Tower product sheet.cdr - mandla tata power solutions

Tower product sheet.cdr - mandla tata power solutions
TOWER
UPS Range
The Tower range of UPS units are designed and
manufactured in South Africa to meet South African
conditions and provide the highest reliability
possible in support of the critical types of loads it
supplies.
Sizes: Single phase input - 5kVA, 8kVA, 10kVA, 15kVA, 20kVA
Three phase input - 10kVA, 15kVA, 20kVA
Design features:
l
Protection circuits. The UPS are fully protected against internal and external faults
via circuit breakers and fast acting fuses.
l
Communication interface port. All units are supplied as standard with multi protocol
CPU communication which allows full function remote analysis from any computer
environment.
l
Digital display. Provides simultaneous information for input voltage, output voltage,
output current, output frequency and DC voltage.
l
Remote monitoring. Voltage free contacts are provided for connection to a remote
alarm panel or to the clients building management system.
l
Maintenance free batteries. Projected life spans of 3 to 5 year.
l
Service ability. The Tower ranges have been designed with service in mind. Ease of
access to parts, few PC cards and ease of replacement of power components sets this
design apart from other similar products.
ANDLA
POWER SOLUTIONS (PTY) LTD
Ensuring Continuous Power
TOWER RANGE TECHNICAL SPECIFICATIONS
MODEL
INPUT
OUTPUT
GENERAL
BATTERY
DIMENSIONS
COMPUTER
INTERFACE
Voltage (V AC)
Frequency (HZ)
Phase
Input Power Factor
Capacity
Voltage (V AC)
Rated Power Factor
Load Power Factor Range
Wave Form
Voltage Regulation
Overload Capability
Transient Response
Frequency Stability
Synchronization
Crest Factor
Static Switch Rating
Static Switch Transfer Time
Operating Temperature Range
Altitude
Noise
Lightning Protection
System Efficiency (AC/AC)
Type
Recharge Time
Discharge Time (Minimum)
Battery INT/EXT
(standard configuration)
Short Cabinet (mm)
TOWER Single Phase Output
TOWER Three Phase Output
230 Volt ± 15%
400/230 Volt ± 12%
50HZ ± 5%
50HZ ± 5%
Single phase
Three phase
up to 0,99
> 0,82
5kVA, 8kVA, 10kVA, 15kVA, 20kVA
10kVA, 15kVA, 20kVA
230 Volt, single phase
0,7 Lagging
0,5 Lagging to Unity within kW rating of unit
Sine Wave, THD <5% (no load to full load) - Typically 3%
±1%
200% for 15 seconds. Short circuit capability without damage
±5% under full load change and recovery within 30ms
±0.05% (Free Running)
Slew Rate: 1 HZ/sec.
3:1
1000% for 100ms
0ms
0° to 40° C, up to 90% humidity
0-2000m without derating
<50 dB (at 1 metre)
<52 dB (at 1 metre)
Designed to withstand standard test impulses of 6kV and 3kA
>95%
>90%
Maintenance Free Lead Acid
6 hours to 90%
From 8 minutes to 25 minutes depending on model
All models Internal
10kVA, 15kVA & 20kVA External
370 (W) x 650 (D) x 550 (H)
5kVA, 8kVA & 10kVA only
Includes battery for standard configuration
Tall Cabinet (mm)
370 (W) x 650 (D) x 850 (H)
370 (W) x 650 (D) x 850 (H)
Available all models
10kVA, 15kVA & 20kVA
Includes battery for standard configuration
External battery cabinet
Weights (kg)
5kVA (115kg), 8kVA (130kg),10kVA (155kg), 10kVA (95kg),
(Includes internal battery where applicable) 15kVA (195kg), 20kVA (220kg)
15kVA (120kg), 20kVA (150kg)
External Battery Cabinet (mm)
370 (W) x 650 (D) x 850 (H)
Weight of Battery Cabinet with three 260kg
sets of batteries
Interface Type
RS232 Interface
Protocol
MegaTec UPSilon software
SNMP Adaptability
External SNMP adapter available (option)
Standard Bundled Software
UPSilon for Novell Netware, Windows 98/2000, Windows NT
Optional Software
UPSilon for UNIX
NOTES
The above specifications are subject to change without prior notice.
Trademarks of MegaTec, UPSilon, Novell Netware, Windows, and UNIX, are registered trademarks of their respective companies.
DEALER / DISTRIBUTOR
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement