
systems easy and cost effective
• Approved to AS7240.5/7-2004,
AS4428.9-2006
•
•
•
•
Tones, adjustable volume up to 100 dB(A)
3
Bi-directional wireless communication
Automatic wireless channel hopping
Easy and cost-effective additions
to existing wired systems
• Approved to AS4428.9-2006, EN54-3
• IP21C
•
•
•
•
3 Tones, adjustable volume up to 100 dB(A)
Bi-directional wireless communication
Automatic wireless channel hopping
Easy and cost-effective additions
to existing wired systems
• Approved to AS4428.9-2006, EN54-3
• IP66
FIRE WAVE WIRELESS FIRE DETECTION
RSM-WSB-AS (RED)
A Wireless Intelligent Wall Sounder Beacon providing
5 tones with an adjustable volume level up to a maximum
output of 100 dB(A). Also provides a flash rate/light output
of 1 Hz/1 Cd and is available in white, RSM-WSB-AS(WHT).
RSM-WSB/W-AS (RED)
A Wireless Intelligent Weatherproof Wall Sounder
Beacon providing 5 tones with an adjustable volume
level up to a maximum output of 100 dB(A).
Also provides a flash rate/light output of 1 Hz/1 Cd
and is available in white, RSM-WSB/W-AS(WHT).
RSM-BS-AS
A Wireless Intelligent Base Sounder providing 32 tones
as standard with a volume range of between 90.1 to 92.4 dB(A)
at 1m. The pre-moulded base will accommodate any type
of FIREwave wireless detector, or a locking cover plate
(RSM-C-AS).
RSM-BSB-AS
A Wireless Intelligent Base Sounder Beacon providing
32 tones as standard with a volume range of between 90.1
to 92.4 dB(A) at 1m and a 1 Hz flash rate. The pre-moulded
base will accommodate any type of FIREwave wireless
detector, or a locking cover plate (RSM-C-AS).
RSM-BSC
• 5 Tones, adjustable volume up to 100 dB(A)
• Flash rate/light output of 1 Hz/1 Cd
• Bi-directional wireless communication
• Automatic wireless channel hopping
•E
asy and cost-effective additions
to existing wired systems
• Approved to AS4428.9-2006, EN54-3
• IP21C
• 5 Tones, adjustable volume up to 100 dB(A)
• Flash rate/light output of 1 Hz/1 Cd
• Bi-directional wireless communication
• Automatic wireless channel hopping
•E
asy and cost-effective additions
to existing wired systems
• Approved to AS4428.9-2006, EN54-3
• IP66
•3
2 Tones, adjustable volume
from 90.1 to 92.4 dB(A)
• Bi-directional wireless communication
• Automatic wireless channel hopping
•E
asy and cost-effective additions
to existing wired systems
• Approved to AS4428.9-2006, EN54-3
• 32 Tones, adjustable volume from 90.1
to 92.4 dB(A)
• Flash rate of 1 Hz
• Bi-directional wireless communication
• Automatic wireless channel hopping
• Easy and cost-effective additions
to existing wired systems
• Approved to AS4428.9-2006, EN54-3
• Easy to fit
A Protective Lockable Cap which can be fitted
to the RSM-BSB-AS and RSM-BS-AS wireless base
sounders when either of these devices isn’t fitted
with a sensor.
WIRELESS FIRE DETECTION | 31
ANALOGUE SENSORS FOR FIRENET,
NFP, PHOENIX PANELS
ALK-AS
A Photoelectric Smoke Sensor incorporating Hochiki’s unique
High Performance Chamber which allows the sensor threshold
level to be increased, thereby improving the signal to noise
ratio and reducing susceptibility to false alarms.
•
•
•
•
•
•
High Performance Chamber
Twin fire LEDs allow 360° viewing
Locking mechanism (sensor to base)
Variable sensitivity
Electronically addressed
Compatible bases: YBN-R/2NA, YBO-BS,
YBO-BSB, YBN-R/3(SCI)
• Approved to AS7240.7
A Multi-Sensor incorporating a thermal element
and a High Performance Photoelectric Smoke Chamber.
•
•
•
•
•
•
ACB-AS
• User selectable modes
• Incorporates fixed temperature
A Multi-Heat Sensor incorporating a variable fixed temperature
heat element and a rate of rise heat element, both controlled
from the Control Panel allowing either thermal element
or both elements simultaneously to be active in making
the fire decision.
and rate of rise heat elements
• Twin fire LEDs allow 360° viewing
• Electronically addressed
• Compatible bases: YBN-R/2NA,
YBO-BS, YBO-BSB, YBN-R/3(SCI)
• Approved to AS1603.1. Class A, B, C and D
ACB-ASW
• User selectable modes
• Incorporates Fixed temperature
and rate of rise heat elements
• Twin fire LEDs allow 360° viewing
• Electronically addressed
• IP67 rated
• Supplied with fixing base
• Approved to AS1603.1 Class A, B, C and D
ACA-E
An IP67 Rated Waterproof Multi-Heat Sensor which can
be used externally and is supplied with its own fixing base
which is used to fix the sensor. Flying leads from the sensor
connect directly to the loop via waterproof connectors.
YBN-R/2NA
A Common Mounting Base which is fully compatible with
ALK-AS, ACA-E and ACB-AS sensors. Supplied with square
cable clamps for secure and reliable cable termination
and is also capable of driving a remote LED if required.
32 | ANALOGUE SENSORS FOR FIRENET, NFP, PHOENIX PANELS
High Performance Chamber
Incorporates optical & heat elements
Twin fire LEDs allow 360° viewing
Variable sensitivity
Electronically addressed
Compatible bases: YBN-R/2NA, YBO-BS,
YBO-BSB, YBN-R/3(SCI)
• Approved to AS1603.1, AS1603.2
• Electronics free
• Stainless steel contacts
• Takes 2.5mm2 cables
• Slim profile – only 8mm
• Rugged wiring contacts
• Facility for remote indicator
•Q
uick connection via square cable clamps
NEW VISUAL ALARM DEVICES
KEY FEATURES OF THE HOCHIKI RANGE OF AS7240.23 COMPLIANT VADS
•T
he new Wall and Ceiling Beacons in our new
AS7240.23 compliant range are available with
either red or white LEDs offering additional
flexibility to the end-installer when deciding
on the requirements of each installation
•T
he AS7240.23 ratings of these Beacons
(the brightness of the LEDs – which affects
the area that is illuminated) can be adjusted
on each model from the control panel*.
This reduces the number of devices required
in the range as each one can produce up
to three different ratings making it easier
to choose the right VAD for the task.
•T
he circuitry in our new Wall and Ceiling Beacons
is continually monitored to ensure that it is still
functioning. A malfunctioning device will show
at the panel as a fault saving time and effort
on maintenance inspections*.
•T
he control panel can be programmed to perform
an automatic daily LED check on our Wall and Ceiling
Beacons, consisting of a lower power single flash,
recorded by the in-built sensor. This reduces
the probability of a failure on demand, just when
the device is needed. A failure is indicated
at the panel**.
•O
ur new Wall and Ceiling Beacons have the ability
to be powered externally from a separate 24V
power supply. This means for projects that require
many VADs the loop current isn’t drained by the
LEDs when they are activated (meaning more
devices on the loop is possible)**.
• Custom-designed lens
• LED technology
•O
utdoor variants available (used with the wall
sounder weatherproofing kit)
•W
hen in operation, these Beacons monitor the
LED light output via a separate sensor to ensure
that a flash occurs, again saving time on scheduled
walk-tests. A failure to operate is indicated
as a fault at the panel**.
CHQ-CB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which produces
a highly visible flash. Coverage diameters
include 5m, 7.5m, 10m and 15m diameter*.
The unit is designed to fit the YBN-R/3,
YBN-R/3(SCI), YBO-BS or the YBO-R/SCI
(RED), and is available in Red or White LEDs.
•
•
•
•
•
•
•
•
•
•
Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and white)
Approved to AS7240.23 – Category ‘C’
High efficiency
Selectable light output**
Operating voltage 17-41 Vdc
PRODUCT MODEL INFORMATION
TYPE
CEILING
BEACONS
BASE MODELS
LED COLOUR
PRODUCT COLOUR
CHQ-CB/WL
WHITE
IVORY
CHQ-CB(WHT)/WL
WHITE
WHITE
CHQ-CB(RED)/WL
WHITE
RED
CHQ-CB/WL-15
WHITE
IVORY
CHQ-CB(WHT)/WL-15
WHITE
WHITE
CHQ-CB(RED)/WL-15
WHITE
RED
CHQ-CB/RL
RED
IVORY
CHQ-CB(WHT)/RL
RED
WHITE
CHQ-CB(RED)/RL
RED
RED
*0.5Hz flash frequency white LED **Panel compatibility dependent
NEW VISUAL ALARM DEVICES | 33
NEW VISUAL ALARM DEVICES
CHQ-WB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which produces
a highly visible flash. The unit is designed
to fit the YBN-R/3, YBN-R/3(SCI), YBO-BS
or the YBO-R/SCI(RED), and is available
in Red or White LEDs.
TYPE
WALL
BEACONS
BASE MODELS
• Loop Powered
• Single loop address via TCH-B100
• High Intensity LED technology
• 0.5/1 Hz flash frequency
• Addressable via TCH-B100
• Choice of 2 LED colours (red and white)
• Approved to AS7240.23 – Category ‘W’
• High efficiency
• Selectable light output**
• Operating voltage 17-41 Vdc
LED COLOUR
PRODUCT COLOUR
CHQ-WB/WL
WHITE
IVORY
CHQ-WB(WHT)/WL
WHITE
WHITE
CHQ-WB(RED)/WL
WHITE
RED
CHQ-WB/RL
RED
IVORY
CHQ-WB(WHT)/RL
RED
WHITE
CHQ-WB(RED)/RL
RED
RED
**Panel compatibility dependent
YBO-BSB2
An Addressable Loop-Powered Base
Sounder Beacon, providing 13 volume
levels and 51 tones with a maximum output
of up to 98 dB(A) (±2 dB(A)) with low
current consumption. The unit is designed
to fit either the YBN-R/3, YBN-R/SCI Bases.
TYPE
BASE
SOUNDER
BEACONS
BASE MODELS
• Loop Powered
• Single Loop Address, addressed by either
Control Panel or TCH-B100
• 50 ~ 98 dB(A) (±2 dB(A)) output at 1m
• Fits Hochiki Standard or Isolator Bases and
supports ESP Sensors and Remote Indicator
• 51 User-Selectable Tones
(all tones AS7240.3 compatible)
• Beacon and Sounder can be
controlled independently**
• Approved to AS7240.23 – Category ‘O’
• Approved to AS7240.3
• Operating voltage 17-41 Vdc
LED COLOUR
PRODUCT COLOUR
YBO-BSB2/WL
WHITE
IVORY
YBO-BSB2(WHT)/WL
WHITE
WHITE
YBO-BSB2/RL
RED
IVORY
YBO-BSB2(WHT)/RL
RED
WHITE
**Panel compatibility dependent
CHQ-WSB2
An Addressable Loop-Powered Wall
Sounder Beacon, as per the CHQ-WS2
but additionally featuring an integral beacon
within the horn which utilises high intensity
LED technology.
Special bases available: YBO-R/3(RED),
YBO-R/SCI(RED), YBO-R/3(WHT)
and YBO-R/SCI(WHT-SNDR).
TYPE
WALL
SOUNDER
BEACONS
BASE MODELS
LED COLOUR
PRODUCT COLOUR
CHQ-WSB2/WL
WHITE
RED
CHQ-WSB2(WHT)/WL
WHITE
WHITE
CHQ-WSB2/RL
RED
RED
CHQ-WSB2(WHT)/RL
RED
WHITE
**Panel compatibility dependent
34 | NEW VISUAL ALARM DEVICES
As per CHQ-WS2 plus:
• Variable flash frequency
• High Intensity LED technology
• Independent control of Sounder and Beacon
• Auto-shutdown Mode available – can be
set independently for sounder or beacon**
• Approved to AS7240.23 – Category ‘O’
• Approved to AS7240.3
• Operating voltage 17-41 Vdc
CHOOSING YOUR VAD
ANALOGUE AND CONVENTIONAL
With the wide choice of VAD variants available,
it might seem a daunting task to identify the best
unit for the application. Therefore we have devised
this simple configuration table which allows you
to source the correct VAD by answering questions
and following the branches to the appropriate device
variant. Simply select the VAD type, then the case
colour and finally the LED colour. The ratings column
allows you to check the coverage volume settings
available. Coverage volumes are selected via the CIE*.
ANALOGUE
WHAT TYPE OF VAD?
WHICH CASE COLOUR
IVORY CASE
BASE SOUNDER
BEACON
WHITE CASE
RED CASE
WALL SOUNDER BEACON
WHITE CASE
IVORY CASE
CEILING
BEACON
WHITE CASE
RED CASE
IVORY CASE
WALL
BEACON
WHITE CASE
RED CASE
WHICH LED COLOUR
PRODUCT
WHITE LEDS
YBO-BSB2/WL
RED LEDS
YBO-BSB2/RL
WHITE LEDS
YBO-BSB2(WHT)/WL
RED LEDS
YBO-BSB2(WHT)/RL
WHITE LEDS
CHQ-WSB2/WL
RED LEDS
CHQ-WSB2/RL
WHITE LEDS
CHQ-WSB2(WHT)/WL
RED LEDS
CHQ-WSB2(WHT)/RL
RED LEDS
CHQ-CB/RL
WHITE LEDS
CHQ-CB/WL
CHQ-CB/WL-15
RED LEDS
CHQ-CB(WHT)/RL
WHITE LEDS
CHQ-CB(WHT)/WL
CHQ-CB(WHT)/WL-15
RED LEDS
CHQ-CB(RED)/RL
WHITE LEDS
CHQ-CB(RED)/WL
CHQ-CB(RED)/WL-15
WHITE LEDS
CHQ-WB/WL
RED LEDS
CHQ-WB/RL
WHITE LEDS
CHQ-WB(WHT)/WL
RED LEDS
CHQ-WB(WHT)/RL
WHITE LEDS
CHQ-WB(RED)/WL
RED LEDS
CHQ-WB(RED)/RL
CONVENTIONAL
WHAT TYPE OF VAD?
WHICH CASE COLOUR
WHICH LED COLOUR
IP65
PRODUCT
NO
CWST-WW-S5
YES
CWST-WW-W5
NO
CWST-WR-S5
YES
CWST-WR-W5
NO
CWST-RW-S5
YES
CWST-RW-W5
NO
CWST-RR-S5
YES
CWST-RR-W5
WHITE LEDS
WHITE CASE
RED LEDS
CONVENTIONAL BEACON
WHITE LEDS
RED CASE
RED LEDS
NEW VISUAL ALARM DEVICES | 35
TECHNOLOGY GUIDE
AUDIO AND VISUAL PRODUCTS
YBN-R/3(SCI)
YBN-R/3
Short-Circuit
Isolator Base
Standard Base
Multi
Sensor
ACB-ASN
Multi-Heat
Sensor
This chart shows how the YBO-BS
Base Sounder and the YBO-BSB2
Base Sounder Beacon connects
to bases, sensors and audio/visual
devices in the Hochiki ESP Range.
YBO-BSB2
YB0-BS
Base Sounder
Beacon
Base Sounder
ACA-ASN
YBO-BS BASE SOUNDER
AND YBO-BSB2 BASE SOUNDER
BEACON CONNECTIVITY
ALK-ASN
CHQ-ARI
Photoelectric
Smoke Sensor
Remote
Indicator
CHQ-CB
SI-CAP
Cover
WS2-WPK
Weatherproofing
Kit
CHQ-WS2 WALL SOUNDER
& CHQ-WSB WALL SOUNDER
BEACON CONNECTIVITY
This chart shows how the
CHQ-WS2 and CHQ-WSB2
connects to bases and the
weatherproofing kit.
YBO-R/3(RED)
&
YBO-R/SCI(RED)
Bases
CHQ-WS2
Wall Sounder
&
CHQ-WSB2
Wall Sounder Beacon
INTERNAL USE
36 | TECHNOLOGY GUIDE
EXTERNAL USE
AUDIO AND VISUAL PRODUCTS
ADDRESSING THE YBO-BS, YBO-BSB2, CHQ-WS2
AND CHQ-WSB2
LOSS OF DECIBELS − SOUNDER FREQUENCY RANGE
Light Street Noise
The default address of these units is 254.
If the YBO-BS or YBO-BSB2 is to be used as a base
sounder (sensor, beacon or remote indicator on top)
then the address will not need to be changed, as the
control panel will automatically address the sounder
as described below. However, if the sounder is to be
used purely as a wall sounder then the unit will need
to be manually addressed between 1 and 127
as described below.
Average Office Noise
Stockroom Noise
Light Assembly Room Noise
Shipping Room Noise
Heavy Street Noise
Heavy Assembly Room Noise
Light Machine Shop Noise
Punch Press Room Noise
Boiler Factory Noise
AUTOMATIC ADDRESSING (BY CONTROL PANEL)
The control panel automatically assigns the address
to the base sounder during initialisation. The address
is calculated by taking the address of the sensor
that is fitted to the base sounder and adding 127,
this is then stored within the base sounder. For example,
if a sensor is set at address 10 then the base sounder
would be automatically set at address 137 (Addresses
above 127 may not be visible to the user depending
upon the implementation by the Control Panel).
MANUAL ADDRESSING (BY HAND HELD PROGRAMMER)
Whisper @ 1m
Casual
Conversation @ 1m
Heavy Machine Shop Noise
Hammering Threshold
on Steel
of Pain
10 40 50 60 70 80 90 100 110 120 130140
dB (A)
Adjustments to a Sounder’s maximum volume level
should be made depending on the frequency range
of the Sounder:
SOUNDER FREQUENCY RANGE
ADJUSTMENT
UP TO 500Hz
LOSE 0 dB(A)
500Hz TO 1000Hz
LOSE 3 dB(A)
1000Hz TO 2000Hz
LOSE 5 dB(A)
The address can also be set using the Hand Held
Programmer (TCH-B100) between 1 and 254. See the
TCHB100 instructions for further details on the address
setting process. If the YBO-BS or YBO-BSB2 is to be
used as a wall sounder then the address should be
programmed between 1 and 127 before being installed.
When installed vertically as a wall sounder these
devices should also be fitted with an additional cover,
the SI/CAP.
LOSS OF DECIBELS − SURFACES
The type of surfaces that predominate in the location
of the Sounder will affect the maximum Sounder
volume level:
HARD FINISHES
Solid stone or brick walls
Solid ceilings
Stone or tiled flooring
LOSE 0 dB(A)
MEDIUM
FINISHES
Acoustic ceiling tiles
Plastered walls
5% Soft coverings
Composite flooring
(eg. Laminate)
LOSE 8 dB(A)
SOFT FINISHES
Aucoustic ceiling tiles
Plastered walls
5% Soft covering
Carpeted flooring
LOSE 9 dB(A)
For example, a Sounder producing 95dB(A) @ 1 metre
mounted within an area predominately furnished with
soft finishes will actually only produce 86dB(A) @ 1 metre.
TECHNOLOGY GUIDE | 37
AUDIO AND VISUAL PRODUCTS
LOSS OF DECIBELS − OTHER CONSIDERATIONS
•S
ubtract 3dB(A) from Sounder’s maximum
volume level for safety margin – allowing for
manufacturers tolerances.
TIP
here is an inherent loss of volume through doors,
•T
lose 17dB(A) through normal doors, lose 27dB(A)
through fire doors.
Use the maximum Sounder volume level taking
into account the Sounder’s frequency range
and the loss of volume through surfaces and
doors as described above before calculating
loss over distance:
LOSS OF DECIBELS − OVER DISTANCE
This table shows the decrease in Sounder volume
over distance.
M
dB(A)
85
90
92
94
96
98
100
102
104
106
108
110
112
114
116
118
120
122
124
126
128
130
2
59
64
74
79
84
86
88
90
92
94
96
98
100
102
104
106
108
110
112
114
116
118
120
122
124
3
55
60
70
75
80
82
84
86
88
90
92
94
94
98
100
102
104
106
108
110
112
114
116
118
120
5
51
56
66
71
76
78
80
82
84
86
88
90
92
94
96
98
100
102
104
106
108
110
112
114
116
10
45
50
60
65
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
102
104
106
108
110
20
39
44
54
59
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
102
104
30
35
40
50
55
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
50
~
36
46
51
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
~
40
45
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
~
39
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
~
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
~
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
~
~
~
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
~
~
~
38
40
42
44
46
48
50
52
54
56
58
60
62
64
~
~
38
40
42
44
46
48
50
52
54
56
58
60
~
~
38
40
42
44
46
48
50
52
54
56
100
200
300
500
1000
2000
3000
100 dB(A)
5000
68 dB(A)
80
74 dB(A)
70
80 dB(A)
65
86 dB(A)
1
This loss can be calculated with the following formula:
XDB(A) @ Y METRES = (X-6)DB(A) @ 2Y METRES
For example:
100dB(A) @ 1 metre = (100-6)dB(A) @ 2 metres
100dB(A) @ 1 metre = 94dB(A) @ 2 metres
38 | TECHNOLOGY GUIDE
5M
10M
20M
40M
CHQ ‘SMART FIX’ MODULES
CHQ ‘SMART FIX’ MODULES
Hochiki’s CHQ “Smart-Fix” input/output interface modules are compactly designed for the monitoring
and control of external equipment from the loop utilising Hochiki’s unique ultra intelligent noise-immune
communications – ESP (‘Enhanced System Protocol’). The “Smart-Fix” housing system offers the installer
complete flexibility with a choice of fixing configurations.
The CHQ Range includes Switch Monitors,
Conventional Zone Monitors, Relay Outputs (24V
and 240V) and Sounder Outputs and a combination
of both inputs and outputs are available on the same
device. Each Input/Output unit requires only one loop
address and any combination of units can be installed
within the maximum address range.
Ruggedly packaged, the CHQ “Smart-Fix” range
offers greater flexibility during installation with various
configurations available including a choice of white
or semi-opaque lids, weather-proof back box and
adaptor for retro-fit projects. All CHQ modules
also come as a DIN Rail mountable version and all
variants can be supplied with or without an integral
short-circuit isolator.
DIN Rail Version
MODULE
Lid also
available
in white
CHQ-LID(WHT)
CHQ-ADAPTOR
CHQ-BACKBOX
Designed to allow the “Smart-FIx”
range of modules to be housed
within existing enclosures originally
designed for the first generation
CHQ-OEM modules by modifying
the “footprint” of the unit. Simply
unclip the PCB from the the module
and clip onto the CHQ-ADAPTOR.
Provides 10 glanded cable entry
knockouts (glands not included)
and increases the IP rating
of the module from IP21 to IP65.
Simply screw module to backbox
with supplied bolts.
TECHNOLOGY GUIDE | 39
CHQ ‘SMART FIX’ MODULES
CHQ-DSC DUAL SOUNDER CONTROLLER
The CHQ-DSC has been designed to provide
two sounder outputs with full fault monitoring.
The monitored input can be used for local
power supply fault mon i tor ing or as a general
purpose input. The input and both sounder
outputs only need the allocation of one ESP
loop address.
CHQ-SZM2 SINGLE ZONE MODULE
6 x Conventional Detectors
The CHQ-SZM2 has been designed
to interface to a small conventional zone,
allowing up to 6 conventional smoke
and heat detectors or one beam smoke
detector to be interfaced with the ASX
Range of analogue products on ESP systems.
The unit also provides a remote alarm
output for local indication.
1 x Conventional Beam Detector
CHQ-DRC2 DUAL RELAY CONTROLLER
The CHQ-DRC2 has been designed
to provide two general purpose relay
outputs. Each output can be separately
driven for control of devices such
as dampeners or for the control of plant
and equipment shutdown. The general
purpose monitored input can be used
for local fire and fault monitoring.
The input and both relay outputs only
require the allocation of one ESP
loop address.
40 | TECHNOLOGY GUIDE
Machine Shutdown
( 30V DC 1A )
Valve Shutdown
( 30V DC 1A )
Emergency Exit Monitoring
CHQ ‘SMART FIX’ MODULES
Sprinkler Flow Switch
CHQ-DIM2 DUAL INPUT MODULE
The CHQ-DIM2 has been designed to interface
to a variety of inputs such as door contacts,
sprinkler flow/door switch es and plant
equipment faults. The unit is particularly suited
to applications where fast response is required
to the input change as with remote fire inputs.
CHQ-MRC2 MAINS RELAY CONTROLLER
The CHQ-MRC2 has been designed primarily
to provide switching of mains. This capability
allows plant to be shut down directly from
the loop, without the need for additional power
supplies. The general purpose monitored input
can be used for local fire and fault monitoring.
Escalator Shutdown
( 240V AC 5A )
ZONE 1
ZONE 2
CHQ-DZM2 DUAL ZONE MODULE
The CHQ-DZM2 has been designed to interface
to two independent zones of conventional
detectors, allowing conventional smoke
and heat detectors or beam smoke detectors
to be interfaced with ESP Range products
on ESP sys tems. The unit provides an auxiliary
output for local alarm indication.
30 x Conventional
Detectors
3 x Conventional
Beam Detectors
INPUT/OUTPUT
LOOP CABLES
AUXILIARY POWER
24Vd.c
TECHNOLOGY GUIDE | 41
HIGH PERFORMANCE CHAMBER TECHNOLOGY
“
Typically photoelectric smoke sensors/detectors have been more sensitive to smoke emitted
by smouldering fires and less sensitivity to smoke emitted from flaming fires (see fig 5 on page 43).
Generally if the sensitivity to the flaming fire is improved, the sensitivity to the smouldering
fire would become very high, significantly increasing the possibility of unwanted alarms.
CHAMBER DESIGN
To produce a stable smoke sensor/detector with the
minimum of unwanted alarms the sensitivity to smoke
produced in smouldering fires should be reduced rather
than increased. To overcome this problem Hochiki
undertook a major research project to examine
the key parameters of light scattering principals.
design could minimise the differences in sensitivity
to smoke particles produced by flaming and
smouldering fires. By honing this angle, Hochiki
developed a High Performance optical chamber that
would be more equally responsive to all smoke types:
Hochiki’s research found that by redesigning the
internal optical angle and chamber structure within
the photoelectric smoke sensor/detector, the chamber
SLV-AS3 / ALK-ASN /
ACA-ASN
SLK-A
(original chamber design)
Original angle of internal
optics resulted in a different
response to each test fire
(current chamber design)
Current angle of internal
optics results in a consistent
response to each test fire
SMOKE DETECTION PRINCIPLES
When a light source (incident light) hits a smoke
particle it is deflected and becomes scattered light,
fig 1
Wider Scattering
Angle
As the Scattering Angle increases
the relative sensitivity of the smoke
sensor/detector to the type of fire
is reduced, allowing the sensor to give
a flatter response across the different test
fires (see fig 4 on page 43). The amount
of ‘backscatter‘ is dependent on particle
size and colour smoke.
42 | TECHNOLOGY GUIDE
generally known as “backscatter“. The angle at which
this light is scattered is known as the Scattering Angle.
fig 2
fig 3
The above diagram represents
the intensity and scattering
angle for kerosene smoke
particles, the test for flaming
fires producing black smoke.
Note the low intensity.
The above diagram represents
the intensity and scattering
angle for paper smoke particles,
the test for smouldering fires
producing white smoke. Note the
higher intensity and wider angle.
HIGH PERFORMANCE CHAMBER TECHNOLOGY
This new generation of photoelectric smoke
chamber gives very similar sensitivity results
to that of an ionisation smoke chamber,
allowing Hochiki to phase out ionisation detection
(an environmentally unfriendly technology) in the
majority of cases. When considering the recent
regulations brought in under the ‘RAMRoad’,
the Radioactive Material (Road Transport)
Regulations 2002, which are imposing stringent
safeguarding controls on distribution of products
employing ionisation technology, High Performance
optical technology provides an alternative solution.
HOCHIKI HIGH PERFORMANCE PHOTOELECTRIC SMOKE DETECTOR
fig 4
EXISTING TYPICAL OPTICAL
TYPICAL IONISATION
wood smoke
This chamber design has also removed the
requirement for additional thermal elements
to achieve the high performance which generally
add cost and complexity to the product.
This then allows the thermal elements to be used
to supply additional functionality (for example
the ACA-E multi-sensor).
cigarette smoke
pine resin smoke
black carbonsmoke
PARTICLE SIZES
burning pigment smoke
This innovative chamber design has been used both
in Hochiki’s conventional detector (SLV-AS3,
SLV-AS)and analogue sensors (ALK-ASN and ACA-E)
and this change has allowed these Photoelectric
smoke detectors and sensors to exceed the AS7240
part 7 standard. The illustration on the right (fig 4)
shows the effect of this in a more practical form,
showing the causes of smoke in terms of particle
sizes and the ability of Hochiki’s High Performance
optical smoke chamber to detect the widest range
of particles. It can be seen that the performance
of Hochiki’s High Performance optical detector
exceeds the combination of both the typical
optical and ionisation smoke detectors.
zinc-oxide smoke
magnesium-oxide smoke
LARGER
PARTICLE SIZE
SMALLER
The Sensitivity Response graph below (fig 5) shows
the response to the AS7240 test fires and the sensitivity
of the Hochiki Photoelectric Smoke Detectors against
a typical ionisation smoke detector.
fig 5
SENSITIVITY RESPONSE TO AS7240 PART 7 TEST FIRES
60%
Current technology photoelectric detector
50%
Current technology ionisation sensor
OBSCURATION
40%
Hochiki Photoelectric Smoke Sensor
with High Performance Chamber Technology
30%
20%
10%
0%
TF1
Open wood
TF2
Smouldering
wood
TF4
Plastic
TF3
Cotton
TF5
Liquid
(n-heptane)
TF6
Liquid
(methylated spirits)
TEST FIRES
TECHNOLOGY GUIDE | 43
SIGMA CP PANEL WITH HOCHIKI
CONVENTIONAL CONTROL PANEL
Control Panel is manufactured by Hochiki Group Company,
Kentec Electronics Ltd. and distributed by Incite fire Pty Ltd.
PROGRAMMABLE FUNCTIONS
OPTIONS
Simple Menu Options
• Adjustable sounder time delay
• Sounder configuration options
• Coincidence input selection
• I.S. barrier selection by zone
• Short circuit by fire zone
• Non latching zones
• Silent zones
• Zone input delay
• General panel configuration
Australian Interface Module
• Additional outputs, alarm, fault & disablement
• Door holder output (time delay release option)
with 1A contact rating
• ACF monitored output and control
44 | CONVENTIONAL
Manual Call Point
• MCP fitted to front of cabinet
Occupant Warning System
8way Relay Card
SIGMA CP OVERVIEW
The Sigma CP range consists of a series of fire alarm
control panels designed in accordance with Australian
Standards AS7240.2 and AS7240.4 Fire Detection and
Fire Alarm Systems – Control & indicating equipment
The range consists of 2, 4 and 8 zone control panels.
The zones are selectable for either:
•Standard Zone – Detectors and call points
arewired on separate circuits (cables)
to the sounders (2 sounder circuits are provided)
•2-Wire Zone – Detectors, call points and
sounders are wired to the same pair of cables,
commonly referred to as a two wire system
Wiring sounders to the detection circuit eliminates
the need to install sounder circuit cables and also
offers the ability to provide zoned or two stage
sounder operation
Note: When using the two wire system, compatible
Hochiki detectors and call points must be used.
All sounders must be polarised.
TECHNICAL
Construction
1.2MM MILD SHEET STEEL
Finish
EPOXY POWDER COATED
Colour – lid & box
BS 00 A 05 GREY – FINE TEXTURE
Colour – controls
plate & labels
RAL 7047 LIGHT GREY – SATIN
Supply voltage
230V AC +10%/-15%
(100 WATTS MAXIMUM)
Mains supply fuse
1.6 AMP (F1.6A L250V)
Power supply DC rating
24V 3AMP
Maximum battery size
7AH 12V (2 PER PANEL)
Fault contact rating
30V DC 1 AMP
Local fire
contact rating
30V DC 1 AMP
Fire contact rating
30V DC 1 AMP
Sounder output rating
0.5A PER OUTPUT
(MAX. 1.6A OVER ALL OUTPUTS)
Sounder circuit EOL
10K 5%
Detection zone current
1.6 MA
Detection zone
EOL resistor
6K8 5%
Cable capacity
2.5MM 2 PER TERMINAL
Operating temperature
-5°C TO +40°C
Operating humidity
<95% (NON CONDENSING)
M2 cabinet dimensions
385W X 310H X 90D
M3 cabinet dimensions
385W X 520H X 110D
1P Rating
IP30
SIGMA CP FEATURES
• Activfire listed AFP-2516
• Compatible with Hochiki detectors
• Approved to AS7240.2, AS7240.4
• Two monitored sounder outputs
• 2, 4 or 8 detection zones
• 3amp power supply
• System enabled via 003 key switch
• Two wire system selectable
(sounders & detectors on same circuit)
• Powder coated metal cabinet
• Operating temperature -5°C to +40°C
• Optional OWS module available
• Simple single board construction
• Installer friendly
CONVENTIONAL | 45
SIGMA XT PANEL WITH HOCHIKI
EXTINGUISHANT CONTROL PANEL
Control Panel is manufactured by Hochiki Group Company,
Kentec Electronics Ltd. and distributed by Incite fire Pty Ltd.
SIGMA XT FEATURES
•A
pproved to AS7240.2 and AS7240.4 Activfire
listed AFP-2516 – SIGMA
• Complies with AS ISO 14520.1
• 2, 4 or 8 detection zones
• System enabled via 003 key switch
• 3 levels of access
COMPATIBLE EQUIPMENT & EXTRAS
• 1-4 extinguishant areas
•D
ual risk input selectable from any zone
(up to 8 zones)
• Configurable detection delays
• Zero time delay option upon manual release
• Dedicated service isolation switch
•C
ountdown indicator shows time until release,
in seconds
RS485 WARNING SIGN
(FLUSH SURROUND AVAILABLE)
46 | CONVENTIONAL
REMOTE STATUS UNIT
•D
ata bus cabling for Sigma remote status unit
and Sigma warning signs
SIGMA XT OVERVIEW
TECHNICAL
Construction
1.2MM MILD SHEET STEEL
Finish
EPOXY POWDER COATED
Colour – lid & box
BS 00 A 05 GREY – FINE TEXTURE
Colour – controls plate
& labels
RAL 7047 LIGHT GREY – SATIN
Supply voltage
230V AC +10%/-15% (100 WATTS
MAXIMUM)
Mains supply fuse
1.6 AMP (F1.6A L250V)
Power supply DC rating
3 AMPS TOTAL INCL. BATTERY
CHARGE 28V +/- 2V
Maximum battery size
7AH 12V (2 PER PANEL)
Fault contact rating
30V DC 1 AMP
Local fire contact
rating
30V DC 1 AMP
Fire contact rating
30V DC 1 AMP
Sounder output rating
0.5A PER OUTPUT (MAX. 1.6A
OVER ALL OUTPUTS)
•C
onfigurable extinguishant duration up to 5 min
at 5 sec intervals
Operating temperature
-5°C TO +40°C
Sounder circuit EOL
10K 5%
• Compatible with I.S barriers
Detection zone current
1.6 MA
• Resettable extinguishant release switch
Detection zone EOL
resistor
6K8 5%
• Extract fan control
Monitored input EOL
resistor
6K8 5%
• Non-latching zone input option
Extinguishant output
EOL
IN4004 DIODE
Extinguishant release
O/P
21-28VDC. Fused at 1 Amp
Extinguishant release
delay
0-60 SECS
Status unit / Warning
sign connection
RS485
IP Rating
IP30
The Sigma XT extinguishant control panels designed
to the requirements of AS7240.2, AS7240.4 and
AS ISO 14520.1
•E
ach extinguishant module has a comprehensive
set of inputs and outputs and is configurable
via the panels LCD display and simple menus
•T
he data bus cabling of the Sigma warning signs
and Sigma remote status units, simplifies and
minimises cable requirements and maximises
monitoring of these external devices
OTHER FEATURES
•C
onfigurable extinguishant delays up to 60 secs
at 5 sec intervals
• Disable extinguishant sub system
• Activate extract fan output
• Activate alarm delays
RS485
Data bus
24 Vdc
1st stage
sounders
up to 8 detection zones
up to 7 warning signs
up to 7 status units
2nd stage
sounders
Hold button
Soleniod valve
optional:
slave sign
or sounder
Hold button
Released pressure switch
Low pressure switch
CONVENTIONAL | 47
NEW CONVENTIONAL DETECTORS
AND DEVICES FOR SIGMA CP PANELS
“
New Conventional Fire Detection. Hochiki’s Conventional Range offers one of the most
extensive product portfolios available, providing solutions for most conventional fire
applications, with a heritage of innovative design and leading edge technologies.
New conventional range can be utilised across
both fire detection systems AND security systems
satisfying ALL your conventional detection
needs in one simple easy-to-install range,
the benefits include:
• Quick Installation
• Easy-fit Bases
HIGH SPECIFICATION 24V FIRE APPLICATION
High Performance Chamber
Technology enabling the detector
to be equally sensitive to a much
wider range of combustible materials.
• Twin Alarm LEDs
• Anti-Tamper Locking Mechanism
The range features a minimised number of detectors
and bases that still fulfil the requirements of even
the most demanding applications, reducing the
stock holding required and ensuring that the
installer has the correct detector or base available.
VERSATILITY
12V SECURITY APPLICATION
Same High Performance range
of detectors
Ultra wide operating voltage range,
will operate on 12V security systems
Simple Relay Base
High specification combined with the ability to work
on 2-Wire systems and Security Systems make this
Conventional Range the No.1 choice for installers,
system designers and specifiers.
RELIABILITY
Third party approved to Australian Standards
(AS7240) which makes this range suitable
for all high reliability fire detection requirements.
HIGH SPECIFICATION
24V FIRE
APPLICATION
2-WIRE
24V FIRE
APPLICATION
2-WIRE 24V FIRE APPLICATION
Same High Performance range
of detectors
Sounders and Call Points
on the same wiring as detectors
Specialised base uniquely
designed for this type
of application (YBO-R/6PA)
Simple installation
and wiring methods
12V SECURITY
APPLICATION
48 | CONVENTIONAL
CONVENTIONAL DETECTORS AND DEVICES FOR SIGMA CP PANELS
AS7240 HEAT CLASSIFICATION
CLASS
A
B
C
D
DFJ-A3
DFJ-C3
60° Fixed
Temperature
Heat Detector
90° Fixed
Temperature
Heat Detector
DCD-A3
DCD-C3
60° Combined Fixed
90° Combined Fixed
Temperature & Rate
of Rise Heat Detector
Temperature & Rate
of Rise Heat Detector
TYPICAL* APPLICATION TEMPERATURE
25°C40°C55°C70°C
MAXIMUM APPLICATION TEMPERATURE
50°C65°C80°C95°C
*Typical Application Temperature means the ambient temperature of the environment appropriate
for that particular detector type.
YBN-R/6
A Conventional Detector Mounting Base
associated with the CDX Range of Detectors
and Beacons and is fully compatible with
the majority of existing conventional fire
alarm control panels.
• Integral remote indicator output
• Low Profile, only 8mm
• Rugged design and electronics free
• Quick connections via square cable clamps
• Accepts up to 2.5mm2 cables
• Bayonet slot, low insertion force
for detectors.
The standard Conventional base (YBN-R/6) should
be wired as shown below. The remote indicator
output is taken from terminals 1 and 4 (if required).
BASE VARIATIONS
YBO-R/6PA
For use with compatible 2-Wire systems.
YBO-R/6R
A latching Relay version of the standard
base (YBN-R/6).
YBO-R/6RN
A non-latching Relay version of the standard
base (YBN-R/6).
CONVENTIONAL | 49
CONVENTIONAL DETECTORS AND DEVICES FOR SIGMA CP PANELS
SLV-AS3
The SLV-AS3 is a Photoelectric Smoke Detector which
incorporates Hochiki’s unique High Performance Photoelectric
Smoke Chamber removing the need to use Ionisation Detectors
in the majority of applications. An integral third terminal
provides a remote indicator output.
DCD-A3
A Model DCD-A3 is a Rate of Rise Heat Detector with a 60°C
fixed temperature element using a thermistor and linearising
circuit to provide an accurate linear response heat detector.
A third terminal provides integral remote indicator output.
The DCD-A3 is ideal for use where medium ambient
temperatures exist, such as drying rooms or where smoke
detectors are unsuitable because of the presence of steam
or cooking fumes such as in a kitchen.
DCD-C3
A Model DCD-C3 is a Rate of Rise Heat Detector with a 90°C
fixed temperature element using a thermistor and linearising
circuit to provide an accurate linear response heat detector.
A third terminal provides integral remote indicator output.
The DCD-C3 is ideal for use where medium ambient
temperatures exist, such as drying rooms or where smoke
detectors are unsuitable because of the presence of steam
or cooking fumes such as in a kitchen.
DFJ-A3
A Model DFJ-A3 is a 60°C Fixed Temperature Heat Detector
using a thermistor and linearising circuit to provide an accurate
linear response heat detector. A third terminal provides integral
remote indicator output. The DFJ-A3 is ideal for use where
medium ambient temperatures exist, such as drying rooms
or where smoke detectors are unsuitable because of the
presence of steam or cooking fumes such as in a kitchen.
DFJ-C3
A Model DFJ-C3 is a 90°C Fixed Temperature Heat Detector
using a thermistor and linearising circuit to provide an accurate
linear response heat detector. A third terminal provides integral
remote indicator output. The DFJ-C3 is ideal for use where medium
ambient temperatures exist, such as drying rooms or where
smoke detectors are unsuitable because of the presence
of steam or cooking fumes such as in a kitchen.
50 | CONVENTIONAL
•
•
•
•
•
•
Remote indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Low profile design with one piece outer cover
Twin fire LEDs allow 360° viewing
Range of mounting bases
Approved to AS7240.7
•
•
•
•
•
•
Electronic linear heat detection
Remote Indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Twin fire LEDs allow 360° viewing
Range of mounting bases
Approved to AS7240.5
•
•
•
•
•
•
Electronic linear heat detection
Remote Indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Twin fire LEDs allow 360° viewing
Range of mounting bases
Approved to AS7240.5
•
•
•
•
•
•
•
Electronic linear heat detection
Remote Indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Twin fire LEDs allow 360° viewing
Fixed temperature detector
Range of mounting bases
Approved to AS7240.5
• Electronic linear heat detection
• Remote Indicator output
• Wide voltage range (9.5 ~ 30 Vdc)
• Twin fire LEDs allow 360° viewing
• Fixed temperature detector
• Full range of mounting bases
• Approved to AS7240.5
CONVENTIONAL DETECTORS AND DEVICES FOR SIGMA CP PANELS
YBN-R/6
A Model YBN-R/6 is a Conventional Detector Mounting Base
associated with the NEW Sigma CP series range of detectors.
YBO-R/6PA
A Model YBO-R/6PA is a Conventional Detector Mounting
Base for 2 wire Systems where detectors and sounders
are on the same zone cables.
YBO-R/6R
A Conventional Latching Relay Mounting Base.
Model YBOR/6R is a conventional detector mounting base
associated with the NEW conventional range of detectors.
YBO-R/6RN
A Conventional Non-Latching Relay Mounting Base.
Model YBOR/6RN is a conventional detector mounting base
associated with the NEW conventional range of detectors.
• Integral remote indicator output
• Low Profile, only 8mm
• Rugged design and electronics free
• Quick connections via square cable clamps
• Accepts 2.5mm2 cables
• Bayonet slot, low insertion force for detectors
•
•
•
•
Integral remote indicator output
Rugged design
Dedicated cable screen terminal
Quick connection via square cable
clamps accepts up to 2.5mm2 cables
• Bayonet slot, low insertion force for detectors
• Integral remote indicator
•W
ide voltage range – can be used
in security systems
• Rugged design
• Quick connections via square cable clamps
• Accepts 2.5mm2 cables
• Bayonet slot, low insertion force for detectors
• Integral Remote Indicator
• Wide Voltage Range – can be used
in security systems
• Rugged design
• Quick connections via square cable clamps
• Accepts 2.5mm2 cables
• Bayonet slot, low insertion force for detectors
DFG-60BLKJ(AS)
An IP67 Waterproof Conventional 60°C Fixed Temperature
Heat Detector with minimal standby current and high reliability.
Particularly suited to environments, which are exposed to high
levels of condensation or are hosed down.
• Waterproof design – rated to IP67
• Low profile shape
• Utilises a bimetallic strip to sense
temperature change
• No mounting base required
• Minimal standby current
• Approved to AS7240.5
CONVENTIONAL | 51
CONVENTIONAL DETECTORS AND DEVICES FOR SIGMA CP PANELS
DRD-AS
A Conventional Flame Detector designed for internal
use to detect large flames. The detection zone is a 90°
cone and the detection range is up to and including 25m.
CSB-E
A Conventional Base Sounder which has been designed
to complement the Hochiki conventional range of detectors.
Improved electronic design enables very low current
consumption whilst providing a range of tones and
volumes selectable from each unit.
CSBB-E
A Conventional Base Sounder Beacon which has been
designed to complement the Hochiki conventional range
of detectors. Improved electronic design enables very low
current consumption whilst providing a range of tones and
volumes selectable from each unit. Features integral beacon.
CS/CAP
A Protective lockable Cap which can be fitted to the CSB-E
and CSBB-E Conventional base sounders – when either of these
devices isn’t fitted with a sensor.
CWST
A range of Conventional Beacons, which can be used
as wall or ceiling devices. All variants feature high output
LEDs, advanced optics and an innovative lens design,
providing outstanding omni-directional light coverage
at low current draw. Coverage volumes include 194m3
and 92m3 (wall mounted at 2.4m) and between 208m3
and 638m3 (ceiling mounted between 3m and 9m).
The range includes 8 variants, which are determined
by case colour (red or white), LED colour (red or white)
and back box (standard or weatherproof (IP65)).
52 | CONVENTIONAL
•C
lass 1 performance as defined in
BS EN54-10:2002 (range up to 25m)
• Single IR technology
• Robust and slim design
• Low current consumption
• Easy to install
• Fits any of the CDX range of mounting bases
• Twin LEDs for 360° view
• Compatible bases: YBN-R/6, YBO-R/6PA
• Approved to EN54-10
•
•
•
•
•
Robust design
Low current consumption
Easy to install
Maximum 93 dB(A) at 1m (Tone 1)
32 user-selectable tones and
3 user-selectable volumes
• Utilises high intensity LEDs
• Lockable cap available (CS/CAP)
• Robust design
• Low current consumption
• Easy to install
• Maximum 93 dB(A) at 1m (Tone 1)
•32 user-selectable tones and
3 user-selectable volumes
• Utilises high intensity LEDs
• Lockable cap available (CS/CAP)
• Protects Wiring Terminals On Isolator
Bases And Base Sounders
• Easy To Fit
• Approved to AS7240.23,
C & W categories
• Advanced optics ensure superior
light coverage at low current draw
• Synchronised flash exceeds
AS7240.23 standard
• Soft start feature reduces power
surges during system start-up
* Please see page 33 – Choosing VAD
CONVENTIONAL DETECTORS AND DEVICES FOR SIGMA CP PANELS
BANSHEE EXCEL (BE-SSB)
An Electronic Conventional Sounder which
can be installed internally.
BANSHEE EXCEL IP66 (BE-SDB)
An Electronic Conventional Sounder comes with a deeper
IP66 back box, which enables the unit to be installed externally.
BANSHEE EXCEL LITE (BEL-SBSB)
An Electronic Conventional Sounder Beacon
which can be installed internally.
BANSHEE EXCEL LITE IP66 (BEL-SBDB)
An Electronic Conventional Sounder Beacon comes
with a deeper IP66 back box, which enables the unit
to be installed externally.
CLB-E
A Conventional Beacon for use on 24V sounder circuits.
The unit is fitted with a Fresnel lens and high-intensity LEDs,
a design which produces a highly visible flash. The casing
exactly matches the Hochiki conventional detector range
in shape and colour providing seamless integration.
•
•
•
•
Robust design
Low current consumption
Easy to install
Maximum 110 dB(A) at 1m
(dependant on tone selected)
• 32 user-selectable tones
•
•
•
•
•
Robust design
Low current consumption
Easy to install
Deep base provides IP66 protection
Maximum 110 dB(A) at 1m
(dependant on tone selected)
• 32 user-selectable tones
• Robust design
• Low current consumption
• Easy to install
• Xenon beacon technology
•M
aximum 110 dB(A) at 1m
(dependant on tone selected)
• 32 user-selectable tones
• Robust design
• Low current consumption
• Easy to install
• Xenon beacon technology
•D
eep base provides IP66 protection
•M
aximum 110 dB(A) at 1m
(dependant on tone selected)
• 32 user-selectable tones
• High Intensity LED technology
•C
olour-matched to existing detector
and base ranges
•F
its standard conventional base (YBN-R/6)
CONVENTIONAL | 53
CONVENTIONAL DETECTORS AND DEVICES FOR SIGMA CP PANELS
CCP-E
The CCP-E is a conventional call point based upon the industry
standard KAC world series housing and features easy to install,
push fit wiring terminals. The unit can support either Frangible
Glass element or Non Frangible Plastic element.
•S
upports either a ‘Frangible Glass’ element
or a ‘Non Frangible Plastic’ element
• Terminals can accommodate up to a 2.5mm2
solid conductor
• Approved to EN54
• Rugged design
Note – requires SRBACKBOX if surface mounted
(sold separately).
CCP-W
The CCP-W is a IP67 Weatherproof conventional call point
based upon the industry standard KAC world series housing
and features easy to install, push fit wiring terminals. The unit
can support either Frangible Glass element or Non Frangible
Plastic element.
Note – requires SR-BACKBOX if surface mounted
(sold separately).
54 | CONVENTIONAL
•S
upports either a ‘Frangible Glass’ element
or a ‘Non Frangible Plastic’ element
•T
erminals can accommodate up to a 2.5mm2
solid conductor
• Approved to EN54
• Weatherproof IP67
• Rugged design
CONVENTIONAL DETECTORS
“
Conventional Fire Detection. Hochiki’s Conventional Range offers one of the most extensive
product portfolios available, providing solutions for most conventional fire applications,
with a heritage of innovative design and leading edge technologies.
SLV-AS
A Conventional Photoelectric Smoke Detector, which is fully
compatible with the majority of existing conventional systems.
DCD-A
A Conventional Rate of Rise Heat Detector incorporating
a 60°C fixed temperature element. The thermistor and
linearising circuit provide an accurate linear response
heat detector.
DCD-C
A Conventional Rate of Rise Heat Detector incorporating
a 90°C fixed temperature element. The thermistor
and linearising circuit provide an accurate linear response
heat detector.
DFJ-60B
A Conventional 60°C Fixed Temperature Heat Detector
using a thermistor and linearising circuit to provide
an accurate linear response heat detector.
DFJ-90D
A Conventional 90°C Fixed Temperature Heat Detector
using a thermistor and linearising circuit to provide
an accurate linear response.
• High Performance Chamber
• Low profile design with one piece outer cover
• Twin fire LEDs allow 360° viewing
• Remote Indicator output (with YBO-R/4A base)
• Compatible bases: YBO-R/4A and YBN-R/4C
• Approved to AS1603.2
• Electronic linear heat detection
• Twin fire LEDs allow 360° viewing
• Remote Indicator output (with YBO-R/4A base)
• Compatible bases: YBO-R/4A and YBN-R/4C
• Approved to AS1603.1
• Electronic linear heat detection
• Twin fire LEDs allow 360° viewing
• Remote Indicator output (with YBO-R/4A base)
• Compatible bases: YBO-R/4A and YBN-R/4C
• Approved to AS1603.1
•
•
•
•
•
•
Electronic linear heat detection
Twin fire LEDs allow 360° viewing
Fixed temperature detector
Remote indicator output (YBO-R/4A base)
Compatible bases: YBO-R/4A and YBN-R/4C
Approved to AS1603.1
•
•
•
•
•
•
Electronic linear heat detection
Twin fire LEDs allow 360° viewing
Fixed temperature detector
Remote indicator output (YBO-R/4A base)
Compatible bases: YBO-R/4A and YBN-R/4C
Approval: AS1603.1
CONVENTIONAL | 55
CONVENTIONAL DETECTORS
SPC-AS
A Conventional Beam Smoke Detector that consists
of an emitter and receiver that cover a distance
of 5 – 100m providing a maximum coverage of 1500m2.
Features an automatic signal strength adjustment facility
and is also available with a latching or a non-latching relay.
YBO-R/4A
A Conventional Detector Mounting Base with remote
LED function associated with SLV-AS, DCD-A, DCD-C,
DFJ-60B, DFJ-90D.
•
•
•
•
5 – 100m range
Automatic compensation
Automatic signal strength adjustment
Features a Latching or Non-Latching
Fault Relay
• Can be interfaced onto Hochiki Analogue
system via CHQ-DZM or CHQ-SZM
• Approved to AS7240.12
•
•
•
•
•
Remote indicator output
10mm profile
Rugged design and electronics free
Quick connections via square cable clamps
Accepts 2.5mm2 cables
• Bayonet slot, low insertion force for detectors
YBN-R/4C
A Conventional Detector Mounting Base without remote
LED function associated with SLV-AS, DCD-A, DCD-C,
DFJ-60B, DFJ90D.
DFG-60BLKJ (AS)
An IP67 Waterproof Conventional 60°C Fixed Temperature
Heat Detector with minimal standby current and high reliability.
Particularly suited to environments, which are exposed to high
levels of condensation or are hosed down.
DRD-AS
A Conventional Flame Detector designed for internal
use to detect large flames. The detection zone is a 90°
cone and the detection range is up to and including 25m.
56 | CONVENTIONAL
•
•
•
•
•
Low profile, only 8mm
Rugged design and electronics free
Quick connections via square cable clamps
Accepts 2.5mm2 cables
Bayonet slot, low insertion force for detectors
• Waterproof design – rated to IP67
• Low profile shape
• Utilises a bimetallic strip to sense
temperature change
• No mounting base required
• Minimal standby current
• Approved to AS7240.5
• Class 1 performance as defined
in BS EN54-10:2002 (range up to 25m)
• Single IR technology
• Robust and slim design
• Low current consumption
• Easy to install
• Fits any of the CDX range of mounting bases
• Twin LEDs for 360° view
• Compatible bases: YBN-R/6, YBO-R/6PA
• Approved to EN54-10
HOCHIKI CONVENTIONAL DETECTORS
PANEL COMPATIBILITY CHART
(MAXIMUM NUMBER OF DEVICES ALLOWED PER AZF)
DETECTOR
CHUBB
FFE
INERTIA
BROOKS
PANALECT
VIGILANT
THERMAL
DFJ-60B
THERMAL
DCD-C
THERMAL
DFJ-90D
SMOKE
SLR-AS
SLV -AS
SMOKE
SIJ-ASN
AMPAC
PANEL MODEL NUMBER
THERMAL
DCD-A
MANUFACTURER
ZONESENSE
40
40
40
40
40
40
AB1000, AB800, AB2000, AP1542
39
39
39
39
39
31
AP 1671 FIREFINDER
40
40
40
40
40
40
AB3000, AP1417,
40
40
40
40
40
40
XP 95 DEVICE
40
40
40
40
40
40
AB04
33
33
33
33
33
26
AB40
23
23
16
16
N/C
N/C
FFE MCP-002, 10000 LAM, 10000 DCM
40
40
40
40
40
33
8070, SCP-90,FB-208/56
40
40
40
40
40
40
HOCHIKI CHQ-DZM(CHQ-Z)FIELD DEVICE
30
30
30
30
30
30
NFP/PHOENIX CCI CARD
40
40
40
40
40
40
FIRENET CCI CARD
40
40
40
40
40
40
ZJ1000
40
40
40
40
40
39
2400 & 008
40
40
40
40
40
40
MODEL 128
29
29
29
29
29
23
MODEL 199
18
18
18
18
18
14
2010V
40
40
40
40
40
40
MICROFIRE
40
40
40
40
40
40
F4000, F3200
40
40
40
40
40
40
F5000 AZF 301 1K8
40
40
40
40
40
37
F5000 AZF 301 2K7
31
31
31
31
31
25
N/C
N/C
N/C
N/C
N/C
N/C
2600 & 888
40
40
40
40
40
40
CFP800
20
20
25
25
20
22
F08
NOTIFIER
AFP-100, AFP-200, MMX-2, ID-200, AM2020
40
40
40
40
40
40
ZP-E50
40
40
40
40
40
40
ZP5 AS2
40
40
40
40
40
40
ZP5 AS1
34
34
23
23
34
34
FYRTEL MICRO 900
35
35
25
25
35
40
SERIES 86
40
40
40
40
40
40
HONEYWELL
FS90 & 809A
40
40
40
40
40
40
O’DONNELL
GRIFFEN
MICRO 1000
40
40
40
40
40
40
MXL CZM-1
23
23
23
23
23
19
4020
40
40
40
40
40
40
ZITON
MATTHEWS FIRE
DIGITRON
SIMPLEX
2120
28
28
28
28
28
23
4100
33
33
33
33
33
27
CONVENTIONAL | 57
MARINE FIRE DETECTION
“
All marine fire detection products have been approved by either Lloyds Register
or Germanischer Lloyd. They are ideal for marine use, such as on ships and oil rigs.
ALG-ENM
A Marine Approved Analogue Addressable Photoelectric
Smoke Sensor incorporating Hochiki’s unique High
Performance Chamber which allows the sensor threshold
level to be increased, thereby improving the signal to noise
ratio and reducing susceptibility to false alarms.
AC B-EM
A Marine Approved Analogue Addressable Multi-Heat
Sensor incorporating a variable fixed temperature heat
element and a rate of rise heat element, both controlled
from the Control Panel allowing either thermal element
or both elements simultaneously to be active in making
the fire decision.
DRD-EM
A Marine approved conventional Infra-Red Flame
detector designed for internal use to detect large flames.
The detection zone is a 90° cone and the detection range
is up to and including 25 m.
YBN-R/3M
A Marine Approved Common Mounting Base which is fully
compatible with Hochiki’s analogue range of marine approved
sensors. Supplied with square cable clamps for secure
and reliable cable termination and is also capable of driving
a remote LED if required.
58 | MARINE FIRE DETECTION
• Removable, High Performance Chamber
• Twin fire LEDs allow 360° viewing
• Locking mechanism (sensor to base)
• Variable sensitivity
• Electronically addressed
• Pulsing/non-pulsing controlled from panel*
• Approved to MED by GL
* Please ensure Control Panel compatibility
• User selectable modes
• Incorporates fixed temperature and rate
of rise heat elements
• Twin fire LEDs allow 360° viewing
• Pulsing/non-pulsing controlled from panel*
• Electronically addressed
• Approved by LPCB to Classes A, B & C
• Approved to MED by GL
* Please ensure Control Panel compatibility
• Class
1 performance as defined
in BS EN54-10:2002 (range up to 25 m)
• Single IR technology
• Robust and slim design
• Low current consumption
• Twin LEDs for 360 degree viewing
• Approved to MED by GL
• Electronics free
• Supports ESP marine approved sensors
• Stainless steel contacts
• Takes 2.5mm2 cables
• Slim profile – only 8mm
• Rugged wiring contacts
• Facility for remote indicator
•Q
uick connection via square cable clamps
• Approved to MED by GL
MARINE FIRE DETECTION
YBO-R/SCIM
A Marine Approved Loop Isolator Base which is fully compatible
with Hochiki’s Analogue Range of Marine Approved Sensors.
The unit incorporates an amber LED to show when
it is isolating a section of the loop.
CHQ-DIM/M (SCI)
A Marine Approved Analogue Addressable Dual Input
Module designed to interface to a variety of inputs such
as door contacts, sprinkler flow/door switches and plant
equipment. Features an integral Short-Circuit Isolator.
CHQ-DRC/M (SCI)
A Marine Approved Analogue Addressable Dual Relay
Controller designed to provide two general-purpose relay
outputs, each output can be controlled independently
and used to control dampers, plant and equipment shutdown.
The monitored input can be used for local power supply fault
monitoring or as a general-purpose input. Features an integral
Short-Circuit Isolator.
CHQ-DSC/M (SCI)
A Marine Approved Analogue Addressable Dual Sounder
Controller, which has been designed to provide two sounder
outputs (that can be driven separately) with full fault monitoring.
The monitored input can be used for local power supply fault
monitoring or as a general-purpose input. Features an integral
Short-Circuit Isolator.
CHQ-SZM/M (SCI)
A Marine Approved Analogue Addressable Single
Zone Monitor designed to allow up to 6 marine approved
conventional detectors to be interfaced to Hochiki’s Analogue
Addressable system. Features an integral Short-Circuit Isolator.
• Detects short circuits on loop
• Status LED
• Connection of up to 127 per loop
• Supports marine approved sensors
•Q
uick connection via square cable clamps
• Approved to MED by GL
• Loop powered
• Single loop address
•T
wo independent inputs for monitoring
of volt-free contacts
•E
ach input can be configured to monitor
either normally open or normally
closed contacts
• Features an integral Short-Circuit Isolator
• Approved to MED by GL
• Loop powered
• Single loop address
•T
wo independently controlled
changeover relays
• Relays contact rated at 30 Vdc at 1 amp
• Auxiliary monitored input
• Features an integral Short-Circuit Isolator
• Approved to MED by GL
• Single loop address
• Two independent sounder circuits
•E
ach circuit fully monitored for open
and short circuit faults
• Each alarm circuit fused at 1 amp
• Auxiliary monitored Input
•O
utputs are synchronised and can
be driven continuously or intermittently
• 24 Vdc auxiliary power required
• Features an integral Short-Circuit Isolator
• Approved to MED by GL
• Loop powered
• Up to 6 conventional detectors
• Single loop address
• Remote LED output
•F
ully monitored for short
and open circuit faults
• Features an integral Short-Circuit Isolator
• Approved to MED by GL
MARINE FIRE DETECTION | 59
MARINE FIRE DETECTION
HCP-EM
A Marine Approved Analogue Addressable Manual Call Point
fully compatible with Hochiki’s Analogue Addressable protocol
and featuring plug-in wiring terminals for easy installation.
Note – requires SR-BACKBOX if surface mounted (sold separately).
SLR-E3NM
A Marine Approved Conventional Photoelectric Smoke
Detector which is fully compatible with the majority
of existing Marine Conventional systems and incorporates
a remote indicator output.
DCD-AE3M
A Marine Approved Conventional Rate of Rise Heat Detector
incorporating a 60°C fixed temperature element. The thermistor
and linearising circuit provide an accurate linear response
heat detector. A third terminal provides integral remote
indicator output.
DCD-CE3M
A Marine Approved Conventional Rate of Rise Heat Detector
incorporating a 90°C fixed temperature element. The thermistor
and linearising circuit provide an accurate linear response
heat detector. A third terminal provides integral remote
indicator output.
YBN-R/6M
A Marine Approved Conventional Detector Mounting Base
for the CDX marine approved range of detectors and fully
compatible with the majority of existing conventional
fire alarm Control Panels.
• Fast response
• Status LED
• Non-frangible element fitted as standard
(conforms to EN54)
• Addressed with TCH-B100 Hand
• Held Programmer
• Surface or flush mounting
• Weatherproof IP67 version
available (HCP-WM)
• Approved to MED by GL
•
•
•
•
•
•
•
High Performance Chamber
Remote indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Low profile design with one piece outer cover
Twin fire LEDs allow 360° viewing
One master base
Approved by LPCB, LR and GL
•
•
•
•
•
Electronic linear heat detection
Remote indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Twin fire LEDs allow 360° viewing
Approved by LPCB, LR and GL
•
•
•
•
•
Electronic linear heat detection
Remote indicator output
Wide voltage range (9.5 ~ 30 Vdc)
Twin fire LEDs allow 360° viewing
Approved by LPCB, LR and GL
•
•
•
•
•
Integral remote indicator output
Low profile, only 8mm
Rugged design
Electronics free
Quick connections via square
cable clamps
• Accepts 2.5mm2 cables
•B
ayonet slot, low insertion force
for detectors
• Approved by LR and GL
60 | MARINE FIRE DETECTION
MARINE FIRE DETECTION
MBB-1
A Marine Back Box providing a splash proof and secure fixing
for the Hochiki Analogue and conventional marine approved
range of sensors and detectors and their associated bases.
Provides an aesthetically pleasing solution where surface
fixed devices are required. The housing supports four
20mm glanded entries for cabling access.
A105N ALARM SOUNDER
The A105N is a high output, 112dB(A) alarm sounder.
Low current consumptionand high SPL in a robust fire
retardant IP66 housing ensure the A105N issuitable
for all general signalling applications including fire,
security and process control.
•4
glanded cable entry holes
(glands not supplied)
• Colour matched
• Approved sensor and base range
• Provides moisture and dust resistant fixing
• Ideal for bulk-head fixing
• Approved by LR and GL
•N
on-marine use version available (SBB-1)
• Automatic synchronisation
on multi-sounder system.
• Continuously rated.
• Stainless steel fixings.
• Unit can be mounted using external
lugs or internal BESA compatible
fixing positions.
• Duplicate cable terminations
(in & out for daisy-chain installations).
• Tropicalisation available on request.
• Available with custom tone configurations
and frequencies.
• Marine Equipment Directive (MED)
Certificate: 19 702 – 11 HH
A112N ALARM SOUNDER
The A112N is a high output, 119dB(A) alarm sounder.
High SPL in a robust fire retardant IP66 housing ensure
the A112N is suitable for all general signalling applications
including fire, security and process control.
BEXS110/BEXDS110 ALARM SOUNDERS
The flameproof BExS110 alarm sounders are suitable
for Zone 1 & Zone 2 applications and the BExDS110 sounders
also for Zone 21 & 22. Sound level ouputs are up to 117dB(A)
at 1 metre with a choice of 32 alarm tones and 3 remotely
selectable stages. The BEx range features enclosures
manufactured from corrosion proof, marine grade copper
free LM6 aluminium which is phosphated and powder
coated. The re-entrant flare horns are high impact, fire
retardant ABS. All models have two M20 cable entries,
large termination areas containing in & out terminals
(Ex de version only) and an ingress protection of IP66/67
(Ex d) and IP66 (Ex de).
• Automatic synchronisation
on multi-sounder system.
• Continuously rated.
• Stainless steel fixings.
• Unit can be mounted using external
lugs or internal BESA compatible
fixing positions.
• Duplicate cable terminations
(in & out for daisy-chain installations).
• Tropicalisation available on request.
• Available with custom tone
configurations and frequencies.
• Marine Equipment Directive (MED)
Certificate: 19 702 – 11 HH
• Automatic synchronisation
on multi-sounder system.
• Very large termination area.
• Ratchet adjustable stainless steel
‘U’ bracket.
• IN & OUT terminals (Ex de version only).
• Marine Equipment Directive (MED)
Certificate: 19 702 – 11 HH
MARINE FIRE DETECTION | 61
INTRINSICALLY SAFE FIRE DETECTION
“
Hochiki’s Intrinsically Safe Conventional range of products has been designed around
the existing world-proven Hochiki conventional range. The detectors have been approved
for hazardous area use by both LPCB and Germanischer Lloyd.
EOL
CONVENTIONAL CONTROL PANEL
1
Z787 ZENER BARRIER
PANEL
The Zener Barrier is a relatively simple device,
the technique employed to reduce the amount
of energy entering the hazardous area is the limiting
of the voltage and current using resistors and zener
diodes. Zener Barriers require earthing in accordance
with standards (typically <1 ohm to main building
earth point).
2
ZENER BARRIER
(MUST BE EARTHED)
or
GALVANIC ISOLATOR
HAZARDOUS AREA
II
1
G E Ex ia
IIC T5 Tamb=55°C
Ex
BASEEFA Flammable Atmospheres symbol
Maximum normal environment temperature
Maximum Surface Temperature of any component,
“T5” = 100oC
Defines Gas Group within which device can be used
Method of Protection, “ia” = Intrinsically Safe
with two faults
Explosion protected
Meets European Standard
Type of Explosive Atmosphere, “G” = Gas group
Equipment Category, “1” = Very High Protection
Equipment Group, “II” = Non-mining Atmospheres
EU Explosives Atmospheres symbol
62 | INTRINSICALLY SAFE FIRE DETECTION
GALVANIC ISOLATOR ONLY
2
KFDO-C5-EX2.5IP ISOLATED BARRIER
This isolated barrier is used for intrinsic safety
applications. It transfers DC signals from fire alarms,
smoke alarms, and temperature sensors in hazardous
areas. It can also be used to control I/P converters,
power solenoids, LEDs, and audible alarms.
PANEL
1
EOL
ANALOGUE CONTROL PANEL
Hochiki’s Intrinsically Safe detectors have been
certified by BASEEFA under the new ATEX directive
which will become mandatory as of the 1st July 2003.
This directive changes the classification for the risk
areas into categories and also changes the bias
to prevent explosive atmospheres (EN 1127-1).
The certification marking of Hochiki’s DCD-1E-IS
Heat Detector and SLR-E-IS Photolectric Smoke
Detector is shown left with an explanation
of each part.
1
Up to 20 INTRINSICALLY SAFE
Detectors (SLR-E-IS or DCD-1E-IS)
2
Unlimited number
of INTRINSICALLY SAFE
Manual Call Points (CCP-E-IS)
(always first on the zone)
EOL
To ensure that the surface
temperature of the resistor
remains below that of the
flash-point of the hazardous
material present it is certified
that the overall surface area
must be greater than 230mm2.
LOOP
SAFE AREA
ZONE CIRCUIT
HAZARDOUS AREA
ZONE CIRCUIT
AUXILIARY POWER
24Vd.c
INTRINSICALLY SAFE FIRE DETECTION | 63
INTRINSICALLY SAFE FIRE DETECTION
SLR-E-IS
A Conventional I.S. Photoelectric Smoke Detector designed
for use in hazardous areas. Incorporates a remote indicator
output and a removable chamber for easy maintenance.
DCD-1E-IS
A Conventional I.S. Rate of Rise Heat Detector designed
for use in hazardous areas. Incorporates a remote indicator
output and a 60°C fixed temperature element.
YBN-R/4 (IS)
A Conventional Detector Mounting Base associated
with the Hochiki conventional range of Intrinsically
Safe Detectors and is fully compatible with the majority
of existing conventional fire alarm Control Panels.
IFD-E(IS)
Infra Red Intrinsically Safe Flame Detector Alloy Housing
is an Intrinsically Safe IR³ flame detector designed
for use where open flaming fires may be expected
and responds to the light emitted from flames during
combustion. The detector discriminates between flames
and other light sources by responding only to particular
optical wavelengths and flame flicker frequencies.
This enables the detector to avoid false alarms due to such
factors as flickering sunlight. Ideal for the detection of flames
from the burning of Aviation Fuels (kerosene), Butane, Grain
& Feeds, Hydrogen, Paper, Natural Gas, Petrol (gasoline) etc.
IFD-E(EXD)
Infra Red Flame Detector Alloy Flameproof Housing
is an Explosion-Proof IR³ flame detector designed
for use where open flaming fires may be expected
and responds to the light emitted from flames during
combustion. The detector discriminates between flames
and other light sources by responding only to particular
optical wavelengths and flame flicker frequencies.
This enables the detector to avoid false alarms due to such
factors as flickering sunlight. Ideal for the detection of flames
from the burning of Aviation Fuels (kerosene), Butane, Grain
& Feeds, Hydrogen, Paper, Natural Gas, Petrol (gasoline) etc.
64 | INTRINSICALLY SAFE FIRE DETECTION
• High Performance Chamber
• Twin fire LEDs allow 360° viewing
• Supported by a range of barriers
• Remote indicator output
• IECEx certification to: II 1G EEx ia IIC T5
(Tamb=55°C)
•S
uitable for installation in areas at category 1
(inc. all lower categories)
• Approved by BASEEFA
•
•
•
•
Twin fire LEDs allow 360° viewing
Electronics free mounting base
Remote indicator output
IECEx certification to: II 1G EEx ia IIC
T5 (Tamb=55°C)
•S
uitable for installation in areas at category 1
(inc. all lower categories)
• Approved by BASEEFA
•
•
•
•
Low profile, only 8mm
Rugged design
Dedicated cable screen terminal
Accepts from 1 to 2.5mm2 cables
•Q
uick connection via square cable clamps
• Electronics free
• Unaffected by convection currents, draughts
or wind and solar-blind
• Tolerant of fumes, vapours, dust and mist
• ATEX certification to: EEx ia IIC T4 (135 C)
(zones 0, 1 and 2)
• Responsive to a flame more than 25 m away
• Selectable response speed
• Class 1 performance as defined in BS EN54
10:2002 (on the high sensitivity setting)
• Optical self-test
• SIL capable
•S
upports either a ‘Frangible Glass’ element
or a ‘Non-Frangible Plastic’ element
• Terminals can accommodate up to a 2.5mm2
solid conductor
• Approved to EN54 part 12
• Rugged design
• ATEX classification to II 1G EEx ia IIC T4
INTRINSICALLY SAFE FIRE DETECTION
CCP-E-IS
A Conventional Manual Call Point designed
for use in hazardous areas and based upon
the industry standard KAC world series housing.
CCP-W-IS
A Conventional Manual Call Point designed
for use in hazardous areas and based upon
the industry standard KAC world series housing.
CHQ-DZM (SCI)-IS
A Dual Zone Module which is fully compatible with
Hochiki’s ESP Analogue Addressable protocol and I.S.
equipment. The module will allow connection of up
to 40 Hochiki I.S. conventional detectors (20 per zone)
through a Galvanic Isolator, which are then fully monitored
for open and short circuit. Also available as a DIN Rail
mountable version. Both models feature an integral
Short-Circuit Isolator.
CHQ-ISM
This Sounder Control Module interfaces between the Hochiki
Analogue system via a CHQ-DSC or conventional sounder
O/P’s and the intrinsically safe sounder/beacon units
via an intrinsically safe barrier. The module provides
line monitoring for open or short circuits on the wiring
connected to both the safe and hazardous areas.
Z728 ZENER BARRIER
Zener barriers provide cost saving Ex-protection for various
applications in process automation systems. The amount
of energy transferred to the hazardous location is limited
to a safe level incapable of igniting the explosive atmosphere.
•S
upports either a ‘Frangible Glass’ element
or a ‘Non-Frangible Plastic’ element
• Terminals can accommodate up to a 2.5mm2
solid conductor
• Approved to EN54 part 12
• Rugged design
• ATEX classification to II 1G EEx ia IIC T4
•S
upports either a ‘Frangible Glass’ element
or a ‘Non Frangible Plastic’ element
• Terminals can accommodate up to a 2.5mm2
solid conductor
• Approved to EN54 part 12
• Rugged design
•A
TEX classification to II 1G EEx ia IIC T4
• Single loop address
•S
upports two independent zones
of Hochiki I.S. conventional detectors
•B
oth zones fully monitored for
short/open-circuit
• Requires an auxiliary 24 Vdc supply
• DIN Rail version available
•B
oth models feature an integral
Short-Circuit Isolator
• Provides dual sounder circuits
• Provides fault-monitored input
• Interfaces between loop and I.S.
sounders/beacons
• Fully monitored for short-circuits
• Requires 24 Vdc external power supply
• Also available as a DIN module
•
•
•
•
•
•
1-channel
DC version, positive polarity
Working voltage 26.5 V at 10 µA
Series resistance max. 327 Ω
Fuse rating 50 mA
DIN rail mounting
INTRINSICALLY SAFE FIRE DETECTION | 65
INTRINSICALLY SAFE FIRE DETECTION
Z787 ZENER BARRIER
Zener barriers provide cost saving Ex-protection for various
applications in process automation systems. The amount
of energy transferred to the hazardous location is limited
to a safe level incapable of igniting the explosive atmosphere.
KFDO-CS-EX2.51P ISOLATED BARRIER
This Isolated Barrier is used for intrinsic safety applications.
It transfers DC signals from fire alarms, smoke alarms,
and temperature sensors in hazardous areas. It can also
be used to control I/P converters, power solenoids, LEDs,
and audible alarms. Reverse polarity protection prevents
damage to the isolator caused by faulty wiring. Since this
isolator is loop powered, use the technical data to verify
that proper voltage is available to the field devices.
IS-A105N ALARM SOUNDER
The IS-A105N is a high output, 105dB(A) alarm sounder.
Approvals include ATEX, IECEx and GOST-R for Zone 0
applications and FM approval for Class I Division 1 and Class I
Zone 0 applications.
The IS-A105N is suitable for all intrinsically safe signalling
applications including fire, security and process control.
IS-L101L INTRINSICALLY SAFE L.E.D BEACON
The IS-L101L unit is an intrinsically safe field mounting beacon
which provides a bright flashing warning signal. The unit can
be used independently or combined with an IS-A105N 49 alarm
sounder. Combination units can utilise a common zener barrier
or galvanic isolator and may be coupled together or mounted
separately. With the IS-A105N the alarm accept function
can be utilised. By closing a pair of external contacts (i.e push
switch) the operator may silence the alarm for set periods
between 5 seconds and 2 hours. If after the pre-set time
the alarm condition still exists the sounder will activate again.
IS-mA1 IS-MINIALARM
The IS-mA1 is a compact, 100dB(A) alarm sounder.
Approvals include ATEX, IECEx and GOST-R for Zone 0
applications and FM approval for Class I Division 1 and Class I
Zone 0 applications. The IS-mA1 is suitable for all intrinsically
safe signalling applications including fire, security and process
control. The IS-mA1M version is also available for Group I
mining environments.
66 | INTRINSICALLY SAFE FIRE DETECTION
•
•
•
•
•
•
•
2-channel
DC version, positive polarity
Working voltage 26.5 V at 10 µA
Series resistance max. 327 Ω
Fuse rating 50 mA
DIN rail mounting
With diode return
•
•
•
•
•
•
•
2-channel isolated barrier
24 Vdc supply (Loop powered)
Current input/output 0 mA ~ 40 mA
I/P or transmitter power supply
Accuracy 1%
Reverse polarity protection
Up to SIL2 acc. to IEC 61508
• Input overload and reverse current protection
• Auto synchronised sound output
• Unit can be mounted using external lugs
or internal BESA compatible fixing positions.
• Duplicate cable terminations
(in & out for daisy-chain installations)
• Available with custom tone configurations
and frequencies
• Input overload and reverse current protection
• Prismatic lens optimises L.E.D effectiveness
• Approved to ATEX, IECEx
•
•
•
•
Input overload and reverse current protection
End of line resistor certified
Auto synchronised sound output
Available with custom tone configurations
and frequencies.
INTRINSICALLY SAFE FIRE DETECTION
IS-mB1 IS-MINIALITE
The IS-mB1 is a compact beacon with an array of six high
output L.E.D’s. Approvals include ATEX, IECEx and GOST-R
for Zone 0 applications and FM approval for Class I Division 1
and Class I Zone 0 applications. The IS-mB1 is suitable
for all intrinsically safe signalling applications including fire,
security and process control.
IS-mC1 IS-MINIALERT
The IS-mC1 is a compact combined 100dB(A) alarm sounder
and L.E.D. beacon – only one Zener barrier or galvanic isolator
required to run both sounder & beacon or alternatively the unit
can be operated as individual signals. Approvals include ATEX,
IECEx and GOST-R for Zone 0 applications and FM approval
for Class I Division 1 and Class I Zone 0 applications.
• Input overload and reverse current protection
• End of line resistor certified
• Prismatic lens optimises L.E.D effectiveness
•
•
•
•
•
Input overload and reverse current protection
End of line resistor certified
Auto synchronised sound output
Prismatic lens optimises L.E.D effectiveness
Available with custom tone configurations
and frequencies
INTRINSICALLY SAFE FIRE DETECTION | 67
ANCILLARY EQUIPMENT
DH-98-ASA AND DH-98-ASC
A Duct Probe Housing associated with analogue ALK-AS,
ALK-ASN detectors and conventional SLV-AS, SLV-AS3
detector to be mounted on the outside of an air duct
for the purpose of monitoring the air within the duct.
(Shown with sensor fitted – not supplied).
TC H-B100
A Hand Held Address Programmer designed to address
the range of Sensors and other addressable devices such
as the YBO-BS Base Sounder. Designed to be light, robust
and easy to use it operates from a single PP3 size 9v battery
which can provide up to 8000 operations.
(Shown with sensor fitted – not supplied).
16091
A Hand Held Flame Detector Tester providing a flame-free
method of testing flame detectors
SMB-1
An IP66 rated, grey (RAL7035) enclosure designed
for use with the Hochiki range of modules. Supplied with
a transparent black lid as standard. Used in conjunction with
the SMBADAPTOR this enclosure can house any of the PCB
assemblies from the Hochiki Smart-Fix module range.
SMB-2
An IP66 rated, grey (RAL7035) enclosure designed for use with
the Hochiki range of DIN modules. Supplied with a transparent
black lid as standard. The unit is supplied with a DIN Rail
section (plus fixings) and will accept up to six Hochiki DIN Rail
modules, side-by-side.
68 | ANCILLARY EQUIPMENT
• Install quickly and easily
• No screens or filters to clean
• Rugged gray steel back box with clear cover
• Lightweight design
• Quick and reliable addressing
•O
ver 8000 address settings
from one battery
• Displays sensor analogue value
•S
imple to use hand held unit with
rechargeable NiCd battery pack and charger
• Tests many Flame Sensors Types UV, UV/IR,
UV/IR3, IR3, IR2, IR
• Range typically 3 and beyond
•S
electable optical output intensity
with LED bar graph indication
• Quick-release screws
• Polyurethane gasket provides IP66 protection
• Corrosion free, resistant to most alkaline
and acid
• Temperature resistance to +70°C,
impact resistant, and non-flammable
• 32 knock-outs
• Designed to house up to 6 Hochiki DIN modules
• Quick-release screws
• Polyurethane gasket provides IP66 protection
• Corrosion free, resistant to most alkaline
and acid
• Temperature resistance to +70°C,
impact resistant, and non-flammable
• 32 knock-outs
• Supplied with DIN Rail and fixings
ANCILLARY EQUIPMENT
SMB-3
An IP66 rated, grey (RAL7035) enclosure designed
for use with the Hochiki range of DIN modules.
Supplied with a transparent black lid as standard.
The unit is supplied with a DIN Rail section (plus fixings)
and will accept up to four Hochiki DIN Rail modules,
side-by-side.
SMB ADAPTOR PLATE
The SMB-ADAPTOR is a mounting plate designed to be fitted
within the SMB-1 module enclosure to facilitate the mounting
of the CHQ range of modules and ‘mini’ modules. The CHQ
range of modules is fitted utilising the CHQ-ADAPTOR,
an adaptor which allows the PCB assembly of the CHQ Module
to be removed and mounted within enclosures. The ‘mini’
modules such as the CHQ-POM can be fitted directly
to the SMB-ADAPTOR plate
CHQ-BAC KBOX
The CHQ-BACKBOX is designed for installations where
the CHQ range of modules – CHQ-DIM(SCI), CHQ-SZM(SCI),
CHQ-DZM(SCI), CHQ-DSC(SCI), CHQ-MRC(SCI),
CHQ-DRC(SCI) and CHQ-PCM – require mounting
within a glanded enclosure.
CHQ-ADAPTOR
The CHQ-ADAPTOR is designed to allow the “Smart-Fix”
range of CHQ Modules to be housed in existing enclosures
originally designed for the first generation CHQ-OEM
Modules by modifying the ‘footprint’ of the unit.
CHQ-BOX LID(WHT)
An alternative lid for the CHQ Range of modules, manufactured
in solid white ABS this lid can replace the semi-transparent
black lid which is supplied as standard with the module.
• Designed to house up to 4 Hochiki DIN modules
• Quick-release screws
• Polyurethane gasket provides IP66 protection
• Corrosion free, resistant to most alkaline and acid
• Temperature resistance to +70°C,
impact resistant, and non-flammable
• 20 metric knock-outs
• Supplied with DIN Rail and fixings
• Provides multiple fixing options
for the CHQ module range
• Easy to install within the SMB-1 enclosure
• Pre-drilled with correct fixing holes
• Provides glanded cable connections
• Robust design
• Compatible with all CHQ Modules
•A
llows the PCB component of a CHQ Module
to be housed in an enclosure
•F
ootprint matches older enclosure sizes
• Rugged design
• Provides alternative lid option
to the complete range of CHQ Modules
ANCILLARY EQUIPMENT | 69
ANCILLARY EQUIPMENT
SBB-1
A Back Box providing a splash proof and secure fixing
for the Hochiki Analogue and conventional range
of sensors and detectors and their associated bases.
Provides an aesthetically pleasing solution where surface
fixed devices are required. The housing supports four
20mm glanded entries for cabling access.
SI-CAP
A Protective Cap which can be fitted to the YBO-R/SCI isolator
base range, the YBO-BS base sounder or the YBO-BSB base
sounder beacon – when either of these devices isn’t fitted
with a sensor.
YBD-RA BASE MOUNTING ADAPTOR
The YBD-RA Surface Wiring Adaptor allows the majority
of Hochiki Sensors/Detectors and their Mounting Bases
to be fitted flush against a fixing surface whilst also allowing
surface wiring (without conduit) to be connected. The adaptor
features four 9mm x 8mm knock-outs for cables/wires allowing
surface-fixed wiring to be connected to an appropriate
mounting base (depending on application). The adaptor
is moulded in ivory white ABS as standard, which allows
seamless integration with the majority of mounting bases
and associated sensors and detectors.
IFD-MB ADJUSTABLE MOUNTING BRACKET
A steel wall mounting bracket specifically designed
for the IFD Range of IR³ detectors. Adjustable through
horizontal and vertical planes.
70 | ANCILLARY EQUIPMENT
•4
glanded cable entry holes
(glands not supplied)
• Colour matched
• Approved sensor and base range
•P
rovides moisture and dust resistant fitting
• Ideal for bulk head fitting
• Marine use (MBB-1)
•P
rotects wiring terminals on isolator
bases and base sounders
• Easy to fit
• Compatible with the majority of existing
Analogue and Conventional bases
• Colour matches standard Hochiki Analogue
and Conventional sensor/detector
/base ranges
• 4 pre-moulded knock-outs provide
wiring entry
• Low profile – only 16mm
• Robust design
• Fits all IFD detectors for wall mounting
• Allows horizontal and vertical adjustment
PRODUCT INDEX
PRODUCT CODE
16091
A105N
A112N
ACA-ASN
ACA-E
ACB-AS
ACB-ASN
ACB-ASNW
ACB-ASW
ACB-EM
AIA-E
AIE-AS
ALB-E
ALG-AS
ALG-ENM
ALK-AS
ALK-ASN
AMU-B2M
AMU-MBM
ATA-E
ATG-AS
BANSHEE EXCEL (BE-SSB)
BANSHEE EXCEL IP66 (BE-SDB)
BANSHEE EXCEL LITE (BEL-SBSB)
BANSHEE EXCEL LITE IP66 (BEL-SBDB)
BEXS110/BEXDS110
CCP-E CCP-E-IS
CCP-W
CCP-W-IS
CHQ-AB
CHQ-ADAPTER
CHQ-ARI
CHQ-BACKBOX
CHQ-BOX LID(WHT) CHQ-CB
CHQ-DIM/M (SCI)
CHQ-DIM2 (SCI)
CHQ-DRC/M (SCI)
CHQ-DRC2 (SCI)
CHQ-DSC (SCI)
CHQ-DSC/M (SCI)
CHQ-DZM (SCI) - IS
CHQ-DZM2 (SCI)
CHQ-ISM
CHQ-MRC2 (SCI)
CHQ-PCM (SCI)
CHQ-POM
CHQ-SIM
CHQ-SOM
CHQ-SZM/M (SCI)
CHQ-SZM2 (SCI)
CHQ-WB
CHQ-WS2
CHQ-WSB2
CLB-E
CS/CAP
CSBB-E
CSB-E
CWST
DCA-B-60R
DCA-B-90R
DCC-A
DCC-C
DCD-1E-IS
DCD-A
DCD-A3
DCD-AE3M
DCD-C
DCD-C3
DCD-CE3M
DFB-60B
DFB-90D
DFE-60B
DFE-90D
DFG-60BLKJ(AS)
DFJ-60B
DFJ-90D
DFJ-A3
DFJ-C3
DH-98-ASA/ASC
PAGE NO
68
61
61
22
32
32
22
22
32
58
6
6
6
6
58
32
22
7
7
6
6
53
53
53
53
61
54
65
54
65
24
69
24
69
69
25,33
59
26
59
26
27
59
65
26
65
26
26
25
25
25
59
27
25,34
23
23,34
53
52
52
52
52
7
7
7
7
64
55
50
60
55
50
60
7
7
7
7
51,56
55
55
50
50
68
PRODUCT CODE
DRD-AS
DRD-EM
HCP-E (SCI)
HCP-EM
HCP-W (SCI)
HINGED COVER(PS200)
IFD-E(EXD)
IFD-E(IS)
IFD-MB IS-A105N
IS-L101L
IS-mA1
IS-mB1
IS-mC1
KFDO-CS-EX2.51P
MBB-1
RHD-E-AS
RMD-E-AS
ROD-E-AS
RSM-BS-AS
RSM-BSB-AS
RSM-BSC
RSM-CIM-AS
RSM-CP-AS
RSM-EXP-AS
RSM-IP-AS
RSM-OP-AS
RSM-POM-AS
RSM-WS/W-AS(RED)
RSM-WS-AS(RED)
RSM-WSB/W-AS(RED)
RSM-WSB-AS(RED)
RSM-WTM-AS
SBB-1
SI-CAP
SIF-A
SIGMA CP PANEL
SIGMA XT PANEL
SIH-AM
SIJ-ASN
SLG-A
SLK-A
SLR-AS
SLR-E3NM
SLR-E-IS
SLV-AS
SLV-AS3
SMB ADAPTER PLATE
SMB-1
SMB-2
SMB-3
SPC-AS
SYNCRO AS PANEL
TAKTIS PANEL
TAKTIS VISION
TAKTIS VR
TCH-B100
WS2-WPK
YBC-RL/4H5
YBD-RA YBF-RL/2NBF
YBF-RL/3JM
YBF-RL/4AH4M YBN-R/2NA
YBN-R/3
YBN-R/3(SCI)
YBN-R/3M
YBN-R/4 (IS)
YBN-R/4C
YBN-R/6
YBN-R/6M
YBO-BS
YBO-BSB2
YBO-R/4A
YBO-R/6PA
YBO-R/6R
YBO-R/6RN
YBO-R/SCI(RED)
YBO-R/SCIM
Z728
Z787
PAGE NO
52,56
58
27
60
27
27
64
64
70
66
66
66
67
67
66
61
30
30
30
31
31
31
29
29
28
29
29
29
30
30
31
31
28
70
70
7
44
46
7
7
7
7
7
60
64
55
50
69
68
68
69
56
12
16
18
20
68
24
7
70
6
7
7
32
23
23
58
64
56
51
60
24
24,34
56
51
51
51
23
59
65
66
PRODUCT INDEX | 71
ANALOGUE
CONVENTIONAL
Hochiki’s Analogue range incorporates
a variety of high performance sensors,
modules and ancillary devices to increase
the ease of routine maintenance and
commissioning. Enhanced System
Protocol (ESP) applies Hochiki’s
high integrity communication link
to all products in the range.
Hochiki’s Conventional range covers
one of the most extensive product
portfolios, and provides solutions
for most conventional fire detection
applications, as well as security
systems due to its wide voltage
range (9.5 ~ 30 Vdc).
INTRINSICALLY SAFE & MARINE
WIRELESS
For demanding environments,
Hochiki has a range of industrial,
intrinsically safe and explosion
proof conventional products,
as well as amarine product range
that encompasses options to match
both Analogue and Conventional
products ranges.
Hochiki also caters for hybrid
sites with the firewave range which
integrates wireless technology into
Hochiki’s Analogue hardwired system
to provide maximum flexibility
and meet specific site requirements.
HOCHIKI AUSTRALIA PTY LTD
Address: Block Y, Unit 1 Regents
Park Estate, 391 Park Road,
Regents Park NSW 2143
P +61 2 9738 5566
F +61 2 9743 7133
www.hochikiaustralia.com
Esales@hochikiaustralia.com
DISTRIBUTED BY
For NSW, ACT
Incite fire Pty Ltd
Block Y, Unit 1 Regents Park Estate,
391 Park Road, Regents Park NSW 2143
P1300 INCITE (1300 462 483)
+61 2 9644 7144
F+61 2 9644 7255
Esales@incitefire.com.au
ISS2/OCT2015
For VIC, TAS, SA, WA
Incite fire Pty Ltd
Unit 120 – 45 Gilby Road,
Mt Waverley VIC 3149
P+61 3 9544 2211
For QLD, NT SPINE
eFIRE Technologies Pty Ltd
25 Jeays Street,
Bowen Hills QLD 4006
P+61 7 3252 5366
F+61 3 9544 2212
Esalesvic@incitefire.com.au
F+61 7 3252 4099
Esales@efiretechnologies.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising