Tanium Interact User Guide

PDF

Dokument

Reklama

Tanium Interact™ User Guide

Version 1.0.0

August 24, 2017

The information in this document is subject to change without notice. Further, the information provided in this document is provided “as is” and is believed to be accurate, but is presented without any warranty of any kind, express or implied, except as provided in Tanium’s customer sales terms and conditions. Unless so otherwise provided, Tanium assumes no liability whatsoever, and in no event shall Tanium or its suppliers be liable for any indirect, special, consequential, or incidental damages, including without limitation, lost profits or loss or damage to data arising out of the use or inability to use this document, even if Tanium Inc.

has been advised of the possibility of such damages.

Any IP addresses used in this document are not intended to be actual addresses. Any examples, command display output, network topology diagrams, and other figures included in this document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

Please visit https://docs.tanium.com for the most current Tanium product documentation.

Tanium is a trademark of Tanium, Inc. in the U.S. and other countries. Third-party trademarks mentioned are the property of their respective owners.

Overview

Getting started

Asking questions

What is a question?

What is a sensor?

Questions with multiple sensors

Questions with parameterized sensors

Questions with filters

Using the Question Builder

Question expiration

Question History

Using the results grid

Enabling/disabling live updates

Managing rows and columns

Filter results

Sort results and select columns to view

Viewing charts

Exporting and copying results

Working with saved questions

Page 3

Using saved questions

Issue and manage saved questions

Current / Recent zoom

Saving questions

Create a saved question

Working with dashboards

Manage dashboards

Issue saved questions from a dashboard

Create a dashboard

Reorder the saved questions in a dashboard

Export the dashboards configuration

Working with categories

Manage categories

Issue saved questions from a category

Create a category

Reorder categories

Use favorites

Export the categories configuration

Reference: Example questions

Example starter questions

How can I get a list of running services or be able to single out a specific endpoint?

How can I get a list of running processes or be able to single out a specific endpoint?

How can I display Registry keys and values?

How can I get a list of open ports?

How can I get user authentication information?

How can I see the current logged on user?

How can I see when users last logged in?

How can I get the Service Account Logons?

How can I get certificate information?

How can I detect all running Oracle instances within our Linux environment?

How can I get asset information?

Example dashboard questions

Security > Data Leakage

Security > Wireless Network Security

Security > Proactive Security

Security > Workstation USB Write Protection

Change log

Overview

This guide describes how to use Tanium Interact™ (Interact). Interact is the user interface for asking questions and reviewing results.

Interact is installed automatically during the Tanium Server installation. Although it is licensed as part of the core platform, Interact is a Tanium solution module, so it can be updated separately from the Tanium Console and the Tanium Server.

You use Interact to: l

Ask dynamic questions

A question is a message sent to Tanium Clients requesting real-time data from its sensors. Aggregate counts are reported in the results grid.

Examine results and take action

From the results grid, you can drill down to target specific computers and use the deploy action workflow to schedule actions to be executed on the Tanium Client host computer.

Use the saved questions collection and create new ones

A saved question is a configuration object that contains question syntax and question settings. In the Tanium Console, when you click a saved question, the question is issued to Tanium Clients. Saving the question syntax as a configuration object enables it to be reissued later. The configuration object can also be used throughout the platform, both by Tanium solution modules and by user-developed applications that use the SOAP API. For example, you can use Tanium Connect™ to configure a saved question to be run on a schedule with results sent to an external server.

Review and manage dashboards

A dashboard is an organized group of saved questions. You can manage the set of saved questions contained in the group and apply computer group filters to the group.

Review and manage categories

A category is an organized group of dashboards. You can manage the set of dashboards contained in the group and apply user group permissions to view the category object.

An essential set of saved questions, dashboards, and categories is created when the Initial

Content packs are imported during the Tanium Server installation. Additional saved

questions, dashboards, and categories are created when you import additional Tanium content packs and Tanium solution modules.

When you get started with Interact, review the Initial Content so that you are aware of the configuration objects that are already available to you. Reviewing the Initial Content can also help you become familiar with the kinds of questions that can be asked, as well as ways of grouping them that can facilitate reporting and administration tasks. Once you understand how these configuration objects can be used, you will be better prepared to create your own when necessary.

Getting started

1. Learn about questions and ask a dynamic question. See

Asking questions on page 9 .

2. Learn about results and use results grid features to understand results and pivot from them to action. See

Using the results grid on page 21 .

3. Review saved questions and issue them. See

Working with saved questions on page

4. Review dashboards and issue a saved question from the dashboards page. See

Working with dashboards on page 49 .

5. Review categories and issue a saved question from the categories page. See

Working with categories on page 55 .

Asking questions

In Tanium, asking questions is a fundamental interaction with endpoints.

What is a question?

Tanium questions help you get key pieces of information from managed enterprise endpoints.

The Ask a Question feature is built on a natural language parser that enables you to get started with natural questions rather than a specialized query language. You do not need to enter questions as complete sentences or particularly well formed inquiries. Word forms are not case sensitive and can even include misspellings. The parser interprets your input and suggests a number of valid queries that you can use to formalize the question that is sent to Tanium Clients.

The following figure shows an example of how natural language input is parsed into proposed queries. First, the user enters the fragment dns server and clicks Search. In response, Interact returns a list of queries cast in valid syntax.

Figure 1: Natural language parser

Basic questions include: l one or more sensor names in the get clause.

l all machines (in other words, all Tanium Client host computers) in the from clause.

Advanced questions include filter clauses and parameterized sensors.

What is a sensor?

In essence, a sensor is a script that is executed on an endpoint to compute a response to a

Tanium question. Sensors are distributed to clients during registration. Sensors enable you to ask questions about: l

Hardware/software inventory and configuration l

Running applications and processes l

Files and directories l

Network connections

The Initial Content that is imported during the Tanium Server installation includes sensors to support a wide range of common questions. Additional sensors may be added when you import additional Tanium content packs and Tanium solution modules. If you cannot find a sensor you need within Tanium-provided content, you can create user-defined sensors.

For more information, see Sensors .

Questions with multiple sensors

Use the

AND operator in the get clause to specify multiple sensors. Results are grouped by the first sensor, then by the next sensor, and so on. The following example shows a question that uses multiple sensors.

Figure 2: Question with multiple sensors

Questions with parameterized sensors

A parameterized sensor accepts a value specified at the time the question is asked. The following example shows the File Exists sensor. The parser prompts you to specify a file path and file name.

Figure 3: File Exists parameterized sensor

Another example is the High CPU Processes sensor. You can specify a parameter that is the number of CPU processes to return from each machine. Let's say you want to get the top 5 highest CPU utilizing processes. The question has the following syntax:

Get High CPU Process[5] from all machines

For sensors with multiple parameters, you can pass an ordered list separated by a comma.

For example, if you want to get the results of Tanium Action Log number 1 and get 10 lines of results, specify a parameter list as shown in the following example:

Get Tanium Action Log[1,10] from all machines

Note: If you create a saved question based on a parameterized sensor, and then modify the sensor, the saved question will behave as originally designed until the saved question is modified. Then it will behave as expected with the new sensor definition.

Questions with filters

You can use filters to craft questions that target fewer computers than "all machines". You often want to work with a set of computers that have a specific process name or value.

This is an example of an advanced question. The left side is a complete and valid query; the right side contains a filter—the "with" expression. The filter expression on the right side must evaluate to a Boolean true or false. For example, the expression with Running

Processes containing "trillian.exe" evaluates to true if the specified string matches the result string, or false if it does not.

A parameterized sensor like File Exists[] returns "File Exists: Filename" or "File does not exist", so you must be careful how you cast it in a filter expression.

Figure 4: Example: Question with parameterized sensor

The filter expression with File Exists[c:\a.txt] containing "Exists" evaluates to true when the result is "File Exists: c:\a.txt" and false when the result is "File does not exist", so it can be used to filter the set of responses.

Figure 5: Example: Filter with parameterized sensor

The filter is the first part of a question that gets processed by the endpoint. If the endpoint data does not match the filter, then the endpoint does not process the question any further. If there are multiple filters, each filter is processed and evaluated. If the evaluation is true, then the sensors on the left side of the question are also executed and returned.

Filter expressions can match strings or regular expressions. The following table describes the operators supported in filter clauses.

Filter Usage

contains or

Sensor value contains the specified string.

Example: running processes contains "trillian.exe" containing does not contain Sensor value does not contain the specified string.

starts with Sensor value starts with the specified string.

Example: starts with "tril"

Sensor value does not start with the specified string.

does not start with ends with Sensor value ends with the specified string.

Example: starts with "lian.exe" does not end with Sensor value does not end with the specified string.

matches Sensor value matches the specified regular expression (in Boost syntax ).

does not match is equal to is not equal to

Sensor value does not match the specified regular expression.

Sensor value is equal to the specified value or string. You can also use an equals sign (=) or the word is

Sensor value is not equal to the specified value or string. You can also use a negated equals sign (!=).

is less than is less than or equal to is greater than is greater than or equal to

Sensor value is less than the specified value.

Example: application version[chrome.exe] < 12

Sensor value is less than or equal to the specified string.

Example: application version[chrome.exe] <= 12

Sensor value is greater than the specified value.

Example: application version[chrome.exe] > 12

Sensor value is greater than or equal to the specified string.

Example: application version[chrome.exe] >= 12

Using the Question Builder

The Question Builder is another way to create a question. It has form fields to help you complete the get clause, the from clause, and optional filters.

You can launch the Question Builder in either of the following ways: l

In the Ask a Question box, click Question Builder in the top right corner.

After you have asked a question and want to refine it, click Copy to Question Builder.

The following figure shows the Question Builder.

Figure 6: Question Builder

The first text box is for sensor names. Start typing and then use the typeaheads to select sensors.

Figure 7: Typeaheads

Alternatively, you can use the Browse Sensors dialog box to select sensors. When you use the dialog box, you can review sensor descriptions.

Figure 8: Browse sensors

The following table provides guidelines for Advanced Sensor Options.

Settings

Case Sensitivity

Guidelines

l l

Ignore case

Group and count result values regardless of differences in upper-case and lower-case characters.

Match case

Group and count result values with strict attention to lettercase.

Settings

Matching

Treat Data As

Maximum Data

Age

Guidelines

l l

Match Any Value

Any value in the answer must match the value specified in the question.

Match All Values

All values in the answer must match the value specified in the question.

For some sensors, a Tanium Client might compute multiple results. For example, in response to the IP Address sensor, it is possible for a Tanium

Client to return both an IPv4 address and an IPv6 address. A question based on the IP Address sensor containing

192.168

for example could possibly match the IPv4 address but not the IPv6 address. In this case, you probably want to match "any".

Sensor values are treated as the type of data you specify: l l l l l l l l l

Date/Time (BES)

Date/Time (WMI)

File Size

Integer

IP Address

Numeric

Text

Time Duration

Version

Maximum time the Tanium Client may use a cached result to answer a question.

For example, by default, the maximum data age for the File Size sensor is 15 minutes. When a Tanium Client is asked a question that executes the File Size sensor, it caches the result. Over the next 15 minutes, if the Tanium Client is asked a question that includes the File Size sensor, it responds with the cached answer.

After 15 minutes, if the Tanium Client is asked a question that includes the File

Size sensor, it executes the sensor script again to compute a fresh answer.

Use shorter ages for sensors that return values subject to change frequently, such as status and utilization sensors. Use longer ages for values that typically change infrequently, such as the chassis type or Active Directory

Domain membership.

Question expiration

When a dynamic or saved question is issued, the question is assigned a question ID. In your web browser, you will notice the question ID in the URL.

Figure 9: Question ID

The question ID "expires" after 10 minutes, and its corresponding URL becomes invalid.

This means that for up to 10 minutes, you can refresh the page or share the link. After 10 minutes, if you navigate to the link, Interact displays a message indicating the question has expired, and it gives you the option to copy the question text to the Question Bar so you can reissue it.

Figure 10: Question Expired message

Question History

Go to Administration > Question History to review a chronology of questions that have been issued. By default, an entry for a question is maintained in the chronology for 7 days.

You can change the default limit with the global setting SOAPQuestionHistoryLimitInDays.

You can use the Question History to review question syntax and the question expiration timestamps. You can also copy the question to the Question Bar or Question Builder.

Using the results grid

In the results grid, an answer row is an aggregation of the computers that responded with the data shown. The Count column shows the number of Tanium Clients with that answer.

Figure 11: Results grid

The grid displays the first 100 answer rows. You can change the number of rows in user preferences. Go to the logged in user link in the upper right corner, and select Preferences to display the configuration page.

Enabling/disabling live updates

As results come in, Live Updates in the results grid toolbar shows the percent of Tanium

Clients that have reported results.

Click the pause button to pause updates to the grid.

Click the play button to resume updates to the grid.

Even when 100% of Tanium Clients have reported, you might see answer rows that seem to indicate incomplete results.

[no results]

Indicates that the Tanium Client was instructed to answer but does not have a value that matches the sensor filter. This can be expected when a filter is applied to the get

clause and not the from clause. For example, if the question is formed with the syntax

Get IP Address ending with 2 from all machines

, all machines would report answers and all machines that did not have IP address ending in 2 would report no results. It is better to put the filter in the from clause. For example,

Get IP Address from all machines where IP Address ends in 2 would not return unexpected "no results" rows. You might also see [no results] if the sensor does not return a value, or the sensor was unable to execute the script.

[Current Result Unavailable]

If it takes the client longer than usual to evaluate a sensor, it might pass "current result unavailable" to its peer. The sensor process continues on the client, and when it is complete, the client sends its updated answer. The results grid is then updated.

[Results Currently Unavailable]

Indicates an answer cannot be parsed correctly by the Tanium Server. If this occurs, contact your technical account manager (TAM).

Managing rows and columns

Filter results

Use the filter controls to display only rows that match the specified criteria.

Filter by Text

Filters the results grid without reissuing the question. Select the Contains or Does

not contain operator, specify a search string, and click the search icon.

Filter by Computer Group

Issue a new question with the added filter. Select from the wildcard groups All

Computers, No Computers, configured computer groups, and the special Ad Hoc

Filter. The Ad Hoc filter is a one-time only filter. The Ad Hoc filter configuration is not saved.

The following example shows filtered results when both a computer group and text filter are applied. Note the computer group filter affects the question shown in the Question bar; the text filter does not.

Figure 12: Filtered results

To create an ad hoc filter:

1. Select Create Ad Hoc Filter from the Filter by Computer Group drop-down list.

Interact displays the Group Builder dialog box.

2. Use one of the tabs to create a filter and then click Apply.

The Filter Bar tab includes a natural language parsing search box that helps you build a valid filter expression.

The Filter Builder tab includes fields that enable you to add a filter, apply it, and issue the resulting question. The question is always

Get computer name and IP address

from all machines with the filter added to the from clause.

The Manual List tab includes fields that enable you to specify a list of computers by hostname or IP address.

Sort results and select columns to view

In column headers, click the menu icon to display the menu for sorting rows and showing/hiding columns.

Figure 13: Grid row/column controls

Click the

Clear Sort

button to clear sorting criteria.

Viewing charts

The results grid is the default view. You can use the View button bar in the upper right corner to toggle to a pie chart or bar chart.

Mouse over a pie slice or bar to display the result string and count. If the result count is less than 3 % of the total, it is included in the Other group.

Figure 14: Pie chart

Figure 15: Bar chart

Exporting and copying results

Use the Copy Table icon to copy the results to the clipboard in text format. This action copies the complete results, not just the results displayed on the results grid.

Use the Export Table icon to export the results to a .csv file. This action exports the complete results, not just the results displayed on the results grid.

Select one or more rows and use the More selector to copy or export only the selected rows.

Merging questions

Results often lead to additional questions. For example, let's say you originally ask for a list of computer names and running processes, and you see results that indicate a suspicious process is running on a few machines. You can merge the question with another to learn more—for example, the last logged-in user. The result of the merge is a results grid with one or more additional columns that have data for the added sensor.

To merge questions:

1. Click Merge in the upper right corner of the results grid toolbar.

Interact displays the Select Merge Questions dialog box.

2. Use one of the tabs to add one or more questions and then click the red Merge button.

The Saved Questions tab includes a list of saved questions for which you have Read

Saved Question permission.

The Create a Question tab includes fields that enable you to start a new question.

The Build a Question tab includes fields that enable you to select sensors for the merge question.

Notice that you add additional sensors to the "get" clause but you do not add filters to the "from" clause. The from clause is built from the rows that were selected on the results grid when you clicked Merge.

Using drill down

From the results grid, you can drill down from selected results to retrieve additional information from the selected endpoints. By adding a drill-down question, you are essentially adding sensor filters. You often will want to do this when you are targeting a narrow group of computers for an action. For example, let's say you originally ask for a list of chassis types and operating systems. You can drill down from these results to the list of computer names for the matching records.

To drill down:

1. Select one or more rows in the results grid. When you select rows, the red Drill Down,

Deploy Action, and More buttons are displayed.

2. Click Drill Down.

Interact displays the Select Drilldown Question dialog box.

The Saved Questions tab includes a list of saved questions for which you have Read

Saved Question permission.

The Create a Question tab includes fields that enable you to start a new question.

The Build a Question tab includes fields that enable you to select sensors for a drilldown question.

3. Select or configure a question you want to use and then click the red Drill Down button.

Interact displays the progression of results, including a new results grid for the drilldown question. From here, you can drill down further, deploy an action, save the

question, or copy it to the Question Bar or Question Builder for further refinement.

Using deploy action

You use filtering, merging, and drill-down techniques to find the set of computers that are due for administrative action. Then, in the results grid, you can select the targeted computers and launch the Deploy Action workflow page.

IMPORTANT: Do not deploy an action unless you completely understand the scope of the action, you understand the impact on an individual target and the impact on the environment given the number of targets, and you have been authorized by your organization to perform the action. Some organizations require review and approval by a second administrator. For information about enabling and using the action approval feature, see Action Approval .

Deploy an action

1. In the results grid, select the rows of interest and click Deploy Action.

Interact displays the Deploy Action workflow page.

2. Use the Deployment Package search box typeaheads to select packages.

Alternatively, you can use the Browse Packages dialog box to review package descriptions and then select them.

3. Complete the Action Details section.

Settings Guidelines

Name

Description

Working with saved questions

The saved question configuration includes question syntax and settings. A saved question can be issued manually or scheduled to be reissued periodically.

Using saved questions

In Interact, the Saved Questions page includes the objects imported with Tanium Initial

Content and other content packs, as well as questions saved by Tanium administrators.

Issue and manage saved questions

From the Interact > Saved Questions page, you can take the following actions: l

Click the hyperlinked name of the question to issue it.

Select the question and copy it to the Question Bar or Question Builder.

Edit or delete the configuration.

Current / Recent zoom

In addition to all of the features of the results grid for dynamic questions, the results grid for saved questions includes a "zoom" option: Current or Recent. Current data includes responses from machines that are currently online. Recent data may include responses from offline machines. The Tanium Server caches client responses for 7 days by default. If a client is not online when a question is issued, but the Tanium Server has a cached value for it, the "recent" cached result can be passed to the results grid.

Figure 16: Current and Recent buttons on the results grid

Saving questions

You can save questions as configuration objects so that you can use a complex question that you created in the same way you use the predefined saved questions.

Create a saved question

1. Use the Question bar to ask a dynamic question.

2. Click Save this question directly under the Question bar.

Interact displays the New Saved Question workflow page.

3. Complete the settings described in the following table.

Settings Guidelines

Name

Restrict this question to only owner and administrators

Specify a configuration name. The name appears in saved question lists that are incorporated into Tanium Console workflows. Observe the existing naming scheme so that you and other administrators can find it easily.

Select to restrict visibility. Use discretion here; if a question is significant only to the author, it need not clutter the saved questions list for everyone.

Settings

Reissue this question every

Guidelines

The saved question is first issued immediately upon saving the configuration. Clients that are online at that time respond with their answers.

You can use the "reissue" option to account for machines that are not currently online but are routinely online within predictable cycles (and even unpredictable times). For example, employee laptops might be offline the moment you save the saved question configuration, but you think you are likely to find them online at least once if you were to check every 8 hours.

When reissue is selected, the saved question is reissued in the background at the interval you specify. For example, if you save the saved question configuration at 9:00 a.m. local time and specify a reissue interval of every 8 hours, the Tanium Server reissues the saved question at 5:00 p.m., 1:00 a.m., 9:00 a.m., and so on. The results are archived. This improves the data quality of "recent" responses displayed in the results grid for machines that are not online when you use

Interact to issue the question.

You can use the Question History to verify that the saved questions are sent according to the reissue interval you have configured.

Specify a number and unit for the reissue interval: Minutes, Hours,

Days.

Note: If you specify a reissue interval of 8 hours, the system reissues the saved question exactly every 8 hours, regardless of time changes due to daylight savings time.

Include in the Select Drilldown Question dialog box Saved Questions tab.

Make this question available for drilldown

Make this question available for merging

Include in the Select Merge Questions dialog box Saved Questions tab.

Settings

Default Tab

Default Grid

Chart Zoom

Guidelines

Specify a default tab:

Question

Grid

Pie

The Default Tab setting is saved as a user preference unless the Use

these as the default for all users setting is selected.

Specify a data period:

Current

Recent

Current data includes responses from machines that are currently online.

Recent data may include responses from offline machines. The Tanium

Server caches client responses for 7 days by default. If a client is not online when a question is issued, but the Tanium Server has a cached value for it, the "recent" cached result can be passed to the results grid.

(You can change the default limit for recent with the global setting

SOAPQuestionHistoryLimitInDays.)

The Default Grid Chart Zoom setting is saved as a user preference unless the Use these as the default for all users setting is selected.

Select this option to make the Default Tab and Default Grid Chart Zoom settings apply to all users who issue this saved question.

Use these as the default preferences for all users

Associated

Actions

Working with dashboards

In Interact, a dashboard is an organized group of saved questions. You use dashboards to quickly locate and use sets of saved questions. You can manage the set of saved questions contained in the dashboard, and you can apply computer group filters.

An essential set of dashboards is created when Initial Content is imported during the

Tanium Server installation. Additional dashboards may be created when you import additional Tanium content packs and Tanium solution modules, and you can create dashboards and manage them to make them useful to your particular organization.

To display the dashboards page, click Dashboards from the Interact home page.

Figure 17: Dashboards page

Manage dashboards

Use the tools shown in the following figure to manage a dashboard configuration object.

Figure 18: Dashboard page tools

Issue saved questions from a dashboard

Use the expander button to show the saved questions within a dashboard. When you click a dashboard, Interact loads the saved questions contained in it. The page navigation uses a hierarchy: (1) category (2) dashboard (3) saved question. You can click a saved question to display its results grid.

Figure 19: Category > dashboard > saved questions list

Create a dashboard

1. Click New Dashboard.

2. Specify a configuration name, set filter and visibility options, and click Add.

The dashboard is added to the page.

3. Specify a configuration name, set filter and visibility options, assign it to a content set, and click Add.

The dashboard is added to the page.

4. Click Add Saved Question to display the Add available Saved Questions to Dashboard selection box. The items are populated from saved questions for which you have read

permission.

5. Select saved questions and click Add.

Note: A new dashboard is added to the Other category by default. This category is visible only to users with the Administrator or Content Administrator role.

Consequently, the dashboard is also visible only to the creator and users with the

Administrator or Content Administrator role. If you do not have one of these roles, and you want the dashboard you have created to be visible to other users who do not have the Administrator or Content Administrator role, ask a user with the required privileges to move the dashboard to another category.

Reorder the saved questions in a dashboard

You can reorder the saved questions contained in a dashboard from the issued question page.

1. Select a saved question in the left pane and move it up or down. You can shift-click to select multiple items.

2. Reorder other saved questions as you like.

3. Click Save.

Export the dashboards configuration

1. Click the Export button in the upper right corner.

Interact displays the Select Dashboards to Export dialog box.

2. Select the configurations you want to export and click Export.

Working with categories

In Interact, a category is an organized group of dashboards. You use categories to quickly locate and use sets of saved questions. You can manage the set of dashboards contained in the category, and you can apply user group permissions.

A set of categories is created when the Initial Content is imported during the Tanium Server installation. Additional categories may be created when you import additional Tanium content packs and Tanium solution modules, and you can create categories that are meaningful to you.

To display the categories page, click Categories from the Interact home page.

Figure 20: Categories page

Manage categories

Use the tools shown in the following figure to manage a category configuration object.

Figure 21: Categories page tools

Note: When a new dashboard is created, it is added to a category named Other

Dashboards. Only a user with the Administrator or Content Administrator role can move a dashboard from Other Dashboards to another category.

Issue saved questions from a category

Use the expander button to show the dashboards within the category and the saved questions within the dashboard. When you click one of the category's dashboards, Interact issues the saved questions contained in it. The page navigation uses a hierarchy: (1) category (2) dashboard (3) saved question. You can click a saved question to display its results grid.

Figure 22: Category > dashboard > saved questions list

Create a category

1. Click New Category.

2. Specify a name and visibility option and click Add.

The category is added to the page.

3. Click Add Dashboard to display the Add available Dashboards to Category selection box. The items are populated from dashboards for which you have read permission.

4. Select dashboards and click Add.

Reorder categories

1. Click the More button in the upper right corner and select Reorder.

Interact displays the Reorder Categories dialog box.

2. Move the categories into your preferred order.

Use favorites

Click the Favorites icon to add the category to your Favorites list. Favorites are saved as a user setting. Your favorites selections do not affect other users.

Export the categories configuration

1. Click the More button in the upper right corner and select Export.

Interact displays the Select Categories to Export dialog box.

2. Select the configurations you want to export and click Export.

Reference: Example questions

This reference provides examples to help you understand the kinds of questions you can ask.

Example starter questions

This section gives examples of common questions.

How can I get a list of running services or be able to single out a specific endpoint?

Get Running Service from all machines

Get Service Details from all machines

Get Running Service from all machines with Computer Name containing

"hostname"

How can I get a list of running processes or be able to single out a specific endpoint?

Get Running Processes from all machines

Get Running Processes from machines where Computer Name contains "hostname"

Get Running Processes and Computer Name contains "hostname" from all machines

How can I display Registry keys and values?

Get Registry Value Data[registry key path, value-name] from all machines

Get Registry Value Data[HKEY_LOCAL_

MACHINE\Software\Microsoft\Windows\CurrentVersion, CommonFilesDir] from all machines

Get Registry Key Value Exists[registry key path, value-name] from all machines

Get Registry Key Exists[HKEY_LOCAL_

MACHINE\Software\Microsoft\Windows\CurrentVersion, CommonFilesDir] from all machines

How can I get a list of open ports?

Get Computer Name and Open Port from all machines

Get Open Port from machines where Computer Name contains "hostname"

Get Open Port from all machines with Computer Name containing "hostname"

How can I get user authentication information?

Get Logged In Users contains "username" from all machines

Get Logged In Users containing "BABOON08D9ANGUI\Administrator" from all machines

Get Logged In Users and Computer Name from all machines

Get Local User Login Dates from all machines

Get Logged In Users and Client Date from all machines

Get Last Logged In User and Client Date from all machines

Get Computer Name and Last Date of Local Administrator Login from all machines with Last Date of Local Administrator Login not containing "no results"

Get Local Administrators from all machines

How can I see the current logged on user?

Get User Sessions from all machines

How can I see when users last logged in?

Get local User Login Dates from all machines

How can I get the Service Account Logons?

Get Service Login Names from all machines

How can I get certificate information?

Get Machine Certificates[authroot] from all machines

Get Machine Certificates[disallowed] from all machines

Get Machine Certificates[root] from all machines

For Intermediate Certs:

Get Machine Certificates[CA] from all machines (Intermediate Certs)

How can I detect all running Oracle instances within our Linux environment?

Get computer name and running processes that contains "ora_pmon" from machines with running processes contains "ora_pmon"

How can I get asset information?

Get Cpu and Cpu Details and Chassis and Architecture and Serial Number and

Computer Name and Bios and IP Address and Mac Address and serial number from all machines

Example dashboard questions

Reviewing the predefined list of saved questions included in dashboards and categories is a good way to learn how to use questions to get meaningful results. A few of these predefined questions are repeated here to illustrate this.

Security > Data Leakage

Get Computer Name and Non-Approved Established Connections from all machines with Non-Approved Established Connections containing ":"

Security > Wireless Network Security

Get Wireless Networks Visible from all machines

Get Hosted Wireless Ad-Hoc Networks from all machines with Hosted Wireless

Ad-Hoc Networks containing "started"

Get Unencrypted Wireless Networks from all machines with Unencrypted

Wireless Networks containing "open"

Get Wireless Networks Using WEP from all machines with Wireless Networks

Using WEP containing "wep"

Security > Proactive Security

Get Firewall Status containing "disabled" from all machines with Firewall

Status containing "disabled"

Get Computer Name and Open Share Details from all machines with Open Share

Details not containing "No shares"

Security > Workstation USB Write Protection

Get USB device details from all machines

Get Computer Name and Username from all machines with ( Operating System not containing "server" and USB Write Protected containing "False" )

Get Computer Name and Username from all machines with ( Operating System not containing "server" and USB Write Protected containing "True" )

Change log

Date

May 4, 2017

May 31, 2017

June 29, 2017

August 24, 2017

Revision Summary

Initial publication.

Revised "Getting Started" topic so it is consistent with the other solution modules.

Revisions to produce HTML versions of 1.1 and 1.0.

Update to reflect changes to capitalization style for user documentation.

Reklama

Tanium Interact™ User Guide

Table of contents

Overview

Getting started

Asking questions

What is a question?

What is a sensor?

Questions with multiple sensors

Questions with parameterized sensors

Questions with filters

Using the Question Builder

Question expiration

Question History

Using the results grid

Enabling/disabling live updates

Managing rows and columns

Filter results

Sort results and select columns to view

Viewing charts

Exporting and copying results

Merging questions

Using drill down

Using deploy action

Deploy an action

Working with saved questions

Using saved questions

Issue and manage saved questions

Current / Recent zoom

Saving questions

Create a saved question

Working with dashboards

Manage dashboards

Issue saved questions from a dashboard

Create a dashboard

Reorder the saved questions in a dashboard

Export the dashboards configuration

Working with categories

Manage categories

Issue saved questions from a category

Create a category

Reorder categories

Use favorites

Export the categories configuration

Reference: Example questions

Example starter questions

How can I get a list of running services or be able to single out a specific endpoint?

How can I get a list of running processes or be able to single out a specific endpoint?

How can I display Registry keys and values?

How can I get a list of open ports?

How can I get user authentication information?

How can I see the current logged on user?

How can I see when users last logged in?

How can I get the Service Account Logons?

How can I get certificate information?

How can I detect all running Oracle instances within our Linux environment?

How can I get asset information?

Example dashboard questions

Security > Data Leakage

Security > Wireless Network Security

Security > Proactive Security

Security > Workstation USB Write Protection

Change log

Powiązane

Tanium Client Deployment Guide

Tanium Patch 2.0.5 User Guide

Tanium Trace User Guide

Tanium Discover User Guide

Tanium Trace User Guide: AI Chat & PDF Access

Tanium Detect User Guide 3.0.5

Tanium Trace User Guide | AI Chat & PDF Download

Tanium Patch User Guide - Version 2.0.4

Tanium Patch User Guide

Intel ITANIUM2 1.0GHZ SKT611 Datasheet

Tanium Integrity Monitor User Guide

ATEN AS8144B Specifications