User manual | null User manual

T
S
N
r
Current
High Setting
Temp Temp
Temp
Temp
Temp
MPRT RF
0
0
2
4
2
4
0
6
2
4
6
6
WIRELESS PROGRAMMABLE THERMOSTAT
MON TUE WED
THU FRI SAT SUN
MON TUE WED
HEAT FRI SAT SUN
THU
USER INSTRUCTIONS
OFF
MAN
MON TUE WED
THU FRI SAT SUNCurrent
H
TIMES
MON TUE WED
THU FRI SAT SUN
Time
Current
Time
MON TUE WED
THU FRI SAT SUN
OKCurrentM
Current
Time
TO ACCEPT & CONTINUE PRESS OK
Current
TO CHANGE VALUE PRESS
OR
Time
ABOUT YOUR MPRT RF
8 10 12 14 16 18 20 22 24
8 10 12 014 216 418 620 822102412 14 16 18 20 22 24
0 122 144 16 618 820 10
8 10
22 12
24 14 16 18 20 22 24
Use
or H H to set
L the “High” temperature.
Your have now set your high temperature.
MM screen returns to normal.
PressOKOK
. The
TO ACCEPT & CONTINUE PRESS OK
The MPRT RF consists of a room unit and a relay box.
TO CHANGE VALUE
H PRESS OR
1 Hr
The ROOM UNIT is programmable a room thermostat.
LL
1 Hrset your “Medium”
To
Htemperature, follow the same procedure as
It measures the temperature of your room and then controls the
above except press
OK
M instead of H .
heating to maintain the room at the chosen temperature.
OK
M
IMPORTANT : Do not place or fit the ROOM UNIT where it will be
1 Hr “Low” temperature,
OKfollow
L
Mthe same procedure as
To set your
High Setting
Setting PRESS OK
&High
CONTINUE
affected by heat from radiators, sunshine,
1 Hr
above except
press TO
instead
of H OR.
LACCEPT
TO
CHANGE VALUE PRESS
1 Hr
or other heat source.
High Setting
L
TO ACCEPT & CONTINUE PRESS TO
OKOK
ACCEPT &
MCONTINUE PRESS OK
TO1 ACCEPT
& CONTINUE PRESS TO
OKACCEPTTime
& CONTINUE PRESS OK
Hr
TO CHANGE VALUE PRESS OR TO CHANGE VALUE PRESS OR
HEAT
HEAT
TIMES
TIMES
TO ACCEPT & CONTINUE PRESS OK
OFFVALUE PRESS
TO CHANGE
OR
OFF
MAN
MAN
HEAT
TIMES
HEAT
TIMES
OFF
MAN
HEAT
TIMES
High Setting
OFF
MAN
OFF
MAN
HEAT
TIMES
OFF
MAN
TO CHANGE VALUE PRESS
OR TO CHANGE VALUE PRESS
OR
HEATING
TIMES
3 SETTING YOUR
1 Hr
L
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESSHigh
OR Setting
RELAY
BOX
ROOM
UNIT
Press
.
HEAT
TIMES
H
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO
OFF CHANGE VALUE PRESS OR
This screen
OK
MAN
appears:
MON TUE WED
THU FRI SAT SUN
MON TUE WED
THU FRI SAT SUN
The relay box is wired to your heating equipment by your
electrician. The room unit communicates with the relay box by
radio waves, thus switching on/off your heating.
If your MPRT RF has already been installed you need only follow
the section ‘THREE EASY STEPS’, to operate your heating.
M
MON TUE WED
THU FRI SAT SUN
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
L
1 Hr
FOR LOW PRESS “L”, FOR
“M”,PRESS
FOR 12
HIGH
PRESS
“H”
FOR
“L”,14
FOR
MEDIUM
0 MEDIUM
2 4 PRESS
6 LOW
8
10
16
18 PRESS
20 22“M”,24FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OKTO ACCEPT & CONTINUE PRESS OK
NOTE:
H
TO ACCEPT & If
CONTINUE
PRESSabove
OK
the screen
appears without
the days of the week displayed it
H
MON TUE WED
means the
room unit has been
set
every
M up to give the same temperatures ever
THU FRI SAT SUN OK
OK
day.0If you
wish
to
change
this
set
up
to
enter
for
individual
days
press
M
2 4 6 8 110
12 014 216 418 620 8221024H12 14 16 18 20 22 24
HrH
L
to exit. Then press
and
together
and hold down for 10 seconds.
1 Hr
L
daily
0 2 4 Press
6 8 10 to12enable
14 HOK
16
18 time
20 settings.
22 24 Press OK toMaccept.
M
Now press
and follow
H the instruction below.
1 Hr
L above process.)
On your room unit you set the value of three temperatures, Low,
M programme each day
(To revertFOR
to OK
the
repeat the
1 Hr same
LOW PRESSL“L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”,HEAT
FOR HIGH PRESS “H”
TIMES
HEAT
TIMES
OFF
MAN
“THREE EASY STEPS”
HEAT
TIMES
OFF
MAN
OFF
MAN
1 Hr
4
6
8 10 12 14 16 18 20 22 24
OFF
MAN
This screen
appears:
HEAT
TIMES
1 Hr
OK
H
Current
M
Temp
Current
Time
TO CHANGEL
VALUE PRESS OR
H
0 2 4 6 8 10 12 14
OK
2
4
M
16 18 20 22 24
H
HEAT
HEAT
TIMES
TIMES
HEAT
HEAT
TIMES
TIMES
0
OFF
OFF
MAN
MAN
OFF
MAN
High Setting
OFF
MAN
2
This screen
OK
appears:M
L
HEAT
TIMES
6
8 10
H2
4
6
8 10
0
2
4
6
8 10
HM
Current
Hr button
M can
L now be used to toggle
The 1OK
Smart-Start between
Temp
active and deactivated.
Low Setting
1 Hr 0
0
2
4
6
24
OFF
MAN
OFF
MAN
TO ACCEPT & CONTINUE PRESS OK
MON TUE WED
THU FRI SAT SUN
0
HEAT OFF
TIMES MAN
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
8 10 12 14 16 18 20 22 24
4
12 function
14 16 18
20 22 enabled
2412 14 and
16 18
20 22
To toggle the Smart-Start
between
disabled,
12
14
16
18
20
22
24
12 14 16 18 20 22 24
hold 1 Hrand
down
H
OK
M L for 10 seconds.
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
6
2
SETUP
UP FOR
SMART-START.
OK
MON
WED
HighTUE
Setting
THU FRI SAT SUN
4
0
SAT SUN
STARTSMART START
SMART
START
SAT SUNthat the
“SMART START” variesSAT
theSUN
start-up
times
toSMART
ensure
build12 14 16 18 20 22 24
ing achieves
temperature
by
the required time.
SAT SUN
SMART
START
The smart start system is continually learning the temperature rise
requirement, delaying the start up of the system, therefore saving
energy during milder weather.
HEAT
TIMES
2
8 10
12 14 16 18 20 22 24
.
0
6
SMART START
HEAT
TIMES
2 SETTING YOUR 3 TEMPERATURES
H
4
SMART START
12 14 16 18 20 22 2412 14 16 18 20 22 24
OFF
MAN
Press
SMART START
SAT SUN
HH
HEAT
TIMES
HEAT
TIMES
OFFOFF
MAN
MAN
10
OFF
MAN
SAT SUN
OK
M
TUE WED
1 Hr
Use
andHH to alter
the blinking text (hours). PressOKOK toMM
LMON
THU FRI SAT SUN
Hr
proceed to minutes
and change using 1 Current
andH . L
H
Time
1and
Hr
PressOKOK toMproceed
to day and change using
. LL
M
1 Hr
H
OK
M
Press OK . M
TO ACCEPT & CONTINUE PRESS OK
1 Hr
L L set and
1 Hr time is now
OK
M
The
the screen
returns
to normal.
TO CHANGE
VALUE PRESS
OR
1 Hr
TO ACCEPT & CONTINUE
PRESS OK
L
1 Hr
L
TO CHANGE VALUE PRESS OR
1 Hr
L
OFF
MAN
OFF
MAN
SMART START
L
If1 Hr
you are not happy
with the temperatures on SAT
anySUN
particular
day,
SAT SUN
SMART START
you can change them. For example, in12the14figure
16 18 below,
20 22 to
24 change
the settings on the left (LLLLLLMHHLL) to those on the right you
would press the button sequence LLLLLMMHHHH
TO ACCEPT & CONTINUE PRESS OK
HEAT
TIMES
OFF
MAN
HEAT
TIMES
HEAT
TIMES
0
MON
WED
HighTUE
Setting
THU FRI SAT SUN
When the daily programme
is enabled, the bar graph shows the
L
temperatures for the 24 hours of Monday. A Low temperature is
0 2 4 6 8 10
0 2 4 6 8 10
indicated by H, a Mid
temperature by , and
a High temperature
0
2
4
6
8
10
12
14
16
20 22
24
by . If you are happy with the temperatures18
entered
for Monday,
press OK . M
H
SAT SUN
SMART START
Tuesday’s temperatures appear.
L 8 10these00temperatures
If1 Hr
you
0 are
2 happy
4 H
6 with
10 OK0 again,
22 44 66 88press
10
2 M4 and
6 so
8
on to Sunday.
6 8 10
0 2 4 6 8 10
L
M screen returns to normal.1 Hr
Press OK . The
OFF
MAN
MON TUE WED THU FRI SAT SUN
Hold down
for 5 seconds.
L
HEAT
TIMES
1 SETTING THE CLOCK
HEAT
TIMES
M
OK
TO ACCEPT & CONTINUE PRESS OK
1 Hr
High Setting
2
OFF
MAN
OFF
HEAT MAN
TIMES
Medium and High. MON TUE WED THU FRI SAT SUN
“Low” is typically a night setting, “Medium”
an afternoon setting,
Current
and “High” a morning and evening setting.Temp
Your room unit will then operate your heating to maintain these
temperature settings.
Follow steps 1 to 3 below.
0
OFF
MAN
HEAT
TIMES
HEAT
TIMES
2
8 10
4
L6
0
SMART
2 4 4SUN
0 0 2 SAT
6 6 8 81010
0 START
2 4
8 10
2
4
0
6
2
4
8 10
6
8 10 12 14 16 18 20 22 24
6
8 10
12 14 16 18 20 22 24
H
OTHER SIMPLE
FUNCTIONS
HEAT
TIMES
OFF
MAN
0
M
OK
ONE HOUR OF HIGH TEMPERATURE.
If you press 1 Hr you will get
L an hour of High heat, irrespective orH
whether your times are set for Low or Mid heat.
If you want to cancel this function you simply press
. OK
M
HEAT
TIMES
OFF
MAN
HH
HEATHEAT
TIMESTIMES
1 Hr
MANUAL OVERRIDE.
L
If you hold
forOK
5OK
seconds,
MM the room unit will go into manual
mode. In this mode there is only one temperature.
Press either1 Hr1 Hr or H toL see
L this temperature change.
Set it to the temperature you require. The thermostat
will continue
H
M at this temperature until you deactivate
to control yourOKheating
manual override by pressing
. OK
M
OFF OFF
MANMAN
HEAT
TIMES
HEAT
TIMES
OFF
MAN
OFF
MAN
L
1 Hr
HEAT
TIMES
H
1 Hr
L
DEACTIVATING YOUR
HEATING:
2
4
6
8 10
0
OFF
MAN
MORE ADVANCED
FUNCTIONS
H
RELAY BOX OPERATION
0
2
4
6
8 10 12 14 16 18 20 22 24
2 Relay
4 Box
6 has
8 10
14 16 18 20 22 24
Once0 your
been12
installed,
PRESS TO ALTER YOUR HEATING TIMES
H PRESS TO ALTER YOUR “HIGH” TEMPERATURE
it becomes part of your heating PRESS
equipment.
BOTH TOGETHER TO SET/VIEW CLOCK
PRESS TO DEACTIVATE HEATING, OR HOLD
operates
automatically.
OK
M PRESS TO ALTER YOUR “MID” TEMPERATURE
FOR 5 It
SECONDS
FOR MANUAL OVERRIDE
OFF
MAN
PRESS FOR 1 HOUR OF HIGH TEMPERATURE
1 Hr
L
RELAY BOX
PRESS TO ALTER YOUR “LOW” TEMPERATURE
REPLACING THE BATTERIES IN YOUR
ROOM UNIT.
Dependant on type and manufacturer the batteries in your MPRT RF
should last approximately 2 years.
When they go low, a battery symbol appears on the LCD screen
telling you to replace the batteries.
H
M
HEAT
TIMES
8 10
Temp
OFF
MAN
OK
6
Current
High Setting
HEAT
TIMES
OFF
MAN
4
HEAT
TIMES
If you press
your
OKheating
M will be deactivated. The screen will
continue to indicate the room temperature but the heating
H will
1 Hr
L
never come on.
To reactivate your heating simply press
. OK
M
Note:
1 Hr the systemLwill have
Provided you deactivate via the MPRT RF,
frost protection at 6°C. If the system is to be left shut down for a
long period over winter, ensure there is sufficient battery life to
maintain protection. .
HEAT
TIMES
2
But Smart-Start is even more intelligent than this. It remembers
how cold it was on the previous mornings. Thus, in Winter it might
start the heating 1 hour before 7a.m. and in Spring start half an
hour before 7a.m. In this way it provides optimum comfort and
energy saving.
Note:
Current
In extreme low temperatures and dependant on your heating
Low Setting the desired temperature
Temp
system capability,
set may not be
reached by the set time. Thus an earlier higher temperature may
need to be set.
KEYPAD LOCKING.
H
HEAT
TIMES
Hold L & OK forM
5 seconds to lock the keypad.
The locked symbol appears
on the screen
.
OK
M
H
1 Hr
No changes
can beL made to the settings.
H
1 Hr
To unlock the screen
hold L & OK forM
5 seconds.
OFF
MAN
1 Hr
OFF
MAN
HEAT
TIMES
HEAT
TIMES
OFF
MAN
OFF
MAN
HEAT
OKTIMES
M
H
PRESS HERE
L
RETURN TO FACTORY SETTINGS
.
1 Hr
1 Hr
Holding
andL OK down
M for 10 seconds returns the H, M and L
temperatures to the values they had when they left the factory.
1 Hr the heating
L times to their factory values.
It also returns
+
OFF
MAN
H
HEAT
TIMES
COPY FUNCTION.
Pressing
andH OK forM
5 seconds when setting your heating
times (step 3), will copy the current day’s times into the next day.
OK1 Hr M
L
H
H
HOLIDAY
FUNCTION.
1 Hr
L
OK puts
Pressing H while holding
room unit
M theOK
M into holiday
H
H
mode. Press
to enter
the number of days you will be away
H on
Hr
OK
M
holidays.
Press
press 1 HrL or H to alter
OK . 1Now
L the room tem-H
M
OK
M
perature you require
while away on holidays. Press OK to accept
M
1 Hr
1L
Hr function can
OK
M pressing
L be cancelled
and exit. The
by
. OK
M
1 Hr
L
1 Hr
L
1 Hr
L
1 Hr
L
SMART-START FUNCTION.
The unit takes three
LR6 AA1.5V
alkaline batteries.
OFF
MAN
HEAT
TIMES
OFF
MAN
HEAT
TIMES
HEAT
TIMES
HEAT
TIMES
OFF
MAN
OFF
MAN
HEAT
TIMES
HEAT
TIMES
OFF
MAN
OFF
MAN
HEAT
TIMES
OFF
MAN
HEAT
TIMES
OFF
MAN
OFF
MAN
HEAT
TIMES
OFF
MAN
The message “SMART START” displayed on the screen indicates
that this function is operating.
Smart-Start works by switching the heat on in advance - so that
the room can warm up. As an example, lets say you get out of bed
at 8am and you want the room to be warm at that time.
Without Smart-Start you must programme your High temperature
for 7am.
With Smart-Start you need only programme your High temperature
for 8am.
Smart-Start will know that you want the room warm at 8am and
bring the heating on before that.
To access the batteries release the cover from the base by pressing
the base at arrow shown above.
The batteries are then visible.
NOTE: Changing the battery in 1 minute or less will retain all your
settings. If it takes longer than 1 minute, you may have to re-enter
your settings.
MYSON CONTROLS
MYSON LTD., EASTERN AVENUE,
TEAM VALLEY, GATESHEAD,
TYNE & WEAR, NE11 0PG
SALES OFFICE No. 0845 402 3434
IN ACCORDANCE WITH OUR POLICY OF CONTINUAL PRODUCT IMPROVEMENT WE
RESERVE THE RIGHT TO AMEND THE SPECIFICATION OF THESE PRODUCTS WITHOUT
PRIOR NOTIFICATION.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project