PT27F L0005

PT27F L0005
PT27F
L0005
High Quality automotive tweeter.
The diaphragm is formed from a pre coated fabric material. Careful matching of
fabric and coating results in a very smooth frequency response throughout the
audible frequency range.
A wide roll surround together with a double chamber magnet system results in a
low fundamental frequency.
Compact dual chamber neodymium magnet.
The voice coil is immersed in magnetic fluid, allowing high power handling
capacity and simplified crossover design.
100
50
95
90
40
85
80
30
SPL [dB]
70
20
65
60
10
Impedance [ohm]
75
55
50
100
1 000
10 000
0
Frequency [Hz]
The frequency responses above show measured free field sound pressure in 0, 30, and 60
degrees, mounted in a 0.6m by 0.8m baffle. Input 2.83 Vrms, microphone distance 0.5m,
normalized to SPL 1m. The impedance is measured without baffle using a 2V sine signal.
Nominal Impedance
6 Ohms
Voice Coil Resistance
4.9 Ohms
Recommended Frequency Range
2500 - 30000 Hz
Voice Coil Inductance
0.05 mH
Short Term Power Handling *
180 W
Force Factor
1.9 N/A
Long Term Power Handling *
80 W
Free Air Resonance
1000 Hz
Characteristic Sensitivity (2.83V, 1m)
89.5 dB
Moving Mass
0.23 g
Voice Coil Diameter
26 mm
Effective Piston Area
7.5 cm2
Voice Coil Height
1.5 mm
Magnetic Gap Flux Density
2.0 T
Air Gap Height
2 mm
Magnet Weight
0.01 kg
Linear Coil Travel (p-p)
0.5 mm
Total Weight
0.15 kg
Jul 2007-1
RoHS compliant product
*IEC 268-5, via High Pass Butterworth Filter 2500Hz 12 dB/oct.
SEAS reserves the right to change technical data
www.seas.no
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement