Addendum - Support

S U P E R S C R I P T 4 4 0 0

S E R I E S

USER’S GUIDE

Contents

Index

February, 1999

703-A0323-001

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is the valuable property of

NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others.

The NEC Technologies product(s) discussed in this document are warranted in accordance with the terms of the Limited

Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data and operator control. Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC Technologies.

To allow for design and specification improvements, the information in this document is subject to change at any time without notice. Reproduction of this document or portions thereof without prior approval of NEC Technologies is prohibited.

© NEC Technologies, Inc., 1999.

Microsoft Windows

®

, Windows 95

®

, Windows 98

®

,

Windows NT

®

, Windows for Workgroups

®

, and MS-DOS

® are registered trademarks of Microsoft Corporation.

Adobe PostScript

Incorporated.

®

3 is a trademark of Adobe Systems

All other product, service, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective companies or organizations. NEC disclaims any responsibility for specifying which marks are owned by which companies or organizations.

Copyright 1999

NEC Technologies, Inc.

1250 N. Arlington Heights Rd.

Itasca, IL 60143

All Rights Reserved.

Copyright 1999

NEC Corporation

7-1 Shiba 5-Chome, Minato-Ku

Tokyo 108-01, Japan

All Rights Reserved.

ii SuperScript 4400 User’s Guide — Addendum

A

BOUT

P

URPOSE

THIS

A

DDENDUM

This addendum revises information in the September, 1998, edition of the NEC SuperScript 4400 Series User’s Guide.

H

OW TO

U

SE

T

HIS

A

DDENDUM

The table shown below cross-references the revisions in this addendum with pages in the User’s Guide. Use it for quickly identifying which pages of the User’s Guide are effected, and where the revisions can be found in this addendum.

The left column identifies which page in the User’s Guide is effected. The center column identifies which page in this addendum the revision can be found. The right column identifies the name of the revised subject.

User’s Guide to Addendum Cross-Reference

User’s Guide

Entire Book

Page 13

Page 19

Page 27

Page 35

Page 36

Page 41

Page 57

Page 60

Page 61

Page 63

Page 77

Page 80

Page 81

Page 101

Add to Chapter 9

Appendixes A and B

Addendum

Page 5

Page 5

Page 5

Page 6

Page 6

Page 7

Page 7

Page 7

Page 8

Page 1

Page 7

Page 1

Page 1

Page 3

Page 4

Page 4

Page 5

Subject

Support for Windows 3.1x

Checking Printer Contents

Loading the Paper Tray

Installing the Network Interface Card (NIC)

Color Control Options

Installing Printing Software (for Windows 95/98)

The Windows NT Shared Printer Driver

Resetting the NIC

Remote Printing: Client System Requirements

PrintAgent Program Menus: Start

Pull Printing

MAP Installation

Windows Peer-to-Peer Printing Setup

Removing Peer-to-Peer Software

Replacing the Ozone Filter

Parallel Printing Problems

Recommended Media iii

iv SuperScript 4400 User’s Guide — Addendum

C

ONTENTS

Click on a subject to go to its page.

About this Addendum . . . . . . . . . . . . . . . . . . . . . . . .iii

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

How to Use This Addendum . . . . . . . . . . . . . . . . . . iii

R

EVISIONS TO THE

U

SER

S

G

UIDE

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Support for Windows 3.1x . . . . . . . . . . . . . . . . . . . . . 1

Checking Printer Contents . . . . . . . . . . . . . . . . . . . . . 1

Loading the Paper Tray . . . . . . . . . . . . . . . . . . . . . . . 1

Installing the Network Interface Card (NIC) . . . . . . . 1

Preparing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the NIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Testing the NIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Color Control Options . . . . . . . . . . . . . . . . . . . . . . . . . 3

Windows 95/98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Printer Driver . . . . . . . . . . . . . . . . . . . . 4

The Windows NT Shared Printer Driver . . . . . . . . . 4

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Sharing the

Windows NT PostScript Printer Driver . . . . . . . . . . . . 4

Installing the

Shared Driver into Windows 95/98 Clients . . . . . . . 5

Resetting the NIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Remote Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Client System Requirements . . . . . . . . . . . . . . . . . . . . 5

