User manual | Cummins Warranty - Cummins Engines

240339_Base.mpc 2/16/04 12:22 PM Page 2
Cummins
Warranty
Cummins Warranty
for Marine
Generator Sets
240339_Base.mpc 2/16/04 12:22 PM Page 3
Coverage
Product Warranted
This warranty applies to new marine generator sets sold by
Cummins Inc., herein after ‘‘Cummins’’, branded as C Power
and C Safe products and used in marine generator set
applications anywhere in the world where Cummins approved
service is available* and delivered to the first user on or after
January 1, 2006. This warranty excludes all generator sets
branded and sold as Onan or Cummins Power Generation.
The ’Product’ consists of a new Cummins Engine, alternator
and accessories, which are approved and supplied by
Cummins, have a Cummins part number and which are
either fitted by Cummins or a Cummins authorized
distributor.
Base Generator Set Warranty
This warranty covers failures of the Product, under normal
use and service, which result from defects in Cummins
material or factory workmanship (Warrantable Failure).
Coverage begins with the sale of the Engine by Cummins
and continues for one year with unlimited hours. The
Duration commences on either the date of delivery of the
Product to the first end-user, or the date the unit is first
leased, rented or loaned, or when the Product has been
operated for 50 hours, whichever occurs first.
The warranty is valid subject to appropriate usage under the
generator set power rating below:
Prime Power
Engines with this rating are available for an unlimited
number of hours per year in variable load applications.
Variable load is not to exceed a 70 percent average of the
Prime Power rating during any operating period of 250 hours.
Total operating time at 100 percent Prime Power shall not
exceed 500 hours per year.
Equipment Covered by the Base Warranty
The ‘‘Generator Set’’ consists of:
1. The engine and all components mounted on it with a
valid Cummins part number.
2. All items with a Cummins part number mounted on the
Generator Set and/or Generator Set baseframe as
shipped from the producing factory.
3. Cummins supplied Generator set control panel (GCP)
including items shipped loose which are part of the GCP.
Engine Extended Major Components Warranty
The Extended Major Components Warranty applies to
engines other than B and C Series used in Cummins
branded generator sets. It covers Warrantable Failures of the
engine cylinder block, camshaft, crankshaft and connecting
rods (Covered Parts). Bushing and bearing failures are not
covered. This coverage begins with the expiration of the
Base Generator Set Warranty and ends after three years or
10,800 hours of operation, whichever occurs first, from the
date of delivery to the first end-user, or the date the unit is
first leased, rented, or loaned, or when the Product has been
operated for 50 hours, whichever occurs first.
Consumer Products
This warranty on Consumer Products in the United States is
a limited warranty. CUMMINS IS NOT RESPONSIBLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Any
implied warranties applicable to Consumer Products
terminate concurrently with the expiration of the express
warranties applicable to the Product. In the United States,
some states do not allow the exclusion of incidental or
consequential damages, or limitations on how long an
implied warranty lasts, so the limitations or exclusions herein
may not apply to you.
These warranties are made to all Owners in the chain of
distribution and Coverage continues to all subsequent
Owners until the end of the periods of Coverage.
Cummins
Responsibilities
During Base Generator Set Warranty
Cummins will pay for all parts and labor needed to repair the
damage to the Product resulting from a Warrantable Failure
when performed during normal business hours. All labor
costs will be paid in accordance with Cummins published
Standard Repair Time guidelines. When it is necessary for
mechanics to make on-site warranty repairs, Cummins will
cover reasonable travel expenses, including meals, mileage
and lodging, for mechanics to travel to and from the repair
dock. Cummins will pay for the lubricating oil, antifreeze,
filter elements, and other maintenance items that are not
reusable due to the Warrantable Failure. Cummins will pay
for reasonable labor costs for Generator Set removal and
reinstallation when necessary to repair a Warrantable Failure.
During the Engine Extended Major Components
Warranty
Cummins will pay for the repair or, at its option, replacement
of the defective Covered Part and any Covered Part
damaged by a Warrantable Failure of the defective Covered
Part.
Owner
Responsibilities
During Base Generator Set Warranty
Owner is responsible for the cost of lubricating oil, antifreeze,
filter elements, and other maintenance items replaced during
warranty repairs unless such items are not reusable due to
the Warrantable Failure.
During the Engine Extended Major Components
Warranty
Owner is responsible for the cost of all labor needed to
repair the Engine, including the labor cost for Engine
240339_Base.mpc 2/16/04 12:22 PM Page 4
removal and reinstallation. When Cummins elects to repair a
part instead of replacing it, the Owner is not responsible for
the labor needed to repair the part. Owner is responsible for
the cost of all parts required for the repair except for the
defective Covered Part and any Covered Part damaged by a
Warrantable Failure of the defective Part. Owner is
responsible for the cost of lubricating oil, antifreeze, filter
elements and other maintenance items replaced during
repair of a Warrantable Failure.
During the Base Generator Set and Engine
Extended Major Components Warranties
Owner is responsible for the operation and maintenance of
the Product as specified in the applicable Cummins
Operation and Maintenance Manual including the provision
of Cummins approved fuels, oils and coolant. Owner is also
responsible for providing proof that all recommended
maintenance has been performed.
Before the expiration of the applicable warranty, Owner must
notify a Cummins distributor, authorized dealer, or other
repair location approved by Cummins of any Warrantable
Failure and make the Generator Set available for repair by
such facility. Locations in the United States and Canada are
listed in the Cummins U. S. and Canada Sales and Service
Directory; other locations are listed in the Cummins
International Sales and Service Directory.
In the event of any Product failure, Owner is responsible for
the cost of towing the boat to the repair dock and for all
associated docking and harbor charges.
Owner is responsible for communication expenses, meals,
lodging, and similar costs incurred as a result of a
Warrantable Failure.
Owner is responsible for maintaining the Engine hourmeter
in good working order at all times and ensuring that the
hourmeter accurately reflects the total hours of operation of
the Product. Owner is responsible for the costs to investigate
complaints, unless the problem is caused by a defect in
Cummins material or factory workmanship. Owner is
responsible for non-Engine repairs, ‘‘downtime’’ expensed,
cargo damage, fines, all applicable taxes, all business costs,
and other losses resulting from a Warrantable Failure.
CUMMINS RIGHT TO FAILED COMPONENTS
Failed components claimed under warranty remain the
property of Cummins Inc. Cummins has the right to reclaim
any failed component that has been replaced under warranty.
Cummins Inc. reserves the right to interrogate Electronic
Control Module (ECM) data for purposes of failure analysis.
Emission
Warranty
Products Warranted
This Emission Warranty applies to new Engines sold by
Cummins that are used in the United States** in marine
propulsion and marine auxiliary applications and that are
required by United States CFR 94.1107 to have an Emission
Warranty. This Warranty applies to Engines built on or after
January 1, 2004 that are certified to CFR 94.1107.
Coverage
Cummins warrants to the ultimate purchaser and each
subsequent purchaser that the Engine is designed, built and
equipped so as to conform at the time of sale by Cummins,
with all United States Federal emission regulations
applicable at the time of manufacture and that it is free from
defects in material or factory workmanship which would
cause it not to meet these regulations within the longer of
the following periods: (A) Five years or 5,000 hours of
operation, whichever occurs first, as measured from the date
of delivery of the engine to the first user, or the date the unit
is first leased, rented, or loaned, or when the Engine has
been operated for 50 hours, whichever occurs first, or (B)
The Base Engine Warranty.
Limitations
Cummins is not responsible for failures or damage resulting
from what Cummins determines to be abuse or neglect,
including, but not limited to: operation without adequate
coolants or lubricants; overfueling; overspeeding; lack of
maintenance of cooling, lubrication or intake systems;
improper storage, starting, warm-up, run-in or shutdown
practices; unauthorized modifications to the Engine.
Cummins is also not responsible for failures caused by
incorrect oil or fuel or by water, dirt or other contaminants in
the fuel or oil. Cummins is not responsible for failures
resulting from:
1. Use or application of the Product inconsistent with its
rating designation set forth above.
2. Incorrect Installation.
Before a claim for excessive oil consumption will be
considered, Owner must submit adequate documentation to
show that oil consumption exceeds Cummins published
standards. Cummins is not responsible for failures of
maintenance components supplied by Cummins beyond 90
days after the coverage duration start date. Maintenance
components include, but are not limited to: sea water pump
impellers; zinc plugs; oil filters; fuel filters; air-filters; water
filters; fuel/water separator filters; expansion tank pressure
caps. Failures of belts and hoses supplied by Cummins are
not covered beyond 90 days after the date of delivery of the
Product to; the first user, or the date the unit is first leased,
rented or loaned, or when the Product has been operated for
50 hours, whichever occurs first. Except for the accessories
noted previously, Cummins does not warrant accessories
which bear the name of another company.
Parts used in warranty repairs may be new Cummins parts,
Cummins approved rebuilt parts, or repaired parts. Cummins
is not responsible for failures resulting from the use of parts
not supplied by Cummins.
A new Cummins or Cummins-approved rebuilt part used to
replace a Warranted Part assumes the identity of the
Warranted Part it replaces and is entitled to the remaining
coverage thereunder.
240339_Base.mpc 2/16/04 12:22 PM Page 1
CUMMINS DOES NOT COVER WEAR OR WEAROUT OF
COVERED PARTS. CUMMINS IS NOT RESPONSIBLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. THESE
WARRANTIES SET FORTH HEREIN ARE THE SOLE
WARRANTIES MADE BY CUMMINS IN REGARD TO THESE
GENERATOR SETS. CUMMINS MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, OR OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
In the United States** and Canada, this warranty gives you
specific legal rights. You may also have other rights which
vary from state to state.
Outside the United States** and Canada, in case of
consumer sales, in some countries the Owner has statutory
rights which cannot be affected or limited by the terms of
this warranty.
Nothing in this warranty excludes or restricts any contractual
rights the Owner may have against third parties.
* Locations in the United States and Canada are listed in the
Cummins United States and Canada Sales and Service
Directory; other locations are listed in the Cummins
International Sales and Service Directory.
** United States includes American Samoa, the
Commonwealth of Northern Mariana Islands, Guam, Puerto
Rico, and the U. S. Virgin Islands.
Cummins Inc.
4500 Leeds Avenue - Suite 301
Charleston, SC 29405
U.S.A.
Bulletin 4082004
Printed in U.S.A. Rev. 9/06
姝2006 Cummins Inc.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project