cover copy copy - Infilink Technologies

cover copy copy - Infilink Technologies
...Infinite Ways to Link...
Infilink Technologies is the ONLY one-stop
medium
size
network
solutions
manufacturer
offering complete line of Structurd Cabling Fiber
and Copper Solutions suited for SMB LAN
environments. Additionally, Infilink Technologies
carries a full range of cabinets and termination tools
Infilink Technologies as your professional
partner offers 25 Year Performance
Warranty directly to the end user, not to the
independent system integrator or network
specialist who happens to installs the
network for you.
This warranty distinguishes Infilink in the
rapidly growing market.
for any customer requirements. Our design,
development, marketing and management team
works in close collaboration to ensure optimal
products. These products will not only suit regional
requirements,
but
also
meet
and
exceed
well-recognized international standards such as
ISO, IEC, TIA, with solutions encompassing OS2,
OM2 and OM3 for fiber and Cat.3 to Cat.6A in UTP
and shielded varieties for copper production lines.
The 25-Year Warranty applies to premise
cabling installations consisting of 100
percent Infilink Products or Infilink
approved products. Systems must be
installed by authorized contractors and
registered with Infilink.
For further details, please ask for a copy
of the Infilink warranty statement.
All Infilink Technologies products are available
through an extensive network of regional and
territorial partners in each continent. The 25-year
end-to-end installation certificate offered by Infilink
Certified Installers, brings customer satisfaction
and ease of mind for many years to come.
TRADEMARK STATEMENT
Infilink and the Inflink logo are registered trademarks of Infilink Technologies, U.S.A.
CUSTOMER SUPPORT
Infilink Customer Support Services offers a broad selection of programs including extended phone
support, upgrades, and parts replacement. For more information, contact us by email on
[email protected]filinktechnologies.com. Service and availability may vary by country.
INFILINK TECHNOLOGIES
San Rafael, California, U.S.A.
Telephone : +1 (415) 482-6681
Email: [email protected]filinkTechnologies.com
www.InfilinkTechnologies.com
All rights reserved
Table of Content
Company Profile
5
Voice-Telephone System (Cat-3 Multipair)
Cat-3 UTP 25Pair/50Pair/100Pair Telephone Cable
Cat-3 25 port /50port Voice Patch Panel
6
7
Connectors and Outlets
Shielded & Unshielded Cat-5e Cat-6 Cat-6A Keystone Jack Modules
RJ45 Male Plug
Boot Cover
Faceplates: British Style
Faceplates: French & British Style
Surface Box
8
15
15
16
18
Copper Unshielded Twisted Pair Cables
Green UTP Cable e-Series (Gigabit)
Cat-5e UTP PVC cable (Giga Ready)
Cat-6 UTP PVC cable (Thunder Series)
19
20
21
Copper Shielded Twisted Pair Cables
Cat-5e SFTP LSZH Cable
Cat-6 SFTP LSZH Cable
Cat-6A FFTP Cable
22
23
24
Copper Patch Cord Assemblies
Cat-5e UTP Patch Cords
Cat-6 Shielded & Unshielded Patch Cords
Cat-6A Shielded Patch Cords
25
26
28
Copper Patch Panels
Cat-5e Shielded & Unshielded Patch Panel
Cat-6 Shielded & Unshielded Patch Panel
Cat-6A Shielded Patch Panel
Unloaded 16 port Patch Panel
29
31
33
34
Fiber Optic Cables (OM2, OM3, OS1)
FTTH
2 Core Indoor Single Mode LSZH
2 Core Outdoor Single Mode PE
2 Core Indoor Multimode Zipcord
35
36
37
Tight Buffered
4 - 48 Core Indoor SM & MM LSZH
38
Loose Tube
2 - 12 Core Indoor & Outdoor SM & MM
2 - 12 Core Outdoor SM & MM Steel Wire Armored
24 Core Outdoor SM & MM Steel Tape
2 - 144 Core Outdoor SM & MM Double Armored With Two Jackets
39
40
41
42
Table of Content
Fiber Optic Accessories
Connectors
Adapters
43
44
Fiber Optics Cable Assemblies
Patch cords
Pigtails
45
46
Fiber Optic Patch Panels and Enclosures
Rack mount 19" Fiber Optic Patch Panels Sliding Type Loaded
(SM & MM) & Unloaded
Simplex (LC, SC, SC/APC) 12, 24, 48, 96 ports
Duplex (LC, SC, SC/APC) 12, 24, 48, 96 ports
47
47
47
Networking Cabinets & Cable Accessories
19" Free Standing Cabinets
19" Wall Mounted Cabinets
Cable Manager
Cage Nuts, Castors, Fixed & Movable Trays, Fan
Power Distribution Units
48
48
49
49
49
Data Center Solutions
MPO Cassettes
MPO Trunk & Fanout Cable / Patch Cord
MPO Patch Panel
50
51
52
Tools
Crimping Tool
Punch Down Tool
Glossary
53
53
54
Company
Profile
Voice-Telephone
System
Company Profile
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Data Center
Solutions
Tools
Connectors
Adapters
Patch Cord Assemblies
Pigtails
Indoor & Outdoor cables
Patch Panels
MPO solutions
5
Glossary
www.InfilinkTechnologies.com
Fiber Optics
Cable assemblies
•
•
•
•
•
•
•
Fiber Optic
Accessories
In order to achieve quicker and better development, and to comply with the flourishing situation
in the or communications industry, Infilink now is entering into the field of optical fiber communications and FTTH hoping to inject fresh blood into this field which composed of the following
components:
Fiber Optic Cables
(OM2, OM3, OS1)
The product line:
Infilink Technologies offer high quality structured cabling & Data Center solutions with warranty
according to the budget of the client in projects.
Copper Patch
Panels
Design and product capabilities:
The company also has manufacturing agreements with several world-renowned fiber manufacturers with very high annual production capacity. Infilink Technologies products are obtained
by various Telecommunication Companies and Service Providers, Structured Cabling Installation Companies and Large Distributors.
Copper Cable
Assemblies
Quality:
Infilink Technologies’s Quality Assurance Management Team understands the importance of
component quality in the Telecommunications and Data sectors. The 25-year knowledge
enables Infilink members to optimize the design criteria such that performance and quality are
maintained at highly justifiable and economical prices.
Copper Shielded
Twisted Pair
Cables
Manufacturing:
Infilink Technologies headquarters is centrally located in Northern California with production
facilities in both Taiwan and China. Our manufacturing facilities have passed all well known
International Standards and carry certificates such as 3P, DELTA, UL, CE, ETL, TIA and RoHS.
Copper UTP
Cables
The company dedicates extensive time and effort to R&D as well as production of high quality
components by utilizing advanced test and inspection of components, in addition to adhering to
strict quality management systems. With the goal of giving customers high-quality products and
unparalleled service, product development and technological innovation are always our focus.
Connectors and
Outlets
Infilink Technologies is a manufacturer of Copper and Fiber Structured Cabling Solutions for
the LAN and MAN environments and within the Telecommunications and Data sectors. Founded
in 1998 to address Structured Cabling requirements within Data and Telecommunications
sectors, the company has now grown into a multinational group with a vast global customer
network. With the honesty, diligence, solidarity and creativity, the company’s leaders have
gathered a group of highly qualified and efficient professionals to design, develop, and manufacture Structured Cabling Solutions to meet the current and future trends of Data and Telecommunication sector.
Cat-3 UTP Multi Pair
Telephone Cable
Infilink Cat-3 Multipair Cable supports LAN applications
utilizing bandwidth up to 16MHz, Ethernet for Telephone
system wiring which is mandatory minimum cable
specified by the FCC for new home constructions in order
to ensure broad band capabilities.
Multipair Voice Cat-3
Color
: Gray, Ivory, White
Package
: Wooden Drums
Description
: Infilink Cat-3
UTP 25, 50, 100 Pairs
indoor cable 305m/Roll
PE insulation
PVC jacket
Key Features
•
•
•
Tested from 1 to 16 MHz
Component Compliant to TIA
category 3 cable requirements
Applications: 10 Base-Token Ring
4/16 Mbps to 25.6 Mbps ATM
Companion Products
Consider these related Infilink
products in your network planning
•
•
Infilink Cat-3 Patch Panels 25,
50 Ports (Voice)
Infilink Punch Down Tool
Outer Jacket
PE Tape
Insulation
Conductor
CONSTRUCTION
1
CONDUCTOR
Annealed copper wire diameter 0.495±0.008 mm
2
INSULATION
Solid polyethylene diameter 0.86±0.02 mm
3
PAIRS
Color code:
____________________________________________________________________________________
PAIR 1 BLUE-WHITE
PAIR 10 GREY-RED
PAIR 19 BROWN-YELLOW
_____________________________________________________________________________________
PAIR 2 ORANGE-WHITE PAIR 11 BLUE-BLACK
PAIR 20 GREY-YELLOW
_____________________________________________________________________________________
PAIR 3 GREEN-WHITE
PAIR 12 ORANGE-BLACK PAIR 21 BLUE-PURPLE
_____________________________________________________________________________________
PAIR 4 BROWN-WHITE PAIR 13 GREEN-BLACK
PAIR 22 ORANGE-PURPLE
_____________________________________________________________________________________
PAIR 5 GREY-WHITE
PAIR 14 BROWN-BLACK
PAIR 23 GREEN-PURPLE
_____________________________________________________________________________________
PAIR 6 BLUE-RED
PAIR 15 GREY-BLACK
PAIR 24 BROWN-PURPLE
_____________________________________________________________________________________
PAIR 7 ORANGE-RED
PAIR 16 BLUE-YELLOW
PAIR 25 GREY-PURPLE
_____________________________________________________________________________________
PAIR 8 GREEN-RED
PAIR 17 ORANGE-YELLOW
_____________________________________________________________________________________
PAIR 9 BROWN-RED
PAIR 18 GREEN-YELLOW
4
OUTER JACKET RIPCORD
PVC compound Thickness 0.6 mm Minimum
External diameter 13±0.3 mm
ORDER CODES
Infilink – UTP Cat-3 Solid 25 Pair Cable
IP-CU3P25
_____________________________________________________________________________________
Infilink – UTP Cat-3 Solid 50 Pair Cable
IP-CU3P50
_____________________________________________________________________________________
Infilink – UTP Cat-3 Solid 100 Pair Cable
IP-CU3P100
6
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-3 25 & 50 Port Voice
Patch Panel
Connectors and
Outlets
Infilink Category 3 range of patch panels offer
exceptional performance within a very high density
format. Its unique design gives full 25 & 50 category 3
ports in a single U rack space.
Copper UTP
Cables
It provides flexibility, simplicity and fast installation of
patch panel. Each patch panel has its own rear cable
manager allowing superior support and protection for the
cables.
Copper Shielded
Twisted Pair
Cables
6.5±0.2
PERFORMANCE
Companion Products
Consider these related Infilink
products in your network planning
Infilink Cat-3 Multipair Cable
Infilink Punch Down Tool
Data Center
Solutions
•
•
Insertion force
: 20N max (IEC 6063-7-4)
_______________________________________________________________________________
Durability
: 750 cycles
_______________________________________________________________________________
Conductor Compatibility
: 22 ~ 26 AWG stranded and solid wire, compatible with
Krone punch down tool.
_______________________________________________________________________________
Operating temperature
: -10 ~ 60ºC (ISO/IEC 11801, ANSI/TIA 568 B.2)
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
•
Fiber Optics
Cable assemblies
•
•
Allow easy circuit identification
using the Infilink labeling
Integral rear cable management
In full Compliance with Cat-3
Performance standards
Fits to any Standard 19” rack
Extended Warranty
Panel
: SPCC 1.2mm thickness with Black (RAL9005) color painted
_______________________________________________________________________________
RJ45 Jack Housing
: PBT + Fiber Glass (UL94V-0)
_______________________________________________________________________________
RJ45 Jack Contact Bracket : PBT + Fiber Glass (UL94V-0)
_______________________________________________________________________________
Spring wire
: Phosphor Bronze with Nickel plated + Gold Flush on plug
contact area
_______________________________________________________________________________
IDC housing
: PC + Fiber Glass (UL94V-2)
_______________________________________________________________________________
IDC terminal
: Phosphor Bronze with Tin plated.
_________________________________________________________________________________
PCB
: CEM-1, UL94V-0
Fiber Optic
Accessories
•
MATERIAL
Fiber Optic Cables
(OM2, OM3, OS1)
Key Features
Copper Patch
Panels
11.5±0.2
Copper Cable
Assemblies
19 Inch (482.6±0.3mm)
464.8±0.2
31.75±0.20
44.0±0.2
Produced within Infilink production facilities under strict
quality standards, it offers end users a perfect
combination of price, performance and quality.
Tools
ORDER CODES
Infilink- 25 port Cat-3 Patch Panel UTP RJ-45
IP-PP325
_______________________________________________________________________________
Infilink- 50 port Cat-3 Patch Panel UTP RJ-45
IP-PP350
7
Glossary
www.InfilinkTechnologies.com
Cat-5e Keystone Jack Module
The affordable and high performance keystone jacks
for home and office use that require a termination tool.
The Infilink eight-position modular jack offers enhanced
performance at both component and channel levels.
Additionally, to simplify installation and increase flexibility,
the jack enables universal termination in either the T568A
or T568B wiring pattern without field installation of labels.
The Infilink Keystone jack can be terminated with any
110-style punch down tool.
Key Features
•
•
•
Fits any Standard Face Plate
Full Cat-5e Performance
Extended Warranty
Companion Products
Consider these related Infilink
products in your network planning
•
•
•
•
•
•
•
•
•
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink Cat-5e Connectivity
Infilink Punch Down Tool
SPECIFICATIONS
PERFORMANCE
PHYSICAL
Housing and insert materials: PC UL 94V-0
MECHANICAL
_____________________________________________________________________________________
• Plug insertion life
750 Cycles
_____________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
_____________________________________________________________________________________
• Plug retention force
30 lbs minimum
_____________________________________________________________________________________
• Wire
AWG 24~26
_____________________________________________________________________________________
• Temperature (Storage)
-40ºC to 85ºC
_____________________________________________________________________________________
• Temperature (operation))
0ºC to 70ºC
ELECTRICAL
_____________________________________________________________________________________
• Current Rating
1.5 Amps
_____________________________________________________________________________________
• Voltage Rating
125 VAC RMS
_____________________________________________________________________________________
• Insulation Resistance
1,000 Mega-Ohm [email protected] 500 VDC
_____________________________________________________________________________________
• Contact Resistance
100 Milli-ohm maximum
_____________________________________________________________________________________
• DIELECTRIC strength
750 VAC RMS 60Hz, I Min.
_____________________________________________________________________________________
• Transmission performance
100 Mbps
STANDARDS
_____________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• TIA/EIA
568-B.2 (Category 5 transmission performance)
ORDER CODES
Infilink-Keystone Cat-5e, Unshielded, 8P8C,
8
IP-KS51
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-5e Tool-less
Keystone Jack Module
Connectors and
Outlets
Infilink eight-position modular jack offers enhanced
performance at both component and channel levels. This
modular jack offers 45 dB Next and 42 dB Power-SUM
Next at 100 Mhz. Additionally, to simplify installation and
to offer increased flexibility the jack allows for universal
termination in either the T568A or T568B wiring pattern
without field installation of labels. The jack also offers an
alternate termination method to traditional 110-style
punch downs. A hinged stuffer cap provides the means
to lace and press the wire pairs prior to termination.
Once the pairs are properly placed and trimmed, the
stuffer cap is snapped onto the jack terminals using
common pliers. This termination technique provides
consistently high performance levels from jack to jack.
The tool less jack eliminates the need for a specialized
punch down tool.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
No Termination Tools required
Fits any Standard Face Plate
Full Cat-5e Performance
Extended Warranty
Consider these related Infilink
products in your network planning
MECHANICAL
_____________________________________________________________________________________
• Plug insertion life
750 Cycles
_____________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
_____________________________________________________________________________________
• Plug retention force
30 lbs minimum
_____________________________________________________________________________________
• Temperature
-40ºC to 68ºC
ELECTRICAL
_____________________________________________________________________________________
• Current Rating
1.5 Amps
_____________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
_____________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
_____________________________________________________________________________________
• Transmission performance
100 Mbps
STANDARDS
_____________________________________________________________________________________
• UL
UL Certified
_____________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• TIA/EIA
568-B.2 (Category 5 transmission performance)
Tools
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink Cat-6 Connectivity
High Impact flame retardant plastic, UL 94V-0
rated, 50 micro inch gold over 100 micron inch
ORDER CODES
Infilink-Keystone Cat-5e, Unshielded, 8P8C, Tool Less
9
IP-KS51-W1
Glossary
www.InfilinkTechnologies.com
Data Center
Solutions
•
•
•
•
•
•
•
•
PHYSICAL
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-6 Tool-less Keystone
Jack Module
The affordable and high performance keystone jacks
for home and office use that require no termination
tools
The Infilink eight-position modular jack offers enhanced
performance at both component and channel levels.
Additionally, to simplify installation and to offer increased
flexibility the jack allows for universal termination in either
the T568A or T568B wiring pattern without field
installation of labels. The jack also offers an alternate
termination method to traditional 110-style punch downs.
A hinged stuffer cap provides the means to lace and press
the wire pairs prior to termination. Once the pairs are
properly placed and trimmed, the stuffer cap is snapped
onto the jack terminals using common pliers. This
termination technique provides consistently high
performance levels from jack to jack. The tool less jack
eliminates the need for a specialized punch down tool.
Key Features
•
•
•
•
No Termination Tools required
Fits any Standard Face Plate
Full Cat-6 Performance
Extended Warranty
Companion Products
Consider these related Infilink
products in your network planning
•
•
•
•
•
•
Infilink Patch Panels
Infilink Cat-6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
SPECIFICATIONS
PERFORMANCE
PHYSICAL
High Impact flame retardant plastic, UL 94V-0
rated, 60 micro inch gold over 110 micron inch
MECHANICAL
_____________________________________________________________________________________
• Plug insertion life
750 Cycles
_____________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
_____________________________________________________________________________________
• Plug retention force
30 lbs minimum
_____________________________________________________________________________________
• Temperature
-40ºC to 68ºC
ELECTRICAL
_____________________________________________________________________________________
• Current Rating
1.5 Amps
_____________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
_____________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
_____________________________________________________________________________________
• Transmission performance
1000 Mbps
STANDARDS
_____________________________________________________________________________________
• UL
UL Verified
_____________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• TIA/EIA
568-B.2-1 (Category 6 transmission performance)
ORDER CODES
Infilink-Keystone Cat-6, Unshielded, 8P8C, Tool Less
32
10
IP-KS6-W1
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6 Tooled Keystone
Jack Module
Connectors and
Outlets
The Infilink eight-position modular jack offers enhanced
performance at both component and channel levels.
Additionally, to simplify installation and increase flexibility,
the jack allows for universal termination in either the
T568A or T568B wiring pattern without field installation of
labels. The jack offers termination method to traditional
110-style punch downs. A hinged stuffer cap provides
the means to lace and press the wire pairs prior to
terminating them. Once the pairs are properly placed, by
using any 110 punch down tool, you can terminate each
of the eight positions of wires one by one. Infilink
recommends using an Infilink punch down (IP-PD001)
for termination of this type of Infilink Keystone Jack.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
Fits any Standard Face Plate
Full Cat-6 Performance
Extended Warranty
1000 BASE-TX, 100BASE-T,
10 BASE-T, 155M ATM, POE
Consider these related Infilink
products in your network planning
MECHANICAL
_____________________________________________________________________________________
• Plug insertion life
750 Cycles
_____________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
_____________________________________________________________________________________
• Plug retention force
30 lbs minimum
_____________________________________________________________________________________
o
o
• Temperature
-10 C to 60 C
ELECTRICAL
_____________________________________________________________________________________
• Current Rating
1.5 Amps
_____________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
_____________________________________________________________________________________
• Contact Resistance
20 Milli-Ohm maximum
_____________________________________________________________________________________
• Transmission performance
1000 Mbps
STANDARDS
_____________________________________________________________________________________
• UL
UL Verified
_____________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• TIA/EIA
568-B.2-1 (Category 6 transmission performance)
• ISO/IEC
11801 2nd edition
Tools
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink Punch Down Tool
High Impact flame retardant plastic, UL 94V-0
rated, RoHS compliant 60 micro inch gold over
110 micron inch lead free
ORDER CODES
Infilink-Keystone Cat-6, Unshielded, 8P8C, Tool Less
11
5
IP-KS6
Glossary
www.InfilinkTechnologies.com
Data Center
Solutions
•
•
•
•
•
•
•
•
PHYSICAL
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-6 Tooled Keystone Jack 180o
The Infilink eight-position 180º modular jack offers
enhanced performance at both component and channel
levels, specifically in environments with space constraints
and limitations. Additionally, to simplify installation and
increase flexibility, the jack allows for universal
termination in either the T568A or T568B wiring pattern
without field installation of labels. The jack offers an
alternate termination method to traditional 110-style
punch downs. A hinged stuffer cap provides the means to
lace and press the wire pairs prior to terminating them.
Once the pairs are properly placed, by using any 110
punch down tool, you can terminate each of eight
positions of wires one by one. Infilink recommends using
an Infilink punch down tool (IP-PD001) for terminating
this type of Infilink Keystone Jack.
Key Features
•
•
•
•
Fits any Standard Face Plate
Full Cat-6 Performance
Extended Warranty
1000 BASE-TX, 100BASE-T, 10
BASE-T, 155M ATM, POE
Companion Products
Consider these related Infilink
products in your network planning
•
•
•
•
•
•
•
•
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink Punch Down Tool
SPECIFICATIONS
PERFORMANCE
PHYSICAL
High Impact flame retardant plastic, UL 94V-0 rated,
60 micro inch gold over 110 micron inch Lead free
MECHANICAL
_____________________________________________________________________________________
750 Cycles Minimum
• Plug insertion life
_____________________________________________________________________________________
100 grams min, using FCC approved plug
• Plug and Jack contact force
_____________________________________________________________________________________
30 lbs minimum
• Plug retention force
_____________________________________________________________________________________
-10oC to 60oC
• Temperature
ELECTRICAL
_____________________________________________________________________________________
• Current Rating
1.5 Amps
_____________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum at 100 V DC
_____________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
_____________________________________________________________________________________
• Transmission performance
1000 Mbps
STANDARDS
_____________________________________________________________________________________
• UL
UL Verified
_____________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• TIA/EIA
568-C.2 (Category 6 transmission performance)
_____________________________________________________________________________________
• ISO/IEC
11801 2nd edition
ORDER CODES
Infilink-Keystone Cat-6, Unshielded, 8P8C, Tooled 180o
12
IP-KS6-180
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6 FTP Keystone
Jack Module
Connectors and
Outlets
Infilink Shielded Solutions are ideal for industries where
interference is more common or data security is critical.
With shielding, internal data signals are securely
contained, and isolated from Electro Magnetic
Interference (EMI) and Radio Frequency Interference (RFI).
The modular solution of Infilink shielded solution not only
provides flexibility to the installer, but also drastically
shortens termination time. Applicable for horizontal
network and voice application in a structured cabling
system, including digital video, broadband & baseband
analog video. The Infilink fully Shielded keystone jack
offers enhanced performance at both component and
channel levels. Additionally, to simplify installation and to
offer increased flexibility the jack enables universal
termination in either the T568A or T568B wiring pattern.
The jack offers termination method of traditional 110-style
and Krone punch downs.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
Standard Verification
•
•
TIA/EIA-568-C.2
FCC part 68, Subpart F
Amendment 1 to ISO/IEC
11801, 2nd Ed.
EN 50173:2007
UL 1863
Electrical Characteristics
• Interface Resistance: 20mΩ
_____________________________________________________________________________________
• Resistance: >100MΩ
_____________________________________________________________________________________
• Initial Contact Resistance: 2.5mΩ Insulation
_____________________________________________________________________________________
• Minimum back box requirement: 44mm
IDC Connector
• Housing: Polycarbonate, UL94V-0 rated
_____________________________________________________________________________________
• IDC Contact Plating: Tin Matte Finish
_____________________________________________________________________________________
• Operating Life: Minimum 20 reterminations
_____________________________________________________________________________________
• Contact Force: 100g minimum
_____________________________________________________________________________________
• Contact Material: Copper Alloy
_____________________________________________________________________________________
• Wire Accommodation: 23 AWG solid
Data Center
Solutions
•
•
•
Mechanical Characteristics
• Housing: Zinc Alloy plated Bright Ni/Cu
Connector
Contact Material: Copper Alloy
_____________________________________________________________________________________
• Contact Plating: 1.25 micrometers Au/Ni
_____________________________________________________________________________________
• Operating Life: Minimum 750 insertion cycles
Contact Force: 100g minimum
_____________________________________________________________________________________
• Plug Retention Force: 6.8kg minimum
Tools
ORDER CODES
Infilink-Keystone Cat-6, Shielded, 8P8C
13
5
IP-KS6S
Glossary
www.InfilinkTechnologies.com
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
•
Robust die cast zinc alloy housing
Dual Color coding allows
568A/B wiring
Cat-6 Channel and Permanent
Link performance when installed
as a complete Cat-6 Shielded
System
RoHS Compliant
Cable Holder wire clamp
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-6A FTP Keystone
Jack Module
The Infilink eight-position tool less modular keystone jack
features a die-cast Housing. This innovative mechanism
optimizes the PSANEXT & PSAACR-F which are the most
critical criteria outlined by Class EA standard.
PCB route and unique contact alignment provides
excellent electrical characteristics in easing the internal
magnetic coupling up to bandwidth 500MHz. The jack
supports interoperable 10G BASE-T application,
backward compatible to any Class E, Class D solution.
Press-Fit tech is a unique feature in this jack with no
solder, no Pb, Purely RoHS compliant. This tool-less
keystone jack requires no punch down for installation.
Easy and fast installation is another key feature of this jack
to simplify your network and increase your efficiency.
18.4
14.6
25.7
19.4
16.7
40.05
34
8.1
9.75
Key Features
•
•
•
•
•
No Termination Tools required
Fits any Standard Face Plate
Full Cat-6A Performance
Accommodates 22-24 AWG
solid cable
Extended Warranty
Companion Products
Consider these related Infilink
products in your network planning
•
•
•
•
•
•
•
Infilink Patch Panels
Infilink Cat-6A Cables
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink 6A Connectivity
SPECIFICATIONS
PERFORMANCE
PHYSICAL
High Impact flame retardant plastic, UL 94V-0
rated, 60 micro inch gold over 110 micron inch
MECHANICAL
_____________________________________________________________________________________
• Plug insertion life (Mating)
750 Cycles with FCC compliant RJ-45 plug
_____________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
_____________________________________________________________________________________
• Plug retention force
30 lbs minimum
_____________________________________________________________________________________
• Storage Temperature
-40ºC to 68ºC
_____________________________________________________________________________________
• Operating Temperature
-10ºC to 60ºC
_____________________________________________________________________________________
• Operating Humidity
10%-90%RH
ELECTRICAL
_____________________________________________________________________________________
• Current Rating
1.5 Amps
_____________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
_____________________________________________________________________________________
• Contact Resistance
20 Milli-Ohm maximum
_____________________________________________________________________________________
• Transmission performance
10,000 Mbps
STANDARDS
_____________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• TIA/EIA
568-B.2-1 (Category 6A transmission performance)
ORDER CODES
Infilink Cat-6A Keystone Jack, Tool Less Shielded, TIA568B RoHS
14
IP-KS6AS
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
RJ-45 Male Plug and
Boot Covers
Connectors and
Outlets
The affordable and high-performance RJ-45 Plugs for
home and office use
Copper UTP
Cables
The Infilink eight-position RJ-45 Male Plug offers
enhanced performance at both component and channel
levels. This RJ-45 Male Plug offers Excellent performance
in NEXT and Attenuation.
The RJ-45 Male Plug is ideal for termination of modular
cords for patching or workstation applications, so that
modular cords can be terminated to the exact length
needed for neater, more organized installations. The plug
terminate 24 ~ 26 AWG solid or stranded wires. All Male
RJ-45 plugs do carry a 50 micron gold plating.
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
6.6
Copper Patch
Panels
7.9
22.5
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
•
Long insertion and durability
life cycle
Ideal for Solid and Stranded cords
Full Cat-5e Performance
Extended Warranty
Consider these related Infilink
products in your network planning
Infilink-Modular Plug Unsh. 8P8C, for Stranded &
IP-SERJ45
round cable Cat-5e pack of 100
_____________________________________________________________________________________
Infilink-RJ45 Boot Cover with Strain Relief Blue
IP-BC-B
_____________________________________________________________________________________
Infilink-RJ45 Boot Cover with Strain Relief Green
IP-BC-GR
_____________________________________________________________________________________
Infilink-RJ45 Boot Cover with Strain Relief Gray
IP-BC-GY
__________________________________________________________________________________
Infilink-RJ45 Boot Cover with Strain Relief Red
IP-BC-R
_____________________________________________________________________________________
Infilink-RJ45 Boot Cover with Strain Relief Yellow
IP-BC-Y
15
Glossary
www.InfilinkTechnologies.com
ORDER CODES
Tools
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Patch Cables
Infilink Cat-6 Connectivity
Data Center
Solutions
•
•
•
•
•
•
•
PHYSICAL
_____________________________________________________________________________________
MECHANICAL
_____________________________________________________________________________________
20 lbs min.
• Cable-Plug Tensile Strenght
_____________________________________________________________________________________
750 Cycles min.
• Durability
_____________________________________________________________________________________
-20oC to 80oC
• Temperature
_____________________________________________________________________________________
•
Humidity
10% - 90% RH
_____________________________________________________________________________________
ELECTRICAL
_____________________________________________________________________________________
• Rated Voltage, Current:
30V AC at 1.5 A
_____________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
_____________________________________________________________________________________
• Contact Resistance
20 Milli-Ohm maximum
_____________________________________________________________________________________
• Dielectric Strength
1000V AC (RMS)
_____________________________________________________________________________________
STANDARDS
_____________________________________________________________________________________
• ANSI/TIA
1096-A
_____________________________________________________________________________________
• ISO/IEC
11801 2nd Edition
__________________________________________________________________________________
• FCC
Part 68
_____________________________________________________________________________________
• IEC
6060 3-7
_____________________________________________________________________________________
Material
_____________________________________________________________________________________
• Housing
Polycarbonate (PC)
_____________________________________________________________________________________
• Contacts
Copper alloy selective, min. 50 Micron
gold over Nickel plating
Lead Free ROHS Compliant
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Faceplate British Style
Angled Modular 1 & 2 Port
The affordable and sleek one and two port faceplates
for home and office use.
At the work area or home, Infilink faceplates are designed
to mount in either one or two outlet configurations. These
faceplates are available in ivory 1 and 2 port straight
shuttered and angled modular shuttered varieties and
offer a sleek, elegant appearance. Designation labels
(included), provide ample circuit identification.
The faceplates can be mounted onto any British-Style
back box. Because the couplers can be easily snapped
out of the front of the faceplate, the faceplates do not
need to be removed after installation; making moves,
adds, and changes quick and easy. The preventive dust
cover with spring on the back side of the shutter will
ensure long cycle life and smooth action of the shutter for
years to come.
Key Features
•
•
•
•
•
Allow easy circuit identification
using the Infilink labeling
Shutters
Protective spring dust cover
Can be wall mounted
Extended Warranty
Companion Products
Consider these related Infilink
products in your network planning
•
•
•
•
•
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Keystone Jacks
Infilink Wall Boxes
SPECIFICATIONS
PERFORMANCE
PHYSICAL DIMENSTIONS (LxH)
86 x 86 (mm) Face Plate
_____________________________________________________________________________________
WEIGHT
0.20 Kg
ORDER CODES
Infilink-Face Plate, 86 x 86 UK Style, Double Port,
IP-FPAM2P
Angled, Shuttered, Modular
_____________________________________________________________________________________
Infilink-Face Plate, 86 x 86 UK Style, Single Port,
IP-FPAM1P
Angled, Shuttered, Modular
_____________________________________________________________________________________
Infilink-1-Port Angled module Bezel with ID for
IP-FPAMS1
IP-FPAM1P and IP-FPAM2P
_____________________________________________________________________________________
Infilink-Blank Insert 12.5 X 50mm for
IP-FPAMB1
IP-FPAM1P and IP-FPAM2P
16
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Faceplate
French & British Style
Connectors and
Outlets
The affordable and sleek one and two port faceplates
for home and office use.
Copper UTP
Cables
Infilink one-port French style faceplate designed for
home and office use. At the work area or home, Infilink
French & British style faceplates are designed to mount in
single-outlet configurations. These faceplates are
shuttered for elegant appearance. Designation lables
(included) provide ample circuit identification.
The faceplates can be mounted onto any French or British
style back box.
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
Fiber Optic
Accessories
Key Features
Fits any Standard Face Plate
•
Extended Warranty
Fiber Optics
Cable assemblies
•
Consider these related Infilink
products in your network planning
ORDER CODES
Infilink one port face plate French style 45X45
IP-FPFS1P
__________________________________________________________________________________
Infilink one port face plate British style 86X86
IP-FPBS1P
__________________________________________________________________________________
Infilink two ports face plate British style 86X86
IP-FPBS2P
17
Glossary
www.InfilinkTechnologies.com
MECHANICAL
__________________________________________________________________________________
ABS
• Body
__________________________________________________________________________________
- 40oC to +70oC
• Temperature
Tools
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink Cat-6 Connectivity
PERFORMANCE
Data Center
Solutions
•
•
•
•
•
•
•
•
SPECIFICATIONS
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
Surface Box Cat-5e Loaded
The affordable and sleek Surface box for home and
office use
At the work area or home, Infilink Surface Box is
designed to mount on any wall. These surface boxes are
available in ivory single-port loaded with one cat-5e
keystone jack, with elegant appearance. Designation
labels (included), provide ample circuit identification.
The preventive dust cover with spring on the back of the
shutter will ensure long cycle life and smooth action of the
shutter for years to come.
Key Features
•
•
•
•
•
Allow easy circuit identification
using the Infilink labeling
Shutters
Protective spring dust cover
Can be wall mounted
Extended Warranty
Companion Products
Consider these related Infilink
products in your network planning:
Infilink Patch Panels
• Infilink RJ-45 Connectors
• Infilink Keystone Jacks
• Infilink Wall Boxes
• Infilink Face Plates
• Infilink Boot Covers
• Infilink Patch Cables
• Infilink Cat-5e & 6
Connectivity
SPECIFICATIONS
PERFORMANCE
PHYSICAL DIMENSTIONS (LxH)
45.3 x 60.3 (mm) Surface Box
_____________________________________________________________________________________
WEIGHT
0.20 Kg
ORDER CODES
Infilink-Surface Mount Box, Single Port, Wall mount
IP-SB5E1L
_____________________________________________________________________________________
Infilink Back (Mounting) Box 86X86X43
IP-MBX01
18
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Green UTP Cable e-Series
(Gigabit)
Connectors and
Outlets
Giga Plus CCA UTP 4 pair Solid PVC cable Compliant
to Gigabit Ethernet (1000 Base-T) Standard
Copper UTP
Cables
Infilink is pleased to announce the availability of the very
latest Economic proofed UTP data cable performing to
fully Gigabit Ethernet Applications. Infilink e-Series GIGA
Plus CCA UTP cable is designed for Gigabit Ethernet &
ATM-155 standards! Over the last years in many markets
there has been increasing interest in Copper-Clad
Aluminum (CCA) wires as a possible way of reducing
material costs in certain types of cables. CCA consists of
copper cladding surrounding an aluminum core. The most
common grade of CCA is 10% CCA, meaning that it
contains 10% copper by volume: only 5% of the radial
thickness of this grade of CCA is copper and the rest is
aluminum, though it contains approximately 43% copper
by weight, since copper is a much denser metal than
aluminum. 10% CCA has an overall conductivity of 65%
IACS, i.e. 65% of the conductivity of an all-copper
conductor of the same cross-section, but its average
density is only 37% of copper.
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
•
•
Allow easy circuit identification
using the Infilink labeling
Shutters
Protective spring dust cover
Can be wall mounted
Extended Warranty
Consider these related Infilink
products in your network planning:
ENVIRONMENTAL SPECIFICATIONS
__________________________________________________________________________________
• Operating Temperature
0 to 55ºC
__________________________________________________________________________________
• Storage Temperature
-20 to 70ºC
__________________________________________________________________________________
• Humidity
10% to 85% RH non-condensing
ORDER CODES
E-Series Giga Plus CCA UTP 4 pair
19
IE-CCA6
Glossary
www.InfilinkTechnologies.com
LIMITED WARRANTY
5 years
__________________________________________________________________________________
STANDARD COMPLIANCES
ANSI/TIA/EIA-568-B ISO/IEC 11801
__________________________________________________________________________________
PHYSICAL DIMENSIONS (L x W x H) 390 x 390 x 230
__________________________________________________________________________________
WEIGHT
12.4 kg
Tools
Infilink Patch Panels
Infilink RJ-45 Connectors
Infilink Keystone Jacks
Infilink Wall Boxes
Infilink Face Plates
Infilink Boot Covers
Infilink Patch Cables
Infilink Cat-5e & 6
Connectivity
ELECTRICAL at 250 MHz
__________________________________________________________________________________
• Attenuation
31.2 dB/90 meter
__________________________________________________________________________________
• Next (Min)
38.1 dB
__________________________________________________________________________________
• PSNext (Min)
36.4 dB
__________________________________________________________________________________
• ELFEXT (Min)
19.5 dB
__________________________________________________________________________________
• PSELFEXT (Min)
16.4 dB
__________________________________________________________________________________
• Return Loss (Min)
12 dB
__________________________________________________________________________________
• ACR
8.7 dB at 90 meters
__________________________________________________________________________________
• PS ACR
9.8 dB at 90 meters
Data Center
Solutions
•
•
•
•
•
•
•
•
MECHANICAL
__________________________________________________________________________________
• Gauge Wire
23 AWG
__________________________________________________________________________________
• Core Diameter (Bare)
0.574 +/- 0.008 mm
__________________________________________________________________________________
• N.O.M. Outside Diameter
6.30 +/- 0.2 mm
__________________________________________________________________________________
• Metal Core Type
Solid
__________________________________________________________________________________
• Number of Pairs
4
__________________________________________________________________________________
• Jacket
PVC
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-5e UTP PVC Cable
(Giga Ready)
The affordable Giga Ready cable for high-performance
LAN connections
Infilink is pleased to announce the availability of the very
latest in high-grade data cable performing to fully ratified
Cat-5e (Enhanced) specifications for high performance
networks.
Exceeding standard data-grade Cat-5 data cable, Infilink
GIGA READY Cat-5e cable is designed with the very
latest network standards in mind including gigabit
Ethernet (1000 BaseTX) and ATM-155.
Complete
confidence is assured when running Infilink GIGA READY
Cat-5e data cable in your network with increased signal
reliability and improved signal characteristics compared
to stock grade Cat-5e data cable.
Our Infilink GIGA READY Cat-5e cable is manufactured
with specifications of ETL and UL standards in one of the
world's leading cable fabrication facilities maintaining the
highest quality of data cable anywhere in the world.
Infilink GIGA READY Cat-5e cable is not only Gigabit
ready, but also ex-stock ready anytime to any destination,
in its “easy-pull” box, loved by installers.
giga ready
Key Features
•
•
•
•
•
•
•
Snag – free box
Full Cat-5e Channel Test compliant
Meter marked for extra convenience
1000 Base –TX
(Gigabit Ethernet compliant)
ISO-11801, EIA/TIA 568A,
EN50173 Compliant
Exceeds the Category
5E performance standards
Full ETL and UL certified
Companion Products
Consider these related Infilink products
in your network planning
•
•
•
•
•
•
•
Infilink Patch Panels
Infilink RJ-45 Connectors
Infilink Keystone Jacks
Infilink Wall Boxes
Infilink Face Plates
Infilink Boot Covers
Infilink Patch Cables
SPECIFICATIONS
PERFORMANCE
Mechanical
__________________________________________________________________________________
Gauge Wire
24 AWG
__________________________________________________________________________________
Core Diameter
0.92 mm
__________________________________________________________________________________
N.O.M. Outside Diameter
5.20 mm
__________________________________________________________________________________
Metal Core type
Solid
__________________________________________________________________________________
Number of Pairs
4
__________________________________________________________________________________
Jacket
PVC
__________________________________________________________________________________
Electrical at 100 MHz
__________________________________________________________________________________
Attenuation (Max.)
22 dB/100 meter
__________________________________________________________________________________
Next (Min/Typical)
40/49 dB
__________________________________________________________________________________
PSNext (Min/Typical)
37/45 dB
__________________________________________________________________________________
ELFEXT (Min/Typical)
24/31 dB
__________________________________________________________________________________
PSELFEXT (Min/Typical)
21/28 dB
__________________________________________________________________________________
Return loss (Min.)
20.1 dB
__________________________________________________________________________________
ACR
27.2 dB at 90 meter
__________________________________________________________________________________
PS ACR
23.2 dB at 90 meter
__________________________________________________________________________________
LIMITED WARRANTY
15 Year
__________________________________________________________________________________
STANDARD COMPLIANCES
ANSI/TIA/EIA-568-A and B
__________________________________________________________________________________
ISO/IEC 11801
__________________________________________________________________________________
EN50173 Compliant
__________________________________________________________________________________
ETL Compliant
__________________________________________________________________________________
UL Compliant
__________________________________________________________________________________
ISO 9001
__________________________________________________________________________________
PHYSICAL DIMENSTIONS (LxWxH)
350 x 215 x 350 (mm)
__________________________________________________________________________________
WEIGHT
9.2 KG
__________________________________________________________________________________
ENVIRONMENTAL SPECIFICATIONS
__________________________________________________________________________________
Operating Temperature
0 to 55ºC
__________________________________________________________________________________
Storage Temperature
-20 to 70ºC
__________________________________________________________________________________
Humidity
10% to 85% RH non-condensing
ORDER CODES
Infilink – GIGA Ready UTP Cat-5e Solid 24 AWG 4 pair Cable
20
IP-CU5ePS
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6 UTP PVC Cable
(Thunder Series)
Connectors and
Outlets
Infilink is pleased to announce the availability of the very
latest in high-grade data cable performing to fully ratified
Cat-6 specifications for high-performance networks.
Exceeding standard data grade Cat-6 data cable, Infilink
GIGA READY Cat-6 cable is designed with the very latest
network standards in mind including gigabit Ethernet
(1000BaseTX) and ATM-155. Complete confidence is
assured when running Infilink GIGA READY Cat-6 data
cable in your network with increased signal reliability and
improved signal characteristics compared to stock grade
Cat-6 data cable.
Our Infilink GIGA READY Cat-6 cable is manufactured
with specifications of ETL and CE standards in one of the
world's leading cable fabrication facilities maintaining the
highest quality of data cable anywhere in the world.
Infilink GIGA READY Cat-6 cable is not only Gigabit
ready, but also ex-stock ready anytime to any destination,
in its “easy-pull” box, loved by installers.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
Companion Products
Infilink Patch Panels
Infilink RJ-45 Connectors
Infilink Keystone Jacks
Infilink Wall Boxes
Infilink Face Plates
Infilink Boot Covers
Tools
•
•
•
•
•
•
ORDER CODES
Infilink-Cat-6, High Performance ETL, UL, UTP Cable (305 meter)
21
IP-CU6P
Glossary
www.InfilinkTechnologies.com
Data Center
Solutions
Consider these related Infilink
products in your network planning
MECHANICAL
__________________________________________________________________________________
Gauge Wire
23 AWG
__________________________________________________________________________________
Core Diameter (Bare)
0.56 mm
__________________________________________________________________________________
N.O.M. Outside Diameter
6.30 mm
__________________________________________________________________________________
Metal Core type
Solid
__________________________________________________________________________________
Number of Pairs
4
__________________________________________________________________________________
Jacket
PVC
__________________________________________________________________________________
ELECTRICAL at 250 MHz
__________________________________________________________________________________
Attenuation
32.8 dB/90 meter
__________________________________________________________________________________
Next (Min)
38.3dB
__________________________________________________________________________________
PSNext (Min)
36.3 dB
__________________________________________________________________________________
ELFEXT (Min)
19.8 dB
__________________________________________________________________________________
PSELFEXT (Min)
16.8 dB
__________________________________________________________________________________
Return loss (Min)
17.3 dB
__________________________________________________________________________________
ACR
5.5 dB at 90 meter
__________________________________________________________________________________
PS ACR
3.5 dB at 90 meter
__________________________________________________________________________________
LIMITED WARRANTY
15 Year
__________________________________________________________________________________
STANDARD COMPLIANCES
ANSI/TIA/EIA-568-B
__________________________________________________________________________________
ISO/IEC 11801
__________________________________________________________________________________
EN50173 Compliant
__________________________________________________________________________________
ETL Verified
__________________________________________________________________________________
CE Verified
__________________________________________________________________________________
ISO 9001
__________________________________________________________________________________
PHYSICAL DIMENSTIONS (LxWxH) 330 x 265 x 335 (mm)
__________________________________________________________________________________
WEIGHT
14.6 KG
__________________________________________________________________________________
ENVIRONMENTAL SPECIFICATIONS
__________________________________________________________________________________
Operating Temperature
0 to 55o C
__________________________________________________________________________________
Storage Temperature
-20 to 70oC
__________________________________________________________________________________
Humidity
10% to 85% RH non-condensing
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
Snag – free box
Full Cat-6 Channel Test compliant
Meter marked for extra convenience
1000 Base –TX (Gigabit Ethernet
compliant)
ISO-11801, EIA/TIA 568B, EN50173
Compliant
Exceeds the Category 6 performance
standards
Full ETL and CE Verified
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-5e SFTP Cable (LSZH)
Infilink Shielded Solutions is ideal for industries where
interference is more common or data security is critical.
With shielding, internal data signals are securely
contained, and isolated from Electro Magnetic
Interference (EMI) and Radio Frequency Interference (RFI).
The modular solution of Infilink shielded solution, not only
provides flexibility to the installer, but also drastically
shortens termination time. Applicable for horizontal
network and voice application in a structured cabling
system, including digital video, broadband & baseband
analog video. Tinned copper braiding used inside the
cable over all the four pairs. A cross filler is cabled in
between to separate the four pairs of insulated
conductors. The cable is supported by a drain wire to
allow for grounding of any excess voltage on the link. The
overall jacket is covered with flame-retardant LSZH
compound.
Key Features
•
•
•
•
•
305 m/1000 ft – Wooden Reel
Full Cat-5e Channel Test compliant
ISO-11801, EIA/TIA 568B
Exceeds the Category 5e performance
standards
Delta EC Certified
Companion Products
Consider these related Infilink
products in your network planning:
•
•
•
•
•
Infilink Cat-5e Patch Panels
Infilink Cat-5e Keystone Jacks
Infilink Wall Boxes
Infilink Face Plates
Infilink Cat-5e Patch Cord
SPECIFICATIONS
PERFORMANCE
MECHANICAL
__________________________________________________________________________________
• Gauge Wire
24 AWG
__________________________________________________________________________________
• Core Diameter (Bare)
0.51 +/- 0.01 mm
__________________________________________________________________________________
• N.O.M. Outside Diameter
5.99 +/- 0.3 mm
__________________________________________________________________________________
• Metal Core Type
Solid
__________________________________________________________________________________
• Number of Pairs
4
__________________________________________________________________________________
• Jacket
LSHF
__________________________________________________________________________________
__________________________________________________________________________________
ELECTRICAL at 100 MHz
__________________________________________________________________________________
• Next (Min)
65.3 dB
__________________________________________________________________________________
• PSNext (Min)
62.3 dB
__________________________________________________________________________________
• ELFEXT (Min)
64.0 dB
__________________________________________________________________________________
• PSELFEXT (Min)
61.0 dB
__________________________________________________________________________________
• Return Loss (Min)
20 dB
__________________________________________________________________________________
• Insertion Loss
1.967dB at 100 meters
__________________________________________________________________________________
__________________________________________________________________________________
LIMITED WARRANTY
5 years
__________________________________________________________________________________
STANDARD COMPLIANCES
ANSI/TIA/EIA-568-B ISO/IEC 11801
__________________________________________________________________________________
ENVIRONMENTAL SPECIFICATIONS
__________________________________________________________________________________
• Operating Temperature
0 to 50ºC
__________________________________________________________________________________
• Storage Temperature
-10 to 50ºC
ORDER CODES
Infilink Cat-5e SFTP 23AWG 4 Pair Solid Copper Cable LSZH
22
IP-CSF5e
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6 SFTP Solid Cable (LSZH)
Connectors and
Outlets
Infilink Shielded Solutions is ideal for industries where
interference is more common or data security is critical.
With shielding, internal data signals are securely
contained, and isolated from Electro Magnetic
Interference (EMI) and Radio Frequency Interference (RFI).
The modular solution of Infilink shielded solution, not only
provides flexibility to the installer, but also drastically
shortens project completion time.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
305 m/1000 ft – Wooden Reel
Full Cat-6 Channel Test compliant
ISO-11801, EIA/TIA 568B
Exceeds the Category 6 performance
standards
Delta EC Certified
LIMITED WARRANTY
5 years
__________________________________________________________________________________
STANDARD COMPLIANCES
ANSI/TIA/EIA-568-B ISO/IEC 11801
__________________________________________________________________________________
ENVIRONMENTAL SPECIFICATIONS
__________________________________________________________________________________
• Operating Temperature
0 to 50ºC
__________________________________________________________________________________
• Storage Temperature
-10 to 50ºC
Infilink Cat-6 Patch Panels
Infilink Cat-6 Keystone Jacks
Infilink Wall Boxes
Infilink Face Plates
Infilink Cat-6 Patch Cord
Tools
•
•
•
•
•
ELECTRICAL at 250 MHz
__________________________________________________________________________________
• Next (Min)
34.8 dB
__________________________________________________________________________________
• PSNext (Min)
31.8 dB
__________________________________________________________________________________
• ELFEXT (Min)
14.0 dB
__________________________________________________________________________________
• PSELFEXT (Min)
11.0 dB
__________________________________________________________________________________
• Return Loss (Min)
17.3 dB
__________________________________________________________________________________
• Insertion Loss
45.3 dB at 100 meters
ORDER CODES
Infilink Cat-6 SFTP 23AWG 4 Pair Solid Copper Cable LSZH
23
IP-CSF6
Glossary
www.InfilinkTechnologies.com
Data Center
Solutions
Consider these related Infilink
products in your network planning:
MECHANICAL
__________________________________________________________________________________
• Gauge Wire
23 AWG
__________________________________________________________________________________
• Core Diameter (Bare)
0.56 +/- 0.01 mm
__________________________________________________________________________________
• N.O.M. Outside Diameter
6.30 +/- 0.2 mm
__________________________________________________________________________________
• Metal Core Type
Solid
__________________________________________________________________________________
• Number of Pairs
4
__________________________________________________________________________________
• Jacket
LSHF
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-6A FFTP Solid Cable (LSZH)
Infilink Cat-6A cable operates at frequencies up to
500MHz and will provide up to 10G bit/s bandwidth. It can
support future 10G bit/s applications up to a maximum
distance of 100 meters on a four-connector channel. Four
twisted pairs of 23 guage solid copper conductors in 1000
feet (305 meters) in wooden reels. Compliant with Industry
standards TIA/EIA 568-B 2-10. ISO/IEC 11801
compliance meets all Alien crosstalk reduction
specification, and is backward compatible with Cat-5e
and Cat-6.
Aluminium/PET Tape
Insulated Pair
Overall Aluminium / PET Tape
Key Features
•
•
•
•
•
•
305 m/1000 ft – Wooden Reel
Full Cat-6A Permanent Link Test
compliant
10G Base –T (10 Gigabit Ethernet
compliant)
ISO-11801, EIA/TIA 568B, Compliant
Exceeds the Category 6A performance
standards
Delta EC Certified
Companion Products
Consider these related Infilink
products in your network planning:
•
•
•
•
•
•
Infilink Cat-6A Patch Panels
Infilink Cat-6A Keystone Jacks
Infilink Wall Boxes
Infilink Face Plates
Infilink Cat-6A Patch Cord
Infilink Cat-6A Connectivity
SPECIFICATIONS
PERFORMANCE
MECHANICAL
__________________________________________________________________________________
23 AWG
• Gauge Wire
__________________________________________________________________________________
0.56 +/- 0.01 mm
• Core Diameter (Bare)
__________________________________________________________________________________
• N.O.M. Outside Diameter
6.30 +/- 0.2 mm
__________________________________________________________________________________
• Metal Core Type
Solid
__________________________________________________________________________________
• Number of Pairs
4
__________________________________________________________________________________
LSHF
• Jacket
ELECTRICAL at 500 MHz
__________________________________________________________________________________
• Next (Min)
34.8 dB
__________________________________________________________________________________
• PSNext (Min)
31.8 dB
__________________________________________________________________________________
• ELFEXT (Min)
14.0 dB
__________________________________________________________________________________
11.0 dB
• PSELFEXT (Min)
__________________________________________________________________________________
• Return Loss (Min)
17.3 dB
__________________________________________________________________________________
45.3 dB at 100 meters
• Insertion Loss
LIMITED WARRANTY
5 years
__________________________________________________________________________________
STANDARD COMPLIANCES
ANSI/TIA/EIA-568-B ISO/IEC 11801
ENVIRONMENTAL SPECIFICATIONS
__________________________________________________________________________________
• Operating Temperature
0 to 50oC
__________________________________________________________________________________
• Storage Temperature
-10 to 50oC
ORDER CODES
Infilink Cat-6A F-FTP 23AWG 4 Pair Solid Cable LSZH
24
IP-CFF6A
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-5e UTP Patch Cord
Assemblies
Connectors and
Outlets
Infilink Cat-5e Patch Cord Assemblies come in various
colors and sizes. All Patch Cords in this range exceed
TIA/EIA-568-A requirements for four-pair (RJ45)
unshielded twisted-pair applications. Patch Cords are all
of stranded wire type, supported by PVC jacket
construction. To protect the RJ-45 connectors and thus
increase Patch cable life cycle, booth/covers are inserted
at each end.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
PERFORMANCE
PHYSICAL
High Impact flame retardant plastic,
__________________________________________________________________________________
UL 94V-0 rated, 50 micro inch gold over
__________________________________________________________________________________
100 micron inch
•
•
Full Cat-5e Channel performance
Various colors and sizes
Ideal for Networking and
IP Telephony applications
ETL, UL, TIA/EIA, ISO Compliant
Extended Warranty
ORDER CODES
Companion Products
Consider these related Infilink
products in your network planning
25
Glossary
www.InfilinkTechnologies.com
Tools
Infilink RJ-45 Connectors
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink faceplates
Infilink Wall Boxes
Infilink Keystone Jacks
Infilink Cat-6 Connectivity
Data Center
Solutions
•
•
•
•
•
•
•
IP-PC505BK
Infilink-Patch Cord Assembly, Cat-5e, 0.5 meter, Black
__________________________________________________________________________________
IP-PC505GY
Infilink-Patch Cord Assembly, Cat-5e, 0.5 meter, Gray
__________________________________________________________________________________
IP-PC510GY
Infilink-Patch Cord Assembly, Cat-5e, 1 meter, Gray
__________________________________________________________________________________
IP-PC510GR
Infilink-Patch Cord Assembly, Cat-5e, 1 meter, Green
__________________________________________________________________________________
IP-PC510B
Infilink-Patch Cord Assembly, Cat-5e, 1 meter, Blue
__________________________________________________________________________________
IP-PC510R
Infilink-Patch Cord Assembly, Cat-5e, 1 meter, Red
__________________________________________________________________________________
IP-PC510Y
Infilink-Patch Cord Assembly, Cat-5e, 1 meter, Yellow
__________________________________________________________________________________
IP-PC520GY
Infilink-Patch Cord Assembly, Cat-5e, 2 meter, Gray
__________________________________________________________________________________
IP-PC520GR
Infilink-Patch Cord Assembly, Cat-5e, 2 meter, Green
__________________________________________________________________________________
IP-PC520B
Infilink-Patch Cord Assembly, Cat-5e, 2 meter, Blue
__________________________________________________________________________________
IP-PC520R
Infilink-Patch Cord Assembly, Cat-5e, 2 meter, Red
__________________________________________________________________________________
IP-PC520Y
Infilink-Patch Cord Assembly, Cat-5e, 2 meter, Yellow
__________________________________________________________________________________
IP-PC530GY
Infilink-Patch Cord Assembly, Cat-5e, 3 meter, Gray
__________________________________________________________________________________
IP-PC530GR
Infilink-Patch Cord Assembly, Cat-5e, 3 meter, Green
__________________________________________________________________________________
IP-PC530B
Infilink-Patch Cord Assembly, Cat-5e, 3 meter, Blue
__________________________________________________________________________________
IP-PC530R
Infilink-Patch Cord Assembly, Cat-5e, 3 meter, Red
__________________________________________________________________________________
IP-PC530Y
Infilink-Patch Cord Assembly, Cat-5e, 3 meter, Yellow
__________________________________________________________________________________
IP-PC550GY
Infilink-Patch Cord Assembly, Cat-5e, 5 meter, Gray
__________________________________________________________________________________
IP-PC511GY
Infilink-Patch Cord Assembly, Cat-5e, 10 meter, Gray
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
STANDARDS
__________________________________________________________________________________
• ETL & UL
Full ETL and UL certification
__________________________________________________________________________________
• TIA/EIA
568A , EN 50173 compliant
__________________________________________________________________________________
• ISO
11801
Fiber Optics
Cable assemblies
•
•
•
ELECTRICAL
__________________________________________________________________________________
• Rated voltage
30 V
__________________________________________________________________________________
• Rated current
1.5 Amps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
__________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
__________________________________________________________________________________
• Transmission performance
100 Mbps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-ohm minimum
Fiber Optic
Accessories
Key Features
Fiber Optic Cables
(OM2, OM3, OS1)
SPECIFICATIONS
Cat-6 UTP Patch Cord
Assemblies
The Infilink - Thunder Series Cat-6 Patch Cords come in
various colors and sizes. All Patch Cords in this range are
ETL verified and do exceed the EIA/TIA 568B standards
for 24 AWG stranded conductor unshielded twisted-pair
applications, delivering a whoping 250MHz. Patch Cords
are all of stranded wire type to increase flexibility and
durability and housed by PVC jacket construction. To
protect the RJ-45 connectors and thus improve Patch
Cord life cycle, a-newly designed and revolutionary boot
covers are inserted at each end of the patch cord, indicating
the lenght that is being used.
Key Features
•
•
•
•
•
Full Cat-6 Channel performance
Various colors and sizes
Ideal for Gigabit Networking and
IP Telephony applications
ETL, UL, TIA/EIA, ISO Compliant
Extended Warranty
Companion Products
Consider these related Infilink products
in your network planning
•
•
•
•
•
•
•
Infilink RJ-45 Connectors
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink Faceplates
Infilink Wall Boxes
Infilink Keystone Jacks
Infilink Cat-6 Connectivity
SPECIFICATIONS
PERFORMANCE
PHYSICAL
High Impact flame retardant plastic,
UL 94V-0 rated, 50 micron plated
connectors
ELECTRICAL
__________________________________________________________________________________
• Rated voltage
30 V
__________________________________________________________________________________
• Rated current
1.5 Amps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
__________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
__________________________________________________________________________________
• Transmission performance
250 Mbps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-ohm minimum
STANDARDS
__________________________________________________________________________________
• ETL & UL
Full ETL and UL certification
__________________________________________________________________________________
• TIA/EIA
568B , EN 50173 compliant
__________________________________________________________________________________
• ISO
11801
ORDER CODES
Infilink-Patch Cord Assembly, Cat-6, 0.3 meter, Gray
IP-PC603GY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 0.5 meter, Gray
IP-PC605GY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 1 meter, Gray
IP-PC610GY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 1 meter, Black
IP-PC610BK
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 1 meter, White
IP-PC610W
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 2 meter, Gray
IP-PC620GY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 2 meter, Black
IP-PC620BK
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 2 meter, White
IP-PC620W
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 3 meter, Gray
IP-PC630GY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 3 meter, Black
IP-PC630BK
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 3 meter, White
IP-PC630W
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 5 meter, Gray
IP-PC650GY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, Cat-6, 10 meter, Gray
IP-PC611GY
26
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6 Shielded Patch Cord
Assembilies
Connectors and
Outlets
The Infilink - Shielded CAT 6 Patch Cords come in
various colors and sizes. All Patch Cords in this range are
ETL verified and do exceed the EIA/TIA 568B standards
for 24 AWG stranded conductor unshielded twisted-pair
applications, delivering a whopping 250MHz. Patch
Cords are all of stranded wire type to increase flexibility
and durability and housed by PVC jacket construction.
To protect the RJ-45 connectors and thus improve Patch
Cord life cycle, newly designed and revolutionary boot
covers are inserted at each end of the patch cord,
indicting what length is being used.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
Full Cat-6 Channel performance
Various colors and sizes
Ideal for Gigabit Networking and
Industrial environments
ETL, UL, TIA/EIA, ISO Compliant
PHYSICAL
High Impact flame retardant plastic,
__________________________________________________________________________________
UL 94V-0 rated, 50 micron plated
__________________________________________________________________________________
connectors 23 AWG Core Diameter 0.56mm
ELECTRICAL
__________________________________________________________________________________
• Rated voltage
30 V
__________________________________________________________________________________
• Rated current
1.5 Amps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
__________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
__________________________________________________________________________________
• Transmission performance
1,000 Mbps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-ohm minimum
STANDARDS
__________________________________________________________________________________
• ETL & UL
Full ETL and UL certification
__________________________________________________________________________________
• TIA/EIA
568B , EN 50173 compliant
__________________________________________________________________________________
• ISO
11801
Consider these related Infilink
products in your network planning:
27
Glossary
www.InfilinkTechnologies.com
ORDER CODES
IP-PCSF605GY
Infilink-Patch Cord Assembly, SFTP Cat-6, 0.5 meter, Gray
__________________________________________________________________________________
IP-PCSF610GY
Infilink-Patch Cord Assembly, SFTP Cat-6, 1 meter, Gray
__________________________________________________________________________________
IP-PCDF610GY
Infilink-Patch Cord Assembly, SFTP Cat-6, 1 meter, Gray
__________________________________________________________________________________
IP-PCSF630GY
Infilink-Patch Cord Assembly, SFTP Cat-6, 3 meter, Gray
__________________________________________________________________________________
IP-PCSF650GY
Infilink-Patch Cord Assembly, SFTP Cat-6, 5 meter, Gray
Tools
Infilink RJ-45 Connectors
Infilink Patch Panels
Infilink Cat-5e & 6 Cables
Infilink Faceplates
Infilink Wall Boxes
Infilink Keystone Jacks
Infilink Cat-6 Connectivity
Data Center
Solutions
•
•
•
•
•
•
•
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-6A Shielded
Patch Cord Assemblies
The Infilink - Shielded Cat-6A Patch Cords come in
various colors and sizes. All Patch Cords in this range are
Delta EC verified and do exceed the EIA/TIA 568-B.2-10
standards for 23 AWG stranded conductor shielded
twisted-pair applications, delivering a whopping 500MHz.
Stranded bare copper conductors insulated with foam
thermoplastics polyolefin. Two insulated conductors are
twisted together to form a pair shielded with
Aluminum/polyester foil. Four such pairs are cabled
together to form the basic unit. Aluminum Polyester Tape
overall covers the four pairs. Patch Cords are all of
stranded wire type to increase flexibility and durability and
are housed by LSZH jacket construction. To protect the
RJ-45 connectors and thus improve Patch Cord life cycle,
high-quality boot covers are inserted at each end of the
patch cord.
Key Features
•
•
•
•
•
Full Cat-6A Channel performance
Various colors and sizes
Ideal for 10Gigabit Networking and
Industrial environments
TIA/EIA, ISO Compliant
Extended Warranty
Companion Products
SPECIFICATIONS
PERFORMANCE
PHYSICAL
__________________________________________________________________________________
26AWG Stranded bare copper
• Conductor
__________________________________________________________________________________
Foam PE
• Insulation
__________________________________________________________________________________
Tinned copper drain wire
• Shield
__________________________________________________________________________________
LSHF
• Jacket
__________________________________________________________________________________
-10ºC to 60ºC
• Operating temperature
ELECTRICAL
__________________________________________________________________________________
95
• Max. conductor resistance(ohm/[email protected]ºC)
__________________________________________________________________________________
4
• Max. DC resistance unbalance(%)
__________________________________________________________________________________
10,000 Mbps
• Transmission performance
__________________________________________________________________________________
56
• Max. mutual capacitance(pF/m)
568-B.2-10
STANDARDS
__________________________________________________________________________________
11801 2nd Edition
• TIA/EIA
__________________________________________________________________________________
• ISO
Consider these related Infilink products
in your network planning
•
•
•
•
Infilink Cat-6A Patch Panel
Infilink Cat-6A Cable
Infilink Faceplates
Infilink Cat-6A Keystone Jack
ORDER CODES
Infilink-Patch Cord Assembly, F/FTP Cat-6A, 1 meter ,LSZH, Yellow
IP-PC610AY
__________________________________________________________________________________
Infilink-Patch Cord Assembly, F/FTP Cat-6A, 2 meter ,LSZH, Yellow
__________________________________________________________________________________
IP-PC620AY
Infilink-Patch Cord Assembly, F/FTP Cat-6A, 3 meter ,LSZH, Yellow
IP-PC630AY
28
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-5e UTP, Patch
Panel 16, 24, 48 Ports
Connectors and
Outlets
At the office work area or in harsh industrial environments,
Infilink patch panels are designed to mount in any
standard 19” width rack. These patch panels offer a sleek,
elegant appearance. Infilink Enhanced Category 5 Patch
Panels meet or exceed all of the proposed TIA
requirements for Category 5e. Infilink Enhanced
Category 5 patch panels simplify inventory management
by providing a universal label for both T568A and T568B
wiring patterns which allows connection with 22-26 AWG
wires and is offered in 48, 24,16 port varieties. The cable
ties, mini punch down tool and connector crowns provide
tools for better management of cables.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
Companion Products
(LxH) 19” x 1U
MECHANICAL
__________________________________________________________________________________
• Plug insertion life
750 Cycles
__________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
__________________________________________________________________________________
• Plug retention force
30 lbs minimum
__________________________________________________________________________________
• Temperature
-40oC to 68oC
ELECTRICAL
__________________________________________________________________________________
• Current Rating
1.5 Amps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
__________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
__________________________________________________________________________________
• Transmission performance
100 Mbps
STANDARDS
__________________________________________________________________________________
• UL
UL Certified
__________________________________________________________________________________
• FCC
Part 68
__________________________________________________________________________________
• TIA/EIA
568-B.2 (Category 5e transmission performance)
Data Center
Solutions
ORDER CODES
Infilink-16 Port Cat-5e Patch Panel UTP RJ-45
IP-PP5E16
__________________________________________________________________________________
Infilink-24 Port Cat-5e Patch Panel UTP RJ-45
IP-PP5E24
__________________________________________________________________________________
Infilink-48 Port Cat-5e Patch Panel UTP RJ-45
IP-PP5E48
29
Glossary
www.InfilinkTechnologies.com
Tools
Consider these related Infilink
products in your network planning:
• Infilink Cat-5e & 6 Cables
• Infilink RJ-45 Connectors
• Infilink Faceplates
• Infilink Wall Boxes
• Infilink Boot Covers
• Infilink Patch Cables
• Infilink Cat-6 Connectivity
PHYSICAL
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
•
•
Allow easy circuit identifi cation
using the Infi link labeling
Crowns to Circuit protection
In full Compliance with T568A
and T568B, Cat-5e Performance
standards
Fits to any Standard 19” rack
No Termination Tools required
Extended Warranty
PERFORMANCE
Fiber Optics
Cable assemblies
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Cat-5e FTP Patch Panel
At the office work area or in harsh industrial environments,
Infi link FTP Unloaded patch panels are designed to
mount in any standard 19” width rack. These patch panels
offer a sleek, elegant appearance with Graphite Grey
finish. Infilink FTP Category 5e patch panels simplify
inventory management by providing a universal label for
T568B wiring pattern which allow connection with 22-26
AWG wires and are offered in 24 port with integral rear
cable management. It is highly recommended to use
Infilink Shielded Keystone Jacks (i.e IP-KS5S) with this
patch panel. Integral rear cable manager controls
minimum bend radius of the cable which means better
performance for the whole system.
482.5
464.5
7
31.7
18.5
White color
10
Key Features
•
•
•
•
•
Allow easy circuit identification
using the Infilink labeling
Integral rear cable management
In full Compliance with T568-C.2,
Cat-5e Performance standards
Fits to any Standard 19” rack
Extended Warranty
Companion Products
SPECIFICATIONS
PERFORMANCE
PHYSICAL DIMENSTIONS (LxH)
19” x 1U
MECHANICAL
__________________________________________________________________________________
• Mating
750 mating Cycles with FCC compliant
RJ-45 Jack Accommodates 23 AWG
solid cable for 200 times termination
__________________________________________________________________________________
o
o
• Wire accommodation
-10 C to 60 C
__________________________________________________________________________________
-10% to 90%RH
• Operating Temperature Storage
__________________________________________________________________________________
-10oC to 60oC
Temperature Operating Humidity
STANDARDS
__________________________________________________________________________________
UL certified
• UL
__________________________________________________________________________________
Part 68, Subpart F
• FCC
__________________________________________________________________________________
TIA/EIA-568-C.2
• TIA/EIA
__________________________________________________________________________________
EN 50173
• EN
__________________________________________________________________________________
ISO/IEC 11801, 2nd Ed.
• ISO
Consider these related Infilink products
in your network planning
•
•
•
•
•
Infilink Cat-5e Shielded Cables
Infilink Faceplates
Infilink Wall Boxes
Infilink Shielded Patch Cords
Infilink Shielded Cat-5e
Keystone Jacks
ORDER CODES
Infilink-FTP 24 port Cat-5e Patch Panel Unloaded FTP RJ-45
30
IP-PP524S
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6 UTP Patch
Panel 16, 24 & 48 Ports
Connectors and
Outlets
At the office work area or the harsh industrial
environments, Infilink patch panels are designed to
mount in any standard 19” width rack. These patch panels
offer a sleek, elegant appearance. Infilink Enhanced
Category 6 Patch Panels meet or exceed all of the
proposed TIA requirements for the Category 6 standard.
Infilink Category 6 patch panels simplify inventory
management by providing universal labels for T568B
wiring patterns which allow connection with 22-26 AWG
wires and are offered in 48, 24 and 16 port varieties. The
cable ties, mini punch down tool and connector crowns
provide tools for better management of cables.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
•
Crowns to Circuit protection
In full Compliance with T568B,
Cat-6 Performance standards
Fits to any Standard 19” rack
No Termination Tools required
Extended Warranty
PHYSICAL (LxH)
19” x 1U
MECHANICAL
__________________________________________________________________________________
• Plug insertion life
750 Cycles
__________________________________________________________________________________
• Plug and Jack contact force
100 grams min, using FCC approved plug
__________________________________________________________________________________
• Plug retention force
30 lbs minimum
__________________________________________________________________________________
• Temperature
-40ºC to 68ºC
ELECTRICAL
__________________________________________________________________________________
• Current Rating
1.5 Amps
__________________________________________________________________________________
• Insulation Resistance
500 Mega-Ohm minimum
__________________________________________________________________________________
• Contact Resistance
20 Milli-ohm maximum
__________________________________________________________________________________
• Transmission performance
100 Mbps (Max)
STANDARDS
__________________________________________________________________________________
• UL
UL Certified
__________________________________________________________________________________
• FCC
Part 68
__________________________________________________________________________________
• TIA/EIA
568-B.2 (Category 6 transmission performance)
Consider these related Infilink
products in your network planning:
ORDER CODES
Infilink-16 Port Cat-6 Patch Panel UTP RJ-45
IP-PP616
__________________________________________________________________________________
Infilink-24 Port Cat-6 Patch Panel UTP RJ-45
IP-PP624
__________________________________________________________________________________
Infilink-48 Port Cat-6 Patch Panel UTP RJ-45
IP-PP648
Tools
Glossary
www.InfilinkTechnologies.com
Data Center
Solutions
• Infilink RJ-45 Connectors
• Infilink Patch Panels
• Infilink Cat-5e & 6 Cables
• Infilink Faceplates
• Infilink Wall Boxes
• Infilink Keystone Jacks
• Infilink Cat-6 Connectivity
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
PERFORMANCE
Fiber Optics
Cable assemblies
•
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
31
Cat-6 FTP Patch Panel
Whether in an office work area or in harsh industrial
environments, Infilink FTP Unloaded patch panels are
designed to mount in any standard 19” width rack. These
patch panels offer a sleek, elegant appearance with
Graphite Gray finish. FTP Category 6 patch panels
simplify inventory management by providing a universal
label for T568B wiring pattern which allows connection
with 22-26 AWG wires and are offered in 24 port with
integral rear cable management. It is highly recommended
to use Infilink Shielded Keystone Jacks (i.e IP-KS6S) with
this patch panel. The integral rear cable manager controls
the minimum bend radius of the cable and this means
better performance for the whole system.
482.5
464.5
31.7
18.5
7
Cat6
White color
10
Key Features
•
•
•
•
•
Allow easy circuit identification
using the Infilink labeling
Integral rear cable management
In full Compliance with T568-C.2,
Cat-6 Performance standards
Fits to any Standard 19” rack
Extended Warranty
Companion Products
SPECIFICATIONS
PERFORMANCE
PHYSICAL DIMENSTIONS (LxH)
19” x 1U
MECHANICAL
__________________________________________________________________________________
• Mating
750 mating Cycles with FCC compliant
RJ-45 Jack Accommodates 23 AWG
solid cable for 200 times termination
__________________________________________________________________________________
• Wire accommodation
-10ºC to 60ºC
__________________________________________________________________________________
• Operating Temperature Storage
-10% to 90%RH
__________________________________________________________________________________
Temperature Operating Humidity
-10ºC to 60ºC
STANDARDS
__________________________________________________________________________________
• UL
UL certified
__________________________________________________________________________________
• FCC
Part 68, Subpart F
__________________________________________________________________________________
• TIA/EIA
TIA/EIA-568-C.2
__________________________________________________________________________________
• EN
EN 50173
__________________________________________________________________________________
• ISO
ISO/IEC 11801, 2nd Ed.
Consider these related Infilink products
in your network planning
•
•
•
•
•
Infilink Cat-5e & 6 Shielded Cables
Infilink Faceplates
Infilink Wall Boxes
Infilink Shielded Patch Cords
Infilink Shielded Cat-5e & 6
Keystone Jacks
ORDER CODES
Infilink-FTP 24 port Cat-6 Patch Panel Unloaded FTP RJ-45
32
IP-PP624S
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Cat-6A FTP Patch Panel
Connectors and
Outlets
The Infilink Cat-6A Patch Panel supports 10 Gigabits
applications at 500 MHz frequency. In an office work area
or in harsh industrial environments, Infilink FTP Unloaded
patch panels are designed to mount in any standard 19”
width rack. These 24-port patch panels offer a sleek,
elegant appearance with Graphite Gray finish.
Infilink FTP Category 6A patch panels simplify inventory
management by providing universal labels for T568B
wiring patterns which allow connection with 22-26 AWG
wires and are offered in a 24-port configuration with
integral rear cable management. It is highly recommended
to use Infilink Shielded Keystone Jacks (IP-KS6AS) with
this patch panel.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
482.5
464.5
31.7
7
White color
10
•
•
•
Companion Products
PHYSICAL DIMENSTIONS (LxH)
19” x 1U
MECHANICAL
__________________________________________________________________________________
• Mating
750 mating Cycles with FCC compliant
__________________________________________________________________________________
• Wire accommodation
RJ-45 Jack
__________________________________________________________________________________
• Operating Temperature Storage
Accommodates 23 AWG solid cable for
Temperature Operating Humidity
200 times termination
-10ºC to 60ºC
-10% to 90%RH
-10ºC to 60ºC
STANDARDS
__________________________________________________________________________________
• FCC
Part 68, Subpart F
__________________________________________________________________________________
• TIA/EIA
568-B.2-1 (Category 6A transmission
__________________________________________________________________________________
• EN
performance)
__________________________________________________________________________________
• ISO
EN 50173
__________________________________________________________________________________
ISO/IEC 11801, 2nd Ed.
Infilink Cat-6A Shielded Cables
Infilink Faceplates
Infilink Wall Boxes
Infilink Shielded Cat-6A Patch Cords
Infilink Shielded Cat-6A
Keystone Jacks
Tools
•
•
•
•
•
Data Center
Solutions
Consider these related Infilink
products in your network planning:
ORDER CODES
Infilink-FTP 24 port Cat-6A Patch Panel Unloaded FTP RJ-45
33
IP-PP6A24S
Glossary
www.InfilinkTechnologies.com
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
•
10 G Base-T (10 Gigabits Ethernet)
compliant
Allow easy circuit identification
using the Infilink labeling
Integral rear cable management
In full Compliance with
TIA 568-B.2-1 Category 6A
transmission performance)
Fits to any Standard 19” rack
Extended Warranty
PERFORMANCE
Fiber Optics
Cable assemblies
•
SPECIFICATIONS
Fiber Optic
Accessories
Key Features
Fiber Optic Cables
(OM2, OM3, OS1)
18.5
Unloaded Patch Panel 16 port
In an office work area or in harsh industrial environments,
Infilink patch panels are designed to mount in any
standard 19” width rack. These patch panels offer a sleek,
elegant appearance. This patch panel has no depth,
therefore it is suited to be used as a consolidation point
specially in security applications like CCTV that need a
small rack or cabinet.
Infilink unloaded Patch Panels accept most standard
cat-5e and cat-6 keystone jacks. They offer the
convenience of enabling IT Managers to have a
combination of different types of Key Stone Jacks from
different brands at the same time.
Key Features
•
•
•
Allow easy circuit identification using
the Infilink labeling
Fits to any Standard 19” rack
Extended Warranty
SPECIFICATIONS
PERFORMANCE
PHYSICAL DIMENSTIONS (LxH)
19” x 1U
MECHANICAL
__________________________________________________________________________________
• Mating
750 mating Cycles with FCC compliant
RJ-45 Jack Accommodates 23 AWG
solid cable for 200 times termination
__________________________________________________________________________________
• Panel Material
SPCC, T=1.5mm
Black Powder coating finish
__________________________________________________________________________________
• Station ID
High impacked acrylonitrile Butadiene
styrene (ABS Resin)
__________________________________________________________________________________
• Operating Temperature Storage
-10ºC to 60ºC
Temperature Operating Humidity
-10% to 90%RH
Companion Products
Consider these related Infilink products
in your network planning
•
•
•
•
•
•
•
Infilink Cat-5e & 6 Cables
Infilink RJ-45 Connectors
Infilink Faceplates
Infilink Wall Boxes
Infilink Boot Covers
Infilink Patch Cables
Infilink Cat-6 Connectivity
ORDER CODES
Infilink-16 port unloaded Patch Panel UTP RJ45
34
IP-PP16
www.InfilinkTechnologies.com
Company
Profile
FRP Strength
Member
Copper Shielded
Twisted Pair
Cables
Specifications
Glossary
All Infilink FO cables comes with
separate OTDR test report
Tools
35
Data Center
Solutions
www.InfilinkTechnologies.com
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Description
Weight (Kg)
______________________________________________________________________________________________________________________________
Infilink FO Indoor Cable 2Core 9/125 PE 1KM/Reel
9
IP-FR29Y1
______________________________________________________________________________________________________________________________
Infilink FO Indoor Cable 2Core 9/125 PE 2KM/Reel
18
IP-FR29Y2
Fiber Optics
Cable assemblies
ORDER CODES
Fiber Optic
Accessories
Printings on optical fiber cable
______________________________________________________________________________________________________________________________
Black printings are printed at intervals of 1 meter with the following information.
______________________________________________________________________________________________________________________________
1.
Meter marks
______________________________________________________________________________________________________________________________
2.
Type of cable and fiber count
______________________________________________________________________________________________________________________________
3.
Infilink name
______________________________________________________________________________________________________________________________
4.
Year of manufacture
Fiber Optic Cables
(OM2, OM3, OS1)
Packing and markings
Copper Patch
Panels
Attenuation
dB/km
≤0.36 at 1310nm
_______________________________________________________________________________________________________________________________
≤0.3 at 1550nm
_______________________________________________________________________________________________________________________________
Chromatic Dispersion
Ps/nm.km
≤3.5 at 1285~1330nm
_______________________________________________________________________________________________________________________________
≤18.0 at 1550nm
_______________________________________________________________________________________________________________________________
Zero Dispersion Wavelength
Nm
1302~1322
_______________________________________________________________________________________________________________________________
Zero Dispersion Slope
Ps/nm.km
≤0.095
_______________________________________________________________________________________________________________________________
Cut-off Wavelength
Nm
≤1260
_______________________________________________________________________________________________________________________________
Mode Field Diameter (MFD)
Um
1310
9.2±0.4
_______________________________________________________________________________________________________________________________
1550 10.4±0.8
_______________________________________________________________________________________________________________________________
Mode Field Concentricity
Um
≤0.8
_______________________________________________________________________________________________________________________________
Cladding Diameter
um
125±1.0
_______________________________________________________________________________________________________________________________
Cladding Non-circularity
%
≤1
_______________________________________________________________________________________________________________________________
Coating Cladding concentricity error
Um
≤12
_______________________________________________________________________________________________________________________________
Coating Diameter
um
245±1.0
_______________________________________________________________________________________________________________________________
Proof test
kpsi
≥100
_______________________________________________________________________________________________________________________________
Temperature range Storage/Shipping
Cº
-10º -- +60º
_______________________________________________________________________________________________________________________________
Temperature range Operating
Cº
-10º -- +60º
_______________________________________________________________________________________________________________________________
Min. Bending Radius (mm)
Dynamic(mm)
20H
_______________________________________________________________________________________________________________________________
Min. Bending Radius (mm)
Static(mm)
10H
_______________________________________________________________________________________________________________________________
Max. Tension (N)
Short-term(N)
100
_______________________________________________________________________________________________________________________________
Max. Tension (N)
Long-term(N)
50
_______________________________________________________________________________________________________________________________
Max. Crushing Resistance
N/100mm2
1000
_______________________________________________________________________________________________________________________________
No. of fiber
2
_______________________________________________________________________________________________________________________________
Fiber model no.
Single mode: G.652
_______________________________________________________________________________________________________________________________
Fiber color
Blue, orange
_______________________________________________________________________________________________________________________________
Outer diameter of color coating
250±15um
_______________________________________________________________________________________________________________________________
Dielectric strength member
FRP
_______________________________________________________________________________________________________________________________
Jacket
LSZH
_______________________________________________________________________________________________________________________________
Colour of Jacket
White
_______________________________________________________________________________________________________________________________
Size of optical fiber cable
width
3.1±0.2
_______________________________________________________________________________________________________________________________
height
1.9±0.2
Copper Cable
Assemblies
Units
LSZH Jacket
Copper UTP
Cables
Items
Connectors and
Outlets
Infilink’s Flat FTTH Drop Cable is used in high speed and
broadband telecommunication indoor applications.
It contains two general-purpose single-mode fibers FTTH
indoor LAN cable, suitable for installation in villas, multi
dwelling units, home short-distance data transmission.
The indoor fiber construction is comprised of white
optical fibers, two parallel FRP (Fiber Reinforced Plastic)
strength members and an LSZH Jacket.
These lightweight cables have excellent crush and impact
resistance properties.
Infilink Flat FTTH cable meets EIA-TIA 455 and
IEC-60794. Optical characteristics of the cable meets
ISO/IEC 11801 standard.
Voice-Telephone
System
Fiber Optic Cable FTTH 2 Core
Indoor Single Mode LSZH
Fiber Optic Cable FTTH 2 Core
Outdoor Single Mode PE
Infilink’s Flat FTTH Drop Cable is used in high speed and
broadband telecommunication outdoor applications.
Outdoor FTTH flat cable construction is similar to the
indoor cable, except the cable jacket is made of flame
retardant Black PE.
Fiber used in these cables is bend-insensitive so it can be
used in applications with multiple bends.
These lightweight cables have excellent crush and impact
resistance properties.
Infilink Flat FTTH cable meets EIA-TIA 455 and
IEC-60794. Optical characteristics of the cable meet
ISO/IEC 11801 standard.
Items
Units
PE Jacket
FRP Strength
Member
Specifications
Attenuation
dB/km
≤0.36 at 1310nm
______________________________________________________________________________________________________________________________
≤0.3 at 1550nm
______________________________________________________________________________________________________________________________
Chromatic Dispersion
Ps/nm.km
≤3.5 at 1285~1330nm
______________________________________________________________________________________________________________________________
≤18.0 at 1550nm
______________________________________________________________________________________________________________________________
Zero Dispersion Wavelength
Nm
1302~1322
______________________________________________________________________________________________________________________________
Zero Dispersion Slope
Ps/nm.km
≤0.095
______________________________________________________________________________________________________________________________
Cut-off Wavelength
Nm
≤1260
______________________________________________________________________________________________________________________________
Mode Field Diameter (MFD)
Um
1310
9.2±0.4
______________________________________________________________________________________________________________________________
1550 10.4±0.8
______________________________________________________________________________________________________________________________
Mode Field Concentricity
Um
≤0.8
______________________________________________________________________________________________________________________________
Cladding Diameter
um
125±1.0
______________________________________________________________________________________________________________________________
Cladding Non-circularity
%
≤1
______________________________________________________________________________________________________________________________
Coating Cladding concentricity error
Um
≤12
______________________________________________________________________________________________________________________________
Coating Diameter
um
245±1.0
______________________________________________________________________________________________________________________________
Proof test
kpsi
≥100
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Temperature range Storage/Shipping
Cº
-10º -- +75º
______________________________________________________________________________________________________________________________
Operating temperature range (Operating)
Cº
-10º -- +75º
______________________________________________________________________________________________________________________________
Min. Bending Radius (mm)
Dynamic(mm)
20H
______________________________________________________________________________________________________________________________
Min. Bending Radius (mm)
Static(mm)
10H
______________________________________________________________________________________________________________________________
Max. Tension (N)
Short-term(N)
80
______________________________________________________________________________________________________________________________
Max. Tension (N)
Long-term(N)
40
______________________________________________________________________________________________________________________________
Max. Crushing Resistance
N/100mm2
500
______________________________________________________________________________________________________________________________
No. of fiber
2
______________________________________________________________________________________________________________________________
Fiber model no.
Single mode: G.652
______________________________________________________________________________________________________________________________
Fiber color
Blue, orange
______________________________________________________________________________________________________________________________
Outer diameter of color coating
250±15um
______________________________________________________________________________________________________________________________
Dielectric strength member
FRP
______________________________________________________________________________________________________________________________
Jacket
PE
______________________________________________________________________________________________________________________________
Colour of Jacket
Black
______________________________________________________________________________________________________________________________
Size of optical fiber cable width
mm
3.1±0.2�
______________________________________________________________________________________________________________________________
height
mm
1.9±0.2�
Packing and markings
Printings on optical fiber cable
_______________________________________________________________________________________________________________________________
Black printings are printed at intervals of 1 meter with the following information.
_______________________________________________________________________________________________________________________________
1.
Meter marks
_______________________________________________________________________________________________________________________________
2.
Type of cable and fiber count
_______________________________________________________________________________________________________________________________
3.
Infilink name
_______________________________________________________________________________________________________________________________
4.
Year of manufacture
ORDER CODES
Description
Weight (Kg)
_______________________________________________________________________________________________________________________________
Infilink FO Outdoor Cable 2Core 9/125 PE 1KM/RL
9
IP-FR29X1
_______________________________________________________________________________________________________________________________
Infilink FO Outdoor Cable 2Core 9/125 PE 2KM/RL
18
IP-FR29X2
All Infilink FO cables comes with
separate OTDR test report
36
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Fiber Optic Cable 2 Core
Indoor Multimode Zipcord
Out Jacket
0.9mm Buffered
Specifications
Description
Weight (Kg)
______________________________________________________________________________________________________________________________
Infilink FO Indoor Cable 2Core Zipcord 9/125 LSZH 1KM/RL
9
IP-FR29C1
______________________________________________________________________________________________________________________________
Infilink FO Indoor Cable 2Core Zipcord 9/125 LSZH 2KM/RL
18
IP-FR29C2
37
All Infilink FO cables comes with
separate OTDR test report
Glossary
www.InfilinkTechnologies.com
Tools
ORDER CODES
Data Center
Solutions
Printings on optical fiber cable
______________________________________________________________________________________________________________________________
Black printings are printed at intervals of 1 meter with the following information.
______________________________________________________________________________________________________________________________
1.
Meter marks
______________________________________________________________________________________________________________________________
2.
Type of cable and fiber count
______________________________________________________________________________________________________________________________
3.
Infilink name
______________________________________________________________________________________________________________________________
4.
Year of manufacture
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Packing and Markings
Fiber Optics
Cable assemblies
1000
Fiber Optic
Accessories
N/100mm2
Fiber Optic Cables
(OM2, OM3, OS1)
Max. Crushing Resistance (N/100mm2)
Copper Patch
Panels
1
Fiber Count
2
_____________________________________________________________________________________________________
2
Fiber Characteristic
OD: 242±7 um
_____________________________________________________________________________________________________
3
Tight buffered:
_____________________________________________________________________________________________________
Material
environmental protected PVC
_____________________________________________________________________________________________________
OD
0.87±0.05 mm
_____________________________________________________________________________________________________
Thickness
0.31±0.02 mm
_____________________________________________________________________________________________________
Color
Multimode (natural, orange)
_____________________________________________________________________________________________________
4
Out jacket
_____________________________________________________________________________________________________
Thickness
0.33±0.04 mm
_____________________________________________________________________________________________________
Material
LSZH
_____________________________________________________________________________________________________
OD
(1.82 - 1.98)×(3.9 - 4.3)
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Fiber property:
_____________________________________________________________________________________________________
Fiber mode
Unit
Multimode 50/125
_____________________________________________________________________________________________________
Condition
nm
850/1300
_____________________________________________________________________________________________________
Attenuation
dB/km
3.5/1.5
_____________________________________________________________________________________________________
Dispersion
1550nm
ps(nm·km)
----_____________________________________________________________________________________________________
1625nm
ps(nm·km)
----_____________________________________________________________________________________________________
Bandwidth
850nm
MHZ·.km
≥200
_____________________________________________________________________________________________________
1300nm
MHZ. ·km
≥200
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Application:
_____________________________________________________________________________________________________
Temperature range
ºC
-20ºC_____________________________________________________________________________________________________
+70ºC
_____________________________________________________________________________________________________
Nominal Weight
‘g/m
8.8
_____________________________________________________________________________________________________
Min. Bending Radius (mm)
Dynamic
mm
20H
_____________________________________________________________________________________________________
Min. Bending Radius (mm)
Static
mm
10H
_____________________________________________________________________________________________________
Max. Tensile strength (N)
Short-term
N
200
_____________________________________________________________________________________________________
Max. Tensile strength (N)
Long-term
N
100
_____________________________________________________________________________________________________
Copper Cable
Assemblies
Items
Copper Shielded
Twisted Pair
Cables
Infilink ZipCord Optical Fiber Cable Features:
• Low insertion loss
• High return loss (low amounts of reflection at the
interface)
• Ease of installation
• High reliability
• Low environmental sensitivity
• LSZH
Copper UTP
Cables
Aramid Yarn
Connectors and
Outlets
Designed for easy installation and high performance,
Infilink ZipCord Low Smoke Zero Halogen (LSZH) cables
are reliable indoor applications especially on the horizontal
(fiber to desk) where space is limited. Additionally these
ZipCords can be utilized for Patch Cord assembly. The
ZipCord come in Multimode varieties.
Fiber Optic Cable Tight Buffered
4-48 Cores Indoor SM & MM LSZH
With superior technology and profile control, Infilink Tight Butter OS1,
OM2 and OM3 fibers revolutionize performance in local area networks,
storage area networks, and central office interconnects. The Infilink
Tight Buffer cable is designed with 900µm buffered structure for making
easy connections. Its dry structure is perfect for risers and horizontal
deployment and well as in duct applications (by pulling)
Infilink Tight Buffer Optical Fiber Cable Features:
• Indoor cable
• Suitable for use in ducts or risers
• Designed for direct connectorization
• All dielectric design
• LSZH Outer Sheath
• 4 to 48 fibers
• Compact design
• Optical fiber coated 900µm
• Aramid yarns reinforcement
Mechanical Characteristics
OS1
OM2
Kevlar
TBF
Jacket
OM3
AtteMechanical Characteristics
OS1
OM2
OM3
____________________________________________________________________________________________________________
Tight Buffer Fiber diameter
0.87±0.05mm
0.87±0.05mm
0.87±0.05mm
____________________________________________________________________________________________________________
Fiber Diameter
242+-7 um
242+-7 um
242+-7 um
____________________________________________________________________________________________________________
Min. Bending Radius Dynamic(mm)
20
20
20
____________________________________________________________________________________________________________
Min. Bending Radius Static(mm)
10
10
10
____________________________________________________________________________________________________________
Max. Tensile(N) Short Term
480
480
480
____________________________________________________________________________________________________________
Max. Tensile(N) Long Term
160
160
160
____________________________________________________________________________________________________________
Max. Crsuh Resistance(N/100mm2)
1000
1000
1000
____________________________________________________________________________________________________________
Climate Characteristics
OS1
OM2
OM3
____________________________________________________________________________________________________________
Storage Temprature
-20 to 70
-20 to 70
-20 to 70
____________________________________________________________________________________________________________
Installation/Operating Temprature
-5 to 55
-5 to 55
-5 to 55
____________________________________________________________________________________________________________
Halogen-free
____________________________________________________________________________________________________________
Optical Characteristics
OS1
OM2
OM3
____________________________________________________________________________________________________________
Frequecny 1310/1550
850/1300
850/1300
____________________________________________________________________________________________________________
Attenuation(dB/KM)
0.36/0.23
3.0/1.0
3.0/1.0
____________________________________________________________________________________________________________
Despersion 1550nm PS(nm.KM)
<=18
____________________________________________________________________________________________________________
Despersion 1625nm PS(nm.KM)
<=22
____________________________________________________________________________________________________________
Bandwidth 850nm (MHZ.KM)
>=200
>=1500
____________________________________________________________________________________________________________
Bandwidth 1300nm (MHZ.KM)
>=400
>=500
____________________________________________________________________________________________________________
Application OS1
OM2
OM3
____________________________________________________________________________________________________________
Indoor cabling
____________________________________________________________________________________________________________
OM2
____________________________________________________________________________________________________________
number of fibers
Cable diameter(mm)
Cable Color
Weight(Kg)/KM
____________________________________________________________________________________________________________
4
6.0+-0.20
Orange
32
IP-FR51Y4
____________________________________________________________________________________________________________
6
6.0+-0.20
Orange
32
IP-FR51Y6
____________________________________________________________________________________________________________
8
6.0+-0.20
Orange
32
IP-FR51Y8
____________________________________________________________________________________________________________
12
8.0+-0.25
Orange
37
IP-FR51Y12
____________________________________________________________________________________________________________
24
8.0+-0.25
Orange
43
IP-FR51Y24
____________________________________________________________________________________________________________
48
8.0+-0.25
Orange
52
IP-FR51Y48
____________________________________________________________________________________________________________
OM3
____________________________________________________________________________________________________________
4
6.0+-0.20
Orange
32
IP-FR51X4
____________________________________________________________________________________________________________
6
6.0+-0.20
Orange
32
IP-FR51X6
____________________________________________________________________________________________________________
8
6.0+-0.20
Orange
32
IP-FR51X8
____________________________________________________________________________________________________________
12
8.0+-0.25
Orange
37
IP-FR51X12
____________________________________________________________________________________________________________
24
8.0+-0.25
Orange
43
IP-FR51X24
____________________________________________________________________________________________________________
48
8.0+-0.25
Orange
52
IP-FR51X48
____________________________________________________________________________________________________________
OS1
____________________________________________________________________________________________________________
4
6.0+-0.20
Yellow
32
IP-FR91Y4
____________________________________________________________________________________________________________
6
6.0+-0.20
Yellow
32
IP-FR91Y6
____________________________________________________________________________________________________________
8
6.0+-0.20
Yellow
32
IP-FR91Y8
____________________________________________________________________________________________________________
12
8.0+-0.25
Yellow
37
IP-FR91Y12
____________________________________________________________________________________________________________
24
8.0+-0.25
Yellow
43
IP-FR91Y24
____________________________________________________________________________________________________________
48
8.0+-0.25
Yellow
52
IP-FR91Y48
____________________________________________________________________________________________________________
Packing and markings
____________________________________________________________________________________________________________
Printings on optical fiber cable
____________________________________________________________________________________________________________
Black printings are printed at intervals of 1 meter with the following information.
____________________________________________________________________________________________________________
1.
Meter marks
____________________________________________________________________________________________________________
2.
Type of cable and fiber count
____________________________________________________________________________________________________________
3.
Infilink name
____________________________________________________________________________________________________________
4.
Year of manufacture
All Infilink FO cables comes with
separate OTDR test report in wooden drums
38
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Fiber Optic Cable Loose Tube 2-12
Core Indoor/Outdoor SM & MM
Fiber
Aramid Yarn
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Glossary
All Infilink FO cables comes with
separate OTDR test report
Tools
39
5
Data Center
Solutions
Description
Weight (Kg)
_______________________________________________________________________________________________________________________________
Infilink FOCable12CoreLooseTubeSM9/125 (OS1)Armrd-1KM
9
IP-FR98X12-1
_______________________________________________________________________________________________________________________________
Infilink FOCable12CoreLooseTubeSM9/125 (OS1)Armrd-2K
18
IP-FR98X12-2
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
ORDER CODES
Fiber Optics
Cable assemblies
Printings on optical fiber cable
_______________________________________________________________________________________________________________________________
Black printings are printed at intervals of 1 meter with the following information.
_______________________________________________________________________________________________________________________________
1.
Meter marks
_______________________________________________________________________________________________________________________________
2.
Type of cable and fiber count
_______________________________________________________________________________________________________________________________
3.
Infilink name
_______________________________________________________________________________________________________________________________
4.
Year of manufacture
Fiber Optic
Accessories
Packing and markings
Fiber Optic Cables
(OM2, OM3, OS1)
Specifications
1
Fiber Count
2 to 12
______________________________________________________________________________________________________________________________
2
Fiber Characteristic
according to the standard chromatogram
______________________________________________________________________________________________________________________________
3
Outer diameter of PBT tube
Φ3.0±0.1mm
______________________________________________________________________________________________________________________________
4
Aramid yarn
______________________________________________________________________________________________________________________________
5
Out jacket
______________________________________________________________________________________________________________________________
Material
LSZH
______________________________________________________________________________________________________________________________
OD
6.5±0.3mm
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Fiber mode
Unit
Single mode
Multimode
Multimode
Multimode
______________________________________________________________________________________________________________________________
fiber G652B
fiber 50/125
fiber 62.5/125
fiber OM3 300
______________________________________________________________________________________________________________________________
Condition
nm
1310/1550
850/1300
850/1300
850/1300
______________________________________________________________________________________________________________________________
Attenuation
dB/km
0.36/0.23
3.5/1.5
3.5/1.5
3.5/1.5
______________________________________________________________________________________________________________________________
Dispersion
1550nm
ps(nm·km)
≤18
------------______________________________________________________________________________________________________________________________
1625nm
ps(nm·km)
≤22
------------______________________________________________________________________________________________________________________________
Bandwidth
850nm
MHZ·.km
----≥200
≥160
≥1500
______________________________________________________________________________________________________________________________
1300nm
MHZ. ·km
----≥200
≥200
≥500
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Application:
______________________________________________________________________________________________________________________________
oC
Temperature range
-40o-- +70o
______________________________________________________________________________________________________________________________
Nominal weight
‘g/m
LSZH:55
______________________________________________________________________________________________________________________________
Min.Bending Radius (mm)
Dynamic
mm
20H
______________________________________________________________________________________________________________________________
Min.Bending Radius (mm)
Static
mm
10H
______________________________________________________________________________________________________________________________
Max.Tension (N)
Long-term
N
500
______________________________________________________________________________________________________________________________
Short-term
N
1200
www.InfilinkTechnologies.com
Copper UTP
Cables
Items
Out Jacket
Connectors and
Outlets
Infilink indoor/outdoor loose tube fiber optic cable is a
dry core cable with moisture blocking gel inside the
thermoplastic buffer tube. The individually colored 250 um
fibers are surrounded by gel for moisture resistance, and
well as protection against thermal expansion and
contraction over the operating temperature range. The
UV resistant thermoplastic jacket protects the cables life
cycle in direct sunlight conditions.
Infilink indoor/outdoor loose tube fiber cables are offered
in all grades of multimode and single-mode from 2 to 12
fibers.
Infilink indoor/outdoor loose tube fiber cables Features:
• 2 to 12 Fiber Counts Available
• Low Smoke Zero-Halogen Jacket
• Outdoor Applications where Gel-Filled Cables are
Suitable for Best Water-Blocking
• Indoor/Outdoor Applications where Termination via
Pigtail Splicing is Preferred
• Suitable for Lashed Aerial, Duct, Underground
Conduit and Indoor Riser Applications
Fiber Optic Cable Loose Tube 2-12
Core Outdoor Steel Wire Armored
Infilink’s indoor/outdoor armored single loose tube cables are designed
to meet all the rigors of the outside plant environment, and have the
necessary ratings to be installed inside the building. These cables
eliminate the messy gel filler of traditional loose tube style cables with
super absorbent polymers. The installer can place the cable anywhere
in the network, bypassing the traditional transition points required in
most installations. Cables are available with fiber counts 12 in a single
tube.
Infilink indoor/outdoor armored single loose tube cables Features:
• No cleaning of gels, greatly reduces installation time
• Reduces labor costs by eliminating transition points at the
demarcation
• Can be used outdoors or indoors
• Low insertion loss
• High return loss (low amounts of reflection at the interface)
• Ease of installation
• Low cost
• Reliability
• Low environmental sensitivity
• Ease of use
• Single-Tube construction
• Additionally straighten member
Armored
PBT Tube
Steel wire
Water-Block
Tape
PE Jacket
Other demanding
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
1
Appearance
_____________________________________________________________________________________________________
Slickn ess
_____________________________________________________________________________________________________
2
Package
_____________________________________________________________________________________________________
Wooden dru m
_____________________________________________________________________________________________________
3
Length per drum
_____________________________________________________________________________________________________
2
KM per drum; other length is upon requested
_____________________________________________________________________________________________________
4
Test report
_____________________________________________________________________________________________________
Attached with the OTDR test report
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Fiber characteristic
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Fiber Mode
Unit
Single mode
Multimode
Multimode
Multimode
_____________________________________________________________________________________________________
G652B
5 0/125
_____________________________________________________________________________________________________
62.5/125
OM3 300
_____________________________________________________________________________________________________
Condition
nm
1310/1550
850/1300
850/1300
850/1300
_____________________________________________________________________________________________________
Attenuation
dB/km
0.36/0.23
3.0/1.0
3.0/1.0
3.0/1.0
_____________________________________________________________________________________________________
Dispersion
1550nm
ps(nm·km)
≤18
------------_____________________________________________________________________________________________________
1625nm
ps(nm·km)
≤22
------------_____________________________________________________________________________________________________
Bandwidth
850nm
MHZ.km
----≥200 ≥160 ≥1500
_____________________________________________________________________________________________________
1300nm
MHZ. ·km
----≥200 ≥200 ≥500
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Application
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Fiber Count
12
_____________________________________________________________________________________________________
Outer diameter(mm
8.0
_____________________________________________________________________________________________________
Nominal Weight kg/km
60
_____________________________________________________________________________________________________
Max. Tension
Short-term
2,500
_____________________________________________________________________________________________________
N
Long-term
800
_____________________________________________________________________________________________________
Max. Crushing Resistance (N/100mm2)
2,800
_____________________________________________________________________________________________________
Max. Bending Radius
Dynamic
20D
____________________________________________________________________________________________________
mm
Static
10D
ORDER CODES
12 core loose tube steel wire Armored MM 50/125 (OM2) 1KM
12 core loose tube steel wire Armored MM 50/125 (OM2) 2KM
All Infilink FO cables comes with
separate OTDR test report in wooden drums
IP-FR99Y12-1
IP-FR99Y12-2
40
www.InfilinkTechnologies.com
Company
Profile
Copolymer coated steel tape
Loose Tube
Central strength member
Flooding compound
Filling compound
LSZH/PE jacket
Water blocking tape
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
Fiber Optic
Accessories
Fiber Optics
Cable assemblies
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Data Center
Solutions
Item
Characteristics
______________________________________________________________________________________________________________________________
Operation temperature
-20C~+60C
______________________________________________________________________________________________________________________________
Storage temperature
-40C~+60C
______________________________________________________________________________________________________________________________
Sheath Material
P:PE; L:LSZH; or other
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Fiber
Outside
L.T
Cable
Tensile Load
Crush Load
Bend Radius
______________________________________________________________________________________________________________________________
Count
Diameter
Diameter
Weight
S
L
S
L
S
L
______________________________________________________________________________________________________________________________
(mm)
(mm)
(kg/km)
(N)
(N)
(N)
(N)
(M)
(M)
______________________________________________________________________________________________________________________________
24
10.2
5
122.0
1500
600
1000 300
20D
10D
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Color Code
______________________________________________________________________________________________________________________________
BL- Blue
BR- Brown
RE- Red
PU- Purple
______________________________________________________________________________________________________________________________
OR- Orange
GY- Grey
BK- Black
PI- Pink
______________________________________________________________________________________________________________________________
GR- Green
WH- White
YE- Yellow
AQ- Aqua
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Optical Characteristics :
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Glass Type
62.5/125um
62.5/125um
50/125um
50/125um
50/125um
SM(G652)
______________________________________________________________________________________________________________________________
Grade B
Grade A
Grade B
Grade A
OM3
______________________________________________________________________________________________________________________________
P/N Code(X)
62B
62A
50B
50A
OM3
09
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Operating
______________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________
Wavelength
850/1300nm
850/1300nm
850/1300nm
850/1300nm
850/1300nm
1310/1550nm
______________________________________________________________________________________________________________________________
Bandwidth
______________________________________________________________________________________________________________________________
(MHz.km)
160/500
200/600
200/500
400/800
1500/500
______________________________________________________________________________________________________________________________
Attenuation
______________________________________________________________________________________________________________________________
(dB/km)
3.50/1.50
3.00/1.00
3..50/1.50
3.00/1.00
2.70/0.80
0.45/0.30
Copper Shielded
Twisted Pair
Cables
Infilink indoor/outdoor armored loose tube cables.
Features:
• No cleaning of gels, greatly reduces installation time
• Reduces labor costs by eliminating transition
points at the demarcation
• Can be used outdoors or indoors
• Low insertion loss
• High return loss (low amounts of reflection at the
interface)
• Ease of installation
• Low cost
• Reliability
• Low environmental sensitivity
• Ease of use
• Multitube Construction
• Additionally straighten member
Copper UTP
Cables
Optical fiber
Connectors and
Outlets
Infilink's full line of indoor/outdoor armored multi loose
tube cables are designed to meet all the rigors of the
outside plant environment, and also have the necessary
ratings to be installed inside the building. These cables
eliminate the messy gel filler of traditional loose tube style
cables with super absorbent polymers. The installer can
place the cable anywhere in the network, bypassing the
traditional transition points required in most installations.
Cables are available with fiber counts from 12 to 144 in
multiple tubes.
Voice-Telephone
System
Fiber Optic Cable Loose Tube 24
Core Outdoor SM & MM Steel Tape
Tools
ORDER CODES
24 core loose tube steel tape Armored PE
IP-FRX924P
_____________________________________________________________________________________________________________________________
24 core loose tube steel tape Armored LSZH
IP-FRX924L
41
5
Glossary
www.InfilinkTechnologies.com
Fiber Optic Cable Loose Tube
Outdoor SM & MM Double
Armored With Two Jackets
Infilink’s Outside Plant Single Armor Double Jacket Loose Tube fiber optic
cables are designed for installation in harsh environments such as direct
burial, aerial lashing, conduit and pathways that are subjected to wide
temperature variations. The Armored Outside Plant product incorporates a
corrugated steel armor tape between two jackets surrounding the core and
is offered with two 144 fibers per cable. These cables are thoroughly tested
and verified to TIA standard for outside cabling systems.
Infilink Outside Plant Single Armor Double Jacket Loose Tube fiber optic
cables Features:
• High tensile strength, crush-resistant and small-diameter design
• Single-mode, multimode and hybrid design options available
• Corrugated steel armor provides crush and rodent resistance
• Fully water-blocked core using dry water blocking system
• Low Smoke, Zero Halogen and Armored designs
• Provides greater pulling distances, thus reducing installation time
• Broad design selection enables mix and match of fiber components
to specific networking applications
• One cable design meets all structured cabling applications
• Long-term reliability
• Low cable plant maintenance, ease of installation
• Reduced network costs
PE Out Jacket
Steel Tape
Steel Tape
Coloured Fiber
Loose Tube
PE Inner Sheath
Items
Specifications
_____________________________________________________________________________________________________
1
–
Fiber
Count
2 to 144
_____________________________________________________________________________________________________
2 – Fiber Characteristic
According to the standard chromatogram
_____________________________________________________________________________________________________
3 – Outer diameter of Loose Tube
2.15±0.05mm
_____________________________________________________________________________________________________
4 – Central Strenght Member
Steel Wire
_____________________________________________________________________________________________________
5 – Armored steel tape thickness
0.15mm
_____________________________________________________________________________________________________
6 – Out jacket Material
PE
_____________________________________________________________________________________________________
Fiber mode
Unit
Single mode
Multimode
Multimode
fiber G652B
fiber 50/125
fiber 62.5/125
_____________________________________________________________________________________________________
Condition
nm
1310/1550
850/1300
850/1300
_____________________________________________________________________________________________________
Attenuation
dB/km
0.4/0.3
3.5/1.5
3.0/1.0
_____________________________________________________________________________________________________
Dispersion 1550nm
ps(nm·km)
≤18
--------_____________________________________________________________________________________________________
1625nm
ps(nm·km)
≤22
--------_____________________________________________________________________________________________________
Bandwidth 850nm
MHZ·.km
----≥200
≥160
_____________________________________________________________________________________________________
1300nm
MHZ. ·km
----≥200
≥200
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Application:
_____________________________________________________________________________________________________
Temperature range
ºC
-40º-- +70º
_____________________________________________________________________________________________________
Nominal weight
‘g/m
LSZH:55
_____________________________________________________________________________________________________
Min.Bending Radius (mm)
Dynamic
mm
20D
_____________________________________________________________________________________________________
Min.Bending Radius (mm)
Dynamic
mm
10D
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Cable Data:
_____________________________________________________________________________________________________
Fiber count
O.D.(mm)
No. of Tubes
Cable wt.(kg/km) Max. tension(N)
Max. crush resistance (N/100 )
_____________________________________________________________________________________________________
Short
Long
Short
Long
_____________________________________________________________________________________________________
2--60
13.0±0.5
6
145
3000
1000
3000
1000
_____________________________________________________________________________________________________
62--72
13.0±0.5
6
196
3000
1000
3000
1000
_____________________________________________________________________________________________________
74--96
14.0±0.5
8
230
3000
1000
3000
1000
_____________________________________________________________________________________________________
98--120
16.0±0.5
10
270
3000
1000
3000
1000
_____________________________________________________________________________________________________
122--144
18.5±0.5
12
360
3000
1000
3000
1000
Packing and markings
Printings on optical fiber cable
______________________________________________________________________________________________________________________________
Black printings are printed at intervals of 1 meter with the following information.
______________________________________________________________________________________________________________________________
1.
Meter marks
______________________________________________________________________________________________________________________________
2.
Type of cable and fiber count
______________________________________________________________________________________________________________________________
3.
Infilink name
______________________________________________________________________________________________________________________________
4.
Year of manufacture
Ask your distributor for FO cables part numbers
All Infilink FO cables comes with
separate OTDR test report
42
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Fiber Optic Connectors
Connectors and
Outlets
Infilink Optical fiber connectors are used to join optical
fibers where a connect/disconnect capability is required.
Typical application for Optical fiber connectors are
telephone company central offices, at installations on
customer premises, and in outside plant applications.
Connectors are used to connect equipment and cables,
or to cross-connect cables within a system. The basic
connector unit is a connector assembly. A connector
assembly consists of an adapter and two connector plugs
and comes in LC, SC, SC/APC varieties, supports both
Single Mode and Multimode applications up to 10 Gbps,
and supports up to 1,000 mating cycles.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
PERFORMANCE
Companion Products
Consider these related Infilink
products in your network planning:
Infilink FO cables
Infilink FO adapters
Infilink FO patch cords
Infilink FO pigtails
Infilink FO patch panels
Data Center
Solutions
•
•
•
•
•
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
• Operating Temperature
-30ºC to 75ºC
_______________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
_______________________________________________________________________________
• Ferrule hole sizes (SM)
125.5+- 0.5 (um)
_______________________________________________________________________________
• Ferrule hole sizes (MM)
127.0+- 1.0 (um)
_______________________________________________________________________________
• Insertion loss (dB)
SM <=0.2
_______________________________________________________________________________
• Insertion loss (dB)
MM<=0.3
_____________________________________________________________________________________
• Return loss (dB)
SM (PC) >=50C.2
_____________________________________________________________________________________
• Return loss (dB)
SM (APC) >=60
_____________________________________________________________________________________
• Exchangeability (dB)
<=0.2
_____________________________________________________________________________________
• Repeatability (dB)
<=0.2
_____________________________________________________________________________________
• Durability (dB)
<= 0.2 typical change, 1,000 mating
Fiber Optics
Cable assemblies
•
SPECIFICATIONS
Fiber Optic
Accessories
•
Connectors are available in different
type of connectors SC, LC, ST, FC,
MTRJ,..
Connectors have variety of OM2,
OM3 and OS1
Extended Warranty
Fiber Optic Cables
(OM2, OM3, OS1)
•
Copper Patch
Panels
Key Features
Copper Cable
Assemblies
Infilink Optical Fiber Connectors offer:
• Low insertion loss
• High return loss (low amounts of reflection
at the interface)
• Ease of installation
• Low cost
• Reliability
• Low environmental sensitivity
• Ease of use
ORDER CODES
43
5
Glossary
www.InfilinkTechnologies.com
Tools
Infilink FO Connector SC/PC SM
IP-FN931
_____________________________________________________________________________________
Infilink FO Connector SC/PC MM
IP-FN531
_____________________________________________________________________________________
Infilink FO Connector LC/PC SM
IP-FN901
_____________________________________________________________________________________
Infilink FO Connector LC/PC MM
IP-FN501
Fiber Optic Adaptors
Infilink's full line of LC, SC, and APC couplers feature
tightly toleranced slots to assure proper orientation of
mated connectors. Typical applications for optical fiber
couplers are in patch panels used in telephone company
central offices, at installations on customer premises, and
in outside plant applications. Infilink couplers feature
ceramic sleeves to ensure precise alignment and signal
integrity.
Infilink Optical Fiber Coupler features:
• Used to connect duplex SC fiber cables
• Plastic body provides a light-weight yet durable
solution
• Dust caps protect against debris and
contamination
• Ceramic alignment sleeve provides precise
alignment for lower loss
Key Features
•
•
•
•
Adaptors are available in different
type of connectors SC, LC, ST, FC,
MTRJ,.
Adaptors have variety of OM2, OM3
and OS1
Adaptors are available in Duplex and
Simplex
Extended Warranty
SPECIFICATIONS
PERFORMANCE
• Operating Temperature
-30ºC to 75ºC
__________________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
__________________________________________________________________________________
• Sleeve
Ceramic or Bronze
__________________________________________________________________________________
• Operating Wavelength
1200 ~ 1600 nm
__________________________________________________________________________________
• Insertion loss (dB)
SM <=0.2
__________________________________________________________________________________
• Insertion loss (dB)
MM <=0.3
__________________________________________________________________________________
• Return loss (dB)
SM (PC) >=50C.2
__________________________________________________________________________________
• Return loss (dB)
SM (APC) >=60
__________________________________________________________________________________
• Exchangeability (dB)
<=0.2
__________________________________________________________________________________
• Repeatability (dB)
<=0.2
__________________________________________________________________________________
• Durability (dB)
<= 0.2 typical change, 1,000 mating
__________________________________________________________________________________
• RoHS compliant
Companion Products
Consider these related Infilink products
in your network planning
•
•
•
•
•
•
Infilink FO cables
Infilink FO connectors
Infilink FO patch cords
Infilink FO pigtails
Infilink FO patch panels
Infilink MPO solution
ORDER CODES
Infilink FO Adaptor SC/PC, SM, 9/125, Duplex
IP-FA932
_____________________________________________________________________________________
Infilink FO Adaptor SC/PC, MM, 50/125, Duplex
IP-FA532
_____________________________________________________________________________________
Infilink FO Adaptor LC/PC, SM, 9/125, Duplex
IP-FA902
_____________________________________________________________________________________
Infilink FO Adaptor LC/PC, MM, 50/125, Duplex,
IP-FA502
All Infilink FO cables comes with
separate OTDR test report
44
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Fiber Optic
Patch Cord Assemblies
Connectors and
Outlets
Infilink’s top quality, high-speed Duplex Fiber Optic Patch
Cables will unleash the power of your telecommunications
system. With ceramic ferrules, these patch cords are
suitable for high-speed, high-bandwidth telecommunications such that you would find in any data transmissions
with high QoS values. The patch cords operate at the 850
and 1330 nm transmission windows for multimode, and
1310 nm or 1550 nm transmission windows for single
mode applications. Each Optical Fiber Patch Cord is
constructed of the finest components and shipped in
individually sealed bags to ensure that they arrive in perfect
condition. Test results for the individual patch cables are
included in each bag. Color coded patch cords, as well as
polarity tags at each end assist with identification during
the installation process to make installation easy for
anyone. The patch cords are offered in SC-SC, LC-LC, and
SC-LC varieties for both single mode and multimode
applications.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Infilink Optical Fiber Patch cords features:
Fiber Optic
Accessories
Key Features
•
•
•
•
Companion Products
Infilink FO cables
Infilink FO adapters
Infilink FO pigtails
Infilink FO connectors
Infilink FO patch panels
ORDER CODES
Infilink FO Patch Cord LC/PC-LC/PC, SM 9/125, Duplex, 3.0mm, yellow, 1m
IP-FC9051
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-LC/PC, MM 50/125, Duplex, 3.0mm, orange, 1m
IP-FC5101
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-LC/PC, SM 9/125, Duplex, 3.0mm, yellow, 1m
IP-FC9011
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-SC/PC, SM 9/125, Duplex, 3.0mm, yellow, 1m
IP-FC9031
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-SC/PC, MM 50/125, Duplex, 3.0mm, orange, 1m
IP-FC5031
_____________________________________________________________________________________
Infilink FO Patch Cord LC/PC-LC/PC, MM 50/125, Duplex, 3.0mm, orange, 1m
IP-FC5051
_____________________________________________________________________________________
Infilink FO Patch Cord LC/PC-LC/PC, SM 9/125, Duplex, 3.0mm, yellow, 3m
IP-FC9053
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-LC/PC, MM 50/125, Duplex, 3.0mm, orange, 3m
IP-FC5103
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-LC/PC, SM 9/125, Duplex, 3.0mm, yellow, 3m
IP-FC9013
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-SC/PC, SM 9/125, Duplex, 3.0mm, yellow, 3m
IP-FC9033
_____________________________________________________________________________________
Infilink FO Patch Cord SC/PC-SC/PC, MM 50/125, Duplex, 3.0mm, orange, 3m
IP-FC5033
_____________________________________________________________________________________
Infilink FO Patch Cord LC/PC-LC/PC, MM 50/125, Duplex, 3.0mm, orange, 3m
IP-FC5053
45
Glossary
www.InfilinkTechnologies.com
• Operating Temperature
-30ºC to 75ºC
_______________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
_______________________________________________________________________________
• Insertion loss (dB)
SM <=0.2
_______________________________________________________________________________
• Insertion loss (dB)
MM<=0.3
_______________________________________________________________________________
• Return loss (dB)
SM (PC) >=50C.2
_______________________________________________________________________________
• Return loss (dB)
SM (APC) >=60
_____________________________________________________________________________________
• Exchangeability (dB)
<=0.2
_____________________________________________________________________________________
• Repeatability (dB)
<=0.2
_____________________________________________________________________________________
• Durability (dB)
<= 0.2 typical change, 1,000 mating
Tools
•
•
•
•
•
PERFORMANCE
Data Center
Solutions
Consider these related Infilink
products in your network planning:
SPECIFICATIONS
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
Every single Patch Cord has been
tested and comes with a test result
All Patch Cords are available in PC or
APC types
All Patch Cords are available in
different lengths
Patch Cords available in different type
of connectors SC, LC, ST, FC MTRJ
Patch Cords have variety of OM2,
OM3 and OS1
Extended Warranty
Fiber Optics
Cable assemblies
•
Fiber Optic Cables
(OM2, OM3, OS1)
Core Diameter: 50/125, 62.5/125, and 9/125 micron
Insertion loss: typically <0.10 dB (LC); 0.20 dB (SC)
Return loss: >20dB
Ceramic Ferrules for increased durability
TIA/EIA-568-B.3 compliant
Connectors: (LC) Small form factor with latch; (SC) Small form factor
Used primarily for high-speed data communications such as Gigabit, or 10 Gbps Ethernet
Physical Contact: PC (Polished Connector), APC (Angled Polished Connector
Copper Patch
Panels
•
•
•
•
•
•
•
•
Fiber Optic Pigtails
Infilink’s high performance fiber optic pigtails, including
the single mode and multimode types, are manufactured
with premium grade connectors with typical 0.9mm outer
diameter cables and are offered in the Simplex form. The
pigtails are the most important part any fiber link as they
are used to connect the cable to the active equipment
within the patch panel. The fusion splice on the pigtail is
the most economical way to provide a premium quality
fiber optic connection. The fiber optic pigtail connectors
are compliant with IEC and TIA/EIA specifications. It has
one-piece construction and pull-proof design. Low cost
but high performance, which makes it one of the most
popular cables. Infilink Pigtails are supplied in the single
mode 9/125, multimode 50/125 , multimode 10Gb 50/125
types. They come with PC, UPC, and APC connectors
respectively.
Key Features
•
•
•
•
•
•
Every single Pigtail has been tested
and comes with a test result
All Pigtails are available in PC or
APC types
All Pigtails are available in different
lengths
Pigtails available in different type of
connectors SC, LC, ST, FC, MTRJ,..
Pigtails have variety of OM2, OM3
and OS1
Extended Warranty
Companion Products
Consider these related Infilink products
in your network planning
•
•
•
•
•
Infilink FO cables
Infilink FO adapters
Infilink FO pigtails
Infilink FO connectors
Infilink FO patch panels
Fiber optic pigtail features:
• Compliance with Telcordia, ANSI, IEC, TIA/EIA
specifications
• Low insertion loss & back reflection
• One-piece construction & pull-proof design
• Free-floating ceramic ferrule
• Corrosion-resistant body
• UL-rated plastic housing and boots in a variety
of colors
SPECIFICATIONS
PERFORMANCE
• Operating Temperature
-30ºC to 75ºC
__________________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
__________________________________________________________________________________
• Insertion loss (dB)
SM <=0.2
__________________________________________________________________________________
• Insertion loss (dB)
MM <=0.3
__________________________________________________________________________________
• Return loss (dB)
SM (PC) >=50C.2
__________________________________________________________________________________
• Return loss (dB)
SM (APC) >=60
__________________________________________________________________________________
• Exchangeability (dB)
<=0.2
__________________________________________________________________________________
• Repeatability (dB)
<=0.2
__________________________________________________________________________________
• Durability (dB)
<= 0.2 typical change, 1,000 mating
ORDER CODES
Infilink FO Pigtail SC/PC, SM 9/125, 0.9mm jacket, 1m
IP-PF931
_____________________________________________________________________________________
Infilink FO Pigtail SC/PC, MM 50/125, 0.9mm jacket, 1m
IP-PF531
_____________________________________________________________________________________
Infilink FO Pigtail LC/PC, SM 9/125, 0.9mm jacket, 1m
IP-PF901
_____________________________________________________________________________________
Infilink FO Pigtail LC/PC, MM 50/125, 0.9mm jacket, 1m
IP-PF501
46
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Fiber Optic Patch Panels
Connectors and
Outlets
Infilink’s Rack Mount Fiber Enclosures are designed to
provide optimal protection for any fiber optic applications.
The enclosures are suited for 19" wide racks, and come in
a powder-coated steel design with an integrated latching
system. Each enclosure includes cable routing spools
and splice trays. Included with the enclosures are zip ties,
cable routing clamps, mounting screws, fiber splice
sleeves and installation instructions, and are offered in SC
and LC 12, 24,48 & 96 links varieties.
Fiber optic patch panel features:
• fully loaded with single mode or multimode
Couplers
• fully loaded with single mode or multimode
pigtail in SC, LC, or APC varieities
• Insertion loss: typically <0.10 dB (LC); 0.20 dB (SC)
• Return loss: >20dB
• TIA/EIA-568-B.3 compliant
• Used primarily for high-speed data communications
such as Gigabit, or 10 Gbps Ethernet
• Power-coated steel
• Oven-baked finish
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
•
Companion Products
SPECIFICATIONS
PERFORMANCE
• Operating Temperature
-30ºC to 75ºC
_______________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
Infilink FO cables
Infilink FO connectors
Infilink FO patch cords
Infilink FO pigtails
Infilink FO adaptors
Infilink MPO solution
Infilink FO Patch Panel [Black] 12SC Duplex 9/125 with Pigtail
IP-FT932B
_____________________________________________________________________________________
Infilink FO Patch Panel [Black] 24SC Simplex 9/125 with Pigtail
IP-FT931B
_____________________________________________________________________________________
Infilink FO Patch Panel [Black] 12LC Duplex 9/125 with Pigtail
IP-FT902B
_____________________________________________________________________________________
IInfilink FO Patch Panel [Black] 24LC Duplex 9/125 with Pigtail
IP-FT904B
_____________________________________________________________________________________
Infilink FO Patch Panel [Black] 12SC Duplex 50/125 with Pigtail
IP-FT532B
_____________________________________________________________________________________
Infilink FO Patch Panel [Black] 12LC Duplex 50/125 with Pigtail
IP-FT502B
_____________________________________________________________________________________
Infilink FO Patch Panel [Black] Unloaded 12SC Duplex slide out
IP-FT5005
47
5
Glossary
www.InfilinkTechnologies.com
ORDER CODES
Tools
•
•
•
•
•
•
Data Center
Solutions
Consider these related Infilink
products in your network planning:
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
19 inch rack, cabinets mountable
Patch Panels are available in different
type of adaptors SC, LC, ST, FC,..
Patch Panels have variety of OM2,
OM3 and OS1
Patch Panels are available in Duplex
and Simplex
Patch Panels can be unloaded or fully
loaded with adaptors, pigtails and
cassettes
Application: Telecommunications
subscribers loop, Fiber to The Home,
LAN/WAN, CATV
Fiber Optics
Cable assemblies
•
•
Material: Steel housing with powder coated epoxy, black color or any customized color
Slide Type, Easily pull out without dismantlement from Rack
Splice Tray up to 24 splicing per tray
Rear section accommodates cable entry and holder
Adaptor panel for ease of installation, inspection and testing
Available in different sizes:
- 12 or 24 port(1U)
- 36 or 48 ports (2U)
- 60 to 72 ports(3U)
- 96 ports(4U)
Fiber Optic
Accessories
Key Features
•
•
•
•
•
•
Networking Cabinets
42U Networking Cabinet
Product Information
• Elegant look, profound technical expertise, precise dimension,
add value to your projects
• Easy-to-fix concentrated distribution unit into frame
• Popular front door made with smoky gray color toughened glass
• Install caster and support feet at the same time
• Strong structure with 800kg max loading
• Wire path on the top and bottom can be closed, and wire holes
dimension can be changed as request
• Optional bottom seat for stable stand, bottom wiring and
bottom cold ventilation
• Side door and rear/front door can be taken down easily
Product Specifications
• steel frame vented front door rear door accelerate the
Convection inside
• Smoked plexiglas front door, color is optional
• Removable side panels
• Leveling feet or castors
• Max. Static load: 800 kg
• Max. Dynamic load: 350 kg
• Width: 600, 800 mm
• Depth: 600, 800 mm
Key Features
•
•
•
19” Standard Installation
Side doors with locks
Various optional accessories
9U Networking Cabinet
Product Information
Companion Products
Consider these related Infilink
products in your network planning:
•
•
•
•
Networking Cabinet- 16U
Networking Cabinet- 12U
Networking Cabinet- 4U
Networking Cabinet Accessories
Order Code
IP-NC21A, IP-NC22A,
IP-NC42A, IP-NC9001A,
IP-NC9002A, IP-NC9009A,
IP-NC9012A, IP-NC9016A,
IP-NC9027A
•
•
•
•
•
•
Frame structure, max loading of 60 kg
Quick-open side door easy to install and
maintain
Top and bottom wire path
Wall and stand installation type
Optional caster and support feet for
stand installing
Quick wall mounting
Product Specifications
•
•
•
•
•
Double-section structure
Removable side door-for easy installing and maintaining
Optional cable entrances through top and bottom plates
Cooling fans can be installed for special requirements
Thickness: Mounting Rails 2.0mm, others 1.2mm
Contact our distributer for NC part numbers.
48
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Networking Accessories
Connectors and
Outlets
IP-NC1508
Copper Shielded
Twisted Pair
Cables
IP-NC1P
IP-DFJ021
Copper Cable
Assemblies
IP-NC1503
Copper UTP
Cables
IP-NC100B
IP-NC120B
IP-NC140B
IP-NC1504
Copper Patch
Panels
IP-NC1501
IP-NC1502
Fiber Optic
Accessories
Key Features
All trays are 19” Standard
High quality finishing
Fiber Optics
Cable assemblies
•
•
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
Companion Products
Consider these related Infilink products
in your network planning
IP-NC220A/IP-NC110A
Networking Cabinet - 42U
Networking Cabinet - 27U
Networking Cabinet - 16U
Networking Cabinet - 12U
Networking Cabinet - 9U
Networking Cabinet - 4U
Data Center
Solutions
•
•
•
•
•
•
Fiber Optic Cables
(OM2, OM3, OS1)
IP-DFJ022
Tools
IP-NC6P01
49
IP-NC6P03
Glossary
www.InfilinkTechnologies.com
IP-NC6P02
MPO Cassettes
®
Infilink manufacture's state of the art MPO fiber optic
cassettes that are composed a high-density
preterminated fiber optic system designed exclusively for
Data Centers, storage area networks, and local area
networks. Infilink's Fiber Optic Plug and Play (PnP)
cassettes are designed with pre-terminated fiber and
multi-fiber Plug-in Connectors (MPO). This allows the
quick addition of new devices in a computerized system,
without the need for reconfiguration or manual installation
of other external devices. Internally, each fiber is routed
and connected within the cassette to its appropriate port
on the front end of the unit. Using Infilink's fiber cassettes
enable the end user to save significant amounts of time.
Infilink Cassettes are offered in OM2 (50/125), OM3
(50/125) & Singlemode OS1 (9/125) models.
Key Features
•
•
•
•
•
•
•
Small, compact with high density
Future Proof for 10G applications
Fast deployment saves cost of
installation
Application: Data Centers and critical
environments
High density up to 24 FO cores in
each cassette
No need splice, cleave, polish
Extended Warranty
Companion Products
Infilink Optical Fiber MPO Cassettes offer:
• Low insertion loss
• No polishing (Pre-terminated)
• High return loss (low amounts of reflection
at the interface)
• Ease of installation
• Reliable
• Low environmental sensitivity
• Plug and Play
• Material: Steel housing with powder coated epoxy,
black color or any customized color
• Easily can be affixed to Infilink MPO® patch panels
• Factory terminated and tested
• Available with 12 or 24 LC or SC connectors
SPECIFICATIONS
PERFORMANCE
• Operating Temperature
-30ºC to 75ºC
__________________________________________________________________________________
-40ºC to 85ºC
• Storage Temperature
Infilink MPO® CASSETTE ORDER CODES
IP - MPC -
Consider these related Infilink
products in your network planning:
•
•
•
•
•
•
•
Channel Count
Infilink FO cables
Infilink FO connectors
Infilink FO patch cords
Infilink FO pigtails
Infilink FO adaptors
Infilink MPO® Patch Panels
Infilink MPO® trunk cable
2 - 12 Fiber
4 - 24 fiber
Fiber Type
5 - 50/125
9 - 9/125
O - OM3
Connector Type
50
LCU
LCA
SCU
SCA
www.InfilinkTechnologies.com
Company
Profile
MPO Trunk & Fanout Cables
®
Voice-Telephone
System
Connectors and
Outlets
Infilink’s MPO cable utilizes push-pull connector
housings for quick and reliable connections. The Single
Mode and Multimode low-loss is achieved by using more
precise MT 8-fiber ferrules and guide pins. The superior
precision of the ferrule yields comparable insertion loss
values to those found in standard ceramic ferrules.
Infilink's MPO connectors meet IEC and TIA/EIA
standards and are ideal for mission-critical environments
such as Data Centers. MPO Cables are offered in various
lengths in the form of OS1, OM2, and OM3 types.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
Copper Patch
Panels
•
•
•
Companion Products
Infilink FO cables
Infilink FO connectors
Infilink FO patch cords
Infilink FO pigtails
Infilink FO adaptors
Infilink MPO® Patch Panels
Infilink MPO® Cassettes
Insertion Loss
≤0.2dB
≤0.25dB
_______________________________________________________________________________
Return Loss
≥50dB (PC)
_______________________________________________________________________________
Repeatability
≤0.1
_______________________________________________________________________________
Durability
≤0.2dB typical change 1000 mating
_______________________________________________________________________________
Interchangeability
≤0.2dB
_______________________________________________________________________________
Tensile Strength
>10Kg
SPECIFICATIONS
PERFORMANCE
• Operating Temperature
-40ºC to 85ºC
_______________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
Connector Code
Fiber Type
Fiber Number
Length(M)
Male
Female
9/125 um (SM)
50/125 um (MM)
4-fiber
8-fiber
12-fiber
16-fiber
24-fiber
customized
51
5
Glossary
www.InfilinkTechnologies.com
MULTI MODE
Tools
•
•
•
•
•
•
•
SINGLE MODE
Data Center
Solutions
Consider these related Infilink
products in your network planning:
SPECIFICATIONS
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
Fiber Optics
Cable assemblies
•
•
Various Fiber numbers & types are
available
Future Proof for 10G applications
Fast deployment saves cost of
installation
Application: Data Centers and critical
environments
High density up to 24 FO cores in
each Trunk Cable or fanout
No need splice, cleave, polish
Extended Warranty
Fiber Optic
Accessories
•
Fiber Optic Cables
(OM2, OM3, OS1)
Key Features
Infilink Optical Fiber MPO cables:
• Low insertion loss
• High return loss (low amounts of reflection
at the interface)
• Ease of installation
• Plug and Play
• High Reliability
• Low environmental sensitivity
• Ease of use
• High Temperature Stability
• Quickly Exchangeable
MPO Patch Panel
®
Infilink’s Rack Mount MPO Fiber Enclosures are
designed to provide optimal protection for any fiber optic
applications. The enclosures are suited for 19" wide
racks, and come in a powder-coated steel design with an
integrated latching system. Each enclosure can support
up to 3 MPO Cassettes, which can be locked into place
without the need to access the Enclosure from back side
of rack.
Front Cassettes snap mechanism allows IT managers the
flexibility to add and remove cassettes easily, which saves
valuable Data Center availability and uptime.
Key Features
•
•
•
•
•
•
•
Small, compact with high density
Future Proof for 10G applications
Fast deployment saves cost of
installation
Application: Data Centers and critical
environments
High density up to 24 FO cores in
each cassette
No need splice, cleave, polish
Extended Warranty
Fiber optic patch panel features:
• Powder-coat steel
• Oven baked finish
• Support of 72 Fiber links in 1U
• Used primarily for high speed data communications
such as Gigabit, or 10 Gbps Ethernet
• Front Cassette Snap mechanism
• Material: Steel housing with powder-coated epoxy,
black or any customized color
• Slide Type, Easily pull out without dismantling from Rack
• Rear section accommodates cable entry and holder
• Adaptor panel (cassette) for ease of installation and inspection
• Accommodates three Infilink MPO cassettes in 1U
Companion Products
Consider these related Infilink
products in your network planning:
•
•
•
•
•
•
•
Infilink FO cables
Infilink FO connectors
Infilink FO patch cords
Infilink FO pigtails
Infilink FO adaptors
Infilink MPO® Cassettes
Infilink MPO® trunk cable
SPECIFICATIONS
PERFORMANCE
• Operating Temperature
-30ºC to 75ºC
__________________________________________________________________________________
• Storage Temperature
-40ºC to 85ºC
ORDER CODES
Infilink MPO Patch Panel [Black] accommodates 3 Cassettes
52
IP-PPMPO3C
www.InfilinkTechnologies.com
Company
Profile
Voice-Telephone
System
Crimping and Punch Down Tool
Connectors and
Outlets
The high performance Crimping Tool, for Networking
and Telephony Applications
Termination Tools are the essential instruments any field
support installers look forward to. They are highly
compact and serve a multitude of purposes. All the tools
are heavy duty and can sustain extensive use in the field.
For your variety of network needs, the Infilink Crimping
Tool is a tool specifically designed to maintain network
accessories. Our professional crimp tool IP-CT001
crimps, strips, and cuts cable for 6 and 8 position modular
plugs. The crimp tool offers a reliable, easy-to-use, and
affordable solution to meet immediate cutting needs. Our
professional ratchet crimp tool delivers convenience at a
very economical price and is designed to be used with
8P8C/RJ-45, 6P6C/RJ-12 and 6P4C/RJ-11 connectors.
Copper UTP
Cables
Copper Shielded
Twisted Pair
Cables
Copper Cable
Assemblies
•
•
SPECIFICATIONS
PERFORMANCE
PHYSICAL
____________________________________________________________________________________
• Body
7 ½” Steel Construction
____________________________________________________________________________________
• Mechanism
Ratchet
___________________________________________________________________________________
• Cable range
22 – 26 AWG round or Flat
Fiber Optic Cables
(OM2, OM3, OS1)
•
•
Single tool for Strip, Cut and
Crimping of Connectors
Heavy duty Steel construction
Ideal for Networking and IP
Telephony applications
Extended Warranty
Copper Patch
Panels
Key Features
Fiber Optic
Accessories
•
•
Companion Products
Infilink RJ-45 Connectors
Infilink patch panels
Infilink CAT-5e & 6 Cables
Infilink faceplates
Infilink Wall Boxes
Infilink Keystone Jacks
Infilink CAT-6 Connectivity
ORDER CODES
Infilink-Crimping Tool
IP-CT001
____________________________________________________________________________________
Infilink-Impact variable speed punch down tool with 110 blade
IP-PD001
53
5
Glossary
www.InfilinkTechnologies.com
PERFORMANCE
PHYSICAL
7 ½” Steel Construction
• Body
_____________________________________________________________________________________
Replaceable steel 110 type
• Blade
___________________________________________________________________________________
Variable (Hi – Low)
• Impact
Tools
•
•
•
•
•
•
•
SPECIFICATIONS
Data Center
Solutions
Consider these related Infilink products
in your network planning
Infilink Termination Tools are the essential instruments any field
support installer, looks forward to. They are highly compact
and serve multitude of purposes. All the tools are
heavy duty and can sustain extensive use in
the field. Infilink professional punch down
tool, TC-PD001 with 110 blades, inserts
and cuts terminations in one operation.
Adjustable high and low actuation
setting accommodates termination requirements or user preference.
With spare storage that helps prevent blade loss, the precision blades
are conveniently interchangeable. The punch down tool offers reliable,
easy-to-use operation at an affordable prices.
Networking
Fiber Optic Patch
Cabinets & Cable
panels and
management
enclosures
•
•
Two Position high and low impact
for better connectivity
All Steel replaceable blade
Ideal for Networking and IP
Telephony applications
Extended Warranty
Fiber Optics
Cable assemblies
Key Features
The high performance Punch Down Tool for onsite
termination applications
Glossary
Part Number
Page No.
Part Number
Page No.
IE-CCA6
19
_______________________________________
IP-BC-B
15
_______________________________________
IP-FPAMS1
16
_______________________________________
IP-FPBS1P
17
_______________________________________
IP-BC-R
15
_______________________________________
IP-BC-Y
15
_______________________________________
IP-FR29C2
37
_______________________________________
IP-FR29X1
35
_______________________________________
IP-BC-GR
15
_______________________________________
IP-BC-GY
15
_______________________________________
IP-CFF6A
24
_______________________________________
IP-CSF5e
22
_______________________________________
IP-CSF6
23
_______________________________________
IP-CT001
53
_______________________________________
IP-CU3P25
6
_______________________________________
IP-CU3P50
6
_______________________________________
IP-CU3P100
6
_______________________________________
IP-CU5ePS
20
_______________________________________
IP-CU6P
21
_______________________________________
IP-FA502
44
_______________________________________
IP-FA532
44
_______________________________________
IP-FA902
44
_______________________________________
IP-FA932
44
_______________________________________
IP-FC5031
45
_______________________________________
IP-FC5033
45
_______________________________________
IP-FC5051
45
_______________________________________
IP-FC5053
45
_______________________________________
IP-FC5101
45
_______________________________________
IP-FC5103
45
_______________________________________
IP-FC9011
45
_______________________________________
IP-FC9013
45
_______________________________________
IP-FC9031
45
_______________________________________
IP-FC9033
45
_______________________________________
IP-FC9051
45
_______________________________________
IP-FC9053
45
_______________________________________
IP-FN501
43
_______________________________________
IP-FN531
43
_______________________________________
IP-FN901
43
_______________________________________
IP-FN931
43
_______________________________________
IP-FPAM1P
16
_______________________________________
IP-FPAM2P
16
_______________________________________
IP-FPAMB1
16
54
IP-FPBS2P
17
_______________________________________
IP-FR29C1
37
_______________________________________
IP-FR29X2
35
_______________________________________
IP-FR29Y1
36
_______________________________________
IP-FR29Y2
36
_______________________________________
IP-FR51X(X) (x)= 4-48 cords
38
_______________________________________
IP-FR51Y(X) (x)= 4-48 cords
38
_______________________________________
IP-FR91Y(X) (x)= 4-48 cords
38
_______________________________________
IP-FR98X12-1
39
_______________________________________
IP-FR98X12-2
39
_______________________________________
IP-FR99Y12-1
40
_______________________________________
IP-FR99Y12-2
40
_______________________________________
IP-FRX924 P
41
_______________________________________
IP-FRX924 L
41
_______________________________________
IP-FT5005
47
_______________________________________
IP-FT502B
47
_______________________________________
IP-FT532B
47
_______________________________________
IP-FT902B
47
_______________________________________
IP-FT904B
47
_______________________________________
IP-FT931B
47
_______________________________________
IP-FT932B
47
_______________________________________
IP-KS51
8
_______________________________________
IP-KS51-W1
9
_______________________________________
IP-KS6
11
_______________________________________
IP-KS6-180
12
_______________________________________
IP-KS6S
13
_______________________________________
IP-KS6AS
14
_______________________________________
IP-KS6-W1
10
_______________________________________
IP-MBX01
18
_______________________________________
IP-NC100B
49
_______________________________________
IP-NC110A
49
_______________________________________
IP-DFJ021
49
_______________________________________
IP-DFJ022
49
Page No.
Part Number
Page No.
IP-NC120B
49
_______________________________________
IP-NC140B
49
_______________________________________
IP-PC603GY
26
_______________________________________
IP-PC605GY
26
_______________________________________
IP-NC1503
49
_______________________________________
IP-PC610GY
26
_______________________________________
IP-PC610W
26
_______________________________________
IP-NC1501
49
_______________________________________
IP-NC1502
49
_______________________________________
IP-NC1504
49
_______________________________________
IP-NC1508
49
_______________________________________
IP-NC1P
49
_______________________________________
_______________________________________
IP-NC220A
49
_______________________________________
IP-NC42A
48
_______________________________________
IP-NC6P01
49
_______________________________________
IP-NC6P02
49
_______________________________________
IP-NC6P03
49
_______________________________________
IP-NC9001A
48
_______________________________________
IP-NC9002A
48
_______________________________________
IP-NC9009A
48
_______________________________________
IP-NC9012A
48
_______________________________________
IP-NC9016A
48
_______________________________________
IP-NC9027A
48
_______________________________________
IP-NC21A
48
_______________________________________
IP-NC22A
48
_______________________________________
IP-PC505BK
25
_______________________________________
IP-PC505GY
25
_______________________________________
IP-PC510B
25
_______________________________________
IP-PC510GR
25
_______________________________________
IP-PC510GY
25
_______________________________________
IP-PC510R
25
_______________________________________
IP-PC510Y
25
_______________________________________
IP-PC511GY
25
_______________________________________
IP-PC520B
25
_______________________________________
IP-PC520GR
25
_______________________________________
IP-PC520GY
25
_______________________________________
IP-PC520R
25
_______________________________________
IP-PC520Y
25
_______________________________________
IP-PC530B
25
_______________________________________
IP-PC530GR
25
_______________________________________
IP-PC530GY
25
_______________________________________
IP-PC530R
25
_______________________________________
IP-PC530Y
25
_______________________________________
IP-PC550GY
25
IP-PC610AY
28
_______________________________________
IP-PC610BK
26
_______________________________________
IP-PC611GY
26
_______________________________________
IP-PC620AY
28
_______________________________________
IP-PC620BK
26
_______________________________________
IP-PC620GY
26
_______________________________________
IP-PC620W
26
_______________________________________
IP-PC630AY
28
_______________________________________
IP-PC630BK
26
_______________________________________
IP-PC630GY
26
_______________________________________
IP-PC630W
26
_______________________________________
IP-PC650GY
26
_______________________________________
IP-PCSF605GY
27
_______________________________________
IP-PCSF610GY
27
_______________________________________
IP-PCSF630GY
27
_______________________________________
IP-PCSF650GY
27
_______________________________________
IP-PD001
53
_______________________________________
IP-PF501
46
_______________________________________
IP-PF531
46
_______________________________________
IP-PF901
46
_______________________________________
IP-PF931
46
_______________________________________
IP-PP16
34
_______________________________________
IP-PP325
7
_______________________________________
IP-PP350
7
_______________________________________
IP-PP524S
30
_______________________________________
IP-PP5E16
29
_______________________________________
IP-PP5E24
29
_______________________________________
IP-PP5E48
29
_______________________________________
IP-PP616
31
_______________________________________
IP-PP624
31
_______________________________________
IP-PP624S
32
_______________________________________
IP-PP648
31
_______________________________________
IP-PP6A24S
33
_______________________________________
IP-PPMPO3C
52
_______________________________________
IP-SB5E1L
18
_______________________________________
IP-SERJ45
15
55
Glossary
Part Number
INFILINK TECHNOLOGIES
San Rafael, California, U.S.A., Telephone : +1 (415) 482-6681
E-mail: [email protected]filinkTechnologies.com
www.InfilinkTechnologies.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement