Horizon Fitness T6, T4 User manual

Horizon Fitness T6, T4 User manual
ELITE SERIES
AFG
FOR MODELS :
T4
T6
TREADMILL USER’S GUIDE
INTRODUCTION
IN T R O D U C T I O N
IMPORTANT
PRECAUTIONS
CONGRATULATIONS and THANK YOU for your purchase of this Elite Series AFG treadmill!
ASSEMBLY
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, an Elite Series treadmill
can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-motor warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
BEFORE
YOU BEGIN
The Elite Series AFG delivers.
Assembly
6
Before You Begin
12
Treadmill Operation
15
Conditioning Guidelines
28
Troubleshooting & Maintenance
35
Limited Warranty
38
Back Panel
LIMITED
WARRANTY
CONTACT INFORMATION
CONDITIONING
GUIDELINES
4
TROUBLESHOOTING
& MAINTENANCE
Important Precautions
TREADMILL
OPERATION
TABLE OF C O N T E N T S
INTRODUCTION
I M P O R TA N T S AFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
IMPORTANT
PRECAUTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Sears at the number listed on
the back cover of this manual.
ASSEMBLY
WARNING
Connect this exercise product to a properly grounded outlet only.
See grounding instructions.
BEFORE
YOU BEGIN
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
TREADMILL
OPERATION
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
CONDITIONING
GUIDELINES
This product is rated more than 15 amperes and is for use on a circuit having a nominal rating of 120 volts and
is factory-equipped with a specific electric cord and plug to permit connection to a proper electric circuit. Make
sure that the product is connected to an outlet having the same configuration as the plug. No adapter should
be used with this product. If the product must be reconnected for use on a different type of electric circuit, the
reconnection should be made by qualified service personnel.
TROUBLESHOOTING
& MAINTENANCE
WARNING
OPERATION
To reduce the risk of damaging important components on your treadmill, it is
strongly recommended that your treadmill is plugged into a dedicated 20 amp
circuit, without the use of an additional extension cord and/or power strip.
Failure to comply may void the warranty.
IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.
LIMITED
WARRANTY
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill
has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the
treadmill is warmed up to room temperature before first time use. Failure to do so may cause premature
electronic failure.
INTRODUCTION
To reduce the risk of injury to persons:
WARNING Stand on the siderails before starting the treadmill. Read Instruction
Manual before using. Remove safety key when not in use and store out of
reach of chidren.
Always unplug this appliance (or treadmill) from the electrical outlet
immediately after using and before cleaning.
• Use this appliance (or treadmill) only for its intended use
as described in this manual. Do not use attachments not
recommended by the manufacturer.
• Never operate this appliance (or treadmill) if it has a damaged
cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the appliance (or
treadmill) to a service center for examination and repair.
• Do not carry this appliance (or treadmill) by supply cord or use
cord as a handle.
• Keep the cord away from heated surfaces.
• Never operate the appliance (or treadmill) with the air openings
blocked. Keep the air openings free of lint, hair, and the like.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
• To disconnect, turn all controls to the off position, then remove
plug from outlet.
• Do not operate under blanket or pillow. Excessive heating can
occur and cause fire, electric shock, or injury to persons.
BEFORE
YOU BEGIN
• Close supervision is necessary when this appliance (or treadmill)
is used by, on, or near children, invalids, or disabled persons.
• Never use the treadmill before securing the
safety tether clip to your clothing.
• If you experience any kind of pain, including
but not limited to chest pains, nausea,
dizziness, or shortness of breath, stop
exercising immediately and consult your
physician before continuing.
• Do not wear clothes that might catch on any
part of the treadmill.
• Always wear athletic shoes while using this
equipment.
• Do not jump on the treadmill.
• Unplug treadmill before moving or cleaning
it. To clean, wipe surfaces down with soap
and slightly damp cloth only; never use
solvents. (See MAINTENANCE)
• At no time should more than one person be
on treadmill while in operation.
• The treadmill should not be used by persons
weighing more than 350 (T4) / 400 (T6)
pounds. Failure to comply will void the
warranty.
• The treadmill is intended for in-home use only.
Do not use this treadmill in any commercial,
rental, school or institutional setting. Failure
to comply will void the warranty.
• Do not use treadmill in any location that is
not temperature controlled, such as but not
limited to garages, porches, pool rooms,
bathrooms, car ports or outdoors. Failure to
comply may void the warranty.
TREADMILL
OPERATION
• An appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or
taking off parts.
ASSEMBLY
To reduce the risk of burns, fire, electrical shock or injury
to persons:
CONDITIONING
GUIDELINES
WARNING
To reduce the risk of electric shock:
TROUBLESHOOTING
& MAINTENANCE
DANGER
IMPORTANT
PRECAUTIONS
When using an electrical appliance, basic precautions should always be followed, including the following.
Read all instructions before using this appliance:
At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.
LIMITED
WARRANTY
SAVE THESE INSTRUCTIONS
INTRODUCTION
AS S E M B LY
IMPORTANT
PRECAUTIONS
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
WARNING
ASSEMBLY
During the assembly process of the treadmill there are several areas that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play
in the console masts or any forward and back play in the console assembly or handlebars. If there is any
play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the
assembly instructions must be reviewed and corrective actions should be taken.
BEFORE
YOU BEGIN
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering
on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its
side. Unpack the unit where it will be used. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN
INJURY!
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
Before proceeding, find your treadmill’s serial number
and model name located to the left of the on/off
power switch and power cord and enter it in the space
provided below.
TROUBLESHOOTING
& MAINTENANCE
enter your serial number and
model name in the boxes below:
SERIAL NUMBER:
MODEL NAME:
LIMITED
WARRANTY
* Refer to the serial number and model name when calling for service.
* Also enter this serial number on your Warranty Card.
INTRODUCTION
DISPLAY (T6 SHOWN)
GRIP PULSE HANDRAILS
IMPORTANT
PRECAUTIONS
CONSOLE
SAFETY KEY PLACEMENT
WATER BOTTLE HOLDER
CONSOLE MAST
HAND RAIL SLEEVE
HAND RAIL
ON/OFF SWITCH
CIRCUIT BREAKER
POWER CORD
ASSEMBLY
MOTOR COVER
RUNNING BELT / RUNNING DECK
TRANSPORT WHEEL
BEFORE
YOU BEGIN
SIDE RAIL
HAND RAIL BASE COVER
ROLLER END CAP
REAR ROLLER
ADJUSTMENT BOLTS
TREADMILL
OPERATION
TOOLS INCLUDED
CONDITIONING
GUIDELINES
5 mm Allen Wrench
6 mm T-wrench
8 mm T-wrench
Screwdriver
PARTS INCLUDED
TROUBLESHOOTING
& MAINTENANCE
2 Console Masts
2 Cup Holders
2 Hand Rail Sleeves
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
LIMITED
WARRANTY
1 Safety Key
1 Console Assembly
1 Power Cord
4 Hardware Bags
2 Hand Rails
2 Hand Rail Base Covers
INTRODUCTION
PR E - A S S E M B LY
note: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
IMPORTANT
PRECAUTIONS
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
AS S E M B LY S T E P 1
A Open PINK HARDWARE BAG.
PINK HARDWARE BAG CONTENTS :
ASSEMBLY
BOLT (A)
15 mm
Qty: 6
SPRING WASHER (B)
8 mm DIAMETER
Qty: 6
ARC WASHER (C)
8 mm Diameter
Qty: 6
B Connect the CONSOLE WIRES
from the BASE FRAME to the
bottom of the CONSOLE MAST.
BEFORE
YOU BEGIN
C Attach LEFT CONSOLE MAST
using 3 BOLTS (A), 3 SPRING
WASHERS (B) and 3 ARC
WASHERS (C).
CONSOLE MAST
D Repeat on other side.
TREADMILL
OPERATION
SPRING WASHER (B)
BOLT (A)
WASHER (C)
CONSOLE WIRES
CONDITIONING
GUIDELINES
BASE FRAME
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
* Note: Be careful not to pinch any
wires while assembling the masts.
INTRODUCTION
AS SEMBLY S T E P 2
BLUE HARDWARE BAG CONTENTS :
IMPORTANT
PRECAUTIONS
A Open BLUE HARDWARE BAG.
B Connect the CONSOLE WIRES
from the CONSOLE to those from
the top of the MAST.
BOLT (D)
20 mm
Qty: 2
SUGGESTED METHOD FOR STARTING BOLT
ASSEMBLY
C Attach CONSOLE to the
CONSOLE MASTS using
1 BOLT (D).
D Repeat on other side.
BEFORE
YOU BEGIN
E Tighten all console bolts.
F Snap each of the CUP HOLDERS
firmly into the CONSOLE.
CONSOLE
TREADMILL
OPERATION
* Note: Be careful not to pinch any
wires while assembling the console.
BOLT (D)
CONDITIONING
GUIDELINES
CONSOLE WIRES
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CUP HOLDER
INTRODUCTION
AS S E M B LY S T E P 3
WHITE HARDWARE BAG CONTENTS :
IMPORTANT
PRECAUTIONS
SCREW (G)
15 mm
Qty: 4
SPRING WASHER (I)
8 mm DIAMETER
Qty: 2
ASSEMBLY
SCREW (G)
HAND RAIL SLEEVE
HAND RAIL
SPRING WASHER (I)
BEFORE
YOU BEGIN
BOLT (H)
WASHER (J)
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
10
A Open WHITE HARDWARE BAG.
BOLT (H)
30 mm
Qty: 2
WASHER (J)
8 mm DIAMETER
Qty: 2
B Slide HAND RAIL SLEEVE over
the top of the hand rail.
C Attach top of HAND RAIL to
the console extension using 2
SCREWS (G).
D Attach bottom of HAND RAIL to
the base frame using 1 BOLT
(H), 1 SPRING WASHER (I) and
1 WASHER (J).
E Slide HAND RAIL SLEEVE firmly
against console.
F Repeat on other side.
INTRODUCTION
AS SEMBLY S T E P 4
A Open ORANGE HARDWARE BAG.
HAND RAIL TRANSITION PIECE
B Attach HAND RAIL BASE COVER to
the base frame using
2 SCREWS (K).
IMPORTANT
PRECAUTIONS
SCREW (K)
30 mm
Qty: 4
C Slide HAND RAIL TRANSITION
PIECE and HANDLEBAR into
CONSOLE.
ASSEMBLY
ORANGE HARDWARE BAG CONTENTS :
C Repeat on other side.
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
BEFORE
YOU BEGIN
D Be sure all bolts and screws are
tightened and secured on the
treadmill.
HAND RAIL BASE COVER
YOU’RE F I N I S H E D !
11
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
SCREW (K)
INTRODUCTION
B E F O R E Y O U BEGIN
IMPORTANT
PRECAUTIONS
CONGRATULATIONS! on choosing your treadmill. You’ve taken an important step in developing and
sustaining an exercise program! Your treadmill is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
Here are just a few of the health benefits of exercise:
ASSEMBLY
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new treadmill will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your treadmill in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
BEFORE
YOU BEGIN
LOCATION OF THE TREADMILL
TREADMILL
OPERATION
Place the treadmill on a level surface. There should be 6 feet of clearance
behind the treadmill, 3 feet on each side and one foot in front for folding
and the power cord. Do not place the treadmill in any area that will block
any vent or air openings. The treadmill should not be located in a garage,
covered patio, near water or outdoors.
1 foot
3 feet
3 feet
WARNING
CONDITIONING
GUIDELINES
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt.
Place your feet on the side rails before starting the treadmill. Start
walking on the belt only after the belt has begun to move. Never start the
treadmill at a fast running speed and attempt to jump on!
6 feet
TROUBLESHOOTING
& MAINTENANCE
SAFETY KEY
Your treadmill will not start unless the safety key is placed in position. Attach the clip end securely to your
clothing. This safety key is designed to cut the power to the treadmill if you should fall. Check the operation
of the safety key every 2 weeks.
LIMITED
WARRANTY
WARNING
12
NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT
COME OFF YOUR CLOTHING.
INTRODUCTION
PROPER USAGE
Do not operate the treadmill if the power cord or plug is damaged.
If the treadmill appears to not be working properly, do not use the treadmill.
ASSEMBLY
WARNING
IMPORTANT
PRECAUTIONS
Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in
small increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When
not in use, remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow
the MAINTENANCE schedule in this manual. Keep your body and head facing forward. Do not attempt to turn
around or look backwards while the treadmill is running. Stop your workout immediately if you feel pain, faint,
dizzy or are short of breath.
MOVING
TROUBLESHOOTING
& MAINTENANCE
Our Treadmills are heavy, use care and additional help if necessary when moving.
Failure to follow these instructions could result in injury.
13
LIMITED
WARRANTY
WARNING
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
BEFORE
YOU BEGIN
Your treadmill has a pair of transport wheels built
into the frame. To move, firmly grasp the rear of the
frame and carefully lift.
INTRODUCTION
­TENSIONING THE RUNNING BELT
IMPORTANT
PRECAUTIONS
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment.
CAUTION: Running belt should NOT be moving during
tensioning. Over-tightening the running belt can
cause excessive wear on the treadmill as well as its
components. Never over-tighten the belt.
ASSEMBLY
If you can feel a slipping sensation when running on the
treadmill, the running belt must be tightened. In most
cases, the belt has stretched from use, causing the
belt to slip. This is a normal and common adjustment.
To eliminate this slipping, turn the treadmill off
and tension both the rear roller bolts using the
supplied Allen wrench, turning them 1/4 TURN to the
right as shown. Turn the treadmill on and check for
slipping. Repeat if necessary, but NEVER TURN the
roller bolts more than 1/4 turn at a time. Belt is properly
tensioned when the slipping sensation is gone.
BEFORE
YOU BEGIN
CENTERING THE RUNNING BELT
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment. Before operating the
treadmill, make sure the belt is centered and remains
centered to maintain smooth operation.
TREADMILL
OPERATION
CAUTION: Do not run belt faster than 1/2 mph while
centering. Keep fingers, hair and clothing away from
belt at all times.
If the running belt is too far to the right side:
CONDITIONING
GUIDELINES
Belt is too far to the right side
With the treadmill running at 1/2 mph, turn the right
adjustment bolt clockwise 1/4 turn at a time (using
the supplied Allen wrench). Check the belt alignment.
Allow belt to run a full cycle to gauge if more adjustment
is needed. Repeat if necessary, until the belt remains
centered during use.
TROUBLESHOOTING
& MAINTENANCE
If the running belt is too far to the left side:
Belt is too far to the left side
LIMITED
WARRANTY
14
With the treadmill running at 1/2 mph, turn the right
adjustment bolt counter-clockwise 1/4 turn at a time
(using the supplied Allen wrench). Check the belt
alignment. Allow belt to run a full cycle to gauge if more
adjustment is needed. Repeat if necessary, until the
belt remains centered during use.
(T4 model)
G
A
D
B
12 %
12 MPH
11 %
11 MPH
TIME
USER 1
INCLINE / PULSE
9 MPH
PRESS TO SWITCH
USER 2
SPEED / CALORIES
8 MPH
7%
7 MPH
6%
6 MPH
5%
5 MPH
P1: MANUAL
4%
P2: INTERVALS
P3: MTN CLIMB
3%
P5: PEAK INTERVALS
P6: PACER
4 MPH
P8: CUSTOM
3 MPH
CHANGE DISPLAY
2%
BACK
1%
2 MPH
ENTER
INCLINE
J
1 MPH
SPEED
PRESS TO
CONFIRM
INCLINE
M
P4: WEIGHT LOSS
P7: THR ZONE
H
START
STOP
QUICK START
HOLD TO RESET
E
I
ASSEMBLY
9%
L
10 MPH
DISTANCE
C L O C K / D AT E
F
BEFORE
YOU BEGIN
10 %
8%
IMPORTANT
PRECAUTIONS
C
B
INTRODUCTION
TR E A D M I L L O P E R AT ION
PRESS TO
CONFIRM
SPEED
K
O
N
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
TREADMILL
OPERATION
A) eTRak™ button: Used to scroll through eTRAK™ display modes.
B) led Display WINDOWS: Displays Incline, Pulse, Distance, Speed, Calories, Date and Clock.
C) large LED WINDOW: Displays program profiles.
D) ALPHA-NUMERIC WINDOW: Indicates exercise feedback and help text.
CONDITIONING
GUIDELINES
E) Start: Press to begin exercising, starts your program, or resume exercising after pause.
F) Stop: Press to pause/end your workout. Hold for 3 seconds to reset the treadmill.
g) USER keys: Press to select user.
H) Quick program keys: Press to select program. Press ENTER to confirm selection.
J) Incline ARROW Keys: Used to adjust incline in small increments (0.5% increments).
K) Speed ARROW Keys: Used to adjust speed in small increments (0.1 mph increments).
L) QUICK ADJUST Incline Keys: Used to reach desired incline quickly. Press before INCLINE CONFIRMATION
KEY.
M)incline confirmation key: Press to confirm quick adjust incline selection, necessary only when INCREASING
incline.
N) QUICK ADJUST speed Keys: Used to reach desired speed quickly. Press before SPEED CONFIRMATION KEY.
O) speed confirmation key: Press to confirm quick adjust speed selection, necessary only when INCREASING
speed.
15
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
I) programming button: Used to select Program, Level and Time, and other options. Press to change display
feedback during workout.
INTRODUCTION
M O N I T O R D I S P L AY S
IMPORTANT
PRECAUTIONS
TIME
DISTANCE
C L O C K / D AT E
INCLINE / PULSE
SPEED / CALORIES
ASSEMBLY
time • Shown as Minutes:Seconds and Hours:Minutes. View the time remaining or the time elapsed in
your workout. eTRAK operation displays Average:Last:Monthly:Weekly if over one hour.
incline • Shown as Percent. Indicates the incline of your walking or running surface.
BEFORE
YOU BEGIN
PULSE • Shown as Beats Per Minute. Used to monitor your heart rate (displayed when contact is made
with both pulse grips or wireless chest strap is used)
distance • Shown as Miles. Indicates distance traveled during your workout.
speed • Shown as MPH. Indicates how fast your walking or running surface is moving.
TREADMILL
OPERATION
Calories • Total Calories burned during your workout.
CLOCK • The clock displays the time of day.
DATE • Date format is month and date.
PROGRAM PROFILES • Represents the profile of the program being used (speed during speed based
CONDITIONING
GUIDELINES
programs and incline during incline based programs).
HE A R T R AT E
PULSE GRIPS
TROUBLESHOOTING
& MAINTENANCE
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Keep a
loose, cupping hold. You may experience an erratic readout if consistently holding the grip pulse handlebars.
Make sure to clean the pulse sensors to ensure proper contact can be maintained. (See page 36).
LIMITED
WARRANTY
16
INTRODUCTION
GETTING STA R T E D / S E L E C T I N G A P R O G R A M
IMPORTANT
PRECAUTIONS
1) Check to make sure nothing is on or will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing.
ASSEMBLY
5) Insert the safety key into the safety keyhole in the console.
6) You have two options to start your workout:
quick start up
Simply press the start key to begin working out. OR...
BEFORE
YOU BEGIN
SELECT A PROgram
Select a Program using the QUICK PROGRAM KEYS keys.
Once a program has been chosen, press enter.
SELECT A LEVEL
TREADMILL
OPERATION
Select a program level using the arrow keys on the PROGRAMMING button.
Once a program level has been chosen, press enter.
SELECT A TIME
Select a Time using the arrow key on the PROGRAMMING button or use the default time.
Once a time has been chosen, press Start.
finishing YOUR WORKOUT
CONDITIONING
GUIDELINES
When your workout is complete, you will hear a series of beeps. Your workout information will be displayed for
30 seconds and then reset.
CLEAR CURRENT SELECTION
17
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
To clear the current program selection or screen, hold the Stop button for 3 seconds.
INTRODUCTION
PR O G R A M I N F O R M AT I O N
Warm-up and cool-down last 5:00 minutes each and are included in program times (except PACER program).
MANUAL
IMPORTANT
PRECAUTIONS
INTERVALS
PMANUAL
ROGRAM: MANUAL
ROLLING
Allows ‘On TheINTERVALS
Fly’ manual speed and incline changes. Time-based goal.
WEIGHT LOSS
MANUAL
ROLLING
GOLF
PINTERVALS
R OCOURSE
G R A M : I N T E R VA L S
WEIGHT
LOSS
ASSEMBLY
RACE
Walk or run a ROLLING
series
of alternating speed levels. Time-based goal with 10 difficulty levels to choose from.
GOLF
COURSE
WEIGHT LOSS
CUSTOM 1
RACE
INTERVALS Program Segments
(peak segments last 30 seconds, valley segments last 90 seconds)
2
3
4
2.0
4.0
2.0
4.0
2.0
4.5
2.0
4.5
2.5
5.0
2.5
5.0
Level 4
CUSTOM
1.3 1
1.9
2.5
5.5
2.5
5.5
Level 5
THR1.5
ZONE 12
THR
ZONE
1.5
CUSTOM 2
1.8
VALLEY
THR
ZONE 2
1.8
2.3
3.0
6.0
3.0
6.0
2.3
3.0
6.5
3.0
6.5
2.6
3.5
7.0
3.5
7.0
2.6
3.5
7.5
3.5
7.5
THR2.0
ZONE 1
TOUR
VALLEY
2.0
3.0
4.0
8.0
4.0
8.0
3.0
4.0
8.5
4.0
8.5
BEFORE
YOU BEGIN
Level 1
Level 2
Level 6
Level 7
TREADMILL
OPERATION
Level 8
Level 9
Level 10
COOL DOWN
SEGMENTS ARE REPEATED UNTIL SELECTED
TIME IS REACHED
1
Level 3
GOLF COURSE
WARM-UP
CUSTOM
CUSTOM 12
1.0
1.5
RACE
1.0
1.5
CUSTOM
THR1.3ZONE2 1
1.9
MPH
1.5
1.0
1.5
1.0
1.9
1.3
1.9
1.3
2.3
1.5
2.3
1.5
2.6
1.8
2.6
1.8
3.0
2.0
3.0
2.0
PEAK
THR
ZONE 2
INTERVALS
TOUR
MOUNTAIN
PEAK
CLIMB
PVALLEY
R O G R A M : M O U N TA I N C L I M B
INTERVALS
CONDITIONING
GUIDELINES
Simulates climbing
MOUNTAINa mountain by automatically varying incline.
TOUR
CLIMB
10 difficulty levels
to choose from.
PEAK
INTERVALS
Level
TROUBLESHOOTING
& MAINTENANCE
1
2
3
4
5
6
7
8
9
10
LIMITED
WARRANTY
18
WARM -UP MOUNTAIN
CLIMB
0.0
0.0
1
2
3
4
1.0
1.5
2.0
2.5
0.0
0.0
1.5
2.0
2.5
3.0
0.0
1.0
2.0
2.5
3.0
0.0
1.5
2.5
3.0
0.0
1.5
3.0
3.5
0.0
1.5
3.5
0.0
1.5
0.0
5
6
7
8
9
10
COOL-DOWN
3.0
3.0
2.5
2.0
1.5
1.0
0.0
0.0
3.5
3.5
3.0
2.5
2.0
1.5
0.0
0.0
3.5
4.0
4.0
3.5
3.0
2.5
2.0
1.0
0.0
3.5
4.0
4.5
4.5
4.0
3.5
3.0
2.5
1.5
0.0
4.0
4.5
5.0
5.0
4.5
4.0
3.5
3.0
1.5
0.0
4.0
4.5
5.0
5.5
5.5
5.0
4.5
4.0
3.5
1.5
0.0
4.0
4.5
5.0
5.5
6.0
6.0
5.5
5.0
4.5
4.0
1.5
0.0
2.0
4.5
5.0
5.5
6.0
6.5
6.5
6.0
5.5
5.0
4.5
2.0
0.0
0.0
2.0
5.0
5.5
6.0
6.5
7.0
7.0
6.5
6.0
5.5
5.0
2.0
0.0
0.0
2.0
5.5
6.0
6.5
7.0
7.5
7.5
7.0
6.5
6.0
5.5
2.0
0.0
Incline
INTRODUCTION
ROLLING
MANUAL
WEIGHT LOSS R A M : W E I G H T L O S S
PROG
INTERVALS
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
1
2
3
4
5
6
7
8
1.5
1.5
1.0
0.5
0.5
0.5
1.0
1.5
0.5
0.0
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
1.5
1.0
0.0
COOL-DOWN
Elevation
GOLF COURSE0.0
0.5
1.5
1.5
1.0
0.5
0.5
0.5
1.0
1.5
0.5
Speed
CUSTOM 2 1.3
Elevation
0.5
RACE
Speed
1.5
1.9
2.5
3.0
3.5
4.0
4.5
4.0
3.5
3.0
1.9
1.3
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
1.0
0.5
2.3
3.0
3.5
4.0
4.5
5.0
4.5
4.0
3.5
2.3
1.5
Elevation
THR ZONE 1 0.5
CUSTOM 1 1.8
Speed
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
1.0
0.5
2.6
3.5
4.0
4.5
5.0
5.5
5.0
4.5
4.0
2.6
1.8
Elevation
1.0
THR ZONE 2
Speed
2.0
CUSTOM 2
Elevation
1.0
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
1.5
1.0
3.0
4.0
4.5
5.0
5.5
6.0
5.5
5.0
4.5
3.0
2.0
VALLEY
Speed
Elevation
THR ZONE 1
Speed
TOUR
Elevation
THR
ZONE 2
PEAK
Speed
INTERVALS
Elevation
2.3
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
1.5
1.0
3.4
4.5
5.0
5.5
6.0
6.5
6.0
5.5
5.0
3.4
2.3
1.5
1.5
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
2.0
2.5
3.8
5.0
5.5
6.0
6.5
7.0
6.5
6.0
5.5
3.8
2.5
1.5
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
2.0
1.5
2.8
4.1
5.5
6.0
6.5
7.0
7.5
7.0
6.5
6.0
4.1
2.8
2.0
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
2.5
2.0
Speed
MOUNTAIN 3.0
VALLEY
CLIMB
Elevation
2.0
4.5
6.0
6.5
7.0
7.5
8.0
7.5
7.0
6.5
4.5
3.0
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
2.5
2.0
4.9
6.5
7.0
7.5
8.0
8.5
8.0
7.5
7.0
4.9
3.3
Speed
TOUR
3.3
ASSEMBLY
Level 1
WARM-UP
WEIGHT LOSS
Elevation
0.0
0.5
CUSTOM 1
Speed
1.0
1.5
BEFORE
YOU BEGIN
IMPORTANT
PRECAUTIONS
GOLFvarious
COURSE combinations of hills and valleys (incline & SPEED levels). Time-based goal with 10
Challenges with
difficulty levels to choose from.
ROLLING
PROGRAM SEGMENTS 30 SECS EACH
RACE
INTERVALS R A M : P E A K I N T E R VA L S
PROG
TREADMILL
OPERATION
PEAK
MOUNTAIN
An intervalCLIMB
program that challenges you with changing speeds and inclines.
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
1:30
:30
1:30
:30
1:30
:30
2
3
4
5
6
7
8
Cool Down
Elevation
1.0
1.5
1.0
2.0
1.0
2.0
1.0
2.5
1.0
2.5
1.5
1.0
Speed
1.0
1.5
2.0
4.0
2.0
4.0
2.0
4.5
2.0
4.5
1.5
1.0
Elevation
1.0
1.5
1.0
2.5
1.0
2.5
1.5
3.0
1.5
3.0
1.5
1.0
Speed
1.0
1.5
2.0
4.5
2.0
4.5
2.5
5.0
2.5
5.0
1.5
1.0
Elevation
1.0
1.5
1.5
3.0
1.5
3.0
1.5
3.5
1.5
3.0
1.5
1.0
Speed
1.3
1.9
2.5
5.0
2.5
5.0
2.5
5.5
2.5
5.5
1.9
1.3
Elevation
1.0
1.5
1.5
3.5
1.5
3.0
2.0
4.0
2.0
4.0
1.5
1.0
Speed
1.3
1.9
2.5
5.5
2.5
5.5
3.0
6.0
3.0
6.0
1.9
1.3
Elevation
1.5
2.0
2.0
4.0
2.0
4.0
2.0
4.5
2.0
4.5
2.0
1.5
Speed
1.5
2.3
3.0
6.0
3.0
6.0
3.0
6.5
3.0
6.5
2.3
1.5
Elevation
1.5
2.0
2.0
4.5
2.0
4.5
2.0
5.0
2.0
5.0
2.0
1.5
Speed
1.5
2.3
3.0
6.5
3.0
6.5
3.5
7.0
3.5
7.0
2.3
1.5
Elevation
1.5
2.5
2.0
5.0
2.0
5.0
2.0
5.5
2.0
5.5
2.5
1.5
Speed
1.8
2.6
3.5
7.0
3.5
7.0
3.5
7.5
3.5
7.5
2.6
1.8
Elevation
1.5
2.5
2.0
5.5
2.0
5.5
2.0
6.0
2.0
6.0
2.5
1.5
Speed
1.8
2.6
3.5
7.5
3.5
7.5
4.0
8.0
4.0
8.0
2.6
1.8
Elevation
2.0
3.0
2.5
6.0
2.5
6.0
2.5
6.5
2.5
6.5
3.0
2.0
Speed
2.0
3.0
4.0
8.0
4.0
8.0
4.0
8.5
4.0
8.5
3.0
2.0
Elevation
2.0
3.0
2.5
6.5
2.5
6.5
2.5
7.0
2.5
7.0
3.0
2.0
Speed
2.0
3.0
4.0
8.5
4.0
8.5
4.5
9.0
4.5
9.0
3.0
2.0
CONDITIONING
GUIDELINES
Level 2
:30
1
TROUBLESHOOTING
& MAINTENANCE
Level 1
1:30
19
LIMITED
WARRANTY
Warm Up
WEIGHT LOSS
INTRODUCTION
GOLF COURSE
GOLF COURSE
PRACE
ROGRAM: PACER
RACE
CUSTOM 1
Trains you to run at a steady “race pace” Enter in the distance plus the time limit, and the program calculates
CUSTOM 1
a steady pace.
IMPORTANT
PRECAUTIONS
CUSTOM 2
CUSTOM 2
THR ZONE 1
PROGRAM: THR ZONE
THR ZONE 1
(Requires wireless transmitter, T4: sold separately)
THR ZONE 2
ZONE 2 incline to maintain your Target Heart Rate. Perfect for simulating the intensity of your
AutomaticallyTHRadjusts
favorite sport VALLEY
or everyday activity. Time-based goal.
ASSEMBLY
VALLEY
1. OnceTOUR
the THR ZONE program has been chosen, press enter.
2.
TOUR
PEAK
INTERVALS
Choose
PEAK a target heart rate using the arrow keys on the programming button
Note:INTERVALS
Use the chart provided in this guide, to determine your target heart rate.
MOUNTAIN
CLIMB
MOUNTAIN
CLIMB
and press enter.
BEFORE
YOU BEGIN
3. Choose the desired time using the speed arrow keys and press enter.
4. Press Start to begin your program.
TREADMILL
OPERATION
In this program, the large LED dot matrix window displays your heart rate during exercise. The middle row
represents your target heart rate (THR) and the other rows equal +/-2 heart beats. If you are working out
beneath your THR, the LEDs below the middle row will illuminate. If you are over, the LEDs above the middle
row will illuminate. Your current heart rate is represented by the flashing column and the window will refresh
every 5 seconds.
NOTE: If no heart rate is detected, the large LED window will display the incline profile.
CONDITIONING
GUIDELINES
After the 5 minute warm-up period, the incline level will increase gradually to get the user to the entered
target heart rate zone. Once the user is at the target heart rate zone (plus or minus 5 beats per minute)
the incline level will remain until you would rise above or drop below you target heart rate zone at which
time the incline would adjust accordingly. The last 5 minutes of the program will begin the cool down period. At
this time, the program will gradually decrease the resistance level to give the user a smooth cool down.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
20
INTRODUCTION
RACE
CUSTOM 1
PROGRAM:
CUSTOM
Lets you createCUSTOM
and 2reuse a perfect workout for you with specific speed, incline and time combination.
The ultimate in personal programming. Time-based goal.
IMPORTANT
PRECAUTIONS
THR ZONE 1
1. Once the CUSTOM program has been chosen, press enter
THR ZONE 2
2. Choose the desired time using the programming arrow keys and press
enter.
VALLEY
3. Choose
TOUR the desired speed for each segment, using the arrow keys and press
ASSEMBLY
enter. Note: You will need to press enter after each segment.
PEAK
INTERVALS
4. Choose
the desired incline for each segment, using the arrow keys and
MOUNTAIN
CLIMB
press
enter. Note: You will need to press enter after each segment.
5. Press Start to begin your program. At this time, your program has been
BEFORE
YOU BEGIN
successfully saved into memory, and can be used for future workouts.
• To reset your program information and delete it from memory, press and hold
the enter key for 5 seconds.
21
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
• While using your saved program, you are able to adjust the speed or incline, but
any changes will not be saved.
INTRODUCTION
T R E A D M I L L O PERATION
C
B
(T6 model)
G
A
D
B
IMPORTANT
PRECAUTIONS
12 MPH
15 %
HEART RATE
13 %
11 %
CALORIES
TIME
10 MPH
DISTANCE
9%
9 MPH
C L O C K / D AT E
USER 1
INCLINE
8%
PRESS TO SWITCH
USER 2
SPEED / PACE
8 MPH
ASSEMBLY
7%
7 MPH
6%
6 MPH
5%
5 MPH
4%
P1: MANUAL
P7: THR ZONE 1
3%
P2: INTERVALS
P3: MTN CLIMB
P8: THR ZONE 2
BACK
1%
P5: PEAK INTERVALS
P8:CUSTOM
CUSTOM1
P9:
BEFORE
YOU BEGIN
J
4 MPH
P6: PACER
P10: CUSTOM 2
3 MPH
2 MPH
ENTER
INCLINE
1 MPH
SPEED
PRESS TO
CONFIRM
INCLINE
M
P4: WEIGHT LOSS
CHANGE DISPLAY
2%
L
11 MPH
H
START
STOP
QUICK START
HOLD TO RESET
E
I
F
PRESS TO
CONFIRM
SPEED
K
O
N
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
TREADMILL
OPERATION
A) eTRak™ button: Used to scroll through eTRAK™ display modes.
B) led Display WINDOWS: Displays Heart Rate, Calories, Time, Distance, Incline, Speed, Pace, Clock and
Date.
C) large LED WINDOW: Displays program profiles.
D) ALPHA-NUMERIC WINDOW: Indicates exercise feedback and help text.
CONDITIONING
GUIDELINES
E) Start: Press to begin exercising, starts your program, or resume exercising after pause.
F) Stop: Press to pause/end your workout. Hold for 3 seconds to reset the treadmill.
g) USER keys: Press to select user.
H) Quick program keys: Press to select program. Press ENTER to confirm selection.
TROUBLESHOOTING
& MAINTENANCE
I) programming button: Used to select Program, Level and Time, and other options. Press to change display
feedback during workout.
J) Incline ARROW Keys: Used to adjust incline in small increments (0.5% increments).
K) Speed ARROW Keys: Used to adjust speed in small increments (0.1 mph increments).
L) QUICK ADJUST Incline Keys: Used to reach desired incline quickly. Press before INCLINE CONFIRMATION
KEY.
LIMITED
WARRANTY
M)incline confirmation key: Press to confirm quick adjust incline selection, necessary only when INCREASING
incline.
N) QUICK ADJUST speed Keys: Used to reach desired speed quickly. Press before SPEED CONFIRMATION KEY.
22
O) speed confirmation key: Press to confirm quick adjust speed selection, necessary only when INCREASING
speed.
INTRODUCTION
MONITOR D I S P L AY S
HEART RATE
TIME
IMPORTANT
PRECAUTIONS
CALORIES
DISTANCE
C L O C K / D AT E
INCLINE
SPEED / PACE
ASSEMBLY
Heart rate • Shown as BPM. Indicates your heart rate while walking or running.
Calories • Total Calories burned during your workout.
time • Shown as Minutes:Seconds and Hours:Minutes. View the time remaining or the time elapsed in
your workout.
BEFORE
YOU BEGIN
distance • Shown as Miles. Indicates distance traveled during your workout.
incline • Shown as Percent. Indicates the incline of your walking or running surface.
speed • Shown as MPH. Indicates how fast your walking or running surface is moving.
PACE • Shown as Minutes.Tenths of a Minute. Indicates the time to run a mile at the current speed.
CLOCK • The clock displays the time of day.
DATE • Date format is month and date.
PROGRAM PROFILES • Represents the profile of the program being used (speed during speed based
TREADMILL
OPERATION
programs and incline during incline based programs).
HEART RAT E
PULSE GRIPS
TROUBLESHOOTING
& MAINTENANCE
Prior to wearing the wireless chest transmitter on your
chest, moisten the two rubber electrodes with water. Center
the chest strap just below the breast or pectoral muscles,
directly over your sternum, with the logo facing out. NOTE:
The chest strap must be tight and properly placed to receive
an accurate and consistent readout. If the chest strap is too
loose, or positioned improperly, you may receive an erratic
or inconsistent heart rate readout. WARNING! The heart
rate function is not a medical device. Various factors may
affect the accuracy of your heart rate reading. The heart rate
reading is intended only as an exercise aid.
BACKSIDE OF CHEST TRANSMITTER
APPLY MOISTURE HERE
23
LIMITED
WARRANTY
WIRELESS CHEST TRANSMITTER
CONDITIONING
GUIDELINES
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your
heart rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When
gripping the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure.
Keep a loose, cupping hold. You may experience an erratic readout if consistently holding the grip pulse
handlebars. Make sure to clean the pulse sensors to ensure proper contact can be maintained.
INTRODUCTION
GETTI N G S TA R T E D / S E L E C T I N G A P R O G R A M
IMPORTANT
PRECAUTIONS
1) Check to make sure nothing is on or will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing.
5) Insert the safety key into the safety keyhole in the console.
ASSEMBLY
6) You have two options to start your workout:
quick start up
Simply press the start key to begin working out. OR...
BEFORE
YOU BEGIN
SELECT A PROgram
Select a Program using the QUICK PROGRAM KEYS keys.
Once a program has been chosen, press enter.
SELECT A LEVEL
Select a program level using the arrow keys on the PROGRAMMING button.
Once a program level has been chosen, press enter.
TREADMILL
OPERATION
SELECT A TIME
Select a Time using the arrow key on the PROGRAMMING button or use the default time.
Once a time has been chosen, press Start.
finishing YOUR WORKOUT
CONDITIONING
GUIDELINES
When your workout is complete, you will hear a series of beeps. Your workout information will be displayed for
30 seconds and then reset.
CLEAR CURRENT SELECTION
To clear the current program selection or screen, hold the Stop button for 3 seconds.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
24
INTRODUCTION
PROGRAM I N F O R M AT I O N
MANUAL
MANUAL
PROGR
AM: MANUAL
INTERVALS
IMPORTANT
PRECAUTIONS
Allows ‘On TheINTERVALS
Fly’ manual speed and incline changes. Time-based goal.
MANUAL
ROLLING
ROLLING
INTERVALS
PROG R A M : I N T E R VA L S
WEIGHT LOSS
Walk or run a WEIGHT
seriesLOSS
of alternating speed levels. Time-based goal with 12 difficulty levels to choose from.
ROLLING
GOLF COURSE
GOLF COURSE
WEIGHT LOSS
INTERVALS Program Segments
Warm-Up
:30
:90
:30
Cool Down
1
CUSTOM
CUSTOM
Level 1 1
RACE
1
2
3
4
1.0
1.5
2.0
4.0
2.0
4.0
1.5
1.0
Level 2
1.0
1.5
2.0
4.5
2.0
4.5
1.5
1.0
CUSTOM
Level 3 2
CUSTOM
CUSTOM21
Level 4
1.3
1.9
2.5
5.0
2.5
5.0
1.9
1.3
1.3
1.9
2.5
5.5
2.5
5.5
1.9
1.3
Level 5
THR ZONE 1
Level
6 21
THR
ZONE
CUSTOM
1.5
2.3
3.0
6.0
3.0
6.0
2.3
1.5
1.5
2.3
3.0
6.5
3.0
6.5
2.3
1.5
1.8
2.6
3.5
7.0
3.5
7.0
2.6
1.8
THR
ZONE
Level
8 2
THR
THR ZONE
ZONE21
Level 9
Level 7
1.8
2.6
3.5
7.5
3.5
7.5
2.6
1.8
2.0
3.0
4.0
8.0
4.0
8.0
3.0
2.0
Level 10
VALLEY
VALLEY
LevelZONE
11 2
THR
2.0
3.0
4.0
8.5
4.0
8.5
3.0
2.0
2.3
3.5
4.5
9.0
4.5
9.0
3.0
2.0
Level 12
TOUR
TOUR
VALLEY
PEAK
PEAK
INTERVALS
INTERVALS
TOUR
MOUNTAIN
MOUNTAIN
CLIMB
PEAK
CLIMB
INTERVALS
2.3
3.5
4.5
9.5
4.5
9.5
3.0
2.0
BEFORE
YOU BEGIN
:90
TREADMILL
OPERATION
RACE
RACE
GOLF COURSE
ASSEMBLY
(peak segments last 30 seconds, valley segments last 90 seconds)
(warm-up and cool-down last 5:00 minutes each and are included in program times)
PROG R A M : M O U N TA I N C L I M B
1
2
3
4
5
6
7
8
9
10
COOL-DOWN
1
0.0
0.0
1.0
1.5
2.0
2.5
3.0
3.0
2.5
2.0
1.5
1.0
0.0
0.0
2
0.0
0.0
1.5
2.0
2.5
3.0
3.5
3.5
3.0
2.5
2.0
1.5
0.0
0.0
3
0.0
1.0
2.0
2.5
3.0
3.5
4.0
4.0
3.5
3.0
2.5
2.0
1.0
0.0
4
0.0
1.5
2.5
3.0
3.5
4.0
4.5
4.5
4.0
3.5
3.0
2.5
1.5
0.0
5
0.0
1.5
3.0
3.5
4.0
4.5
5.0
5.0
4.5
4.0
3.5
3.0
1.5
0.0
6
0.0
1.5
3.5
4.0
4.5
5.0
5.5
5.5
5.0
4.5
4.0
3.5
1.5
0.0
7
0.0
1.5
4.0
4.5
5.0
5.5
6.0
6.0
5.5
5.0
4.5
4.0
1.5
0.0
8
0.0
2.0
4.5
5.0
5.5
6.0
6.5
6.5
6.0
5.5
5.0
4.5
2.0
0.0
9
0.0
2.0
5.0
5.5
6.0
6.5
7.0
7.0
6.5
6.0
5.5
5.0
2.0
0.0
10
0.0
2.0
5.5
6.0
6.5
7.0
7.5
7.5
7.0
6.5
6.0
5.5
2.0
0.0
11
1.0
2.0
6.0
6.5
7.0
7.5
8.0
9.0
7.5
7.0
6.5
6.0
2.0
1.0
12
1.0
2.0
6.5
7.0
7.5
8.0
8.5
9.5
8.0
7.5
7.0
6.5
2.0
1.0
TROUBLESHOOTING
& MAINTENANCE
Incline
(warm-up and cool-down last 5:00 minutes each and are included in program times)
25
LIMITED
WARRANTY
Level
MOUNTAIN
CLIMB
WARM -UP CONDITIONING
GUIDELINES
Simulates climbing and descending a mountain by automatically varying incline. 12 difficulty levels to choose from.
MANUAL
INTRODUCTION
INTERVALS
ROLLING
PWEIGHT
R OLOSSG R A M : W E I G H T L O S S
weight loss Program Segments (all segments last 30 seconds)
RACE
WARM-UP
Level 1
ASSEMBLY
Level 2
Level 3
Level 5
BEFORE
YOU BEGIN
Level 6
Level 7
Level 8
TREADMILL
OPERATION
Level 9
Level 10
Level 11
Level 12
2
3
4
5
6
7
8
0.0
0.5
1.5
1.5
1.0
0.5
0.5
0.5
1.0
1.5
0.5
0.0
Speed
1.0
1.5
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
2.3
1.5
Elevation
0.0
0.5
1.5
1.5
1.0
0.5
1.0
0.5
1.0
1.5
0.5
0.0
CUSTOM 21.3
Speed
1.9
2.5
3.0
3.5
4.0
4.5
4.0
3.5
3.0
2.6
1.8
1.0
0.5
3.0
2.0
1.0
0.5
3.4
2.3
1.5
1.0
3.8
2.5
1.5
1.0
4.1
2.8
2.0
1.5
4.5
3.0
2.0
1.5
4.9
3.3
2.5
2.0
5.3
3.5
CUSTOM 1
Elevation
0.5
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
Speed
1.5
2.3
3.0
3.5
4.0
4.5
5.0
4.5
4.0
3.5
Elevation
0.5
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
Speed
1.8
2.6
3.5
4.0
4.5
5.0
5.5
5.0
4.5
4.0
THR ZONE 1.0
2
Elevation
Speed
Elevation
VALLEY
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
2.0
3.0
4.0
4.5
5.0
5.5
6.0
5.5
5.0
4.5
CONDITIONING
GUIDELINES
1.0
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
Speed
2.3
3.4
4.5
5.0
5.5
6.0
6.5
6.0
5.5
5.0
Elevation
1.5
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
Speed
2.5
3.8
5.0
5.5
6.0
6.5
7.5
6.5
6.0
5.5
PEAK
Elevation
1.5
INTERVALS
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
2.8
4.1
5.5
6.0
6.5
7.0
7.5
7.0
6.5
6.0
Elevation
MOUNTAIN2.0
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
3.0
4.5
6.0
6.5
7.0
7.5
8.0
7.5
7.0
6.5
Elevation
2.0
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
2.5
2.0
Speed
3.3
4.9
6.5
7.0
7.5
8.0
8.5
8.0
7.5
7.0
5.6
3.8
Elevation
2.5
3.0
4.0
4.0
4.0
3.5
3.5
3.5
4.0
4.5
3.0
2.5
Speed
4.0
5.0
7.0
7.5
8.0
8.5
8.0
7.5
7.0
6.5
5.0
4.0
Elevation
3.0
3.5
4.0
4.0
5.0
4.5
4.5
4.5
5.0
5.5
3.5
3.0
Speed
5.0
6.0
7.5
8.0
8.0
8.5
9.0
8.5
8.0
7.0
5.0
5.0
TOUR
Speed
CLIMB
Speed
(warm-up and cool-down last 5:00 minutes each and are included in program times)
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
26
COOL-DOWN
Elevation
THR ZONE 1
Level 4
1
SEGMENTS ARE REPEATED UNTIL SELECTED TIME IS REACHED
IMPORTANT
PRECAUTIONS
Challenges with various combinations of hills and valleys (incline & SPEED levels). Time-based goal with 12
GOLFtoCOURSE
difficulty levels
choose from.
INTRODUCTION
THR ZONE 2
VALLEY
TOUR
PEAK
INTERVALS R A M : P E A K I N T E R VA L S
PROG
IMPORTANT
PRECAUTIONS
MOUNTAIN
Challenges with
various combinations of hills and valleys (incline & SPEED levels). Time-based goal with 12
CLIMB
difficulty levels to choose from.
peak intervals Program Segments (Peak segments last 30 seconds, valley segments last 90 seconds)
:90
:30
:90
:30
COOL-DOWN
1
2
3
4
5
6
7
8
Level 1
Elevation
1.0
1.5
1.0
2.0
1.0
2.0
1.0
2.5
1.0
2.5
1.5
1.0
Speed
1.0
1.5
2.0
4.0
2.0
4.0
2.0
4.5
2.0
4.5
1.5
1.0
Level 2
Elevation
1.0
1.5
1.0
2.5
1.0
2.5
1.5
3.0
1.5
3.0
1.5
1.0
Speed
1.0
1.5
2.0
4.5
2.0
4.5
2.5
5.0
2.5
5.0
1.5
1.0
Elevation
1.0
1.5
1.5
3.0
1.5
3.0
1.5
3.5
1.5
3.0
1.5
1.0
Speed
1.3
1.9
2.5
5.0
2.5
5.0
2.5
5.5
2.5
5.5
1.9
1.3
Level 4
Elevation
1.0
1.5
1.5
3.5
1.5
3.0
2.0
4.0
2.0
4.0
1.5
1.0
Speed
1.3
1.9
2.5
5.5
2.5
5.5
3.0
6.0
3.0
6.0
1.9
1.3
Level 5
Elevation
1.5
2.0
2.0
4.0
2.0
4.0
2.0
4.5
2.0
4.5
2.0
1.5
Speed
1.5
2.3
3.0
6.0
3.0
6.0
3.0
6.5
3.0
6.5
2.3
1.5
Level 6
Elevation
1.5
2.0
2.0
4.5
2.0
4.5
2.0
5.0
2.0
5.0
2.0
1.5
Speed
1.5
2.3
3.0
6.5
3.0
6.5
3.5
7.0
3.5
7.0
2.3
1.5
Elevation
1.5
2.5
2.0
5.0
2.0
5.0
2.0
5.5
2.0
5.5
2.5
1.5
Speed
1.8
2.6
3.5
7.0
3.5
7.0
3.5
7.5
3.5
7.5
2.6
1.8
Level 8
Elevation
1.5
2.5
2.0
5.5
2.0
5.5
2.0
6.0
2.0
6.0
2.5
1.5
Speed
MANUALElevation
1.8
2.6
3.5
7.5
3.5
7.5
4.0
8.0
4.0
8.0
2.6
1.8
Level 9
2.0
3.0
2.5
6.0
2.5
6.0
2.5
6.5
2.5
6.5
3.0
2.0
Speed
INTERVALS
Elevation
2.0
3.0
4.0
8.0
4.0
8.0
4.0
8.5
4.0
8.5
3.0
2.0
Level 10
2.0
3.0
2.5
6.5
2.5
6.5
2.5
7.0
2.5
7.0
3.0
2.0
2.0
3.0
4.0
8.5
4.0
8.5
4.5
9.0
4.5
9.0
3.0
2.0
2.0
3.5
2.5
7.0
2.5
7.0
2.5
7.5
2.5
7.5
3.5
2.0
2.3
3.5
4.5
9.0
4.5
9.0
4.5
9.5
4.5
9.5
3.5
2.3
2.0
3.5
3.0
7.5
3.0
7.5
3.0
8.0
3.0
8.0
3.5
2.0
2.3
3.5
4.5
9.5
4.5
9.5
5.5
10.0
5.5
10.0
3.5
2.3
Level 3
Level 7
Speed
ROLLINGElevation
Speed
Level 12
WEIGHTElevation
LOSS
Speed
GOLF COURSE
(warm-up and cool-down last 5:00 minutes each and are included in program times)
RACE
PROG
RAM: PACER
TROUBLESHOOTING
& MAINTENANCE
CUSTOM 1
Trains you to run
at a steady 5 minute warm up and cool down “race pace.” Enter in the distance plus the
time limit and the program calculates a steady pace or simply press the start button for a pre-set speed.
CUSTOM 2
THR ZONE 1
THR ZONE 2
VALLEY
TOUR
PEAK
INTERVALS
27
LIMITED
WARRANTY
Level 11
ASSEMBLY
:30
BEFORE
YOU BEGIN
:90
TREADMILL
OPERATION
WARM-DOWN
:30
CONDITIONING
GUIDELINES
:90
INTRODUCTION
CUSTOM 1
CUSTOM 2
THR ZONE 1
PROGRAM:
THR ZONE 1 & 2
IMPORTANT
PRECAUTIONS
AutomaticallyTHRadjusts
ZONE 2 incline to maintain your Target Heart Rate. Perfect for simulating the intensity of your
favorite sport or everyday activity. Time-based goal.
1. OnceVALLEY
the THR ZONE program has been chosen, press enter.
TOUR a target heart rate using the arrow keys on the programming button and press enter.
2. Choose
Note:PEAK
Use the chart provided in this guide, to determine your target heart rate.
INTERVALS
ASSEMBLY
3. Choose a time using the ARROW key on the PROGRAMMING button or use the default time.
MOUNTAIN
CLIMB
4. Press Start to begin your program. At this time, your program has been successfully saved into
memory, and can be used for future workouts.
• To reset your program information and delete it from memory, press and hold
the enter key for 5 seconds (after you have selected the THR ZONE 1 or 2
program).
BEFORE
YOU BEGIN
In this program, the large LED dot matrix window displays your heart rate during exercise. The middle row
represents your target heart rate (THR) and the other rows equal +/-2 heart beats. If you are working out
beneath your THR, the LEDs below the middle row will illuminate. If you are over, the LEDs above the middle
row will illuminate. Your current heart rate is represented by the flashing column and the window will refresh
every 5 seconds.
TREADMILL
OPERATION
NOTE: If no heart rate is detected, the large LED window will display the incline profile.
CONDITIONING
GUIDELINES
After the warm-up period, the INCLINE level will increase gradually to get you to the entered TARGET HEART
RATE ZONE. Once you are at the TARGET HEART RATE ZONE (plus or minus 5 beats per minute) the INCLINE level
will remain until you rise above or drop below your TARGET HEART RATE ZONE at which time the incline would
adjust accordingly. If there is no heart rate detected, the incline will not change. If your heart rate is 25 beats
over your target zone the program will shut down. There is a cool down at the end of the program. At this time,
the program will gradually decrease the incline level to give you a smooth cool down.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
28
INTRODUCTION
RACE
CUSTOM 1
CUSTOM 2
PROGRAM:
CUSTOM 1 & 2
IMPORTANT
PRECAUTIONS
Lets you createTHRand
a perfect workout for you with specific speed, incline and time combination.
ZONEreuse
1
The ultimate in personal programming. Time-based goal.
THR ZONE 2
1. Once the CUSTOM 1 or 2 program has been chosen, press enter
2. Choose
VALLEY the desired time using the arrow keys on the programming button
and press enter.
TOUR
3. Choose
the desired speed for each segment, using the arrow keys on the
ASSEMBLY
programming
button and press enter. Note: You will need to press enter after
PEAK
INTERVALS
each
segment.
MOUNTAIN
4. Choose
the desired incline for each segment, using the arrow keys on the
CLIMB
programming button and press enter. Note: You will need to press enter after
each segment.
5. Press Start to begin your program. At this time, your program has been
BEFORE
YOU BEGIN
successfully saved into memory, and can be used for future workouts.
• To reset your program information and delete it from memory, press and
hold the enter key for 5 seconds (after you have selected the CUSTOM 1 or 2
program).
TREADMILL
OPERATION
• While using your saved program, you are able to adjust the speed or incline, but
any changes will not be saved.
CONDITIONING
GUIDELINES
PROGRAM I N F O R M AT I O N
Using etrak ™ Performance tracker
Introduction
eTRAK™ is an innovative new software integrated into your treadmill console, that will allow you to track your
fitness progress over time without the need for paper journals or logs. eTRAK™ allows you to easily compare
your current workout to your last, average or lifetime workout totals. With quick access to feedback like time
of workout or calories burned during previous workouts, you’ll be able to quickly and easily see the progress
you’ve made. Read further to learn about how eTRAK™ can help motivate you to enhance
your performance.
29
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
Research shows that those who journal their fitness routines or workouts, on average, achieve greater
success than those who do not. Because your new treadmill is equipped with Horizon’s exclusive eTRAK™
Performance Tracker, you’ve taken an important step towards achieving your fitness goals. Congratulations!
INTRODUCTION
DAT E & C L O C K S E T U P
Enter Setup Mode: Press and hold MANUAL and INTERVALS program buttons for 3 seconds.
Once in setup mode, use the PROGRAMING ARROW KEYS to scroll through settings.
Use the ENTER button to confirm settings.
Settings include: MONTH, DAY, YEAR, HOUR, MINUTE, and AM/PM.
Review Settings: You can review your settings at any time while in Setup Mode. Use the ENTER button to
scroll through settings.
6) Exit Setup Mode: To confirm the Date and Time, press and hold ENTER for 5 seconds.
7) To Reset: Simply reenter Setup Mode and adjust Date and Time to the correct setting.
IMPORTANT
PRECAUTIONS
1)
2)
3)
4)
5)
ASSEMBLY
etrak™ operation
SETUP: To activate eTRAK™ a user MUST be chosen before the program begins. To select a user, simply
press the User 1 or User 2 button. To deselect a user, press User button again. All accumulated data
specifically relates to the user that is chosen. Note: If no user is selected, no data will be tracked.
BEFORE
YOU BEGIN
RESET: Reset all recorded information for User 1 or User 2 by selecting the user and then holding down the
user button for 10 seconds. Note: This step is permanent and will delete ALL previously accumulated data
for the chosen user.
ACCUMULATED DATA: Once eTRAK™ is activated, you can scroll through your accumulated data in multiple
formats by pressing the eTRAK™ button. A workout is saved when: the program ends, the console is
paused and not resumed within five minutes, or the stop button is held to reset the console.
TREADMILL
OPERATION
1) CURRENT WORKOUT: The console automatically defaults to Current Workout, displaying your progress in real time.
CONDITIONING
GUIDELINES
2) AVERAGE WORKOUT: This option allows you to see your average accumulated data for the last 100 workouts. The following information will be shown in each display window:
INCLINE - Average incline level.
TIME - Average workout time.
CALORIES - Average calories burned.
PACE - Average pace of workout. (T6 Only)
DISTANCE - Average workout distance.
SPEED - Average speed of workout.
TROUBLESHOOTING
& MAINTENANCE
3) LAST WORKOUT: This option allows you to view your accumulated data from your last workout. The Current Workout becomes the Last Workout once a program has ended or the console has been reset. The
following information will be shown in each display window:
INCLINE- Average incline of last workout.
TIME - Total time of last workout.
CALORIES - Total calories burned during last workout.
PACE - Average pace of last workout. (T6 Only)
DISTANCE - Total distance of last workout.
SPEED - Average speed of last workout.
LIMITED
WARRANTY
30
INTRODUCTION
e trak operation
ASSEMBLY
IMPORTANT
PRECAUTIONS
4) WEEKLY TOTAL: View your accumulated data from the last Sunday to the present day. Note: This data is based on week to date NOT the previous seven days. For instance, if you have not used the machine since Sunday, the console will read zeros. The following information will be shown in each display window:
INCLINE- Average incline of weekly workout.
TIME - Total time of workout.
CALORIES - Average calories burned.
PACE - Average pace of of weekly workout. (T6 Only)
DISTANCE - Total distance of workout.
SPEED - Average speed of weekly workout.
Note: If the Date and Clock are not set, Weekly Total will default to the Total Workout data.
TREADMILL
OPERATION
BEFORE
YOU BEGIN
5) MONTHLY TOTAL: View your accumulated data from the 1st day of the month to the present day. Note: This data is based on month to date NOT the previous thirty days. For instance, if you have not used the machine since the 1st of the month, the console will read zeros. The following information will be shown in each display window:
INCLINE- Average incline of monthly workout.
TIME - Total time of monthly workout.
CALORIES - Average calories burned.
PACE - Average pace of monthly workout. (T6 Only)
DISTANCE - Total distance of workout.
SPEED - Average speed of monthly workout.
Note: If the Date and Clock are not set, Monthly Total will default to equal the Total Workout data.
31
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
6) LIFETIME TOTAL: This option allows you to view the the total accumulated data from your first workout to your last saved workout. The following information will be shown in each display window:
INCLINE- Average incline.
TIME - Total accumulated time. Note: If time is greater than 99:59, the time will no longer display minutes and will display hours only.
CALORIES - Average calories burned.
PACE - Average pace. (T6 Only)
DISTANCE - Total accumulated distance.
SPEED - Average speed.
INTRODUCTION
C O N D I T I O N I N G GUIDELINES
IMPORTANT
PRECAUTIONS
Always consult your physician before beginning an exercise program.
HOW OFTEN? (Frequency of Workouts)
ASSEMBLY
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
BEFORE
YOU BEGIN
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may
be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.
HOW HARD? (Intensity of Workouts)
TREADMILL
OPERATION
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a 5K run, you will
probably work out at a higher intensity than if your goal is general fitness. Regardless of your long term goals,
always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial!
There are two ways to measure your exercise intensity. The first is by monitoring your heart rate (using the grip
pulse handlebars or a wireless chest transmitter - may be sold separately), and the second is by evaluating your
perceived exertion level (this is simpler than it sounds!).
CONDITIONING
GUIDELINES
PERCEIVED EXERTION LEVEL
TROUBLESHOOTING
& MAINTENANCE
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
LIMITED
WARRANTY
32
INTRODUCTION
IMPORTANT
PRECAUTIONS
TARGET HE A R T R AT E Z O N E C H A R T
0%
12
0
0
AGE
14
6
14
3
T A 139 1
35
R
13
11
1
7
G
11
E
4
T
11
1
10
8
12
8
12
4
Z O 120
10
5
NE
10
2
9
9
20
25
30
35
40
45
50
BEFORE
YOU BEGIN
%
15
55
97
60
11
6
TREADMILL
OPERATION
60
%
93
65
CONDITIONING
GUIDELINES
75
example:
TROUBLESHOOTING
& MAINTENANCE
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Heart Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
Always consult your physician before beginning an exercise program.
33
LIMITED
WARRANTY
10
BEATS PER MINUTE
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
ASSEMBLY
What is Target Heart Rate Zone?
INTRODUCTION
TIPS
STRETCHING
IMPORTANT
PRECAUTIONS
STRETCH FIRST
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into
each of these stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to
bounce while doing these stretches.
ASSEMBLY
1. STANDING CALF MUSCLE STRETCH
BEFORE
YOU BEGIN
Stand near a wall with the toes of tour left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
TREADMILL
OPERATION
2. STANDING QUADRICEPS STRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
CONDITIONING
GUIDELINES
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
TROUBLESHOOTING
& MAINTENANCE
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
LIMITED
WARRANTY
34
INTRODUCTION
TIPS
THE IMPORTANCE OF WARM UP & COOL DOWN
IMPORTANT
PRECAUTIONS
WARM UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
COOL DOWN
BEFORE
YOU BEGIN
ACHIEVING YOUR FITNESS GOALS
An important step in developing a long term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
TREADMILL
OPERATION
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
CONDITIONING
GUIDELINES
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories or Time.
TROUBLESHOOTING
& MAINTENANCE
KEEPING AN EXERCISE DIARY
To make your personal exercise log book, photocopy the weekly and monthly log sheets, which are located
on the following pages, or you can print them off of your computer by going to:
www.horizonfitness.com/guides/weeklylog.pdf
www.horizonfitness.com/guides/monthlylog.pdf
As your fitness improves, you can look back and see how far you’ve come!
35
LIMITED
WARRANTY
TIPS
ASSEMBLY
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
INTRODUCTION
W E E K LY L O G S H E ETS
IMPORTANT
PRECAUTIONS
WEEK #
D AY
WEEKLY GOAL
DATE
DISTANCE
CALORIES
TIME
COMMENTS
S U N D AY
M O N D AY
T U E S D AY
W E D N E S D AY
T H U R S D AY
ASSEMBLY
F R I D AY
S AT U R D AY
W E E K LY T O TA L S :
BEFORE
YOU BEGIN
WEEK #
D AY
WEEKLY GOAL
DATE
DISTANCE
CALORIES
TIME
COMMENTS
S U N D AY
M O N D AY
T U E S D AY
TREADMILL
OPERATION
W E D N E S D AY
T H U R S D AY
F R I D AY
S AT U R D AY
W E E K LY T O TA L S :
CONDITIONING
GUIDELINES
WEEK #
D AY
WEEKLY GOAL
DATE
TROUBLESHOOTING
& MAINTENANCE
S U N D AY
M O N D AY
T U E S D AY
W E D N E S D AY
T H U R S D AY
F R I D AY
S AT U R D AY
LIMITED
WARRANTY
W E E K LY T O TA L S :
36
DISTANCE
CALORIES
TIME
COMMENTS
INTRODUCTION
W E E K LY L O G S H E E T S
DAY
WEEKLY GOAL
D ATE
DISTANCE
CALORIES
TIME
IMPORTANT
PRECAUTIONS
WEE K #
COMMENTS
SUND AY
MON D AY
TUES D AY
WED N E S D AY
ASSEMBLY
THUR S D AY
FRID AY
SATU R D AY
WEE K #
DAY
BEFORE
YOU BEGIN
WEE K LY T O TA L S :
WEEKLY GOAL
D ATE
DISTANCE
CALORIES
TIME
COMMENTS
SUND AY
MON D AY
TREADMILL
OPERATION
TUES D AY
WED N E S D AY
THUR S D AY
FRID AY
SATU R D AY
WEE K #
DAY
CONDITIONING
GUIDELINES
WEE K LY T O TA L S :
WEEKLY GOAL
D ATE
DISTANCE
CALORIES
TIME
COMMENTS
TROUBLESHOOTING
& MAINTENANCE
SUND AY
MON D AY
TUES D AY
WED N E S D AY
THUR S D AY
FRID AY
WEE K LY T O TA L S :
37
LIMITED
WARRANTY
SATU R D AY
INTRODUCTION
M O N T H LY L O G S H EETS
IMPORTANT
PRECAUTIONS
MONTH
WEEK #
ASSEMBLY
D I S TANCE
MONTHLY GOAL
CALORIES
TIME
D I S TANCE
MONTHLY GOAL
CALORIES
TIME
D I S TANCE
MONTHLY GOAL
CALORIES
TIME
M O N T H LY T O TA L S :
BEFORE
YOU BEGIN
MONTH
WEEK #
TREADMILL
OPERATION
M O N T H LY T O TA L S :
CONDITIONING
GUIDELINES
MONTH
WEEK #
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
M O N T H LY T O TA L S :
38
INTRODUCTION
TR O U B L E S H O O T I N G
IMPORTANT
PRECAUTIONS
COMMON PRODUCT QUESTIONS
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new
treadmills. This noise will diminish over time, although may not totally go away. Over time, the belt will
stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I PURCHASED LOUDER THAN THE ONE AT THE STORE?
ASSEMBLY
All fitness products seem quieter in a large store showroom because there is generally more background noise
than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay
floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness product is
placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder than a normal conversational tone of voice, it is
considered normal noise.
BEFORE
YOU BEGIN
TROUBLESHOOTING - TREADMILL
Your treadmill is designed to be reliable and easy to use. However, if you experience a problem, please reference the
troubleshooting guide listed below.
PROBLEM: The console does not light up and/or the belt does not move.
SOLUTION: Verify the following:
39
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
Does the red light on the ON/OFF switch light up?
If yes:
• Double check that all connections are secure, especially the console cable. Unplug and reconnect the console
cable to verify.
• Make sure the console cable is not pinched or damaged in any way.
• Turn the power off, unplug the power cable and wait 60 seconds. Remove motor cover. Wait until all red LED
lights have gone off on the motor control board before proceeding. Next, verify that none of the wires connected
to the lower board are loose or disconnected.
If no:
• Verify that the outlet the machine is plugged into is functional. Double check that the breaker has not tripped,
it is on a dedicated 20-amp circuit, it is not on a GFCI equipped outlet, and it is not plugged into a power
strip/surge protector or extension cord.
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position.
INTRODUCTION
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify the following:
• Make sure the treadmill is plugged into a dedicated 20-amp circuit.
• Verify that you do not have the machine on an extension cord or surge protector.
• Confirm that the machine is not plugged into a GFCI-equipped outlet or on a circuit that has a GFCI‑equipped outlet on it.
IMPORTANT
PRECAUTIONS
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify the following:
• Make sure the treadmill is on a level surface.
• Verify that the belt is properly tightened and centered (Refer to the Adjustment section for detailed directions).
PROBLEM: Operating speed appears inaccurate.
SOLUTION: Auto-calibrate the treadmill:
ASSEMBLY
• Power on the treadmill and have the safety key in position on the
console. Press and hold the elevation “+” and speed “-” buttons for
approximately 5 seconds to enter the Engineering Mode. The console
will beep and “ENG0” appears in the display.
• Press the Speed “+” or “-” button until “ENG2” appears in the display.
• Press, “ENTER” to select. Press, “START” to begin. The treadmill
running belt will begin to move automatically and the auto-calibration
sequence will properly set and store the speed values.
• Upon successful calibration, the treadmill will beep several times. The
console will automatically exit Engineering Mode and return to the
start-up screen.
WARNING
DO NOT stand on running belt while
BEFORE
YOU BEGIN
calibrating – stand on the guide
rails. Treadmill will fluctuate between
low and high speeds for several
minutes until calibration is complete.
TROUBLESHOOTING - HEART RATE
Check your exercise environment for sources of interference such as fluorescent lights, computers, underground fencing, home
security systems or appliances containing large motors. These items may cause erratic heart rate readouts.
TREADMILL
OPERATION
You may experience an erratic readout under the following conditions:
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the heart rate handlebars.
• Constant movement and vibration due to constantly holding the heart rate handlebars while exercising. If you are receiving
erratic heart rate readouts, try to only hold the grips long enough to monitor your heart rate.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
CONDITIONING
GUIDELINES
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
PLEASE CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
TROUBLESHOOTING
& MAINTENANCE
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
LIMITED
WARRANTY
In order for Customer Tech Support to service your treadmill they may need to ask detailed questions about the symptoms that are
occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front or the back? What kind of noise is it (thumping, grinding, squeaking,
chirping etc.)?
• Has the machine been lubricated and maintained per the maintenance schedule?
40
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service necessary
to get you and your Horizon Fitness treadmill running again!
INTRODUCTION
MA I N T E N A N C E
IMPORTANT
PRECAUTIONS
Cleanliness of your treadmill and its operation environment will keep maintenance problems and service calls to a
minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.
ASSEMBLY
AFTER EACH USE (DAILY)
Clean and inspect, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use solvents, as they
can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other
components on the treadmill by being misaligned.
BEFORE
YOU BEGIN
EVERY WEEK
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.
• Return the treadmill to its previous position.
RUNNING BELT
TROUBLESHOOTING
& MAINTENANCE
• Turn off the treadmill with the on/off switch, then unplug the
power cord at the wall outlet.
• Loosen both the rear roller bolts. (For best results, place two removable
marks on both sides of the frame and note roller position). Once
the belt is loosened, take the bottle of lubricant and apply it to the
entire top surface of the running deck. Tighten both rear roller bolts
(matching up the marks for proper position) to original position. After
you have applied lubricant, plug in the power cord, insert the safety
key, start the treadmill and walk on the belt for two minutes to spread
the lubricant.
• Once lubrication is complete, reset the console by pressing and holding
‘STOP’ and Speed ‘+’ buttons for 5 seconds.
CONDITIONING
GUIDELINES
LUBRICATION
RUNNING DECK
Please contact Horizon Fitness with questions about applying lubricant to your treadmill.
41
LIMITED
WARRANTY
EVERY 6 MONTHS OR 150 MILES
It is necessary to lubricate your treadmill running deck every six months
or 150 miles to maintain optimal performance of your treadmill. Once the
treadmill reaches 150 miles, the console will prompt you to lubricate the
treadmill. Only use lubricant provided by Horizon Fitness!
TREADMILL
OPERATION
EVERY MONTH - IMPORTANT!
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Inspect all assembly bolts of the machine for proper tightness.
• Turn off the treadmill and wait 60 seconds.
• Wait until ALL LED lights turn off.
• Remove screws holding motor cover to the frame. Remove the lower mast bolts in order to slide the motor cover
upwards. While sliding the motor cover up the masts, be careful not to scratch the paint. Prop up the motor cover
to continue.
• Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated. Failure to
do so may result in premature failure of key electrical components.
• Vacuum and wipe down the belt with a damp cloth. Vacuum any black/white particles that may accumulate around
the unit. These particles may accumulate from normal treadmill use.
INTRODUCTION
L I M I T E D H O M E-USE WARRANTY
IMPORTANT
PRECAUTIONS
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in
workmanship and materials for the lifetime of the original
owner. (The frame is defined as the welded metal base of the
unit and does not include any parts that can be removed.).
WEIGHT CAPACITY
T4 = 350 LBS
T6 = 400 LBS
ASSEMBLY
DRIVE MOTOR/ELEVATION • 30 YEARS
Horizon Fitness warrants the drive/elevation motors against
defects in workmanship and materials for a period of thirty
years from the date of purchase, so long as the device
remains in the possession of the original owner.
BEFORE
YOU BEGIN
ELECTRONICS & PARTS • 2 YEARS / 5 YEARS *
Horizon Fitness warrants the electronic components, finish
and all original parts for a period of two years from the
date of original purchase, so long as the device remains in
the possession of the original owner.
* A free extended parts and electronics warranty is
available. See registration card for details.
TREADMILL
OPERATION
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost for the repair
of the device for a period of one year from the date of the
original purchase, so long as the device remains in the
possession of the original owner.
EXCLUSIONS AND LIMITATIONS
CONDITIONING
GUIDELINES
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or
defective part and is the sole remedy of the warranty.
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or
installation of parts or accessories not originally intended or
compatible with the equipment as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of
paint or plastic, neglect, theft, vandalism, fire, flood, wind, lightning,
freezing, or other natural disasters of any kind, power reduction,
fluctuation or failure from whatever cause, unusual atmospheric
conditions, collision, introduction of foreign objects into the covered
unit, or modifications that are unauthorized or not recommended by
Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not
responsible or liable for indirect, special or consequential damages,
economic loss, loss of property, or profits, loss of enjoyment or use,
or other consequential damages of whatsoever nature in connection
with the purchase, use, repair or maintenance of the equipment.
• Equipment used for commercial purposes or any use other than a
single family or Household, unless endorsed by Horizon Fitness for
coverage.
• Equipment owned or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement
units or labor or other costs associated with removal or replacement
of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Horizon
Fitness is not responsible or liable for any damage, loss or liability
arising from any personal injury incurred during the course of, or as
a result of any repair or attempted repair of your fitness equipment
by other than an authorized service technician. All repairs attempted
by you on your fitness equipment are undertaken AT YOUR OWN RISK
and Horizon Fitness shall have no liability for any injury to the person
or property arising from such repairs.
TROUBLESHOOTING
& MAINTENANCE
SERVICE/RETURNS
• In-home service is available within 150 miles of the nearest
authorized repair center (Mileage beyond 150 miles from an
authorized service center is the responsibility of the consumer).
• All returns must be pre-authorized by Horizon Fitness.
• Horizon Fitness’ obligation under this warranty is limited to
replacing or repairing, at Horizon Fitness’ option, the same or
comparable model at one of its authorized service centers.
• A Horizon Fitness authorized service center must receive all
equipment for which a warranty claim is made. This equipment must
be received with all freight and other transportation charges prepaid,
accompanied by sufficient proof of purchase.
• Replacement units, parts and electronic components reconditioned
to As-new Condition by Horizon Fitness or its vendors may sometimes
be supplied as warranty replacement and constitute fulfillment of
warranty terms.
• This warranty gives you specific legal rights, and your rights may
vary from state to state.
LIMITED
WARRANTY
42
C U S T O M ER TECH SUPPORT
For fast and friendly service, please contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1 - 8 0 0 - 2 4 4 - 4 1 9 2
Email: [email protected]
Website: www.horizonfitness.com
Every employee at Horizon Fitness takes pride in providing you with a high quality product.
We want to know if you have a problem and we want to have an opportunity to correct it for you.
Note: Please read the troubleshooting section before contacting Customer Tech Support.
To receive additional product information, visit us at www.horizonfitness.com
1620 Landmark Drive,
Cottage Grove WI, 53527
Tel: 1.800.244.4192
Fax: 608.839.1260
T4 T6. Rev. 1.9 | © 2006 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement