Horizon Fitness T40 Folding, T20, T40, T30 User guide

Horizon Fitness T40 Folding, T20, T40, T30 User guide
7/5/2003
2:55 PM
Page 1
Designed for life.TM
HORIZON FITNESS
800 BURTON BOULEVARD
DEFOREST, WISCONSIN 53532
phone 1.888.993.3199 fax 1.608.842.1660
www.horizonfitness.com
Rev. 1.0
TREADMILL
horizon T20, 30, 40 owner’s guidev1.0.qxd
HORIZON T20
HORIZON T30
HORIZON T40
Owner’s Guide
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 3
LIMITED HOME USE WARRANTY
T30 & T40
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the
original owner.
DRIVE MOTOR • 25 YEARS
Horizon Fitness warrants the drive motor against defects in workmanship and materials for a period of
ten years from the date of purchase, so long as the device remains in the possession of the original owner.
ELEVATION MOTOR • 25 YEARS
Horizon Fitness warrants the elevation motor against defects in workmanship and materials for a period
of ten years from the date of purchase, so long as the device remains in the possession of the original
owner.
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic components, finish and all original parts for a period of one year
from the date of original purchase, so long as the device remains in the possession of the original owner.
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost for the repair of the device for a period of one year from the
date of the original purchase, so long as the device remains in the possession of the original owner.
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective frame, motor, electronic component, or defective part and
is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the
Treadmill as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion,
discoloration of paint or plastic, or neglect. Horizon Fitness shall not be responsible for incidental or consequential damages. All returns must be pre-authorized by Horizon Fitness. Horizon Fitness’ obligation
under this warranty is limited to replacing or repairing, at Horizon Fitness’ option, the product at one of
its authorized service centers. An Horizon Fitness authorized service center must receive all products for
which a warranty claim is made. These products must be received with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. Parts and electronic components
reconditioned to As New Condition by Horizon Fitness or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms. This warranty gives you specific
legal rights, and your rights may vary from state to state.
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
FOLDING & MOVING
LEVELING, POWER & EMERGENCY STOP
KNOW YOUR TREADMILL (Horizon T20)
3
7
8
9
GETTING STARTED (Horizon T20)
PROGRAMMING/DISPLAY (Horizon T20)
KNOW YOUR TREADMILL
(Horizon T30, T40)
GETTING STARTED (Horizon T30, T40)
DISPLAY (Horizon T30, T40)
PROGRAM PROFILES
USING YOUR RACE PROGRAM
USING YOUR PULSE ZoneTM PROGRAM
USING YOUR ADVENTURE PROGRAM
TROUBLESHOOTING
COMMON QUESTIONS
MAINTENANCE PROCEDURES
EXERCISE GUIDELINES
10
11
13
14
18
19
24
25
27
28
30
32
33
DEVELOPING A FITNESS PROGRAM
& IMPORTANCE OF WARM UP/ COOL DOWN
FITNESS GOALS
WEEKLY LOG SHEETS
MONTHLY LOG SHEETS
LIMITED HOME USE WARRANTY
(Horizon T20)
LIMITED HOME USE WARRANTY
(Horizon T30, T40)
!
CAUTION
34
35
36
37
38
39
CAUTION
Read all precautions and instructions in this manual before using this equipment.
Save this manual for future reference.
39 HORIZON SERIES
2 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 4
LIMITED HOME USE WARRANTY
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this Treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill
T20
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the
original owner.
WARNING!
Connect this exercise product to a properly grounded outlet only.
See grounding instructions.
DRIVE MOTOR • 25 YEARS
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides
a path of least resistance for electrical current to reduce the risk of electrical shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with local codes and ordinances.
DANGER!
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Horizon Fitness warrants the drive motor against defects in workmanship and materials for a period of
ten years from the date of purchase, so long as the device remains in the possession of the original owner.
ELEVATION MOTOR • 25 YEARS
Horizon Fitness warrants the elevation motor against defects in workmanship and materials for a period
of ten years from the date of purchase, so long as the device remains in the possession of the original
owner.
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic components, finish and all original parts for a period of one year
from the date of original purchase, so long as the device remains in the possession of the original owner.
LABOR • 90 DAYS
Horizon Fitness shall cover the labor cost for the repair of the device for a period of ninety days from the
date of the original purchase, so long as the device remains in the possession of the original owner.
EXCLUSIONS AND LIMITATIONS
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated below. A temporary adapter such as the one illustrated below may be used to connect this
plug to a 2-pole receptacle as shown, if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected
to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is
used, it must be held in place by a metal screw.
3-POLE
GROUNDED
OUTLET
2-POLE
OUTLET IN
GROUNDED BOX
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective frame, motor, electronic component, or defective part and
is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the
Treadmill as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion,
discoloration of paint or plastic, or neglect. Horizon Fitness shall not be responsible for incidental or consequential damages. All returns must be pre-authorized by Horizon Fitness. Horizon Fitness’ obligation
under this warranty is limited to replacing or repairing, at Horizon Fitness’ option, the product at one of
its authorized service centers. An Horizon Fitness authorized service center must receive all products for
which a warranty claim is made. These products must be received with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. Parts and electronic components
reconditioned to As New Condition by Horizon Fitness or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms. This warranty gives you specific legal
rights, and your rights may vary from state to state.
ADAPTER
GROUNDED TREADMILL
POWER CORD
METAL
GROUNDING
SCREW
3 HORIZON SERIES
38 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 5
MONTHLY LOG SHEET
WARNING
WARNING!
To reduce the risk of burns, fire, electrical shock or injury to persons:
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop
exercising immediately and consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Keep power cord away from heated surfaces.
• Keep children off of treadmill at all times.
• Do not use treadmill outdoors.
• Unplug treadmill before moving it.
• Do not remove the treadmill motor covers or roller covers. Service should be
performed only by an authorized Horizon Fitness service provider.
• Treadmill should be plugged into a dedicated 20amp circuit.
• At no time should more than one person be on treadmill while in operation.
CHILDREN
• Keep children off your Treadmill at all times.
• When the Treadmill is in use, young children and pets should be kept at least
10 feet away.
CLEANING
• Clean with soap and slightly damp cloth only; never use solvents.
OTHER SAFETY TIPS FOR YOUR HORIZON FITNESS TREADMILL
!
CAUTION
CAUTION!
If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.
• Do not wear clothing that might catch on any part of the Treadmill.
• Read this Owner’s Guide before operating this Treadmill.
OPERATION
To reduce the risk of damaging important components on your treadmill, it is strongly recommended
that your treadmill is plugged into a dedicated 20amp outlet, without the use of an additional
extension cord.
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill
has been exposed to colder temperatures or high moisture climates, it is strongly recommended that
the treadmill is warmed up to room temperature before first time use. Failure to do so may cause
premature electronic failure.
37 HORIZON SERIES
4 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 6
CONGRATULATIONS! on choosing a Horizon Series treadmill.
You’ve taken an important step in developing and sustaining an exercise program! Your treadmill is
a tremendously effective tool for achieving your personal fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
WEEKLY LOG SHEET
Here are just a few of the health benefits of aerobic exercise:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
• Reduced Stress
• Help In Countering Anxiety
and Depression
• An Improved Self Image
The key to reaping these benefits is to develop the exercise habit. Your new treadmill will help you
eliminate the obstacles that prevent you from getting in your exercise time. Inclement weather and
darkness won't interfere with your workout when you use your treadmill in the comfort of your home.
This manual provides you with basic information for using and enjoying your new machine. A more
complete knowledge of your new treadmill will assist you in realizing your goal of a healthy lifestyle.
!
CAUTION
CAUTION: BEFORE BEGINNING ANY EXERCISE PROGRAM, ALWAYS CONSULT YOUR PHYSICIAN. IF YOU EXPERIENCE CHEST PAINS, NAUSEA, DIZZINESS OR SHORTNESS OF BREATH,
STOP EXERCISING AND CONSULT YOUR PHYSICIAN BEFORE CONTINUING.
IMPORTANT: PLEASE READ BEFORE USE!
ASSEMBLY
CAUTION! There are several areas during the assembly process of a treadmill that special attention
must be paid. It is very important to follow the assembly instructions correctly and to make sure all
parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could
have frame parts that are not tightened and will seem loose and may cause irritating noises. There
should be no side-to-side play in the console masts or any forward and back play in the console
assembly or handlebars. If there is any play in these areas, the treadmill has not been properly
assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.
5 HORIZON SERIES
36 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 7
ACHIEVING YOUR FITNESS GOALS
Before proceeding, find your treadmill’s serial number and model name located to the left of
the on/off power switch and power cord and enter it in the space provided below:
SERIAL NUMBER AND MODEL NAME LOCATION:
An important step in developing a long term fitness program is to determine your goals. Is your primary goal for exercising on your treadmill to lose weight? Improve muscle? Burn Stress? Prepare for
the spring racing schedule? Knowing what your goals are will help you develop a more successful
exercise program. Below are some common exercise goals:
•
•
•
•
•
Weight Loss
Improve Body Shape and Tone
Increased Energy Level
Improved Sports Performance
Improved Cardiovascular Endurance
•
•
•
•
Weight Maintenance
Strengthen Leg Muscles
Improved Sleep Patterns
Stress Reduction
If possible try to define your personal goals in precise, measurable terms, and then put your goals
in writing. The more specific you can be, the easier it will be to track your progress. If your goals are
long term, divide them up into monthly and weekly segments. Longer term goals can lose some of the
immediate motivation benefits. Short term goals are easier to achieve. Your treadmill console provides you with several readouts that can be used to record your progress. You can track Distance,
Calories or Time. Time is the most important and useful of test functions.
ENTER YOUR SERIAL NUMBER IN BOX BELOW:
KEEPING AN EXERCISE DAIRY
Photocopy the weekly and monthly log sheets on the following pages to make your personal exercise log book. As time goes by you’ll be able to look back with pride at the work you’ve done. As
your fitness improves, you can look back and see how far you’ve come.
Refer to this number when calling for service, and also enter this serial number on your
Warranty Card and in your own records. Be sure to read the Safety Instructions and complete
Owner’s Guide before using your new treadmill.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to Horizon Fitness within thirty days of purchase or registered on line at www.horizonfitness.com, before a warranty claim can be processed. Please keep receipt
with owner’s guide as it may be required for a warranty claim. Make sure to send in warranty registration card to validate your warranty.
35 HORIZON SERIES
6 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 8
FOLDING
Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill deck to the upright
position until the foot lock latch engages and securely locks the deck into position. Make sure the deck
is securely latched before letting go. To unfold, firmly grasp the back end of the treadmill. Gently
press down on the foot lock latch with your foot until the lock latch disengages. Carefully lower the
deck to the ground. NOTE: on the T20 model the foot lock latch might be on the right hand side.
DEVELOPING A FITNESS PROGRAM
TIPS
STRETCH FIRST
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury.
Ease into each of these stretches with a slow gentle motion. Do not stretch to the point of pain.
Make sure not to bounce while doing these stretches.
WALL PUSH
FOOT LOCK-LATCH
Stand near a wall with the toes of one foot about 18" from the wall, and the other foot about 12"
behind the other foot. Lean forward, pushing against the wall with your palms. Keep your heels flat
and hold this position for a count of 15 seconds. Make sure that you do not bounce while stretching.
Alternate positions of your feet and repeat for a total of 8 repetitions.
STANDING QUADRICEPS STRETCH
MOVING
Your treadmill has a pair of transport wheels built into the base frame. To move, make sure the treadmill is folded and securely latched. Then firmly grasp the handlebars, tilt the treadmill back and roll.
CAUTION! Our Treadmills are heavy, use care and additional help if necessary when moving. Do not
attempt to move or transport treadmill unless it is in upright, folded position with the lock latch
secured. Failure to follow these instructions could result in injury.
Using a wall to provide balance, grasp your left ankle with your left hand and hold your foot against
the back of your thigh for a count of 15 seconds. Repeat with your right ankle and hand, and continue alternating for a total of 8 repetitions.
SEATED TOE TOUCH
Sit on the floor with your legs together and straight out in front of you. Do not lock your knees. Extend
your fingers towards your toes and hold for a count of 15 seconds. Make sure that you do not bounce
while stretching. Sit upright again. Repeat for a total of 8 repetitions.
THE IMPORTANCE OF WARM
UP AND COOL DOWN
WARM UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your Horizon
Fitness product at a slow pace.
COOL DOWN
Never stop exercising suddenly! A cool-down period allows your heart to readjust to the decreased
demand. Make sure that your cool down period consists of a very slow pace to allow your heart rate
to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
7 HORIZON SERIES
34 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 9
EXERCISE GUIDELINES
Always consult your physician before beginning an exercise program.
HOW OFTEN?
The American Heart Association recommends that you exercise at least 3 to 4 days per week to
maintain cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve
your goal faster with more frequent exercise. Whether it’s 3 days or 6 days, remember that your
ultimate goal should be to make exercise a lifetime habit. Many people are successful staying with
a fitness program if they set aside a specific time of day to exercise. It doesn’t matter whether it’s
in the morning before your shower, during lunch hour or while watching the evening news. What’s
more important is that it’s a time that allows you to keep a schedule, and a time when you won’t be
interrupted. If you are to be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the
next month!
HOW LONG?
LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill where you intend
to use it, raise or lower the adjustable levelers located on the treadmill base frame. Once you have
leveled the treadmill, lock the levelers in place by tightening the nuts against the frame. To assure
the treadmill is level, a carpenter's level is recommended. NOTE: For the Horizon T20 leveling is not
needed.
TURN POWER ON
Make sure that your treadmill is properly connected to a power outlet. The on/off switch is located next
to the power cord. Flip this switch to the 'on' position, so that the switch is lit. You will hear a beep and
the console will light up.
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 32
minutes per session. But start slowly and gradually increase your exercise times. If you’ve been
sedentary during the past year, it may be a good idea to keep your exercise times to as little as
five minutes initially. Your body will need time to adjust to the new activity. If your goal is weight loss,
a longer exercise session at lower intensities has been found to be most effective. A workout time of
48 minutes or more is recommended for best weight loss results.
HOW HARD?
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a
5K run, you will probably work out at a higher intensity than if your goal is general fitness.
Regardless of your long term goals, always begin an exercise program at low intensity. Aerobic
exercise does not have to be painful to be beneficial! There are two ways to measure your exercise
intensity. The first is by monitoring your heart rate, and the second is by evaluating your perceived
exertion level (this is simpler than it sounds!).
SAFETY KEY
Your treadmill will not start unless the safety key is placed on the safety key holder. Attach the clip
end securely to your clothing. This safety key is designed to cut the power to the treadmill if you
should fall. NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT COME OFF YOUR CLOTHING.
PERCEIVED EXERTION LEVEL
The second and simpler way to gauge your exercise intensity is to evaluate your perceived exertion
level. While exercising if you are too winded to maintain a conversation without gasping, you are
working out too hard. A good rule of thumb is to work to the point of exhilaration, not exhaustion.
If you cannot catch your breath, it’s time to slow down. Always be aware of other warning signs of
overexertion.
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt. Place your feet on the side
rails before starting the treadmill. Start walking on the belt only after the belt has begun to move.
Never start the treadmill at a fast running speed and attempt to jump on!
33 HORIZON SERIES
8 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 10
KNOW YOUR TREADMILL
MAINTENANCE PROCEDURES
TIPS
WATER BOTTLE
HOLDER
CONSOLE
GRIP PULSE HANDLEBARS
Cleanliness of your treadmill and its operating environment will keep maintenance problems and
service calls to a minimum. For this reason, Horizon Fitness recommends that the following preventive
maintenance schedule be followed.
AFTER EACH USE
Turn off the treadmill with the on/off switch, and unplug the power cord from the wall outlet.
TOUCH PAD
WARNING!
UPRIGHT
SUPPORT
To remove power from the treadmill, the power cord must be disconnected from the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use
solvents, as they can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become
pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other components on the treadmill by being misaligned.
MOTOR COVER
SIDE RAIL
ROLLER
END CAP
TRANSPORT WHEEL
EVERY WEEK
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
treadmill.
• Return the treadmill to its previous position.
RUNNING BELT
EVERY MONTH
• Inspect all assembly bolts of the machine for proper tightness.
EVERY YEAR
• It may be necessary to rewax your treadmill running deck and belt once a year to maintain optimal performance of your treadmill. Please contact Horizon Fitness with questions about applying wax
to your treadmill.
Warning! Only use paraffin wax provided by Horizon Fitness!
• Lubricate the air shocks with teflon based spray.
9 HORIZON T20
32 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 11
GETTING STARTED
TENSIONING THE BELT
If you can feel a slipping sensation when running on the treadmill, the running belt must be tightened.
In most cases, the belt has stretched from use, causing the belt to slip. This is a normal and common
adjustment. To eliminate this slipping, tension both the rear roller bolts with the appropriate size allen
wrench, turning it 1/4 TURN to the right as shown. Try the treadmill again to check for slipping.
Repeat if necessary, but NEVER TURN the roller bolts more than 1/4 turn at a time. the belt tension
is set properly when the running belt is 1/4 of
an inch from the deck.
QUICK START UP
Simply press the Start button to begin exercising.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied Allen wrench to turn the right tension
bolt clockwise 1/4 turn at a time until the belt remains centered during use.
PAUSE
If the running belt is too far to the left side, turn the left tension bolt clockwise 1/4 turn at a time until
the belt remains centered during use.
RESET
Press the Stop button to pause your workout.
Press and hold the Stop button to reset the treadmill.
IF THE BELT IS TOO FAR TO THE LEFT
SIDE:
• Turn the left roller bolt 1/4 turn clockwise
(tighten).
IF THE BELT IS TOO FAR TO THE
RIGHT SIDE:
• Turn the right roller bolt 1/4 turn clockwise (tighten).
31 HORIZON SERIES
10 HORIZON T20
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 12
PROGRAMMING
COMMON PRODUCT QUESTIONS
CHOOSING THE TIME
Press SELECT and use the + or - buttons to set Time. Once the desired Time is selected, press the
START button. Select your desired speed using the + or - (speed) buttons.
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new treadmills. This noise will diminish over time, although may not totally go away. Over time, the
belt will stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I HAD DELIVERED LOUDER THAN THE ONE AT THE
STORE?
All fitness products seem quieter in a large store showroom because there is generally more background noise than in your home. Also, there will be less reverberation on a carpeted concrete floor
than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through
the floor. If a fitness product is placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder that a normal conversational tone of voice,
it is considered normal noise. If your treadmill is louder than this, you may want to call the Horizon
Fitness Customer Service Center @ 1.888.993.3199. Sometimes an initial diagnosis can be made
over the phone.
FINISHING A WORKOUT
When your workout is finished, the treadmill console will beep
twice and ‘END’ will be displayed in the Time window. Your
workout information will stay displayed on the console for 15
seconds before it will reset.
MAINTENANCE
DISPLAY
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
SELECT
We use sealed bearings throughout our treadmill so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the treadmill after each use.
Used to view alternate information such as
Speed, Pulse, Laps, Elevation, and Calories during your workout. Note: The console will automatically default back to show Time/Distance.
HOW DO I CLEAN MY TREADMILL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
TIME
Shown as Minutes:Seconds. View the time remaining
or the time elapsed in your workout.
11 HORIZON T20
30 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 13
• Constant movement and vibration due to constantly holding
the heart rate handlebars while exercising. If you are receiving
erratic heart rate readouts, try to only hold the grips long
enough to monitor your heart rate.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms
by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
DISPLAY
SPEED
Indicates how fast your walking or running surface is
moving.
PROBLEM: There is no heart rate reading.
SOLUTION: If you are using the chest strap, there may be a poor connection between the electrodes and the skin. Remoisten the electrodes with water.
The chest strap may not be positioned properly. Reposition the chest strap. It may
be necessary to experiment with the fit and position of the chest strap.
SOLUTION: Verify that the distance between the chest strap and the console is not beyond the
recommended range of 36 inches.
SOLUTION: The battery in the chest strap may be dead. Take the chest strap to a jewelry store
or return to Horizon Fitness for a battery replacement.
ELEVATION
Indicates the incline of your walking or running surface.
SOLUTION:
DISTANCE
Indicates the miles traveled during your workout.
PROBLEM: Erratic or inconsistent readout.
SOLUTION: This is often caused by dry electrodes or a loose chest strap. Moisture on the rubber electrodes is required for proper operation. Try a more generous coating of water on the electrodes and tightening the chest strap.
PULSE/LAPS
Indicates the number of times you have traveled around
the lap profile window. One lap equals ¼ of a mile.
Note: Pulse will be displayed if the heart rate handlebars are being used. The pulse reading is measured in
beats per minute.
If the above troubleshooting section does not remedy the
problem, discontinue use and turn the power off.
DO NOT RETURN TO THE STORE, PLEASE CONTACT THE HORIZON FITNESS
CUSTOMER ASSISTANCE CENTER;
TOLL FREE @ 1-888-993-3199.
29 HORIZON SERIES
CALORIES
Indicates the total number of calories burned during your
workout.
12 HORIZON T20
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 14
KNOW YOUR TREADMILL
TROUBLESHOOTING YOUR TREADMILL
Horizon Fitness treadmills are designed to be reliable and easy to use. However, if
you experience a problem, please reference the troubleshooting guide listed below.
PROBLEM: The console does not light up.
SOLUTION: Verify that the power cord is plugged in properly to the outlet, and that the tread-
CONSOLE
WATER BOTTLE
HOLDER
mill switch is turned on.
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify that the treadmill is plugged into a dedicated 20amp circuit.
NOTE: no extension cord.
GRIP PULSE
HANDLEBARS
PROBLEM: The treadmill shuts off when elevating
SOLUTION: Verify that there is enough slack in the power cord to reach to the wall outlet during
TOUCH PAD
UPRIGHT
SUPPORT
elevation.
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify that the treadmill is on a level surface. Verify that the belt is properly tight-
MOTOR COVER
ened (refer to Centering The Belt.)
PROBLEM: The treadmill makes a clicking noise towards the front of the machine while walking or
SIDE RAIL
ROLLER
END CAP
running on it.
SOLUTION:
For optimum use, the treadmill needs to be level. Refer to the section on leveling
your treadmill.
HEART RATE TROUBLESHOOTING
LEVELER
Check your exercise environment for sources of interference such as fluorescent lights, computers, or
appliances containing large motors. These items may cause erratic heart rate readouts.
TRANSPORT WHEEL
RUNNING BELT
13 HORIZON T30 & T40
You may experience an erratic readout under the following conditions:
• Gripping the heart rate handlebars too tight. Try to maintain
moderate pressure while holding onto the heart rate handlebars.
28 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 15
USING YOUR ADVENTURE PROGRAM
GETTING STARTED
QUICK START UP
Your Adventure Program is designed to allow you to create your own programming, with the ability to
save your program settings for future workouts. To use your Adventure Program, follow these instructions:
Simply press the Start button to begin exercising.
1. Once the Adventure Program has been selected, press ‘Select’.
2. Choose your desired time using the + or - speed or incline keys and press ‘Select’.
3. Choose your desired speed using the + or - speed or incline keys and press ‘Select’. You will need
to select a speed for all 15 segments, pressing ‘Select’ after each segment.
4. Once all 15 speed segments have been chosen, you will need to select your desired incline level
for each segment as well. Choose your desired incline level using the + or - speed or incline keys and
press ‘Select’. Once you have chosen your desired incline level for all 15 segments, press ‘Start’ to
begin your program. At this time, your program has been successfully saved into memory, and can
be used for future workouts.
PAUSE
Press the Stop button to pause your workout.
RESET
5. To reset your program information and delete it from memory, press and hold the ‘Select’ button
Press and hold the Stop button to reset the treadmill.
for 5 seconds once you have selected the Adventure Program in the start menu.
6. While using your saved program in the Adventure Program, you are able to adjust the speed or
incline, but any changes will not be saved.
27 HORIZON SERIES
14 HORIZON T30 & T40
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 16
QUICK SPEED KEYS
TARGET ZONE
When in a program, the user is able to press any of the desired quick speed keys to get to a specific speed more quickly. NOTE: When in a speed-based program, if the user presses any of the
quick speed keys, all of the remaining speed segments in the program will be modified as well. For
example, when in P2, the first segment default speed is 2.5 mph. If the user presses the 4 mph quick
speed key, all of the remaining segments will increase by 1.5 mph as well.
Your Target Zone is a percentage of your maximum heart rate. Target Zone will vary for each individual, depending on age, current level of conditioning, and personal fitness goals. The American
Heart Association recommends working-out at a Target Heart Rate Zone of between 60% and 75% of
your maximum heart rate. See the chart below for convenient reference.
EXAMPLE: for a 42-year old user: find AGE along the bottom of the chart (round to 40), follow AGE
column up to the TARGET ZONE BAR. RESULTS: 60% of maximum Hear Rate = 108 Beats Per Minute,
75% of maximum Heart Rate = 135 Beat Per Minute.
CHANGING THE SPEED AND ELEVATION
When in a program, the user is able to change the difficulty of the program by pressing the plus (+)
or minus (-) buttons to the desired level. NOTE: The user is only able to increase or decrease the elevation or speed during the program. When in a program, if the user increases or decreases the difficulty of speed or elevation, all of the remaining program speeds or elevation segments will be modified as well. For example, when in P2, the first segment default speed is 2.5 mph. If this speed is
increased by 1 mph, all of the remaining segments will be increased by 1mph as well.
HEART RATE HANDLEBARS
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for
your heart rate to register. When griping the pulse handlebars, do not grip tightly. Holding the grips
tightly may elevate your blood pressure. Keep a loose, cupping hold. It is recommended that you hold
the grip pulse handlebars only long enough to see your heart rate readout on the console. You may
experience an erratic readout if consistently holding the grip pulse handlebars.
TELEMETRIC CHEST TRANSMITTER (OPTIONAL)
Prior to wearing the chest transmitter on your chest, moisten the two rubber electrodes with water.
Center the chest strap just below the breast or pectoral muscles, directly over your sternum, NOTE:
The chest strap must be tight and properly placed to receive an accurate and consistent readout. If
the chest strap is too loose, or positioned improperly, you may receive an erratic or inconsistent heart
rate readout. WARNING! The heart rate function is not a medical device. Various factors may affect
the accuracy of your heart rate reading. The heart rate reading is intended only as an exercise aid.
NOTE: Horizon T40 MODEL ONLY.
15 HORIZON T30 & T40
26 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 17
U S I N G Y O U R P U L S E Z o n e TM P R O G R A M
(T40 MODEL ONLY)
Once the ‘THR Zone’ quick program key is selected, wait for 5 seconds and you will see the target
heart rate flashing in the Heart Rate window. Using the chart on page 26, determine your target
heart rate. Your target heart rate should be set at a number that you will be able to exercise at
throughout the majority of your workout. To adjust the target heart rate, press the plus (+) or minus
(-) buttons.
Once you have chosen your target heart rate, wait for five seconds and you will see the time flashing in the Time window. Press the plus (+) or minus (-) buttons to adjust your time. Once you choose
your time, press the 'Start' button and begin your workout.
The ‘THR Zone’ program will have a 5 minute warm up time before it will get you in your ‘target heart
rate zone’.
After the 5 minute warm up period, the resistance level will increase gradually to get the user to the
entered ‘target heart rate zone’. Once the user is at the ‘target heart rate zone’, plus or minus 5
beats, the resistance level will remain at the current resistance level.
CHOOSING A PROGRAM
Choose a Program by pressing the + or - speed
buttons. Once the desired programs is selected,
press the SELECT button. You are also able to press
the numbered quick speed key which correlates
with the numbered program to choose your desired
program. For example press the number 1 quickspeed key for program number 1.
CHOOSING THE LEVEL
Choose the program difficulty level, level 1-10, by pressing the + or - speed buttons. Available only
on certain programs. You may also choose your program level by pressing the numbered quick speed
key that correlates with the program level number. For example, to choose a program level of 5, simply press quick speed key number 5. Once the program level has been chosen, press the ‘select’ button. Once in a program, the user may change the difficulty level by pressing the + or - speed keys
or by pressing the quick speed keys. NOTE: If one segment is changed, the entire program will in turn
be changed. For example, when in a program, if the user increases the speed 1 mph, all of the
remaining segments will also be increased by 1 mph.
The last 5 minutes of the program will begin the cool down period. At this time, the program will gradually decrease the resistance level to give the
user a smooth cool down.
NOTE: The Chest Strap Transmitter is required to use the ‘THR Zone’ program.
CHOOSING THE TIME
Choose Time by pressing the + or - speed buttons
or use the default time. Once the desired time is
selected, press the START button.
CHEST STRAP TRANSMITTER PLACEMENT AND
MOISTENING THE ELECTRODES
APPLY MOISTURE HERE
FINISHING A WORKOUT
When your workout is finished, the treadmill console will
beep and ‘END’ will be flashing in the Time window. Your
workout information will stay displayed on the console for
30 seconds before it will reset.
BACKSIDE OF CHEST TRANSMITTER
LOGO
25 HORIZON T40
16 HORIZON T30 & T40
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 18
DISPLAY
USING YOUR RACE PROGRAM
SELECT
Used to view your Calories and Laps during your
workout.
Your Race Program is designed to add motivation to a workout by allowing you to compete against a
selected pacer. To use your Race Program, follow these instructions:
1. Once the Race Program is selected, Press ‘Select’.
CALORIES
2. Choose the desired Pace (speed) using the + or - speed or incline keys and press ‘Select’. The
selected pace is the pace you will be racing against. You will choose your own speed after the program started.
Total Calories burned during your workout.
3. To choose your desired distance press the + or - speed or incline keys and press ‘Select’. NOTE:
your program time will be set according to your speed and distance.
DISTANCE
Miles traveled during your workout.
4. Once the desired Pace (Speed) and distance has been chosen, press the ‘Start’ key.
5. Upon pressing ‘Start’, the program will be broken up into 10 segments (which will not be displayed
on console as 8 LED lights). The first segment will be dedicated to a warm up, which will be half of
the selected pace (Speed) and will be set at 2.5 minutes. Segments 2-9 will consist of the Race
Program, with segment 10 being dedicated to a cool down period, which again will be half of the
selected Pace (Speed) segment will not be displayed. If the user beats the pacer to the finish line, the
speed window will flash, and the program will end.
TIME
Shown as Minutes:Seconds. View the time remaining
or the time elapsed in your workout.
6. You can adjust the your own speed at any time during the program by pressing the + or - speed
keys or by using the quick speed keys.
PULSE
Shown as Beats Per Minute. Used to monitor
your heart rate during your workout (displayed when contact is made with both grips
or the chest strap is used).
17 HORIZON T30 & T40
24 HORIZON SERIES
Page 19
2:56 PM
7/5/2003
horizon T20, 30, 40 owner’s guidev1.0.qxd
Shown in the top left-hand window. Indicates the
incline of your walking or running surface.
SPEED
Shown in the top right-hand display window.
Indicates how fast your walking or running surface
is moving.
PROGRAM PROFILE
Represents the Program profile that you have
chosen.
(Horizon T30 AND T40)
11
12
13
14
15
16
17
18
19
20
21
23
24
25
26
27
28
29
30
elevation 0.5 1.0 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.5 1.0 0.5
10
Level 1
elevation 1.0 1.5 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.0
9
Level 2
elevation 1.5 2.0 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 1.5
8
Level 3
elevation 2.0 2.5 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.0
7
Level 4
elevation 2.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 2.5
6
Level 5
elevation 2.5 3.5 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.0 2.5
5
Level 6
elevation 2.5 3.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 3.0 2.5
4
Level 7
elevation 2.5 4.0 4.5 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 4.5 3.0 2.5
Speed 2.5 4.0 7.0 9.0 7.0 9.0 7.0 9.5 7.5 9.5 7.5 9.5 8.0 9.5 8.0 9.5 8.0 9.5 8.0 9.5 7.5 9.5 7.5 9.0 6.5 8.5 6.5 5.0 3.0 2.5
Speed 2.5 4.0 6.5 8.5 6.5 8.5 6.5 9.0 7.0 9.0 7.0 9.0 7.5 9.0 7.5 9.0 7.5 9.0 7.5 9.0 7.0 9.0 7.0 8.5 6.0 8.5 6.0 5.0 3.0 2.5
Speed 2.5 4.0 6.0 8.0 6.0 8.0 6.0 8.5 6.5 8.5 6.5 8.5 7.0 8.5 7.0 8.5 7.0 8.5 7.0 8.5 6.5 8.5 6.5 8.0 5.5 8.0 6.0 5.0 3.0 2.5
Speed 2.5 3.5 5.5 7.5 5.5 7.5 5.5 8.0 6.0 8.0 6.0 8.0 6.5 8.0 6.5 8.0 6.5 8.0 6.5 8.0 6.0 8.0 6.0 8.0 5.5 7.5 5.5 5.0 3.0 2.5
Speed 2.5 3.5 5.0 7.0 5.0 7.0 5.0 7.5 5.5 7.5 5.5 7.5 6.0 7.5 6.0 7.5 6.0 7.5 6.0 7.5 5.5 7.5 5.5 7.5 5.0 7.0 5.0 5.0 3.0 2.5
Speed 2.5 3.5 4.5 6.5 4.5 6.5 4.5 7.0 5.0 7.0 5.0 7.0 5.5 7.0 5.5 7.0 5.5 7.0 5.5 7.0 5.0 7.0 5.0 7.0 4.5 6.5 4.5 5.0 3.0 2.5
Speed 2.5 3.0 4.0 6.0 4.0 6.0 4.0 6.5 4.5 6.5 4.5 6.5 5.0 6.5 5.0 6.5 5.0 6.5 5.0 6.5 4.5 6.5 4.5 6.5 4.0 6.0 4.0 4.5 3.0 2.5
Speed 2.5 3.0 4.0 5.5 3.5 5.5 3.5 6.0 4.0 6.0 4.0 6.0 4.5 6.0 4.5 6.0 4.5 6.0 4.5 6.0 4.0 6.0 4.0 6.0 3.5 5.5 3.5 4.5 3.0 2.5
Speed 2.5 3.0 3.5 5.0 3.5 4.5 3.5 5.5 3.5 5.5 3.5 5.5 4.0 5.5 4.0 5.5 4.0 5.5 4.0 5.5 3.5 5.5 3.5 5.5 3.5 5.0 3.5 4.5 3.0 2.5
Speed 2.5 3.0 3.0 4.5 3.0 4.0 3.0 5.0 3.0 5.0 3.0 5.0 3.5 5.0 3.5 5.0 3.5 5.0 3.5 5.0 3.0 5.0 3.0 5.0 3.0 4.5 3.0 4.0 3.0 2.5
Level 8
3
One lap around the profile
window equals 1/4 of a mile. (Manual
program only)
elevation 2.5 4.0 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.0 3.0 2.5
2
LAP PROFILE
Level 9
1
(Horizon T20)
One lap around the profile
window equals 1/4 of a mile. (Manual
program only)
elevation 2.0 4.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 9.0 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 5.5 5.0 3.0 2.5
22
LAP PROFILE
ROCK CLIMB: Elevation and speed changes; time defaults to 30 minutes
ELEVATION
Level 10
18 HORIZON T30 & T40
23 HORIZON SERIES
DISPLAY
11
12
13
14
15
16
17
18
19
20
AFTER BURNER: Elevation changes; time defaults to 30 minutes
10
21
22
23
24
25
26
27
28
29
30
0.5 1.0 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.5 1.0 0.5
9
1.0 1.5 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.0
8
Level 1
1.5 2.0 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 1.5
7
Level 2
2.0 2.5 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.0
6
Level 3
2.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 2.5
5
Level 4
2.5 3.5 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.0 2.5
4
Level 5
2.5 3.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 3.0 2.5
3
Level 6
2.5 4.0 4.5 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 4.5 3.0 2.5
2
Level 7
2.5 4.0 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.0 3.0 2.5
1
Level 8
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
2.5 4.0 5.5 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 9.0 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 5.5 3.0 2.5
Level 9
Level 10
10
HILL CLIMB: Elevation and speed changes; time defaults to 30 minutes
9
elevation 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 0.0
8
Level 1
elevation 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 0.0
7
Level 2
elevation 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 0.5 0.5 0.5 0.5 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 0.0
6
Level 3
elevation 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 1.0 1.0 1.0 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5
5
Level 4
elevation 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5
4
Level 5
elevation 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5
3
Level 6
elevation 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0
2
Level 7
elevation 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 1.5 1.5 1.5 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0
1
Level 8
elevation 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0
Speed 2.5 3.0 3.0 3.5 3.0 3.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 3.5 3.0 3.5 3.0 3.5 3.0 2.5
Speed 2.5 3.0 3.5 4.0 3.5 4.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 4.0 3.5 4.0 3.5 4.0 3.0 2.5
Speed 2.5 3.0 4.0 4.5 4.0 4.5 6.0 6.5 6.0 6.5 6.0 6.5 6.5 6.5 6.0 6.5 6.0 6.5 6.0 6.5 6.0 6.5 6.0 4.5 4.0 4.5 4.0 4.5 3.0 2.5
Speed 2.5 3.5 4.5 5.0 4.5 5.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 5.0 4.5 5.0 4.5 4.5 3.0 2.5
Speed 2.5 3.5 5.0 5.5 5.0 5.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 5.5 5.0 5.5 5.0 4.5 3.0 2.5
Speed 2.5 3.5 5.5 6.0 5.5 6.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 6.0 5.5 6.0 5.5 5.0 3.0 2.5
Speed 2.5 4.0 6.0 6.5 6.0 6.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 6.5 6.0 6.5 6.0 5.0 3.0 2.5
CROSS COUNTRY
Speed changes; time defaults to 30 minutes
(Horizon T30 AND T40)
HILL RUN
Speed changes; time defaults to 30 minutes
(Horizon T30 AND T40)
AFTER BURNER
Elevation changes; time defaults to 30 minutes
(Horizon T30 AND T40)
HILL CLIMB
2
2.5 4.0 6.5 7.5 7.0 7.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 7.5 7.0 7.5 6.5 5.5 3.0 2.5
1
2
Speed 2.5 4.0 6.5 7.0 6.5 7.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 7.0 6.5 7.0 6.5 5.0 3.0 2.5
Speed
Customized workout, with no default time
(ALL HORIZON MODELS)
22 HORIZON T30 & T40
19 HORIZON SERIES
Speed 2.5 3.0 3.0 3.5 3.0 3.5 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 3.5 3.0 3.5 3.0 3.5 3.0 2.5
Level 9
elevation 1.0 1.0 1.0 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 3.0 3.0 2.5 2.5 2.5 2.5 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.0 1.0 1.0
PROGRAM PROFILES
Level 10
MANUAL
2
1
2
1
2
1
1
Elevation and speed changes; time defaults to 30
minutes
(Horizon T30 AND T40)
Page 20
2:56 PM
7/5/2003
horizon T20, 30, 40 owner’s guidev1.0.qxd
Page 21
2:56 PM
7/5/2003
horizon T20, 30, 40 owner’s guidev1.0.qxd
1
2
2
Elevation and speed changes; time defaults to 30
minutes
(Horizon T30 AND T40)
RACE
Speed changes; time defaults to 30 minutes
(Horizon T30 AND T40)
Level 8
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4.0
4.0
4.0
3.5
3.5
3.5
3.0
3.0
3.0
3.0
2
Level 9
1
Level 10
6.5
6.0
5.5
5.0
4.5
4.0
4.0
3.5
3.0
3
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.5
3.0
5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
4.5
4.0
6
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.5
3.0
7
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
8
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
9
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
10
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
11
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
12
13
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
25
26
27
28
29
2.5
30
24
2.5
23
3.0
22
4.0
21
17
3.0
20
16
4.5
19
15
3.0
2.5
18
14
5.0
3.0
3.0
5.0
4.5
5.0
3.5
3.5
3.0
5.0
5.0
5.0
3.5
3.5
2.5
3.5
5.0
5.5
3.0
3.5
5.5
4.5
5.5
4.0
3.5
3.5
5.5
5.5
5.5
4.0
3.5
2.5
4.0
5.5
6.0
3.0
4.0
6.0
4.5
6.0
4.5
4.0
2.5
4.0
6.0
6.0
3.0
2.5
6.0
4.5
4.0
3.0
2.5
4.5
6.0
6.5
5.0
3.0
2.5
4.5
6.5
5.0
3.0
2.5
6.5
5.0
4.5
5.0
3.0
4.5
6.5
6.5
5.0
5.0
3.0
6.5
5.0
4.5
5.5
5.0
5.0
6.5
7.0
7.0
6.0
5.0
5.0
7.0
7.5
6.0
7.0
5.5
5.0
8.0
6.5
5.0
7.0
5.5
8.5
7.0
5.5
7.5
5.5
9.0
5.5
7.0
8.0
6.0
5.5
7.5
8.0
6.5
7.5
6.0
8.5
30
5.5
7.5
9.0
2.5
24
29
23
28
22
27
21
26
20
25
7.5
6.0
19
2.5
3.5
3.0
4.5
3.5
5.0
3.0
4.5
3.5
5.0
3.0
6.0
7.5
4.5
2.5
3.5
3.0
5.0
3.5
5.5
3.0
5.0
3.5
5.5
3.0
6.0
8.0
18
5.0
2.5
4.0
3.0
5.5
4.0
6.0
3.5
5.5
4.0
6.0
3.5
8.0
6.5
5.0
5.5
2.5
4.5
3.0
6.0
4.5
6.5
4.0
6.0
4.5
6.5
4.0
6.0
8.0
17
5.5
6.0
2.5
5.0
3.0
6.5
4.5
7.0
4.5
6.5
5.0
7.0
4.5
8.0
6.5
4.5
6.0
6.5
5.5
2.5
6.0
3.0
7.0
6.5
3.5
3.0
7.5
7.0
4.5
7.5
8.0
7.5
5.0
8.0
8.5
5.0
7.0
8.5
9.0
5.5
7.5
9.0
5.5
7.5
8.0
9.5
6.0
8.0
8.5
5.0
6.5
8.0
16
5.0
6.5
7.0
8.5
9.0
5.5
6.5
8.5
5.0
5.5
7.0
7.5
9.0
2.5
8.5
7.0
15
5.5
6.0
7.5
8.0
9.5
2.5
6.5
8.5
4.5
6.0
6.5
8.0
8.5
3.0
8.5
7.0
14
5.0
6.5
7.0
8.5
9.0
5.0
7.0
8.5
5.0
5.5
7.0
7.5
9.0
6.0
7.0
9.0
13
5.5
6.0
7.5
8.0
9.5
6.5
7.5
9.5
4.5
6.0
6.5
8.0
8.5
6.0
9.0
7.5
12
5.0
6.5
7.0
8.5
9.0
3.0
9.5
8.0
5.0
5.5
7.0
7.5
9.0
3.0
7.0
9.0
11
5.5
6.5
7.5
8.0
9.5
5.0
7.5
9.5
4.5
6.0
6.5
8.0
8.5
5.0
9.0
7.5
1
5.0
6.5
7.0
8.5
9.0
6.5
9.5
8.0
2.5 3.0 3.0 3.5 3.0 3.5 4.5 5.0 4.5 5.0
5.5
7.0
7.5
9.0
6.0
7.5
9.0
2.5 3.0 3.0 3.5 3.0 3.5 5.0 5.5 5.0 5.5
6.0
7.5
8.0
9.5
7.0
8.0
9.5
Level 1
2.5 3.0 3.5 4.0 3.5 4.0 5.5 6.0 5.5 6.0
6.5
8.0
8.5
10
Level 2
2.5 3.0 4.0 4.5 4.0 4.5 6.0 6.5 6.0 6.5
7.0
8.5
9.0
9
Level 3
2.5 3.5 4.5 5.0 4.5 5.0 6.5 7.0 6.5 7.0
7.5
9.0
8
Level 4
2.5 3.5 5.0 5.5 5.0 5.5 7.0 7.5 7.0 7.5
8.0
8.5
7
Level 5
2.5 3.5 5.5 6.0 5.5 6.0 7.5 8.0 7.5 8.0
8.5
6
Level 6
2.5 4.0 6.0 6.5 6.0 6.5 8.0 8.5 8.0 8.5
9.0
5
Level 7
2.5 4.0 6.5 7.0 6.5 7.0 8.5 9.0 8.5 9.0
4
Level 8
2.5 4.0 7.0 7.5 7.0 7.5 9.0 9.5 9.0 9.5
6.5
Customized workout, time defaults to
30 minutes
(Horizon T40)
6.5
ADVENTURE 2 (USER PROGRAM)
7.0
Customized workout, time defaults to
30 minutes
(Horizon T30 AND T40)
Level 9
3
2
ADVENTURE 1 (USER PROGRAM)
Level 10
HILL RUN: Speed changes; time defaults to 30 minutes
7.0
CROSS COUNTRY: Speed chages; time defaults to 30 minutes
ROCK CLIMB
2
Adventure
1
Adventure
1
2
Elevation changes to keep you in your target
heart rate; time defaults to 30 minutes
(Horizon T40)
1
2
1
PULSE ZoneTM
20 HORIZON T30 & T40
21 HORIZON T30 & T40
PROGRAM PROFILES
Page 21
2:56 PM
7/5/2003
horizon T20, 30, 40 owner’s guidev1.0.qxd
1
2
2
Elevation and speed changes; time defaults to 30
minutes
(Horizon T30 AND T40)
RACE
Speed changes; time defaults to 30 minutes
(Horizon T30 AND T40)
Level 8
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4.0
4.0
4.0
3.5
3.5
3.5
3.0
3.0
3.0
3.0
2
Level 9
1
Level 10
6.5
6.0
5.5
5.0
4.5
4.0
4.0
3.5
3.0
3
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.5
3.0
5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
4.5
4.0
6
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.5
3.0
7
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
8
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
9
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
10
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
11
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
12
13
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
25
26
27
28
29
2.5
30
24
2.5
23
3.0
22
4.0
21
17
3.0
20
16
4.5
19
15
3.0
2.5
18
14
5.0
3.0
3.0
5.0
4.5
5.0
3.5
3.5
3.0
5.0
5.0
5.0
3.5
3.5
2.5
3.5
5.0
5.5
3.0
3.5
5.5
4.5
5.5
4.0
3.5
3.5
5.5
5.5
5.5
4.0
3.5
2.5
4.0
5.5
6.0
3.0
4.0
6.0
4.5
6.0
4.5
4.0
2.5
4.0
6.0
6.0
3.0
2.5
6.0
4.5
4.0
3.0
2.5
4.5
6.0
6.5
5.0
3.0
2.5
4.5
6.5
5.0
3.0
2.5
6.5
5.0
4.5
5.0
3.0
4.5
6.5
6.5
5.0
5.0
3.0
6.5
5.0
4.5
5.5
5.0
5.0
6.5
7.0
7.0
6.0
5.0
5.0
7.0
7.5
6.0
7.0
5.5
5.0
8.0
6.5
5.0
7.0
5.5
8.5
7.0
5.5
7.5
5.5
9.0
5.5
7.0
8.0
6.0
5.5
7.5
8.0
6.5
7.5
6.0
8.5
30
5.5
7.5
9.0
2.5
24
29
23
28
22
27
21
26
20
25
7.5
6.0
19
2.5
3.5
3.0
4.5
3.5
5.0
3.0
4.5
3.5
5.0
3.0
6.0
7.5
4.5
2.5
3.5
3.0
5.0
3.5
5.5
3.0
5.0
3.5
5.5
3.0
6.0
8.0
18
5.0
2.5
4.0
3.0
5.5
4.0
6.0
3.5
5.5
4.0
6.0
3.5
8.0
6.5
5.0
5.5
2.5
4.5
3.0
6.0
4.5
6.5
4.0
6.0
4.5
6.5
4.0
6.0
8.0
17
5.5
6.0
2.5
5.0
3.0
6.5
4.5
7.0
4.5
6.5
5.0
7.0
4.5
8.0
6.5
4.5
6.0
6.5
5.5
2.5
6.0
3.0
7.0
6.5
3.5
3.0
7.5
7.0
4.5
7.5
8.0
7.5
5.0
8.0
8.5
5.0
7.0
8.5
9.0
5.5
7.5
9.0
5.5
7.5
8.0
9.5
6.0
8.0
8.5
5.0
6.5
8.0
16
5.0
6.5
7.0
8.5
9.0
5.5
6.5
8.5
5.0
5.5
7.0
7.5
9.0
2.5
8.5
7.0
15
5.5
6.0
7.5
8.0
9.5
2.5
6.5
8.5
4.5
6.0
6.5
8.0
8.5
3.0
8.5
7.0
14
5.0
6.5
7.0
8.5
9.0
5.0
7.0
8.5
5.0
5.5
7.0
7.5
9.0
6.0
7.0
9.0
13
5.5
6.0
7.5
8.0
9.5
6.5
7.5
9.5
4.5
6.0
6.5
8.0
8.5
6.0
9.0
7.5
12
5.0
6.5
7.0
8.5
9.0
3.0
9.5
8.0
5.0
5.5
7.0
7.5
9.0
3.0
7.0
9.0
11
5.5
6.5
7.5
8.0
9.5
5.0
7.5
9.5
4.5
6.0
6.5
8.0
8.5
5.0
9.0
7.5
1
5.0
6.5
7.0
8.5
9.0
6.5
9.5
8.0
2.5 3.0 3.0 3.5 3.0 3.5 4.5 5.0 4.5 5.0
5.5
7.0
7.5
9.0
6.0
7.5
9.0
2.5 3.0 3.0 3.5 3.0 3.5 5.0 5.5 5.0 5.5
6.0
7.5
8.0
9.5
7.0
8.0
9.5
Level 1
2.5 3.0 3.5 4.0 3.5 4.0 5.5 6.0 5.5 6.0
6.5
8.0
8.5
10
Level 2
2.5 3.0 4.0 4.5 4.0 4.5 6.0 6.5 6.0 6.5
7.0
8.5
9.0
9
Level 3
2.5 3.5 4.5 5.0 4.5 5.0 6.5 7.0 6.5 7.0
7.5
9.0
8
Level 4
2.5 3.5 5.0 5.5 5.0 5.5 7.0 7.5 7.0 7.5
8.0
8.5
7
Level 5
2.5 3.5 5.5 6.0 5.5 6.0 7.5 8.0 7.5 8.0
8.5
6
Level 6
2.5 4.0 6.0 6.5 6.0 6.5 8.0 8.5 8.0 8.5
9.0
5
Level 7
2.5 4.0 6.5 7.0 6.5 7.0 8.5 9.0 8.5 9.0
4
Level 8
2.5 4.0 7.0 7.5 7.0 7.5 9.0 9.5 9.0 9.5
6.5
Customized workout, time defaults to
30 minutes
(Horizon T40)
6.5
ADVENTURE 2 (USER PROGRAM)
7.0
Customized workout, time defaults to
30 minutes
(Horizon T30 AND T40)
Level 9
3
2
ADVENTURE 1 (USER PROGRAM)
Level 10
HILL RUN: Speed changes; time defaults to 30 minutes
7.0
CROSS COUNTRY: Speed chages; time defaults to 30 minutes
ROCK CLIMB
2
Adventure
1
Adventure
1
2
Elevation changes to keep you in your target
heart rate; time defaults to 30 minutes
(Horizon T40)
1
2
1
PULSE ZoneTM
20 HORIZON T30 & T40
21 HORIZON T30 & T40
PROGRAM PROFILES
11
12
13
14
15
16
17
18
19
20
AFTER BURNER: Elevation changes; time defaults to 30 minutes
10
21
22
23
24
25
26
27
28
29
30
0.5 1.0 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.5 1.0 0.5
9
1.0 1.5 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.0
8
Level 1
1.5 2.0 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 1.5
7
Level 2
2.0 2.5 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.0
6
Level 3
2.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 2.5
5
Level 4
2.5 3.5 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.0 2.5
4
Level 5
2.5 3.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 3.0 2.5
3
Level 6
2.5 4.0 4.5 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 4.5 3.0 2.5
2
Level 7
2.5 4.0 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.0 3.0 2.5
1
Level 8
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
2.5 4.0 5.5 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 9.0 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 5.5 3.0 2.5
Level 9
Level 10
10
HILL CLIMB: Elevation and speed changes; time defaults to 30 minutes
9
elevation 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 0.0
8
Level 1
elevation 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 0.0
7
Level 2
elevation 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 0.5 0.5 0.5 0.5 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 0.0
6
Level 3
elevation 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 1.0 1.0 1.0 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5
5
Level 4
elevation 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5
4
Level 5
elevation 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5
3
Level 6
elevation 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0
2
Level 7
elevation 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 1.5 1.5 1.5 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0
1
Level 8
elevation 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0
Speed 2.5 3.0 3.0 3.5 3.0 3.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 5.0 3.5 3.0 3.5 3.0 3.5 3.0 2.5
Speed 2.5 3.0 3.5 4.0 3.5 4.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 6.0 5.5 4.0 3.5 4.0 3.5 4.0 3.0 2.5
Speed 2.5 3.0 4.0 4.5 4.0 4.5 6.0 6.5 6.0 6.5 6.0 6.5 6.5 6.5 6.0 6.5 6.0 6.5 6.0 6.5 6.0 6.5 6.0 4.5 4.0 4.5 4.0 4.5 3.0 2.5
Speed 2.5 3.5 4.5 5.0 4.5 5.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 7.0 6.5 5.0 4.5 5.0 4.5 4.5 3.0 2.5
Speed 2.5 3.5 5.0 5.5 5.0 5.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 7.5 7.0 5.5 5.0 5.5 5.0 4.5 3.0 2.5
Speed 2.5 3.5 5.5 6.0 5.5 6.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 8.0 7.5 6.0 5.5 6.0 5.5 5.0 3.0 2.5
Speed 2.5 4.0 6.0 6.5 6.0 6.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 8.5 8.0 6.5 6.0 6.5 6.0 5.0 3.0 2.5
CROSS COUNTRY
Speed changes; time defaults to 30 minutes
(Horizon T30 AND T40)
HILL RUN
Speed changes; time defaults to 30 minutes
(Horizon T30 AND T40)
AFTER BURNER
Elevation changes; time defaults to 30 minutes
(Horizon T30 AND T40)
HILL CLIMB
2
2.5 4.0 6.5 7.5 7.0 7.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 9.5 9.0 7.5 7.0 7.5 6.5 5.5 3.0 2.5
1
2
Speed 2.5 4.0 6.5 7.0 6.5 7.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 9.0 8.5 7.0 6.5 7.0 6.5 5.0 3.0 2.5
Speed
Customized workout, with no default time
(ALL HORIZON MODELS)
22 HORIZON T30 & T40
19 HORIZON SERIES
Speed 2.5 3.0 3.0 3.5 3.0 3.5 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 5.0 4.5 3.5 3.0 3.5 3.0 3.5 3.0 2.5
Level 9
elevation 1.0 1.0 1.0 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 3.0 3.0 2.5 2.5 2.5 2.5 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.0 1.0 1.0
PROGRAM PROFILES
Level 10
MANUAL
2
1
2
1
2
1
1
Elevation and speed changes; time defaults to 30
minutes
(Horizon T30 AND T40)
Page 20
2:56 PM
7/5/2003
horizon T20, 30, 40 owner’s guidev1.0.qxd
Page 19
2:56 PM
7/5/2003
horizon T20, 30, 40 owner’s guidev1.0.qxd
Shown in the top left-hand window. Indicates the
incline of your walking or running surface.
SPEED
Shown in the top right-hand display window.
Indicates how fast your walking or running surface
is moving.
PROGRAM PROFILE
Represents the Program profile that you have
chosen.
(Horizon T30 AND T40)
11
12
13
14
15
16
17
18
19
20
21
23
24
25
26
27
28
29
30
elevation 0.5 1.0 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.5 1.0 0.5
10
Level 1
elevation 1.0 1.5 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.5 1.0
9
Level 2
elevation 1.5 2.0 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 1.5
8
Level 3
elevation 2.0 2.5 3.0 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.0
7
Level 4
elevation 2.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 2.5
6
Level 5
elevation 2.5 3.5 4.0 4.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 4.0 4.0 3.0 2.5
5
Level 6
elevation 2.5 3.5 4.5 5.0 5.0 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.5 4.5 3.0 2.5
4
Level 7
elevation 2.5 4.0 4.5 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.5 5.0 4.5 3.0 2.5
Speed 2.5 4.0 7.0 9.0 7.0 9.0 7.0 9.5 7.5 9.5 7.5 9.5 8.0 9.5 8.0 9.5 8.0 9.5 8.0 9.5 7.5 9.5 7.5 9.0 6.5 8.5 6.5 5.0 3.0 2.5
Speed 2.5 4.0 6.5 8.5 6.5 8.5 6.5 9.0 7.0 9.0 7.0 9.0 7.5 9.0 7.5 9.0 7.5 9.0 7.5 9.0 7.0 9.0 7.0 8.5 6.0 8.5 6.0 5.0 3.0 2.5
Speed 2.5 4.0 6.0 8.0 6.0 8.0 6.0 8.5 6.5 8.5 6.5 8.5 7.0 8.5 7.0 8.5 7.0 8.5 7.0 8.5 6.5 8.5 6.5 8.0 5.5 8.0 6.0 5.0 3.0 2.5
Speed 2.5 3.5 5.5 7.5 5.5 7.5 5.5 8.0 6.0 8.0 6.0 8.0 6.5 8.0 6.5 8.0 6.5 8.0 6.5 8.0 6.0 8.0 6.0 8.0 5.5 7.5 5.5 5.0 3.0 2.5
Speed 2.5 3.5 5.0 7.0 5.0 7.0 5.0 7.5 5.5 7.5 5.5 7.5 6.0 7.5 6.0 7.5 6.0 7.5 6.0 7.5 5.5 7.5 5.5 7.5 5.0 7.0 5.0 5.0 3.0 2.5
Speed 2.5 3.5 4.5 6.5 4.5 6.5 4.5 7.0 5.0 7.0 5.0 7.0 5.5 7.0 5.5 7.0 5.5 7.0 5.5 7.0 5.0 7.0 5.0 7.0 4.5 6.5 4.5 5.0 3.0 2.5
Speed 2.5 3.0 4.0 6.0 4.0 6.0 4.0 6.5 4.5 6.5 4.5 6.5 5.0 6.5 5.0 6.5 5.0 6.5 5.0 6.5 4.5 6.5 4.5 6.5 4.0 6.0 4.0 4.5 3.0 2.5
Speed 2.5 3.0 4.0 5.5 3.5 5.5 3.5 6.0 4.0 6.0 4.0 6.0 4.5 6.0 4.5 6.0 4.5 6.0 4.5 6.0 4.0 6.0 4.0 6.0 3.5 5.5 3.5 4.5 3.0 2.5
Speed 2.5 3.0 3.5 5.0 3.5 4.5 3.5 5.5 3.5 5.5 3.5 5.5 4.0 5.5 4.0 5.5 4.0 5.5 4.0 5.5 3.5 5.5 3.5 5.5 3.5 5.0 3.5 4.5 3.0 2.5
Speed 2.5 3.0 3.0 4.5 3.0 4.0 3.0 5.0 3.0 5.0 3.0 5.0 3.5 5.0 3.5 5.0 3.5 5.0 3.5 5.0 3.0 5.0 3.0 5.0 3.0 4.5 3.0 4.0 3.0 2.5
Level 8
3
One lap around the profile
window equals 1/4 of a mile. (Manual
program only)
elevation 2.5 4.0 5.5 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 6.0 5.5 5.0 3.0 2.5
2
LAP PROFILE
Level 9
1
(Horizon T20)
One lap around the profile
window equals 1/4 of a mile. (Manual
program only)
elevation 2.0 4.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 9.0 8.5 8.5 8.0 8.0 7.5 7.5 7.0 7.0 6.5 6.5 5.5 5.0 3.0 2.5
22
LAP PROFILE
ROCK CLIMB: Elevation and speed changes; time defaults to 30 minutes
ELEVATION
Level 10
18 HORIZON T30 & T40
23 HORIZON SERIES
DISPLAY
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 18
DISPLAY
USING YOUR RACE PROGRAM
SELECT
Used to view your Calories and Laps during your
workout.
Your Race Program is designed to add motivation to a workout by allowing you to compete against a
selected pacer. To use your Race Program, follow these instructions:
1. Once the Race Program is selected, Press ‘Select’.
CALORIES
2. Choose the desired Pace (speed) using the + or - speed or incline keys and press ‘Select’. The
selected pace is the pace you will be racing against. You will choose your own speed after the program started.
Total Calories burned during your workout.
3. To choose your desired distance press the + or - speed or incline keys and press ‘Select’. NOTE:
your program time will be set according to your speed and distance.
DISTANCE
Miles traveled during your workout.
4. Once the desired Pace (Speed) and distance has been chosen, press the ‘Start’ key.
5. Upon pressing ‘Start’, the program will be broken up into 10 segments (which will not be displayed
on console as 8 LED lights). The first segment will be dedicated to a warm up, which will be half of
the selected pace (Speed) and will be set at 2.5 minutes. Segments 2-9 will consist of the Race
Program, with segment 10 being dedicated to a cool down period, which again will be half of the
selected Pace (Speed) segment will not be displayed. If the user beats the pacer to the finish line, the
speed window will flash, and the program will end.
TIME
Shown as Minutes:Seconds. View the time remaining
or the time elapsed in your workout.
6. You can adjust the your own speed at any time during the program by pressing the + or - speed
keys or by using the quick speed keys.
PULSE
Shown as Beats Per Minute. Used to monitor
your heart rate during your workout (displayed when contact is made with both grips
or the chest strap is used).
17 HORIZON T30 & T40
24 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 17
U S I N G Y O U R P U L S E Z o n e TM P R O G R A M
(T40 MODEL ONLY)
Once the ‘THR Zone’ quick program key is selected, wait for 5 seconds and you will see the target
heart rate flashing in the Heart Rate window. Using the chart on page 26, determine your target
heart rate. Your target heart rate should be set at a number that you will be able to exercise at
throughout the majority of your workout. To adjust the target heart rate, press the plus (+) or minus
(-) buttons.
Once you have chosen your target heart rate, wait for five seconds and you will see the time flashing in the Time window. Press the plus (+) or minus (-) buttons to adjust your time. Once you choose
your time, press the 'Start' button and begin your workout.
The ‘THR Zone’ program will have a 5 minute warm up time before it will get you in your ‘target heart
rate zone’.
After the 5 minute warm up period, the resistance level will increase gradually to get the user to the
entered ‘target heart rate zone’. Once the user is at the ‘target heart rate zone’, plus or minus 5
beats, the resistance level will remain at the current resistance level.
CHOOSING A PROGRAM
Choose a Program by pressing the + or - speed
buttons. Once the desired programs is selected,
press the SELECT button. You are also able to press
the numbered quick speed key which correlates
with the numbered program to choose your desired
program. For example press the number 1 quickspeed key for program number 1.
CHOOSING THE LEVEL
Choose the program difficulty level, level 1-10, by pressing the + or - speed buttons. Available only
on certain programs. You may also choose your program level by pressing the numbered quick speed
key that correlates with the program level number. For example, to choose a program level of 5, simply press quick speed key number 5. Once the program level has been chosen, press the ‘select’ button. Once in a program, the user may change the difficulty level by pressing the + or - speed keys
or by pressing the quick speed keys. NOTE: If one segment is changed, the entire program will in turn
be changed. For example, when in a program, if the user increases the speed 1 mph, all of the
remaining segments will also be increased by 1 mph.
The last 5 minutes of the program will begin the cool down period. At this time, the program will gradually decrease the resistance level to give the
user a smooth cool down.
NOTE: The Chest Strap Transmitter is required to use the ‘THR Zone’ program.
CHOOSING THE TIME
Choose Time by pressing the + or - speed buttons
or use the default time. Once the desired time is
selected, press the START button.
CHEST STRAP TRANSMITTER PLACEMENT AND
MOISTENING THE ELECTRODES
APPLY MOISTURE HERE
FINISHING A WORKOUT
When your workout is finished, the treadmill console will
beep and ‘END’ will be flashing in the Time window. Your
workout information will stay displayed on the console for
30 seconds before it will reset.
BACKSIDE OF CHEST TRANSMITTER
LOGO
25 HORIZON T40
16 HORIZON T30 & T40
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 16
QUICK SPEED KEYS
TARGET ZONE
When in a program, the user is able to press any of the desired quick speed keys to get to a specific speed more quickly. NOTE: When in a speed-based program, if the user presses any of the
quick speed keys, all of the remaining speed segments in the program will be modified as well. For
example, when in P2, the first segment default speed is 2.5 mph. If the user presses the 4 mph quick
speed key, all of the remaining segments will increase by 1.5 mph as well.
Your Target Zone is a percentage of your maximum heart rate. Target Zone will vary for each individual, depending on age, current level of conditioning, and personal fitness goals. The American
Heart Association recommends working-out at a Target Heart Rate Zone of between 60% and 75% of
your maximum heart rate. See the chart below for convenient reference.
EXAMPLE: for a 42-year old user: find AGE along the bottom of the chart (round to 40), follow AGE
column up to the TARGET ZONE BAR. RESULTS: 60% of maximum Hear Rate = 108 Beats Per Minute,
75% of maximum Heart Rate = 135 Beat Per Minute.
CHANGING THE SPEED AND ELEVATION
When in a program, the user is able to change the difficulty of the program by pressing the plus (+)
or minus (-) buttons to the desired level. NOTE: The user is only able to increase or decrease the elevation or speed during the program. When in a program, if the user increases or decreases the difficulty of speed or elevation, all of the remaining program speeds or elevation segments will be modified as well. For example, when in P2, the first segment default speed is 2.5 mph. If this speed is
increased by 1 mph, all of the remaining segments will be increased by 1mph as well.
HEART RATE HANDLEBARS
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for
your heart rate to register. When griping the pulse handlebars, do not grip tightly. Holding the grips
tightly may elevate your blood pressure. Keep a loose, cupping hold. It is recommended that you hold
the grip pulse handlebars only long enough to see your heart rate readout on the console. You may
experience an erratic readout if consistently holding the grip pulse handlebars.
TELEMETRIC CHEST TRANSMITTER (OPTIONAL)
Prior to wearing the chest transmitter on your chest, moisten the two rubber electrodes with water.
Center the chest strap just below the breast or pectoral muscles, directly over your sternum, NOTE:
The chest strap must be tight and properly placed to receive an accurate and consistent readout. If
the chest strap is too loose, or positioned improperly, you may receive an erratic or inconsistent heart
rate readout. WARNING! The heart rate function is not a medical device. Various factors may affect
the accuracy of your heart rate reading. The heart rate reading is intended only as an exercise aid.
NOTE: Horizon T40 MODEL ONLY.
15 HORIZON T30 & T40
26 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 15
USING YOUR ADVENTURE PROGRAM
GETTING STARTED
QUICK START UP
Your Adventure Program is designed to allow you to create your own programming, with the ability to
save your program settings for future workouts. To use your Adventure Program, follow these instructions:
Simply press the Start button to begin exercising.
1. Once the Adventure Program has been selected, press ‘Select’.
2. Choose your desired time using the + or - speed or incline keys and press ‘Select’.
3. Choose your desired speed using the + or - speed or incline keys and press ‘Select’. You will need
to select a speed for all 15 segments, pressing ‘Select’ after each segment.
4. Once all 15 speed segments have been chosen, you will need to select your desired incline level
for each segment as well. Choose your desired incline level using the + or - speed or incline keys and
press ‘Select’. Once you have chosen your desired incline level for all 15 segments, press ‘Start’ to
begin your program. At this time, your program has been successfully saved into memory, and can
be used for future workouts.
PAUSE
Press the Stop button to pause your workout.
RESET
5. To reset your program information and delete it from memory, press and hold the ‘Select’ button
Press and hold the Stop button to reset the treadmill.
for 5 seconds once you have selected the Adventure Program in the start menu.
6. While using your saved program in the Adventure Program, you are able to adjust the speed or
incline, but any changes will not be saved.
27 HORIZON SERIES
14 HORIZON T30 & T40
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 14
KNOW YOUR TREADMILL
TROUBLESHOOTING YOUR TREADMILL
Horizon Fitness treadmills are designed to be reliable and easy to use. However, if
you experience a problem, please reference the troubleshooting guide listed below.
PROBLEM: The console does not light up.
SOLUTION: Verify that the power cord is plugged in properly to the outlet, and that the tread-
CONSOLE
WATER BOTTLE
HOLDER
mill switch is turned on.
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify that the treadmill is plugged into a dedicated 20amp circuit.
NOTE: no extension cord.
GRIP PULSE
HANDLEBARS
PROBLEM: The treadmill shuts off when elevating
SOLUTION: Verify that there is enough slack in the power cord to reach to the wall outlet during
TOUCH PAD
UPRIGHT
SUPPORT
elevation.
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify that the treadmill is on a level surface. Verify that the belt is properly tight-
MOTOR COVER
ened (refer to Centering The Belt.)
PROBLEM: The treadmill makes a clicking noise towards the front of the machine while walking or
SIDE RAIL
ROLLER
END CAP
running on it.
SOLUTION:
For optimum use, the treadmill needs to be level. Refer to the section on leveling
your treadmill.
HEART RATE TROUBLESHOOTING
LEVELER
Check your exercise environment for sources of interference such as fluorescent lights, computers, or
appliances containing large motors. These items may cause erratic heart rate readouts.
TRANSPORT WHEEL
RUNNING BELT
13 HORIZON T30 & T40
You may experience an erratic readout under the following conditions:
• Gripping the heart rate handlebars too tight. Try to maintain
moderate pressure while holding onto the heart rate handlebars.
28 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 13
• Constant movement and vibration due to constantly holding
the heart rate handlebars while exercising. If you are receiving
erratic heart rate readouts, try to only hold the grips long
enough to monitor your heart rate.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms
by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
DISPLAY
SPEED
Indicates how fast your walking or running surface is
moving.
PROBLEM: There is no heart rate reading.
SOLUTION: If you are using the chest strap, there may be a poor connection between the electrodes and the skin. Remoisten the electrodes with water.
The chest strap may not be positioned properly. Reposition the chest strap. It may
be necessary to experiment with the fit and position of the chest strap.
SOLUTION: Verify that the distance between the chest strap and the console is not beyond the
recommended range of 36 inches.
SOLUTION: The battery in the chest strap may be dead. Take the chest strap to a jewelry store
or return to Horizon Fitness for a battery replacement.
ELEVATION
Indicates the incline of your walking or running surface.
SOLUTION:
DISTANCE
Indicates the miles traveled during your workout.
PROBLEM: Erratic or inconsistent readout.
SOLUTION: This is often caused by dry electrodes or a loose chest strap. Moisture on the rubber electrodes is required for proper operation. Try a more generous coating of water on the electrodes and tightening the chest strap.
PULSE/LAPS
Indicates the number of times you have traveled around
the lap profile window. One lap equals ¼ of a mile.
Note: Pulse will be displayed if the heart rate handlebars are being used. The pulse reading is measured in
beats per minute.
If the above troubleshooting section does not remedy the
problem, discontinue use and turn the power off.
DO NOT RETURN TO THE STORE, PLEASE CONTACT THE HORIZON FITNESS
CUSTOMER ASSISTANCE CENTER;
TOLL FREE @ 1-888-993-3199.
29 HORIZON SERIES
CALORIES
Indicates the total number of calories burned during your
workout.
12 HORIZON T20
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 12
PROGRAMMING
COMMON PRODUCT QUESTIONS
CHOOSING THE TIME
Press SELECT and use the + or - buttons to set Time. Once the desired Time is selected, press the
START button. Select your desired speed using the + or - (speed) buttons.
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new treadmills. This noise will diminish over time, although may not totally go away. Over time, the
belt will stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I HAD DELIVERED LOUDER THAN THE ONE AT THE
STORE?
All fitness products seem quieter in a large store showroom because there is generally more background noise than in your home. Also, there will be less reverberation on a carpeted concrete floor
than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through
the floor. If a fitness product is placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder that a normal conversational tone of voice,
it is considered normal noise. If your treadmill is louder than this, you may want to call the Horizon
Fitness Customer Service Center @ 1.888.993.3199. Sometimes an initial diagnosis can be made
over the phone.
FINISHING A WORKOUT
When your workout is finished, the treadmill console will beep
twice and ‘END’ will be displayed in the Time window. Your
workout information will stay displayed on the console for 15
seconds before it will reset.
MAINTENANCE
DISPLAY
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
SELECT
We use sealed bearings throughout our treadmill so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the treadmill after each use.
Used to view alternate information such as
Speed, Pulse, Laps, Elevation, and Calories during your workout. Note: The console will automatically default back to show Time/Distance.
HOW DO I CLEAN MY TREADMILL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
TIME
Shown as Minutes:Seconds. View the time remaining
or the time elapsed in your workout.
11 HORIZON T20
30 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:56 PM
Page 11
GETTING STARTED
TENSIONING THE BELT
If you can feel a slipping sensation when running on the treadmill, the running belt must be tightened.
In most cases, the belt has stretched from use, causing the belt to slip. This is a normal and common
adjustment. To eliminate this slipping, tension both the rear roller bolts with the appropriate size allen
wrench, turning it 1/4 TURN to the right as shown. Try the treadmill again to check for slipping.
Repeat if necessary, but NEVER TURN the roller bolts more than 1/4 turn at a time. the belt tension
is set properly when the running belt is 1/4 of
an inch from the deck.
QUICK START UP
Simply press the Start button to begin exercising.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied Allen wrench to turn the right tension
bolt clockwise 1/4 turn at a time until the belt remains centered during use.
PAUSE
If the running belt is too far to the left side, turn the left tension bolt clockwise 1/4 turn at a time until
the belt remains centered during use.
RESET
Press the Stop button to pause your workout.
Press and hold the Stop button to reset the treadmill.
IF THE BELT IS TOO FAR TO THE LEFT
SIDE:
• Turn the left roller bolt 1/4 turn clockwise
(tighten).
IF THE BELT IS TOO FAR TO THE
RIGHT SIDE:
• Turn the right roller bolt 1/4 turn clockwise (tighten).
31 HORIZON SERIES
10 HORIZON T20
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 10
KNOW YOUR TREADMILL
MAINTENANCE PROCEDURES
TIPS
WATER BOTTLE
HOLDER
CONSOLE
GRIP PULSE HANDLEBARS
Cleanliness of your treadmill and its operating environment will keep maintenance problems and
service calls to a minimum. For this reason, Horizon Fitness recommends that the following preventive
maintenance schedule be followed.
AFTER EACH USE
Turn off the treadmill with the on/off switch, and unplug the power cord from the wall outlet.
TOUCH PAD
WARNING!
UPRIGHT
SUPPORT
To remove power from the treadmill, the power cord must be disconnected from the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use
solvents, as they can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become
pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other components on the treadmill by being misaligned.
MOTOR COVER
SIDE RAIL
ROLLER
END CAP
TRANSPORT WHEEL
EVERY WEEK
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
treadmill.
• Return the treadmill to its previous position.
RUNNING BELT
EVERY MONTH
• Inspect all assembly bolts of the machine for proper tightness.
EVERY YEAR
• It may be necessary to rewax your treadmill running deck and belt once a year to maintain optimal performance of your treadmill. Please contact Horizon Fitness with questions about applying wax
to your treadmill.
Warning! Only use paraffin wax provided by Horizon Fitness!
• Lubricate the air shocks with teflon based spray.
9 HORIZON T20
32 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 9
EXERCISE GUIDELINES
Always consult your physician before beginning an exercise program.
HOW OFTEN?
The American Heart Association recommends that you exercise at least 3 to 4 days per week to
maintain cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve
your goal faster with more frequent exercise. Whether it’s 3 days or 6 days, remember that your
ultimate goal should be to make exercise a lifetime habit. Many people are successful staying with
a fitness program if they set aside a specific time of day to exercise. It doesn’t matter whether it’s
in the morning before your shower, during lunch hour or while watching the evening news. What’s
more important is that it’s a time that allows you to keep a schedule, and a time when you won’t be
interrupted. If you are to be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the
next month!
HOW LONG?
LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill where you intend
to use it, raise or lower the adjustable levelers located on the treadmill base frame. Once you have
leveled the treadmill, lock the levelers in place by tightening the nuts against the frame. To assure
the treadmill is level, a carpenter's level is recommended. NOTE: For the Horizon T20 leveling is not
needed.
TURN POWER ON
Make sure that your treadmill is properly connected to a power outlet. The on/off switch is located next
to the power cord. Flip this switch to the 'on' position, so that the switch is lit. You will hear a beep and
the console will light up.
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 32
minutes per session. But start slowly and gradually increase your exercise times. If you’ve been
sedentary during the past year, it may be a good idea to keep your exercise times to as little as
five minutes initially. Your body will need time to adjust to the new activity. If your goal is weight loss,
a longer exercise session at lower intensities has been found to be most effective. A workout time of
48 minutes or more is recommended for best weight loss results.
HOW HARD?
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a
5K run, you will probably work out at a higher intensity than if your goal is general fitness.
Regardless of your long term goals, always begin an exercise program at low intensity. Aerobic
exercise does not have to be painful to be beneficial! There are two ways to measure your exercise
intensity. The first is by monitoring your heart rate, and the second is by evaluating your perceived
exertion level (this is simpler than it sounds!).
SAFETY KEY
Your treadmill will not start unless the safety key is placed on the safety key holder. Attach the clip
end securely to your clothing. This safety key is designed to cut the power to the treadmill if you
should fall. NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT COME OFF YOUR CLOTHING.
PERCEIVED EXERTION LEVEL
The second and simpler way to gauge your exercise intensity is to evaluate your perceived exertion
level. While exercising if you are too winded to maintain a conversation without gasping, you are
working out too hard. A good rule of thumb is to work to the point of exhilaration, not exhaustion.
If you cannot catch your breath, it’s time to slow down. Always be aware of other warning signs of
overexertion.
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt. Place your feet on the side
rails before starting the treadmill. Start walking on the belt only after the belt has begun to move.
Never start the treadmill at a fast running speed and attempt to jump on!
33 HORIZON SERIES
8 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 8
FOLDING
Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill deck to the upright
position until the foot lock latch engages and securely locks the deck into position. Make sure the deck
is securely latched before letting go. To unfold, firmly grasp the back end of the treadmill. Gently
press down on the foot lock latch with your foot until the lock latch disengages. Carefully lower the
deck to the ground. NOTE: on the T20 model the foot lock latch might be on the right hand side.
DEVELOPING A FITNESS PROGRAM
TIPS
STRETCH FIRST
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury.
Ease into each of these stretches with a slow gentle motion. Do not stretch to the point of pain.
Make sure not to bounce while doing these stretches.
WALL PUSH
FOOT LOCK-LATCH
Stand near a wall with the toes of one foot about 18" from the wall, and the other foot about 12"
behind the other foot. Lean forward, pushing against the wall with your palms. Keep your heels flat
and hold this position for a count of 15 seconds. Make sure that you do not bounce while stretching.
Alternate positions of your feet and repeat for a total of 8 repetitions.
STANDING QUADRICEPS STRETCH
MOVING
Your treadmill has a pair of transport wheels built into the base frame. To move, make sure the treadmill is folded and securely latched. Then firmly grasp the handlebars, tilt the treadmill back and roll.
CAUTION! Our Treadmills are heavy, use care and additional help if necessary when moving. Do not
attempt to move or transport treadmill unless it is in upright, folded position with the lock latch
secured. Failure to follow these instructions could result in injury.
Using a wall to provide balance, grasp your left ankle with your left hand and hold your foot against
the back of your thigh for a count of 15 seconds. Repeat with your right ankle and hand, and continue alternating for a total of 8 repetitions.
SEATED TOE TOUCH
Sit on the floor with your legs together and straight out in front of you. Do not lock your knees. Extend
your fingers towards your toes and hold for a count of 15 seconds. Make sure that you do not bounce
while stretching. Sit upright again. Repeat for a total of 8 repetitions.
THE IMPORTANCE OF WARM
UP AND COOL DOWN
WARM UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your Horizon
Fitness product at a slow pace.
COOL DOWN
Never stop exercising suddenly! A cool-down period allows your heart to readjust to the decreased
demand. Make sure that your cool down period consists of a very slow pace to allow your heart rate
to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
7 HORIZON SERIES
34 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 7
ACHIEVING YOUR FITNESS GOALS
Before proceeding, find your treadmill’s serial number and model name located to the left of
the on/off power switch and power cord and enter it in the space provided below:
SERIAL NUMBER AND MODEL NAME LOCATION:
An important step in developing a long term fitness program is to determine your goals. Is your primary goal for exercising on your treadmill to lose weight? Improve muscle? Burn Stress? Prepare for
the spring racing schedule? Knowing what your goals are will help you develop a more successful
exercise program. Below are some common exercise goals:
•
•
•
•
•
Weight Loss
Improve Body Shape and Tone
Increased Energy Level
Improved Sports Performance
Improved Cardiovascular Endurance
•
•
•
•
Weight Maintenance
Strengthen Leg Muscles
Improved Sleep Patterns
Stress Reduction
If possible try to define your personal goals in precise, measurable terms, and then put your goals
in writing. The more specific you can be, the easier it will be to track your progress. If your goals are
long term, divide them up into monthly and weekly segments. Longer term goals can lose some of the
immediate motivation benefits. Short term goals are easier to achieve. Your treadmill console provides you with several readouts that can be used to record your progress. You can track Distance,
Calories or Time. Time is the most important and useful of test functions.
ENTER YOUR SERIAL NUMBER IN BOX BELOW:
KEEPING AN EXERCISE DAIRY
Photocopy the weekly and monthly log sheets on the following pages to make your personal exercise log book. As time goes by you’ll be able to look back with pride at the work you’ve done. As
your fitness improves, you can look back and see how far you’ve come.
Refer to this number when calling for service, and also enter this serial number on your
Warranty Card and in your own records. Be sure to read the Safety Instructions and complete
Owner’s Guide before using your new treadmill.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to Horizon Fitness within thirty days of purchase or registered on line at www.horizonfitness.com, before a warranty claim can be processed. Please keep receipt
with owner’s guide as it may be required for a warranty claim. Make sure to send in warranty registration card to validate your warranty.
35 HORIZON SERIES
6 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 6
CONGRATULATIONS! on choosing a Horizon Series treadmill.
You’ve taken an important step in developing and sustaining an exercise program! Your treadmill is
a tremendously effective tool for achieving your personal fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
WEEKLY LOG SHEET
Here are just a few of the health benefits of aerobic exercise:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
• Reduced Stress
• Help In Countering Anxiety
and Depression
• An Improved Self Image
The key to reaping these benefits is to develop the exercise habit. Your new treadmill will help you
eliminate the obstacles that prevent you from getting in your exercise time. Inclement weather and
darkness won't interfere with your workout when you use your treadmill in the comfort of your home.
This manual provides you with basic information for using and enjoying your new machine. A more
complete knowledge of your new treadmill will assist you in realizing your goal of a healthy lifestyle.
!
CAUTION
CAUTION: BEFORE BEGINNING ANY EXERCISE PROGRAM, ALWAYS CONSULT YOUR PHYSICIAN. IF YOU EXPERIENCE CHEST PAINS, NAUSEA, DIZZINESS OR SHORTNESS OF BREATH,
STOP EXERCISING AND CONSULT YOUR PHYSICIAN BEFORE CONTINUING.
IMPORTANT: PLEASE READ BEFORE USE!
ASSEMBLY
CAUTION! There are several areas during the assembly process of a treadmill that special attention
must be paid. It is very important to follow the assembly instructions correctly and to make sure all
parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could
have frame parts that are not tightened and will seem loose and may cause irritating noises. There
should be no side-to-side play in the console masts or any forward and back play in the console
assembly or handlebars. If there is any play in these areas, the treadmill has not been properly
assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.
5 HORIZON SERIES
36 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 5
MONTHLY LOG SHEET
WARNING
WARNING!
To reduce the risk of burns, fire, electrical shock or injury to persons:
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop
exercising immediately and consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Keep power cord away from heated surfaces.
• Keep children off of treadmill at all times.
• Do not use treadmill outdoors.
• Unplug treadmill before moving it.
• Do not remove the treadmill motor covers or roller covers. Service should be
performed only by an authorized Horizon Fitness service provider.
• Treadmill should be plugged into a dedicated 20amp circuit.
• At no time should more than one person be on treadmill while in operation.
CHILDREN
• Keep children off your Treadmill at all times.
• When the Treadmill is in use, young children and pets should be kept at least
10 feet away.
CLEANING
• Clean with soap and slightly damp cloth only; never use solvents.
OTHER SAFETY TIPS FOR YOUR HORIZON FITNESS TREADMILL
!
CAUTION
CAUTION!
If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.
• Do not wear clothing that might catch on any part of the Treadmill.
• Read this Owner’s Guide before operating this Treadmill.
OPERATION
To reduce the risk of damaging important components on your treadmill, it is strongly recommended
that your treadmill is plugged into a dedicated 20amp outlet, without the use of an additional
extension cord.
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill
has been exposed to colder temperatures or high moisture climates, it is strongly recommended that
the treadmill is warmed up to room temperature before first time use. Failure to do so may cause
premature electronic failure.
37 HORIZON SERIES
4 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 4
LIMITED HOME USE WARRANTY
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this Treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill
T20
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the
original owner.
WARNING!
Connect this exercise product to a properly grounded outlet only.
See grounding instructions.
DRIVE MOTOR • 25 YEARS
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides
a path of least resistance for electrical current to reduce the risk of electrical shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with local codes and ordinances.
DANGER!
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Horizon Fitness warrants the drive motor against defects in workmanship and materials for a period of
ten years from the date of purchase, so long as the device remains in the possession of the original owner.
ELEVATION MOTOR • 25 YEARS
Horizon Fitness warrants the elevation motor against defects in workmanship and materials for a period
of ten years from the date of purchase, so long as the device remains in the possession of the original
owner.
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic components, finish and all original parts for a period of one year
from the date of original purchase, so long as the device remains in the possession of the original owner.
LABOR • 90 DAYS
Horizon Fitness shall cover the labor cost for the repair of the device for a period of ninety days from the
date of the original purchase, so long as the device remains in the possession of the original owner.
EXCLUSIONS AND LIMITATIONS
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated below. A temporary adapter such as the one illustrated below may be used to connect this
plug to a 2-pole receptacle as shown, if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected
to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is
used, it must be held in place by a metal screw.
3-POLE
GROUNDED
OUTLET
2-POLE
OUTLET IN
GROUNDED BOX
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective frame, motor, electronic component, or defective part and
is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the
Treadmill as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion,
discoloration of paint or plastic, or neglect. Horizon Fitness shall not be responsible for incidental or consequential damages. All returns must be pre-authorized by Horizon Fitness. Horizon Fitness’ obligation
under this warranty is limited to replacing or repairing, at Horizon Fitness’ option, the product at one of
its authorized service centers. An Horizon Fitness authorized service center must receive all products for
which a warranty claim is made. These products must be received with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. Parts and electronic components
reconditioned to As New Condition by Horizon Fitness or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms. This warranty gives you specific legal
rights, and your rights may vary from state to state.
ADAPTER
GROUNDED TREADMILL
POWER CORD
METAL
GROUNDING
SCREW
3 HORIZON SERIES
38 HORIZON SERIES
horizon T20, 30, 40 owner’s guidev1.0.qxd
7/5/2003
2:55 PM
Page 3
LIMITED HOME USE WARRANTY
T30 & T40
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the
original owner.
DRIVE MOTOR • 10 YEARS
Horizon Fitness warrants the drive motor against defects in workmanship and materials for a period of
ten years from the date of purchase, so long as the device remains in the possession of the original owner.
ELEVATION MOTOR • 10 YEARS
Horizon Fitness warrants the elevation motor against defects in workmanship and materials for a period
of ten years from the date of purchase, so long as the device remains in the possession of the original
owner.
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic components, finish and all original parts for a period of one year
from the date of original purchase, so long as the device remains in the possession of the original owner.
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost for the repair of the device for a period of one year from the
date of the original purchase, so long as the device remains in the possession of the original owner.
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective frame, motor, electronic component, or defective part and
is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the
Treadmill as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion,
discoloration of paint or plastic, or neglect. Horizon Fitness shall not be responsible for incidental or consequential damages. All returns must be pre-authorized by Horizon Fitness. Horizon Fitness’ obligation
under this warranty is limited to replacing or repairing, at Horizon Fitness’ option, the product at one of
its authorized service centers. An Horizon Fitness authorized service center must receive all products for
which a warranty claim is made. These products must be received with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. Parts and electronic components
reconditioned to As New Condition by Horizon Fitness or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms. This warranty gives you specific
legal rights, and your rights may vary from state to state.
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
FOLDING & MOVING
LEVELING, POWER & EMERGENCY STOP
KNOW YOUR TREADMILL (Horizon T20)
3
7
8
9
GETTING STARTED (Horizon T20)
PROGRAMMING/DISPLAY (Horizon T20)
KNOW YOUR TREADMILL
(Horizon T30, T40)
GETTING STARTED (Horizon T30, T40)
DISPLAY (Horizon T30, T40)
PROGRAM PROFILES
USING YOUR RACE PROGRAM
USING YOUR PULSE ZoneTM PROGRAM
USING YOUR ADVENTURE PROGRAM
TROUBLESHOOTING
COMMON QUESTIONS
MAINTENANCE PROCEDURES
EXERCISE GUIDELINES
10
11
13
14
18
19
24
25
27
28
30
32
33
DEVELOPING A FITNESS PROGRAM
& IMPORTANCE OF WARM UP/ COOL DOWN
FITNESS GOALS
WEEKLY LOG SHEETS
MONTHLY LOG SHEETS
LIMITED HOME USE WARRANTY
(Horizon T20)
LIMITED HOME USE WARRANTY
(Horizon T30, T40)
!
CAUTION
34
35
36
37
38
39
CAUTION
Read all precautions and instructions in this manual before using this equipment.
Save this manual for future reference.
39 HORIZON SERIES
2 HORIZON SERIES
7/5/2003
2:55 PM
Page 1
Designed for life.TM
HORIZON FITNESS
800 BURTON BOULEVARD
DEFOREST, WISCONSIN 53532
phone 1.888.993.3199 fax 1.608.842.1660
www.horizonfitness.com
Rev. 1.1
TREADMILL
horizon T20, 30, 40 owner’s guidev1.0.qxd
HORIZON T20
HORIZON T30
HORIZON T40
Owner’s Guide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement