Hannspree ST59-23A1 User manual

Hannspree ST59-23A1 User manual
23" Liquid Crystal Display
Television
2F, No.362, Rueiguang Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C.
TEL: 886-2-87520000
ST59-23A1
ME
NU
FAX: 886-2-87527092
www.hannspree.com
User's Manual
AU
TO
/M
UT
NTSCTVTWEN1203
MAC-001150
E
SO
UR
CE
Table of Contents
1.
2.
3.
4.
5.
6.
Warranty and Service .................................................... 4
Preface ......................................................................... 5
Description of Warning Symbols ..................................... 6
Safety Notices ............................................................... 7
Regulatory Information ................................................ 15
Introducing the TV ....................................................... 17
Features .................................................................. 18
7. Checking Package Contents ........................................ 19
8. Getting to Know Your TV ............................................. 20
Front Panel Controls ............................................... 20
Front View Ports ..................................................... 22
Rear Panel Input and Output Ports ........................... 23
9. Getting Started ............................................................ 25
Making Connections ................................................. 25
Connecting to an Antenna or Cable TV ..................... 26
Connecting to a VCR, VCD or DVD Player using
Component Video ............................................... 27
Connecting to a Video Camera using S-Video ...... 28
Connecting to a VCR, VCD or DVD Player using
Composite Video ................................................. 29
Connecting Earphones ............................................. 30
Connecting an Amplifier or Speakers ........................ 31
Connecting to a PC .................................................. 32
Connecting the Power Adapter ................................. 33
Inserting a Flashcard ............................................... 34
10. Using the TV .............................................................. 35
Using the Remote Control ........................................ 35
Turning the TV On and Off ....................................... 36
Selecting Channels .................................................. 36
Adjusting the Volume ............................................... 37
Switching Source Signals ......................................... 37
Using PIP and POP .................................................. 38
1
Table of Contents
Using the Flashcard Feature ....................................
Starting Flashcard ...............................................
Remote Control Keys ..........................................
Viewing Photos ...................................................
Listening to Music ...............................................
Watching Videos .................................................
Viewing Flashcard Files .......................................
Using the Setup Menus ............................................
Music Setup ........................................................
Slide Show Setup ................................................
Movie Setup ........................................................
Preferences ........................................................
11. Adjusting On Screen Display (OSD) Settings ...............
OSD Setting Menus .................................................
Picture Settings .......................................................
Brightness ..........................................................
Contrast .............................................................
Backlight (PC mode) ...........................................
Hue ....................................................................
Saturation ...........................................................
Sharpness ..........................................................
Black Level .........................................................
Color Temperature ..............................................
Preset ................................................................
Audio Settings .........................................................
Treble .................................................................
Bass ...................................................................
Balance ..............................................................
BBE, TruSurround, and EALA ..............................
Earphone ............................................................
Preset ................................................................
2
40
40
41
42
44
45
45
46
46
46
47
47
48
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
62
63
64
Table of Contents
12.
13.
14.
15.
TV Settings .............................................................
TV/CATV ............................................................
MTS ...................................................................
Auto Scan ...........................................................
Channel Add/Erase .............................................
Favorite Channel .................................................
PC Settings .............................................................
Phase .................................................................
Clock ..................................................................
Auto Adjustment ..................................................
DOS Mode ..........................................................
Horizontal Position ..............................................
Vertical Position ..................................................
Miscellaneous Settings ............................................
Wide ...................................................................
Language ...........................................................
Sleeper ...............................................................
Time ...................................................................
Taking Care of Your TV ..............................................
Troubleshooting ..........................................................
Specifications .............................................................
PIP Operation Mode .................................................
Computer Compatibility Chart ...................................
Glossary ....................................................................
65
66
67
68
69
70
71
72
73
74
74
75
76
77
78
78
79
80
81
82
84
85
86
87
3
1
Warranty and Service
The instructions on this manual are for the model(s) listed on the front
cover. Before you start reading, check your product number by looking
at the rear of your TV.
Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and
video while enriching your lifestyle with advanced technology.
The Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the "Warranty and Service Manual" for the
detailed warranty information.
Hannspree provides complete service information in the included
"Warranty and Service Manual" or directly from the Hannspree customer service center. Our service representatives will be very happy to
serve you to your satisfaction.
The Hannspree e-mail address:
[email protected]
4
2
Preface
This manual is designed to assist users in setting up and using the LCD
TV. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents.
The information in this document is subject to change without notice.
Copyright
© Copyright 2004 Hannspree, Inc.
All rights reserved. This product and related documentation are protected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.
BBE, SRS, EALA Statement
•
•
•
•
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and
5736897.
BBE and BBE symbol are registered trademarks of BBE Sound,
Inc.
BBE High Definition Sound restores clarity and presence for better speech intelligibility and musical realism.
is a trademark of SRS Labs, Inc. TruSurround
technology is incorporated under license from SRS
Labs, Inc.
EALA is a trademark of New Japan Radio Co., Ltd.
5
3
Description of Warning Symbols
Warning
Caution
This symbol is used to remind
users to pay attention to
important descriptions regarding usage and maintenance
(repair) or additional important information related to this
product.
This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal noninsulated components.
Electric Power Notice
Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” on page 7 carefully
before using the product to ensure that your TV’s safety.
6
4
Safety Notices
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.
2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.
3. If the power cord or plug is damaged or worn, unplug it immediately and contact a qualified service technician for maintenance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible, unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.
Location
Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat to the TV. Leave sufficient distance
between the TV and the wall to provide enough space for the emission of heat.
7
Before You Proceed
1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.
2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.
3. Follow the product and warning label instructions.
4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.
Warning
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Power
To avoid danger of fires or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapter:
• LI SHIN INTERNATIONAL ENTERPRISE CORP.:
LSE0226B20150
8
Optimal Viewing Distance
250 cm
9
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10
Protect the power cord from being walked on or
pinched, particularly at the plug, convenience
receptacles, and the point where they exit from
the apparatus.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Only use attachments/accessories specified by
the manufacturer.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as if the powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
11
Personal Safety
To avoid overloading the power supply, do not
plug too many electrical devices into a power
outlet or extension cable.
Dangerous high-voltage electric power components are located inside the TV. To avoid electric
shock, do not disassemble the casing.
Do not place or drop small metallic objects or
flammable materials in the vent to avoid an electric shock or a fire.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.
If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.
The screen of the TV is made of glass; be careful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.
Do not allow children to use the TV unattended
to avoid accidents caused by improper operation.
12
Installation
To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.
Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.
Install the outdoor antenna as far away as possible from power transmission lines to avoid possible danger.
Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.
13
Operation
V
This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
The plug can be inserted into an outlet in only
one direction. Notify a qualified service technician if you cannot plug it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this manual, notify a qualified service technician immediately. Do not attempt anything not described in
this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the service technician to complete a safety inspection
before switching on the power after completing
any maintenance.
14
5
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
1. applies only to products purchased in the United States of America
15
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council Directive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
16
6
Introducing the TV
Thank you for purchasing this Liquid Crystal
Display TV. Your TV is designed to be safe,
versatile, and easy to use. Its sleek, yet
sturdy design makes it a decorative addition
to your living room.
You can watch standard NTSC broadcast or
cable television channels, and easily
connect a VCR, VCD, or DVD player to the
standard CVBS and S-Video input ports
located at the rear and front of the unit. You
can also use the TV as a monitor for your
PC by connecting it through the DVI port.
AUTO/MUTE SOURCE
MENU
Convenient control buttons located on the front panel let you change
channels, adjust the volume, and change display settings through an
easy-to-use on-screen menu system. The TV speakers provide full,
rich stereo sound and a convenient audio output port lets you
connect to an external audio system or headphones.
17
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
23-inch color TFT LCD TV
Safe, sturdy construction
Built-in dual TV tuner
Audio/video support:
– Stereo audio inputs
– Composite video inputs
– Component video input
– S-Video inputs
– 3.5 mm stereo headphone output
– DVI input
On-screen display (OSD) menu system
Multi-channel Television Sound (MTS) with SAP
Built-in 7.5W+7.5W stereo audio amplifier
PIP/POP
Flashcard reader
Image Enhancement Technology
– 3:2 pull down
– DCDi
– 3 D Y/C comb filter
Noise Reduction
De-interlace
Edge Enhancement
18
7
Checking Package Contents
Checking Package Contents
Make sure the following components are included in the box. Contact
your vendor immediately if anything is missing or damaged.
TV
MENU
User’s Manual
(TV + RC)
User's Ma
nual
AUTO/MUTE SOURCE
Quick Start Guide
Warranty and Service
Manual
Quick Sta
Guide rt
Warranty
and
manual service
Cables
E77
874
Power Adapter
W
-1
Power Cord
V
0V
G W A 1 8 30
80 C
19
8
Getting to Know Your TV
Getting to Know Your TV
Front View Controls
9
MENU
AUTO/MUTE SOURCE
8
8
S VIDEO
L
R
VIDEO
AV4
MENU
1
1
2
AUTO/MUTE SOURCE
2
3
4
5
6
7
Description
Function
Menu
Turns the on-screen display (OSD)
menus on and off. In PC mode, both the
green and red LED are illuminated,
indicating sleep status.
Select channel
Changes the channel. Press S to
increase the channel number. Press T
to decrease the channel number.
These buttons are also used to navigate
OSD menus.
20
Description
Function
3
Infrared sensor
Point the remote control towards the
sensor to operate the TV.
4
Power button and
LED
Turns the TV on and off. The green LED
indicates power on.
Adjust volume
Press the + button to increase the
volume. Press the – button to decrease
the volume.
These buttons are also used to navigate
OSD menus.
6
Auto/Mute
Press this button to disable sound.
Press this button again or press the
volume adjust buttons directly to restore
sound.
In PC mode, press this button to
automatically adjust the screen for your
PC’s display adapter.
7
Source
Selects the input source to be displayed
(TV, AV1, AV2, AV3, AV4, AV5 [card
reader], or PC).
8
Speakers
Produce high quality sound.
AV5–FLASHCARD
slot
Insert a CF card into this slot to view the
contents of the CF card. Use the
Flashcard feature to view the contents.
See “Using the Flashcard Feature” on
page 40.
5
9
21
Front View Ports
MENU
AUTO/MUTE SOURCE
S VIDEO
L
R
VIDEO
AV4
S VIDEO
ViDEO
L
R
AV4
1
2
Description
Function
1
AV4
Use the AV4 input to connect an external
device, such as a VCR or a VCD/DVD
player.
Audio Input (L, R): white and red audio
cables.
Video Input (S-Video or Video): yellow
(video) or S-Video cable.
2
Headphone line out
Connects to headphones
22
Rear Panel Input and Output Ports
DV
DVI
LINE IN
1
2
3
L
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
R
L
PR
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
AV 2
AV 1
LINE OUT
R
LINE IN
PB
Y
R
4
L
VIDEO S-VIDEO
5
AV 3
R
L
6
VIDEO
ANT
DC-IN
7 8
Description
Function
1
DVI
Connects to a PC’s DVI port.
2
Line in
Connects to a PC’s line/audio in port.
3
Line out
Connects to external amplifier or
speakers.
23
Description
Function
AV1
Use the AV1 input to connect an external
device, such as a VCR or a VCD/DVD
player with a component output.
Audio Input (L, R): white and red audio
cables.
Video Input (Y, PB, P R): video cables.
AV2
Use the AV2 input to connect an external
device, such as a VCR or a VCD/DVD
player.
Audio Input (L, R): white and red audio
cables.
Video Input (S-Video or Video): yellow
(video) or S-Video cable.
6
AV3
Use the AV3 input to connect an external
device, such as a VCR or a VCD/DVD
player with a composite output.
Audio Input (L, R): white and red audio
cables.
Video Input (Video): yellow (video)
cable.
7
Antenna/cable TV
line in
Connects to an antenna or CATV cable
television line.
8
DC-IN
Connects to the included power adapter.
4
5
24
9
Getting Started
Getting Started
Making Connections
Open the back cover by pulling it toward you and lifting it upwards to
get access to the input and output ports as shown:
25
Connecting to an Antenna or Cable TV
1 Connect one end of the VHF/UHF (Antenna) or CATV cable to
the ANT Jack (VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV
cable to the Antenna or CATV socket.
Antenna
DV
DVI
LINE IN
L
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
AV 1
LINE OUT
R
LINE IN
R
L
PR
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
AV 3
AV 2
PB
Y
R
L
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
Antenna/CATV socket
ANT jack
(VHF/UHF IN jack)
Antenna/CATV
coaxial cable
Note:
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Scan” on page 68.
26
Connecting to AV Devices
Connect external devices such as VCD/DVD players or VCRs to the
TV using the AV1, AV2, AV3, and AV4 ports on the back or front of
the TV.
Connecting to a VCR, VCD or DVD Player using Component
Video
The illustration presented here shows you how to connect your TV to
a VCR, VCD or DVD player using the AV1 component video port.
Actual connections may vary according to the make and model of
your device. Refer to the user’s manual included with the AV device
for more detailed instructions.
VCR
DV
LINE IN
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
S-VIEDO
R
AV3
L
VIEDO
AN
VCD
DC IN
DVD
DVI
LINE IN
AV 1
LINE OUT
R
L
R
L
PR
AV 3
AV 2
PB
Y
R
L
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
Y
PB
PR
R
L
AV1
Video cable
Audio cable
Cables and connectors are colorcoded (red, blue, green).
27
Connecting to a Video Camera using S-Video
The following illustration shows you how to connect the TV to a
camcorder using the AV2 S-video port. Actual connections may vary
according to the make and model of the device. Refer to the user’s
manual included with the camcorder for more detailed instructions.
WB
DV
DVI
LINE IN
L
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
R
L
PR
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
AV 3
AV 2
AV 1
LINE OUT
R
LINE IN
PB
Y
R
L
S
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
S-Video
connector
S-VIDEO
R
L
Audio
connectors
AV2
Video cable
Audio cable
Note: When connecting the S-Video
connector and AV connectors at the
same time, the priority is given to the
S-Video connector.
28
Cables and connectors are colorcoded (red, white, yellow).
Connecting to a VCR, VCD or DVD Player using Composite
Video
The illustration presented here shows you how to connect your TV to
a VCR, VCD or DVD player using the AV3 composite video port.
Actual connections may vary according to the make and model of
your device. Refer to the user’s manual included with the AV device
for more detailed instructions.
VCR
VCD
DV
LINE IN
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
DVD
DVI
LINE IN
AV 1
LINE OUT
R
L
R
L
PR
AV 3
AV 2
PB
Y
R
L
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
VIDEO R
L
AV3
A/V cable
Cables and connectors are colorcoded (red, white, yellow).
29
Connecting Earphones
You can use headphones to listen to the TV instead of using the builtin speakers. Connect headphones to the headphone line out port as
illustrated.
MENU
Earphones
AUTO/MUTE SOURCE
S VIDEO
L
R
VIDEO
AV4
S VIDEO
VIDEO
L
R
AV4
Earphone
port
Note: Earphones are not included with the product.
30
Connecting an Amplifier or Speakers
Connect an external amplifier or speakers to the line out port to
provide better sound quality. Refer to the following illustration.
Amplifier and speakers
DV
DVI
LINE IN
L
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
R
L
PR
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
AV 3
AV 2
AV 1
LINE OUT
R
LINE IN
PB
Y
R
L
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
R
L
Line in
31
Connecting to a PC
Connect the TV to your PC to use it as the monitor using the DVI port
as shown.Connect the DVI port of the TV to the DVI output of the PC.
Connect the line out port of the PC to the line in port of your TV to
listen to audio from the PC.
DV
DVI
LINE IN
L
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
R
L
PR
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
AV 3
AV 2
AV 1
LINE OUT
R
LINE IN
PB
Y
R
L
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
PC
DVI port
32
Line out
Inserting a CF card
1 Insert the CF card in the direction of the arrow.
8 MB
2 To remove the CF card, press the button. the CF card pops
out. Gently slide out the CF card.
33
Connecting the Power Adapter
1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN on the rear
panel of the TV.
3 Plug the three-pronged plug at the other end of the power cord
into a power outlet.
Power outlet
DV
LINE IN
R
LINE OUT
L
R
L
AV1
Rr
AV2
Pb
Y
R
L
VIEDO
S-VIEDO
R
AV3
L
VIEDO
AN
DC IN
Three-pronged
plug
DVI
LINE IN
AV 1
LINE OUT
R
L
R
L
PR
AV 3
AV 2
PB
Y
R
L
VIDEO S-VIDEO
R
L
VIDEO
ANT
DC-IN
Power cord
DC-IN
Power adapter
34
10
Using the TV
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 6 meters
(20 feet) from the front of the TV’s signal sensor. Do not exceed an
angle of 30 degrees when pointing at the signal sensor. Refer to the
following illustration.
4m
30
4m
30
6m
35
Turning the TV On and Off
1 Press the POWER button on the
remote control or on the TV control
panel. The power LED indicator on
the front of the TV changes from
MENU
AUTO/MUTE SOURCE
S VIDEO
L
R
VIDEO
AV4
red to green, indicating that the
power is on.
MENU
AUTO/MUTE SOURCE
2 Press the POWER button again.
The power LED changes from
Power button and LED
green to red, indicating that the
TV is in standby (off) mode.
Selecting Channels
1 Press the CH S button to increase
the channel number by one.
2 Press the CH T button to decrease
the channel number by one.
MENU
AUTO/MUTE SOURCE
S VIDEO
L
R
VIDEO
AV4
3 Enter the specific channel number
by pressing the number buttons on
MENU
the remote control. The channel is
displayed on the LCD panel.
36
Channel up
Channel down
AUTO/MUTE SOURCE
Adjusting the Volume
1 Press the VOL + button to
increase the volume.
2 Press the VOL – button to
MUTE
decrease the volume.
MENU
AUTO/MUTE SOURCE
S VIDEO
L
R
VIDEO
AV4
3 Press the AUTO/MUTE button. The
word “MUTE” appears on the
MENU
AUTO/MUTE SOURCE
bottom right corner of the screen
and sound is turned off.
Mute
Volume up
Volume down
4 Press the AUTO/MUTE button
again to restore the original volume.
Switching Source Signals
Press the SOURCE button repeatedly to
select different source signals.
AV1
The selected source signals – TV, AV1,
AV2, AV3, AV4, AV5 (card reader) and
PC – appear on the top left corner of
the screen in that order.
Note:
The TV supports S-Video input in addition
to normal video and audio signals. The TV
detects the signal type automatically and
gives priority to S-video when two signals
are detected at the same time.
MENU
AUTO/MUTE SOURCE
S VIDEO
L
R
VIDEO
AV4
MENU
AUTO/MUTE SOURCE
Source
37
Using PIP and POP
The TV features Picture-in-Picture (PIP) and Picture-on-Picture,
enabling you to view two sources at the same time. Follow these
instructions.
1 Turn on the TV and select a
MAIN - TV CH 007
source signal.
2 Press the PIP button on the
remote control.
MAIN - TV CH 007
PIP - CATV CH056
A picture-in-picture window
appears on the display, using the
last selected source signal for the
PIP.
Note:
Refer to “PIP Operation Mode” on page 85 for information on which
sources are compatible with each other in PIP and POP mode.
3 Press the SWAP button on the
remote control to switch the focus
from the PIP to the main source.
The PIP identification line
disappears and the PIP window
border disappears.
38
MAIN - TV CH 007
4 Press the POSITION button on
the remote control to move the
PIP window to one of the four
corners of the screen as shown.
5 Press the PIP button to switch to
picture outside picture (POP)
MAIN - TV CH 007
POP - TV CH 002
mode.
The two signals are displayed
side-by-side.
6 Press the PIP button again. The
MAIN - TV CH 007
screen displays the main source
signal again.
39
Using the Flashcard Feature
The Flashcard feature enables you to view photos, watch movies,
and listen to MP3 files on CF cards inserted in the CF card slot (AV
5). The following describes the Flashcard feature.
Starting Flashcard
1 Insert a CF card into the CF card slot (AV 5). Refer to “Inserting
a CF card” on page 33.
2 Use the remote control navigation buttons to switch to AV5.
The Flashcard main screen
appears:
MAIN
AV5
FLASHCARD
From this screen, you can
choose to view photos, listen
PHOTO
MUSIC
VIDEO
FILE
to music, watch videos, or
look at the contents of the CF
card.
Flashcard main screen
3 Use the remote control
navigation buttons to select a
file format, and press Enter to
open the file format page
view.
Note:
Presently, the TVs support the five
CF card manufacturers below.
1.PQI, 2.HAGIWARA, 3.SanDisk,
4.TRANSCEND, 5.KINGSTON
40
PAGE
01/04
Photo format page view
Remote Control Keys
The following table lists the remote control buttons used to operate
the Flashcard feature.
Button
Navigation
(up/down
left/right)
Flashcard Name
Function
Press these buttons to
navigate the Flashcard menus.
—
Enter
—
In Picture mode, use these
buttons to pan a picture when
zoomed in.
Press this button to confirm a
selection or to activate a
function.
Menu
Menu
Press this button to open the
setup menu.
Hold
Root
Press this button to return to
the Flashcard main screen.
PIP
Slide Show
Press this button to start and
stop the slide show.
Sleep
Zoom
Press this button to zoom in on
a picture. Zoom ratios are
available: 1X, 2X, 3X, or (4x).
Caption
Rotate
Press this button to rotate a
picture when in Picture mode.
Page Up
Press this button to go to the
next page in the menus.
Page Down
Press this button to go to the
previous page in the menus.
Swap
Position
41
Viewing Photos
1 Use the remote control navigation buttons to select PHOTO.
2 Press the Enter button.
A screen appears displaying
thumbnails of images on the CF
card.
3 Use the navigation buttons to
select a thumbnail image.
PAGE
01/04
4 Press the Enter button.
The selected thumbnail expands
to full screen mode.
5 Press the right or down
navigation button to go to the next
picture. Press the left or up
navigation button to go to the
previous picture.
Zooming and Panning
The Flashcard feature enables you to zoom in on images and pan
the view. Follow these instructions.
1 Put an image in full screen mode as described in the previous
section.
2 Press Sleep on the remote control to zoom in on the image.
Three zoom ratios are available: 1X, 2X, 3X, or (4X).
3 When zoomed in on an image, press the right, left, down, and
up navigation buttons on the remote control to pan the image.
42
Rotating Images
Follow these instructions to rotate images when in Photo mode.
1 Put an image in full screen mode as described in the previous
section.
2 Press Caption on the remote control.
The image is rotated 90 degrees (90°) in a clockwise direction.
Note:
You cannot rotate an image when the image is being zoomed.
Viewing a Slide Show
Flashcard has a slide show feature that enables you to view your
images.
1 Press PIP to start the slide show.
The files are viewed sequentially, and files in your music
library are also played in sequence.
2 Press PIP again to stop/pause the slide show.
Note:
Refer to “Slide Show Setup” on page 46 to configure slide show settings
such as interval time, repeat options, and transition effects.
43
Listening to Music
1 Use the remote control navigation buttons to select MUSIC.
2 Press the Enter button.
MUSIC
A screen appears displaying
a list of the music stored on
your CF card.
3 Use the navigation buttons to
select a music file. The
selected file starts playing.
LIBRARY
01.LE PAPILLON
02.
A
B
C
A
HOPE AND MEMORY
WE WILL ROCK YOU ??????
Repeat: One
3:08
4:37
2:52
3:29
4:27
4:32
1:45
2:30
Page: 01/01
When the file finishes
playing, the next file in the list is played.
4 Press the Enter button to
open the Music Equalizer
screen. This screen enables
you to view information about
00:01:11
MUSIC
Name:
Araist:
Time:
EQUALIZER
AA
3:29
Type:
MP3
the file you are playing.
Note
Refer to “Music Setup” on page 46
for information on changing the
Repeat mode setting.
44
60
150
Repeat: All
400
1K
EQ:standard
2K
6K
15K
Song: 001/008
Watching Videos
1 Use the remote control navigation buttons to select VIDEO.
2 Press the Enter button.
A screen appears displaying
thumbnails of the videos on
your CF card.
3 Use the navigation buttons to
select a video file.
4 Press Enter. The selected
PAGE
01/01
video file begins playing.
Note:
Refer to “Movie Setup” on page 47 for information on setting Movie playback settings such as the interval time and repeat mode.
Viewing CF Card Files
1 Use the remote control navigation buttons to select FILE.
2 Press the Enter button.
A screen appears displaying a list of the files on your CF card.
The file type is denoted by the icons, and the file size, creation
date, and thumbnail view of the file provides additional
information.
3 Use the navigation buttons to select a file and press Enter. The
selected file is displayed or played.
45
Using the Setup Menus
From the Flashcard main screen,
press the Menu button to enter
the SETUP MENU MAIN PAGE.
Use the navigation buttons to
select a menu item and press
Enter to open the selected item.
Select EXIT SETUP and press
Enter to leave the setup menu.
SETUP MENU
MAIN PAGE
MUSIC SETUP
SLIDE SHOW SETUP
MOVIE SETUP
PREFERENCES
EXIT SETUP
GENERAL SETUP
After making your selections in
the submenus, use the navigation buttons to select MAIN PAGE and
press Enter to return to the SETUP MENU MAIN PAGE.
Music Setup
• Repeat Mode: Use the navigation buttons to select REPEAT
MODE. Repeat mode has the following options:
– ONE: repeats one MP3 file
– ALL: repeats all files in sequence
– OFF: turns repeat mode off
Slide Show Setup
• Folder Repeat: Use the navigation buttons to select FOLDER
REPEAT. Folder Repeat mode has the following options:
– ON: runs the slide show again in the selected folder.
– OFF: turns the folder repeat mode off.
• Interval Time: Use the navigation buttons to select INTERVAL
TIME. Set the interval time to 1, 3, 5, or 10 seconds.
• Transition: Use the navigation buttons to select TRANSITION.
and select a transition from the list.
46
Movie Setup
Select MOVIE SETUP and press Enter to display the movie setup
menu.
• Interval Time: Use the navigation buttons to select INTERVAL
TIME. Interval time mode has the following options:
– FAST: sets an increased interval speed between playback.
– NORMAL: sets the interval time to normal.
• Repeat Mode: Use the navigation buttons to select REPEAT
MODE. Repeat mode has the following options:
– OFF: turns the repeat mode off.
– ONE: repeats playback of selected movie.
– ALL: repeats playback of all movies in the folder.
Preferences
Select PREFERENCES and press Enter to display the preferences
menu.
• TV Type: Use the navigation buttons to select TV TYPE. TV
type mode has the following options:
– MULTI.SYSTEM: enables the system to automatically select
the standard (either NTSC or PAL).
– NTSC: sets the television standard to NTSC.
– PAL: sets the television standard to PAL.
• Video Output: Use the navigation buttons to select VIDEO
OUTPUT. Video output mode has the following option:
– S-VIDEO: sets the video output to S-VIDEO.
• Defaults: Use the navigation buttons to select DEFAULTS.
Select RESET and press Enter to reset the Flashcard settings
to default values.
47
11
Adjusting On-Screen Display (OSD)
Settings
Adjusting On-Screen Display (OSD) Settings
The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust your TV's settings. This chapter describes
how to change each of the available settings. The OSD menu can be
accessed through either the front control panel or the remote control.
Button Descriptions
Front Panel Control
Menu
CH Up
CH Down
VOL Up
VOL Down
MENU
S
T
+
–
The following sections explain how to adjust settings in the OSD
menus using the front panel control.
OSD Setting Menus
MAIN MENU
PICTURE
AUDIO
TV
MENU
AUTO/MUTE SOURCE
MISCELLANEOUS
EXIT
: SELECT
Press MENU to enter the OSD
Main Menu screen.
: ENTER
MENU : CLOSE
The Main Menu appears.
Notes:
• Press the MENU button repeatedly to exit the OSD menus and submenus at any time.
• Alternatively, select the RETURN option in the menu to return to the previous menu.
48
Picture Settings
MAIN MENU
PICTURE
AUDIO
TV
MENU
AUTO/MUTE SOURCE
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
1 Press S or T to select
Press MENU to enter the OSD
Main Menu screen.
PICTURE.
2 Press + or – to enter the
PICTURE Menu.
Notes:
• You can control the OSD with either the remote control or the front
panel control.
• PC picture mode and TV picture mode have different menu items; PC
picture mode includes a Backlight adjustment.
49
Brightness
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select BRIGHTNESS. The
slider bar shows the current
setting.
2 Press the + button to increase
the brightness.
3 Press the – button to decrease
the brightness.
Note:
The new setting is confirmed automatically.
BRIGHTNESS
50
MIN
MID
MAX
0
50
100
Contrast
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select CONTRAST. The slider
bar shows the current setting.
2 Press the + button to increase
the contrast.
3 Press the – button to decrease
the contrast.
Note:
The new setting is confirmed automatically.
CONTRAST
MIN
MID
MAX
0
50
100
51
Hue
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
BLACK LEVEL
50
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select HUE. The slider bar
shows the current setting.
2 Press the + button to increase
the hue.
3 Press the – button to decrease
the hue.
Note:
The new setting is confirmed automatically.
HUE
52
MIN
MID
MAX
0
50
100
Saturation
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select SATURATION. The slider
bar shows the current setting.
2 Press the + button to increase
the saturation.
3 Press the – button to decrease
the saturation.
Note:
The new setting is confirmed automatically.
SATURATION
MIN
MID
MAX
0
50
100
53
Sharpness
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select SHARPNESS. The slider
bar shows the current setting.
2 Press the + button to increase
the sharpness.
3 Press the – button to decrease
the sharpness.
Note:
The new setting is confirmed automatically.
SHARPNESS
54
MIN
MID
MAX
0
1
7
Backlight (PC mode)
PICTURE
BRIGHTNESS
CONTRAST
BACKLIGHT
COLOR TEMP
PRESET
RETURN
: SELECT
1 Press the S or T button to
50
50
100
STD
OFF
select BACKLIGHT. The slider
bar shows the current setting.
2 Press the + button to increase
: ADJUST MENU : CLOSE
the backlight intensity.
3 Press the – button to decrease
the backlight intensity.
Note:
The new setting is confirmed automatically.
BACKLIGHT
MIN
MID
MAX
0
50
100
55
Black Level
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select BLACK LEVEL. The
slider bar shows the current
setting.
2 Press the + button to increase
the black level.
3 Press the – button to decrease
the black level.
Note:
The new setting is confirmed automatically.
BLACK LEVEL
56
MIN
MID
MAX
0
50
100
Color Temp
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select COLOR TEMP.
2 Press the + or – button to
change the color temperature.
The current setting is shown in
brackets. The following options
are available:
• STD Color – for standard color
settings.
• WARM Color – for color settings with red as the dominant
color.
• COLD Color – for color settings with blue as the dominant
color.
Notes:
•
•
The new setting is confirmed
automatically.
The default color temperature is
STD.
57
Preset
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACKLEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press the S or T button to
select PRESET.
2 Press the + or – button. “ON”
appears in the brackets. All
picture settings are returned
to the factory-set default
values.
Note:
The preset function erases all of your
custom picture settings.
58
Audio Settings
MAIN MENU
PICTURE
AUDIO
TV
MENU
AUTO/MUTE SOURCE
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
1 Press S or T to select
Press MENU to enter the OSD
Main Menu screen.
AUDIO.
2 Press + or – to enter the
AUDIO Menu.
Note:
You can control the OSD with either the remote control or the front panel
control.
59
Treble
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press the S or T button to
108
108
select TREBLE. The slider bar
shows the current setting.
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
2 Press the + button to increase
the treble.
3 Press the – button to decrease
the treble.
Note:
The new setting is confirmed automatically.
TREBLE
60
MIN
MID
MAX
0
108
216
Bass
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press the S or T button to
108
108
select BASS. The slider bar
shows the current setting.
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
2 Press the + button to increase
the bass.
3 Press the – button to decrease
the bass.
Note:
The new setting is confirmed automatically.
BASS
MIN
MID
MAX
0
108
216
61
Balance
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press the S or T button to
108
108
select BALANCE. The slider
bar shows the current setting.
OFF
ON
OFF
20
OFF
2 Press the + button to shift the
balance to the right speaker.
: ADJUST MENU : CLOSE
3 Press the – button to shift the
balance to the left speaker.
Note:
The new setting is confirmed automatically.
BBE, TruSurround, and EALA
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press the S or T button to
108
108
select BBE, TruSurround, or
EALA.
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
2 Press the + or – button to
select a setting for each
effect:
– BBE: off, high, low
– TruSurround: on, off
– EALA: on, off
Note:
Only one sound effect can be selected
at a time.
62
Earphone
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press the S or T button to
108
108
select EARPHONE. The slider
bar shows the current setting.
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
2 Press the + button to increase
the earphone volume.
3 Press the – button to decrease
the earphone volume.
Note:
The new setting is confirmed automatically.
EARPHONE
MIN
MID
MAX
0
20
50
63
Preset
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press the S or T button to
108
108
select PRESET.
2 Press the + or – button. “ON”
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
appears in the brackets. All
audio settings are returned to
the factory-set default values.
Note:
The preset function erases all of your
custom audio settings.
64
TV Settings
MAIN MENU
PICTURE
AUDIO
TV
MENU
AUTO/MUTE SOURCE
MISCELLANEOUS
EXIT
: SELECT
Press MENU to enter the OSD
Main Menu screen.
: ENTER
MENU : CLOSE
1 Press S or T to select TV.
2 Press + or – to enter the TV
Menu.
Notes:
• Operate the OSD with either the remote control or the front panel control.
• The TV OSD menu is not available if the input source is not TV.
65
TV/CATV
1 Press the S or T button to
TV
TV / CATV
MTS
TV
MAIN
OFF
AUTO SCAN
CH . ADD/ERASE ADD
FAV.CHANNEL
RETURN
: SELECT
: ADJUST MENU : CLOSE
select TV/CATV. The current
setting is shown in brackets.
2 Press the + button to select
CATV in order to receive
cable TV signals.
3 Press the – button to select
TV in order to receive
broadcast TV signals.
Note:
The default TV setting is “CATV”.
66
MTS
TV
TV / CATV
MTS
AUTO SCAN
CH . ADD/ERASE
FAV. CHANNEL
RETURN
: SELECT
1 Press the S or T button to
TV
MAIN
OFF
ADD
: ADJUST MENU : CLOSE
select MTS. The current
setting is shown in brackets.
2 Press the + or – button to
select from the various
MTS options:
• MAIN – select the main
audio signal.
• SAP – select the secondary
audio signal
• DUAL – enable both primary
and secondary audio signals. The primary signal is
output through the speakers.
The secondary signal is output through the earphones.
• EX. DUAL – exchanges the
primary and external secondary audio signals for
speakers and earphones,
i.e, the primary signal is output through the earphones
and the secondary signal is
output through the speaker.
Note:
If no secondary language is available, the MTS setting is always
set to the main audio signal.
67
Auto Scan
1 Press the S or T button to
TV
TV / CATV
MTS
TV
MAIN
OFF
AUTO SCAN
CH . ADD/ERASE ADD
FAV. CHANNEL
RETURN
: SELECT
: ADJUST MENU : CLOSE
select AUTO SCAN. The
current setting is shown in
brackets.
2 Press the + button to enable
auto scanning. “ON” is
displayed in brackets and the
TV starts scanning
automatically for TV channels.
Note:
The TV screen displays the current
channel that is successfully tuned after
scanning is completed.
68
Channel Add/Erase
TV
TV / CATV
MTS
AUTO SCAN
CH . ADD/ERASE
FAV. CHANNEL
RETURN
: SELECT
1 Press the S or T button to
TV
MAIN
OFF
ADD
: ADJUST MENU : CLOSE
select CH. ADD/ERASE. The
current setting is shown in
brackets.
2 Press the + button to add the
current channel.
3 Press the – button to delete
the current channel.
Note:
You can still access the erased channel
by entering the channel number using
the number buttons on the remote
control. Add the channel again if it was
erased accidentally.
69
Favorite Channel
TV
TV / CATV
MTS
AUTO SCAN
CH . ADD/ERASE
FAV. CHANNEL
RETURN
: SELECT
1 Press the S or T button to
TV
MAIN
OFF
ADD
: ADJUST MENU : CLOSE
FAV.CHANNEL SETTING
CHANNEL 1
54
CHANNEL 2
32
CHANNEL 3
XX
CHANNEL 4
XX
RETURN
select FAV.CHANNEL.
2 Press the + or – button to
enter the FAV.CHANNEL
menu.
3 Press the S or T button to
select a favorite channel
number 1 ~ 4.
4 Press the + or – button to
: SELECT
: ADJUST MENU : CLOSE
choose a channel to assign to
the favorite channel number
you selected in step 3.
Note:
Assigning a channel to one of the four
favorite channel numbers replaces a
previously stored channel assignment.
70
PC Settings
MAIN MENU
PICTURE
AUDIO
PC
MENU
AUTO/MUTE SOURCE
MISCELLANEOUS
EXIT
: SELECT
Press MENU to enter the OSD
Main Menu screen.
: ENTER
MENU : CLOSE
1 Press S or T to select PC.
2 Press + or – to enter the PC
Menu.
Notes:
• Operate the OSD with either the remote control or the front panel control.
• The PC OSD menu is not available if the input source is not PC.
71
Phase
PC
PHASE
CLOCK
AUTO ADJ .
DOS MODE
H-POSITION
V-POSITION
RETURN
: SELECT
1 Press the S or T button to
15
50
OFF
GRAPHIC
50
15
: ADJUST MENU : CLOSE
select PHASE. The slider bar
shows the current setting.
2 Press the + button to increase
the phase.
3 Press the – button to decrease
the phase.
Note:
The new setting is confirmed automatically.
PHASE
72
MIN
MAX
0
31
Clock
PC
PHASE
CLOCK
AUTO ADJ .
DOS MODE
H-POSITION
V-POSITION
RETURN
: SELECT
1 Press the S or T button to
15
50
OFF
GRAPHIC
50
15
: ADJUST MENU : CLOSE
select CLOCK. The slider bar
shows the current setting.
2 Press the + button to increase
the clock.
3 Press the – button to decrease
the clock.
Note:
The new setting is confirmed automatically.
CLOCK
MIN
MAX
0
100
73
Auto Adjustment
PC
PHASE
CLOCK
AUTO ADJ .
DOS MODE
H-POSITION
V-POSITION
RETURN
: SELECT
1 Press the S or T button to
15
50
OFF
GRAPHIC
50
15
: ADJUST MENU : CLOSE
select AUTO ADJUSTMENT.
2 Press the + button to enable
auto adjustment. The display is
automatically configured for the
attached computer’s display
properties.
DOS Mode
PC
PHASE
CLOCK
AUTO ADJ .
DOS MODE
H-POSITION
V-POSITION
RETURN
: SELECT
1 Press the S or T button to
15
50
OFF
TEXT
50
15
: ADJUST MENU : CLOSE
select DOS MODE. The current
setting is shown in brackets.
2 Press the + or – button to
toggle the setting between
TEXT and GRAPHIC.
• TEXT – select this option when
using DOS at the command
line.
• GRAPHIC – select this option
when using DOS based graphical programs.
74
Horizontal Position
PC
PHASE
CLOCK
AUTO ADJ .
DOS MODE
H-POSITION
V-POSITION
RETURN
: SELECT
1 Press the S or T button to
15
50
OFF
GRAPHIC
50
15
: ADJUST MENU : CLOSE
select H POSITION. The slider
bar shows the current setting.
2 Press the + button to move the
display to the right.
3 Press the – button to move the
display to the left.
Note:
The new setting is confirmed automatically.
H POSITION
MIN
MID
MAX
0
50
100
75
Vertical Position
PC
PHASE
CLOCK
AUTO ADJ .
DOS MODE
H-POSITION
V-POSITION
RETURN
: SELECT
1 Press the S or T button to
15
50
OFF
GRAPHIC
50
15
: ADJUST MENU : CLOSE
select V POSITION. The slider
bar shows the current setting.
2 Press the + button to move the
display upward.
3 Press the – button to move the
display downward.
Note:
The new setting is confirmed automatically.
V POSITION
76
MIN
MID
MAX
0
15
30
Miscellaneous Settings
MAIN MENU
PICTURE
AUDIO
TV
MENU
AUTO/MUTE SOURCE
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
1 Press S or T to select
Press MENU to enter the OSD
Main Menu screen.
MISCELLANEOUS.
2 Press + or – to enter the
MISCELLANEOUS Menu.
Note:
Operate the OSD with either the remote control or the front panel control.
77
Wide
MISCELLANEOUS
WIDE
16 : 9
ENGLISH
LANGUAGE
OFF
SLEEPER
TIME
RETURN
1 Press the S or T button to
select WIDE. The current
setting is shown in brackets.
2 Press the + or – button to
: SELECT
: ADJUST MENU : CLOSE
select the screen format from
the following:
– 16:9
– 4:3
– Anamorphic
Language
MISCELLANEOUS
WIDE
16 : 9
ENGLISH
LANGUAGE
OFF
SLEEPER
TIME
RETURN
1 Press the S or T button to
select LANGUAGE. The
current setting is shown in
brackets.
: SELECT
: ADJUST MENU : CLOSE
2 Press the + or – button to
select the language from the
following:
– English
– Traditional Chinese
Note:
The default language setting is Chinese.
78
Sleeper
The sleep timer turns the TV off automatically after a set time.
MISCELLANEOUS
WIDE
16 : 9
ENGLISH
LANGUAGE
OFF
SLEEPER
TIME
RETURN
1 Press the S or T button to
select SLEEPER. The current
setting is shown in brackets.
2 Press the + or – button to
: SELECT
: ADJUST MENU : CLOSE
select a sleep timer value from
the following: OFF, 30, 60, 90,
or 120 minutes
You can also press SLEEP on the
remote control to select OFF, 30, 60,
90 or 120 minutes. The setting
appears on the TV screen.
The remaining time is updated every
1 minute on the display.
79
Time
This setting allows you to set the system time.
MISCELLANEOUS
WIDE
16 : 9
ENGLISH
LANGUAGE
OFF
SLEEPER
TIME
RETURN
1 Press the S or T button to
select TIME.
2 Press the + button to change
the time.
: SELECT
TIME SETTING
HOUR
MINUTE
RETURN
: ADJUST MENU : CLOSE
3 Press the S or T button to
2
12
select HOUR. Press the + or –
button to increase or decrease
the hour.
: SELECT
: ADJUST MENU : CLOSE
4 Press the S or T button to
select MINUTE. Press the + or
– button to increase or
decrease the minutes.
80
12
Taking Care of Your TV
Taking Care of Your TV
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
GAS
OIL
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
If your TV model has leather components, wipe
the leather parts with a dry cloth and keep the
area dry. Place the TV far from sources of steam
to avoid making the leather wet.
Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.
Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.
81
13
Troubleshooting
Troubleshooting
Situation
Solution
•
•
•
No picture and sound.
•
•
•
No picture, or poor picture, sound is
OK.
Picture is not in color.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus. See
“Brightness” on page 50.
•
Adjust the saturation in the OSD menus. See
“Sharpness” on page 54.
•
Press the VOLUME UP button on the control
panel or remote control.
Make sure the MTS option is set to MAIN.
Picture is OK, no sound.
•
One of the speakers has no sound.
Can’t receive some TV channels
using cable TV.
Want to reset TV settings.
•
Adjust the balance in the OSD menus. See
“Balance” on page 62.
•
Try the Auto Program function in the TV Settings menu. See “Auto Scan” on page 68.
•
Use the Preset function in the OSD Picture and
Audio menu.
•
If OSD items are colored light blue, it means
that these settings are not available. For example, TV settings are available in TV mode
(when source is selected to be TV).
•
Make sure the video signal cable is connected
properly.
Cannot operate menus.
No image but sound available.
82
Connect the power cord properly.
Press the POWER button on the control panel
or remote control.
Press the SOURCE button to cycle through
connected video sources.
Press the CHANNEL UP or CHANNEL DOWN
buttons to switch to other TV stations.
Check the TV/CATV OSD settings. See
“TV/CATV” on page 66.
Make sure all cables are connected properly.
Situation
Solution
•
No sound but have image.
•
•
•
Screen image turns over.
•
Make sure the video signal cable is connected
properly.
•
Adjust the location of the antenna, placing it as
far as possible from roads or sources of interference.
Check the antenna and the video signal line
connections.
Snow appears on the screen.
•
Blurred or overlapped images.
Make sure the source device is functioning
properly.
Set the volume to a higher level.
Make sure the audio cable is connected
securely.
Turn the mute off.
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or change
the video signal cable.
83
14
Specifications
Specifications
ST59-23A1
LCD Panel Size
23-inch TFT
Aspect Ratio
15:9
Display Resolution
1024 (horizontal) x 768 (vertical)
TV System
NTSC
Video System
AV1: Component Video (RCA jack, YPBPR)
AV2: Composite Video (RCA jack; yellow + S-Video)
AV3: Composite Video (RCA jack)
AV4: Composite Video (RCA jack; yellow + S-Video)
Component Format
480i, 480p, 576i, 576p, 720p, 1080i
Audio System
AV1, AV2, AV3, AV4: L/R RCA jacks (audio input)
8 mm line in jack (audio input)
3.5 mm headphone and L/R line out jacks (audio output)
Built-in stereo audio amplifier
7.5W + 7.5W
Power Supply
100~240 V, 50/60 Hz, 20V DC
Power Consumption
< 150 W
Weight (including base)
12 KG
Dimensions (including base)
648 mm (H) x 568.5 mm (W) x 212 mm (D)
84
PIP Operation Mode
The following table shows which main sources are compatible with
PIP and POP sources.
Main Source
AV1
(YP BPR or YCB CR )
AV2 (S or CVBS)
AV3(CVBS)
AV4 (S or CVBS) “Front”
TV
PC
PIP Source
POP Source
AV2
—
AV3
—
AV4
—
TV2
—
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
85
Computer Compatibility Chart
The following table shows resolution and frequency values supported
by the TV.
Resolution
640 X 400
720 X 400
640 X 480
800 X 600
832 X 624
1024 X 768
86
Frequency
Remarks
70 Hz
—
70 Hz
—
85 Hz
—
60 Hz
—
67 Hz
Mac
72 Hz
—
75 Hz
—
85 Hz
—
56 Hz
—
60 Hz
—
72 Hz
—
75 Hz
—
75 Hz
Mac
60 Hz
—
70 Hz
—
75 Hz
—
75 Hz
Mac
15
Glossary
Aspect Ratio The ratio of width to height of a film, image or display screen.
BBE A proprietary audio enhancement technology. BBE compensates for distortion
common to loudspeakers.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic
waves to distribute television channels to viewers (standard TV broadcast).
CATV Community Antenna Television, the original name for cable TV. A television
distribution system that uses coaxial cable instead of the traditional radio broadcasting (over-the-air) method to deliver television, FM radio, and other services to
consumers.
Color Temperature Adjusting the color temperature enables you to set the intensity of white light. Color temperature is measured in Kelvin (K). Higher color temperatures result in a red tint. Lower temperatures result in a blue tint.
EALA 3D surround sound enhancement technology that provides a more immersive and realistic soundscape.
Hue Colors in a color system are measured by hue, saturation and luminance.
Hue indicates the predominant color.
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules
(liquid crystals) that flow like liquid and bend light.
MTS Multi-channel Television Sound. Enables reception of audio other than the
primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,
while SAP (Second Audio Program) enables reception of a separate channel that
may be a different language or completely different information such as the news.
Saturation Chromatic purity indicating the amount of white contained in a color.
Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.
S-Video Super-video, a video cabling standard used to transmit video by keeping
brightness (Y) and color information (C) on separate channels. Most often used
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pictures.
TRUSURROUND 3D sound experience using audio surround technology that
delivers virtual surround sound experience through any two speaker system, including internal television speakers and headphones.
VCD A compact disk format developed in 1993 by Sony and Philips to capture fullmotion video. A standard Video CD can hold 74 minutes of near VHS-quality video
and CD-quality sound.
87
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement