Electronic Access Control Catalogue

Electronic Access Control Catalogue
Electronic Access
Control Catalogue
Field Devices
Issue: September 2008
TAC – the Single Source for all
Your Electronic Access Needs
This catalogue presents the electronic access control portfolio offered by TAC’s Field
Device Product Division. The Division provides a single source for the field products
our customers require to complete their system installations. By dealing with one
trusted supplier, TAC’s customers save time and cost, fully confident of the quality,
performance, compatibility, and value for money of the items they buy.
The cards and card readers featured in the catalogue represent the day to day
interface between TAC’s access control systems and the users of those systems.
The products are manufactured by leading industry specialists and provide a choice
of different technologies to meet the diverse requirements of our customers.
For further details of the products and technologies featured in this catalogue,
contact your local TAC sales office or visit the manufacturers’ websites:
HID: www.hidcorp.com
Idesco: www.idesco.fi
Indala: www.indala.com
Global Leader in Building IT
TAC is a leading provider of building automation solutions based on Open Integrated
Systems for Building IT. TAC’s mission is to provide added value through building
environment services for indoor climate, security and use of energy, delivered with
advanced technology to end users and property owners throughout the world.
TAC offers its customers a total capability in terms of supply of hardware, software,
installation and support.
With over 80 years of experience in the HVAC, building automation and security
arenas, TAC employs more than 5,000 people worldwide, with partners and branches
in 80 countries. TAC’s parent company, Schneider Electric, is the world leader in
automation and electricity management, with over 90,000 employees worldwide,
and operations in 130 countries.
TAC is the fastest growing, most innovative company in the Building Automation
industry. We are at the forefront of growth because we deliver what our customers
want, year after year, building after building.
2
www.tac.com
Electronic Access Control Catalogue – Introduction
Table of Contents
INTRODUCTION
2
TECHNOLOGY OVERVIEW
5
13.56MHZ MIFARE® SMART CARD TECHNOLOGY 6
INDALA – READERS
MX Series Slim
MIFARE®
MX Series Square
6
Reader
MIFARE®
Reader
INDALA – CARDS
6
7
7
MIFARE®
1K Adhesive Tag
7
MIFARE®
4K Adhesive Tag
8
MIFARE®
1K ISO Card
9
MIFARE®
4K ISO Card
8
MIFARE®
1K ISO Card with Magnetic stripe
9
MIFARE®
4K ISO Card with Magnetic stripe
9
MIFARE®
1K Key Tag
9
MIFARE®
4K Key Tag
10
IDESCO – READERS
10
Access 7C Reader
10
Access 7C Quattro Reader
10
Access 7C PIN
11
Access 8CMt
11
Access 8CMt PIN Reader
12
Access Mfinger Biometric Reader
12
Access Mfinger Biometric Smart Coder
12
IDESCO – CARDS
13
MIFARE® 1K Card CM
13
MIFARE® 1K 2402 Coin Tag
13
Leather Coin Tag Key ring
13
MIFARE® 1K Sail Tag
14
MIFARE® 1K MFinger Card
14
13.56MHZ iCLASS® TECHNOLOGY
HID – READERS
15
R10 read only Reader
15
R30 EU sized read only Reader
15
R40 US sized read only Reader
16
RK40 read only keypad Reader
16
RWKL550 read/write LCD keypad Reader
16
RWKLB575 Bioclass Fingerprint Reader
16
CP575 Bioclass Enrollment Kit
17
HID – CARDS
17
2k/2 Tag
17
16k/16 Tag
17
2k/2 Card
18
16k/16 Card
18
16k/16
Electronic Access Control Catalogue – Table of Contents
15
iCLASS®/Prox
Card
19
2k/2 Key Fob
19
16k/16 Key Fob
19
3
20
IDESCO – CARDS
36
HID – READERS
20
EM 4102 Card
36
ProxPoint Plus Reader
20
Coin Tag
36
MiniProx Reader
20
Leather Coin Tag Key ring
36
Prox80 Reader
21
Sail Tag
36
Thinline II Reader
21
ProxPro Reader Without Keypad
21
ProxPro Reader With Keypad
22
MaxiProx Reader
22
HID – CARDS
23
MicroProx Sticky Tag
23
ProxCard II
23
IsoProx II
24
Smart IsoProx II
24
DuoProx II
24
ProxKey II Fob
25
INDALA – READERS
40
ProxPass Active Vehicle Tag
25
5000 Series 5 Volt, Mag Stripe Dorado Reader
40
INDALA – READERS
26
ABA Swipe Reader with Keypad
40
FlexPass Arch Slim Reader
26
INDALA – CARDS
40
Flexpass Wave Slim Reader
26
Pre-programmed Magnetic Stripe
40
Flexpass Arch WallSwitch Reader
27
Flexpass Wave WallSwitch Reader
28
APPENDICES
41
Flexpass Arch Mid-Range Reader
28
OBSOLETE PRODUCT TABLE
41-44
Flexpass Wave Mid-Range Reader
29
FlexPass KeyPad Reader
30
PART NUMBER DESCRIPTION
45
FlexPass Arch Long-Range Reader
31
HOW TO ORDER/ORDERING FORM
46
INDALA – CARDS
32
FlexPass Adhesive Tag
32
FlexCard Standard Card
32
FlexISO Imagable Prox Card
33
FlexKey® Fob
33
IDESCO – READERS
34
Access 7A Reader
34
Access 7A Quattro Reader
34
Access 7A PIN Reader
34
Access 8AH Reader
35
Access 8AH Quattro Reader
35
Access 8AH PIN Reader
35
PROXIMITY TECHNOLOGY
4
Electronic Access Control Catalogue – Table of Contents
Wiegand SWIPE TECHNOLOGY
37
HID – READERS
37
Classic Swipe Reader
37
Turnstile Reader
37
HID – CARDS
38
SensorCard
38
SensorCard II
39
ProxCard Plus
39
MAGNETIC SWIPE TECHNOLOGY
40
Technology Overview
TAC sources access cards and reader products from HID, Indala, and Idesco as proven
components within our control systems. A range of formats is available for each brand to ensure
full compatibility with our Continuum and I/NET systems.
Several technologies can be employed depending on user requirements. These include the
latest Smart Card and Biometric devices as well as the more traditional Wiegand, Proximity and
Magnetic Stripe.
System Compatibility
It is important to ensure that readers and cards are selected from the same manufacturer for use
on individual systems.
Smart Card Technology
A smart card is the size of a conventional credit card. It has an electronic microchip embedded
in it, which stores data and programs offering advanced security features. There are 3 types
of smart card: contact, contact-less and hybrid, the latter being a combination of any reading
technology. TAC offers a contact-less card reader system based on HID’s iCLASS® or the Phillips’
MIFARE® industry standard.
Biometrics Systems
Biometrics Systems are being actively developed and will become more of an everyday
item. These systems are superior due to the fact that they identify non transferable means
of identifying people. This could be in the form of fingerprint or eye retina recognition.
Proximity Technology
Proximity Technology is a contactless system that uses radio frequency to communicate between
the card/key fobs and the reader. The reader emits an r.f. magnetic field, that supplies energy
to the card for the power required for the devices to transfer data. Reading distances between
20 mm and 1 metre can be achieved by use of different readers.
Wiegand Technology
Wiegand Technology is a mature standard and works by embedding small lengths of special wire
into a card. This process offers a medium to high level of security. Wiegand cards take longer
than most to produce, so consideration should be given to lead times when ordering.
Magnetic Stripe Technology
Magnetic Stripe Technology is the most basic and most traditional form of access control.
Due to higher security needs, this technology is becoming less favoured. The basic operation
relies on a magnetic stripe on the back of the card that gets swiped into a reader.
bit Format
TAC offers four bit format options, and careful selection is required to ensure proper system
compatibility. The industry standard format for proximity and Wiegand is 26 bit. The transmission
of the information from the card reader to the TAC controller is referred to as a Wiegand output,
so normally you might hear a card format described as 26 bit Wiegand. TAC offers a 37 bit
format that offers a more secure access system. This format can only be obtained through TAC
for use with Continuum. There is also an intermediate, 32 bit option that can be used with all
TAC systems. TAC assigns a site code to each customer, so that the card access system is secure
from unauthorized cards being used from any other system.
Bit Format
Continuum
I/NET
Comments
26 bit
Generic format for all systems
32 bit AC4+4ACC
For Continuum legacy systems only
32 bit I/NET
Standard I/NET Format
37 bit ACC
Standard Continuum Format
Electronic Access Control Catalogue – Technology Overview
5
13.56MHz MIFARE®
Smart Card Technology
A smart card is the size of a conventional credit card. It has an electronic microchip
embedded in it which stores data and programmes offering advanced security features.
There are 3 types of smart card: contact, contact-less and hybrid. Hybrid Cards are a
combination of any reading technology. TAC offers a contact-less card reader system
based on HID’s iCLASS® or the Phillips MIFARE® industry standard.
Indala – Readers
The new Indala 13.56 MHz FlexSmart® reader family is compatible with INTRO (ISO 15693), MIFARE®, and DESFire™
technologies. Customers simply choose the Indala reader series with standard programming, or specify the data format and
security level that meets their configuration requirements. Indala does the rest. Available in many standard or custom Wiegand
formats, FlexSmart® readers provide a technically superior solution.
MX 200 Series Slim MIFARE® Reader
MX 200 Slim MIFARE® Readers can be configured to read any MIFARE® or ISO15693 card serial number (CSN), or data within a
secured MIFARE® card sector when programmed with a matching key. The MX 200 series of readers comply with the requirements
of ISO14443A. It’s the perfect choice for standard encrypted ID, data storage solutions and multiple applications. The default
MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
6
Part Number
Description
654-2404-100
MX Series Slim MIFARE®
Reader (Arch), 26 bit
654-2404-300
MX Series Slim MIFARE®
Reader (Arch), 32 bit I/NET
654-2404-400
MX Series Slim MIFARE®
Reader (Arch,), 37 bit
Continuum
654-2408-100
MX Series Slim MIFARE®
Reader (Wave), 26 bit
654-2408-300
MX Series Slim MIFARE®
Reader (Wave), 32 bit
I/NET
654-2408-400
MX Series Slim MIFARE®
Reader (Wave), 37 bit
Continuum
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
Black
0.5m
Fly Lead
109 mm x
38 mm x
18 mm
9-16
VDC
15 mA Typical
(75 mA Peak)
113 g
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Indala – Readers
MX 200 Series Square MIFARE® Readers
MX 200 Series Square MIFARE® Readers can be configured to read any MIFARE® or ISO15693 card serial number (CSN), or
data within a secured MIFARE® card sector when programmed with a matching key. The MX 200 series of readers comply with
the requirements of ISO14443A. The reader is ideal for installation onto a standard European back box. It’s the perfect choice
for standard encrypted ID, data storage solutions and multiple applications. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part Number
Description
654-2405-100
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 std), 26 bit
654-2405-300
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 std), 32 bit I/NET
654-2405-400
MX Series Square MIFARE®
Reader (wallswitch EU 80*80
std), 37 bit Continuum
654-2406-100
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 pin), 26 bit
654-2406-300
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 pin), 32 bit I/NET
654-2406-400
MX Series Square MIFARE®
Reader (wallswitch EU 80*80
pin), 37 bit Continuum
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
Black
Connector
Block
86 mm x
86 mm x
30 mm
9–16
VDC
20 mA Typical
(75 mA Peak)
160 g
Indala – Cards
The contactless MIFARE® card can be used for diverse applications, such as access control, cashless vending, public transportation,
airline ticketing, customer loyalty and photo ID cards. Sixteen securely separated files enable multiple applications and support
future growth.
MIFARE® 1K Adhesive Tag
The MIFARE® 1K Adhesive Tag can turn your plastic ID badge into a proximity credential. Effortlessly upgrade from magnetic stripe
or barium ferrite proximity technology by attaching the tag to your existing card. The MIFARE® 1K Adhesive tag will also adhere to
any non-metallic device, such as a mobile phone or PDA, to create an instant proximity badge. The default MIFARE® sector used
for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-2451-000
MIFARE® 1K Adhesive Tag
Unprogrammed
654-2451-100
MIFARE® 1K Adhesive Tag,
Sector 15
26 bit
654-2451-300
MIFARE® 1K Adhesive Tag,
Sector 15, I/NET
32 bit
654-2451-400
MIFARE® 1K Adhesive Tag,
Sector 15, Continuum
37 bit
Dimensions
Diameter 33 mm,
Thickness 1.8 mm
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Indala – Readers/Cards
7
MIFARE® 4K Adhesive Tag
The MIFARE® 4K Adhesive Tag can turn your plastic ID badge into a proximity credential. Effortlessly upgrade from magnetic stripe
or barium ferrite proximity technology by attaching the tag to your existing card. The MIFARE® 4K Adhesive tag will also adhere
to any non-metallic device, such as a cell phone or PDA, to create an instant proximity badge. The default MIFARE® sector used
for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
Dimensions
654-2452-000
MIFARE® 4K Adhesive Tag
Unprogrammed
654-2452-100
MIFARE® 4K Adhesive Tag,
Sector 15
26 bit
654-2452-300
MIFARE® 4K Adhesive Tag,
Sector 15, I/NET
32 bit
654-2452-400
MIFARE® 4K Adhesive Tag,
Sector 15, Continuum
37 bit
Diameter 33 mm,
Thickness 1.8 mm
MIFARE® 1K ISO Card
The MIFARE® 1K ISO Card is a credit card thin access credential with nominal thickness of 0.76mm. The credential comes with
a graphics quality surface on both sides of the card, and has the ability to contain multiple ID technologies in a single credential.
The default MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-2453-000
MIFARE® 1K ISO Card
Unprogrammed
654-2453-100
MIFARE® 1K ISO Card,
Sector 15
26 bit
654-2453-300
MIFARE® 1K ISO Card,
Sector 15, I/NET
32 bit
654-2453-400
MIFARE® 1K ISO Card,
Sector 15, Continuum
37 bit
Surface
Thickness
Graphics
0.76 mm
MIFARE® 4K ISO Card
The MIFARE® 4K ISO Card is a credit card thin access credential with nominal thickness of 0.76mm. The credential comes with
a graphics quality surface on both sides of the card, and has the ability to contain multiple ID technologies in a single credential.
The default MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
8
TAC-Part No.
Description
Coding
654-2454-000
MIFARE® 4K ISO Card
Unprogrammed
654-2454-100
MIFARE® 4K ISO Card,
Sector 15
26 bit
654-2454-300
MIFARE® 4K ISO Card,
Sector 15, I/NET
32 bit
654-2454-400
MIFARE® 4K ISO Card,
Sector 15, Continuum
37 bit
Surface
Thickness
Graphics
0.76 mm
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Indala – Cards
MIFARE® 1K ISO Card with Magnetic Stripe
The MIFARE® 1K ISO Card with Magnetic Stripe is a credit card thin access credential with nominal thickness of 0.76 mm. The
credential comes with a graphics quality surface on both sides of the card, and has the ability to contain multiple ID technologies
in a single credential. The default MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-2455-000
MIFARE® 1K ISO Card c/w
Magnetic stripe
Unprogrammed
654-2455-100
MIFARE® 1K ISO Card c/w
Magnetic stripe , Sector 15
26 bit
654-2455-300
MIFARE 1K ISO Card c/w
Magnetic stripe , Sector 15, I/NET
32 bit
654-2455-400
MIFARE® 1K ISO Card c/w
Magnetic stripe , Sector 15,
Continuum
37 bit
®
Surface
Thickness
Graphics
0.76 mm
MIFARE® 4K ISO Card with Magnetic Stripe
The MIFARE® 4K ISO Card with Magnetic Stripe is a credit card thin access credential with nominal thickness of 0.76 mm. The
credential comes with a graphics quality surface on both sides of the card, and has the ability to contain multiple ID technologies
in a single credential. The default MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-2456-000
MIFARE® 4K ISO Card c/w
Magnetic stripe
Unprogrammed
654-2456-100
MIFARE® 4K ISO Card c/w
Magnetic stripe , Sector 15
26 bit
654-2456-300
MIFARE® 4K ISO Card c/w
Magnetic stripe , Sector 15, I/NET
32 bit
654-2456-400
MIFARE® 4K ISO Card c/w
Magnetic stripe , Sector 15,
Continuum
37 bit
Surface
Thickness
Graphics
0.76 mm
MIFARE® 1K Key Tag
The MIFARE® 1K Key Tag contemporary design enables it to be easily attached to a key ring, badge clip or badge lanyard.
Built to withstand harsh operating environments, MIFARE® 1K Key Tag’s rugged double-sealed construction also allows for
customisation. By adding a company logo, the tag is ideally suited for vacation resorts, locker rooms, health spas, apartment
buildings, club houses, as well as commercial office spaces and industrial applications where photo ID’s are not required.
The default MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-2457-000
MIFARE® 1K Key Tag
Unprogrammed
654-2457-100
MIFARE® 1K Key Tag, Sector 15
26 bit
654-2457-300
MIFARE® 1K Key Tag, Sector 15, I/NET
32 bit
654-2457-400
MIFARE® 1K Key Tag, Sector 15, Continuum
37 bit
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Indala – Cards
Dimensions
44 mm x
30 mm x
6 mm
9
MIFARE® 4K Key Tag
The MIFARE® 4K Key Tag’s contemporary design enables it to be easily attached to a key ring, badge clip or badge lanyard.
Built to withstand harsh operating environments, the tag’s double-sealed construction also allows for customisation. By adding
a company logo, the tag is ideally suited for vacation resorts, locker rooms, health spas, apartment buildings, club houses, as well
as commercial office spaces and industrial applications where photo ID’s are not required. The default MIFARE® sector used for
TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
Dimensions
654-2458-000
MIFARE® 4K Key Tag
Unprogrammed
654-2458-100
MIFARE® 4K Key Tag, Sector 15
26 bit
654-2458-300
MIFARE® 4K Key Tag, Sector 15, I/NET
32 bit
654-2458-400
MIFARE® 4K Key Tag, Sector 15,
Continuum
37 bit
44 mm x
30 mm x
6 mm
Idesco – Readers
Idesco readers are designed for reliable and secure access control, data collection and people identification in various environments.
These multi-technology readers read the unique ID numbers of Philips MIFARE®, HID iCLASS® and most of the existing and
forthcoming ISO15693 tags.
Access 7C Reader
The Access 7C Basic Reader’s vandal-resistant design guarantees that the reader can be used in the most demanding surroundings.
The Basic housing is internationally registered and suitable for indoor and outdoor usage, and can even be installed directly onto
metal surfaces without additional insulation. The Access 7C range of readers makes use of serial number technology (CSN) and
this is provided in a 32 bit format.
Image
Part Number
Description
Colour
Physical
Dimensions
Power Supply
Current
requirements
Termination
Weight
654-3401-000
Access 7C Reader
(Black, 32 bit
Serial No, 3m
Cable, White
Lens)
Black
110 mm x
43 mm x
24 mm
24 VDC
(10-30 VDC)
100 mA
max.
3m Flying
Lead
244 g
Access 7C Quattro Reader
The square format of the Access 7C Quattro Reader is designed for mounting directly onto any electrical back box. The mounting
unit of the reader is equipped with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant snap-on cover
is placed on the mounting unit. The Access 7C range of readers makes use of serial number technology (CSN) provided in a
32 bit format.
Image
10
Part Number
Description
Colour
Physical
Dimensions
Power Supply
Current
requirements
Termination
Weight
654-3402-000
Access 7C
Quattro Reader
(Black, 32 bit
Serial No, 3m
Cable)
Black
86 mm x
86 mm x
17 mm
24 VDC
(10-30 VDC)
100 mA
max.
3m Flying
Lead
244 g
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Indala – Cards/Idesco – Readers
Access 7C PIN
The Access 7C PIN improves security in access control by providing PIN code identification to be used together with an
identification card. The keypad of the reader is based on EMFi foil technology. The EMFi foil senses the pressure changes
on the active key area when pressed. There are no moving parts in the PIN pad, and due to this no maintenance is required.
The Access 7C range of readers makes use of serial number technology (CSN) provided in a 32 bit format.
Image
Part Number
Description
654-3403-000
Access 7C PIN
Reader (Black, 32 bit
Serial No, 3M Cable,
White Lens)
654-3404-000
Colour
Physical
Dimensions
Power Supply
Current
requirements
Termination
Weight
Black
138 mm x
44 mm x
24 mm
24 VDC
(10-30 VDC)
100 mA
max.
3m Flying
Lead
244 g
Access 7C PIN
Reader (Black, 32 bit
Serial No, 3M Cable,
White Lens, Backlit)
Access 8CMt
Access 8CMt readers are designed for reliable and secure access control, data collection and people identification in various
environments. The Access 8CMt MIFARE® memory reader reads compatible application-specific data from one selected sector
of the MIFARE® standard cards, and also supports MIFARE® multi-application cards. The default MIFARE® sector used for TAC
cards and readers is sector 15, unless otherwise requested.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3405-000
Access 8CMt
Reader (All TACbit Formats, Sector
15, White Lense)
Black
3m Fly Lead
110 mm x
43 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA Max.
244 g
Access 8CMt Quattro Reader
The Access 8CMt Quattro Reader is designed for mounting directly onto any electrical back box. The mounting unit of the reader
is equipped with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant snap-on cover is placed on the
mounting unit. The Access 8CMt MIFARE® memory reader reads compatible application-specific data from one selected sector
of the MIFARE® standard cards, and also supports MIFARE® multi-application cards. The default MIFARE® sector used for TAC
cards and readers is sector 15, unless otherwise requested.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3406-000
Access 8CMt
Quattro Reader (All
TAC- bit Formats,
Sector 15)
Black
3m Fly Lead
86 mm x
86 mm x
17 mm
24 VDC
(10-30 VDC)
130 mA
max.
315 g
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Idesco – Readers
11
Access 8CMt PIN Reader
The Access 8CMt PIN Reader improves security in access control by providing PIN code identification to be used together with
an identification card. The keypad of the reader is based on EMFi foil technology. There are no moving parts in the PIN pad,
and due to this no maintenance is required. The default MIFARE® sector used for TAC cards and readers is sector 15 unless
otherwise requested.
Image
Part Number
Description
654-3407-000
Access 8CMt PIN
Reader (All TACbit Formats, Sector
15, White Lens)
654-3408-000
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
Black
3m Fly Lead
138 mm x
44 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA max
325 g
Access 8CMt PIN
Reader (All TACbit Formats, Sector
15, White Lens,
Backlit)
Access Mfinger Biometric Reader
The Access MFinger Biometric Reader is a high security biometric reader combining security features of the MIFARE® smart card
technology and the user’s individual and unique fingerprint. The reader compares a fingerprint stored in a MIFARE® smart card
with the scanned fingerprint before transmitting data into the system. MIFARE® security keys protect the templates inside the card.
The Mfinger reader makes use of serial number technology provided in a 32 bit format. Please note this Biometric reader must be
used in combination with the Access 7C range of readers.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Power
consumption
Weight
654-3901-000
Access Mfinger
Biometric Reader
(Serial No, Keypad),
8 bit burst Wiegand
Black
Terminal strip
111 mm x
138 mm x
44 mm
12-24 VDC
<5W
560 g
Access Mfinger Biometric Smart Coder
With the Access MFinger Biometric Smart Coder you can easily enrol fingerprints, configure your Access Mfinger readers
and set security privileges for each user. The Access MFinger smart coder kit includes management software, desktop reader
and a desktop scanner.
Image
12
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Power
consumption
Weight
654-3902-000
Access Mfinger
Biometric Smart Coder
(Serial No, Keypad),
8 bit burst Wiegand
Black
Terminal strip
111 mm x
138 mm x
44 mm
12-24 VDC
<5W
500 g
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Idesco – Readers
Idesco – Cards
Idesco offers a wide range of 13.56Mhz tags and cards. Typical applications for these products include access control, time
and attendance and asset marking.
MIFARE® 1K Card CM
The PVC MIFARE® 1K Card CM has good printability with thermal transfer and dye-sublimation printers. The default MIFARE®
sector used for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-3450-000
MIFARE® 1K Card CM, Serial Number
Unprogrammed
654-3450-100
MIFARE® 1K Card CM, Sector 15
26 bit
654-3450-300
MIFARE 1K Card CM, Sector 15, I/NET
32 bit
654-3450-400
MIFARE® 1K Card CM, Sector 15,
Continuum
37 bit
®
Surface
Thickness
Graphics
1 mm
MIFARE® 1K 2402 Coin Tag
The epoxy laminated MIFARE® 1K 2402 Coin Tag is easy to fix in a convenient leather key ring. The default MIFARE® sector used
for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
Dimensions
654-3451-000
MIFARE® 1K 2402 Coin Tag, Serial Number
Unprogrammed
654-3451-100
MIFARE® 1K 2402 Coin Tag, Sector 15
26 bit
654-3451-300
MIFARE® 1K 2402 Coin Tag, Sector 15, I/NET
32 bit
654-3451-400
MIFARE® 1K 2402 Coin Tag, Sector 15, Continuum
37 bit
Radius 12 mm
Thickness 2 mm
Leather Coin Tag Key ring
To be used with the Milfare 1K 2402 Coin Tags.
Image
TAC-Part No.
Description
Dimensions
654-3352-000
Leather Coin Tag Key ring,
Serial No, Format
63 mm x 35 mm
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Idesco – Cards
13
Idesco – Cards
MIFARE® 1K Sail Tag
The MIFARE® 1K Sail Tag key ring is very robust and beautifully designed for everyday use. The default MIFARE® sector used
for TAC cards and readers is sector 15, unless otherwise requested.
Image
TAC-Part No.
Description
Coding
654-3452-000
MIFARE® 1K Sail Tag, Serial Number
Unprogrammed
654-3452-100
MIFARE® 1K Sail Tag, Sector 15,
26 bit
654-3452-300
MIFARE 1K Sail Tag, Sector 15, I/NET
32 bit
654-3452-400
MIFARE® 1K Sail Tag, Sector 15,
Continuum
37 bit
Dimensions
55 mm x 30 mm
®
MIFARE® 1K MFinger Card
A Fingerprint template is stored on the MIFARE® 1K Mfinger Card making it possible to store two fingerprint templates per user
on the 1K card.
Image
14
TAC-Part No.
Description
Coding
Thickness
654-3950-000
MIFARE® 1K MFinger Card, Serial
Number, Finger Template on Card
Unprogrammed
1 mm
Electronic Access Control Catalogue – 13.56MHz Mifare Smart Card Technology – Idesco – Cards
13.56MHz iCLASS®
Technology
iCLASS® smart readers and cards make access control more powerful, more versatile
and offer enhanced security through data encryption and mutual authentication between
the reader and cards. iCLASS® readers are user-friendly, delivering the same convenience
and reliability of HID’s Prox technology.
HID – Readers
These readers support FIPS 201 PIV (Personal Identification Verification). Fully compliant iCLASS® contactless smart card readers
are available to output the FASC-N (Federal Agency Smart Credential Number) in multiple configurations, providing the versatility
to support both existing and new access control systems. Standard communication protocols make it easy to replace existing
access control card readers with HID FIPS 201 compliant card readers.
R10 Read Only Reader
The R10 Read Only Reader’s slim design is perfect for metal mullions or any other space-limited installation, providing a standard
Wiegand output, suitable for all TAC access control systems. The R10 offers the ability to read 32 bit MIFARE® serial numbers,
and allows encrypted data transfer between the card and the reader through the use of secure algorithms.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1501-000
R10 read only
Reader
Black
0.5m
Fly Lead
48 mm x
40 mm x
8 mm
10-16 VDC
Ave: 80 mA
Peak: 225 mA
@12V
91 g
R30 EU Sized Read Only Reader
The R30 EU Sized Read Only Reader is designed to cover 80 mm x 80 mm square European back boxes, with slotted mounting
plate, and also provides for Asian back box spacing. The R30 provides a standard Wiegand output, suitable for all TAC access
control systems. The R30 offers the ability to read 32 bit MIFARE® serial numbers. Allows encrypted data transfer between
the card and the reader through the use of secure algorithms.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1502-000
R30 EU sized
read only
Reader
Black
0.5m
Fly Lead
84 mm x
84 mm x
19 mm
10-16 VDC
Ave: 80 mA
Peak: 225 mA
@12V
113 g
Electronic Access Control Catalogue – 13.56MHz iCLASS® Technology – HID – Readers
15
R40 US Sized Read Only Reader
The R40 US Sized Read Only Reader is designed to mount and cover single gang switch boxes, primarily used in the United States,
and offers the ability to read 32 bit MIFARE® serial numbers. Allows encrypted data transfer between the card and the reader
through the use of secure algorithms.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1502-000
R30 EU sized read
only Reader
Black
0.5m
Fly Lead
84 mm x
84 mm x
19 mm
10-16 Vdc
Ave: 80 mA,
225 mA
peak@12V.
250 g
RK40 Read Only Keypad Reader
The RK40 Read Only Keypad Reader is designed to mount and cover single gang switch boxes and includes a slotted mounting
plate for European and Asian back box spacing. This device also offers the ability to read 32 bit MIFARE® serial numbers and
includes a heavy duty keypad. It allows encrypted data transfer between the card and the reader through the use of secure
algorithms.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1504-000
RK40 read only
keypad Reader,
8 bit burst Wiegand
Black
Terminal
Blocks
84 mm x
122 mm x
23 mm
10-16 VDC
Ave: 72 mA
Peak: 244 mA
@12V.
283 g
RWKL550 Read/Write LCD Keypad Reader
The RWKL550 Read/Write LCD Keypad Reader uses 13.56 MHz contactless smart card technology. BioCLASS products provide
users with new options for supporting multi-authentication of identity. Uses a personal identification number (PIN) number along
with a contactless card presentation.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1505-000
RWKL550 read/
write LCD keypad
Reader, 8 bit burst
Black
Terminal
Blocks
147 mm x
96 mm x
30 mm
9-12 VDC
250 mA
Standby /
450 mA peak
218 g
RWKLB575 Bioclass Fingerprint Reader
The RWKLB575 Bioclass Fingerprint Reader uses 13.56 MHz contactless smart card technology. BioCLASS products provide
users with new options for supporting multi-authentication of identity. Combines a contactless card presentation with a
fingerprint biometric.
Image
16
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1906-000
RWKLB575 Bioclass
Fingerprint Reader,
8 bit burst
Black
Terminal
Blocks
203 mm x
96 mm x
35 mm
9-12 VDC
350 mA
Standby /
520 mA peak,
283 g
Electronic Access Control Catalogue – 13.56MHz iCLASS® Technology – HID – Readers
CP575 Bioclass Enrollment Kit
The iCLASS® CP575A Enrollment Kit is designed for on-site programming of access control data, Personal Identification Number
(PIN) codes, and user data onto HID iCLASS® cards. Allows HID proximity formats, keypad PIN codes and user data fields to be
programmed directly into iCLASS® contactless smart cards.
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-1907-000
CP575 Bioclass
Enrollment Kit
Black
Terminal
Block
211 mm x
130 mm x
113 mm
12 VDC
350 mA
Standby /
520 mA peak
27 g
Image
HID – Cards
HID supports 13.56 MHz iCLASS® read/write contactless smart card technology in various combinations with magnetic stripe
and contact smart chip module.
2k/2 Tag
The 2k/2 Tag provides the convenience of HID’s iCLASS® contactless read/write technology in a small disk-shaped package.
Allows users to easily and cost-effectively turn a plastic ID badge or contact smart chip card into a contactless smart card.
This self-adhesive tag attaches easily to mobile phones, PDAs, and other non-metallic objects. All 2K bit (256 bytes) iCLASS®
credentials are available in two application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1551-000
2k/2 Sticky Tag
unprogrammed
654-1551-100
2k/2 Sticky Tag
26 bit
654-1551-300
2k/2 Sticky Tag, I/NET
32 bit I/NET
654-1551-400
2k/2 Sticky Tag, Continuum
37 bit
Dimensions
Diameter 33 mm,
Thickness 1.8 mm
16k/16 Tag
The 16k/16 Tag provides the convenience of HID’s iCLASS® contactless read/write technology in a small disk-shaped package.
Allows users to easily and cost-effectively turn a plastic ID badge or contact smart chip card into a contactless smart card.
Attaches easily to mobile phones, PDAs, and other non-metallic objects. All 16K bit (2k bytes) iCLASS® credentials are offered
in sixteen application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1552-000
16k/16 Sticky Tag
unprogrammed
654-1552-100
16k/16 Sticky Tag
26 bit
654-1552-300
16k/16 Sticky Tag, I/NET
32 bit I/NET
654-1552-400
16k/16 Sticky Tag, Continuum
37 bit
Electronic Access Control Catalogue – 13.56MHz iCLASS® Technology – HID – Readers/Cards
Dimensions
Diameter 33 cm,
Thickness 1.8 mm
17
2k/2 Card
The iCLASS® 2k/2 Card offers the ability to add a magnetic stripe, barcode, anti-counterfeiting feature, custom artwork, or photo
ID. Meets ISO standards for thickness for use with direct image and thermal transfer printers. All 2K bit (256 bytes) iCLASS®
credentials are available in two application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1553-000
2k/2 Card
unprogrammed
654-1553-100
2k/2 Card
26 bit
654-1553-300
2k/2 Card, I/NET
32 bit
654-1553-400
2k/2 Card, Continuum
37 bit
Surface
Thickness
Graphics
0.84 mm
16k/16 Card
The iCLASS® 16k/16 Card offers the ability to add a magnetic stripe, barcode, anti-counterfeiting feature, custom artwork, or
photo ID. Meets ISO standards for thickness for use with direct image and thermal transfer printers. All 16K bit (2k bytes) iCLASS®
credentials are offered in sixteen application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1554-000
16k/16 Card
unprogrammed
654-1554-100
16k/16 Card
26 bit
654-1554-300
16k/16 Card, I/NET
32 bit
654-1554-400
16k/16 Card, Continuum
37 bit
Surface
Thickness
Graphics
0.84 mm
2k/2 iCLASS®/Prox Card
The 2k/2 iCLASS®/Prox Card combines iCLASS® read/write technology and HID 125 kHz proximity technology in a single ISO
standard thickness card. This enables contactless smart card applications to be added to an existing HID proximity technology
access control system. Offers the ability to add a magnetic stripe, barcode, anti-counterfeiting feature, custom artwork, or photo
ID. All 2K bit (256 bytes) iCLASS® credentials are available in two application area configuration only.
Image
18
TAC-Part No.
Description
Coding
654-1555-000
2k/2 iCLASS®/Prox Card
unprogrammed
654-1555-100
2k/2 iCLASS®/Prox Card
26 bit
654-1555-300
2k/2 iCLASS®/Prox Card, I/NET
32 bit
654-1555-400
2k/2 iCLASS®/Prox Card, Continuum
37 bit
Electronic Access Control Catalogue – 13.56MHz iCLASS® Technology – HID – Cards
Surface
Thickness
Graphics
0.84 mm
16k/16 iCLASS®/Prox Card
The 16k/16 iCLASS®/Prox Card combines iCLASS® read/write technology and HID 125 kHz proximity technology in a single
ISO standard thickness card. This enables contactless smart card applications to be added to an existing HID proximity technology
access control system. Offers the ability to add a magnetic stripe, barcode, anti-counterfeiting feature, custom artwork, or photo
ID. All 16K bit (2k bytes) iCLASS® credentials are offered in sixteen application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1556-000
16k/16 iCLASS®/Prox Card
unprogrammed
654-1556-100
16k/16 iCLASS®/Prox Card
26 bit
654-1556-300
16k/16 iCLASS®/Prox Card, I/NET
32 bit
654-1556-400
16k/16 iCLASS®/Prox Card, Continuum
37 bit
Surface
Thickness
Graphics
0.84 mm
2k/2 Key Fob
The 2k/2 Key Fob incorporates iCLASS® contactless read/write technology into a convenient device approximately the size of
an automotive key. Molded plastic enclosure provides durability in harsh environments. Provides an external number for easy
identification and control. Can be placed on a key ring or clipped to a lanyard for convenient entry.All 2K bit (256 bytes) iCLASS®
credentials are available in two application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1557-000
2k/2 Key Fob
unprogrammed
654-1557-100
2k/2 Key Fob
26 bit
654-1557-300
2k/2 Key Fob, I/NET
32 bit
654-1557-400
2k/2 Key Fob, Continuum
37 bit
Dimensions
3.4 mm x 32 mm x
38 mm
16k/16 Key Fob
The 16k/16 Key Fob incorporates iCLASS® contactless read/write technology into a convenient device approximately the size
of an automotive key. Molded plastic enclosure provides durability in harsh environments. Provides an external number for easy
identification and control. Can be placed on a key ring or clipped to a lanyard for convenient entry. All 16K bit (2k bytes) iCLASS®
credentials are offered in sixteen application area configuration only.
Image
TAC-Part No.
Description
Coding
654-1558-000
16k/16 Key Fob
unprogrammed
654-1558-100
16k/16 Key Fob
26 bit
654-1558-300
16k/16 Key Fob, I/NET
32 bit
654-1558-400
16k/16 Key Fob,
Continuum
37 bit
Electronic Access Control Catalogue – 13.56MHz iCLASS® Technology – HID – Cards
Dimensions
3.4 mm x 32 mm x
38 mm
19
Proximity Technology
Proximity Technology is a contactless system that uses radio frequency to communicate
between the card/keyfobs and the reader. The reader emits an r.f. magnetic field that
supplies energy to the card for the power required for the devices to transfer data.
Reading distances between 20 mm and 1 metre can be achieved by use of different readers.
HID – Readers
The HID line of proximity readers offers highly reliable operation with consistent read range and performance. The units read
multiple Wiegand formats and every model is designed for both indoor and outdoor use. All models provide a standard multicolour LED with internal or host control and a standard audible read indicator that is on/off selectable.
ProxPoint Plus Reader
The ProxPoint Plus Reader offers a compact and economical solution for most standard access control requirements. Its potted
electronics are ideal for both indoor and outdoor applications. The reader is fully compatible with all TAC access control systems
and suitable for all TAC proprietary bit formats. These readers accept a supply of 5-16 VDC and they have a read range of
25 to 75 mm.
Image
Part Number
Description
654-1301-000
654-1302-000
654-1303-000
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
0.5m
Fly Lead
80 mm x
43 mm x
17 mm
5-16 VDC
Average 30 mA,
Peak 75 mA
75 g
Grey
ProxPoint
Plus Reader
654-1304-000
Beige
Black
White
MiniProx Reader
The MiniProx Reader boasts an epoxy sealed, slim design that allows the reader to be mounted indoor or out, even directly
on metal with no change in read range performance. Accepts 5-16 volts and has a maximum read range of 100 to 140 mm.
Image
Part Number
Description
654-1305-000
654-1306-000
654-1307-000
Colour
Grey
MiniProx
Reader
Beige
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
152 mm x
43 mm x
19 mm
5-16 VDC
Average 20 mA,
Peak 110 mA
@ 12VDC.
108 g
0.5m
Fly Lead
Grey
Terminal Strip
654-1308-000
20
Beige
Electronic Access Control Catalogue – Proximity Technology – HID – Readers
Prox80 Reader
The Prox80 Reader is an 80 mm square reader designed to mount directly onto European single-gang electrical back boxes.
With a three-piece, weatherproof potted enclosure and long flying lead of 2.7m, the Prox 80 is easily installed, accepts 5-16 VDC
and provides a maximum read range of 37 to 140 mm. The reader is fully compatible with all TAC access control systems.
Image
Part Number
Description
654-1309-000
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
5-16 VDC
Average 30 mA,
Peak 110mA
@ 5 VDC;
Average 20 mA,
Peak 115 mA
@ 12 VDC
63 g
Grey
Prox80
Reader
654-1310-000
2.7m
Fly Lead
80 mm x
80 mm x
20 mm
White
Thinline II Reader
The ThinLine II Reader provides the same performance and reliability as the MiniProx but with a low profile appearance.
This reader can be mounted directly on metal with minimal impact on the read range performance. As with the MiniProx,
the ThinLine II accepts 5-16 volts and a maximum read range of 100 to 140 mm.
Image
Part Number
Description
654-1311-000
654-1312-000
654-1313-000
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
0.45m
Fly Lead
11.9 mm x
76 mm x
17 mm
5-16 VDC
Average 20 mA,
Peak 115 mA
@ 12 VDC.
94 g
Beige
Thinline II
Reader
654-1314-000
White
Black
Grey
ProxPro Reader Without Keypad
The ProxPro Reader Without Keypad combines all the electronics usually found in two separate packages. Ideal for medium range
applications, the ProxPro offers high reliability, consistent read range characteristics and low power consumption. It is available
with an optional, integrated, weather resistant keypad (see next section) offering an additional level of security by allowing the
use of a personal identification number (PIN). Maximum read range of 76 mm to 230 mm.
Image
Part Number
Description
Colour
654-1315-000
ProxPro
Reader
without
Keypad
Grey
654-1316-000
Beige
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Terminals
127 mm x
127 mm x
25 mm
10-29 VDC
Average 100 mA,
Peak 120 mA
@ 24 VDC
336 g
Electronic Access Control Catalogue – Proximity Technology – HID – Readers
21
ProxPro Reader With Keypad
The ProxPro Reader With Keypad combines all the electronics usually found in two separate packages. Ideal for medium range
applications, the ProxPro offers high reliability, consistent read range characteristics and low power consumption. It is available
with an optional, integrated, weather resistant keypad offering an additional level of security by allowing the use of a personal
identification number (PIN). The keypad interfaces with the host system either by sending the data over the data output lines
or via a direct connection to the host keypad interface. Maximum read range: 76 mm to 230 mm.
Image
Part Number
Description
Colour
654-1317-000
ProxPro
with Keypad,
8bit burst
Wiegand
Grey
654-1318-000
654-1319-000
654-1320-000
ProxPro
with Keypad,
3*4 matrix
Wiegand
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Terminals
127 mm x
127 mm x
25 mm
10-28.5 VDC
Average 100 mA
Peak 120 mA
@ 24 VDC
336 g
Beige
Grey
Beige
MaxiProx Reader
The MaxiProx Reader is ideal for long range applications. New signal processing techniques incorporated in this reader provide
a high tolerance to burst and other transient types of ambient RF interference. This makes the MaxiProx ideal for installations
incorporating parking control, or where special consideration is needed to facilitate access to physically challenging environments.
Power requirements are 12 or 24VDC and the unit interface with all existing Wiegand protocol access control systems.
Maximum read range: 230 mm to 760 mm.
Image
Part Number
654-1321-000
22
Description
MaxiProx
Reader
Colour
Grey
Termination
Terminals
Physical
Dimensions
305 mm x
305 mm x
25 mm
Electronic Access Control Catalogue – Proximity Technology – HID – Readers
Power
Supply
Current
Requirements
Weight
12 or 24 VDC
Average 200 mA,
Peak 700 mA
@ 12VDC;
Average 260 mA,
Peak 1.2 A
@ 24 VDC.
1.4 kg
HID – Cards
The HID line of Proximity Cards are housed in a thin, durable package approximately the size of a credit card. The cards are strong
and flexible and therefore highly resistant to cracking and breaking.
MicroProx Sticky Tag
The MicroProx Sticky Tag incorporates proximity technology into a small disc-shaped self-adhesive transponder. It provides
a seamless upgrade from Wiegand swipe or magnetic stripe technologies, ideal for dual systems applications and offers great
flexibility. Compatible with all HID proximity readers, and has a typical maximum read range of 51 to 114 mm.
Image
TAC-Part No.
Description
Coding
654-1350-000
MicroProx Sticky Tag (Grey)
Unprogrammed
654-1350-100
MicroProx Sticky Tag (Grey)
26 bit
654-1350-200
MicroProx Sticky Tag (Grey),
AC 4+4, Continuum
32 bit
654-1350-300
MicroProx Sticky Tag (Grey), I/NET
32 bit
654-1350-400
MicroProx Sticky Tag (Grey),
Continuum
37 bit
Dimensions
Diameter 33 mm
Thickness 1.78 mm
ProxCard II
The Prox Card II incorporates radio frequency identification electronics into a cost-effective, durable polycarbonate package the
size of a credit card. Thin and flexible enough to be carried in a wallet, the ProxCard II replaces the thick, rigid cards previously
associated with proximity technology. Complete with a vertical slot punch and external card numbering. These cards are not
suitable for direct image printing.
Image
TAC-Part No.
Description
Coding
654-1351-000
ProxCard II, prox card
Unprogrammed
654-1351-100
ProxCard II, prox card
26 bit
654-1351-200
ProxCard II, prox card, AC 4+4,
Continuum
32 bit
654-1351-300
ProxCard II, prox card, I/NET
32 bit
654-1351-400
ProxCard II, prox card, Continuum
37 bit
Electronic Access Control Catalogue – Proximity Technology – HID – Cards
Thickness
1.8 mm
23
IsoProx II
The ultra-thin IsoProx II card offers proximity technology and photo identification on a single access control card. A photo ID can
be printed directly onto the card using a direct image printer.
Image
TAC-Part No.
Description
Coding
654-1352-000
IsoProx II prox card
Unprogrammed
654-1352-100
IsoProx II prox card
26 bit
654-1352-200
IsoProx II prox card, AC 4+4, Continuum
32 bit
654-1352-300
IsoProx II prox card, I/NET
32 bit
654-1352-400
IsoProx II prox card, Continuum
37 bit
Surface
Thickness
Graphics
0.84 mm
Smart IsoProx II
The Smart ISOProx II card meets requirements for proximity access control, network access, data security, debit transactions,
parking, health information storage and photo ID with a single card. Offers universal compatibility with all HID proximity readers.
This card can accommodate custom artwork, direct image printing, magnetic stripes, bar codes and contact smart chip modules.
Image
TAC-Part No.
Description
Coding
654-1353-000
IsoProx II prox card
Unprogrammed
654-1353-100
IsoProx II prox card
26 bit
654-1353-200
IsoProx II prox card, AC 4+4, Continuum
32 bit
654-1353-300
IsoProx II prox card, I/NET
32 bit
654-1353-400
IsoProx II prox card, Continuum
37 bit
Surface
Thickness
Graphics
0.84 mm
DuoProx II
DuoProx II cards combine proximity technology, magnetic stripe technology and photo identification on a single card.
By combining technologies on one card, the DuoProx II card provides the benefit of proximity technology for access control
applications and meets the requirements for industry standard magnetic stripe applications. It also offers the ability to print
a photo ID directly onto the card with a direct vinyl printer. Complete with external card numbering.
Image
24
TAC-Part No.
Description
Coding
654-1354-000
DuoProx II prox card
Unprogrammed
654-1354-100
DuoProx II prox card
26 bit
654-1354-200
DuoProx II prox card, AC 4+4, Continuum
32 bit
654-1354-300
DuoProx II prox card, I/NET
32 bit
654-1354-400
DuoProx II prox card, Continuum
37 bit
Electronic Access Control Catalogue – Proximity Technology – HID – Cards
Surface
Thickness
Graphics
0.84 mm
ProxKey II Fob
The ProxKey II Fob incorporates proximity technology into a device the size of a car key. Small and convenient, the ProxKey II
is always there when you need it.
Image
TAC-Part No.
Description
Coding
654-1355-000
ProxKey II Fob, (Grey)
Unprogrammed
654-1355-100
ProxKey II Fob, (Grey)
26 bit
654-1355-200
ProxKey II Fob, (Grey) AC 4+4,
Continuum
32 bit
654-1355-300
ProxKey II Fob, (Grey) I/NET
32 bit
654-1355-400
ProxKey II Fob, (Grey) Continuum
37 bit
Dimensions
48 mm x
23 mm x
9 mm
ProxPass Active Vehicle Tag
The ProxPass Active Vehicle Tag is an active tag specifically designed for vehicle access control. Providing convenient access control
for parking and fleet management applications, Provides a 1200 mm to 2400 mm read range. Velcro backing attaches easily to
interior of vehicle windshield. Compatible with MaxiProx® reader and all HID card formats and offers a two to five year battery
life, depending on usage.
Image
TAC-Part No.
Description
Coding
654-1356-000
ProxPass Active Vehilcle Tag
Unprogrammed
654-1356-100
ProxPass Active Vehilcle Tag
26 bit
654-1356-200
ProxPass Active Vehilcle Tag,
AC 4+4, Continuum
32 bit
654-1356-300
ProxPass Active Vehilcle Tag, I/NET
32 bit
654-1356-400
ProxPass Active Vehilcle Tag,
Continuum
37 bit
Electronic Access Control Catalogue – Proximity Technology – HID – Cards
Surface
Thickness
Brushed
7.6 mm
25
Indala – Readers
Indala FlexPass readers provide a stylish way to manage the accessibility of critical places, people, goods and information.
Suitable for both indoor and outdoor use. Please note that one of the enhanced security features of the Indala product range
is that the bit format of the reader and the card must be identical to correctly decode the encrypted data on the card.
FlexPass Arch Slim Reader
The FlexPass Arch Slim Reader is designed to mount onto a doorframe or other small location. Operating from an input voltage
of 4-16 VDC, the maximum read range is up to 127 mm using FlexCard® standard cards.
Image
Part Number
Description
654-2306-100
Arch Slim Reader – 26bit
654-2306-200
Arch Slim Reader – 32bit
AC4+4
654-2306-300
Arch Slim Reader – 32bit I/NET
654-2306-400
Arch Slim Reader – 37bit
654-2307-100
Arch Slim Reader – 26bit
654-2307-200
Arch Slim Reader – 32bit
AC4+4
654-2307-300
Arch Slim Reader – 32bit I/NET
654-2307-400
Arch Slim Reader – 37bit
654-2308-100
Arch Slim Reader – 26bit
654-2308-200
Arch Slim Reader – 32bit
AC4+4
654-2308-300
Arch Slim Reader – 32bit I/NET
654-2308-400
Arch Slim Reader – 37bit
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
114 mm x
43 mm x
20 mm
4-16
VDC
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
125 g
Black
Grey
Beige
FlexPass Wave Slim Reader
The FlexPass Wave Slim Reader is designed to mount onto a doorframe or other small location. Operating from an input voltage
of 4-16 VDC, the maximum read range is up to 127 mm using FlexCard® standard cards.
Image
26
Part Number
Description
654-2309-100
Wave Slim Reader – 26bit
654-2309-300
Wave Slim Reader – 32bit
I/NET
654-2309-400
Wave Slim Reader – 37bit
Colour
Black
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
140 mm x
43 mm x
28 mm
4-16
VDC
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
170 g
Electronic Access Control Catalogue – Proximity Technology – Indala – Readers
FlexPass Arch WallSwitch Reader
The FlexPass Arch WallSwitch Reader is ideal for indoor and outdoor locations. Operating from an input voltage of 4-16 VDC,
the maximum read range is up to 127 mm using FlexCard® standard cards.
Image
Part Number
Description
654-2311-100
Arch WallSwitch Reader – 26bit
654-2311-200
Arch WallSwitch Reader
– 32bit AC4+4
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
114 mm x
76 mm x
20 mm
4-16
VDC
at reader
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
139 g
Black
654-2311-300
Arch WallSwitch Reader
– 32bit I/NET
654-2311-400
Arch WallSwitch Reader – 37bit
654-2312-100
Arch WallSwitch Reader – 26bit
654-2312-200
Arch WallSwitch Reader
– 32bit AC4+4
Grey
654-2312-300
Arch WallSwitch Reader
– 32bit I/NET
654-2312-400
Arch WallSwitch Reader – 37bit
654-2313-100
Arch WallSwitch Reader
– 26bit
654-2313-200
Arch WallSwitch Reader
– 32bit AC4+4
Beige
654-2313-300
Arch WallSwitch Reader
– 32bit I/NET
654-2313-400
Arch WallSwitch Reader – 37bit
Electronic Access Control Catalogue – Proximity Technology – Indala – Readers
27
FlexPass Wave WallSwitch Reader
The FlexPass Wave WallSwitch Reader is ideal for indoor and outdoor locations. Operating from an input voltage of 4-16 VDC,
the maximum read range is up to 127 mm using FlexCard® standard cards.
Image
Part Number
Description
654-2310-100
Wave WallSwitch Reader
– 26 bit
654-2310-300
Wave WallSwitch Reader
– 32 bit I/NET
654-2310-400
Wave WallSwitch Reader
– 37 bit
Colour
Black
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
140 mm x
84 mm x
28 mm
4-16
VDC
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
170 g
FlexPass Arch Mid-Range Reader
The FlexPass Arch Mid-Range Reader is ideal for applications with heavy traffic. Its design provides easy installation on any
surface, including metal without reducing read range. Operating from an input voltage of 4-16VDC, the maximum read range
is up to 305 mm using FlexCard® standard cards.
Image
Part Number
Description
654-2314-100
Arch Mid-Range Reader – 26 bit
654-2314-200
Arch Mid-Range Reader
– 32 bit AC4+4
654-2314-300
Arch Mid-Range Reader
– 32 bit I/NET
654-2314-400
Arch Mid-Range Reader – 37 bit
654-2315-100
Arch Mid-Range Reader – 26 bit
654-2315-200
Arch Mid-Range – 32 bit AC4+4
654-2315-300
Arch Mid-Range – 32 bit I/NET
654-2315-400
Arch Mid-Range Reader – 37 bit
654-2316-100
Arch Mid-Range Reader – 26 bit
654-2316-200
Arch Mid-Range Reader
– 32 bit AC4+4
654-2316-300
Arch Mid-Range Reader
– 32 bit I/NET
654-2316-400
Arch Mid-Range – 37 bit
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
130 mm x
155 mm x
28 mm
4-16
VDC
140 mA
@ 12 VDC;
82 mA
@ 5 VDC
393 g
Black
Grey
Beige
28
Electronic Access Control Catalogue – Proximity Technology – Indala – Readers
FlexPass Wave Mid-Range Reader
The FlexPass Wave Mid-Range Reader is ideal for applications with heavy traffic. Its design provides easy installation on any
surface, including metal without reducing read range. Operating from an input voltage of 4-16VDC, the maximum read range
is up to 305 mm using FlexCard® standard cards.
Image
Part Number
Description
Colour
654-2323-100
Wave Mid-Range Reader
– 26 bit
Black
654-2323-300
Wave Mid-Range Reader
– 32 bit I/NET
Black
654-2323-400
Wave Mid-Range Reader
– 37 bit
Black
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
140 mm x
163 mm x
35 mm
4-14
VDC
140 mA
@ 12 VDC;
82 mA
@ 5 VDC
393 g
Electronic Access Control Catalogue – Proximity Technology – Indala – Readers
29
FlexPass KeyPad Reader
The FlexPass KeyPad Reader combines both a proximity reader and a keypad in a small, attractive package for applications
where additional security is required from both an access card and a personal identification number (PIN). Waterproof and vandal
resistant, it is suitable for both indoor and outdoor applications without the need for any additional housing.
Image
Part Number
Description
654-2318-100
KeyPad Reader – 26 bit
8 bit burst
654-2318-200
KeyPad Reader – 32 bit AC4+4
8 bit burst
654-2318-300
KeyPad Reader – 32 bit I/NET
8 bit burst
654-2318-400
KeyPad Reader – 37 bit
8 bit burst
654-2319-100
KeyPad Reader – 26 bit
8 bit burst
654-2319-200
KeyPad Reader – 32 bit AC4+4
8 bit burst
654-2319-300
KeyPad Reader – 32 bit AC4+4
8 bit burst
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Fly Lead
116 mm x
76 mm x
17 mm
4-16
VDC
91 mA
@ 12 VDC
100 mA
@ 5 VDC
473 g
Beige
Black
30
654-2319-400
KeyPad Reader – 37 bit
8 bit burst
654-2320-100
KeyPad Reader – 26 bit
4*3 matrix
654-2320-200
KeyPad Reader – 32 bit AC4+4
4*3 matrix
654-2320-400
KeyPad Reader – 37 bit
4*3 matrix
654-2321-100
KeyPad Reader – 26 bit
4*3 matrix
654-2321-200
KeyPad Reader – 32 bit AC4+4
4*3 matrix
654-2321-400
KeyPad Reader – 37 bit
4*3 matrix
Beige
Black
Electronic Access Control Catalogue – Proximity Technology – Indala – Readers
FlexPass Arch Long-Range Reader
The FlexPass Arch Long-Range Reader is designed for applications requiring maximum read range and is ideal for parking
or physically challenging environments; (ADA requirement). Other uses such as concealment behind or within thick building
materials, take advantage of the readers bi-directional (equally from both sides) read capability, providing both access and egress
from a single reader. Operating from an input voltage of 12-24 VDC, the maximum read range is up to 711 mm using FlexCard®
standard cards.
Image
Part Number
Description
654-2322-100
Arch Long-Range
Reader – 26 bit
654-2322-200
Arch Long-Range
Reader – 32 bit
AC4+4
654-2322-300
Arch Long-Range
Reader – 32 bit
I/NET
654-2322-400
Arch Long-Range
Reader – 37 bit
Colour
Termination
Black
Electronic Access Control Catalogue – Proximity Technology – Indala – Readers
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
284 mm x
284 mm x
46 mm
12-24 VDC
1 A/750 mA
500 g
31
Indala – Cards
Indala’s FlexPass high-quality range of cards and key tags provide a highly secure solution as the access control data is scrambled
on the card and can only be read correctly by a reader with the matching scramble table. The card data is then transmitted by the
reader to the host system in the correct Wiegand, ABA Track II or Serial format. Indala FlexSecur® option goes one step further and
screens out unauthorized cards prior to sending programming data on the host system. The additional verification step enhances
the security of your access system in three ways:
• The entire data field is scrambled prior to programming the card. Therefore, the data on the card cannot be decoded to
determine the actual information on the card.
• The information on the card is locked and only the reader has the key to unlock this scrambled data. By matching the reader key
with the lock, the programming data is translated for the host system. If the two do not match the reader denies the user access,
and does not send the invalid information to the host.
• Readers can be programmed for each site, protecting the end user by making each site unique for readers as well as cards.
FlexPass Adhesive Tag
The FlexPass Adhesive Tag can turn your plastic ID badge into a proximity credential. Effortlessly upgrade from magnetic stripe or
barium ferrite technology, or add prox to your smart card, by attaching the FlexTag™ to your existing card. The FlexTag™ will also
adhere to any non-metallic device, such as a cell phone or PDA, to create an instant proximity badge.
Image
TAC-Part No.
Description
Coding
Dimensions
654-2350-000
FlexPass Adhesive Tag
Unprogrammed
654-2350-100
FlexPass Adhesive Tag
26 bit
654-2350-200
FlexPass Adhesive Tag, AC4+4,
Continuum
32 bit
654-2350-300
FlexPass Adhesive Tag, I/NET
32 bit
654-2350-400
FlexPass Adhesive Tag, Continuum
37 bit
Diameter 33 mm
Thickness 1.8 mm
FlexCard® Standard Card
The FlexCard® Standard proximity card is ideal for applications that require a robust card that is flexible and light. Its vertical design
is well suited for use as a badge, and the FlexCard® can accept a variety of ID badge overlays.
Image
32
TAC-Part No.
Description
Coding
654-2351-100
FlexCard® Std Card
26 bit
654-2351-200
FlexCard® Std Card, AC4+4, Continuum
32 bit
654-2351-300
FlexCard® Std Card, I/NET
32 bit
654-2351-400
FlexCard® Std Card, Continuum
37 bit
Electronic Access Control Catalogue – Proximity Technology – Indala – Cards
Surface
Thickness
Non-Printable
1.8 mm
FlexISO® Imagable Prox Card
The FlexISO® Imagable Proximity Card is a credit card thin access credential, which is ISO 7813 compliant with nominal thickness
of 0.76 mm. The FlexISO® Proximity Card comes with a graphics quality surface on both sides of the card, and has the ability
to contain multiple ID technologies in a single credential. The FlexISO® proximity Card can be combined with a magnetic strip,
Wiegand code strip, bar code, a multitude of smart chips and MIFARE®.
Image
TAC-Part No.
Description
Coding
654-2352-100
FlexISO® Imagable Prox Card
26 bit
654-2352-200
FlexISO® Imagable Prox Card, AC4+4, Continuum
32 bit
654-2352-300
FlexISO® Imagable Prox Card, I/NET
32 bit
654-2352-400
FlexISO® Imagable Prox Card, Continuum
37 bit
654-2353-100
FlexISO® Imagable Prox Card c/w Magnetic stripe
26 bit
654-2353-200
FlexISO® Imagable Prox Card c/w Magnetic stripe,
AC4+4, Continuum
32 bit
654-2353-300
FlexISO® Imagable Prox Card c/w Magnetic stripe,
I/NET
32 bit
654-2354-400
FlexISO® Imagable Prox Card c/w Magnetic stripe,
Continuum
37 bit
Surface
Thickness
Graphics
0.76 mm
FlexKey® Fob
The FlexKey® Fob’s contemporary design enables it to be easily attached to a key ring, badge clip or badge lanyard. Built to
withstand harsh operating environments, FlexKey®’s rugged double-sealed construction also allows for customisation. By adding
a company logo, the FlexKey® is ideally suited for vacation resorts, locker rooms, health spas, apartment buildings, club houses,
as well as commercial office spaces and industrial applications where photo ID’s are not required.
Image
TAC-Part No.
Description
Coding
654-2355-100
FlexKey® Fob
26 bit
654-2355-200
FlexKey® Fob, AC4+4,
Continuum
32 bit
654-2355-300
FlexKey® Fob, I/NET
32 bit
654-2355-400
FlexKey® Fob, Continuum
37 bit
Electronic Access Control Catalogue – Proximity Technology – Indala – Cards
Dimensions
44 mm x 30 mm x
6 mm
33
Idesco – Readers
Idesco access control readers have been developed for reliable and secure access control, data collection and person identification
in various environments. Good performance and robustness ensure functionality even in the harshest environments. These readers
have been added to the TAC EAC portfolio as they offer an aesthetically pleasing style.
Access 7A Reader
The Access 7A Reader can be used in the most demanding surroundings. Its excellent performance and robustness ensures optimal
functionality also in harsh environments. The basic housing is internationally registered and suitable for indoor and outdoor usage
and can be installed directly onto metal surfaces without additional insulation. The Access 7A range of readers makes use of serial
number technology provided in a 26bit format.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3301-000
Access 7A Reader
(Black Lense)
Black
1m Fly Lead
110 mm x
43 mm x
24 mm
24 VDC
(8-30 VDC)
30 mA (50
mA Max.)
244 g
Access 7A Quattro Reader
The square format of the Access 7A Quattro Reader is designed for mounting directly onto any electrical back box. The mounting
unit of the reader is equipped with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant snap-on cover is
placed on the mounting unit. The Access 7A range of readers makes use of serial number technology provided in a 26bit format.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3302-000
Access 7A
Quattro Reader
Black
1m Fly lead
86 mm x
86 mm x
17 mm
24 VDC
(8-30 VDC)
30 mA (50
mA Max.)
315 g
Access 7A PIN Reader
The Access 7A PIN Reader improves security in access control by providing PIN code identification to be used together with an
identification card. The keypad of the reader is based on EMFi foil technology. The EMFi foil senses the pressure changes on the
active key area when pressed. There are no moving parts in the PIN pad, and due to this no maintenance is required. The Access
7A range of readers makes use of serial number technology provided in a 26bit format.
Image
34
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3303-000
Access 7A
PIN Reader
(Black Lens)
Black
1m Fly Lead
138 mm x
44 mm x
24 mm
24 VDC
(8-30 VDC)
30 mA (50
mA max.)
325 g
Electronic Access Control Catalogue – Proximity Technology – Idesco – Readers
Access 8AH Reader
The Access 8AH Reader guarantees that the reader can be used in the most demanding surroundings. Its excellent performance
and robustness ensures optimal functionality also in harsh environments. The Basic housing is internationally registered and
suitable for indoor and outdoor usage and can be installed directly onto metal surfaces without additional insulation. This reader
is compatible with HID cards making it ideal if transition to this style is preferred.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3304-000
Access 8AH Reader
(HID Compatible,
Black Lense)
Black
1m Fly Lead
110 mm x
43 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA Max.
244 g
Access 8AH Quattro Reader
The square format of the Access 8AH Quattro Reader is designed for mounting directly onto any electrical back box.
The mounting unit of the reader is equipped with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant
snap-on cover is placed on the mounting unit. This reader is compatible with HID cards making it ideal if transition to this style
is preferred.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
654-3305-000
Access 8AH
Quattro Reader
(HID Compatible,
Black Lens)
Black
1m Fly Lead
86 mm x
86 mm x
17 mm
24 VDC
(10-30 VDC)
130 mA Max.
315 g
Access 8AH PIN Reader
The Access 8AH PIN Reader improves security in access control by providing PIN code identification to be used together with an
identification card. The keypad of the reader is based on EMFi foil technology. The EMFi foil senses pressure changes on the active
key area when pressed. There are no moving parts in the PIN pad, and due to this no maintenance is required. This reader
is compatible with HID cards making it ideal if transition to this style is preferred.
Image
Part Number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
654-3306-000
Access 8AH PIN Reader
(HID Compatible,
Black Lens), 8bit burst
Wiegand
Black
1m Fly Lead
138 mm x
44 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA Max.
325 g
Electronic Access Control Catalogue – Proximity Technology – Idesco – Readers
35
Idesco – Cards
Idesco offers a wide range of 125 kHz tags and cards. Typical applications for these products include access control, time
and attendance and asset marking.
EM 4102 Card
The EM 4102 PVC Card has good printability with thermal transfer and dye-sublimation printers.
Image
TAC-Part No.
Description
Surface
Thickness
654-3350-000
EM 4102 Card,
Serial Number Format
Graphics
1.4 mm
Coin Tag
The epoxy laminated Coin Tag is easy to fix in a convenient leather key ring.
Image
TAC-Part No.
Description
Dimensions
654-3351-000
Coin Tag – EM 2402 A (4102),
Serial No Format
24 mm x 2 mm
TAC-Part No.
Description
Dimensions
654-3352-000
Leather Coin Tag Key ring,
Serial No Format
63 mm x 35 mm
Leather Coin Tag Key ring
To be used with the 125kHz Coin Tags.
Image
Sail Tag
The Sail Tag key ring is very robust and beautifully designed for everyday use.
Image
36
TAC-Part No.
Description
Dimensions
654-3353-000
Sail Tag – EM 4102,
Serial No Format
55 mm x 30 mm
Electronic Access Control Catalogue – Proximity Technology – Idesco – Cards
Wiegand Swipe
Technology
Wiegand technology is a mature standard and works by embedding small lengths of special
wire into a card. This process offers a medium to high level of security. Wiegand cards take
longer than most to produce, so consideration should be given to this when ordering.
This technology is for legacy systems only and should not be used for new systems.
HID – Readers
As one of the leading manufacturers of Radio Frequency Identification Devices, HID produces a line of Wiegand and proximity
products for access control. Meeting virtually any access control requirements, HID’s range of access cards and readers combine
technology, performance and value. The HID line of Wiegand-effect readers are moulded from rugged high impact plastic to resist
vandals. They are all epoxy potted to seal out moisture, are immune to external magnetic fields, operate in temperatures from
-40°c to 70°c, and are suitable for indoor and outdoor use.
Classic Swipe Reader
The HID Wiegand Classic Swipe is a pass-through reader. It can be back mounted on a vertical surface and the slot may be
orientated upward, downward, facing left or right. It performs well in high volume installations and may be exposed to sun,
rain or snow.
Image
Part Number
Description
Colour
Classic Swipe
Black
654-1201-000
Termination
Terminal Strip
654-1202-000
2m Fly lead
Physical
Dimensions
Power Supply
Current
Requirements
Weight
58 mm x
135 mm x
43 mm
5-12 VDC.
40 mA typical
343 g
Turnstile Reader
The HID Wiegand Turnstile Reader is a pass-through reader. It is usually bottom-mounted on a horizontal surface such as a
turnstile support, but may also be mounted on a wall with the slot aligned vertically. It performs well in high-volume and highwear installations and may be exposed to sun, rain, or snow.
Image
Part Number
654-1203-000
654-1204-000
Description
Turnstile
Reader
Colour
Termination
Physical
Dimensions
Power Supply
Current
Requirements
Weight
2m Fly Lead
45 mm x
178 mm x
45 mm
5-12 VDC
40 mA typical
567 g
Black
Chrome
Electronic Access Control Catalogue – Wiegand Swipe Technology – HID – Readers
37
HID – Cards
These access cards from HID include an embedded Wiegand code strip that provides many possible codes. The cards are laminated
under pressure to become solid vinyl when finished. It is virtually impossible to counterfeit, alter or copy these cards. Any attempt
to reach the code strip destroys the cards. It should be noted that due to the relatively complex manufacturing techniques adopted
for this technology lead times for orders are often 6 to 10 weeks. A minimum order quantity of 100 cards is required.
SensorCard
The SensorCard is a basic vinyl Wiegand-encoded card that is strong and flexible for resistance to breakage, and reliable over
a broad range of temperatures and humidities. Three thicknesses are available: the ISO thin 0.76 mm, standard 0.94 mm and
an external wear 1.2 mm. Please note over time fewer variants of these cards will be available.
Image
TAC-Part No.
Description
Coding
Surface
Thickness
654-1250-000
SensorCard, Wiegand
37 bit
brushed
0.94 mm
654-1251-000
SensorCard,
Wiegand AC4+4,
32 bit
brushed
0.94 mm
654-1252-000
SensorCard, Wiegand
26 bit
brushed
0.94 mm
654-1253-000
SensorCard, Wiegand,
37 bit
graphics
0.76 mm
654-1253-010
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.76 mm
654-1253-020
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.76 mm
654-1253-030
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.76 mm
654-1254-000
SensorCard, Wiegand
37 bit
graphics
0.94 mm
654-1254-010
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.94 mm
654-1255-000
SensorCard, Wiegand
37 bit
graphics
1.2 mm
654-1256-000
SensorCard,
Wiegand AC4+4
32 bit
graphics
0.94 mm
*Please note a minimum order quantity of 500 cards applies for these products. The custom artwork cards are dedicated
to specific customers.
38
Electronic Access Control Catalogue – Wiegand Swipe Technology – HID – Cards
SensorCard II
The SensorCard II combines Wiegand and magnetic strip technology on a single card for multiple applications. Strong and flexible,
the SensorCard II can be supplied with a graphics quality surface for use with all direct image printers and magnetic stripe readers.
Please note over time fewer variants of these cards will be available.
Image
TAC-Part No.
Description
Coding
Surface
Thickness
654-1257-000
SensorCard II, Wiegand,
c/w magnetic stripe
37 bit
brushed
0.76 mm
654-1258-000
SensorCard II, Wiegand,
c/w magnetic stripe
37 bit
graphics
0.76 mm
654-1258-010
SensorCard II, Wiegand,
c/w magnetic stripe,
custom artwork*
37 bit
graphics
0.76 mm
654-1259-000
SensorCard II, Wiegand,
c/w magnetic stripe
26 bit
graphics
0.76 mm
*Please note a minimum order quantity of 500 cards applies for these products. The custom artwork cards are dedicated
to specific customers.
ProxCard Plus
The ProxCard Plus card incorporates a combination of proximity, Wiegand and optional magnetic stripe for multiple applications,
or for transitioning from a primarily Wiegand technology arrangement to HID proximity based system. With all graphics quality
surface as standard the Proxcard Plus is suitable for use with direct image printers, all Wiegand readers and most magnetic stripe
readers. Please note over time fewer variants of these cards will be available.
Image
TAC-Part No.
Description
Coding
Thickness
654-1260-000
ProxCard Plus,
Wiegand / proximity
37 bit
1.20 mm
654-1261-000
ProxCard Plus,
Wiegand / proximity
26 bit
0.94 mm
654-1262-000
ProxCard Plus,
Wiegand / proximity
with magnetic stripe
37 bit
0.94 mm
Electronic Access Control Catalogue – Wiegand Swipe Technology – HID – Cards
39
Magnetic Swipe Technology
Magnetic Stripe technology is the most basic and most traditional form of access
control. Due to higher security needs this technology is becoming less favoured.
The basic operation relies on a magnetic stripe on the back of the card that gets
swiped into a reader. This technology is for legacy systems only and should not
be used for new systems.
Indala – Readers
Magnetic Stripe Readers from Indala bring superior magneto-resistive, read-head technology to the security industry.
This magnetic reader head technology, which is widely employed in the reading of information from high-density magnetic
disk drives, has proven ideal for even the most demanding access control card reader applications.
5000 Series 5 Volt, Mag Stripe Dorado Reader
5000 Series 5 Volt, Mag Stripe Dorado Readers are external, metal housed, swipe card readers configured to read ISO track 2
of a magnetic stripe card. The readers incorporate state of the art heated magneto-resistive read heads, LED indication, and fully
encapsulated electronics, allowing operation in harsh environments.
Image
Part Number
654-2101-000
654-2102-000
Description
5000 Series 5
Volt, Mag Stripe
Dorado Reader
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
3m Fly lead
113 mm x
45 mm x
39 mm
5VDC
45 mA typical
409 g
Black
Chrome
ABA Swipe Reader with Keypad
The ABA Swipe Reader with Keypad offers added security for external use. The heavy-duty metal case with stainless steel keypad
protects against vandalism and external damage, whilst the integral heating element enables operation in harsh temperatures.
The reader reads ISO track 2 and provides a 26 bit Wiegand output.
Image
Part Number
Description
654-2103-000
ABA Swipe Reader
with Keypad –
8 bit burst Wiegand
654-2104-000
ABA Swipe Reader
with Keypad –
4*3 matrix Wiegand
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Grey
Terminal
blocks
137 mm x
90 mm x
47 mm
5 VDC
40-50 mA
typical
1.1 kg
Indala – Cards
Pre-programmed Magnetic Stripe
Indala Pre-programmed Magnetic Stripe cards are for use with the ABA magnetic stripe readers. They are ABA encoded and
include the matching card number on the back for easy identification.
Image
40
TAC-Part No.
Description
Thickness
654-2150-000
Pre-programmed Magnetic Stripe
Credit Card
Electronic Access Control Catalogue – Magnetic Swipe Technology – Indala – Readers/Cards
Appendix
Obsolete Product Table
TAC Part
Number
Old Andover Part Numbers / Obsolete Items
654-1201-000
M01-7000-345
654-1202-000
M01-7000-121
654-1203-000
M01-7000-108
654-1204-000
M01-7000-109
654-1250-000
M01-7001-147
M01-7001-064
M01-7001-046
M01-7001-148
654-1251-000
M01-7001-069
M01-7001-158
M01-7001-160
M01-7001-153
654-1252-000
M01-7001-232
M01-7001-230
M01-7001-234
M01-7001-231
654-1253-000
M01-7001-169
654-1253-010
M01-7001-169CA
654-1253-020
M01-7001-062CA
654-1253-030
M01-7001-062CB
654-1254-000
M01-7001-062
654-1254-010
M01-7001-062CC
654-1255-000
M01-7001-139
654-1256-000
M01-7001-009
654-1257-000
M01-7001-151
654-1258-000
M01-7001-236
654-1258-010
M01-7001-236C
654-1259-000
M01-7001-246
654-1260-000
M01-7001-195
654-1262-000
M01-7001-193
654-1301-000
M01-7000-122
654-1302-000
M01-7000-123
654-1303-000
M01-7000-124
654-1304-000
M01-7000-125
654-1305-000
M01-7000-117
654-1306-000
M01-7000-118
654-1307-000
M01-7000-247
654-1308-000
M01-7000-248
654-1309-000
M01-7000-012
654-1310-000
M01-7000-013
654-1311-000
M01-7000-142
654-1312-000
M01-7000-143
654-1313-000
M01-7000-144
654-1314-000
M01-7000-145
M01-7001-149
M01-7001-150
M01-7001-152
Electronic Access Control Catalogue – Appendix – Obsolete Product Table
41
Obsolete Product Table cont’d:
TAC Part
Number
Old Andover Part Numbers / Obsolete Items
654-1315-000
M01-7000-111
654-1316-000
M01-7000-112
654-1317-000
M01-7000-213
654-1318-000
M01-7000-214
654-1319-000
M01-7000-113
654-1320-000
M01-7000-114
654-1321-000
M01-7000-119
654-1350-000
M01-7001-003
654-1350-100
M01-7001-004
654-1350-400
M01-7001-003
654-1351-000
M01-7001-166
654-1351-100
M01-7001-219
654-1351-400
M01-7001-166
M01-7001-071
654-1352-000
M01-7001-140
M01-7001-141
654-1352-100
M01-7001-141
654-1352-400
M01-7001-140
654-1353-000
M01-7001-140SM
654-1353-400
M01-7001-140SM
654-1354-000
M01-7001-142
654-1354-200
M01-7001-143
654-1354-400
M01-7001-142
654-1355-000
M01-7001-073
654-1355-100
M01-7001-221
654-1355-400
M01-7001-073
654-1356-000
M01-7001-188
654-1356-400
M01-7001-188
654-2101-000
M01-7000-51D2B
654-2102-000
M01-7000-51D2C
654-2103-000
M01-7000-6MW1M
654-2104-000
M01-7000-6MDD1
654-2150-000
MAND-ABA
654-2306-100
M01-7000-171B-26
654-2303-100
M01-7000-140B-26
654-2306-200
M01-7000-171B-32
654-2303-200
M01-7000-140B-32
654-2306-300
IN-FP4511A
654-2303-300
654-2306-400
M01-7000-171B-37
654-2303-400
M01-7000-140B-37
654-2307-100
M01-7000-171G-26
654-2304-100
M01-7000-140G-26
654-2307-200
M01-7000-171G-32
654-2304-200
M01-7000-140G-32
654-2307-300
IN-FP4515A
654-2304-300
654-2307-400
M01-7000-171G-37
654-2304-400
42
M01-7001-004
M01-7001-071
M01-7001-219
M01-7001-143
M01-7001-221
M01-7000-140G-37
Electronic Access Control Catalogue – Appendix – Obsolete Product Table
Obsolete Product Table cont’d:
TAC Part
Number
Old Andover Part Numbers / Obsolete Items
654-2308-100
M01-7000-171T-26
654-2305-100
M01-7000-140T-26
654-2308-200
M01-7000-171T-32
654-2305-200
M01-7000-140T-32
654-2308-300
IN-FP3517A
654-2305-300
IN-FP3516A
654-2308-400
M01-7000-171T-37
654-2305-400
M01-7000-140T-37
654-2309-300
IN-FP1511A
IN-FP1514A
654-2310-300
IN-FP1521A
IN-FP1524A
654-2311-100
M01-7000-173B-26
654-2311-200
M01-7000-173B-32
654-2311-300
IN-FP4521A
654-2311-400
M01-7000-173B-37
654-2312-100
M01-7000-173G-26
654-2312-200
M01-7000-173G-32
654-2312-300
IN-FP4525A
654-2312-400
M01-7000-173G-37
654-2313-100
M01-7000-173T-26
654-2313-200
M01-7000-173T-32
654-2313-300
IN-FP4527A
654-2313-400
M01-7000-173T-37
654-2314-100
M01-7000-200B-26
654-2314-200
M01-7000-200B-32
654-2314-400
M01-7000-200B-37
654-2315-100
M01-7000-200G-26
654-2315-200
M01-7000-200G-32
654-2315-300
IN-FP3235A
654-2315-400
M01-7000-200G-37
654-2316-100
M01-7000-200T-26
654-2316-200
M01-7000-200T-32
654-2316-400
M01-7000-200T-37
654-2317-100
M01-7000-200W-26
654-2318-100
M01-7000-166-26
654-2318-200
M01-7000-166-32
654-2318-300
IN-FP5067B
654-2318-400
M01-7000-166-37
654-2319-100
M01-7000-167-26
654-2319-200
M01-7000-167-32
654-2319-300
IN-FP5061B
654-2319-400
M01-7000-167-37
654-2320-100
M01-7000-211-26
654-2320-200
M01-7000-211-32
IN-FP4517A
IN-FP4516A
IN-FP4526A
Electronic Access Control Catalogue – Appendix – Obsolete Product Table
43
Obsolete Product Table cont’d:
TAC Part
Number
Old Andover Part Numbers / Obsolete Items
654-2320-400
M01-7000-211-37
654-2321-100
M01-7000-212-26
654-2321-200
M01-7000-212-32
654-2321-400
M01-7000-212-37
654-2322-100
M01-7000-223B-26
654-2322-200
M01-7000-223B-32
654-2322-400
M01-7000-223B-37
654-2351-100
M01-7001-092-26
M01-7001-135
654-2351-200
M01-7001-092-32
M01-7001-067
654-2351-300
IN-FPCRD
654-2351-400
M01-7001-092-37
M01-7001-134
654-2352-100
M01-7001-167-26
M01-7001-226
654-2352-200
M01-7001-167-32
654-2352-300
IN-FPISO
654-2352-400
M01-7001-167-37
654-2353-100
M01-7001-168-26
M01-7001-227
654-2353-200
M01-7001-168-32
M01-7001-189
654-2354-400
M01-7001-168-37
654-2355-100
M01-7001-094-26
654-2355-200
M01-7001-094-32
654-2355-300
IN-FPKEY
654-2355-400
M01-7001-094-37
44
M01-7001-136
M01-7001-224
Electronic Access Control Catalogue – Appendix – Obsolete Product Table
Part Number Description
The ten digit part numbering system used for our electronic access control products is built from the following
information blocks. It provides a ready reference to the specification of the item concerned, and helps avoid
errors in order placement.
6 54
Primary Reference used
for all EAC parts
X
X
XX
Technology/Product Type:
1 = Magnetic Stripe
2 = Wiegand Swipe
3 = 125 KHz Proximity
4 = 13.56 MHz Mifare
5 = 13.56 MHz i-Class
9 = Biometrics
XX
X
Readers:
Bit Format
1X = 26 Bit
2X = 32 Bit AC 4+4
Continuum
3X = 32 Bit I/NET
4X = 37 Bit Continuum
5X = 66 Bit I/NET
Cards:
Bit Format/Site Codes:
Sequential Numbering
Supplier reference:
1 = HID
2 = Indala
3 = Idesco
1-49 = Readers
50-99 = Cards
Variant: i.e. colour, wire,
length, termination, etc.
Electronic Access Control Catalogue – Part Number Description
Revision Number
45
Access Control Equipment Order Form
Please fax to +46 8 500 101 96, or email to order@tac.se
Order Number:
Date:
System Integrator:
Client’s Name:
Contact Name:
Contact Name:
Address:
Client’s Address:
Post Code:
Post Code:
Phone:
Phone:
Mobile:
Mobile:
Fax:
Fax:
Project Name/Reference:
Shipping Address:
Post Code:
* TAC Part Number
Description
* Bit Format Required
** Quantity
For Existing Sites, Please provide the following data:
* Site Code:
* Starting Serial Number:
* MIFARE® Sector Number: (default is sector 15) 
Any Special Instructions:
* Mandatory Data. Your order will be delayed without this information
**When ordering cards please make sure minimum order quantity is greater than 100 except where otherwise stated
46
Electronic Access Control Catalogue – Access Control Equipment Order Form
Copyright © 2008, TAC
All brand names, trademarks and registered trademarks
are the property of their respective owners. Information
contained within this document is subject to change without
notice. All rights reserved.
Cat-EAC-Eur
09/2008
Europe / Headquarters
Malmö, Sweden
+46 40 38 68 50
Americas
Dallas, TX
+1 972-323-1111
Asia-Pacific
Singapore
+65 6776 3166
www.tac.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising