VisionRGB-E2
VisionRGB-E2
Dual Channel RGB/DVI/HD Capture Card
Advanced Graphics Display Technology
PCI Express
HD 1080p
HDMI 1080p
DVI - 1920x1200
RGB 2048x1536
DESCRIPTION
The VisionRGB-E2 has two complete capture channels
When the RGB/DVI data is displayed on a non Datapath
supporting up to 1920x1080 DVI or 2048x1536 Analog
graphics card, the VisionRGB-E2 sends the data to system
resolution.
memory or direct to the graphics card, dependant on the
software used for display.
The VisionRGB-E2 captures the Analog/DVI data and triple
buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or stream-
The VisionRGB-E2 is an ideal solution for applications that
ing.
require the capture of Analog or DVI sources in real time.
Typical applications include:
When a Datapath graphics card is used, the VisionRGB-E2
•
Viewing Analog or DVI sources from PCs, MACs,
Industrial/medical equipment, cameras and other video
transfers the data directly to the graphics card thereby
equipment
increasing performance. The VisionRGB-E2 sends the
relevant portions of each captured image to each display
•
Streaming video applications
channel and instructs each channel to use its graphics en-
•
Video/Data Wall Controllers
gine to render the data. This fully utilises the hardware and
dramatically increases performance.
FEATURES
•
•
Dual channel RGB/DVI/HD capture card (PCI-
For streaming applications, the VisionRGB-E2 can
Express)
be used with Windows Media Encoder to compress
Four Lane PCIe interface with a maximum data
rate of 480MB/sec
•
Maximum DVI capture resolution of 1920 x 1200 x
24bit
•
and stream captured video. To replay the video, use
Windows® Media Player.
Maximum analog RGB capture resolution of
2048 x 1536 x 24bit
•
RGB STREAMING
Any application compatible with Windows® DirectShow technology can use the VisionRGB-E2 due to
its built-in WDM support.
HD modes using the supplied DVI/ Component
Adapter or DVI/HDMI Adapter (HDCP not
supported)
•
On card processor for real time mode and sync
detection
•
SOFTWARE
Support for multiple cards allowing up to 32
capture channels. (16 cards)
The VisionRGB-E2 is supplied with a powerful
software application for configuring the timing and
format of the input sources and displaying the data.
•
Direct DMA driver software and streaming driver
•
•High quality down scaling
•
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8
automatically detect the video source format and
video formats
display the captured video in a window on your
High performance DMA to system memory or
desktop.
•
Simply connect your external DVI or Analog source
into the card, run the VisionRGB-E2 application to
direct to graphics memory with scatter gather
•
Support for separate H/V sync, Composite sync or
Sync on Green
•
16 cropping windows per capture channel
•
Includes WDM streaming drivers and the Datapath
Vision application software
•
Fully integrated with the Datapath Wall Control
MODELS AVAILABLE
Code
Description
VisionRGB-E2
Dual Channel Capture Card, PLUS 1
x DVI/VGA, 1 x DVI/component and
-red software for video wall applications.
•
1 x DVI/HDMI adapters
VisionRGB-E2 is also optimised for operation with
the Datapath range of graphics cards
•
•
Support for Windows® XP/Vista/Server 2003/
All products are shipped with the latest software
Server 2008/Windows® 7
available, unless stated otherwise.
Datapath SDK included for software developers
Special requirements may be organised by contacting
our Sales team.
SPECIFICATION
Board Format
PCI-e x4 half size plug-in card, 110mm x 170mm.
PCI-e bus master with scatter gather DMA providing maximum data rate of
480MB/s.
Connectors
Two DVI-I type connectors.
Maximum Sample Rate
170Mpixels per second analog RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling.
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video Capture Memory
64 MB, triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536,
custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x
1200, and custom modes.
HD Modes
1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector
(HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV: 4:2:2.
MONO: 8bit.
Update Rate
User defined, captured frame rate will match the source providing max data rate
(480MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts.
Video Format Options
Analog RGB plus HSync and VSync (5 wire).
Analog RGB with Composite Sync (4 wire).
Analog RGB with Sync on Green/YPbPr (3 wire).
DVI Single Link.
Operating System Support
Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008
and Windows® 7.
Power Requirements
Max current at +3.3V – 0.25A.
Max current at +12V – 1.2A.
Max power – 15 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions,
therefore the specification may change from time to time.
MAIN SALES DEPARTMENT
Datapath Limited,
Alfreton Road
Derby, DE21 4AD
England
Tel: (+44) (0) 1332 294441
Fax: (+44) (0) 1332 290667
email: sales@datapath.co.uk
Web: http://www.datapath.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising