Harbor Freight Tools 94847 Pneumatic Planishing Hammer คู่มือการใช้งาน

Below you will find brief information for Pneumatic Planishing Hammer 94847. This pneumatic hammer is designed for planishing metal. It features adjustable anvil height and multiple anvil sizes for versatility. The unit includes a foot pedal for easy operation and requires an air compressor (not included). Safety precautions and maintenance instructions are provided.

PDF Download
Document
Harbor Freight Pneumatic Planishing Hammer 94847 Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Adjustable anvil height and multiple sizes
  • Foot pedal operation
  • Variable speed control
  • Durable C-frame construction
  • Safety features for user protection

Frequently asked questions

50 to 100 PSI (maximum)

3/8" to 1-1/4" opening; 1" Radius, 2" Radius and 3" Radius

Use the two-position anvil shaft mount with lock pin and the micro-adjustment block.

Check the air line and compressor for sufficient air pressure.

Wipe components clean after each use, lubricate the air line with pneumatic tool oil before each use, and drain water from the air compressor tank and lines.
Preparing document for printing…
0%