Hannspree T232 User manual

Hannspree T232 User manual
GK
Unit 6 2/F No
23" Liquid Crystal Display
Television
G L M T ED
Hung To Road
Kwun Tong Kowloon Hong Kong
234
3822
234
3790
T232
MAK-000025
User's Manual
Table of Contents
1.
2.
3.
4.
5.
Regulatory Information ............................................................ 3
Description of Warning Symbols .............................................. 5
Safety Notices ........................................................................ 6
Preface ................................................................................. 13
Introducing the TV ................................................................. 15
Features ........................................................................... 15
6. Checking Package Contents .................................................. 16
7. Getting Started ..................................................................... 17
Control Panel ................................................................... 17
Input and Output Jacks ..................................................... 18
Remote Control ................................................................ 20
Inserting the Remote Control Batteries .............................. 23
8. Making Connections .............................................................. 25
Connecting to an Antenna or Cable TV .............................. 25
Connecting to AV Devices ................................................. 26
Connecting to a VCR/VCD/DVD Player
Using Component Video ........................................................ 26
Connecting to a VCR/VCD/DVD Player Using S-Video ............ 27
Connecting to a VCR/VCD/DVD Player
Using Composite Video .......................................................... 28
Connecting to a Video Camera Using S-Video ........................ 29
Connecting External Earphones ........................................ 30
Connecting an Amplifier of Speakers ................................. 31
Connecting to a PC ........................................................... 32
Connecting the Power Adapter .......................................... 33
Inserting a Compact Flash Card (CF card) ......................... 34
9. Using the TV ......................................................................... 35
Using the Remote Control ................................................. 35
Turning the TV On and Off ................................................ 35
Selecting Channels ........................................................... 35
Switching Source Signals .................................................. 35
Adjusting the Volume ........................................................ 36
Using PIP and POP ........................................................... 36
Using the Flash card Feature ............................................ 38
Starting Flash card ................................................................ 38
Remote Control Keys ............................................................. 39
Viewing Photos ..................................................................... 40
Zooming and Panning .................................................... 40
Rotating Images ............................................................ 41
Viewing a Slide Show .................................................... 41
Listening to Music ................................................................. 42
Watching Videos ................................................................... 43
Viewing CF Card Files ........................................................... 43
Using the Setup Menus ..................................................... 44
Music Setup .......................................................................... 44
1
Table of Contents
Slide Show Setup .................................................................. 44
Movie Setup .......................................................................... 45
Preferences ........................................................................... 45
10. Adjusting On-Screen Display (OSD) Settings ......................... 46
OSD Setting Menu ............................................................ 46
Picture Setting .................................................................. 47
Brightness ............................................................................. 48
Contrast ................................................................................ 49
Hue ....................................................................................... 50
Saturation ............................................................................. 51
Sharpness ............................................................................. 52
Backlight (PC mode) .............................................................. 53
Black Level ........................................................................... 54
Color Temperature ................................................................ 55
Preset ................................................................................... 56
Audio Setting .................................................................... 57
Treble ................................................................................... 58
Bass ..................................................................................... 59
Balance ................................................................................. 60
BBE, TruSurround, and EALA ................................................ 61
Earphone .............................................................................. 62
Preset ................................................................................... 63
TV Setting ........................................................................ 64
System .................................................................................. 65
Ch Skip ................................................................................. 65
Auto Program ........................................................................ 66
Fine Tune .............................................................................. 66
MPX ...................................................................................... 67
Favorite Channel ................................................................... 68
PC Setting ........................................................................ 69
Phase ................................................................................... 70
Clock .................................................................................... 71
Auto Adjustment .................................................................... 72
Horizontal Position ................................................................ 72
Vertical Position .................................................................... 73
DOS Mode ............................................................................ 74
Miscellaneous Setting ....................................................... 75
Wide ..................................................................................... 76
Language .............................................................................. 76
Sleeper ................................................................................. 77
Time ..................................................................................... 78
11. Taking Care of Your TV & Remote Control ............................. 79
12. Troubleshooting .................................................................... 80
13. Warranty and Service ............................................................ 82
14. Specifications ....................................................................... 83
PIP Operation Mode .......................................................... 84
15. Glossary ............................................................................... 85
2
1
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Additional Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
WARNING: The Federal Communications Commission warns that
changes or modifications of the TV not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
1. applies only to products purchased in the United States of America
3
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council
Directive on the approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (89/336/EEC) and the
Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC)
and the Amendment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
4
2
Description of Warning Symbols
Before You Proceed
1. Read all Safety Notices in Section 3 of this manual and
instructions in the User’s Manual carefully before either plugging
in or turning the TV on.
2. Keep this User’s Manual in a safe place for future reference.
Keep the box and packaging in case the TV needs to be shipped
in the future.
3. Follow the TV and warning label instructions.
4. Any uses, operations, changes, alterations or modifications of
the TV that do not follow the instructions in this manual will void
this TV’s warranty.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert
users to pay attention to
important descriptions
regarding usage, maintenance
(repair), and additional
important information related
to this TV.
This symbol is used to alert
users to the risk of electric
shocks due to dangerous and
uninsulated components.
5
3
Safety Notices
Electric Power Notice
Electric power may cause personal injury and mechanical damage if
misused. Although safety has been taken into consideration during the
design and production of this TV, electric shock or fire can result if the
TV is misused. To prevent potential danger, read and follow the
instructions and warnings contained in this manual when setting up,
operating or cleaning the TV. In addition, please read all “Safety
Notices” contained in this manual carefully before using the TV.
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this TV's plug or leaves the plug
exposed.
2. This TV has a 3-pin grounded plug. The third pin connects to
ground; do not remove it or alter it in anyway.
3. If the power cord or plug is damaged or worn, unplug it
immediately and contact an authorized service technician for
maintenance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
6
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in a
location free from interference.
Location
Avoid prolonged exposure to sunlight or other strong sources of heat.
Leave sufficient distance between the TV and the wall to provide
enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
Power
To avoid danger of fires or electric shock, only use the adapter listed
below, which is compatible with this TV.
•
LI SHIN INTERNATIONAL ENTERPRISE CORP.:
LSE0226B20150
7
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install
in accordance with manufacturer’s
instructions.
8
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
8
11 Only use attachments/accessories specified
by the manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION
These servicing instructions are for use by
qualified service personnel only.To reduce
the risk of electric shock, do not perform any
servicing other than that contained in the
operating instructions unless you are
qualified to do so.
9
Personal Safety
To avoid overloading the power supply, never
plug too many electrical devices into an outlet,
power strip, or extension cable.
Dangerous high-voltage electric power
components are located inside the TV. To avoid
electric shock, do not disassemble the TV in any
way.
Do not place or drop metals, small objects, or
flammable materials into the vent of the TV.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and contact an authorized service technician.
If any fluid is sprayed or dropped into the TV,
contact an authorized service technician.
The screen of the TV is made of glass. Avoid
hitting or scraping it. If the screen is broken, do
not touch the broken glass.
Do not allow children to use the TV unattended.
10
Installation
Do not place the TV in locations where there is
excessive steam or dust.
Avoid blocking the TV's vents, do not place the
TV on a bed, sofa, carpet, or in a sealed cabinet.
Install the outdoor antenna (not included) away
from power transmission lines to avoid possible
danger.
Unplug the power cord and antenna connector
when there is a storm or when the TV is not in
use for long periods to avoid electric shock from
lightning.
11
Operation
V
This TV is designed for home power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
The plug can be inserted into an outlet in only
one direction. Do not alter the plug. Contact an
authorized service technician if you cannot plug
it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this
manual, contact an authorized service technician
immediately. Do not attempt any methods not
covered in this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Contact an authorized service technician. Ask
the service technician to complete a safety
inspection before switching the power on after
completing any maintenance.
12
4
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television
(LCD TV). Your new TV will allow you to enjoy superior audio and video
while enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using
or operating your TV. To ensure the safe and correct installation and
operations of the TV, it is important that the safety and operation
instructions in this manual are followed.
This instruction manual is designed to assist you in setting up and using
the TV. The information in this manual has been carefully checked for
accuracy; however, no guarantee is given to the correctness of the
contents. The information in this manual is subject to change without
notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”)
shall not be liable for direct, indirect, special, exemplary, incidental or
consequential damages arising from any defect or omission in this
manual, even if advised of the possibility of such damages in advance.
13
Copyright
© Copyright 2005 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and
distributed under licenses restricting its use, copying and distribution.
No part of this manual may be reproduced in any form by any means
without the prior written authorization of Hannspree. The TV described
in this manual may include copyrighted software of Hannspree (or other
third parties). Hannspree (or other third parties) preserves the exclusive
rights for copyrighted software, such as the right to distribute or
reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the
product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written
authorization of Hannspree (or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree.
All other product names, trademarks or logos mentioned herein are
used for identification purpose only, and may be the trademarks or
registered trademarks of their respective owners.
The purchase of the product described herein shall not be deemed to
grant, either directly or by implication, estoppel or otherwise, any
license under the copyrights, patents, patent applications or trademarks
of Hannspree, except for the normal, non-exclusive use that arises by
operation of law in the sale of a product.
14
5
Introducing the TV
Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe,
versatile, and easy to use. The design makes it a fun addition to any room.
You can watch PAL broadcast or cable television channels, and easily
connect a VCR, VCD or DVD player to the standard CVBS and S-Video
input ports located at the rear and/or side of the unit. You can also use the
TV as a monitor for your PC by connecting it through the DVI port.
Convenient control buttons located on the TV and a handy remote control let
you change channels, adjust the volume, and change display settings
through an easy-to-use on-screen display menu system. The built-in stereo
speakers provide full rich sound and a convenient audio output port lets you
connect to an external audio system or earphones.
Features
•
•
•
•
•
•
•
•
•
•
•
Built-in TV tuner
Audio/Video support:
– Stereo audio inputs
– Composite video inputs
– Component video input
– S-Video inputs
– 3.5 mm stereo headphone output
– DVI input
On-Screen Display (OSD) menu system
Supports multi-channel broadcasting sound system—Stereo / Mono
or bilingual languages
Built-in stereo speakers
PIP/POP
Image Enhancement Technology
– 3:2 pull down
– 3D Comb Filter
Noise Reduction
Advanced de-interlacing
Edge Enhancement
Flash card Reader (selected models only)
15
6
Checking Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or
damaged.
•
•
•
•
•
•
•
TV
User’s manual
Quick start guide
Warranty and service manual
Power cord
Power adapter
Remote control and batteries
16
7
Getting Started
Control Panel
Description
Power/
Power LED
Mute
Source
Menu
Select
channel
Icon
/
/ POWER
MUTE/
MUTE/ AUTO /
MUTE AUTO
T/SOURCE
M/MENU
channel up
/ S / CHS)
(
channel down
(
/ T / CHT)
volume up
Adjust
volume
AV5Flash card
slot
(selected
models only)
(+ / S / Vol+)
volume down
(– / T / Vol-)
Function
Turns the TV on and off.
Indicates power status.
In TV/AV mode, press this button to
mute the audio. Press this button
again to restore sound.
Selects the input source to be
displayed
(TV, PC, AV1, AV2, AV3, AV4, or
AV5).
Turns the On-Screen Display (OSD)
menu on and off.
Changes channels. Press channel
up to increase the channel number.
Press channel down to decrease the
channel number. In PC or AV mode,
press either button to return to TV
mode.
Press volume up to increase the
audio volume. Press volume down to
decrease the audio volume.
Insert a CF card into this slot to view
the contents of the CF card. Use the
Flash card feature to view the
contents. See “Using the Flash card
Feature” on page 38.
17
Input and Output Jacks
Description
Connector
Function
AV1
(R/L/PR/PB/Y)
Use the AV1 input to connect
an external device, such as a
VCR or a VCD/DVD player
with a component output.
Audio Input (R/L): red and
white audio cables.
Video Input (P R/PB/Y): video
cables.
AV2
(R/L/V/S)
Use the AV2 input to connect
an external device, such as a
VCR or a VCD/DVD player.
Audio Input (R/L): red and
white audio cables.
Video Input (V or S): yellow
(video) or S-Video cable.
AV3
(R/L/V)
Use the AV3 input to connect
an external device, such as a
VCR or a VCD/DVD player
with a composite output.
Audio Input (R/L): red and
white audio cables.
Video Input (V): yellow
(video) cable.
AV4
(S/V/L/R)
Use the AV4 input to connect
an external device, such as a
VCR or a VCD/DVD player.
Audio Input (L/R): white and
red audio cables.
Video Input (S-Video or
Video): S-Video cable or
yellow (video).
ANT (Antenna/
Cable TV line in)
Connects to an antenna or
cable television line.
18
Description
Connector
Function
DC-IN
Connects to the included
power adapter.
DVI
Connects to a PC’s DVI port.
LINE IN
Connects to a PC's line/audio
out port.
LINE OUT (R/L)
Connects to external stereo
speakers.
Earphone jack
Connects to earphones.
19
Remote Control
Description
Icon
Function
Menu
MENU
Press this button to open up the
setup menu of TV mode or flash card
mode.
Arrow
Number
Press S / T / W and X to scroll
through the on-screen display
S / T / W / X menus. In flash card mode, use the
arrow buttons to navigate menus,
and to pan a picture when zooming
in on a photo in Photo mode.
1
2
3
4
5
6
7
8
9
0
Last
CC/TTX
LAST
CC/TTX
Power
Adjust volume
20
Use to select a channel directly.
Press 0-9 to enter the channel
number (press 1 and 0 for channel
10).
Press this button to return to the last
channel selected.
Press this button to enable the
closed captions/subtitles (Only
available in the United States of
America). In flash card mode, use
this button to rotate a picture when in
Photo mode. This option may not be
available in your local area.
Turns the TV power on or off.
VOL
VOL
Press volume up to increase the
audio volume. Press volume down to
decrease the audio volume.
Description
Icon
Function
Mute
Press this button to eliminate sound.
Press mute again or press the
volume adjust buttons to restore
sound.
Select channel
Changes channels. Press channel
up to increase the channel number.
Press channel down to decrease the
channel number. In PC or AV mode,
press either button to return to TV
mode.
CH
CH
Press this button to change the
audio characteristics of the TV.
Sound
RGB
RGB
Wide
WIDE
Position
Hold
PIP/POP
POSITION
Press this button to switch to RGB
mode (PC DVI-I input) or flash card
mode.
Press this button to switch between
wide screen and other modes (4:3 –
16:9 – ANAMORPHIC).
Press this button repeatedly to cycle
through the PIP position options. In
flash card mode, use this button to
go to the next page in the menus.
HOLD
ROOT
Press this button to hold or skip
forward through tracks being played
from the memory. In flash card
mode, use this button to return to the
flash card main screen.
PIP/POP
SLIDE
Press this button to use the PIP or
POP functions. In flash card mode,
use this button to start and stop the
slide show.
21
Description
Icon
Swap
SWAP
Favorite
FAV.
Function
Press this button to swap the PIP or
POP pictures. In flash card mode,
use this button to go to the previous
page in the menus.
Press this button to select your
favorite channels.
TV
TV
Press this button repeatedly to cycle
through the TV reception options for
the TV.
AV
AV
Press this button repeatedly to cycle
through the AV-in options for the TV.
Return
Press this button to return to the last
menu when using on screen display
menus. In flash card mode, use this
button to confirm a selection or
activate a function.
Sleep
Press this button repeatedly to set
the length of time until the TV turns
off. Cancel the timer by pressing
until the displayed time disappears.
In flash card mode, use this button to
zoom in on a picture when in Photo
mode.
Display
22
SLEEP
DISP.
Press this button to show messages
on the screen, such as the channel
number, mode and others. Press this
button again to close the displayed
message.
Inserting the Remote Control Batteries
1 Open the battery compartment cover at the
back of the remote control (A).
2 Insert the batteries paying attention to the
polarity markings inside the battery
A
B
compartment (B).
3 Replace the battery compartment cover
(C).
C
23
CAUTION
•
•
•
•
•
•
•
24
If the remote control is not used for a long period, remove the batteries
and store them separately.
Handle damaged or leaking batteries carefully, and wash hands after
such handling.
If your remote control has two batteries, do not mix new and old
batteries because the life of the new batteries will be shortened.
Chemical fluids may leak from the old batteries.
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
The remote control may have a magnet in it, so do not place magnetic
sensitive items such as watches, credit cards, or flash media close to
the cover.
Do not use force when pulling the remote control cover open; you may
damage the hinge.
8
Making Connections
Connecting to an Antenna or Cable TV
1 Connect one end of the VHF/UHF (Antenna) or cable to ANT Jack
(VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or cable to the
antenna socket or cable.
Antenna
ANT
ANT jack
(VHF/UHF IN jack)
Antenna/cable
socket
Antenna/cable
coaxial cable
Note:
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Favorite Channel” on page 68.
25
Connecting to AV Devices
Connect external devices such as VCD / DVD players or VCRs to the TV
using the AV1, AV2, AV3, and AV4 ports on the back or side of the TV.
Connecting to a VCR/VCD/DVD Player Using
Component Video
The illustration presented here shows how to connect your TV to a VCR /
VCD / DVD player using the AV1 component video port. Actual connections
may vary according to the make and model of your device. Refer to the
user’s manual included with the AV device for more detailed instructions.
Note:
Location of the connectors
depends on the TV model.
VCR
VCD
DVD
AV 1
R
L
PR
PB
Y
PR
PB
Y
R
L
Video cable
Audio cable
26
Cables and connectors are color-coded
(red, white, red, blue, green).
Connecting to a VCR/VCD/DVD Player Using S-Video
The following illustration shows how to connect the TV to a VCR / VCD /
DVD player using the AV2 S-Video port. Actual connections may vary
according to the make and model of the device. Refer to the user’s manual
included with the camcorder for more detailed instructions.
AV 2
R
L
V
S
S-VIDEO
S-Video
connector
Audio cable
R
L
Audio
connectors
Video cable
Notes:
• When connecting the S-Video
connector and AV connectors at
the same time, the priority is
given to the S-Video connector.
• Location of the connectors
depends on the TV model.
Cables and connectors are color-coded
(red, white, black).
27
Connecting to a VCR/VCD/DVD Player Using
Composite Video
The illustration presented here shows how to connect your TV to a VCR /
VCD / DVD player using the AV3 composite video port. Actual connections
may vary according to the make and model of your device. Refer to the
user’s manual included with the AV device for more detailed instructions.
VCR
AV 3
R
L
VCD
V
DVD
VIDEO R
L
A/V cable
Note:
Location of the connectors
depends on the TV model.
28
Cables and connectors are color-coded
(red, white, yellow).
Connecting to a Video Camera Using S-Video
The following illustration shows how to connect the TV to a camcorder using
the AV4 S-Video port. Actual connections may vary according to the make
and model of the device. Refer to the user’s manual included with the
camcorder for more detailed instructions.
WB
S
AV 4
S
V
L
R
S-Video
connector
Audio
connectors
L
R
S-VIDEO
Video cable
Audio cable
Notes:
• When connecting the S-Video
connector and AV connectors at
the same time, the priority is
given to the S-Video connector.
• Location of the connectors
depends on the TV model.
Cables and connectors are color-coded
(white, red, black).
29
Connecting External Earphones
External earphones may be used to listen to the TV rather than using the
built-in speakers. Connect headphones to the earphone line out as
illustrated.
Earphone jack(
)
Notes:
• External earphones are not included with the TV.
• The internal TV speakers still output sound when earphones are
plugged in.
• The TV speakers function is to output the primary audio program.
The earphones function is to output the secondary audio program.
• Location of the connectors depends on the TV model.
30
Connecting an Amplifier of Speakers
Connect an external amplifier of speakers to the line out port to provide
better sound quality. Refer to the following illustration.
LINE OUT
R
L
Amplifier and speakers
R
L
Audio cable
Note:
Location of the connectors
depends on the TV model.
Cables and connectors are color-coded
(red, white).
31
Connecting to a PC
Connect the TV to your PC to use it as the monitor using the DVI port as
shown. Connect the DVI port of the TV to the DVI output of the PC. Connect
the line out port of the PC to the line in port of your TV to listen to audio from
the PC.
DVI
LINE-IN
PC
Notes:
• You can connect the line out port of a CD-ROM player, stereo, or other
device to the TV’s line in port to listen to the devices audio output.
• When changing from TV mode to PC mode, the Power LED changes to
amber, indicating that the PC is in sleep status.
• Location of the connectors depends on the TV model.
32
Connecting the Power Adapter
1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the
rear panel of the TV.
3 Insert the three-pronged plug at the other end of the power cord into
a power outlet.
Notes:
Location of the connectors
depends on the TV model.
Three-pronged
plug
Images are for illustration only
and may vary by model or
region.
DC-IN
DC-IN input jack
Power cord
Power adaptor
33
Inserting a Compact Flash Card (CF card)
1 Remove the card reader slot cover from the
side of the TV.
Note:
Step 1 depends on which TV model you
purchase. If the TV’s card reader slot does not
have a cover, you can ignore step 1 and go
straight to step 2.
S-VIDEO
LINE-OUT
L
AV1
R
L
R AUDIO
ANT
DVI
DC-IN
AV3
LINE-IN
2 Insert the CF card in the direction of the
arrow.
8 MB
S-VIDEO
T
LINE-OU
L
AV1
R
L
R AUDIO
ANT
DVI
DC-IN
AV3
LINE-IN
3 To remove the CF card, press the button.
The CF card pops out. Gently slide out the
CF card.
Note:
Selected models only.
T
S-VIDEO
LINE-OU
L
AV1
R
L
R AUDIO
ANT
DVI
DC-IN
AV3
34
LINE-IN
9
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 20 feet
(6 meters) from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at the TV.
Notes
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
Turning the TV On and Off
1 Press power on the remote control or on the control panel. The power
LED indicator on the front of the TV changes from red to green,
indicating that the power is on.
2 Press power again. The power LED changes from green to red,
indicating that the TV is off.
Selecting Channels
1 Press channel up to increase the channel number by one.
2 Press channel down to decrease the channel number by one.
3 Enter the specific channel number by pressing the number buttons on
the remote control. The channel number is displayed on the screen.
Switching Source Signals
Press source on the control panel repeatedly to select different sources.
Alternatively, press TV on the remote control to select the TV source, press
RGB to select the PC source, and press AV repeatedly to cycle through
AV1-AV5 sources.
The selected source – TV, PC, AV1, AV2, AV3, AV4 and AV5 – appear on
the top left corner of the screen in that order.
35
Notes:
• The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority
to S-Video when two signals are detected at the same time.
• AV5 appears on selected models only.
Adjusting the Volume
1 Press volume up to increase the volume.
2 Press volume down to decrease the volume.
3 Press mute to eliminate sound. The word “MUTE” appears on the
bottom right corner of the screen and sound is turned off.
4 Press mute again to restore the original volume.
Using PIP and POP
The TV features Picture-in-Picture (PIP) and Picture-outside-Picture (POP),
enabling you to view two sources at the same time. Follow these
instructions.
1 Turn on the TV and select a source
MAIN - 07
signal.
2 Press PIP/POP from the remote
control.
MAIN - 07
PIP - 56
A picture-in-picture window appears on
the display, using the last selected
source signal for the PIP.
Note:
Refer to “PIP Operation Mode” on page 84 for information on which
sources are compatible with each other in PIP and POP mode.
36
3 Press SWAP from the remote control to
switch the focus from the PIP to the
MAIN - 07
PIP - 56
main source. The PIP identification line
disappears and the PIP window border
disappears.
4 Press POSITION from the remote
control to move the PIP window to one
of the four corners of the screen as
shown.
5 Press PIP/POP to switch to
picture-outside-picture (POP) mode.
MAIN - 07
POP - 56
The two signals are displayed
side-by-side.
6 Press PIP/POP again. The screen
MAIN - 07
displays the main source signal again.
37
Using the Flash card Feature
The Flash card feature enables you to view photos, watch movies, and
listen to MP3 files on CF cards inserted in the Flash card slot (AV 5). The
following describes the Flash card feature.
Starting Flash card
1 Insert a CF card into the CF card slot (AV 5). Refer to “Inserting a
Compact Flash Card (CF card)” on page 34.
2 Use the remote control arrow buttons to switch to AV5.
The Flash card main screen
appears:
From this screen, you can choose
to view photos, listen to music,
watch videos, or look at the
contents of the CF card.
MAIN
PHOTO
AV5
FLASHCARD
MUSIC
VIDEO
FILE
Flash card main screen
3 Use the remote control arrow
buttons to select a file format,
and press enter to open the file
format page view.
Notes:
• Selected models only
• Flash card reader
- Does not support Fast CF card
- Currently the TV’s Flash card
reader only supports flash
cards from PQI, HAGIWARA,
ScanDisk, TRANSCEND, and
KINGSTON.
38
PAGE
01/04
Photo format page view
Remote Control Keys
The following table lists the remote control buttons used to operate the
Flash card feature.
Button
Flash card
Name
Function
Press these buttons to navigate
the Flash card menus.
In Photo mode, use these
buttons to pan a picture when
zooming in.
Arrow
(S / T / W / X)
Return
Enter
Press this button to confirm a
selection or to activate a
function.
Menu
Menu
Press this button to open the
setup menu.
Hold
Root
Press this button to return to the
Flash card main screen.
PIP/POP
Slide Show
Press this button to start and
stop the slide show.
Sleep
Zoom
Press this button to zoom in on
a picture. Zoom ratios are
available: 1X, 2X, 3X,4X(
Magnification will vary by input
format).
CC/TTX
Rotate
Press this button to rotate a
picture when in Photo mode.
Swap
Page Up
Press this button to go to the
previous page in the menus.
Position
Page Down
Press this button to go to the
next page in the menus.
39
Viewing Photos
1 Use the remote control arrow buttons to select PHOTO.
2 Press enter.
3 A screen appears displaying
thumbnails of images on the CF card.
4 Use the arrow buttons to select a
thumbnail image.
5 Press enter.
PAGE
01/04
6 The selected thumbnail expands to
full screen mode.
7 Press X or T to go to the next
picture. Press W or S to go to the
previous picture.
Zooming and Panning
The Flash card feature enables you to
zoom in on images and pan the view.
Follow these instructions.
1 Put an image in full screen mode as described in the previous section.
2 Press sleep on the remote control to zoom in on the image. Zoom
ratios are available: 1X, 2X, 3X,4X(Magnification will vary by input
format).
3 When zooming in on an image, press X / W / T / S on the remote
control to pan the image.
40
Rotating Images
Follow these instructions to rotate images when in Photo mode.
1 Put an image in full screen mode as described in the previous section.
2 Press CC/TTX on the remote control.
3 The image is rotated 90 degrees (90°) in a clockwise direction.
Note:
You cannot rotate an image when the image is being zoomed.
Viewing a Slide Show
Flash card has a slide show feature that enables you to view your images.
1 Press PIP/POP to start the slide show.
2
The files are viewed sequentially, and files in your music library are also
played in sequence.
Press PIP/POP again to stop/pause the slide show.
Note:
Refer to “Slide Show Setup” on page 44 to configure slide show settings
such as interval time, repeat options, and transition effects.
41
Listening to Music
1 Use the remote control arrow buttons to select MUSIC.
2 Press enter.
3
A screen appears displaying a list
of the music stored on your CF
card.
Use the arrow buttons to select
a music file. The selected file
starts playing.
When the file finishes playing, the
next file in the list is played.
MUSIC
LIBRARY
01.LE PAPILLON
02.
A
B
C
A
HOPE AND MEMORY
WE WILL ROCK YOU ??????
Repeat: One
3:08
4:37
2:52
3:29
4:27
4:32
1:45
2:30
Page: 01/01
4 Press enter to open the Music
Equalizer screen. This screen
enables you to view information
about the file you are playing.
Note
Refer to “Music Setup” on page 44
for information on changing the
Repeat mode setting.
00:01:11
MUSIC
Name:
Araist:
Time:
60
AA
3:29
150
Repeat: All
42
EQUALIZER
Type:
400
1K
EQ:standard
2K
6K
MP3
15K
Song: 001/008
Watching Videos
1 Use the remote control arrow buttons to select VIDEO.
2 Press enter.
3 A screen appears displaying
thumbnails of the videos on your
CF card.
4 Use the arrow buttons to select
a video file.
5 Press enter. The selected video
file begins playing.
PAGE
01/01
Note:
Refer to “Movie Setup” on page 45 for information on setting Movie
playback settings such as the interval time and repeat mode.
Viewing CF Card Files
1 Use the remote control arrow buttons to select FILE.
2 Press enter.
3
A screen appears displaying a list of the files on your CF card. The file
type is denoted by the icons, and the file size, creation date, and
thumbnail view of the file provides additional information.
Use the arrow buttons to select a file and press Enter. The selected
file is displayed or played.
43
Using the Setup Menus
From the Flash card main screen,
press menu to enter the SETUP
MENU MAIN PAGE.
Use the arrow buttons to select a
menu item and press enter to open
the selected item. Select EXIT
SETUP and press enter to leave the
setup menu.
SETUP MENU
MAIN PAGE
MUSIC SETUP
SLIDE SHOW SETUP
MOVIE SETUP
PREFERENCES
EXIT SETUP
GENERAL SETUP
After making your selections in the
submenus, use the arrow buttons to
select MAIN PAGE and press enter to return to the SETUP MENU MAIN
PAGE.
Music Setup
•
Repeat Mode: Use the arrow buttons to select REPEAT MODE.
Repeat mode has the following options:
– ONE: repeats one MP3 file
– ALL: repeats all files in sequence
– OFF: turns repeat mode off
Slide Show Setup
•
•
•
Folder Repeat: Use the arrow buttons to select FOLDER REPEAT.
Folder Repeat mode has the following options:
– ON: runs the slide show again in the selected folder.
– OFF: turns the folder repeat mode off.
Interval Time: Use the arrow buttons to select INTERVAL TIME. Set
the interval time to 1, 3, 5, or 10 seconds.
Transition: Use the arrow buttons to select TRANSITION and select
a transition from the list.
44
Movie Setup
Select MOVIE SETUP and press enter to display the movie setup menu.
•
•
Interval Time: Use the arrow buttons to select INTERVAL TIME.
Interval time mode has the following options:
– FAST: sets an increased interval speed between playback.
– NORMAL: sets the interval time to normal.
Repeat Mode: Use the arrow buttons to select REPEAT MODE.
Repeat mode has the following options:
– OFF: turns the repeat mode off.
– ONE: repeats playback of selected movie.
– ALL: repeats playback of all movies in the folder.
Preferences
Select PREFERENCES and press Enter to display the preferences menu.
•
•
•
TV Type: Use the arrow buttons to select TV TYPE. TV type mode
has the following options:
– MULTI.SYSTEM: enables the system to automatically select the
standard (either NTSC or PAL).
– NTSC: sets the television standard to NTSC.
– PAL: sets the television standard to PAL.
Video Output: Use the arrow buttons to select VIDEO OUTPUT.
Video output mode has the following option:
– S-VIDEO: sets the video output to S-VIDEO.
Defaults: Use the arrow buttons to select DEFAULTS. Select
RESET and press enter to reset the Flash card settings to default
values.
45
10
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple
method to adjust your TV's setting. This chapter describes how to change
each of the available settings. The OSD menu can be accessed through
either the control panel or the remote control.
Function
Control Panel Icon
Function
Remote Control Icon
Menu
M/MENU
Menu
MENU
Select OSD
item
S/T
Select
CH (
OSD item
/
/ T/S)
Enter
VOL(+ / – / S / T)
Enter
W/X
Adjust
VOL(+ / – / S / T)
Adjust
W/X
The following sections explain how to adjust settings in the OSD menus
using the remote control.
OSD Setting Menu
MAIN MENU
PICTURE
AUDIO
Press menu to enter the OSD
Main Menu screen.
The Main Menu appears.
TV
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
Notes:
• Press menu to open and close the OSD menu at any time.
• Alternatively, select the EXIT option in the menu to return to the
previous menu.
46
Picture Setting
MAIN MENU
PICTURE
AUDIO
Press menu to enter the OSD
Main Menu screen.
1 Press W or X to enter the
PICTURE Menu.
TV
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
Notes:
• You can control the OSD with either the remote control or the control
panel.
• PC picture mode and TV picture mode have different menu items; PC
picture mode includes a Backlight adjustment.
47
Brightness
Use this control to adjust the brightness of the screen image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 The slider bar shows the current
setting.
2 Press X to increase the
brightness.
3 Press W to decrease the
brightness.
Note:
The new setting is confirmed
immediately.
BRIGHTNESS
48
MIN
MID
MAX
0
50
100
Contrast
Use this control to adjust the contrast of the screen image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select CONTRAST.
2
3
The slider bar shows the current
setting.
Press X to increase the contrast.
Press W to decrease the contrast.
Note:
The new setting is confirmed
immediately.
CONTRAST
MIN
MID
MAX
0
50
100
49
Hue
Use this control to adjust the ratio of colors in the screen image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
BLACK LEVEL
50
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select HUE. The slider
bar shows the current setting.
2 Press X to increase the hue.
3 Press W to decrease the hue.
Notes:
• The new setting is confirmed
immediately.
HUE
•
50
MIN
MID
MAX
0
50
100
Hue cannot be adjusted when
viewing a PAL signal in TV mode
or AV mode. Hue can be adjusted
when viewing an NTSC signal in
AV mode.
Saturation
Use this control to adjust the density of the colors in the screen image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select SATURATION.
2
3
The slider bar shows the current
setting.
Press X to increase the saturation.
Press W to decrease the
saturation.
Note:
The new setting is confirmed
immediately.
SATURATION
MIN
MID
MAX
0
50
100
51
Sharpness
Use this control to adjust the sharpness of the screen image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select SHARPNESS.
2
3
The slider bar shows the current
setting.
Press X to increase the
sharpness.
Press W to decrease the
sharpness.
Note:
The new setting is confirmed
immediately.
SHARPNESS
52
MIN
MID
MAX
0
1
7
Backlight (PC mode)
Use this control to adjust the intensity of the screen backlight. This control is
only for use in PC mode.
PICTURE
BRIGHTNESS
CONTRAST
BACKLIGHT
COLOR TEMP
PRESET
RETURN
1 Press T to select BACKLIGHT. The
50
50
100
STD
OFF
slider bar shows the current setting.
2 Press X to increase the backlight
intensity.
3 Press W to decrease the backlight
intensity.
: SELECT
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
BACKLIGHT
MIN
MID
MAX
0
50
100
Default - 100
53
Black Level
Use this control to adjust the intensity of the black elements of the screen
image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select BLACK LEVEL.
2
3
The slider bar shows the current
setting.
Press X to increase the black
level.
Press W to decrease the black
level.
Note:
The new setting is confirmed
immediately.
BLACK LEVEL
54
MIN
MID
MAX
0
50
100
Color Temperature
Use this control to adjust the color temperature of the screen image. A warm
setting will result in an image with a predominantly red hue. A cold setting
will result in a bluer image.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select COLOR TEMP.
2 Press W or X to change the color
•
•
•
temperature. The current setting
is shown in brackets. The
following options are available:
STD – for standard color settings.
WARM – for color settings with
red as the dominant color.
COLD – for color settings with
blue as the dominant color.
Notes:
• The new setting is confirmed
immediately.
• The default color temperature is
STD.
55
Preset
Use this function to reset all settings to factory defaults.
PICTURE
BRIGHTNESS
50
CONTRAST
50
50
HUE
SATURATION
50
SHARPNESS
1
50
BLACK LEVEL
COLOR TEMP
STD
PRESET
OFF
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select PRESET. The
2
current setting is shown in
brackets.
Press W or X. “ON” appears in
the brackets. All picture settings
are returned to the factory-set
default values.
Note:
The preset function erases all of
your custom picture settings.
56
Audio Setting
Press menu to enter the OSD
Main Menu screen.
1 Press T to select AUDIO.
2 Press W or X to enter the
AUDIO Menu.
MAIN MENU
PICTURE
AUDIO
TV
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
Note:
You can control the OSD with either the remote control or the control
panel.
57
Treble
Use this control to adjust the level of audio treble produced by the TV.
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 The slider bar shows the current
108
108
OFF
ON
OFF
setting.
2 Press X to increase the treble.
3 Press W to decrease the treble.
20
OFF
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
TREBLE
58
MIN
MID
MAX
0
108
216
Bass
Use this control to adjust the level of audio bass produced by the TV.
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press T to select BASS. The slider
108
108
OFF
ON
OFF
bar shows the current setting.
2 Press X to increase the bass.
3 Press W to decrease the bass.
20
OFF
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
BASS
MIN
MID
MAX
0
108
216
59
Balance
Use this control to alter the audio balance between left and right speakers.
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press T to select BALANCE. The
108
108
2
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
3
slider bar shows the current
setting.
Press X to shift the balance to
the right speaker.
Press W to shift the balance to
the left speaker.
Note:
The new setting is confirmed
immediately.
60
BBE, TruSurround, and EALA
Use these controls to set the audio output characteristics for the TV.
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press S or T to select BBE,
108
108
OFF
ON
OFF
20
OFF
: ADJUST MENU : CLOSE
2
TruSurround, or EALA. The
current setting is shown in
brackets.
Press W or X to select a setting
for each effect:
– BBE: OFF, HIGH, LOW
– TruSurround: OFF, ON
– EALA: OFF, ON
Note:
Only one sound effect can be
selected at a time.
61
Earphone
Use this control to set the earphone output volume.
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press T to select EARPHONE.
108
108
OFF
ON
OFF
2
20
OFF
: ADJUST MENU : CLOSE
3
The slider bar shows the current
setting.
Press X to increase the earphone
volume.
Press W to decrease the
earphone volume.
Note:
The new setting is confirmed
immediately.
EARPHONE
62
MIN
MID
MAX
0
20
50
Preset
Use this control to reset all settings to factory defaults.
AUDIO
TREBLE
BASS
BALANCE
BBE
TruSurround
EALA
EARPHONE
PRESET
RETURN
: SELECT
1 Press T to select PRESET. The
108
108
OFF
ON
OFF
2
20
OFF
: ADJUST MENU : CLOSE
current setting is shown in
brackets.
Press W or X. “ON” appears in
the brackets. All audio settings
are returned to the factory-set
default values.
Note:
The preset function erases all of
your custom audio settings.
63
TV Setting
Press menu to enter the OSD
Main Menu screen.
1 Press T to select TV.
2 Press W or X to enter the
TV Menu.
MAIN MENU
PICTURE
AUDIO
TV
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
Notes:
• Operate the OSD with either the remote control or the control panel.
• The TV OSD menu is not available if the input source is not TV.
64
System
Use this control to determine the PAL signal type.
1 The current setting is shown in
TV
SYSTEM
B/G
CH SKIP
AUTO PROGRAM OFF
FINE TUNE
STEREO
MPX
FAV. CHANNEL
RETURN
: SELECT
brackets.
2 Press W or X to select from
AUTO, B/G, D/K, or I.
: ADJUST MENU : CLOSE
Ch Skip
Use this control to define which channels should be skipped when scrolling
through the channels with the channel up and channel down buttons.
TV
B/G
SYSTEM
CH SKIP
AUTO PROGRAM OFF
FINE TUNE
STEREO
MPX
FAV. CHANNEL
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select CH SKIP.
2 Press W or X to display the
CH SKIP submenu.
3 Press W or X to select a
channel.
4 Press T to select CH SKIP. The
5
CH SKIP
CHANNEL
CH SKIP
RETURN
: SELECT
1
OFF
current setting is shown in
brackets.
Press W or X to select OFF or
ON.
: ADJUST MENU : CLOSE
65
Auto Program
Use this control to scan all the available channels and assign a channel
number to each.
TV
B/G
SYSTEM
CH SKIP
AUTO PROGRAM OFF
FINE TUNE
STEREO
MPX
FAV. CHANNEL
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select AUTO
2
PROGRAM. The current setting is
shown in brackets.
Press W or X to initiate a
channel scan. A progress bar
and a percentage figure show the
progress of the operation.
Fine Tune
Use this control to fine tune individual channels for the best possible
reception.
TV
B/G
SYSTEM
CH SKIP
AUTO PROGRAM OFF
FINE TUNE
STEREO
MPX
FAV. CHANNEL
RETURN
: SELECT
: ENTER
MENU : CLOSE
1 Press T to select FINE TUNE.
2 Press W or X to display the
FINE TUNE submenu.
3 Press W or X to select a channel
to tune.
4 Press T to select FREQUENCY.
5 Press W or X to adjust the
frequency of the channel.
FINE TUNE
CHANNEL
10
FREQUENCY 471.25 MHZ
RETURN
: SELECT
66
: ADJUST MENU : CLOSE
MPX
Use this control to determine the audio output.
TV
B/G
SYSTEM
CH SKIP
AUTO PROGRAM OFF
FINE TUNE
STEREO
MPX
FAV. CHANNEL
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select MPX. The
2
•
•
•
•
•
•
current setting is shown in
brackets.
Press W or X to select from the
various MPX options:
STEREO – enables stereo output
when viewing programs broadcast
in stereo.
I / II – enables you to select
language output options. You can
select one of two languages to be
output.
MONO – selects a monophonic
audio signal. Select this to
reduce noise that is present in
weak stereo broadcasts.
The following options are allowed
according to the broadcast
signal:
STEREO, MONO
I, II, MONO
MONO, MONO
Notes:
• Select mono sound mode if the
signal is not clear or if you are in
areas with poor signal reception.
• Stereo and I II modes are
available only if included with the
broadcast signal.
67
Favorite Channel
Use this control to set favorite channels.
TV
B/G
SYSTEM
CH SKIP
AUTO PROGRAM OFF
FINE TUNE
STEREO
MPX
FAV. CHANNEL
RETURN
: SELECT
: ENTER
MENU : CLOSE
1 Press T to select
FAV. CHANNEL.
2 Press W or X to display the
FAV. CHANNEL submenu.
3 Press S or T to set 4 favorite
channels.
4 Press W or X to choose a
channel to assign to the favorite
channel number you selected in
step 3.
FAV.CHANNEL SETTING
CHANNEL 1
1
CHANNEL 2
2
CHANNEL 3
3
CHANNEL 4
4
RETURN
: SELECT
: ADJUST MENU : CLOSE
Note:
Assigning a channel to one of the
four favorite channel numbers
replaces a previously stored channel
assignment.
68
PC Setting
Press menu to enter the OSD
Main Menu screen.
1 Press T to select PC.
2 Press W or X to enter the
PC Menu.
MAIN MENU
PICTURE
AUDIO
PC
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
Notes:
• Operate the OSD with either the remote control or the control panel.
• The PC OSD menu is not available if the input source is not PC.
69
Phase
Use this control to adjust the computer image on your TV screen.
PC
PHASE
CLOCK
AUTO ADJ .
H POSITION
V POSITION
DOS MODE
RETURN
: SELECT
1 The slider bar shows the current
50
50
OFF
50
50
GRAPHIC
setting.
2 Press W or X to adjust the phase
setting.
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
PHASE
70
MIN
MID
MAX
0
50
100
Clock
Use this control to adjust the computer image on your TV screen.
PC
PHASE
CLOCK
AUTO ADJ .
H POSITION
V POSITION
DOS MODE
RETURN
: SELECT
1 Press T to select CLOCK. The
50
50
OFF
50
50
GRAPHIC
2
slider bar shows the current
setting.
Press W or X to adjust the clock
setting.
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
CLOCK
MIN
MID
MAX
0
50
100
71
Auto Adjustment
Use this control to adjust the computer image on your TV screen
automatically.
PC
PHASE
CLOCK
AUTO ADJ .
H POSITION
V POSITION
DOS MODE
RETURN
: SELECT
1 Press T to select AUTO ADJ. The
50
50
OFF
50
50
GRAPHIC
2
: ADJUST MENU : CLOSE
current setting is shown in
brackets.
Press W or X to enable the Auto
Adjustment function. The display
is automatically configured to
match the computer display
properties.
Horizontal Position
Use this control to adjust the horizontal position of the computer image on
your TV screen.
PC
PHASE
CLOCK
AUTO ADJ .
H POSITION
V POSITION
DOS MODE
RETURN
: SELECT
1 Press T to select H POSITION.
50
50
OFF
50
50
GRAPHIC
2
The slider bar shows the current
setting.
Press W or X to adjust the
horizontal position.
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
H POSITION
72
MIN
MID
MAX
0
50
100
Vertical Position
Use this control to adjust the vertical position of the computer image on your
TV screen.
PC
PHASE
CLOCK
AUTO ADJ .
H POSITION
V POSITION
DOS MODE
RETURN
: SELECT
1 Press T to select V POSITION.
50
50
OFF
50
50
GRAPHIC
2
The slider bar shows the current
setting.
Press W or X to adjust the vertical
position.
: ADJUST MENU : CLOSE
Note:
The new setting is confirmed
immediately.
V POSITION
MIN
MID
MAX
0
50
100
73
DOS Mode
Use this control to display computer text, but not graphics, on your TV
screen.
PC
PHASE
CLOCK
AUTO ADJ .
H POSITION
V POSITION
DOS MODE
RETURN
1 Press T to select DOS MODE. The
50
50
OFF
50
50
GRAPHIC
2
•
: SELECT
: ADJUST MENU : CLOSE
•
74
current setting is shown in
brackets.
Press W or X to toggle the setting
between TEXT and GRAPHIC.
TEXT - Select this option when
using DOS at the command line.
GRAPHIC - Select this option
when using DOS based graphical
programs.
Miscellaneous Setting
Press menu to enter the OSD
Main Menu screen.
1 Press T to select
MISCELLANEOUS.
2 Press W or X to enter the
MISCELLANEOUS Menu.
MAIN MENU
PICTURE
AUDIO
TV
MISCELLANEOUS
EXIT
: SELECT
: ENTER
MENU : CLOSE
Note:
Operate the OSD with either the remote control or the control panel.
75
Wide
Use this control to set the aspect ratio of the screen.
MISCELLANEOUS
WIDE
16 : 9
LANGUAGE
ENGLISH
OFF
SLEEPER
TIME
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 The current setting is shown in
brackets.
2 Press W or X to select the
•
•
•
screen format from the following:
16:9
ANAMORPHIC
4:3
Language
Use this control to set the OSD display language.
MISCELLANEOUS
WIDE
16 : 9
ENGLISH
LANGUAGE
OFF
SLEEPER
TIME
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select LANGUAGE.
2
The current setting is shown in
brackets.
Press W or X to select the
language from the following:
•
ENGLISH
•
中文
Note:
The default language setting is 中文 .
76
Sleeper
Use this control to turn the TV off automatically after a set time.
MISCELLANEOUS
WIDE
16 : 9
ENGLISH
LANGUAGE
OFF
SLEEPER
TIME
RETURN
: SELECT
: ADJUST MENU : CLOSE
1 Press T to select SLEEPER. The
2
current setting is shown in
brackets.
Press W or X to select a sleep
timer value from the following:
•
•
•
•
•
OFF
30
60
90
120
You can also press SLEEP on the
remote control to select OFF, 30, 60,
90 or 120 minutes. Press Display; the
setting appears on the TV screen.
The remaining time is updated every
1 minute on the display.
77
Time
This control enables you to set the system time.
1 Press T to select TIME.
2 Press W or X to display the TIME
submenu.
3 Press W or X to increase or
decrease the hour setting.
4 Press T to select MINUTE. Press
W or X to increase or decrease
the minute setting.
78
11
Taking Care of Your TV & Remote
Control
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
GAS
OIL
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to disconnect the power plug
correctly. Hold the plug. Do not attempt to
disconnect the plug by pulling on the power cord.
Arrange and store the power cord neatly as
shown to the left to avoid knotting or bending
which may cause fire due to damage or electric
leakage.
Note
Protect the remote control from shock or vibration to avoid damage.
Do not place the remote control in hot or humid locations.
79
12
Troubleshooting
Situation
Solution
•
•
•
No picture and sound.
•
•
•
No picture, or poor picture, sound is OK.
Picture is not in color.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus.
See “Brightness” on page 48.
•
Adjust the saturation in the OSD menus.
See “Saturation” on page 51.
Make sure all cables are connected
properly.
•
•
•
Picture is OK, no sound.
•
•
•
•
One of the speakers has no sound.
Cannot receive some TV channels using
cable TV.
Want to reset TV settings.
80
Connect the power cord properly.
Check if the power LED is on or not.
Press power on the control panel or remote
control.
Press source to cycle through connected
video sources.
Press channel up or channel down to
switch to other TV stations.
Make sure all cables are connected
properly.
•
Make sure the source device is functioning
properly.
Make sure the audio cable is connected
securely.
Turn the mute off.
Press volume up on the control panel or
remote control.
Make sure the MPX option is set to
STEREO, I II, or MONO. See “MPX” on
page 67.
Adjust the balance in the OSD menus. See
“Balance” on page 60.
Make sure the audio cable is connected
securely.
•
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Program” on
page 66.
•
Use the Reset function in the OSD menu.
See “Taking Care of Your TV & Remote
Control” on page 79.
Situation
Cannot operate menus.
Screen image turns over.
Snow appears on the screen.
Blurred or overlapped images.
Remote control doesn’t work.
Solution
•
The system is in a state such that those
settings are not available.
•
Make sure the video signal cable is
connected properly.
•
Adjust the location of the antenna, placing it
far from roads or sources of interference.
Check the antenna and the video signal line
connections.
•
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or
change the video signal cable.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote
control and the sensor is clear.
Try operating the remote control at a closer
distance to the TV. Refer to “Using the
Remote Control” on page 35.
•
81
13
Warranty and Service
For complete warranty service information, please refer to the “Warranty
and Service Manual” enclosed with your TV.
82
14
Specifications
23-inch LCD TV
LCD Panel Size
23-inch TFT
Aspect Ratio
15:9
Best Resolution
1280 (horizontal) x 768 (vertical)
TV System
PAL
Video System
AV1: Component Video (Audio in (R/L), YP BPR )
AV2: Composite Video (RCA jack; + S-Video)
AV3: Composite Video (RCA jack)
AV4: Composite Video (RCA jack; + S-Video)
AV5: Flash card reader (selected models only)
Audio System
AV1, AV2, AV3, AV4: L/R RCA jacks (audio input)
8 mm line in jack (audio input)
3.5 mm earphone and L/R line out RCA jacks (audio
output)
Built-in Stereo Speakers Amplifier
7.5W + 7.5W
Power Supply
220V, 50 Hz, 20V DC
Power Consumption
<150 W Maximum
Component Format
480i, 480p, 576i, 576p, 720p, 1080i
83
PIP Operation Mode
The following table shows which main sources are compatible with PIP and
POP sources.
Main Source
AV1
(YP BPR or YCB CR )
AV2 (S or CVBS)
AV3(CVBS)
AV4 (S or CVBS) “Front”
TV
PC
84
PIP Source
POP Source
AV2
—
AV3
—
AV4
—
TV2
—
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
AV2
AV2
AV3
AV3
AV4
AV4
TV2
TV2
15
Glossary
Aspect Ratio: The ratio of width to height of a film, image or display
screen.
BBE: A proprietary audio enhancement technology. BBE
compensates for distortion common to loudspeakers.
Color Temperature: Adjusting the color temperature enables you to
set the intensity of white light. Color temperature is measured in
Kelvin (K). Higher color temperatures result in a blue tint. Lower
temperatures result in a red tint.
EALA: 3D surround sound enhancement technology that provides a
more immersive and realistic soundscape.
Hue: Colors in a color system are measured by hue, saturation and
luminance. Hue indicates the predominant color.
LCD (Liquid Crystal Display): A display technology that uses
rod-shaped molecules (liquid crystals) that flow like liquid and bend
light.
OSD (On-Screen Display): A control panel on the television screen that
allows you to select viewing options.
Saturation: Chromatic purity indicating the amount of white contained
in a color. Fully saturated colors are pure colors; less saturated colors
appear as pastel shades.
Stereo: is the default audio signal belonging to a particular channel.
S-Video: Separate video, a video cabling standard used to transmit
video by keeping brightness (Y) and color information (C) on
separate channels. Most often used with camcorders.
TruSurround: 3D audio surround technology that delivers virtual
surround sound experience through any two speaker system,
including internal television speakers and headphones.
VCD: A compact disk format developed in 1993 by Sony and Philips
to capture full-motion video. A standard Video CD can hold 74
minutes of near VHS-quality video and CD-quality sound.
85
BBE, SRS, EALA Statement
•
•
•
•
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and
5736897.
BBE and BBE symbol are registered trademarks of BBE Sound,
Inc.
BBE High Definition Sound restores clarity and presence for
better speech intelligibility and musical realism.
is a trademark of SRS Labs, Inc. TruSurround
technology is incorporated under license from SRS
Labs, Inc.
EALA is a trademark of New Japan Radio Co., Ltd.
86
MEMO
MEMO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement