HMS1000E
HMS1000E
1. 6 G H z S p e c t r u m A n a l y z e r
HMS1000E
Comfortable automatic
measurement functions
with up to 8 markers
R Frequency Range 100 kHz…1.6 GHz
R Amplitude Measurement Range -104…+20 dBm
R Sweep Time 20 ms…1000s
R R
esolution Bandwidth 10 kHz…1 MHz in 1–3 Steps, 200 kHz (-3 dB)
1 GHz EMI Near Field Probe
Set HZ530
R Spectral Purity <-100 dBc/Hz (@100 kHz)
R Video Bandwidth 1 kHz…1 MHz in 1–3 Steps
R Integrated AM and FM Demodulator (Phone and int. Speaker)
R Detectors: Auto-, Min-, Max-Peak, Sample, RMS
R 8 Markers with Delta Marker, miscellaneous Peak Functions
Ethernet/USB
Dual-Interface HO730
(Option)
R Crisp 16.5 cm (6.5") TFT VGA Display, DVI Output
R 3
x USB for Mass-Storage, Printer and Remote Control,
optional IEEE-488 (GPIB) or Ethernet/USB Dual-Interface
1.6 GHz Spectrum Analyzer HMS1000E
Firmware: ≥ 2.022
All data valid at 23 °C after 30 minute warm-up.
Frequency
100 kHz…1.6 GHz
Frequency range:
±2 ppm (0…30 °C)
Temperature stability:
±1 ppm/year
Aging:
0 Hz (zero span) and 1 MHz…1.6 GHz
Span setting range:
Spectral purity, SSB phase noise:
100 kHz from carrier <-100 dBc/Hz
(500M Hz, +20…30 °C)
1 MHz from carrier <-120 dBc/Hz
(500MHz, +20…30 °C)
Sweep time:
2 ms…100 s
Span = 0 Hz
20 ms…1,000 s, min. 20 ms/600 MHz
Span > 0 Hz
Resolution bandwidths (-3 dB): 10 kHz…1 MHz in 1–3 steps, 200 kHz
Tolerance
±5 % typ.
≤300kHz
±10 % typ.
1MHz
1 kHz…1 MHz in 1–3 steps
Video bandwidths:
Amplitude
Display range:
Average noise level displayed up to
+20 dBm
Amplitude measurement
Typ. -104…+20 dBm
range:
Max. permissible DC 80 V
at HF input:
20 dBm, 30 dBm for max. 3 Min.
Max. power at HF input:
Intermodulation free range:
TOI products, 2x -20 dBm 66 dB typ.
(-10 dBm ref. level)
(typ. +13 dBm third-order intercept)
(at distance between
signals ≤2 MHz)
60 dB typ. (+10 dBm TOI)
(at distance between
signals >2 MHz)
66 dB typ. (typ. +13 dBm TOI)
DANL (Displayed average noise level):
(RBW 10 kHz, VBW 1 kHz,
ref. level ≤-30 dBm
10 MHz…1.6 GHz)
-95 dBm, typ. -104 dBm
Inherent spurious:
(ref. level ≤-20 dBm,
f >30 MHz, RBW ≤100 kHz) <-80 dBm
Input related spurious:
(Mixer level ≤-40 dBm,
carrier offset >1 MHz)
-70 dBc typ.
2nd harmonic receive frequency:
(mixer level -40 dBm)
-60 dBc typ.
Level display:
-80…+20 dBm in 1 dB steps
Reference level
100 dB, 50 dB, 20 dB, 10 dB
Display range
Logarithmic display
dBm, dBµV, dBmV
scaling
1 curve and 1 memory curve
Measured curves:
A-B (curve-stored curve), B-A
Trace mathematics:
Auto-, Min-, Max-Peak, Sample, RMS,
Detectors:
Average
<1.5 dB, typ. 0.5 dB
Failure of level display:
(ref. level -50 dBm, 20…30 °C)
Marker/Deltamarker
Number of marker:
Marker functions:
Marker displays:
Inputs/Outputs
HF Input:
Input Impedance
VSWR (10 MHz…1.6 GHz)
Trigger input:
Trigger voltage
Ext. reference input/output:
Reference frequency
Essential level (50 Ω)
Supply output for field
probes:
Audio output (Phone):
Demodulation
Miscellaneous
Display:
Save/Recall memory
Trigger
Interfaces:
Power supply:
Power consumption:
Protection class:
Operating temperature:
Storage temperature:
Rel. humidity:
Dimensions (W x H x D):
Weight:
8
Peak, next peak, minimum,
center = marker, frequency,
reference level = marker level,
all marker on peak
Normal (level & log.), delta marker,
noise marker
N socket
50 Ω
<1.5 typ.
BNC female
TTL
BNC females
10 MHz
10 dBm
6 Vdc, max. 100 mA (2.5 mm DIN jack)
3.5 mm DIN jack
AM and FM (internal speaker)
16.5 cm (6.5") TFT Color VGA Display
10 complete device settings
Free run, Single Trigger, external Trigger
Dual-Interface USB/RS-232 (HO720),
USB-Stick (frontside),
USB-Printer (rear side)
DVI-D for ext. monitor
105…253 V, 50…60 Hz, CAT II
Max. 40 W at 230 V, 50 Hz
Safety class I (EN61010-1)
+5…+40 °C
-20…+70 °C
5…80 % (non condensing)
285 x 175 x 220 mm
3.6 kg
Accessories supplied: Line cord, Operating manual, CD, Software
Recommended accessories:
HO730
Dual-Interface Ethernet/USB
HO740
Interface IEEE-488 (GPIB), galvanically isolated
HZ530
Near-Field Probe Set 1 GHz for EMI diagnostics
HZ540/550
Near-Field Probe Set 3 GHz for EMI diagnostics
HZ540L/550L Near-Field Probe Set 3 GHz for EMI diagnostics
HZ13
Interface cable (USB) 1.8 m
HZ14
Interface cable (serial) 1:1
HZ46
4RU 19" Rackmount Kit
HZ72
GPIB-Cable 2 m
HZ99
Carrying Case for protection and transport
HZ520
Plug-in Antenna with BNC connection
HZ525
50 Ω-Termination, N plug
HZ560
Transient limiter
HZ575
75/50 Ω Converter
HMS1000E/E/070613 · C&E · Subject to change without notice · © HAMEG Instruments GmbH® · DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 8000 · Fax +49 (0) 6182 800100 · www.hameg.com · [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement