Graco 3A1586C User's Manual


Add to my manuals
2 Pages

advertisement

Graco 3A1586C User's Manual | Manualzz

Instructions

ThermoLazer ™

Model 24H619

Box Rear Heat Kit

3A1586C

- For professional application of thermoplastic traffic marking compound materials

(reflective beads applied simultaneously with screeding) -

- For outdoor use only (not to be operated in rain or damp conditions) -

EN

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and instructions in manual 3A1319. Save these instructions.

ti22971a

Installation

4. Route hose as shown below.

1. Disconnect propane source.

ti14128a ti17144a

2. Remove plug and copper gasket (ferrule) from fitting.

5. Attach hose tee to fitting (21mm).

ti22975a ti17154b

3. Slide die heat kit over bead dispenser. Align slot on bracket with bead dispenser screw head as shown.

Bolt hole should also be aligned. ti22976a

6. Install screed box rear burner lighting instructions label (262) on screed shroud door below the torch lighting instruction label (261).

ti14144b ti22974a

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents

Original instructions. This manual contains English. MM 3A1586

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441

Copyright 2008, Graco Inc. is registered to I.S. EN ISO 9001 www.graco.com

Revision C - January 2014

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement