null  null
www.Beha-Amprobe.com
www.Beha-Amprobe.com
2100 Series Two Pole
Voltage Testers
2100-Alpha | 2100-Beta | 2100-Gamma
The Beha-Amprobe 2100-Alpha, 2100-Beta and 2100-Gamma
are rugged and reliable two pole voltage testers for voltage and
continuity checks. Built tough for use in industrial and commercial
environments, the 2100 Series is safety rated up to CAT III 1000 V
/ CAT IV 600 V and measures voltage range up to 1000 V AC and
1200 V DC (2100-Gamma only). Designed with reinforced components
for dependable performance, the 2100 Series has an ingress protection
degree of IP 64 and is built according to voltage tester standard EN
61243-3:2010 and is GS approved.
2100-Alpha
DUAL RATED
690 V 600 V
2100-Beta
DUAL RATED
690 V 600 V
2100 Series Features
• Automatic AC/DC voltage detection
with polarity indication
• Voltage test up to 1000 V AC /
1200 V DC (2100-Gamma)
• Switchable load and 10 mA or 30 mA
RCD trip test with two push buttons
• Automatic continuity test with visual
(LED)
Torch light
• Single pole test to check phase polarity
• Two pole phase rotation indication
4mm test probe
extension (screwable)
NCV/EF detection
area
GS38 protective
probe caps
LED Panel for:
··Phase rotation indication
··continuity test
··Single-pole phase test
··polarity
··voltage indicator
LCD screen
Push buttons for
switchable load
and RCD trip test
• Robust, double insulated cable with
wear indication shows when the test leads
are excessively worn or damaged and need
replacement
• Torch light / measurement area
illumination for working in poorly lit areas
• Audible indication when detected
voltages above 50 V AC and 120 V DC
• Single-phase voltage detection using
main probe - audible and visual signal when
voltage detected
• Auto power ON/OFF and OFF button
• Non-contact voltage indication/
electric field (NCV/EF) - Non-contact
voltage detection function 100-1000 V
(2100-Gamma).
• Resistance measurement - Measures
and displays resistance up to 1999 ohms
(2100-Gamma).
• IP 64 splash and dust proof
Test probe
protector cover
with accessory
probe and cap
storage
• GS approved, built according to IEC
61243-3:2009, EN 61243-3:2010, DIN VDE
0682-401:2011
• Safety rated CAT IV 600 V / CAT III 690
(CAT III 1000 V 2100-Gamma)
2100-Gamma
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2015 Beha-Amprobe® 13104--eng
www.Beha-Amprobe.com
Two Button Switchable Load/
RCD Trip Test
Long, durable test leads with
wear indicator
Test probe protector cover
with accessory storage
When the two buttons are not pressed the
unit is in high impedance mode, providing
additional safety protection when testing
live power sources, and avoiding accidental
tripping of residual-current devices/earth
leakage circuit breakers (RCD/ELCB).
When the buttons are pressed the unit
is in low impedance mode, eliminating
inaccurate readings as result of ghost
voltage. Additionally, in systems with RCDs
you can press the buttons to intentionally
trip 10 mA or 30 mA RCDs remotely and
determine if they are wired correctly.
Extra-long 1.5 m test leads make testing
fast and convenient. The two pole tester’s
rugged, durable test leads have two layers
of insulation for added durability and
safety. If the inner, contrasting-colored
layer is showing, that’s a sign that the test
leads require replacement.
Store the 4 mm test probe extensions and
GS38 protective probe caps, ensuring you
always have them when needed. The test
probe protector cover tip also helps to
open UK electrical safety outlets.
Quick Guide
Features:
Safety Rating
(overvoltage category)
Voltage Range
2100-Alpha
2100-Beta
2100-Gamma
CAT III 690 / CAT IV 600
CAT III 690 / CAT IV 600
CAT III 1000 / CAT IV 600
12 - 690 V AC/DC
Voltage Indication - LCD
12 - 690 V AC/DC
6 - 1000 V AC / 6 - 1200 V DC
12 - 690 V AC/DC
6 - 1000 V AC, 6 - 1200 V DC
Voltage Indication - LED (12 - 690 V)
•
•
•
Continuity Test
(visual and audible indication)
•
•
•
RCD Trip Test (10 mA or 30 mA)
•
•
•
Single Pole Phase Test
•
•
•
Full Range Polarity Detection
•
•
•
Right
Right
Right/Left
IP 64 Splash and Dust Proof
•
•
•
Torch Light/Measurement
Area Illumination
•
•
•
Double Insulated Cable with
Wear Indication
•
•
•
4 mm Test Probe Extensions (screwable) and
Removable GS38 Protective Probe Caps
•
•
•
•
•
Two Pole Phase Rotation Indication
Data Hold Function
Resistance Measurement and Low
Resistance Indication
•
Non-Contact Voltage Detection
•
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2015 Beha-Amprobe® 13104--eng
2100 Series Specifications
2100-Alpha
2100-Beta
2100-Gamma
Voltage Test
LED voltage range
LED indicator
LED tolerances
LCD voltage range
LCD resolution
LCD tolerance
Frequency range
LED and LCD response time
Acoustic indication
Voltage detection
Polarity detection
Range detection
Current I
(load buttons not activated)
Internal load
(load buttons not activated)
Test current switchable load
(load buttons activated)
Switchable load
(load buttons activated)
Automatic power ON
12... 690 V AC/DC
12... 690 V AC/DC
±12, ±24, 50, 120, 230, 400, 690 V
acc. to EN 61243-3:2010
12... 690 V AC/DC
12... ≥690 V AC/DC
±12, 24, 50, 120, 230, 400, ≥690 V
6...1000 V AC / 6...1200 V DC
1V
± (3% rdg + 3 LSD)
DC, 16 2/3 Hz…400 Hz
<1s
≥50 V AC, ≥120 V DC
Automatic (AC/DC)
Full range
Automatic
≤3.5 mAAC at 1000 VAC /
≤4.5 mADC at 1200 VDC
Approximately 3.5 W at 1000 VAC /
Approximately 5.4 W at 1200 VDC
≤300 mAAC at 1000 VAC /
≤350 mADC at 1200 VDC
Approximately 300 W at 1000 VAC /
Approximately 420 W at 1200 VDC
≤3.5 mA AC/DC at 690 V AC/DC
Approximately 2.4 W at 690 V AC/DC
≤350 mA AC/DC at 690 V AC/DC
Approximately 240 W at 690 V AC/DC
LED: >12 V (activated load buttons)
>24 V (w/o load buttons)
LCD: >12V
LED: >12 V (activated load buttons)
>24 V (w/o load buttons)
LED: >12 V
LCD: > 6V
Trip Test of RCD (earth leakage circuit breaker)
Test current switchable load
(load buttons activated)
>30 mAAC at 230 VAC
Single Pole Phase Test
Voltage range
Frequency range
Acoustic indication
Indication
180…690 VAC against earth
100…1000 VAC against earth
40 Hz…70 Hz
yes
Red LED
Continuity Test (Rx) / Diode Test
Range
Tolerance
Test current
Acoustic indication
Diode test
Indication
Overvoltage protection
Automatic power ON
0….500 kΩ
0% to +50%
<5 μA
yes
yes
Red LED
690 V AC/DC
1000 VAC/1200 VDC
< 500 kΩ
Phase Rotation Indication
Voltage range
Frequency range
Indication
170…1000 V AC phase to phase
40…70 Hz
340…440 V AC phase to phase
47…63 Hz
Red LED
Resistance Measurement (Ω ) / Low Resistance Indication “r“ (2100-Gamma only)
Resistance range on LCD
Resolution
Tolerance
Temperature coefficient
Test current
Low resistance indication
Overvoltage protection
0…1999 Ω
1Ω
± (5% rdg + 10 LSD) at 20°C
± (5 LSD / 10 K)
<30 μA
Acoustic indication <10…50 Ω
690 V AC/DC
1000 VAC/1200 VDC
Voltage range
Frequency range
–
–
Indication
–
100…1000 VAC
50…60 Hz
3 levels shown by LCD segments:
Non-Contact Voltage Indication/Electric Field (NCV/EF)
Data Hold
Data hold
–
only voltage measurement (12...690V AC/DC)
voltage and resistance measurement, NCV
Measurement Area Illumination / Torch Light
Torch light
White LED
General Specifications
Operation time (DT)
Recovery time
Operating temperature
Storage temperature
Humidity
Operating altitude
Safety rating (overvoltage category)
Pollution degree
Protection degree
Safety regulations
Approvals, compliance
Power Supply
Power consumption
Battery lifetime
Dimensions (HxWxD)
Weight
30 s
240 s
-15°C to +55°C
-15°C to +55°C
Max. 95% RH
Up to 2000 m
CAT IV / 600V, CAT III / 690V
CAT IV / 600V, CAT III / 1000V
2
IP 64
IEC 61243-3:2009, EN 61243-3:2010, DIN VDE 0682-401:2011
GS mark from TÜV Rheinland, CE
Battery 2 x 1.5V (AAA/ IEC LR03)
Approximately 60 mA
More than 10000 measurements (<5 s / per measurement)
Approximately 280 x 78 x 35 mm (11.0 x 3.1 x 1.4 in)
Approximately 320 g (0.71 lb)
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2015 Beha-Amprobe® 13104-eng
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement