Hitachi AVC01U User's Manual

Hitachi AVC01U User's Manual
Audio Video Center
This Audio Video Center is intended to be use with Hitachi Ultra Thin monitors that
includes remote controls. This AVC01U does not include a remote control.
- Audio Video Center with ATSC/NTSC/QAM tuning.
- Selectable Upscaling to 1080i/1080p High Definition Output (HDMI).
- (2) Composite Video Inputs, (2) Component Video Inputs.
Operating Guide
Model Name
AVC01U
READ THE ENCLOSED INSTRUCTIONS CAREFULLY.
KEEP THIS OPERATING GUIDE FOR FUTURE REFERENCE.
Record the serial number of your A/V Center for future reference.
SERIAL NO.
This serial number is located on the bottom side of the unit
ANY QUESTION ABOUT THIS PRODUCT PLEASE CONTACT 800-HITACHI
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS............02
INTRODUCTION..............................................04
About This Manual..................................................... 04
Trademark Credits..................................................... 04
Software.................................................................... 04
Features.................................................................... 04
SAFETY PRECAUTIONS..................................05
Explanation of the Symbols....................................... 05
Cleaning and Maintenance........................................ 08
QUICK START GUIDE......................................09
1. Supplied Accessories ........................................... 09
2. Conect your A/V Center to the UT Monitor............ 09
3. Antenna Connection.............................................. 10
4. Power On............................................................... 10
COMPONENT NAMES......................................11
Main Unit................................................................... 11
Remote Control......................................................... 12
PREPARATION.................................................13
Remote Control Battery Installation........................... 13
Handling the Remote Control.................................... 13
Main Unit Installation................................................. 13
CONNECTION..................................................14
1. Connect your Equipment to the A/V Center........... 14
Connecting to Equipment Having
YPBPR Components Output Terminals............. 14
Connecting to Equipment Having
Video Output Terminals.................................... 14
Connecting to Equipment Having
an Audio Digital Input Terminal........................ 15
2. Connect your A/V Center to the UT Monitor.......... 15
BASIC OPERATION..........................................16
Power On/Off............................................................. 16
Volume Up/Down....................................................... 17
Mute........................................................................... 17
Channel Selector/Favorite Channel........................... 17
Input Switching.......................................................... 18
Input Signal Screen Display...................................... 18
SETUP OPERATION.........................................19
How to Use the Remote to Control your
External Devices........................................................ 19
Remote Control Codes.............................................. 23
How to Use the On-Screen Display (OSD) System... 25
Select Language........................................................ 25
ON-SCREEN DISPLAY......................................26
1
Main Menu List.......................................................... 26
Audio/Video............................................................ 27
Channel Manager................................................... 28
Locks...................................................................... 29
Timers.................................................................... 32
Setup...................................................................... 33
TROUBLESHOOTING.......................................35
About LCD Display Technology................................. 35
When the Following Messages Appear
on the Screen............................................................ 35
Symptom and Checklist............................................. 35
PRODUCT SPECIFICATIONS...........................37
Dimensions................................................................ 37
Recommended Signal List......................................... 37
SERVICE INFORMATION.................................38
LIMITED WARRANTY......................................39
END USER LICENSE AGREEMENT..................40
IMPORTANT SAFETY INSTRUCTIONS
Our reputation has been built on the quality, performance, and ease of service of Hitachi products.
Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this
section illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain
from it to the proper operation of your Hitachi Audio Video Center.
Please fill out your warranty card and mail it to Hitachi. This will enable Hitachi to notify you promptly in the improbable
event that a safety problem should be discovered in your product model. Model and serial numbers are indicated
underneath the product.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of a sufficient
magnitude to constitute a risk of electric shock to a person.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
READ BEFORE OPERATING EQUIPMENT
Follow all warnings and instructions marked on this Audio
Video Center.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The
wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use the attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Monitors, Televisions and Audio Video Centers are
designed to comply with the recommended safety
standards for tilt and stability. Do not apply excessive
pulling force to the front, or top, of the cabinet which
could cause the product to overturn resulting in product
damage and/or personal injury.
16. Follow instructions for wall, shelf or ceiling mounting
as recommended by the manufacturer.
17. An outdoor antenna should not be located in the vicinity
of overhead power lines or other electrical circuits.
18. If an outside antenna is connected to the A/V Center
and the monitor be sure the antenna system is
grounded so as to provide some protection against
voltage surges and built up static charges. Section
810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding for the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding connectors, location of antenna
discharge unit, connection to grounding electrodes
and requirements for the grounding electrode.
NOTE
To the CATV system installer: This reminder is provided to
call the CATV system installer’s attention to Article 820-44
of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as
close to the point of cable entry as practical.
2
ENGLISH
SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI AUDIO VIDEO CENTER
IMPORTANT SAFETY INSTRUCTIONS (continued)
Warning
•To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
•The A/V Center should not be exposed to dripping or splashing and objects filled with liquids, such as
vases, should not be placed on the A/V Center.
•The mains plug is used as the disconnect device and shall remain readily operable.
If problems occur during installation or operation of the product, before calling for technical support or service
technicians, please read “TROUBLESHOOTING” ( 35 ~ 36 ) to determine the symptoms.
If serious problems occur (such as smoke or an abnormal odor from the unit), turn off the main power, unplug the
power cord, and then, contact 800-HITACHI immediately.
Lead Notice
This product contains lead. Dispose of this product in accordance with applicable environmental laws. For
product recycling and disposal information, contact your local government agency or www.eRecycle.org (in
California), the Electronic Industries Alliance at www.eiae.org (in the US) or the Electronic Product Stewardship
Canada at www.epsc.ca (in Canada). FOR MORE INFORMATION, CALL 800-HITACHI.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
If the Audio Video Center is connected with a Monitor or TV Receiver, reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
This device complies with FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by Hitachi Home Electronics (America), Inc. may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain
compliance with FCC Rules and Regulations. Any cables that are supplied with the system must be replaced with
identical cables in order to assure compliance with FCC rules. Order Hitachi spares as replacement cables.
INDUSTRY CANADA AGENCY REGULATORY INFORMATION
Cable Compatible Television Apparatus- Tèlèvision câblocompatible, Canada.
Notes on Closed Captions
This A/V Center will display television closed captioning, (
15.122 of the FCC rules.
3
or
), in accordance with paragraph 15.119 and
Thank you for purchasing the Hitachi Audio Video Center. We hope that you will enjoy the outstanding performance
of this product.
This Audio Video Center has been designed to comply with international standards. However, it could cause
personal injury and property damage if improperly handled. In order to prevent potential danger and obtain
maximum benefit from your set, please read this operating guide carefully before operating this product and
observe the following instructions when installing, operating, and cleaning the product. To ensure proper operation,
please read and follow ALL the instructions, especially the "IMPORTANT SAFETY INSTRUCTIONS" and "SAFETY
PRECAUTIONS".
Keep this manual for future reference and record the serial number of your set in the space provided on the front
cover page of this manual.
About This Manual
The information in this manual is subject to change without notice.
This manual has been produced with the utmost care. If you have any comments or questions regarding this
manual, please contact your local dealer or our Customer Service Center.
Before operating the set, please fully understand the prerequisites such as specifications or constraints for the hardware
and software. Hitachi is not responsible and accept no liability for any loss, damage or injury as a result of misuse.
Reproduction, copying, utilization, modification and/or transmission in whole or in part of this manual are prohibited
except by prior written consent.
All other products and company names used in this manual are trademarks or registered trademarks of their
respective owners.
Trademark Credits
VESA is a registered trademark of the Video Electronics Standard Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
anufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
M
trademarks of Dolby Laboratories.
Even if no special note has been made of company or product trademarks, these trademarks have been fully
respected.
Software
It is illegal for you to alter, decompile, disassemble, decrypt, or otherwise reverse-engineer the software installed in
this product.
Features
Audio Video Center with ATSC/NTSC/8VSB/QAM Tuning
Upscaling to 1080i / 1080p High Definition Output
-Provides superior uncompressed digital video and audio quality in a simple, user-friendly HDMI connector.
Dolby Digital Optical utput
User-friendly on screen control
Terrestrial Cable, Analog and Digital Tuner
3-language On-Screen Display (English, French, and Spanish)
Parental Locks (Downloadable V-Chip)
Closed Caption Decoder
Memory by Input
Discrete IR Codes
Sleep Timer
4
ENGLISH
INTRODUCTION
SAFETY PRECAUTIONS
For your safety, please read the following precautions carefully before using this product. Improper use would cause
serious personal injury and/or damage to your property or the product.
Explanation of the Symbols
The following are the symbols used in this manual and affixed to the unit itself. Please fully understand the meanings
of the symbols before reading the instructions in this section.
WARNING
Never ignore the instruction. There are risks of serious or fatal injury to the user.
CAUTION
Do not ignore the instruction. There are risks of personal injury and/or property damage.
Other Symbols
The triangle with illustration is intended to alert the users that there are risks of fire, explosion, or high temperature if
the product is handled improperly.
Each illustration within the triangle specifies the contents in detail. (The figure on the left is an example.)
The circle with diagonal line and illustration indicates a prohibited action (the symbol to the left indicates that
dismantling is prohibited).
This symbol indicates a compulsory action.
The contents are clearly indicated in or adjacent to an illustration (the symbol to the left indicates that the power plug
should be disconnected from the power outlet).
WARNING
There is a risk of fire, electric shock, or serious injury.
■ If serious problems occur, unplug the power cord immediately.
Serious problems such as:
Smoke, abnormal odor or noise emitted from the product.
No picture, no sound or distorted picture on the display.
Foreign matter (such as water, metals etc.) entered the unit.
Do not continue using the product under these abnormal conditions.
Turn off the main power, unplug the power cord, and contact 800-HITACHI immediately.
For your safety, never try to repair the product yourself.
Disconnect the
plug from the
power outlet.
■ Do not allow liquids or any foreign matter (such as metals or flammable items) to enter the unit.
If this does occur, turn off the main power, unplug the power cord, and contact 800-HITACHI immediately.
Exercise special caution when young children are around the unit.
■ Do not remove covers, or modify the product.
High-voltage components are installed inside of the unit. Removing covers can expose you to high
-voltage electric shock, and other hazardous conditions.
Contact 800-HITACHI to perform servicing such as inspection, adjustment or repair work.
5
Do not
dismantle.
SAFETY PRECAUTIONS (continued)
ENGLISH
WARNING
There is a risk of fire, electric shock or serious injury.
■ Install the unit in a proper location where it does not expose anyone to danger.
If you bump against the edges of the unit, you could be injured.
■ Do not rest weight on top of the unit.
Objects such as
Liquid containers (vase, fish tank, flowerpot, cosmetics or liquid medicine).
If water or any liquid spills onto the unit, it may cause short-circuiting and result in fire or electric shock.
If this occurs, turn off the main power, unplug the power cord, and contact 800-HITACHI immediately.
Do not rest anything heavy on top of the unit.
Do not climb on or hang from the unit.
Do not allow your pets to get on top of the unit
■ Do not install the unit in an unsuitable location.
This could cause a malfunction or in extreme cases danger of electric shock. Locations where high
moisture is likely, such as bathrooms or shower rooms, close to windows, or outside where rain, snow
or other inclement conditions could occur, should be avoided. Please also avoid installing the unit in a
location where fumes from hot springs could come into contact with it.
■ Unplug the unit in the event of a lightning storm.
To reduce the risk of electric shock, do not touch the product when lightning occurs.
Disconnect the
plug from the
power outlet.
■ Do not do anything that may damage the power cord.
Do not damage, modify, twist, forcibly bend, heat, or pull excessively on the power cord.
Do not place heavy objects (including the unit itself) on top of the power cord.
If the power cord is damaged, contact 800-HITACHI for repairs or exchange.
■ Use only with designated power supply voltage.
To prevent the risk of fire and electric shock, operate the product only with the power supply voltage indicated on the
unit.
■ Be careful not to drop or allow any impact to affect the unit.
Take extra care while moving the unit.
In the event that you drop the unit or the cabinet is damaged, turn off the main power, unplug the power cord and
contact 800-HITACHI immediately.
Continuing use of the product under the above conditions may cause fire or electric shock.
■ Clean dust or metals from on or around the pins of the power plug regularly.
Continuing use of the product under the above conditions may cause fire or electric shock.
Always unplug the power cord first, then clean the pins using a dry cloth.
■ Do not place the unit on an unstable surface.
Unstable surfaces such as:
Tilted surface or shaky shelving, table, stand or trolley.
If the unit falls down, this could cause personal injury.
6
SAFETY PRECAUTIONS (continued)
CAUTION
■ Do not place or use the unit in a dusty location.
This could cause a malfunction.
■ Do not cover or block any ventilation holes on the product.
The unit would overheat and this could cause fire or damage to the product which may shorten its service lifetime.
Install the product in accordance with the instructions in this manual.
Do not place the unit with the ventilation side downward.
Do not install the unit on carpeting or bedding.
Do not cover the unit with table cloths etc.
■ Observe the anti-tumble measures described in this manual.
If the unit tumbles over, there is a risk of personal, possibly fatal injury. Also, this would damage the product seriously.
■ Do not install the unit near medical devices.
To prevent malfunction of medical devices, do not use the product and medical devices in the same room.
■ Disconnect all of the external connection cables and detach the anti-tumble measures before
moving the unit.
Otherwise fire, electric shock or personal injury may result.
■ Connect the power plug securely.
Improper connection will cause overheating and may result in fire.
Do not touch the pins of the plug while connecting it to the wall socket. This could cause electric shock.
If the plug is not suitable for the wall socket, contact your dealer for replacement.
■ Do not handle the power cord with wet hands.
This could result in electric shock.
■ Do not pull the cord when you unplug the power cord.
This may damage the cord and could result in fire or electric shock.
Grip the plug when disconnecting it.
■ Unplug the power cord when you do not intend to use the product for long periods of time.
■ Handle the batteries properly.
Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause fire, personal
injury or damage to property.
Use only the types of batteries which are indicated in this manual.
Do not replace batteries with used ones.
Install the batteries correctly by observing the polarity (+ and -) indications on the battery compartment.
Do not dispose of used batteries as domestic waste. Dispose of them in accordance with the local regulations.
7
SAFETY PRECAUTIONS (continued)
ENGLISH
CAUTION
■ Do not install the unit in locations where it will be subjected to high temperature.
This could damage the cabinet or components of the product.
Do not install near any heat sources such as radiators, heating grilles, stoves, or other apparatus that produce heat.
Keep the unit out of direct sunlight. Otherwise the resulting increase in temperature of the unit may cause a malfunction.
■ Viewing Advice(when using together with UT Monitors)
The lighting of the environment in which the product is used should be appropriate. Too bright/dark environments are not good for
your eyes.
Take time to relax your eyes occasionally.
When you use the product, view from a distance equal to 3 to 7 times the height of the screen. This is the best viewing distance in
order to protect your eyes against eyestrain. Example: (3X)= approx: 1.5m (4'), (7X)= approx: 3.5m (9').
Adjust the volume to an appropriate level, especially during night time.
■ Transporting the product
When the product needs to be transported due to moving or repair, use the carton box and buffer material that came with
the product.
■ Keep radios away from the unit while in use.
The unit is designed to meet the international EMI standards to prevent radio interference. However, the unit may generate
noise in the radio.
If noise is heard on the radio, please try the following actions.
Adjust the direction of the radio antenna in order not to receive interference from the unit.
Keep the radio away from the unit.
■ Infrared communication devices
Infrared communication devices such as cordless microphones or cordless headphones may not operate properly around the unit.
This is because of communication failure. Please note that this is not a malfunction.
■ When you dispose of the product at the end of its service lifetime, follow the regulations in your residential area.
For more information, contact the local authority or the dealer where you purchased the product.
Cleaning and Maintenance
Please make sure to unplug the power cord before cleaning the unit.
■ How to clean the cabinet of the unit.
The following may cause cracking, deformation and peeling of paint.
Do not wipe the cabinet with benzene, thinners and other chemical products.
Do not spray volatile solutions such as insecticide over the cabinet.
Do not leave the cabinet in prolonged contact with plastic or rubber materials.
Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, these may cause cracking and deformation.
Use a lint-free cloth (e.g. cloth for cleaning glasses) to clean the cabinet and control panel of the unit. In case of the excessive dirt,
wipe with a soft cloth moistened with a diluted neutral detergent solution and then wipe with a soft and dry cloth.
Never use the following detergents. They could cause cracking, discoloration and scratching.
Acidic/alkaline detergents, alcoholic detergents, abrasive cleaners, soap powder, OA cleaner, car wax, glass cleaner, etc.
8
QUICK START GUIDE
For more information on connecting and using your A/V Center, please be sure to read all instructions in this user manual.
1
Supplied Accessories
User Manual
2
Easy Graphic
Guide
Warranty
Cards
NOTE
The A/V Center is intended to be used with Hitachi
LCD UT Monitors that include remote controls.
The A/V Center does not include a remote
control.
Connect your Audio Video Center to the UT Monitor
The A/V Center HDMI output terminal (AV Out) is connected to the UT Monitor. Only one cable is used to
transmit all video/audio/control signals, thus facilitating an easy connection. Moreover, the digital signals can
produce high quality data without any degradation.
OUT
IN
Power Cord
HDMI Cable
NOTE
lease be sure to insert completely all HDMI cables when connecting to avoid abnormal picture.
P
Remember to attached the UT Monitor supplied cushion around the HDMI cable and secure with clamps to
avoid disconnection.
Please refer to the UT Monitor Operating Guide for more details.
Clamp
Cushion
(UT Monitor
supplied
accessory)
HDMI cable
Attach the cushion around
the HDMI cable so as not
to leave any clearance.
9
QUICK START GUIDE (continued)
ENGLISH
3 Antenna Connection
Unless your A/V Center is connected to a cable TV system or to a centralized antenna system, a good outdoor
color TV antenna is recommended for best performance. However, if you are located in an exceptionally good
signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient.
A/V Center Rear View
Antenna Terminal
a) VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system,
connect CATV coaxial cable to the AIR/CABLE
(75-Ohm) terminal. Or if you have an antenna,
connect the coaxial cable to the same AIR/CABLE
terminal.
To outdoor Antenna
or
Cable TV (CATV)
System
To Antenna
Terminal
c) When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV
antenna terminal, and connect the cables to the
antenna mixer. Consult your dealer or service store
for the antenna mixer
Air/Cable
To UHF antenna
b) VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor
antenna, connect the VHF or UHF antenna leads to
screws of the VHF or UHF adapter. Plug the adapter
into the antenna terminal on the A/V Center.
To outdoor VHF or
UHF Antenna
4
To outdoor antenna
or CATV system
Antenna Mixer
To Antenna
Terminal
Power On...
1) C
onnect the plug into the wall socket after all
other connections are completed.
CAUTION
Ensure that end of the power cord is easily accessible.
Do not use a power supply voltage other than that indicated
(AC120, 60Hz). It may cause fire or electric shock.
2) H
itachi A/V Center is provided with a Power Off/On button on
Front Panel and you can Turn it ON by pushing this button,
however Hitachi A/V Center is intended to be used with
Hitachi UT Monitors ;A/V Center and Monitor are connected
by a “HDMI CEC” connection and A/V Center will turn On/
Off following Monitor condition.
Power Switch
(on A/V Center Front)
10
COMPONENT NAMES
Main Unit
Front Panel
e
q
q Cabinet
w Indicating Lamp
e Power Off/On button
w
Rear Panel
e
q
w
e
t
r
q Antenna Input
To switch between Cable and Air input, go to the
Channel Manager option to change the signal source
CABLE or AIR.
w Audio/Video inputs 1 and 2 (Composite)
INPUT-1 and 2 provide composite Video jacks for
connecting equipment with this capability, such as a
DVD player, Game Console or Camcorders.
e Audio/Video inputs 3 and 4 (Y-PB PR Components)
INPUTS 3 and 4 provide Y-PBPR and Audio jacks for
connecting equipment with this capability, such as a
DVD player or Satellite Receiver.
NOTE
Your component outputs may be labeled Y, B-Y, and
y
t Optical Output
This jack provides Digital Audio Output for your audio
device that is Dolby® Digital and PCM compatible,
such as an audio amplifier.
NOTE
*Manufactured under license from Dolby Labora-
tories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
y HDMI Output(To UT Monitor)
The A/V Center HDMI output terminal (AV Out)
is connected to the UT Monitor. Only one cable is
used to transmit all video/audio/control signals, thus
facilitating an easy connection. Moreover, the digital
signals can produce high quality data without any
degradation.
R-Y. In this case, connect the components B-Y output to the PB input and the components R-Y output to
the PR input.
Your component outputs may be labeled Y-CBCR. In
this case, connect the component CB output to the PB
input and the component CR output to the PR input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs .
r USB Port(For S/W Upgrade only)
This slot is for future software upgrades. Hitachi will
notify you if a software upgrade is required for your
A/V Center. In order to receive written notification,
please complete and return your warranty card.
11
*Please refer to 14 ~ 15 for detailed information
regarding the connections.
COMPONENT NAMES (continued)
ENGLISH
Remote Control(Included with UT LCD Monitors)
In addition to controlling all of the functions on your Hitachi UT LCD Monitor and A/V Center, the new remote control is designed
to operate different types of devices, such as, DVD players, Cable Boxes, Set-Top-Boxes, Satellite Receivers, VCR's, PVR's and
AVR's. The remote control must be programmed to control the chosen device. Please refer to pages 19 ~ 22 for external device
programming setup.
Power On/Off
(Monitor, TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to switch the selected device
On or Off standby.
(-) Dash Button/Sleep
(TV, SAT,PVR,DVD)
Press this button when the remote is in SetTop-Box mode (SAT) or when the TV uses
a digital input. In TV mode press to set your
Sleep Timer from 30 min. to 3 hours.
Last Channel Button
(TV, SAT/CBL, PVR)
Press this button to switch between the
current and the last channel viewed.
Volume Buttons
(Monitor, TV, AVR)
Press up (+) to increase or down (-) to
decrease the audio level of your TV.
Menu Button
(Monitor, TV, DVD, PVR/VCR, SAT/CBL, AVR)
Accesses the OSD menu system.
Return Button
(Monitor, TV,DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to return to the previous menu.
Cursor PAD/OK Buttons
(Monitor, TV, DVD, PVR/VCR, SAT/CBL, AVR)
The Cursor PAD is used to navigate through
the OSD and INPUT menu system, The OK
button is used to Set/Activate highlighted
menu items.
Color Buttons
(SAT/CBL)
Use them for certain CBL/SAT device in OSD
navigation or features..
Input Select
(Monitor, TV, AVR)
Press this button to change input mode.
Device Buttons
(TV, DVD, PVR/VCR,
SAT/CBL, AVR)
Press these buttons to switch between your
devices.
Numeric Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press these buttons to manually enter
the channel and for numeric entry when
navigating through the OSD menu system.
Enter Button
(TV, DVD, VCR, SAT/CBL)
Press this button to use as a SELECT feature.
Channel Up/Down Buttons
(TV, PVR/VCR, SAT/CBL)
Changes up or down the channel.
Mute
(Monitor, TV, AVR)
Press this button once to turn off temporally
the audio level, press it again to restore audio
level.
Guide Button
(SAT/CBL, PVR,DVD)
Press this button to access the program guide
of TV and other devices.
Info Button
(Monitor, TV, DVD,SAT/CBL, PVR)
Shows the input signal status and other
information.
Picture Mode
(Monitor, TV)
Picture mode can be changed each time
pressed in the following sequence.
Dynamic
Natural
Cinema
Favorite Channel Button
(TV,SAT/CBL, PVR)
Press to enter/access Favorite Channel mode.
RGB Input Select
(Monitor)
Press this button to select RGB (/Composite)
input.
Aspect
(Monitor, TV)
Press this button to change picture size.
DVD/VCR CONTROL BUTTONS
(DVD, PVR/VCR, AVR)
Control the functions of your DVD and VCR.
HDMI Input Select
(Monitor)
Press this button to select HDMI input.
LEGENDS
TV - Television
DVD- Digital Video Disc Player
AVR - Audio/Video Receiver
VCR - Video Cassete Recorder
SAT - Satellite Receiver
PVR - Personal Video Recorder
CBL - Cable Box
NOTE
Pressing any button will illuminate the backlight for 4 seconds.
TV Mode is used for LCD Monitor when equipped with Hitachi A/V Center and Monitor is used as a TV.
For the Record button there is a feature for safety; so this key have to be press twice in order to start recording.
12
PREPARATION
Remote Control Battery Installation
Handling the Remote Control
Use the remote control within a distance of
about 5m (16’) from the front of the unit’s
remote control sensor and within an angle of
about 30 degrees on both sides.
The remote control operates on 2 “AAA” batteries.
1. Open the battery compartment cover
Push and pull open the battery compartment cover
on the backside in the direction of the arrow, and
remove the cover.
NOTE
Aim the Remote Control to the Monitor
IR sensor, Monitor will transmit the commands to
the A/V Center trough their HDMI connection.
2. Install the batteries
Install 2 “AAA” batteries (included)
making sure the polarities match the
indication inside the compartment.
3. C
lose the battery
compartment cover
Within 30
degrees
Within 30
degrees
Make sure the tabs rest in
the corresponding holes
and push down the
compartment cover until it
clicks shut.
About 3m (10’)
About 3m (10’)
About 5m (16’)
CAUTION
Risk of corrosion or battery leakage. Tampering with batteries may result in
physical injury and/or property damage including fire.
Never mix used and new batteries in the device.
Replace all the batteries in the device at the same time.
Remove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible malfunction, read the following instructions and handle
the remote control correctly.
Do not drop or allow impact to affect the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet surface.
Do not place the remote control under direct sunlight or near sources of excessive heat.
Main Unit Installation
10 cm.
Please leave adequate space around the unit in
order to avoid increasing the internal temperature.
Make sure not to block any ventilation holes.
Do not install the unit in a small space such as
inside a cabinet, closet or box without adequate
ventilation.
Leave at least 10cm (4") of clearance from each
side of the unit and from the top of the unit to
ceiling.
10 cm.
10 cm.
13
10 cm.
10 cm.
10 cm.
CONNECTION
ENGLISH
The unit is suitable for various kinds of connections. Make a connection in the following steps. Be sure to turn
off the main power first when connecting external equipment.
NOTE
Do not connect the power plug to the wall socket until all other connections are completed.
1. Connect your Equipment to the A/V Center
Connecting to Equipment Having a YPbPr Component Output Terminals
The A/V Center YPbPr Input 3 and 4 terminals can be connected to devices equipped with YPbPr or YCbCr
terminals output. Connect the Y, PB/CB, PR/CR from the Y, PB/CB, PR/CR OUT of the device to the INPUT 3 or 4
YPBPR jacks.Connect the AUDIO OUT signal to the Input 3 and 4 AUDIO IN terminals respectively.
Component
Video
IN
OUT
Green
Green
Blue
Blue
Red
Red
[Example]
DVD player
Satellite Receiver
Home video game system
(Audio)
White
White
Red
Red
Connecting to Equipment Having Video Output Terminals
The A/V Center Video Composite Input 1 and 2 terminals can be connected to devices equipped with standard
Video terminals output.
VCR
[Example]
Composite
Video
IN
OUT
Yellow
Yellow
White
White
Red
Red
DVD player
Satellite Receiver
Camcorder
* For Monoaural devices, please connect
Audio signal cable into L input jack .
Home video game system
NOTE
Please be sure to insert completely all cables when connecting to avoid abnormal picture and sound.
Make sure that the video and audio terminals are connected to the same external device.
Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to
white, etc.
For details of the output format of an external device, refer to "Recommended Signal List" on 37 .
14
CONNECTION (continued)
1. Connect your Equipment to the A/V Center (continued)
Connecting to Equipment Having a Audio Digital Input Terminal
The A/V Center “OPTICAL OUT” Audio terminal can be connected to devices equipped with Optical Input
capabilities such as Audio Amplifiers Systems. The “OPTICAL OUT” from the A/V Center Rear Panel is a fixed
output. The Volume of the amplifier is controlled by the amplifier, not by the A/V Center Unit. The OPTICAL
OUT terminal outputs all audio sources.
Optical
OUT
[Example]
IN
OUT
(Audio)
OPTICAL
IN
STEREO SYSTEM
AMPLIFIER
2. Connect your Audio Video Center to the UT Monitor
The A/V Center HDMI output terminal (AV Out) is connected to the UT Monitor. Only one cable is used to transmit
all video/audio/control signals, thus facilitating an easy connection. Moreover, the digital signals can produce high
quality data without any degradation.
OUT
IN
HDMI Cable
15
Power Cord
BASIC OPERATION
ENGLISH
Power On/Off
Indicating Lamp
Turn On the power of the unit.
To turn On the power to the unit:
1. Press the Power Switch on the A/V Center front or press
the Power (On/Off) button on the remote control.
The Indicating Lamp turns Blue.
The image will display on UT Monitor screen.
Power Switch
(on A/V Center Front)
To turn Off the power to the unit:
1. Press the Power (On/Off) button on the remote control.
The image disappears from the UT Monitor screen. The
Indicating Lamp turns Red (Standby mode).
Power On/Off button
2. Unplug the AC cord from the wall outlet to completely turn
Off the power to the unit. The Indicating Lamp turns off.
NOTE
Due HDMI-CEC function pressing the power on/off button on the
remote control will power down both the UT Monitor and the A/V
Center.
The Indicating Lamp Status
Indicating
Lamp
Power Status
Off
Off
Red
Standby mode
Blue
On
NOTE
If the image does not appear on the UT Monitor screen at all, or if there is any problem with it, see
“TROUBLESHOOTING” on 35 ~ 36 . This may help you to solve the problems.
After turning On, it takes about 6 seconds until the A/V Center starts up. Please note that buttons on the remote
control and the unit (such as the Power button) do not work during this period of time.
If power is interrupted during use of the unit, to avoid sudden surges of electricity when the power comes back on,
unplug AC cord before leaving home.
16
BASIC OPERATION (continued)
Volume Up/Down
1. To increase the sound volume, press the Volume Up button
on the remote control or control panel.
The Volume Indicator value on the screen will shift to the right.
Volume Up/Down
button
2. To decrease the sound volume, press the Volume Down button
on the remote control or control panel.
The Volume Indicator value on the screen will shift to the left.
Mute button
Mute
1. To mute sounds, press the
button on the remote control.
The sound of the unit is temporarily turned Off.
The color of the Volume Indicator will turn into grey
while muting the volume.
2. To turn the sound back on, press the
button again, or
press the Volume Up button on either the remote control or
control panel.
The color of the Volume Indicator will turn back to blue.
NOTE
You can decrease the volume by pressing the Volume Down
button while the sound is muted.
Channel Selector/Favorite Channel
The CHANNEL SELECTOR buttons are used to select channels, lock
access code, etc. Use the CHANNEL SELECTOR buttons to enter one,
two, or three numbers to select channels. Enter 0 first for channels
1 to 9, or simply press the single digit channel you wish to tune then
press the OK button for the TV to tune. Channel selection may also be
performed by CHANNEL (CH) UP ( ) or CHANNEL (CH) DOWN ( ).
Press the FAV CH button to switch to Favorite(FAV) channel mode. You
will know you are in Favorite Channel mode when (FAV) is displayed
and the displayed channel is GREEN. Press it again to return to your
regular tuned channels. You can add or delete any channel to your
Favorite channel list by pressing FAV CH button on A/V Center/Setup/
Channel List menu.
17
Volume Up/Down button On UT Monitor
20
BASIC OPERATION (continued)
Press the button
to access the INPUTS menu. Use the CURSOR
and OK buttons to scroll and select the inputs that are being used.
Pressing the INPUT button repeatedly will also cycle through the Inputs
menu items. Then press the
◄►
and
OK
buttons to select.
AIR/CABLE Select between Air or Cable signal.
INPUT 1
Select to choose Input 1.
INPUT 2
Select to choose Input 2.
INPUT 3
Select to choose Components Input 3.
INPUT 4
Select to choose Components Input 4.
Input 3
Input 4
Air/Cable
Input 1
Input 2
Move
OK
ENGLISH
Input Switching
Input Select
button
Select
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the
The display will go out in approximately 6 seconds.
YPbPr
Component
mode
YPbPr:3
480p
button on the remote control.
Input mode
Signal mode
INFO
button
Video
Composite
mode
Air/Cable
mode
Input:1
Program
Information
Digital Channel
Main Picture Source
& Channel Indication
D Air 15-1
Broadcast Channel
KPBS-HD
Indication
3:25 PM
Clock
DIGITAL CHANNELS
Alternate Rating
Show Name
3:00PM-3:30PM REGION 5
DTvCC TV-G
1080i
ST
Broadcast Picture
Audio Digital
Broadcast Captions Rating Format
Auto
Press the INFO button again to
return to normal viewing.
Closed Caption
Setting
ANALOG CHANNELS
Program
Information
Show Name
3:00PM-3:30PM
ST
TV-G
Audio
Broadcast
Broadcast
Rating
Auto
Closed Caption
Setting
NOTE
For Digital Channels press the
INFO button again for a more
detailed description of program.
A
480i
Analog Channel
Main Picture Source
& Channel Indication
Air 8
Broadcast Channel
KXYZ
Indication
3:17 PM
Clock
The Aspect setting will not be
shown if the channel is locked.
Picture Format
STEREO
Audio Source
Selection
18
SETUP OPERATION
How to Use the Remote to Control your External Devices
OPERATING THE PRECODED FUNCTIONS FOR YOUR EXTERNAL DEVICES.
The new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, satellite receivers,
DVD players, and other audio/video equipment. You must first program the remote to match the remote system of your
external equipment (refer to pages 23 ~ 24 for precodes).
EXTERNAL DEVICE CONTROL SETUP PROCEDURE
Power button
Device buttons
1. Turn on your external device.
2. Select the desired device mode DVD, PVR/VCR, SAT/CBL or
AVR by pressing the corresponding device button.
Numeric buttons
3. Hold down the device button (DVD, PVR/VCR, SAT/CBL or
AVR) on the remote and enter the four digit preset code that
matches your device as shown on pages 23 ~ 24 .
4. Release the device button.
5. If done correctly, the device LED indicator will blink 3 times to
confirm proper setup.
6. The remote will now control the desired device.
SETUP EXAMPLE (Hitachi Cable Box with precode
0003)
1. Turn ON your Cable box.
2. Select Cable mode by using your SAT/CBL button to position
the LED indicator on SAT/CBL.
3. Hold down the SAT/CBL button on the remote and press the
numbers 0, 0, 0 and 3.
4.
Release the SAT/CBL button.
5. The indicator light will flash 3 times if the code was accepted.
6. Aim the remote at the cable box and press the POWER button.
The remote will turn off your cable box when the correct four
digit preset code is entered. When this occurs, the remote
control is programmed for your cable box. If the cable box
does not turn off, try a different four digit preset code.
Remote Control Backlight Feature
7. The remote will now control your Cable box.
Disabling Remote Control Backlight Feature
1. Place the RC in TV mode.
2. Press and HOLD the TV mode key.
3. While holding the TV mode key enter ASPECT,
MUTE in sequence.
4. To re-enable the backlight feature do steps
1~3 again (these steps toggle the Backlight
Feature on and off, default is ON).
Repeat the same procedure for your set-top-box or satellite receiver
(select SAT/CBL), your DVD (select DVD), your VCR/PVR(select
VCR/PVR), or your AVR (select AVR).
NOTE
When you press any remote control button, the buttons
will light up. The illumination will light a few seconds
during this time. The buttons will appear to light if the
room is dark.
If your external device cannot be operated after performing the above procedures, your external device code has
not been precoded into the remote.
In the unlikely event that your external device cannot be operated after performing the above procedures, please
consult your external device operating guide.
The remote control will remember the codes you have programmed even after the batteries are removed from the
remote control. To reset all programmed codes to factory default place remote control in TV mode, then press and hold
TV mode key and enter “9”, “8”, “1” in sequence.
Depending of your UT Monitor model your remote control could have or not Backlight function.
19
SETUP OPERATION (continued)
Set-Top-Box/
Satellite Receiver
Device Button
Cable Device
Button
MY CABLE BOX CODE IS:____________________
NOTE
Refer to the operating guide of the Cable Box for
operation of the buttons exclusively for the Cable Box.
PRECODED CABLE BOX buttons
These buttons transmit the chosen precoded cable codes :
-Power
-Cursor & OK
-Number PAD
-Menu
-Info
-Enter
-Return
-Channel Up & Down -Fav CH
-Guide
-Dash(-)
-Color Buttons
-Last CH
EXCLUSIVE TV mode (Monitor) buttons
These buttons are for operating the TV :
-Input
-P. Mode
-HDMI
-Aspect
-Vol Up & Down
-RGB
-Mute
ENGLISH
How to Use the Remote to Control your External Devices
MY SET-TOP-BOX/SATELLITE RECEIVER
CODE IS:____________________
NOTE
Refer to the operating guide of the Set-Top-Box/Satellite
Receiver for operation of the buttons exclusively for the
Set-Top-Box/Satellite Receiver.
PRECODED SET-TOP-BOX/SATELLITE buttons
These buttons transmit the chosen precoded STB/Satellite
codes :
-Power
-Cursor & OK
-Number PAD
-Menu
-Info
-Enter
-Return
-Channel Up & Down -Fav CH
-Guide
-Dash(-)
-Color Buttons
-Last CH
EXCLUSIVE TV mode (Monitor) buttons
These buttons are for operating the TV :
-Input
-P. Mode
-HDMI
-Aspect
-Vol Up & Down
-RGB
-Mute
20
SETUP OPERATION (continued)
How to Use the Remote to Control your External Devices
DVD Device
Button
VCR/PVR
Device Button
MY DVD PLAYER CODE IS:___________________
NOTE
Refer to the operating guide of the DVD Player for
operation of the buttons exclusively for the DVD Player.
These buttons transmit the chosen precoded DVD codes :
-Play, Stop, Pause,
-Power
-Cursor & OK
RWD, FWD, Skip
-Menu
-Info
RWD, Skip FWD, Rec
-Return
-Number PAD
-Dash(-)
-Enter
EXCLUSIVE TV mode (Monitor) buttons
These buttons are for operating the TV :
-Input
-P. Mode
-HDMI
-Aspect
-Vol Up & Down
-RGB
-Mute
21
NOTE
Refer to the operating guide of the VCR/PVR for
operation of the buttons exclusively for the VCR/PVR.
PRECODED VCR/PVR buttons
PRECODED DVD buttons
-Guide
MY VCR/PVR CODE IS:____________________
These buttons transmit the chosen precoded VCR/PVR
codes :
-Power
-Cursor & OK
-Record
-Menu
-Channel Up & Down -Play, Stop,
Pause, RWD,
-Return
-Number PAD
FWD, Skip
-Info
-Last CH
(FWD,RWD)
-Guide
-FAV CH
EXCLUSIVE TV mode (Monitor) buttons
These buttons are for operating the TV :
-Input
-P. Mode
-HDMI
-Aspect
-Vol Up & Down
-RGB
-Mute
SETUP OPERATION (continued)
AVR Device
Button
ENGLISH
How to Use the Remote to Control your External Devices
MY AUDIO/VIDEO RECEIVER (AVR)
CODE IS:____________________
NOTE
Refer to the operating guide of the AVR for operation of
the buttons exclusively for the AVR.
PRECODED AVR buttons
These buttons transmit the chosen precoded cable codes :
-Power
-Channel Up & Down -Input
-Mute
-Number PAD -Vol Up & Down
-Return
-Cursor PAD
-Menu
EXCLUSIVE TV mode buttons
These buttons are for operating the TV :
-Info
-P. Mode
-HDMI
-Aspect
-RGB
22
SETUP OPERATION (continued)
Remote Control Codes
CABLE Brand
A-MARK
ABC
ACCUPHASE
ACORN
ACTION
CODES
0008,0144
0237,0003,0008
0003
0237
0237
ACTIVE
ADB
ARCHER
BCC
BRITISH
TELECOM
CENTURY
DIGEO
DIGI
DIRECTOR
DUMONT
FOSGATE
GE
GENERAL
INSTRUMENT
GIBRALTER
GOLDSTAR
HITACHI
INSIGHT
JERROLD
0237
2092,2586
0237
0276
0003
0008
1187,2187
0637
0476
0637
0276
0144
0476,0810,0276
0003
0003
0144
0003,0008
0476,0810
0476,0810,0276
0003
MEMOREX
0000
MITSUBISHI
0003
MOTOROLA
1376,0476,0810
0276,1187,1254
1106
NOVA VISION
0008
NOVAPLEX
0008
NSC
0637
PACE
1877,0877,0237
0008
PANASONIC
0000,0008,0144
PANTHER
0637
PARAGON
0000,0008,0525
PENNEY
0000,0637
PHILIPS
1305,0317
PIONEER
1877,0877,0144
0533
PULSAR
0000
QUASAR
0000
REGAL
0276
RUNCO
0000
SAMSUNG
0003,0144
SASKTEL
1737
SCIENTIFIC
1877,0877,0477
ATLANTA
0237,0003,0000
0008
SONY
1006
SPRUCER
0144
STARCOM
0003
STORM
0637
SUPERCABLE 0276
TORX
0003
TOSHIBA
0000
UNITED CABLE 0276,0003
US
0276,0003,0008
ELECTRONICS
VIDEOWAY
0000
ZENITH
0000,0525
CABLE/PVR
COMBO
DIGEO
GENERAL
INSTRUMENTS
JERROLD
MOTOROLA
PACE
PIONEER
SASKTEL
SCIENTIFIC
ATLANTA
SONY
SUPERCABLE
SATELLITE
BRAND
(Set Top Box)
BELL
EXPRESSVU
CHAPARRAL
COOLSAT
23
CODES
1187,2187
0810
0810
1376,0810,1187
1106
1877,0237
1877,0877
1737
1877,0877
1006
0276
CROSSDIGITAL 1109
DIRECTV
1377,0392,0566
0639,1639,1142
0247,0749,1749
0819,1856,1076
1108,0099,1109
1392,1414,1442
1443,1609,1640
DISH
1505,1005,0775
NETWORK
1170,1775
SYSTEM
DISHPRO
1505,1005,0775
1775
ECHOSTAR
1505,1005,0775
1170,1775
EXPRESSVU
0775,1775
FORTEC STAR 1821
FUNAI
1377
GE
0392,0566
GENERAL
0869
INSTRUMENTS
GOI
0775,1775
HITACHI
0749,0819,1250
HOUSTON
0775
HTS
0775,1775
HUGHES
1142,0749,1749
NETWORK
1442,1443
SYSTEMS
INNOVA
0099
JERROLD
0869
JVC
0775,1170,1775
LG
1414
MAGNAVOX
0722
MCINTOSH
0869
MITSUBISHI
0749
MOTOROLA
0869,0856
NETSAT
0099
NEXT LEVEL
0869
PANASONIC
PANSAT
PHILIPS
PIONEER
PRIMESTAR
PROSCAN
RADIOSHACK
RCA
SAMSUNG
SKY
SONY
STAR CHOICE
STAR TRAK
THOMSON
TIVO
TOSHIBA
ULTIMATE TV
ULTRASAT
UNIDEN
VOOM
ZENITH
SAT/PVR
COMBO
BELL
EXPRESSVU
DIRECT TV
DISH
NETWORK
SYSTEM
DISH PRO
ECHOSTAR
EXPRESSVU
HUGHES
NETWORK
SYSTEMS
JVC
MOTOROLA
PHILIPS
PROSCAN
RCA
SAMSUNG
SONY
STAR CHOICE
TIVO
ZENITH
CODES
VCR Brand
A-MARK
0775,1170
ABS
ACCURIAN
ADMIRAL
0216
1806,2147
0247,0701
1807
1142,0749,1749
0775,0819,1076
0722,0099,1442
1142,1442
0869
0392,0566
0566,0775,0869
0392,0566,1142
0775,0855,0143
1392,1442
1377,1142,1276
1108,1109,1442
1609
0856,0099
0639,1639,1640
0869
0869
0392,0566
1142,1442,1443
0749,1749,0790
1392,1640
1806
0722
0869
0856,1856,1810
CODES
0775,1170
1377,0392,0639
1142,1076,0099
1392,1442,1443
1640
1505,0775
1505,0775
1505,0775,1170
0775
1142,1442,1443
1170
0869
1142,1442
0392
1392
1442
0639,1640
0869
1142,1442,1443
1810
CODES
0037,0240,0000
0278,0046
1972
0000
0060,0048,0039
0047,0104,0209
0065,0479
ADVENTURA
ADYSON
AIKO
AIWA
AKAI
ALBA
ALIENWARE
ALLEGRO
AMERICA ACTION
AMERICAN HIGH
AMSTRAD
ASHA
ASTRA
AUDIOVOX
AVIS
BEAUMARK
BELL & HOWELL
0037,0240,0000
0072
0278
0037,0000,0124
0041,0175
0209,0072,0278
1972
0039
0278
0035,0081
0000
0240
0035,0081
0000
0000,0072
0240
0035,0048,0039
0000,0104,0046
0479
BROKSONIC
0184,0121,0209
0002,0479
CALIX
0037
CANDLE
0037,0038
CANON
0035
CAPEHART
0002
CARRERA
0240
CARVER
0035,0081
CCE
0072,0278
CINERAL
0278
CITIZEN
0035,0037,0240
0000,0209,0278
0479
CLASSIC
0037
COLORTYME
0060,0035,0045
0278
COLT
0000,0072
CRAIG
0037,0047,0240
0072
CRITERION
0000,0072
CROSLEY
0035,0081,0000
CROWN
0072,0278
CURTIS MATHES 0060,0035,0162
0240,0000,0041
0278,0432
CYBERNEX
0240
CYBERPOWER
1972
DAEWOO
0037,0045,0278
0046
DAYTRON
0037,0278
DELL
1972
DENON
0081,0042
DERWENT
0041
DIRECTV
0739
DUAL
0000
DURABRAND
0039,0038
DYNATECH
0240,0000
ELECTROHOME 0060,0037,0240
0000,0043,0209
ELECTROPHONIC 0037
EMERALD
0184,0121
EMEREX
0032
EMERSON
0037,0184,0240
0000,0121,0043
0209,0002,0278
0479,1593
FISHER
0039,0047,0000
0104,0046
FUJI
0035,0033
FUJITSU
0000
FUNAI
0037,0000,0072
0278,1593
GARRARD
0000
GATEWAY
1972
GE
0060,0035,0048
0240,0000,0065
GEMINI
0060
GENEXXA
0037,0000,0278
GO VIDEO
0240,0432,0526
0614
GOLDSTAR
0035,0037,0039
0000,0278,0038
GOODMANS
0037,0081,0000
0072,0278
GRADIENTE
0000
GRANADA
0081,0042
GRUNDIG
0081
HARLEY DAVISON 0000
HARMAN/
0081,0038
KARDON
HARVARD
0072
HARWOOD
0072
HEADQUARTER 0046
HEWLETT
1972
PACKARD
HI-Q
0035,0047,0000
HITACHI
0035,0037,0045
0000,0042,0041
0065,0105
HOWARD
1972
COMPUTERS
HP
1972
HUGHES
0042,0739
NETWORK
SYSTEMS
HUMAX
0739,1797,1988
HUSH
1972
HYTEK
0047,0000,0072
IBUYPOWER
1972
INSTANT
REPLAY
ITT NOKIA
JANEIL
JENSEN
JVC
KEC
KENWOOD
0035
0240,0041
0240
0067,0041
0067,0041,1162
0037,0278
0067,0041,0038
0046
KLH
0072
KODAK
0035,0037
KTV
0000
LG
0037,0240,0038
1037
LINKSYS
1972
LLOYD’S
0240,0000,0072
0038
LOEWE
0081
LOGIK
0240,0000,0072
LUMATRON
0278
LUXOR
0046
LXI
0037,0000,0042
0067
M ELECTRONIC 0240
MAGNASONIC 0037,0240,0000
0072,0278
MAGNAVOX
0035,0037,0048
0039,0081,0240
0000,0563,0618
1593
MAGNIN
0240
MARANTZ
0035,0081,0038
MARTA
0037
MATSUI
0037,0209
MATSUSHITA
0035,0162,0081
1162
MEDIA CENTER 1972
PC
MEI
0035
MEMOREX
0035,0162,0037
0048,0039,0047
0240,0000,0104
0209,0072,0278
0046,0479,1037
1162
METZ
0037
MGA
0060,0240,0043
MGN
0240
TECHNOLOGY
MICROSOFT
1972
MIDLAND
0240
MIND
1972
MINOLTA
0042,0105
MITSUBISHI
0060,0048,0047
0000,0042,0067
0043,0041
MOTOROLA
0035,0048
MOVIE WALKER 0072
MTC
0240,0000,0072
MTX
0000
MULTITECH
0039,0000,0072
NAD
0240,0104
NEC
0104,0067,0041
0038
NEW TECH
0072
NIKKO
0037,0278
NIKKODO
0037,0278
NISHI
0240
NIVEUS MEDIA 1972
NOBLEX
0240
NORTHGATE
1972
OLYMPUS
0035,0162,0104
ONKYO
0222
OPTIMUS
1062,0035,0162
0037,0048,0047
0240,0000,0104
0432,1048,1162
ORION
0184,0240,0000
0104,0121,0209
0002,0278,0479
PANAMA
0035
PANASONIC
1062,0035,0162
0000,0225,0614
0616,1162
PENNEY
0035,0162,0037
0047,0081,0240
0000,0042,0067
0038
PENTAX
0042,0065,0105
PHILCO
0035,0081,0000
0209,0479
PHILIPS
0035,0162,0048
0081,0045,0000
0209,0616,0618
0739,1081,1181
PILOT
0037
PIONEER
0162,0081,0042
0067,1337
POLK AUDIO
0081
PORTLAND
0278
PRESIDIAN
1593
PROFITRONIC 0240
PROSCAN
0060
PROTEC
0000,0072
PROTECH
0072
PULSAR
0039,0240,0278
PULSER
0240
QUARTER
0046
QUARTZ
QUASAR
0035,0047,0046
0035,0162,0002
1162
RADIOSHACK
0035,0162,0037
0048,0047,0240
0000,0104,0046
1037,1162
RADIX
0037
RANDEX
0037
RCA
0060,0035,0048
0240,0045,0000
0042,0065,0105
0880
REALISTIC
0035,0162,0037
0048,0047,0240
0000,0104,0121
0278,0046,0065
1162
REPLAY TV
0614,0616
RICAVISION
1972
RUNCO
0039
SAMSUNG
0060,0240,0045
0000,0038,0432
0739
SAMTRON
0240
SANKY
0048,0039
SANSUI
0240,0000,0067
0209,0041,0072
0002,0479
SANYO
0047,0240,0000
0104,0046,0159
0479
SCOTT
0184,0045,0121
0043
SEARS
0060,0035,0162
0037,0048,0039
0047,0033,0045
0000,0042,0104
0067,0043,0209
0041,0072,0046
0065,0105
SHARP
0048,0047,0032
0000,0065,0848
SHINTOM
0039,0240,0000
0072
SHOGUN
0240
SIEMENS
0037,0104
SIGNATURE
0060,0035,0037
0048,0000,0046
0065,0479
SINGER
0037,0240,0072
SONIC BLUE
0614,0616
SONOGRAPHE 0046
SONY
0035,0047,0032
0033,0000,0067
0046,0636,1032
1972
SOUNDMASTER 0000
STACK 9
1972
STS
0042,0105
SV2000
0000,0072
SVA
0000
SYLVANIA
0035,0081,0000
0043,1593
SYMPHONIC
0240,0000,0002
1593
SYSTEMAX
1972
TAGAR SYSTEMS 1972
TANDY
0000,0104
TASHIKO
0037
TATUNG
0048,0081,0000
0067,0041
TEAC
0000,0067,0041
TECHNICS
0035,0162,0037
0000
TEKNIKA
0035,0037,0000
TELECORDER
0240
TELEFUNKEN
0041
TEVION
0479
THOMAS
0000,0002
THOMSON
0060,0041
TISONIC
0278
TIVO
0618,0636,0739
1337
TMK
0240,0000
TNIX
0037
TOCOM
0240
TOSHIBA
0240,0045,0000
0043,0209,0041
1008,1972,1988
TOSONIC
0278
TOTEVISION
0037,0240
TOUCH
1972
TRIX
0037
ULTRA
0045,0278
UNITECH
0240
VECTOR
0045
VECTOR
0184,0038
RESEARCH
VEXTRA
0072
VICTOR
0067,0041
VIDEO
0045
CONCEPTS
VIDEOMAGIC
0037
VIDEOSONIC
0240,0000,0072
VIEWSONIC
1972
VILLAIN
0000
VOODOO
1972
SETUP OPERATION (continued)
WARDS
0060,0035,0037
0048,0047,0081
0033,0240,0045
0000,0042,0043
0041,0072,0038
0479,0065,0046
WHITE
0000,0209,0072
WESTINGHOUSE 0278,0479
WORLD
0209,0002,0479
XR-100
0035,0240,0000
0072
YAMAHA
0041,0038
ZENITH
0037,0039,0033
0000,0209,0041
0278,0479,1139
ZT GROUP
1972
PVR Brand
ABS
ALIENWARE
CYBERPOWER
DELL
DIRECTV
GATEWAY
GO VIDEO
HEWLETT
PACKARD
HOWARD
COMPUTERS
HP
HUGHES
NETWORK
SYSTEMS
HUMAX
HUSH
IBUYPOWER
LINKSYS
MEDIA CENTER
PC
MICROSOFT
MIND
NIVEUS MEDIA
NORTHGATE
PANASONIC
PHILIPS
PIONEER
RCA
CODES
1972
1972
1972
1972
0739
1972
0614
1972
REPLAY TV
SAMSUNG
SONIC BLUE
SONY
STACK 9
SYSTEMAX
TAGAR
SYSTEMS
TIVO
0614,0616
0739
0614,0616
0636,1972
1972
1972
1972
TOSHIBA
TOUCH
VIEWSONIC
VOODOO
ZT GROUP
1972
1972
0739
0739,1797,1988
1972
192
1972
1972
1972
1972
1972
1972
0614,0616
0618,0739
1337
0880
0618,0636,0739
1337
1008,1972,1988
1972
1972
1972
1972
DBS/PVR
COMBO
DIRECTV
HUGHES
NETWORK
SYSTEMS
PHILIPS
SAMSUNG
TIVO
CODES
DVD/PVR
COMBO
HUMAX
PIONEER
RCA
SYLVANIA
TIVO
TOSHIBA
CODES
DVD Brand
3D LAB
ACCURIAN
ACOUSTIC
SOLUTIONS
ADCOM
AFREEY
AIWA
AKAI
CODES
0503,0539
0675,1416
0730
ALBA
ALCO
ALLEGRO
0739
0739
0739
0739
0739
1797,1988
1337
0880
0000
1337
1008,1988
1094
0698
0641
0695,0705,0770
1089
0672
0790
0869
AMPHION
0872
MEDIA WORKS
AMW
0872
APEX DIGITAL 0533,0672,1020
1056,1061
ARRGO
1023
ASPIRE
1168
DIGITAL
AUDIOVOX
0790
AWA
0730
B&K
0655,0662
BBK
1224
BEL CANTO
1571
DESIGN
BLUE PARADE 0571
BLUE SKY
0695
BROKSONIC
0695
CALIFORNIA
0490
AUDIO LABS
CELESTIAL
1020
CENTREX
0672
CINEA
0831
CINEVISION
0876,0833,0869
CITIZEN
1003,0695,1277
1587,2116
CLAIRTONE
0571
COBY
0778,0852,1077
1086,1107,1165
1177,1351
CRAIG
0831
CREATIVE
0503,0539
CURTIS
1087
MATHES
CYBERHOME 0816,0874,1023
1024,1129,1502
1537
CYTRON
0705
DAEWOO
0784,0705,0770
0833,0869,1169
1172,1234,1242
DANSAI
0770
DAYTEK
0872
DECCA
0770
DENON
0490,0634
DENVER
0778
DIGITREX
0672
DISNEY
0675,1270
DI VIDO
0705
DUAL
0675
DURABRAND 1127
DVD2000
0521
EMERSON
1003,2116
ENTERPRISE 0591,0675
ENTIVO
0503,0539
ENZER
0770
FISHER
1919
FUNAI
0675
GATEWAY
1073,1077,1158
GE
0522,0815
GO VIDEO
0573,0744,0715
0741,0783,0833
0869,1044,1075
1099,1144,1158
1304,1730
GOLDSTAR
0741,0869
GOODMANS
0790
GPX
0769
GRADIENTE
0490
GRUNDIG
0539,0705
HARMAN/
0582,0702
KARDON
HELLO KITTY 0831
HITACHI
0573,0664,1919
HITEKER
0672
INSIGNIA
2095
INTEGRA
0571,0627
IRT
0783
JBL
0702
JMB
0695
JSI
1423
JVC
0558,0623,0867
1164
JWIN
1049,1051
KAWASAKI
0790
KENWOOD
0490,0534
KLH
0790,1020,1149
KLOSS
0533
KONKA
0711,0721
KOSS
0769,1061,1423
LASONIC
0627
LECSON
1533
LENOXX
1127
LG
0591,0741,0869
LITEON
1058,1158,1416
1440
0741
0783
0675
0503,0539,0646
0675,1354,1506
MALATA
1159
MARANTZ
0503,0539,0646
0675,1354,1506
MCINTOSH
1533,1273
MEMOREX
0695,0831,1270
2213
MICROSOFT
0522,2083
MINATO
0752
MITSUBISHI
1521,0521
MUSTEK
0730
MYRAD
0894
NAD
0741
NAIKO
0770
NEC
0785,0869
NEXXTECH
1402
NINTAUS
1051
NORCENT
1003,0872,1107
1265
ONKYO
0503,0627,1769
OPPO
0575,1224,1525
2185
OPTIMUS
0571
PALSONIC
0672,0852
PANASONIC
0503,0490,0571
0703,1641,1762
PHILCO
0675
PHILIPS
0503,0539,0646
0675,1267,1340
1354,2056,2084
PIANODISC
1024
PIONEER
0525,0571,0142
0631,1571
POLAROID
1020,1061,1086
POLK AUDIO
0539
PORTLAND
0770
PRESIDIAN
0675
PRIMA
2126,2127
PROCEED
0672
PROSCAN
0522
PROVISION
0778
RADIONETTE
0741
RADIOSHACK
0571
RCA
0522,0571,0790
0822,1769
REALISTIC
0571
REOC
0752
RIO
0869
RJTECH
1360
ROTEL
0623,1178
SAMPO
0698,0752
SAMSUNG
0490,0573,0744
0199,0820,1044
1075,2069
SANSUI
0695
SANYO
0675,0695,0873
1919
SCHNEIDER
0783
SCHWAIGER
0752
SENSORY SCIENCE 1158
SHARP
0630,0675,0752
1256
SHERWOOD
0633,0770,1043
1077
SHINSONIC
0533
SLIM ART
0784
SM ELECTRONIC
0730
SONIC BLUE
0573,0715,0783
0869,1099
SONY
0533,1533,0864
1033,1070,1431
1516,1536
SYLVANIA
0675
SYMPHONIC
0675
TAG MCLAREN
0894
TATUNG
0770
TEAC
0571,0790
0490,0703
TECHNICS
0770
TECHNIKA
0730
TECHSONIC
0571
THETA DIGITAL
0522
THOMSON
1503
TIVO
0503,0573,0539
TOSHIBA
0695,1154,1503
1608,1769
0800,0803
TREDEX
0770
UNIMAX
0730
UNITED
0591
UNIVERSUM
URBAN CONCEPTS 0503,0539
1064,1226
V
0790
VENTURER
1064,1226
VIZIO
LOEWE
LOGIX
MAGNASONIC
MAGNAVOX
ZEUS
ZOECE
1360
0522,2083
0490,0539,0545
0497
0872
0503,0591,0741
0869
0784
1265
BLU-RAY DISC
LG
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SONY
CODES
0741
1641
2084
0142
0199
1516
DVD/PVR
COMBO
GO VIDEO
PANASONIC
PHILIPS
PIONEER
RCA
SHARP
SONY
SYLVANIA
TOSHIBA
CODES
HD-DVD
LG
MICROSOFT
ONKYO
RCA
TOSHIBA
XBOX
CODES
0741
2083
1769
1769
1769
2083
VOCOPRO
XBOX
YAMAHA
YAMAKAWA
ZENITH
1730
0490
1340
0631
0522
1256
1033,1070,1536
0675
1503
AUDIO
CODES
RECEIVER Brand
AIWA
1405,0189,0121
1243,1388,1641
ALCO
1390
ANAM
1609
APEX DIGITAL
1774
ARCAM
1189
AUDIOTRONIC
1189
AUDIOVOX
1390
B&K
0820,0840
BOSE
0639,1253,1933
BRIX
1602
CAIRN
0189
CARVER
1189,0189,0121
CURTIS MATHES 0014
DELPHI
1414
DENON
1360,0121,1142
1306
ELECTROHOME 2026
GRUNDIG
0189
HARMAN/
0189,0891,1304
KARDON
1306
HITACHI
0228
INSIGNIA
1030,2169
INTEGRA
0842,1298,1320
1805
JBL
1306
JVC
1058,1374,1495
1811
KAWASAKI
1390
KENWOOD
1570,1569
KLH
1390,1428
KOSS
1497
LG
2197
LINN
0189
LIQUID VIDEO
1497
MAGNAVOX
1189,1269,0189
1266,1514
MARANTZ
1189,1269,0189
0891
MICROMEGA
1189,0189
MITSUBISHI
1393
MYRAD
1189
NAKAMICHI
0097,1555
ONKYO
0842,1298,1320
1805
OPTIMUS
1023,0014,0121
0670
ORITRON
1497
PANASONIC
1308,1518,1288
1316,1548,1633
1763,1764,2967
PHILIPS
1189,1269,0189
0891,1266
PIONEER
1023,0014,0630
1384,1935
POLK AUDIO
0189,1414
RADIO SHACK
1609
ENGLISH
Remote Control Codes
RCA
REALISTIC
REVOX
SAMSUNG
SANGEAN
SANSUI
SHERWOOD
SIRIUS
SONY
1023,1609,1390
1609,0121
0189
1304,1500,1868
2165
1189,0189
1913
1602,1811
1058,1441,1258
1759,1622,1406
1558,1658,1758
1858
SOUNDESIGN
0670
STEREOPHONICS 1023
TEAC
1390
TECHNICS
1308,1518,1633
THORENS
1189
TOSHIBA
0842,1788
VENTURER
1390
WARDS
0189,0014
XM
1406,1414
YAMAHA
1023,0176,1176
1276,1331,1815
2061
AUDIO
AMPLIFIER Brand
ADCOM
BOSE
CARVER
CARY AUDIO
DESIGN
CLASSE
FLEXTRONICS
HALCRO
HARMAN/
KARDON
KRELL
LEFT COAST
LEXICON
MARANTZ
MARK LEVINSON
PARASOUND
PHILIPS
POLK AUDIO
PRIMARE
YAMAHA
TELEVISION
HITACHI
CODES
0577,1100
0674
0892
1879
1461
1879
1934
0892
1837
0892
1145,1802
0892
1483
1934
0892
0892
1395
0354
CODES
1445,1643,2143
2243
24
SETUP OPERATION
How to Use the On-Screen Display (OSD) System
You can use the On-Screen Display system to access the various kinds of the features and functions of your A/V
Center.
Menu button
Basic Operation
◄►
1. Press the
button on the remote control or the Menu button on the
control panel underneath the UT monitor. The Main Menu is displayed on the
screen as shown on the right.
2. To select the A/V Center menu, press the
button.
The A/V Center item will be highlighted in Yellow.
4. Use the
◄►
3. Press the OK button to set your selection.
The A/V Center unit menu page will be displayed on the screen.
Press the
5. Use the
Press the
button to choose the item on the menu page.
OK
◄►
Picture
Audio
Function
Setup
Language
AV Center
Select OK Set
button to set your selection.
<Main Menu>
button to adjust the item values or choose options.
OK
button to set your selection.
6. To exit from the menu, press the
or the
Audio/Video
Channel Manager
Locks
Timers
button.
Setup
Move
OK
Select
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
If the item on the menu is shown in gray, it means that it cannot be selected
<A/V Center Menu>
or adjusted.
In order to appear A/V Center menu on Main Menu, A/V Center Control need
to be activated on Funcion/HDMI Control menu.
UT Monitor
Control panel
Menu button
Select Language
Select the language from the list so that the OSD menu can be displayed in the selected language.
The default setting is English (US).
How to set Language
2. Select your preferred language from the list using the
The selected item will be highlighted in Yellow.
◄►
1. Enter the “Language” menu from the Main Menu.
button.
3. Press the OK button to set your selection.
The mark on the left turns into a double circle when the selection is fixed.
4. Press the
NOTE
Language
‫ޓޓޓޓޓ‬English
‫ޓޓޓޓޓ‬English (US)
‫ޓޓޓޓޓ‬Français
‫ޓޓޓޓޓ‬Español
‫ޓޓޓޓޓ‬Deutsch
‫ޓޓޓޓޓ‬ᣣᧄ⺆
‫ޓޓޓޓޓޓ‬૕ਛᢥ
‫❥ޓޓޓޓޓ‬㜚ਛᢥ ‫ޓޓޓޓޓ‬
Select
OK Set
Return
button to exit from the entire OSD menu.
When the Language is set on Main Menu the A/V Center menu automatically set to that language, please note
that English, Spanish and French are supported by A/V Center.
25
On-Screen Display
ENGLISH
This part of the screen shows which
selections are available.
Audio/Video
Channel Manager
Locks
Timers
Setup
Move
SEL
This part of the screen shows
which Remote Control buttons
to use.
Select
Main Menu List
Menu
Audio/Video
Page
Video Resolution
Select between 2 resolution modes.
27
Auto Movie Mode
Adjust to make the moving image smooth.
27
3D Comb Filter
Reduce the color blurring to reproduce purer color.
27
Audio Source
Select between 3 Audio Sources.
27
Audio Language
Select Language options if available.
27
Digital Output
Select Optical Output options.
27
DRC
Select Dynamic Range Compression to ON or OFF.
27
Lyp Sync
Synchronizes audio with video signal on digital and analog sources.
27
NOTE
“3D Comb Filter” is only available to Composite Inputs and Analog Channels.
“Audio Language”, “Digital Output” and the “DRC” are only available for Digital Channels.
“Auto Movie Mode” and “Lyp Sync” can be stored for each of inputs.
Menu
Channel Manager
Page
Signal Meter
Access Signal Meter.
28
Auto Channel Scan
Set Auto Channel Scan.
28
Channel List
Set Channel List.
28
NOTE
“Signal Meter” is only available for Digital Channels..
Menu
Locks
Page
Change Access Code
Change Lock access code.
29
Movie Ratings
Block various types of movies and video types based on motion picture ratings.
29
TV Ratings
Block various types of movies and television programming based on a parental guide ratings.
29
Canadian Ratings (ENG)
Block various types of movies and television programming based on the Canadian ratings system.
29
Canadian Ratings(FRN)
Block various types of movies and television programming based on the Canadian French ratings system.
29
Region 5
Ratings system for DTV Signal to block various types of programs.
29
NOTE
“Region 5” is only available for Digital Channels..
Menu
Timers
Setup
Page
Set The Clock
Set Clock Settings.
32
Set Sleep Timer
Set Sleep Timer intervals (30 min. intervals, 00:30-3:00).
32
Menu
Page
Set The OSD & Panel Options
Choose OSD Contrast. and Side Panel Color.
33
Set The Inputs
Label Video Inputs, VCR, DVD, etc
33
Set The Closed Captions
Feature to display dialogue/text and change its appearance.
33
Reset The Software
Select to upgrade A/V Center software
34
26
On-Screen Display (continued)
Audio/Video
You can adjust some settings of the display and audio condition.
Select "Audio/Video" from Menu list.
Audio/Video
1080p
Audio/Video
Auto Movie Mode
On
Channel Manager
Locks
3D Comb Filter
Off
Audio Source
Stereo
Audio Language
1[Unknown]
Digital Output
Dolby Digital
DRC
On
OR
Timers
Setup
Move
SEL
Lyp Sync[Analog]
Select
Move
Selected Items
Video Resolution
Auto Movie Mode
3D Comb Filter
Audio Source
1080p
1080i
On
Off
On
Off
Mono
SAP
Audio Language
SEL
0
Select
Setup hint
Stereo
1[English]
2~4[Others]
*Dolby®Digital
Digital Output
PCM
On
DRC
Off
Lyp Sync
Air/Cable
Video Resolution
-2~+5
You can make the selection for A/V Center output resolution,
depending of your preference.
On: Automatically identifies if it is a movie and faithfully reproduces
the original film images.
Off: Set to Off if the image does not look natural.
This reduces the dot and color blurring in minute scales so that it can
reproduce purer color.
Multi-Channel Television Sound will allow you to select STEREO (a
stereo broadcast), MONO (monaural sound) used when receiving a
weak stereo broadcast or SECOND AUDIO PROG (SAP) which may
be a secondary language, weather report, etc.
Some programs transmit more than one DTV language option. Most will
have English as a default language. The language function will allow
you to select up to 4 language options (if available).
This function allows you to select between Dolby®Digital and PCM.
This setting is fed into Optical Output.
Dolby®Digital Select this feature if the TV is connected to an amplifier/
receiver with a Dolby®Digital only decoder; it will
provide six independent soundtrack channels through
the optical output jack (Digital Audio).
PCM
S
elect this feature if the TV is connected to an amplifier/
receiver with a PCM only decoder; it will provide two
independent soundtrack channels through the optical
output jack (Digital Audio).
Dynamic Range Compression.- Use this function to compress the
range of sound volume. By compressing the range of sound volume,
it is possible not only to suppress the output of loud sound at night but
also to raise the volume of low sound. The default setting is ON.
Selecting this feature will allow you to synchronize the audio with
the picture signal. AUTO option automatically synchronize the audio
and picture, if result is not satisfactory, please use the ◄► button to
synchronize the picture and the audio signal manually. The default
value is set to 0.
NOTE
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
27
On-Screen Display (continued)
ENGLISH
Channel Manager
Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List.
Select "Channel Manager" from Menu list.
Audio/Video
Channel Manager
Channel Manager
+
Signal Meter
Locks
Auto Channel Scan
OR
Timers
Channel List
Setup
Move
SEL
Move
Select
Selected Items
Signal Meter*
SEL
Select
Setup hint
Select SIGNAL METER when using an indoor or outdoor antenna. This feature will
show the signal strength and peak values of the Antenna signal to help you adjust
your antenna to optimize signal reception.
This feature will automatically store active Analog and Digital channels in Auto
Channel Scan memory.
Auto Channel Scan
1.-Use the
◄►
button to highlight AIR or CABLE source.
2.-Then use the
◄►
and
OK
buttons to highlight and select the START or RESET
option.
This function allows you to review which channels are labeled (ID), which have been
added to CHANNEL MEMORY (SKIP), which are protected by LOCK and which are
your FAVORITE (FAV) CHANNELS.
Channel List**
1.-Use the
◄►
2.-Use the
OK
button to navigate the Channel List.
button to select ON or OFF on the SCAN and LOCK columns.
3.-To select LOCK column, input the access code.(Default access code: 0000).
4.-Press the FAV CH button to set or remove the FAVORITE settings.
NOTE
*The Signal Meter will not be available (grayed out) when watching analog channels.
**The Channel List cannot be updated by only changing the cable source. Auto Channel Scan must be performed
for the Channel List to be updated.
IMPORTANT NOTICE
United States federal law requires broadcasters to stop transmitting analog (non-digital) television signals after February 17, 2009.
Accordingly, this TV’s analog tuner will not be capable of receiving over-the-air analog television broadcasts after such analog
broadcasts are no longer available.
After February 17, 2009, this TV’s analog tuner will continue to work with compatible cable and satellite TV systems, gaming
consoles, VCRs, DVD players and other similar products.
Both before and after February 17, 2009, this TV’s digital tuner will receive available over-the-air digital television broadcasts using
an antenna and other digital television broadcasts using compatible cable, satellite or other digital television system connections.
Please review this Operating Guide for further information regarding such connections.
Hitachi supports the DTV transition and as a member of the DTV Transition Coalition urges consumers to visit these web sites for
interactive guides and further detailed information:
• www.dtvtransition.org
• www.myceknowhow.com
• www.dtv2009.gov
• www.youtube.com
28
On-Screen Display (continued)
Locks
This function will block out the picture and sound of the selected channel
Select "Locks" from the Menu list.
Locks
Audio/Video
Change Access Code
Channel Manager
+
Locks
Please Enter Access Code
OR
Timers
TV Ratings
Access Code _ _ _ _
Canadian Ratings (Eng)
[# Keys] Enter Code
Canadian Ratings (Frn)
Setup
Move
1. Use the
◄►
2. Use the
OK
SEL
Movie Ratings
Region 5
Select
Move
SEL
Select
button to select the RATING CATEGORY (MOVIE, TV, etc.) that you want to block.
button to block the RATING that you have selected.
Selected Items
Setup hint
Select CHANGE ACCESS CODE to change the factory preset code (0000)
to your preference.
Change Access Code
If you forget your ACCESS CODE NUMBER, use the factory code 7777 to
erase your key number. This will reset the access code number back to the
factory preset (0000).
Movie Ratings
Use Movie Ratings to prevent viewing of any movie that you feel may be
inappropriate due to its content (see page 30).
TV Ratings
Use TV Ratings to prevent viewing of any TV program that you feel may be
inappropriate due to its content(see page 30).
Canadian Ratings(Eng)
Use CANADIAN RATINGS (ENG) to block any type of movie and television
program in Canada that you feel might be inappropriate in its content (see
page 30).
Canadian Ratings(Frn)
Use CANADIAN RATINGS (FRN) to block Canadian French programs
according to various program ratings that you feel might be inappropriate
in its content (see page 31).
Region 5*
Use REGION 5 to block various types of movies and television pograms
based on ratings systems used in U.S. that you feel may be inappropriate
due to its content (see page 31).
Due Region 5 ratings are downloaded from broadcaster signal, they are
not fixed, UPDATE function will let you receive latest rating data.
NOTE
*The REGION 5 option will operate for Digital Channels(ATSC) only.
29
On-Screen Display (continued)
ENGLISH
Locks(continued)
Motion Picture Ratings Table
NOT RATED Contains no rating. Not Rated (NR) and Not Applicable (NA) programs. Movie has not been rated or ratings do not
apply.
G
General audiences. All ages admitted.
PG
Parental guidance suggested. Some material may not be suitable for children.
PG-13
Parents strongly cautioned. Some material may be inappropriate for children under 13.
R
Restricted. Under 17 requires accompanying parent or adult guardian.
NC-17
No one 17 and under admitted.
X
Adults only
NOTE
A movie rating is dependent upon the movie that is viewed. If the movie does not carry a rating, the TV will not block it.
B
locking NOT RATED programs may block emergency programming, sports, news, public service announcements, religious
programs and weather.
TV Parental Guide Ratings Table
TV-Y
All children. The themes and elements in this program are specifically designed for a very young audience, including
children from ages 2-6.
TV-Y7
Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or
may frighten children under the age of 7.
TV-G
General audience. It contains little or no violence, no strong language, and little or no sexual dialogue or situations.
TV-PG
Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some
suggestive sexual dialogue and situations.
TV-14
Parents strongly cautioned. This program may contain sophisticated themes, intense sexual situation, more intense
violence and intensely suggestive dialogue.
TV-MA
Mature audiences only. This program may contain mature themes, indecent language, graphic violence, and explicit
sexual content.
FV: Fantasy/Cartoon Violence V: Violence S: Sexual Situation
L: Adult Language
D: Sexually Suggestive Dialogue
NOTE
If you Block TV-14D, you will still permit TV-MA programs; If you block TV-14V, you will automatically block TV-MAV programs,
but you will still permit TV-MALS programs. This means that the TV will block violence in TV-14 and higher (TV-MA), but not
language and sex.
T
V program ratings are dependent on the broadcaster. If the program is not rated, the TV will not block it.
Canadian Ratings English Table
C
Programming intended for children under age 8 - Violence Guidelines; Careful attention is paid to themes, which
could threaten children’s sense of security and well-being. There will be no realistic scenes of violence. Depictions of
aggressive behaviour will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in
nature. Other Content Guidelines: There will be no offensive language, nudity or sexual content.
C8+
Programming generally considered acceptable for children 8 years and over to watch on their own - Violence
Guidelines: Violence will not be portrayed as the preferred, acceptable, or only way to resolve conflict; or encourage
children to imitate dangerous acts which they may see on television. Any realistic depictions of violence will be
infrequent, discreet, of low intensity and will show the consequences of the acts. Other Content Guidelines: There will
be no profanity, nudity or sexual content.
G
General Audience - Violence Guidelines: Will contain very little violence, either physical or verbal or emotional. Will be
sensitive to themes which could frighten a younger child, will not depict realistic scenes of violence which minimize or
gloss over the effects of violent acts. Other Content Guidelines: There may be some inoffensive slang, no profanity and
no nudity.
PG
Parental Guidance - Programming intended for a general audience but which may not be suitable for younger children.
Parents may consider some content inappropriate for unsupervised viewing by children ages 8-13. Violence Guidelines:
Depictions of conflict and/or aggression will be limited and moderate; may include physical, fantasy, or supernatural
violence. Other Content Guidelines: May contain infrequent mild profanity, or mildly suggestive language. Could also
contain brief scenes of nudity.
14+
Programming contains themes or content which may not be suitable for viewers under the age of 14 - Parents are
strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Violence Guidelines: May
contain intense scenes of violence. Could deal with mature themes and societal issues in a realistic fashion. Other
Content Guidelines: May contain scenes of nudity and/or sexual activity. There could be frequent use of profanity.
18+
Adult - Violence Guidelines: May contain violence integral to the development of the plot, character or theme, intended
for adult audiences. Other Content Guidelines: May contain graphic language and explicit portrayals of nudity and/or
sex.
30
On-Screen Display (continued)
Locks (continued)
Canadian Ratings French Chart
G
General - Programming intended for audiences of all ages. Contains no violence, or the violence content is minimal
or is depicted appropriately with humor or caricature or in an unrealistic manner.
8 ans+
8 + General - Not recommended for young children - Programming intended for a broad audience but contains light
or occasional violence that could disturb young children. Viewing with an adult is therefore recommended for young
children (under the age of 8) who cannot differentiate between real and imaginary portrayals.
13 ans+
Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or
more sufficiently violent scenes to affect them. Viewing with an adult is therefore strongly recommended for children
under 13.
16 ans+
Programming is not suitable for children under the age of 16 - Contains frequent scenes of violence or intense
violence.
18 ans+
Programming restricted to adults - Contains constant violence or scenes of extreme violence.
Region 5 Alternate Ratings (Example Only)
G
General audiences. All ages admitted.
PG
Parental guidance suggested. Some material may not be suitable for children.
PG-13
Parents strongly cautioned. Some material may be inappropriate for children under 13.
R
Restricted. Under 17 requires accompanying parent or adult guardian.
NC-17
No one 17 and under admitted.
X
Adults only.
Y
Adults only.
NOTE
In order to set the Region 5 Ratings the ATSC Digital channel received must include Region 5 Ratings data. To see if the
channel has Region 5 Ratings, press the INFO key on the R/C. See fig. (1) below for reference.
O
nce the TV has received Region 5 Ratings data, the Region 5 option in the lock menu will display the data.
Program Title
Receiving
Audio Language
(Digital CH)/
Receiving NTSC
(Analog CH)
Program Time Digital Channel
Program Title
11:30 AM
11:55 AM
REGION 5
Multi
CF-18 ans+ DTVCC
Receiving
Rating Broadcast
Region 5
Rating
Cable 888-001
KDEF-DT
1080i
10:35 AM
D
Receiving
Digital Closed
Captions
Auto
Closed Caption Mode
Fig. (1) Channel Information
31
Source
CH ID/
Input ID
Current
Time
Receiving
Signal Format
On-Screen Display (continued)
ENGLISH
Timers
Select TIMERS to set your Clock and the Sleep Timer
Select “Timers” from the Menu list.
Audio/Video
Timers
Channel Manager
OR
Timers
Move
Setup
Move
SEL
SEL
0 : 00
Select
Select
Selected Items
Setup hint
Use the
Set The Clock*
- - : - - AM PST
Set Sleep Timer
◄►
button to highlight and setup the TIME ZONE settings.
If you observe daylight savings, use the
SAVING CORRECTION checkbox and the
◄►
+
Set The Clock
Locks
OK
button to highlight the DAYLIGHT
button to activate it.
◄►
Use the
button to highlight and setup the CURRENT TIME (hour and minute),
AM or PM, MONTH, DAY, and YEAR.
Select this feature to set your SLEEP TIMER from 30 minutes to 3 hours (30
Set Sleep Timer**
minute increments).
Use the
◄►
button repeatedly to set your Timer from 0:00, 0:30, 1:00, 1:30, 2:00,
2:30 and 3:00.
NOTE
* When AUTOMATICALLY ADJUST CLOCK FOR DAYLIGHT SAVING CHANGES is checked ü, the TV will
automatically calculate the clock adjustment for Daylight Saving.
* *The Sleep Timer info will show for 30 seconds before the TV turns off.
D
ash Button(-) can be used also to activate Sleep Timer.
32
On-Screen Display (continued)
Setup
Select SETUP when setting your TV up for the first time.
Select “Setup” from the Menu list.
Setup
Audio/Video
Set The OSD & Panel Options
Channel Manager
+
Set The Inputs
Locks
OR
Timers
Setup
Move
Set The Closed Captions
Reset The Software
Move
SEL
SEL
Select
Select
Selected Items
Set The OSD & Panel
Options
Setup hint
OSD
Contrast
Side
Panel
Color
“OSD Contrast” allows you to change the contrast of OSD based on 4
levels (min, low, medium and max).
Use
the ◄► button to highlight and setup the option of your choice.
Select MAX , MEDIUM, LOW or MIN depending of your choice of
contrast between letters/frame and background.
The “Side Panel Color” function turns the black side bars from black to
gray when watching 4:3 signals in Standard mode.
Use this feature to give a name to any of the four video inputs. Select
Game Name when playing with a Video game system to avoid delay
between picture and user control of the game machine.
Set The Inputs
Analog
Captions
Set The Closed Captions
Digital
Captions
Closed Captions are the dialogue, narration, and/or sound effects of a
television program or home video which are displayed on the TV screen.
Your local TV program guide denotes these programs as
or
.
Analog Captions are for Analog programs.
Caption Mode:
CAPTIONS is for the program you are viewing.
TEXT is for additional information such as news reports or a TV
program guide. This information covers the entire screen and viewing
the TV program is not possible. Text may not be available with every
program.
Channel:
1 is used for the primary language (usually English).
2,3,4 are sometimes used for a others languages(may vary by region).
Digital Captions are for digital programs.
This function will help choose and set available language, font, size,
color and background style of digital captions.
NOTE
Some types of digital closed captions will not work with this A/V Center.
C
aption Display will not work when viewing a 480i, 480p, 720p or 1080i input via the COMPONENT: Y-PBPR.
C
losed Caption and Digital Captions availability and content depends on the broadcaster. Closed Caption is
available when Closed Caption icon is displayed on screen.
Digital Captions language will not be available (grayed out) when using analog channels.
33
On-Screen Display (continued)
Selected Items
Reset The Software
ENGLISH
Setup (continued)
Setup hint
This feature shows software information and easy upgrade procedure.
This function allows the TV software to be upgraded by using a USB
flash drive. If a future software upgrade is required for your TV, HITACHI
will notify and provide proper instructions to get this upgrade. In order
to receive written notification, please complete and return the warranty
card.
1.-Insert the USB flash drive.
2.-Press the OK button to select UPGRADE NOW and start upgrading.
3.-Unplug the AC power cord when the UPGRADE is complete.
NOTE
ny power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the
A
upgrade procedure.
For further information about A/V Center software upgrade procedure, please contact 800-HITACHI or visits us
on the web: www.hitachi.us/tv
34
TROUBLESHOOTING
About LCD Display Technology
The following are common phenomena occurring when viewing LCD display devices due to its characteristics.
Please note that these are not malfunctions.
Defective Spots on Panel
The LCD panel is manufactured with high-precision technology. However, there might be some spots that are not
illuminated, or are brighter than others, or are in different colors, etc.
Surface on Panel
The LCD panel displays images by the fluorescent lamps internally. This can raise the temperature of the display
surface.
In addition, do not allow any heavy impact to the front of the panel because the LCD panel is made of high precision
glass.
Use Under Low Temperature Conditions
Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes slower
when the ambient temperature becomes too low. In some cases, this may result in a residual image.
The residual image will disappear of its own accord as the temperature rises again to a normal level.
Before calling a service technician, check the following tables first. If the problem cannot be solved with the
suggested procedures, contact 800-HITACHI. For your safety, NEVER try to repair the product yourself.
When the Following Messages Appear on the Screen
Message
Condition / Action
Power Save
This message comes from UT Monitor not A/V Center, indicates Monitor is in
Power Save Mode(example: if you turn off only A/V Center and Power Save
Mode is activated on UT Monitor).
The indicating lamp lights in orange on UT Monitor.
No Sync. Signal
The unit cannot detect any signals from any input terminals.
Check if the cable is connected correctly and firmly.
Check if the power of any external equipment is ON.
Check if the input selection matches the connection terminal.
Weak Signal or Channel not
available.
This shows the selected channel is not available.
Check the signal meter.
Page
14
~
15
28
Symptom and Checklist
Symptoms
35
Checklist
No picture - no sound
Check if the power of the A/V Center and UT Monitor or
external equipment is ON.
Check the connection of the power cord and/or other cables.
Check if the correct mode is selected.
Check if the UT Monitor is in “Standby mode” or “Power Save
mode”.
Adjust the values in “Picture” and “Audio” on UT Monitor
menu".
Multiple images-normal sound
Check the connections to external equipment.
Intermittent interference
Check if the source of interference is shielded correctly.
Move these kinds of electrical devices away from the unit.
Page
14
~
15
27
14
~
15
TROUBLESHOOTING (continued)
Symptoms
Checklist
Page
Check the volume level.
Normal picture, but no sound
button has been pressed or not.
Check if the
Check the connections to external equipment.
No picture - normal sound
Check the level of “Brightness” and “Contrast” in UT Monitor “Picture Menu”.
The remote control does not work.
Check if the batteries are installed correctly.
The batteries might be exhausted. Replace them with new ones.
Remove all obstructions from in front of the sensor window on the unit.
Picture Frezze and/or the buttons on
both the remote control and control
panel do not work.
Unplug and connect after 5 minutes the power cord or turn Main switch Off
and On after 5 minutes both A/V Center and UT Monitor.
Hold down the Reset button on the UT Monitor control panel for over a
second.
Normal picture but no color-normal sound
Check the connections to external equipment.
No picture
UT Monitor Indicating lamp → Off
Check if the power cord is plugged into the socket securely for UT Monitor.
Check if the main switch is on for UT Monitor.
No picture
UT Indicating lamp → Orange
It means that UT monitor is in “Power
Save mode”.
Check if the A/V Center to UT Monitor cable is connected correctly and
securely.
Check if the power of the A/V Center is ON.
Refer to “When the Following Messages Appears on the Screen”.
No picture
UT Monitor indicating lamp → Green
Check if the signal cable is connected correctly and securely.
Check if the A/V Center to UT Monitor cable is connected correctly and
securely.
Adjust the level of Brightness and Contrast lower.
The top of the unit and surface of the
panel heat up.
This may occur if you use the unit for a long time. Turn off the main power
to the unit for a while. Please note that this is not a malfunction.
ENGLISH
Symptom and Checklist (continued)
27 ,
14
~
15
13
14
~
15
10
14
14
35 ,
~
15
~
15
INFO
Some screen display aspects are not
possible.
Check the signal status by pressing the
button on the remote control.
The available screen display aspect is different depending on the current
signal status.
Some digital programming looks blurry
during fast changing scenes..
This is normal and its due regular digital compression scheme, please note
this is not a malfunction.
Turns Off by itself
Check or ensure Timer settings are not activated.
29
Picture may “block” or freeze when
watching a digital channel.
Check signal strength and noise levels under ”Signal Meter”
28
18
36
PRODUCT SPECIFICATIONS
SPECIFICATION
A/V Center dimensions
231(D) x 297(W) x 66(H) mm or less
9 1/16(D) x 11 11/16(W) x 2 9/16(H) in
Net weight
2.2 kg/ 4.85 lbs
Ambient
conditions
Temperature
Operating : 0°C to 40°C, Storage : -15°C to 60°C
Relative humidity
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply
AC120V, 60Hz
Power consumption/ at standby
22 W, 0.26 A/< 0.5 W
FCC Class
B for Consumer Use
1 Integrated Tuner
Input Terminals
2 Composite Video
and L/R Audio
2 Component Video
and L/R Audio
NTSC/ATSC/8VSB/64QAM/256QAM
Video
Composite 1.0 +/- 0.2 Vp-p
Input Impedance: 75 Ohm +/- 10%
Audio
470 mVrms, Max.: 2 Vrms or less
Input Impedance: 270KOhm or more
Video
Luminance (Y): 1.0 +/- 0.2 Vp-p
PBPR: 0.7 +/-0.14 Vp-p
Output
Terminals
USB 1.1
For S/W Upgrade only
1 HDMI V.1.3a
Resolution: 1080i/1080p
(Deep Color,x.v.Color™, Lip Sync, CEC, HDCP (High Bandwidth Digital Content
Protection)
Digital Audio
Optical
Front Key
Power On/Of switch
Yes
Power Indicator LED
2 LED's: StandBy (Red) / On (Blue)
222.1 (8-3/4)
230.8 (9-1/16)
60.1 (2-11/32)
65.7 (2-9/16)
Dimensions
Units: mm (inches)
222.1 (8-3/4)
230.8 (9-1/16)
60.1 (2-11/32)
65.7 (2-9/16)
297 ( 11-11/16)
297 ( 11-11/16)
Recommended Signal List
With Component input
480i(525i) @59.94/60Hz
480p(525p) @59.94/60Hz
1080i(1125i) @59.94/60Hz
720p(750p) @59.94/60Hz
37
With Composite input
-NTSC
480i(525i) @59.94Hz
SERVICE INFORMATION
ENGLISH
800.HITACHI
(800.448.2244)
Operational, hook up and
warranty questions for your product.
Monday ~ Sunday
8:00 am - 8:30 pm CST
www.hitachi.us/tv
HITACHI HOME ELECTRONICS
(AMERICA), INC.
HITACHI HOME ELECTRONICS
(CANADA)
HITACHI has made every effort to assure you hours of
trouble free operation from your Hitachi product.
Should you require service assistance with OPERATIONAL,
HOOK UP, TECHNICAL ASSISTANCE OR WARRANTY
SUPPORT, please contact our Support Hotline at 800.
HITACHI (800.448.2244).
Should you have any questions regarding warranty, service,
operation or technical assistance, please contact:
Our Support Hotline will provide you with the assistance you
need and if necessary the location of the nearest Authorized
Service Facility in your area. Please present proof of purchase
and/or delivery receipts to the Hitachi Authorized Service
Facility and service will be rendered in accordance with the
terms of the limited warranty as stated on your warranty card
or operating guide.
Hitachi Home Electronics
(America), Inc.
Customer Service Support
PO Box 3900
Peoria, IL 61612
[email protected]
In Canada: 800.HITACHI (800.448.2244)
Monday~ Friday 9:00 am – 7:00 pm EST
Saturday
9:00 am – 5:00 pm EST
Pour de plus amples renseignements sur le service durant la
période couverte par la garantie, sur le fonctionnement ou pour
de l’assistance technique communiquez avec:
Au Canada: 800.HITACHI (800.448.2244)
Lundi~ Vendredi 9:00 am – 7:00 pm L’EST
Samedi
9:00 am – 5:00 pm L’EST
Hitachi Home Electronics (Canada)
Customer Service Support
PO Box 3900
Peoria, IL 61612
Customer Record
The MODEL NAME and SERIAL NUMBER of this product is located underneath the set. Please follow the next
steps to find this information and then record it in the space provided below for use in case you call 800.HITACHI,
they will require this information in order to give you the proper support.
u Look on the BOTTOM side of the set
v Locate the label where it shows the
information related to MODEL NAME and
SERIAL #.
w 800.HITACHI will require this information
in order to give you the proper support
regarding your questions.
Model Name_________________
Serial Number _________________
38
LIMITED WARRANTY
Congratulations on your purchase of a new Hitachi display product.
Register your product online at www.hitachi.us/tv or mail the included warranty registration card:
CO
ON
LY
LCD Flat Panel Televisions
LCD Flat Panel Monitors
Plasma Televisions
Plasma Monitors
Audio Video Center
Conditions of Hitachi Limited Warranty
This Hitachi display product (the “Product”) is warranted to be free from defects in materials and workmanship
beginning on the date of purchase by the original owner and continuing for the duration of the applicable time
periods specified below. If the Product is found to be defective, Hitachi will repair or replace (at Hitachi’s option)
defective parts at no charge, subject to the conditions of this Limited Warranty. If the original owner rejects, refuses
or otherwise does not accept Hitachi’s offer to repair or replace such defective parts under this Limited Warranty, this
Limited Warranty shall be void and of no further force or effect. This Limited Warranty extends to the original owner
only and is not transferable, and such owner must provide a dated sales receipt for the Product to qualify for parts
or service under this Limited Warranty. The original owner must notify Hitachi of a defect claim during the applicable
Limited Warranty period for this Limited Warranty to be effective. This Limited Warranty is valid only in the U.S.A.
and Puerto Rico.
PARTS: The Limited Warranty period for parts is 1 year from the date of original purchase. During the Limited
Warranty period for parts, Hitachi will replace defective parts with new or rebuilt parts (at Hitachi’s option) at no
charge for such parts. Any replacement part will be warranted for the remainder of the original warranty period
applicable to the part replaced.
LABOR: The Limited Warranty period for labor is 1 years from the date of original purchase. During the Limited
Warranty period for labor, Hitachi will repair or replace (at Hitachi’s option) defective parts without charge for labor.
SERVICE LOCATION: In-home warranty service, which includes either in-home repair or free pick-up and delivery
(at Hitachi’s option), applies to all Products except: (i) 26-inch and smaller LCD Flat Panel Televisions or LCD Flat
Panel Monitors; (ii) Products located outside the U.S.A. or Puerto Rico; (iii) Products located more than seventy-five
(75) driving miles from Hitachi’s nearest Authorized Service Facility. If the foregoing clauses (i), (ii), (iii)apply, then
the Product owner will be responsible for bringing/delivering the Product to a Hitachi Authorized Service Facility and,
following warranty service, retrieving the Product from such Authorized Service Facility.
IN
LIMITED WARRANTY
Hitachi Home Electronics
(America), Inc. warrants
this product in accordance
with the terms and
conditions applicable to the
Products identified below:
CERTIFIED
SERVICE
CENTER
Hitachi is a proud supporter of the
Certified Service Center program.
Businesses who display the CSC
certification mark have demonstrated
that they operate in accordance with
the high standards of professionalism
prescribed by the Consortium for
Certified Service Centers.
A
TO .
800-HITACHI (800-448-2244)
Please call 800-HITACHI (800-448-2244) for operational, hook up, warranty questions or the location of your
nearest Hitachi Authorized Service Facility or Parts Distributor.
RI
U
D .
PU S.
ID
Visit our website and register your product online:
Hitachi’s website features a wealth of information on Hitachi products and technologies, as well as downloadable
operating guides and other useful information.
IMPORTANT:
Before using or installing your Product,
please complete this form and attach
your sales receipt and retain them for
your records. This will help facilitate
proper warranty coverage.
MODEL NO.
DEALER NAME
DEALER ADDRESS
CITY
ER
VA
L
To register your new Hitachi display product online, go to:
www.hitachi.us/tv
Support and Contact/Warranty Registration
SERIAL NO.
DATE OF PURCHASE
STATE
AN
Warranty Limitations
This Hitachi Limited Warranty does not cover:
A. Any Product that has been modified or repaired in a manner not previously authorized by Hitachi in writing.
B. Any Product whose serial number has been removed, altered, replaced, defaced or rendered illegible.
C. Any defect, malfunction, or failure caused by or resulting from improper or unauthorized service, maintenance or repair.
D. Damage resulting from abuse, misuse, mishandling, neglect or damage caused by exposure to hostile operating environments such as areas containing
dust and/or smoke.
E. Damage caused by power surges, accidents, natural disasters or any other events or circumstances outside Hitachi’s control.
F. Any Product used in any manner inconsistent with the acceptable set-up, usage, safety or installation configurations identified in the Product’s Operating
Guide.
G. Any Product used for purposes or applications, or subjected to operating conditions, other than those identified as acceptable in the Product’s Operating
Guide.
H. Product repairs (including any product whose case has been opened), or part replacements provided or installed, by any person other than an
Authorized Hitachi Service Facility Representative.
I. Improper uncrating, set-up or installation or any misadjustments caused by user-operated controls.
J. Any labor or costs associated with removing the Product from a custom cabinet or other specialized product installation that impedes direct and
immediate removal of the Product from the owner’s premises (must be arranged and paid by the owner).
K. Product cabinets, cabinet parts, knobs, batteries or accessories.
L. Product screens that have been cleaned by any method other than as specified in the Product’s Operating Guide.
M. Normal usage, degraded brightness caused by backlight aging and/or cell defects or ordinary wear and tear, including, without limitation, scratches or
marks on the Product’s screen, cabinet or the appearance of bright or dark screen pixels.
N. Any Product returned for service that is damaged due to improper packaging, mishandling or shipping. (IMPORTANT: When shipping any Product to a
Hitachi Authorized Service Centers, Product owner must package it securely in the original shipping container or its equivalent to prevent damage. The
Product must be returned with the shipping charges prepaid and proof of purchases included in the shipping container. Failure to properly package such
product during such shipment will void all warranties.)
O. Any Product purchased or serviced outside the United States of America and Puerto Rico.
P. Any Product that has been used for commercial purposes.
NO PERSON, AGENT, DISTRIBUTOR, DEALER, SERVICE FACILITY, OR COMPANY IS AUTHORIZED TO CHANGE, MODIFY OR AMEND THE TERMS OF THIS LIMITED
WARRANTY IN ANY MANNER WHATSOEVER. EXCEPT AS PROVIDED IN THIS LIMITED WARRANTY, HITACHI MAKES NO EXPRESS WARRANTY REGARDING THIS HITACHI
PRODUCT. FURTHER, ALL IMPLIED WARRANTIES RELATING TO ANY PORTION OF THIS PRODUCT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION SPECIFIED UNDER THIS LIMITED WARRANTY. HITACHI SHALL NOT BE LIABLE TO THE PURCHASER
OR TO ANY OTHER PERSON FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFIT OR PRODUCT RESULTING FROM ANY DEFECT IN, OR
MALFUNCTION OR FAILURE OF, THIS HITACHI PRODUCT. BECAUSE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR
THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY CONFERS SPECIFIC
LEGAL RIGHTS, INCLUDING CERTAIN OTHER RIGHTS THAT MAY VARY DEPENDING ON YOUR JURSIDICTION.
39
END USER LICENSE AGREEMENT FOR HITACHI SOFTWARE
END USER LICENSE AGREEMENT FOR HITACHI SOFTWARE
1.
2.
3.
LICENSE GRANT. HITACHI grants to you, for the life of the Product, a
non-exclusive, non-transferable, revocable license to install and use one
copy of the Software on the Product, subject to the following limitations and
restrictions:
a. You may not share, duplicate, republish or redistribute the Software;
b. You may not resell, rent, lease, sublicense, gift, loan, as sign or
otherwise transfer the Software or any of your rights under this
Agreement;
c.
You may not modify, adapt, translate, reverse engineer, decompile,
disassemble or make derivative works from the Software or use the
Software in combination with any non-Hitachi software; and
d. You may not use the Software for any commercial purpose.
VIOLATIONS; INDEMNITY. You understand and agree that your use of
the Software in any manner except as permitted under this Agreement
could constitute a serious crime and could subject you to damages and an
award to HITACHI of attorneys’ fees in connection with your violation of this
Agreement. You further understand that you may be held legally responsible
for any copyright infringement or other violation of intellectual property rights
caused or facilitated by your failure to abide by the terms of this Agreement.
You agree to defend, indemnify and hold HITACHI and its parent and affiliate
companies harmless from and against any and all liability resulting from any
breach by you of this Agreement.
INTELLECTUAL PROPERTY. The Software is protected by federal copyright
laws, international copyright treaties and other intellectual property laws and
treaties. The Software is licensed, not sold, to you. All right, title and interest
in and to the Software and any intellectual property associated therewith,
including any accompanying printed materials, shall belong to HITACHI
and its licensors and suppliers. Except as expressly provided herein,
neither HITACHI nor any of its licensors or suppliers grants to you under
this Agreement any express or implied right in or to any patents, copyrights,
trademarks, trade secrets or other intellectual property. All right, title and
interest in and to the intellectual property rights associated with any content
that is accessible through use of the Software shall belong to the applicable
content owners and may be protected by copyright or other intellectual
property laws and treaties. This Agreement grants you no rights to use such
content. Any rights of HITACHI not expressly granted to you hereunder are
reserved expressly by Hitachi.
4.
SOFTWARE UPGRADES. In the future, HITACHI may release or make
available one or more upgrades to the HITACHI Software (each, an
“Upgrade”). You understand and agree that if you decide to install or use
any Upgrade, your installation and use of such Upgrade and/or any other
software or intellectual property HITACHI may provide in connection
therewith shall be governed by the terms and conditions of this Agreement,
except to the extent that HITACHI provides different or supplementary
license terms or conditions that accompany such Upgrade or other software
or intellectual property. In the event HITACHI provides you with a “flash
card” or other media to effect or facilitate an Upgrade, you understand and
acknowledge that your failure to return such flash card or other media to
HITACHI as HITACHI may require could result in HITACHI placing your
name and your Product’s serial number on a “No Further Upgrades” list,
which will prohibit you from receiving any subsequent Upgrades HITACHI
may later release or make available. IF YOU DO NOT AGREE WITH ALL
THE TERMS AND CONDITIONS OF THIS AGREEMENT OR ALL THE
TERMS AND CONDITIONS OF ANY DIFFERENT OR SUPPLEMENTARY
LICENSE THAT MAY ACCOMPANY SUCH UPGRADE, (A) DO NOT USE
ANY HITACHI-PROVIDED FLASH CARD OR OTHER MEDIA, (B) DO NOT
PERFORM INSTALL ANY HITACHI-PROVIDED UPGRADE SOFTWARE
ON YOUR PRODUCT, AND (C) PROMPTLY RETURN SUCH FLASH CARD
OR OTHER MEDIA TO HITACHI.
5.
EXPORT RESTRICTIONS. HITACHI is licensing the Software for use
within North America only. You agree that you will not export or re-export
the Software. You specifically agree not to export or reexport the Software:
(i) to any country to which the U.S. has embargoed or restricted the export
of goods or services, which currently include, but are not necessarily limited
to Cuba, Iran, Libya, North Korea, Sudan and Syria, or to any national of
any such country, wherever located, who intends to transmit or transport the
Software back to such country; (ii) to any person or entity who you know or
have reason to know will utilize the Software in the design, development,
or production of nuclear, chemical, or biological weapons; or (iii) to any
person or entity who has been prohibited from participating in U.S. export
transactions by any federal agency of the U.S. government. You warrant
and represent that neither the U.S. Bureau of Industry and Security nor any
other U.S federal Agency has suspended, revoked, or denied your export
privileges.
6.
NO WARRANTIES. The software is provided to you in “as is” condition
and HITACHI makes no warranties of any kind whatsoever regarding the
software and, to the maximum extent permitted by law, hereby expressly
disclaims all warranties of any kind whatsoever, express or implied, with
respect to the software. All implied warranties, including without limitation,
the implied warranties of non-infringement, merchantability and fitness for
a particular purpose are hereby expressly disclaimed by HITACHI to the
maximum extent permitted by law.
7.
LIMITATION OF LIABILITY. To the maximum extent permitted by applicable
law, HITACHI, its licensors, suppliers, parent companies, affiliates,
subsidiaries, employees and agents shall not under any circumstances be
liable to you or any third parties for any damages of any nature arising in any
way from this agreement, your use of the software or otherwise, whether
indirect, special, incidental, consequential or otherwise, including, without
limitation, any claims for lost profits, lost good will, lost data, business
interruption, procurement of substitute goods or services, or expenditures
made or committed for in reliance on the continuation of this agreement,
even if advised in advance of the possibility of such damages.
8.
NO FAILURE OF ESSENTIAL PURPOSE. You agree that neither
HITACHI’S breach of this agreement nor its failure to repair a defect, error
or bug in the software shall constitute a failure of the essential purpose of
this agreement.
9.
CRYPTOGRAPHIC SOFTWARE. The software contains software
developed by the OpenSSL Project, including cryptographic software written
by eric young (the “cryptographic software”). The cryptographic software
is provided by the OpenSSL Project in “as is’’ condition and any express
or implied warranties, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose are hereby expressly
disclaimed to the maximum extent permitted by law. In no event shall the
OpenSSL Project, its contributors, HITACHI or any of its parent or affiliate
companies be liable for any direct, indirect, incidental, special, exemplary,
or consequential damages (including, but not limited to, procurement
of substitute goods or services; loss of use, data, or profits; or business
interruption) however caused and on any theory of liability, whether in
contract, strict liability, or tort (including negligence or otherwise) arising in
any way out of the use of the software or the cryptographic software, even if
advised in advance of the possibility of such damages.
ENGLISH
IMPORTANT – READ CAREFULLY: This End User License Agreement for
HITACHI Software (this “Agreement”) is a legal agreement between you (“you”
or “your”), in your capacity as the owner of a HITACHI brand display product
(the “Product”), and HITACHI Home Electronics (America), Inc. (“HITACHI”). By
using the Product or the HITACHI software installed on the Product (the “HITACHI
Software”) or any Upgrade (as defined below, and together with the HITACHI
Software, the “Software”), you agree to be bound by the terms and conditions
of this Agreement. IF YOU DO NOT AGREE TO BE BOUND BY THIS LICENSE
AGREEMENT, DO NOT USE THE PRODUCT OR THE SOFTWARE.
10. TERMINATION. HITACHI may terminate this Agreement immediately at any
time by providing notice to you.
11. GOVERNING LAW; SEVERABILITY. This Agreement will be governed
by the laws of the State of New York, and you consent to the exclusive
jurisdiction and venue in the federal courts sitting in the Southern District
of New York, unless no federal subject matter jurisdiction exists, in which
case you consent to the exclusive jurisdiction and venue in the Borough of
Manhattan, New York, USA.
40
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement