Lutron Maestro Wireless MRF2-600M Halogen/Incandescent Dimmer, Maestro Wireless MA-R Companion Dimmer, Wireless Controller User manual

Below you will find brief information for Maestro Wireless MRF2-600M, Maestro Wireless MA-R, Wireless Controller. This manual provides instructions for installing and setting up a Lutron Maestro Wireless Dimmer, including how to connect to a wireless controller. The wireless dimmer features a variety of dimming options, including a smooth transition to preset intensity, delayed fade to off, and a tap button to brighten or dim quickly. Instructions are provided for connecting the dimmer to a variety of lighting fixtures, including single-pole and multi-location circuits. The manual also includes information about the wireless controller, which allows you to control the dimmer from multiple locations. With the Lutron Maestro Wireless dimmer, you can create the perfect ambiance for any room in your home.

PDF Download
Document
Lutron Maestro Wireless MRF2-600M User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Wireless control
  • Smooth dimming
  • Preset intensity
  • Delayed fade to off
  • Tap button
  • Multiple location control
  • Single-pole and multi-location compatible
  • FASS switch
  • Companion dimmer
  • Wireless controller

Frequently asked questions

Connect the green ground wire on the Dimmer to the bare copper or green ground wire in the wallbox. Connect either of the wires removed from the switch to the black screw terminal on the Dimmer. Connect the remaining wire removed from the switch to the brass screw terminal on the Dimmer. Tighten the blue screw terminal on the Dimmer, it is not used in a single-pole circuit.

Press and hold the Dimmer/Switch's Tap Button for approximately 6 seconds. Release the Tap Button once the LED(s) start to blink slowly. Press and hold the Off Button on the Wireless Controller for approximately 6 seconds. The Dimmer/Switch will learn the Wireless Controller when the Dimmer/Switch's LED(s) and load flash 3 times and it will exit Set-Up mode.

The maximum lamp wattage is determined by the efficiency of the transformer, which is typically 70% - 85%. The total VA rating of the transformer(s) shall not exceed the VA rating of the dimmer.
Preparing document for printing…
0%