PrintAgent Program Menus . . . . . . . . . . . . . . . . . . . . 5

Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Pull Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Server System Requirements . . . . . . . . . . . . . . . . . . . 5

Using MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Windows Peer-to-Peer Printing Setup . . . . . . . . . . . 6

Install Peer-to-Peer Utility . . . . . . . . . . . . . . . . . . . . . 6

Add the Peer-to-Peer Printer Driver . . . . . . . . . . . . . 6

Removing Peer-to-Peer Software . . . . . . . . . . . . . . . 7

Removing P2P-IPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Replacing the Ozone Filter . . . . . . . . . . . . . . . . . . . . 7

Parallel Printing Problems . . . . . . . . . . . . . . . . . . . . . 7

Nothing Printed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Nonsense is Printed . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Error Messages with Little or Nothing Printed . . . . 7

Solutions for Windows 95 or Higher Computers . . . . 7

Solutions for UNIX Computers . . . . . . . . . . . . . . . . . . . 8

Recommended Media . . . . . . . . . . . . . . . . . . . . . . . . 8

Premium Color Laser Paper 24 lb. Bond . . . . . . . . . 8

Premium Color Laser Paper 60 lb. Cover . . . . . . . . . 8

Ultra Glossy Color Laser Paper . . . . . . . . . . . . . . . . . 8

Premium Transparency Film . . . . . . . . . . . . . . . . . . . 8

NEC Premium Paper Sampler . . . . . . . . . . . . . . . . . . 8

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

v

vi SuperScript 4400 User’s Guide — Addendum

Revisions to the

S

UPER

S

CRIPT

4400 U

SER

S

G

UIDE

O

VERVIEW

Listed below are subjects that revises information in the

NEC SuperScript 4400 Series User’s Guide, and are listed in the order in which they are presented in the User’s Guide.

Each section in this addendum states which User’s Guide section is effected by the changes.

• Support for Windows 3.1x

• Checking Printer Contents

• Loading the Paper Tray

• Installing the Network Interface Card (NIC)

• Color Control Options

• Installing Printing Software (for Windows 95/98)

• Resetting the NIC

• Remote Printing: Client System Requirements

• PrintAgent Program Menus: Start

• Pull Printing

• MAP Installation

• Windows Peer-to-Peer Printing Setup

• Removing Peer-to-Peer Software

• Replacing the Ozone Filter

• Parallel Printing Problems

• Recommended Media

S

UPPORT FOR

W

INDOWS

3.1

X

Affects the entire User’s Guide.

The NEC SuperScript 4400 Series printer can receive print jobs from computers running the Microsoft Windows 3.1x operating system (The User’s Guide inaccurately states version 3.x).

C

HECKING

P

RINTER

C

ONTENTS

Revises page 13 of the User’s Guide.

note:

The black and color toner modules in the Starter

Kit print approximately 5,000 and 3,000 pages respectively. Replacement modules print approximately

10,000 and 6,000 letter size pages respectively, at 5% coverage.

L

OADING THE

P

APER

T

RAY

Revises page 19 of the User’s Guide.

note:

If the paper type has been changed from plain to thick stock, or from thick stock to plain, use the Media button on the Operator Panel to switch between these paper types.

The printer does not have to be reconfigured for overhead transparencies; it will automatically recognize when this type of media is loaded.

I

NSTALLING THE

N

ETWORK

I

NTERFACE

C

ARD

(NIC)

Revises page 27 of the User’s Guide.

Kit Part No. 4010

Unlike the Superscript 4400N, the Superscript 4400 does not come with a network interface card (NIC). However, a NIC upgrade kit is available. This section describes how to install the NIC into the Superscript 4400.

SuperScript 4400 Network Interface Card

1

Preparing the Printer

1.

Turn off the printer. Disconnect the power cord and parallel printer cable from the interface panel

(A)

.

2.

Position the printer so that the interface panel can be accessed.

3.

Use a small phillips head screw driver to unfasten two screws from the Interface Panel

Controller Board.

(B)

, then pull out the

4.

Unfasten the screw that holds the small 1.5” x 3.75” plate over the Network Slot, then remove the plate. Keep the screw

(C).

5.

Two posts are used for fastening the NIC to the

Controller Board. Remove the screw from lower one, loosen the screw of the upper one and rotate the small bracket

(D)

. Avoid touching the Controller Board circuitry and components!

Installing the NIC

6.

Remove the NIC from its protective bag

(E)

NIC only by its edges.

. Handle the

7.

Position the NIC as shown in

(F)

, then plug the NIC’s connector to the Controller Board.

8.

Use the mounting screw (removed in step 5) and bracket to fasten the NIC to the standoff post as shown in

Fasten the screw removed from the front in Step 4.

(G)

.

9.

Slide the Controller Board back into the printer.

10. Fasten the Interface Panel to the printer with screws removed in Step 3

(H).

Preparing the Printer

A B C D

2 SuperScript 4400 User’s Guide — Addendum

Testing the NIC

Follow these steps to verify that the NIC is installed and operating properly.

1.

Use a Category 5 network cable to interconnect the printer with your network.

note:

The NIC automatically detects whether it is connected to a 10 Mbps or 100 Mbps Ethernet network.

Shielded network cabling must be used when connecting to 100 Mbps networks.

2.

Use the power cord to interconnect the printer with a power source.

3.

Turn on the printer. After the printer warms up, it will print a Network Settings page with NIC status information (shown on page 72 of the

SuperScript 4400

User’s Guide

). Keep the Network Settings page. You will need this information when configuring the NIC for your network.

note:

The printer takes 3 minutes to warm up from a cold start. It will take less time if it is already warm.

Your 4400 Printer is now a network printer. See Chapter 7,

“Network Setup,” of the user’s guide for configuring your system to use the network printer

C

OLOR

C

ONTROL

O

PTIONS

Revises page 35 of the User’s Guide.

During the PostScript 3 for Windows 95/98 driver installation, you have the option of installing a driver using

Microsoft Image Color Matching (ICM) technology or a driver using NEC’s color matching method. The driver using

NEC’s color matching method is the default driver.

The ICM based driver calibrates the colors with those actually seen on the print client’s monitor. The NEC based driver calibrates the colors with those described by the NEC

Color Table located inside the printer.

The choice can be made when the Select Components dialog box appears during installation. Simply highlight the

Printer

Drivers Win95

item, then click

Change

to open the Select

Subcomponents dialog box. The ICM based driver can be selected there. However, when the ICM based driver is installed, you can still choose between ICM based or NEC’s color matching printing methods from the Color Control options located in the Graphics tab of the driver.

Installing the NIC

E F G H

Color Control Options 3

W

INDOWS

95/98

Revises page 36 of the User’s Guide.

Installing the Printer Driver

To install the Windows 95/98 printer driver from the

SuperScript 4400 Series CD:

1.

Insert the SuperScript 4400 Series CD into the CD-ROM drive.

2.

The Installer will launch automatically.

3.

Following the instructions displayed on the computer monitor.

4.

At the Setup Type window, select the Easy/Local installation option. At this point, you may click Change if you want to install the ICM based driver described above, otherwise, click Next to continue installing the default driver.

5.

When installation is complete, restart Windows.

note:

Pure binary data is not supported by PostScript when a computer is locally connected (directly connected using a parallel cable) to the printer. To assure communications between the computer and the printer, go to the PostScript tab of the driver, click Advanced to open the PostScript Options dialog box, then assure that the Pure Binary Data radio button is clear.

The Windows NT Shared Printer Driver

Revises page 36 of the User’s Guide.

Networked computers running Windows NT 4.0 that have a parallel connection to the printer can share the printer with

Windows 95 and Windows 98 print clients. This requires that the PostScript printer driver be installed on the Windows NT computer and that the driver be configured for sharing. Print clients then can use the network to install the PostScript printer driver from the Windows NT computer.

Description

As seen from a Windows 95 and Windows 98 computer, the shared Windows NT PostScript printer driver is similar to the

Windows 95 and Windows 98 PostScript drivers. They both have the same options, controls, and features, except the shared driver does not have an NEC Features tab. All the

4 SuperScript 4400 User’s Guide — Addendum options and controls located on the NEC Features tab are relocated to the Device Options tab of the shared driver.

Shown below is a picture of the shared driver with the

Device Options

tab in the front.

Sharing the Windows NT Postscript Printer Driver

Configuring the PostScript printer driver for sharing can be done during the installation of the driver from the SuperScript

4400 Series CD to the Windows NT computer, or after the driver has been installed on the Windows NT computer.

To configure sharing during driver installation:

1.

Insert the SuperScript 4400 Series CD into the

Windows NT computer to automatically launch the

Install Wizard.

2.

Follow the instructions presented by the Install Wizard to install the PostScript printer driver until the Get Shared

Information

dialog box appears.

3.

From the Get Shared Information dialog box, select the

Shared

radio button, then type in a name for the printer into the Share Name text box.

4.

Click Next to finish installing the driver.

To configure sharing after the driver is installed:

1.

From the Windows NT computer, click Start , select

Settings

, then click on Printers to open the Printers control panel.

2.

Click the printer with the right mouse button to open the shortcut menu.

3.

Select Sharing to open the printer driver. The Sharing tab will be automatically displayed.

4.

Select the Shared radio button.

5.

Type in a name for the printer into the Share Name text box.

6.

Click OK.

Installing the Shared Driver into Windows 95/98 Clients

After the Windows NT PostScript printer driver has been configured for sharing, a Windows 95 and Windows 98 client can use a network to install the driver from the Windows NT computer.

To install the shared driver:

1.

From the Windows 95 or Window 98 client, use the network to navigate to the Windows NT computer.

2.

Click the shared printer driver with the right mouse button to open the shortcut menu.

3.

Select Install .

4.

Follow the instructions presented by the Install Wizard to install the driver.

R

ESETTING THE

NIC

Revises page 57 of the User’s Guide.

Follow these steps to reset the NIC to its factory default settings.

1.

Press Online .

OFFLINE

appears on the display.

2.

Press Menu .

MENU - CONTROL appears on the display.

3.

Press Next until

RESET NIC appears on the display.

4.

Press Select, and when the panel displays

PARAMETERS

, press Select again.

R

EMOTE

P

RINTING

Revises page 60 of the User’s Guide.

Client System Requirements

You must have the following on your computer.

• A Windows 95/98 or Windows NT operating system.

• Microsoft Internet Explorer 4.01 SP1 or Microsoft Java

Virtual Machine. Either program can be obtained from the SuperScript 4400N Home Page or from Microsoft’s web site.

P

RINT

A

GENT

P

ROGRAM

M

ENUS

Revises page 61 of the User’s Guide.

Start

PrintAgent starts automatically when you try to print or use the printer property pages. Keeping it running speeds print time because you won’t have to wait for PrintAgent to start up every time you print. To monitor the printer status,

PrintAgent must be running. To start PrintAgent, press the

Windows Start button, select Programs , and select NEC

PrintAgent System

to display PrintAgent commands.

Choose Start . A red planet icon appears in the Windows Tool

Tray in the lower right-hand corner of the screen. If the planet doesn’t turn green after five seconds, PrintAgent did not launch properly. Restart your computer and try again.

P

ULL

P

RINTING

Revises page 63 of the User’s Guide.

This section shows system administrators how to configure a

Pull Printing Server to support print clients.

Server System Requirements

Prior to server installation, the Pull Printing Server must

already

have installed

• A Windows 95/98 operating system.

• Microsoft Word, Excel, and PowerPoint.

• The web server included on the SuperScript 4400 Series

Installer CD, which is automatically installed when pull/

printing/server

is selected under the Administration installation.

Resetting the NIC 5

• Internet Explorer 4.01 or Netscape Communicator 4.5

(these are available on the SuperScript 4400 Series CD)

To use Pull Printing:

1.

Set the IP Address on the printer. For instructions, see page 73.

2.

Install the NEC PrintAgent core software, Pull Printing

Server and/or Secondary File Server software.

3.

Configure URLs.

This section also provides the following instructions

• Setting Local User’s Web Browser Preferences (optional)

• Pull Printing from Your Desktop

U

SING

MAP

Revises page 77 of the User’s Guide.

Installing MAP

MAP is available on the SuperScript 4400 Series CD that comes with your printer. It must be installed from Windows 95/98 or Windows NT 4.0, and it cannot be installed from a command prompt.

note:

Do not install MAP on the same computer used by the Pull Printing Server.

1.

Insert the SuperScript 4400 Series CD into the CD-ROM drive.

2.

Use the Administrator installation option to install the

MAP utility, or go to the <CDROM Drive>\map directory and double click on setup.exe .

W

INDOWS

P

EER

-

TO

-P

EER

P

RINTING

S

ETUP

Revises page 80 of the User’s Guide.

Install Peer-to-Peer Utility

Follow these steps to install the correct software.

1.

Insert the SuperScript 4400 Series CD.

2.

Use the Administrator installation option to install the

Peer-to-Peer IP

or Peer-to-Peer IPX utility.

3.

Follow the Installation prompts.

6 SuperScript 4400 User’s Guide — Addendum

Add the Peer-to-Peer Printer Driver

1.

In Windows 95/98, press the Start button, select

Settings,

then select Printers .

2.

In the Printers window, double-click Add Printer . This launches the Add Printer wizard which prompts you to make selections.

note:

SuperScript 4400 printer drivers are provided on the SuperScript 4400 Series CD that comes with the printer.

3.

When the Add Printer wizard asks how the printer is attached, select Local printer .

4.

Click Have Disk and point to the 4400 CD.

• To install the ICM based driver, move to the ps95icm directory and select ncss4400.inf .

• To install the non-ICM based driver, move to the ps95 directory and select ncss4400.inf .

Click Next .

5.

Your peer-to-peer network printer will be listed under local printer ports and identified by the NIC serial number for the printer; for example,

NEC_911499

.

Select your new peer-to-peer printer.

6.

Continue responding to the Add Printer Wizard until the wizard process is complete.

7.

From the Windows Start button, select Settings then

Printers

to open the Printers window.

8.

With the left mouse button click on the printer icon and select Properties to start the printer driver.

9.

Click the Details tab to bring it to the front.

10. Click Spool Settings to open the Spool Settings dialog box.

11. Select the Disable bi-directional support for this

printer

radio button.

12. Click OK.

13. Click the General tab to bring it to the front.

14. Click Print Test Page to check if the driver is installed correctly.

R

EMOVING

P

EER

-

TO

-P

EER

S

OFTWARE

Revises page 81 of the User’s Guide.

Removing P2P-IPX

To remove the IPX peer-to-peer software from your computer, use the Peer-to-Peer-IPX Uninstall program. Follow these steps.

1.

Insert the SuperScript 4400 Series CD into the CD-ROM drive.

2.

From the Windows Start button and select Run to open the Run dialog box.

3.

Type in

<CD drive>:\P2PIPX\UNINSTAL.EXE

4.

Click OK.

5.

Follow the instructions presented by the Uninstall

Wizard.

R

EPLACING THE

O

ZONE

F

ILTER

Revises page 101 of the User’s Guide.

Part Number 126164

The Ozone Filter needs to be replaced about every 12 months.

1.

Slide open the Filter Cover located in back of the printer.

2.

Take the used Ozone Filter from inside the Filter Cover and discard it.

3.

Fit the new Ozone Filter inside the Filter Cover and slide it shut.

note:

An odor will come from the ozone filter if not replaced regularly.

P

ARALLEL

P

RINTING

P

ROBLEMS

Added to Chapter 9, “Troubleshooting.”

This section describes solutions to problems that might appear when a computer is locally connected (with a parallel cable) to the printer. Only Windows and UNIX computers can be locally connected.

Nothing Printed

The printer does not indicate that a print job was received and nothing was printed.

Solution

Assure the bidirectional parallel cable is attached securely.

Nonsense is Printed

This symptom appears as content that appears cryptic and does not make any sense.

Solution

• Assure that an IEEE 1284 compliant bidirectional cable is used.

• Assure that the computer provides an IEEE 1284 compliant parallel port.

Error Messages with Little or Nothing Printed

This may be a data communications problem between a

Windows 95 or higher computer and the printer.

Solutions for Windows 95 or Higher Computers

One of, or a combination of the following solutions may resolve the problem.

• With the printer driver open, click the Details tab to move it to the front. Click Spool Settings to open the

Spool Settings dialog box. Clear the Disable

bidirectional support for this printer

radio button.

Removing Peer-to-Peer Software 7

• From the Spool Settings dialog box, select Print directly

to the printer

radio button.

• Put the printer into unidirectional mode.

1.

From the printer Operator Panel, press the OFFLINE button.

2.

Press MENU .

3.

Press NEXT until

COMMUNICATIONS

appears.

4.

Press SELECT and

COMMUNICATIONS PARALLEL

PORT

will appear.

5.

Press SELECT.

6.

Press NEXT until

BIDI

appears.

7.

Press SELECT and

ON

will appear.

8.

Press NEXT until

OFF

appears.

9.

Press SELECT.

10. Press MENU .

11. Press ONLINE to finish.

To return the printer to directional mode, repeat the steps, but select

ON

in Step 8.

Solutions for UNIX Computers

• Put the printer into unidirectional mode.

1.

From the printer Operator Panel, press the OFFLINE button.

2.

Press MENU .

3.

Press NEXT until

COMMUNICATIONS

appears.

4.

Press SELECT and

COMMUNICATIONS PARALLEL

PORT

will appear.

5.

Press SELECT.

6.

Press NEXT until

BIDI

appears.

7.

Press SELECT and

ON

will appear.

8.

Press NEXT until

OFF

appears.

9.

Press SELECT.

10. Press MENU .

11. Press ONLINE to finish.

To return the printer to directional mode, repeat the steps, but select

ON

in Step 8.

R

ECOMMENDED

M

EDIA

Revises Appendix A and Appendix B.

Use NEC Premium papers (listed below) to ensure the best quality printed output. If you do not have the NEC Premium papers, try to match them as closely as possible for the best printing results.

Premium Color Laser Paper 24 lb. Bond:

A bright paper with a super smooth finish for brilliant color reproduction. Use this for correspondence, proposals, charts, graphs, and illustrations.

(NEC Order No. 70-510)

Premium Color Laser Paper 60 lb. Cover:

A heavier stock that is ideal for report covers, mailers, greeting cards and invitations.

(NEC Order No. 70-511)

Ultra Glossy Color Laser Paper:

Has a double-sided glossy finish that is preferred for professional printing and photographic art. Use this for data sheets, brochures, and client presentations.

(NEC Order No. 70-515)

Premium Transparency Film:

Use this for brilliant projected images.

(NEC Order No. 70-520)

NEC Premium Paper Sampler:

A sampler is available that contains a selection of all the NEC

Premium Papers.

(NEC Order No. 79-001)

8 SuperScript 4400 User’s Guide — Addendum

I

NDEX

Click on a page number to go to that subject.

C

Color Control Options

9

I

Image Color Matching (ICM)

9

M

MAP installing

12

N

NEC PrintAgent

12

NIC

7

Installing

8

Preparing the Printer

8

resetting

11

Testing

9

Upgrade Kit

7

O

Overview

7

Ozone Filter replacing

13

P

paper recommended

14

Paper Tray, Loading the

7

peer to peer printing adding the printer in Windows

12

moving a printer

12 removing software

12

PrintAgent

Starting

11

Printing problems parallel (local)

13

Pull Printing

Server Requirements

11

R

Remote Printing

11

T

transparencies

14

W

Windows 3.1x

7

Windows 95/98

10

Driver Installation

10

Windows NT shared driver

10

configure for sharing

10

description

10

installing

11

9

NEC Technologies, Inc.

1250 N. Arlington Heights Rd.

Itasca, IL 60143 www.nectech.com

P/N: 703-A0323-001

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents