Version 3.0
Release Notes
March 3, 1997
New in This Release
WinCenter Pro 3.0 includes:
Administrative Tools — The WinCenter Administration program group contains:
Hot Fix Maintenance Tool — This administrator’s tool automates installation of
WinFrame Hot Fixes. The tool also queries NCD’s FTP site and downloads new Hot
Fixes when they are available.
Bootp Configuration Tool — Configures bootp startup for NCD network computers
booted from the WinCenter server.
NIS (Network Information Service) Configuration Tool — Validates users accounts
against an NIS password database, creates NT accounts using NIS information, and
automounts NIS user’s home directories. Version 3.0 includes the ability to use NT
user profiles for NIS accounts.
WinCenter Configuration Tool — This allows an administrator to:
Arrange WinStations into groups.
Manage WinStation default settings.
Manage permitted methods that users and groups can start WinCenter sessions
(XDM, RSH, or telnet).
Balance the processing load or user load within a set of WinCenter servers.
Enable or disable shadowed WinCenter sessions.
Enable or disable encrypted WinCenter sessions.
Set up virtual Windows COM ports for Windows NT access to your network computer’s serial peripheral device.
Universal Desktop Management:
WinCenter Desktop Icon — A tabbed user interface to WinCenter’s features. In the
WinCenter Desktop Icon you see information about WinCenter and also:
Launch remote applications (UNIX, X Windows) that display within the WinCenter desktop.
Start a Window Manager to control remote applications within the WinCenter
Encrypt session data.
Cut and Paste text and graphics between windows.
Shadow other WinCenter sessions for diagnostic purposes.
Adjust audio input and output.
New in This Release
WinCenter WS+ — WinCenter WS+ provides the following capabilities for HP, IBM,
Silicon Graphics, and Sun workstations:
A chooser window for selecting a WinCenter host and starting a WinCenter
Audio support for your workstation.
The ability to use your workstation floppy drive to read and write Windows NT
WinCenter PC Clients — WinCenter PC Clients provide WinCenter access from
personal computers running Windows 3.1, Windows for Workgroups 3.11, Windows
NT 4.0/3.51, or Windows 95. The WinCenter PC clients provide:
A chooser window for selecting a WinCenter host and starting a WinCenter
Audio support for your workstation.
WinCenter servers now report the load and the number of server users in the
WinCenter WS+ and WinCenter PC Client chooser window.
Accelerated MPEG video for NCD HMX network computers is included.
NCD Network Computers Quick Start Support:
Boot Support for Explora and HMX network computers.
Automated minimal installation of NCDware on WinCenter servers.
Support for DHCP, TFTPD, and bootp startup methods.
Minimal WinCenter server configuration and no NCD network computer
configuration needed to boot NCD network computers from WinCenter servers.
Updated InterDrive NT NFS — This optional NFS client is updated to version 2.1.11.
Documentation Updates:
The WinCenter WS+ manual is incorporated in the WinCenter Connect Installation and
User’s Guide.
The WinCenter Connect Installation and User’s Guide contains two parts: one for system
administrators and one for WinCenter users.
WinCenter Installation - Overview
Note WinCenter Connect 3.0 requires WinFrame version 1.6. The version
number is printed on the WinFrame CD, under the CD title.)
• If you are installing WinCenter Connect for the first time, you have
received WinFrame version 1.6 in your package.
• If you are a previous WinCenter user, ensure WinFrame version 1.6 is
installed before you install WinCenter Connect 3.0. To check which
version of WinFrame is currently installed, login to the WinFrame server
and in the Program Manager, choose Help ➙ About Program
Before You Begin
To make WinFrame installation as efficient as possible, make the following preparations:
Assemble This Software
WinCenter WinFrame v1.6 CD
3.5” WinCenter diskettes:
WinFrame Setup Boot Disk, v.1.6
WinFrame Server Setup Disk #2, v.1.6
WinFrame Server Setup Disk #3, v.1.6
WinFrame Base License, v.1.6
Device drivers diskette supplied by the manufacturer of the network adapter card in the
computer you are setting up as a WinFrame server
Assemble This Information
TCP/IP configuration information
Network name for this server
Network address for this server
Gateway to be used, if any
DNS configuration information (if to be used)
Domain name
DNS servers on your network
Subnet mask, if different from the default for the class to which your network belongs
IP addresses for your primary and secondary WINS servers, if any
Name of the domain to which the WinCenter server you are setting up will belong
WinCenter Installation - Overview
The computer name for the WinCenter server you are setting up. This name should match
the TCP/IP network name.
The type of network adapter card installed in the computer that will be your WinCenter
Overview of Installation Process
Installing WinCenter involves performing the following tasks:
1. Install WinFrame version 1.6
See “Installing WinFrame” on page 5 of these release notes.
2. Install WinFrame Service Pack 5.
See Chapter 2, “Installing Service Packs” in the WinCenter Connect Installation and
User’s Guide.
3. Install custom HAL drivers.
If your WinFrame server is a Symmetric Multiprocessor (SMP) machine, see
“Installing Custom HAL Drivers” in these release notes.
4. Install WinCenter Connect.
See Chapter 3, “Installing WinCenter Connect” in the WinCenter Connect Installation
and User's Guide.
5. Install the WinFrame Hot Fixes.
See Chapter 4, “Installing Hot Fixes” in the WinCenter Connect Installation and User’s
6. Install InterDrive NT.
If you purchased WinCenter’s optional NFS component, see Chapter 1 in the
WinCenter InterDrive NT Installation and User's Guide.
7. Install your Windows NT applications.
See “Installing and Using Windows NT Applications” in these release notes.
8. If you have PCs that need WinCenter access, install the WinCenter PC Client.
See Chapter 5, “Installing the WinCenter PC Client” in the WinCenter Connect
Installation and User’s Guide.
9. If you have UNIX workstations that need WinCenter access, install WinCenter WS+.
See Chapter 6, “Installing WinCenter WS+” in the WinCenter Connect Installation and
User's Guide.
Installing WinFrame
WinFrame Installation Steps
The following instructions guide you through a typical installation scenario. At several points
in the process, you have choices that, if exercised, introduce additional or different steps from
those shown below. For in-depth installation instructions, see Chapter 2 of the WinCenter
WinFrame Installation Guide.
Note The status bar at the bottom of WinFrame Installation screens display
shortcut keys to perform various actions. Among these appear the following
• ESC=cancel
Means “Dismiss this screen, and do not apply any of its settings.”
• F3=exit
Means “Abort the installation program altogether.”
Phase 1 of WinFrame Installation
1. If the computer does not have an existing installation of WinFrame, skip to Step 2.
If the computer does have an existing installation of WinFrame, decide whether
you want to simply upgrade it with a newer version, or overwrite it with a fresh
installation (the scenario reflected in these instructions). Upgrading has the
advantage of preserving existing accounts and optional settings. A fresh installation might be appropriate if you suspect the existing installation is corrupted, or
you want to completely revamp it, including the user data.
If you plan to create a fresh installation, or perform any task that could change
WinFrame’s configuration (such as installing new hardware, service packs, or Hot
Fixes), first remove any existing WinFrame licenses. This prevents any users from
logging on to the server while you are re-installing or modifying the operating
a. Start the computer under the existing WinFrame installation.
b. Login as Administrator.
c. In the Program Manager, open the Administrative Tools group.
d. Double click the WinFrame Licensing icon.
e. Select the license(s) listed in the WinFrame Licensing window.
f. Press the Delete key on your keyboard.
Installing WinFrame
g. As instructed by the resulting dialog, insert the WinCenter WinFrame Base
License diskette in the specified floppy drive, then click OK. A warning dialog
h. On the warning dialog, click OK.
i. When the WinFrame Licensing window does not list any licenses, remove the
WinCenter WinFrame Base License diskette from the floppy drive.
For detailed information about installing and removing licenses, see Chapter 2 in the
WinCenter WinFrame Installation Guide.
2. Make sure the computer is turned off. Insert the WinCenter WinFrame Setup Boot
Disk in the floppy drive, then turn on the computer. The WinFrame Setup screen
appears, and the setup program loads files for a couple of minutes.
3. When prompted, insert the WinCenter WinFrame Server Setup Disk #2, then press
Enter. Setup takes a couple of minutes to load these files. Wait for the Welcome to
Setup screen to appear.
4. On the Welcome to Setup screen, press Enter to start installing WinFrame.
5. On setup’s installation method screen, press <C> for Custom Setup. (This ensures
you will be able to configure WinFrame for any type of hardware device your system
may use.)
The next screen offers the following choices:
Press Enter to let the setup program automatically detect your computer’s mass
storage devices. Setup can detect floppy disk controllers and hard disks. (If you
have storage devices not detectable by setup, you will be informed, so you can
specify them manually.) The following steps assume you select this option. Go on
to Step 6.
Press <S> to skip automatic detection and go directly to manually specifying the
mass storage devices. This is an appropriate choice if the computer has SCSI
adapters, CD ROM drives and special disk controllers, because the setup program
cannot detect them automatically. Go to Step 6a.
6. When prompted, insert the WinCenter WinFrame Server Setup Disk #3, then press
Enter. Setup takes about a minute loading device drivers.
The next screen lists the names of mass storage devices setup has detected.
If you do not want to specify any additional mass storage devices, press Enter,
and skip to Step 7.
If the screen displays <none> as the devices found, or if you want to specify additional mass storage devices besides those listed, be sure you have your hardware
manufacturer’s diskette containing the correct device drivers, then do the
a. Press <S>. The WinFrame Server Setup screen appears.
Installing WinFrame
b. Select Other, then press Enter. (The Other choice appears at the bottom of the
list of drivers; use the down arrow key to scroll down to it, if necessary).
c. Remove the WinFrame Server Setup Disk #3 from your floppy drive, insert the
manufacturer’s device driver diskette, then press Enter. The next screen lists
the device drivers found on the manufacturer’s diskette.
d. Using the arrow keys, select a device driver you want to install, then press
Enter. The selected driver is loaded and the screen that lists detected devices
reappears, listing the device whose driver you just installed.
e. If you have other mass storage devices you want your computer to recognize,
go back to Step 6a., and repeat the process. Otherwise, if you are satisfied with
the devices detected, press Enter.
f. Re-insert the WinFrame Server Setup Disk #3 into your floppy drive, then
press Enter.
7. If a version of WinFrame does not reside on the computer, go to Step 8.
If a version of WinFrame does resides on the computer, you are offered the following
Press Enter to upgrade the existing version with the version you are installing,
preserving the configuration settings and user data set up under the previous
Press <N> to install an entirely fresh version of WinFrame.
Make the selection that reflects the decision you made in Step 1, that is, whether to
upgrade an existing installation or to make a fresh installation to overwrite an
existing installation. Upgrading has the advantage of preserving existing accounts
and optional settings. A fresh installation might be appropriate if you suspect the
existing installation is corrupted, or you want to completely revamp it, including the
user data. (The steps below assume you are performing a fresh installation, and have
pressed <N>.)
8. Check the hardware settings currently specified for your computer as displayed on
the screen. If they are incorrect, follow the instructions on the screen to adjust them.
When the description on the screen matches your computer, press Enter.
9. When prompted, select the partition in which to install WinFrame.
If only one partition is listed, press Enter.
If more than one partition is available, use the arrow keys to choose one in which
to install WinFrame, then press Enter. (You can also choose to create or delete partitions from this screen.)
Installing WinFrame
10. When prompted, select the desired file system type (or to leave the current system
intact), then press Enter.
WinFrame supports both FAT and NTFS file systems. FAT is the standard DOS file
system type. NTFS is specific to the NT operating system and provides faster
performance than FAT on NT systems. Note that a FAT file system can be converted
to an NTFS system, but the reverse is not true. If you are unsure about which file
system to choose, select the NTFS file system.
If you choose to change the existing File System, the next screen warns you that this
will format your hard disk (or the partition you selected in Step 9), erasing all of its
existing data; at this point you can choose a different partition if you want.
To proceed with formatting the disk, press <F>. This takes about ten minutes, so you
might use this interval to do something else.
11. When prompted, specify the directory on your hard disk where you want WinFrame
installed. The default is in the WINFRAME directory at the root level of the selected
partition on the hard drive. When satisfied with the location, press Enter.
12. When prompted whether to perform an exhaustive examination of the hard disk(s),
press Esc to skip it.
13. When prompted to insert the WinFrame Server CD ROM, insert the CD labeled
“WinCenter WinFrame v.1.6”, then press Enter.
If you manually specified mass storage device(s) in Step 6, insert the manufacturer’s
device drivers diskette and press Enter.
The setup program copies files from the CD (and the drivers diskette, if present) to
your hard disk. This takes a few minutes. Then a screen informs you that the first
phase of the setup program is complete.
Phase 2 of WinFrame Installation
14. Remove any diskette that is in the floppy drive, then press Enter to restart the
computer. Do NOT respond to any prompts that might appear as the DOS operating
system loads. Wait for the WinFrame Setup screen to be displayed.
15. When prompted, enter your name and company name, then click Continue. On the
following screen, verify that you entered this information correctly and, when
satisfied, click Continue.
16. When prompted, insert the WinCenter WinFrame Base License disk in your floppy
drive, then click OK.
17. When asked for a WinFrame Server Option Pack, click Cancel if you did not purchase
the Server Option Pack. Go to step 18.
If you did purchase the Server Option pack, insert the WinCenter WinFrame Server
Option Pack disk in your floppy drive:
a. In the WinFrame Server Security Role dialog, select Server and click Continue.
Installing WinFrame
b. Click OK.
c. In the Choose Licensing Mode dialog, select the desired method for assigning
licenses and click Continue. Note that we recommend that you choose the Per
Seat licensing mode. The Per Seat licensing mode is often the most economical
one for networks in which clients tend to connect to more than one server.
d. In the Per Server Licensing dialog, select to Agree with the license and click OK.
18. When prompted, type in a name by which to identify this computer in your network,
then click Continue. Verify the name was entered correctly, then click Continue.
19. When prompted, select the language for your region, then click Continue.
20. When prompted to select the tasks to be performed, check the following tasks:
Set Up Only Windows Components You Select
Setup Network.
Be sure all other tasks are unchecked, then click Continue.
(You can set up printers and/or applications later, if you want. To see how, in
WinFrame Books Online, see “Setting Up Applications to Run from Program
Manager” in Chapter 1, and “Creating Printers on a Server” in Chapter 7.)
21. When prompted, choose which optional Windows components to install. By default,
they are all selected.
To install all optional windows component, click Continue.
To install particular components, uncheck the boxes for components you do not
want to install. If you want to choose particular files to install, click the Files
button next to the component. The next screen lists the files for that component
and lets you specify which files to include in the installation. When satisfied with
your choices, click Continue.
22. A sequence of dialogs guides you through the process of setting up your network
a. When prompted to automatically detect the network adapter card in this computer, click Continue.
b. When prompted to use the detected network card, click Continue.
c. When prompted to confirm the network adapter card settings, click Continue.
d. When warned that the network parameters cannot be verified, click OK.
e. Check TCP/IP Transport and uncheck the other protocols (unless your network
setup requires that you use one of the other protocols). Then click Continue.
23. Leave both Gateway Services for Netware and Multiport adapter unchecked. Click
Installing WinFrame
24. Check all the components in the Windows NT TCP/IP Installations Options table.
However, do not check Enable Automatic DHCP Configuration (the check box near
the bottom of the dialog). Click Continue.
25. Leave the SNMP Service Configuration dialog empty and click OK.
26. When warned of password vulnerability under File Transfer Protocol, click Yes to
proceed with the installation.
27. Leave the FTP Service dialog entries unchanged and click OK.
Setup copies a number of files to your hard disk.
Note This takes between 5 and 10 minutes.
28. When prompted if you want Dial-In Support, if you do not have a modem attached
to this computer or if you do not know what type of modem you have connected to
this computer, select No. After installation, you can install Dial-In support using the
Dial-In Setup Wizard found in the Administrative Tools group.
If you do know your type of modem, select Yes. The Dial-In Setup Wizard appears.
Click to highlight the COM port to which the modem is attached and click Next. In
the next screen, click Choose to display a dialog with a list of modem types. Scroll the
list of modem types and click to highlight the type of modem attached to the
computer. Click OK. Click Next, then click Next again, then click Finish.
29. When prompted if you want to install additional network adapters or software:
If you choose to install additional network components, you might be asked to insert
additional disks supplied by the component manufacturer. For information about
completing the options in this Network Settings dialog box, click Help.
If you do not desire to install additional network components, click OK to close the
Network Settings dialog and proceed with the installation.
30. When prompted, enter the correct network information in the TCP/IP Configuration
The information you enter includes:
IP address. This is the IP address for your WinFrame server.
Subnet mask. This is the subnet mask value for your network.
Default gateway. This specifies the IP address of the default gateway (or IP router)
used to forward packets to other networks or subnets. This is the IP address of
your local gateway. This value is required only for nodes on internetworks. If you
don’t enter a value here, IP functionality is limited to the local subnet unless a
route is subsequently specified with the TCP/IP route command.
Primary and secondary WINS servers. To use Windows Internet Name Service
(WINS) as well as name query broadcasts to resolve computer names to IP
Installing WinFrame
addresses, enter the IP addresses for the primary and secondary WINS servers in
these boxes.
If a WINS server address is not entered, TCP/IP uses name query broadcast plus
the local LMHOSTS file to resolve computer names to IP addresses.
For more information about these dialog boxes, see Chapter 4 of the WinFrame
Installation Guide.
If you are using DNS, select the DNS button. Here you need to enter the Host
Name for the server, the DNS Domain Name, and the DNS Search Order. When
all information is correct, click OK to return to the TCP/IP Configuration dialog.
When all information is correct in the TCP/IP Configuration dialog, click OK.
The setup program displays a dialog, informing you that it is starting up the network.
31. When the Domain/Workgroup Settings dialog is displayed, click OK to accept the
default settings. For now, let this computer remain a member of “WORKGROUP”,
and leave Domain blank.
You can join a domain later, if you want to. To see how, in WinFrame Books Online,
see “Changing the Name of a Domain” in Chapter 5.
You see several sets of program groups being created.
32. When the Administrator Account Setup dialog is displayed, enter a password for the
Administrator account in both text entry boxes, then click Continue. Note that the
word, “Administrator” is automatically supplied as the user name for this account.
33. When prompted to setup local users:
To set up a local user now, in the Local Account Setup dialog, supply the user
name, and, optionally, a password in the two password boxes. Then click Continue. This creates a local user account that has Administrator privileges.
You do not have to set up a local account now; you can do so later by means of the
User Manager icon in the Administrative Tools program group.
34. When the Virtual Memory dialog is displayed, accept the recommended size, or
make it larger (but never smaller), then click Continue. This specifies a hard drive
location and size for a paging file used in memory management.
35. In the Date/Time dialog, set the proper date, time and time zone, then click OK.
36. A sequence of dialogs let you test and adjust the display settings:
a. In the Detected Display dialog, click OK.
b. At the lower right of the Display Settings dialog, click Test. You should test even
if you did not change any settings.
c. On the Testing Mode message, click OK. A color test pattern is displayed for
several seconds, then returns you to the dialog. If the appearance of the test
pattern is acceptable, click Yes in the next message box.
Installing WinFrame
d. When prompted to save the current display settings, click OK.
e. On the Display Settings dialog, make any adjustments you want to the display
settings, such as color palette or desktop area. When satisfied with the settings,
click OK.
If you have changed the settings without then testing them, you will be prompted
to test the new settings.
37. On the WinFrame Setup dialog, select No, so that drive letters are not changed.
38. If an error message appears about your floating-point processor, click Yes.
39. When prompted, insert the Base License disk into your floppy drive and click OK.
Winframe installs your base license.
40. Click OK to accept the licenses.
41. Answer No to the request to install another WinFrame License Pack. setup saves your
configuration information. This takes a few minutes.
42. Remove the license diskette and store it in a safe place.
43. Answer Yes to create an emergency repair disk. Label and insert a diskette in the
floppy drive, then click OK. Files required for repair operations are copied to the
diskette. Upon completion, remove the diskette from the floppy drive and store it in a
safe place.
44. When notified that WinFrame Server is now installed, remove the WinCenter
WinFrame CD from the CD drive and store it in a safe place.
45. Click the Restart Computer button to reboot the computer and activate the settings
you made during installation.
46. To continue the WinCenter installation, insert the WinCenter Connect CD, and follow
the instructions in Chapter 2, “Installing Service Packs” in the WinCenter Connect
Installation and User’s Guide.
Installing WinFrame
Logging In as Administrator, Logging Off, and Shutting Down
To login as system administrator:
1. Power on or restart the WinFrame server. The following occurs:
a. A series of messages is displayed in DOS mode as the computer performs system
checks and loads software into memory. You do not need to do anything.
b. The WinFrame title screen displays, reflecting the name you assigned this computer during WinFrame installation.
2. Press Ctrl+Alt+Del. The login dialog displays.
3. In the login dialog, enter the user name “Administrator”, and the password you
specified for the Administrator in the WinFrame Installation procedure (Step 32 on
page 11).
To log off:
1. In the Program Manager’s File menu, select Logoff. The Logoff Windows NT dialog
2. In the logoff dialog, click OK. You are returned to the WinFrame title screen.
To shut down the WinFrame server:
1. In the Program Manager’s File menu, select Shutdown.
2. In the Shutdown Computer dialog, do one of the following:
To shut down the computer and turn it off, select Shutdown, then click OK. The
computer writes needed data to disk, then displays a message that it is safe to
turn off the computer (or restart it).
To shut down and automatically restart the computer, select Shutdown and Restart,
then click OK. The computer writes needed data to disk, then begins the startup
Installing WinFrame
Manual Correction
In the WinCenter WinFrame Installation Guide, Chapter 2, “Setting Up Master Files on a Server”
is incomplete. In addition to the files that section instructs you to copy to the network
computer, you should also copy the \DRVLIB directory. This directory contains additional
network drivers that may be required depending on your hardware configuration. The revised
procedure is:
Method 1:
Place the WinFrame compact disk in a CD drive connected to a network computer.
Share the root directory of the CD drive.
Method 2:
a. Connect to the drive where you want to install the WinFrame master files.
b. Create the shared directory on the drive that will contain the WinFrame master
files. Create the following directories for the master files in the shared directory:
3. In Program Manager, choose the Command Prompt icon. Then use the xcopy
command to copy the WinFrame master files to the shared directories you created.
The correct syntax is the following:
xcopy /s cdrom:\i386 share_directory\i386
xcopy /s cdrom:\drvlib\netcard\x86
For example, if drive F is your CD drive and \\WINNT35.SRC is your shared
directory for the WinFrame master files, type the following commands:
xcopy /s f:\i386 winnt35.src\i386
xcopy /s f:\drvlib\netcard\x86
Installing Custom HAL Drivers
If your WinFrame server is a Symmetric Multiprocessor (SMP) machine, the Hardware
Abstraction Layer (HAL) driver provided by the machine's manufacturer is preferred over that
provided by WinFrame.
Because Service Pack 5 removes custom HALs, install the HAL for your system after installing
Service Pack 5.
For further information about HALs or your SMP machine, double click the WinFrame Help
icon in the Main program group. Then select the WinFrame Solutions Guide listed on the
Contents tab.
Installing and Using Windows NT Applications
Note For further information about installing applications, double click the
WinFrame Help icon in the Main program group. Select the Contents tab.
Select IMPORTANT! READ ME FIRST! Then select General Installation of
Applications on WinFrame.
To install Windows NT applications on the WinCenter server:
1. At the WinCenter server console, log on as Administrator.
2. Ensure that no other users are logged on. To see who is logged on, select
Administrative Tools ➙ WinStation Administration ➙ View ➙ Users.
3. From Program Manager, select File ➙ Run.
4. Enter change user /install and press OK.
5. Follow the installation instructions to install your Windows NT applications.
6. When finished installing applications, select File ➙ Run from Program Manager.
7. Enter change user /execute and press OK.
Closing NT Applications
Do not use the Alt+F4 key combination to close Windows NT applications running on your
NCD network computer. Alt+F4 is sent to by your NCD network computer window manager
to WinCenter. You'll then see a prompt asking if you want to log off WinCenter.
To have Alt+F4 sent to your NT application and not WinCenter:
turn off your NCD network computer’s window manager and use the WinCenter
window manager (WinCenter Desktop Icon ➙ Desktop ➙ Start Window Manager), or
reconfigure your NCD network computer window manager. Change the association it
has between Alt+F4 and Close. Refer to your window manager's man page for specifics
on how to reconfigure the window manager.
WinCenter Connect NIS
WinCenter's Network Information Service (NIS) provides various capabilities related to the
administration of network databases. Further information is located in Chapter 8 of the
WinCenter Connect Installation and User's Guide. Some things to note about NIS include:
NIS Configuration Tool:
The NIS Configuration tool is located in the WinCenter Administration program group.
It appears only to administrator users.
Logon Management:
User accounts are validated against an NIS password database. Accounts validated this
way are called NIS accounts.
Controlling NIS accounts:
The home directory drive specified for NIS accounts is global, not per user.
When using AMD format mount maps, wildcards and conditionals are not
Home directory automounting:
The NIS Configuration tool allows these choices for managing NIS users' home
Local path
The NIS user's home directory is set to the specified local path.
Network path (explicit)
The NIS user's home directory is mounted on the specified drive letter and set to
the specified network path.
Network path (implicit)
The NIS user's home directory is mounted on the specified drive letter and set to
the network path derived from the NIS password database and mapped through
the NIS automounter database. The automounter database may be in either Sun
or AMD format. Note that this functionality requires that the InterDrive NT NFS
client is installed and running.
ASCII file automount databases are not supported.
The +mapname include map filename syntax is not supported in automount database map files.
The /-mapname syntax in automount databases must not have any extra characters or whitespace following mapname.
If you change NIS using the NIS Configuration tool from a non-console device,
you must log on and log off the console before the changes take effect.
WinCenter Connect NIS
Changing NT accounts to NIS accounts — If you have existing NT accounts that you
want to manage with NIS:
1. In the Administrative Tools program group, double click the User Manager for
Domains icon.
2. Select the user accounts you want NIS to manage by:
using <Shift> + <Left mouse button> to select multiple consecutive users,
using <Ctrl> + < Left mouse button> to select multiple non-consecutive users,
User ➙ Select Users to select groups of users.
3. Select User ➙ Properties.
4. Set the Description field to NIS account, then click OK.
Using InterDrive NT
When using InterDrive NT, you must correctly configure the Authentication Server on the
Security tab in the InterDrive Client Properties dialog. If you don't configure it correctly, a
PCNFSD error can occur, which only the administrator can correct.
There is a known problem with NFS printing in this version of InterDrive NT. Use “Client
Network”, “Microsoft Network” or local printing methods instead.
InterDrive NT will not use LMHOSTS to resolve names into IP addresses. Please configure DNS
on your WinCenter server.
About WinFrame 1.6
Hardware Compatibility Information
For information on hardware compatibility and guidelines for configuring your WinFrame
server, refer to the Microsoft Windows NT 3.51 Hardware Compatibility List. This list can be
obtained by downloading the following file from Microsoft's FTP site (
The Hardware Compatibility List is available online in the Main program group after
WinFrame has been installed.
Additional Information
The SETUP.TXT file in the \I386 directory on the WinCenter WinFrame CD contains additional
information from Microsoft regarding Windows NT 3.51. This information is also applicable to
WinFrame, since WinFrame is based on NT 3.51. You many need some of this information prior
to installing WinFrame.
These release notes contain condensed WinFrame installation instructions.
Online Information
After installing WinFrame, the Main program group contains WinFrame Books Online. All the
WinFrame manuals, except the WinFrame PC Client User's Guide, are online. WinFrame Books
Online requests your WinCenter WinFrame CD. If you would like to access the books without
having your WinFrame CD in the drive, copy the files from the \SUPPORT\BOOKS directory
on the CD to a \SUPPORT\BOOKS directory on your hard drive.
The Main program group also contains a WinFrame Help icon. Select this icon to get topical
help about WinFrame.
WinFrame Restrictions
Novell NetWare 4.x NDS Support — NDS-aware applications (e.g. nwadmin and
netadmin) are not supported at this time. However, these utilities can be run from a network
workstation running DOS or Windows 3.x, or a remote workstation connected to WinFrame
RAS using the Dial-Up Manager supplied with WinFrame DOS and Windows 3.1 Clients or
a third-party RAS package. This allows administration of NetWare 4.x servers from a remote
DOS or Windows 3.x workstation. Refer to the Readme “Remote NetWare 4.x
Administration Using NETADMIN and NWADMIN Over a RAS Connection” in WinFrame
Help for detailed information. NDS drive map objects are not supported; use direct drive
assignments to a volume and directory path instead.
Password Synchronization with NetWare 4.x NDS File Servers — Password
synchronization with NetWare 4.x NDS severs is not supported at this time; however,
password synchronization with NetWare 4.x servers running Bindery Emulation is
Using WinCenter
If you reinstall NCDware on your WinCenter server, the existing ncd_std file in the
\tftpboot\usr\lib\X11\ncd\configs directory is copied to ncd_std.old.
WinCenter WS+:
Solaris Volume Manager — When the Solaris Volume Manager manages the Solaris
workstation’s floppy drive, the Solaris File Manager opens a window on the workstation
screen when the diskette is initially inserted in the drive and accessed from WinCenter. To
prevent this window from appearing, turn off the Solaris Volume Manager or configure it so
that it does not manage the workstation floppy drive. For further information, see your
Solaris documentation.
Using Non-default Floppy Devices — To use a different floppy device than those listed on
page 6-3 of the WinCenter Connect Installation and User’s Guide, use the -devfloppy option
or set the WINCENTER_DEV_FLOPPY UNIX environment variable. The -devfloppy
option is explained in Appendix A of the WinCenter Connect Installation and User’s Guide.
Set the WINCENTER_DEV_FLOPPY environment variable as follows:
setenv WINCENTER_DEV_FLOPPY floppy_device_path (C shell)
WINCENTER_DEV_FLOPPY floppy_device_path (Bourne or K shell)
For example:
setenv WINCENTER_DEV_FLOPPY /dev/fd1
WinCenter PC Clients:
Floppy Drive Support — Contrary to statements in the WinCenter Connect Installation and
User’s Guide, floppy drive support is not available in this release of the WinCenter PC
Clients. You cannot, therefore, write WinCenter data to the floppy drive of your WinCenter
PC Client personal computer.
Removing WinCenter Chooser Entries — You can delete a WinCenter server entry that you
added to the WinCenter Server List if you are using the PC Client on Windows 95, Windows
NT 4.0, or Windows NT 3.51. To delete a server entry that you have added, select the entry
in the WinCenter Server List and then press the Delete key.
Using WinCenter
Bootp Configuration:
When bootp starts, an informational message incorrectly appears as an error in the
Administrative Tools ➙ Event Viewer log. That error appears as:
bootp error: 0, version 2.3.7
and can be disregarded.
Shadowed Sessions:
Graphics cut and paste (WinCenter Desktop Icon ➙ Select Graphics Cut-and-Paste Area)
does not work in a shadow session.
Audio is not supported in shadow sessions.
Network Computing Devices, Inc.
350 North Bernardo Avenue
Mountain View, CA 94043-5207
Telephone: 503/641-2200
FAX: 503/641-2959
Email: [email protected]
World Wide Web:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF