Bogen | HFSF1 | User manual | High-Fidelity, Small-Footprint Loudspeaker Spec

High-Fidelity,
Small-Footprint
Loudspeaker
Model HFSF1
Description
The Bogen HFSF1 High-Fidelity, Small-Footprint Ceiling Loudspeaker delivers superior sound in a very compact
enclosure. The speaker measures 7-1/4" diameter and mounts easily in all types of ceilings – including existing
hard-surfaced types and suspended type.
Several levels of power output can be controlled directly from the front baffle via a rotary tap selector switch
under the grille. The low-distortion, coaxial-design speaker, coupled with a computer-matched venting system,
delivers superb fidelity for music as well as high intelligibility for voice reinforcement. Coupled with the Bogen
CSUB Ceiling Subwoofer, it provides the perfect solution for environments that require the highest-quality
sound with minimal visual impact.
• Superior sound in a very compact enclosure
Features
• Wide-dispersion coaxial driver for broad, even
coverage; superb off-axis response
• Small footprint, visually appealing
• Only 7-1/4" face diameter
• Installs in wide range of ceiling types
• For 70V and low-impedance systems
• Selectable power taps via front-mounted control
(under grille); 16, 8, 4, 2, 1 watts at 70V
• 16-ohm Input setting for low-impedance systems
(Selectable via front-mounted control, under grille)
• Quick wiring with removable plug-in connector
• Plug-in connector provides loop-through terminals
for next speaker
• Terminal cover provides knockout for flexible conduit connection
• Compounded rubber surround for lasting performance year after year
• Integral mounting clamps tighten quickly and firmly
• Attachment point for seismic safety cable
• Off-white textured finish easily painted to match
room decor
• Available accessories: Tile Bridge Support (TBSF),
Safety Cable (CK10), both sold separately
Specifications subject to change without notice.
© 2008 Bogen Communications, Inc.
54-8023-38A 0807
Frequency Response*:
Technical
Specifications
78 Hz to 20 kHz
LF Driver:
4" Polypropylene cone with rubber surround
HF Driver:
3/4" Polycarbonate dome
Sensitivity (1W/1M):
86 dBspl
Impedance Ratings:
Low (16 ohms), High (70V)
Power Input (Max.):
50W at 16 ohms, 16W at 70V
Power Settings†:
Baffle/Bezel Material:
Back Enclosure:
Grille Material:
Color:
Terminations
Product Weight:
Dimensions:
70V: 16, 8, 4, 2, 1 Watts
Fire-rated (94V0) ABS
Heavy-gauge steel
Powder-coated, perforated metal
Off-white, paintable
4-Terminal Snap-lock input connector
4.5 lb.
7-1/4" Dia. × 7-1/2" D
Accessories Included:
Snap-lock input connector (1)
Steel terminal cover (1), with (2) mounting screws
Optional Accessories:
Suspension/Safety Cable (CK10)
Tile Bridge Support (TBSF)
* 1/2-Space response (ceiling-mounted), 16-ohm input
† Front panel, switch-selected
Architect &
Engineer
Specifications
The loudspeaker shall be a Bogen Model HFSF1 HighFidelity, Small-Footprint ceiling speaker or approved
equivalent, consisting of one 4" (nominal) low-frequency transducer; one 3/4" (nominal) high-frequency transducer; and a filter network for dividing frequencies
between the transducers. Frequency response shall be
78 Hz to 20 kHz. Sensitivity, measured 1 watt at 1
meter, shall be 86 dBspl. Max. power input shall be 50W
at 16 ohms, or 16W at 70V.
The front baffle shall be injection-molded ABS material
and the enclosure (back can) shall be plated steel. All
components shall be mounted inside the enclosure.
The baffle bezel shall be supplied in off-white with a mild
texture finish to promote paint adhesion, if desired. A
perforated steel speaker grille shall be provided, colormatched to the bezel.
The low-frequency driver shall utilize a molded
polypropylene diaphragm (cone). A compounded rubber surround shall be formulated to withstand environmental conditions with high or low heat, high or low
humidity, and ultra-violet light.
The high-frequency driver shall utilize a diaphragm consisting of black polycarbonate.
Integral swing-out clamps shall provide a secure installation in the ceiling surface. A safety cable attachment
point shall be included on the side of the steel enclosure. An optional 10-foot long cable kit shall be available
to serve as a backup safety cable (Model CK10). An
optional tile bridge support installation bracket shall
provide additional support when mounting the loudspeaker in suspended ceilings (Model TBSF).
The input connector shall be a 4-screw pluggable input
connector, providing loop-through terminals for additional speakers.
Power input selection shall be via a front-mounted
rotary switch, located under the removable grille. Highimpedance tap selections (70V) shall be 16, 8, 4, 2, and
1 watts. A low-impedance 16-ohm input shall also be
available via the rotary switch.
The speaker shall require a minimum vertical clearance
of 7-1/8" from the front surface of the ceiling. Overall
dimensions of the speaker shall not exceed 7-1/4"
Diameter × 7-1/2" Deep. Weight shall be 4.5 lb.
50 Spring Street, Ramsey, NJ 07446
201-934-8500 Fax: 201-934-9832
www.bogen.com