HP 12C Financial Programmable Calculator, 12c Prestige Financial Calculator, 12c Quick start guide

HP 12C Financial Programmable Calculator, 12c Prestige Financial Calculator, 12c Quick start guide

HP 12c Financial Calculator

Quick Start Guide

Edition 1

HP Part Number:

F2230-90201

Legal Notices

This manual and any examples contained herein are provided "as is" and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability, non-infringement and fitness for a particular purpose.

Hewlett-Packard Company shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples contained herein.

Copyright © 2008 Hewlett-Packard Development Company, L.P.

Reproduction, adaptation, or translation of this manual is prohibited without prior written permission of Hewlett-Packard Company, except as allowed under the copyright laws.

Hewlett-Packard Company

16399 West Bernardo Drive

San Diego, CA 92127-1899

USA

Printing History

Edition 1, October 2008

Table of Contents

Welcome to your HP 12c Financial Calculator ........................... 1

The Keys................................................................................ 1

Customizing the Calculator ...................................................... 2

Storage Registers and Continuous Memory ................................ 7

Reverse Polish Notation (RPN) Mode......................................... 7

Keys and Functions ............................................................... 10

Basic Financial Calculation Example ....................................... 18

Warranty and Contact Information ......................................... 20

Replacing the Batteries .......................................................... 20

HP Limited Hardware Warranty and Customer Care................. 20

Limited Hardware Warranty Period ........................................ 21

General Terms ..................................................................... 21

Customer Care..................................................................... 23

Product Regulatory & Environment Information.......................... 28

Contents

Contents

1 Getting Started

Welcome to your HP 12c Financial Calculator

This booklet is intended to get you started quickly with the basic features of your 12c Financial Calculator. Use it for quick reference. For more detailed information about the 12c Financial Calculator, refer to the

HP

12c Financial Calculator User’s Guide

. Pages of the user’s guide are cited throughout this manual, and it is highly recommended you refer to the user’s guide to thoroughly familiarize yourself with the many features of your calculator.

The Keys

Many keys on the HP12c Financial Calculator perform more than one function. The primary function of a key is indicated by the characters printed in white on the upper face of the key. The alternate function(s) of a key are indicated by the characters printed in gold above the key and the characters printed in blue on the lower face of the key. See Figure 1.

Figure 1

To specify the primary function printed on the upperface of a key, press the key alone.

To specify the alternate function printed in gold above a key, press the gold prefix key function key.

(

T

)

, then press the

To specify the alternate function printed in blue on the lower face of a key, press the blue prefix key press the function key.

(

U

)

, then

Pressing the

T

or

U prefix key turns on the corresponding status indicator — f or g — in the display. After a function key is pressed, the indicator turns off. Note how function keys for bonds, depreciation, and clearing are grouped together under brackets printed above the keys in gold. Unless otherwise indicated, press and release the desired key, or key combination in order from left to right. You do not need to press and hold the keys as with a computer or typewriter.

There are a total of six status indicators that appear along the bottom of the display and signify the status of the calculator for certain operations. When applicable, the descriptions below identify when an indicator appears on screen.

In this manual, the highlighted portion of the key symbol or symbols represents the active function of the key. Functions above the keys are spelled out and preceded by the

T

function key.

Customizing the Calculator

Table 1-1 lists some of the basic functions available for customizing the

calculator. The pages of the

HP 12c Financial Calculator User’s Guide

2 Getting Started

are included for reference. Refer to these pages of the user’s guide for more information.

Table 1-1 Basic Functions

Functions Display/Description

Turn calculator on/off

(page 16) .

Number display format

(page 71)

.

Turns calculator on. Pressing

S

again turns the calculator off. The calculator turns off automatically 8 to 17 minutes after it was last used. The low battery symbol (

*

) appears when battery power is nearly exhausted. Refer to the section below titled,

Replacing the Batteries

for instructions on replacing the batteries.

Press and release

T followed by a number 0-9 to specify the number of digits displayed to the right of the decimal point. The default setting is two places to the right of the decimal point.

Table 1-1 Basic Functions

Functions Display/Description

Digit separator

(page 17) .

Payment mode

(page 37) .

1. The default separator is a comma (see above).

2. Turn the calculator off first by pressing

S

.

3. Press and hold to a point.

.

and then press and release

S to change the digit separator from a comma

4. Perform the same steps again to change the point to a comma.

Press

Ug

to set the payment mode for cash flow problems. Use Begin mode for payments occurring at the beginning of the compounding period. Note the

“BEGIN” indicator appears.

Press

Uh for payments occurring at the end of the compounding period. End mode is the default setting.

4 Getting Started

Table 1-1 Basic Functions

Functions Display/Description

Calendar format. Monthday-year

(M.DY) or daymonth-year

(D.MY)

(pages 29-31,

175, and 187) .

Press

Uq

or

Up

to set the date format.

The default setting is M.DY. The screen above shows

December 3, 2010 in M.DY format.

1. Press

Uq

.

2. Key in one or two digits for the month.

3. Press

.

.

4. Key in two digits for the day.

5. Key in four digits for the year.

6. Note: at this point, pressing

R displays the date in the selected number display format.

1. For day-month-year, press

Up

. Note the

“D.MY” indicator appears (see above).

2. Key in one or two digits for the day.

3. Press

.

.

4. Key in two digits for the month.

5. Key in four digits for the year. Press

R

.

Table 1-1 Basic Functions

Functions Display/Description

Compound interest (pages

39-53, 186) .

Press

V L

followed by dates separated by

R to specify the compound interest option for odd- period calculations of interest (i), Present Value (PV),

Payment (PMT), and Future Value (FV). Note the “C” indicator appears. The default setting performs calculations for PV, PMT, and FV using simple interest. Press

V L

again to return to the default setting.

Program mode

(page 88) .

Press

T

P/R to set the calculator to Program mode.

When the calculator is in Program mode, functions are not executed when they are keyed in, but instead are stored inside the calculator. Note the “PRGM” indicator appears.

Press

T

P/R again to exit Program mode. See page 88 of the

HP 12c Financial Calculator User’s

Guide

for more information on programming basics.

6 Getting Started

Storage Registers and Continuous Memory

Numbers (data) are stored in memories called “registers.” Special registers are used for storing numbers during calculations, the “stack” registers, and the “Last X” register, which is used for storing the last number in the display before operations are performed in RPN mode. Numbers are stored automatically in these registers. There are also registers in which you can manually store data, designated R

0

through R

9

, R

.

0 through R

.

9

, and financial registers used for financial calculations. All these storage registers make up the calculator’s Continuous memory. All information in the Continuous memory is preserved even while the calculator is turned off. To reset the memory and clear all of the registers and return the calculator’s settings to their defaults, turn the calculator off, and while holding down

Z

, press

S

. With “

Pr Error”

displayed, press any key to return to the default calculator screen.

Reverse Polish Notation (RPN) Mode

The following information is a brief overview of how RPN works. For more detailed information about RPN and how the stack works, refer to the

HP 12c Financial Calculator User’s Guide

. In RPN mode, numbers are entered first, separated by pressing

R

, followed by an operation key. Pressing

R

is optional after entering a number, if the next key pressed is an operation.

Each time you press an operation or function key in RPN, the answer is calculated immediately and displayed. For example, suppose you wanted to add two numbers in RPN, 1 and 2. Press

1 R 2 ;

.

The result, 3.00, is calculated and displayed immediately.

There are four special registers used for storing numbers during calculations, which are stacked on top of one another. Called “the stack,” these registers are designated

X,Y, Z,

and

T

. X is on the bottom, and T is on the top. Unless the calculator is in Program mode, the number in the display is the number in the X-register. Primarily, the numbers in the X- and

Y-registers are the numbers used in calculations. The Z and T registers are used for the automatic retention of intermediate results during chain calculations.

The

R

key separates numbers in the vertical stack and positions them in the X- and Y-registers, and, in addition to displaying intermediate results, this vertical arrangement of the stack allows you to copy and rearrange numbers without reentering them. For more complex problems requiring two or more operations, you do not need to enter parentheses to set operational priority. Key in numbers and operations inside the parentheses first, followed by those outside of the parentheses. If a problem has more than one set of parentheses, start by working with the operations and numbers in the innermost parentheses and work out.

For example, in RPN mode calculate

(

3

+

4

) (

5

+

6

)

. See

Table 1-2. Although this is a simple example, you can use the principles

introduced here when working with more complex problems.

8 Getting Started

Table 1-2 RPN Example

Keys

3 R 4

;

Display/Description

5 R 6 ;

Enters numbers and operation from the first set of parentheses. The sum, 7, is displayed and stored in the X-register.

Enters the numbers and operation from the second set of parentheses. The sum, 11, is stored in the Xregister and displayed, and 7 moves up to the Yregister.

*

Finishes the operation and displays the results.

Stores 77 in the X-register.

Keys used to rearrange the stack:

Pressing the

P

key exchanges the numbers in the

X-and Y-registers

(pages 74 and 172)

.

Pressing the

O

key performs a

roll down

of the stack, where each number in the registers is copied into the register below, and the number formerly in the X-register is copied into the T-register

(page 172)

.

Pressing

U r recalls the number displayed before the previous operation back into the displayed X-register.

(pages 74 and 176)

.

Keys and Functions

Table 1-3 lists some of the keys used for basic operations, mathematical

calculations, and financial problems. Use this table for quick reference.

The pages of the

HP 12c Financial Calculator User’s Guide

are included for reference. For a complete list of functions, including the keys used for statistics and programming, refer to the user’s guide.

Table 1-3 Keys and Functions

R

Enter

Key(s)

;*

ZX

Description and Page Number in the User’s Guide

Enters a copy of number in displayed X-register into

Y-register. Used to separate numbers in RPN

(pages 19, 171) .

Arithmetic operators (pages 19, 20-22) .

10 Getting Started

Table 1-3 Keys and Functions

F

Key(s)

Change sign

Description and Page Number in the User’s Guide

Changes sign of number or exponent displayed in the X-register (page 17) .

L

Enter exponent

Q

Clear

T

Clear statistics

For very large or very small numbers. Enter the mantissa. After pressing,

L

, the next numbers keyed in are exponents of 10 (page 18) .

Clears contents of display and X-register to zero.

(page 18) .

Clears statistics registers R

(page 76) .

1

-R

6

and stack registers

T

FIN

Clear financial

T

REG

Clear all registers

Clears contents of financial registers. (page 33) .

Clears all storage registers, financial registers, stack

(X,Y,Z, and T), and statistics registers. Leaves program memory untouched. Not programmable

(page 24) .

Table 1-3 Keys and Functions

Key(s)

T

PREFIX

Cancel

V

Store

W

Recall

K

Percentage

J

Percent difference

I

Percent of total

Description and Page Number in the User’s Guide

After

T

,

U key (page 17) .

,

V

,

W

, or u

, cancels that

Press

V registers R and key in the register number (0-9 for

0

-R

9,

or

.

0-9 for registers R

.

0

-R

.

store displayed number in a specified storage

9

) to register. Also used to perform storage register arithmetic (pages 23-24) .

To recall a number from a storage register into the display, press

W

, then key in the register number.

This copies the number from the storage register into the display (page 23) .

Key in base number. Press percentage. Press

R

. Key in the

K

. Calculates x% of y (page

26) .

Key in the base numbers separated by

R

. Press

J

(page 27) .

Enter a total amount. Press

R

. Key in the number, x, whose percentage equivalent you wish to find.

Press

I

. Calculates percent that x is of the number in Y-register (page 28) .

12 Getting Started

Table 1-3 Keys and Functions

Key(s)

U f

Calculates date and days from a starting date

U o

Number of days between two dates

Description and Page Number in the User’s Guide

Key in start date and press

R

. Key in the number of days from entered date (if date is in the past, press

F

). Press

Uf

. Displays date and the day of the week as a number 1-7 to the right of the display: 1 is for Monday; 7 is for Sunday (pages

29-30) .

Key in the earlier date and press later date and press

Uo

R

. Key in the

. Calculates the number of days between two dates in actual days.

To display date based on a 30-day month, press

P

after the steps listed above (page 31) .

U j Calculates the square root of the number displayed in the X-register (page 83) .

Square root

G

Power function

U k

Raises the number in the Y-register to the power of the number in the X-register. Key in a number x.

Press

R

. Key in the exponent, followed by

G

.

(page 85) .

Calculates the reciprocal of the number displayed in the X-register (page 83) .

Reciprocal

Table 1-3 Keys and Functions

Key(s)

U

!

Description and Page Number in the User’s Guide

Calculates factorial of number displayed in the Xregister (page 83) .

Factorial

U k

Natural antilogarithm. Raise e to power of the number displayed in the X-register (page 83) .

e x

U l

Calculates natural logarithm (base e) of the number in the displayed X-register (page 83) .

LN

T

RND

Round

U n

Rounds mantissa of 10-digit number in X-register to match the display (page 83) .

Integer function

U m

Fractional function

Leaves only the integer portion of the number displayed in the X-register by truncating fractional portion. It replaces each digit to the right of the decimal point by 0. The original number can be recalled by pressing

U r

(page 83) .

Leaves only the fractional portion of the number displayed in the X-register by truncating the integer portion. It replaces each digit to the left of the decimal point by 0. The original number can be recalled by pressing

U r

(page 84) .

14 Getting Started

Table 1-3 Keys and Functions

Key(s)

T

INT

Simple interest

Description and Page Number in the User’s Guide

Calculates simple interest (page 33) .

A Stores or calculates number of compounding periods in financial problems (page 35) .

Compounding periods

U a

Multiplies a number in displayed X-register by 12 and stores the value in the i-register (page 39) .

B Stores or computes interest rate per compounding period (pages 32, 36) .

Interest rate per compounding period

U b Divides number in displayed X-register by 12 and stores the resulting value in the i-register (page 39) .

C

Stores or calculates the present (the initial cash flow) value of a financial problem (pages 32, 36) .

Present value

D

Payment

Stores or calculates the payment amount.

(pages 32, 36) .

Table 1-3 Keys and Functions

E

Key(s) Description and Page Number in the User’s Guide

Stores or calculates the future value (final cash flow) of a financial problem (pages 32, 36) .

Future value

T

AMORT

Amortization

T

NPV

Net Present

Value

T

IRR

Internal Rate of

Return

U c

Cash flow

Amortizes x number of periods using values stored in

D

,

B

,

C

, and the display. Updates and

A

(page 54) .

C

Calculates the net present value of up to 20 uneven cash flows and initial investment using stored values with c

, d

, and e

(page 58) .

Calculates the internal rate of return (yield) for up to

20 uneven cash flows and initial investment using values stored in c

, d

, and e

(page 63) .

Initial cash flow. Stores contents of displayed Xregister in R

0

, initializes n to zero, sets N

0

to 1. Used at the beginning of a discounted cash flow problem

(page 57) .

U d

Cash flow

Cash flow j. Stores the contents of X-register in R

1 increments n by 1, and sets N

1

to 1. Used for all

, cash flows except the initial cash flow in a discounted cash flow problem (page 59) .

16 Getting Started

Table 1-3 Keys and Functions

T

Key(s)

SL

Depreciation

T

PRICE

Bond price

T

YTM

Bond yield

U e

Description and Page Number in the User’s Guide

Calculates depreciation using straight-line method

(page 68) .

Calculates bond price, given desired yield to maturity (page 67) .

Calculates yield to maturity, given bond price

(page 67) .

Cash flow

T

SOYD

Depreciation

T

DB

Depreciation

Stores the number of times (from 1 to 99) each cash flow occurs as Nj. Assumes 1 unless otherwise specified (page 61) .

Calculates depreciation using the sum-of-the-yearsdigits method (page 68) .

Calculates depreciation using the declining-balance method (page 68) .

Basic Financial Calculation Example

Table 1-4 illustrates how easily you can perform financial calculations using the HP 12c Financial Calculator. For more examples and information on financial problems, including cash flows and using cash flow diagrams, refer to section three of the

HP 12c Financial Calculator

User’s Guide,

titled

, Basic Financial Functions.

Calculate the monthly payment amount on a 30-year loan of

125,000.00 with a 6.9% annual interest rate, compounded monthly.

Assume payments occur at the end of the compounding period.

Table 1-4 Loan Payment Example

Keys Display/Description

T

FIN

Clears financial registers. Press

Q if you want to return to the default screen (see above)

.

Uh

Sets payment mode to End. This step is optional unless the “Begin” indicator is lit, as End mode is the default setting.

18 Getting Started

Keys

6.9

Ub

Display/Description

360

A

Enters the annual interest rate in terms of the basic compounding period (6.9% divided by 12 months per year).

Enters the number of monthly compounding periods

(n) for a 30-year loan (12 payments per year x 30).

125

000

C

Enters the present value of the loan.

0E

Enters the future value of the loan after is has been paid off (0.00).

D

Keys Display/Description

Calculates monthly payment amount. Note the sign is negative; it is money you pay out.

Warranty and Contact Information

Replacing the Batteries

The calculator uses two, 3 Volt CR2032 Lithium batteries. The low battery symbol

(

*

) appears when battery power is nearly exhausted. Use only fresh batteries when replacing the battery. Do not use rechargeable batteries. To install a new battery:

1.

2.

3.

With the calculator turned off, slide the back cover off.

Remove only one battery at a time.

Remove one of the old batteries and replace it with a new battery with the positive polarity symbol facing outward.

4.

Remove the other old battery and replace it with a new battery with the positive polarity symbol facing outward.

5.

Replace the back cover.

Warning!

There is danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions. Do not mutilate, puncture, or dispose of batteries in fire. The batteries can burst or explode, releasing hazardous chemicals.

HP Limited Hardware Warranty and Customer Care

This HP Limited Warranty gives you, the end-user customer, express limited warranty rights from HP, the manufacturer. Please refer to HP's Web site for an exten-

20 Getting Started

sive description of your limited warranty entitlements. In addition, you may also have other legal rights under applicable local law or special written agreement with HP.

Limited Hardware Warranty Period

Duration: 12 months total (may vary by region, please visit www.hp.com/support for latest information).

General Terms

HP warrants to you, the end-user customer, that HP hardware, accessories and supplies will be free from defects in materials and workmanship after the date of purchase, for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective. Replacement products may be either new or like-new.

HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified above, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP will replace software media which does not execute its programming instructions due to such defects.

HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product with proof of purchase.

HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use.

Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b) software, interfacing, parts or supplies not sup-

plied by HP, (c) unauthorized modification or misuse, (d) operation outside of the published environmental specifications for the product, or (e) improper site preparation or maintenance.

HP MAKES NO OTHER EXPRESS WARRANTY OR CONDITION WHETHER WRIT-

TEN OR ORAL. TO THE EXTENT ALLOWED BY LOCAL LAW, ANY IMPLIED WAR-

RANTY OR CONDITION OF MERCHANTABILITY, SATISFACTORY QUALITY, OR

FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THE

EXPRESS WARRANTY SET FORTH ABOVE. Some countries, states or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This warranty gives you specific legal rights and you might also have other rights that vary from country to country, state to state, or province to province.

TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY

STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDI-

CATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS

OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUD-

ING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CON-

TRACT, TORT, OR OTHERWISE. Some countries, States or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. HP shall not be liable for technical or editorial errors or omissions contained herein.

FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE

WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT

LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN

ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE

OF THIS PRODUCT TO YOU.

22 Getting Started

Customer Care

In addition to the one year hardware warranty your HP calculator also comes with one year of technical support. If you need assistance, HP customer care can be reached by either email or telephone. Before calling please locate the call center nearest you from the list below. Have your proof of purchase and calculator serial number ready when you call.

Telephone numbers are subject to change, and local and national telephone rates may apply. For more support information, please visit the web at: www.hp.com/ support .

Table 1-5 Customer Care

Country

Algeria

Country

Anguila

Hotline Phone

1-800-711-2884

Antigua

Aruba

Austria

Barbados

Belgium

Bolivia

Brazil

Hotline Phone www.hp.com/ support

1-800-711-2884

800-8000 ; 800-

711-2884

01 360 277 1203

1-800-711-2884

02 620 00 85

800-100-193

0-800-709-7751

Argentina

Australia

Bahamas

Belgium

Bermuda

Botswana

British Virgin

Islands

0-800-555-5000

1300-551-664 or

03-9841-5211

1-800-711-2884

02 620 00 86

1-800-711-2884 www.hp.com/ support

1-800-711-2884

Bulgaria www.hp.com/ support

Canada 800-HP-INVENT

Country

Cayman Island

China

Costa Rica

Curacao

Denmark

Dominican

Republic

Egypt

Estonia

France

French Guiana

Hotline Phone

1-800-711-2884

010-58301327

0-800-011-0524

Country

Chile

Columbia

Croatia

001-800-872-2881

+ 800-711-2884

Czech Republic

82 33 28 44

1-800-711-2884

Dominica

Equador

El Salvador

Hotline Phone

800-360-999

01-8000-51-4746-

8368 (01-8000-51-

HP INVENT) www.hp.com/ support

296 335 612

1-800-711-2884

1-999-119 ; 800-

711-2884

(Andinatel)

1-800-225-528;

800-711-2884

(Pacifitel)

800-6160 www.hp.com/ support www.hp.com/ support

01 4993 9006

Finland

French Antilles

09 8171 0281

0-800-990-011;

800-711-2884

Germany

0-800-990-011;

800-711-2884

069 9530 7103

24 Getting Started

Country

Ghana

Grenada

Guatemala

Haiti

Hong Kong

Indonesia

Italy

Japan

Latvia

Lithuania

Malaysia

Mauritius

Hotline Phone www.hp.com/ support

1-800-711-2884

1-800-999-5105

183 ; 800-711-

2884

852 2833-1111

+65 6100 6682

02 754 19 782

81-3-6666-9925 www.hp.com/ support www.hp.com/ support

+65 6100 6682 www.hp.com/ support

Country

Greece

Hotline Phone

210 969 6421

Guadelupe

Guyana

Honduras

Hungary

Ireland

Jamaica

Kazakhstan

Lebanon

Luxembourg

Martinica

Mexico

0-800-990-011;

800-711-2884

159 ; 800-711-

2884

800-0-123 ; 800-

711-2884 www.hp.com/ support

01 605 0356

1-800-711-2884 www.hp.com/ support www.hp.com/ support

2730 2146

0-800-990-011;

877-219-8671

01-800-474-

68368 (800 HP

INVENT)

Country

Montenegro

Morocco

Netherland

Antilles

New Zealand

Hotline Phone www.hp.com/ support www.hp.com/ support

001-800-872-2881

; 800-711-2884

0800-551-664

Country

Montserrat

Namibia

Netherlands

Nicaragua

Norway

Paraguay

Philippines

23500027

(009) 800-541-

0006

+65 6100 6682

Panama

Peru

Poland

Hotline Phone

1-800-711-2884 www.hp.com/ support

020 654 5301

1-800-0164; 800-

711-2884

001-800-711-2884

0-800-10111

Portugal

Romania

Saudi Arabia

Singapore

South Africa

Spain

021 318 0093 www.hp.com/ support www.hp.com/ support

+65 6100 6682

0800980410

913753382

Puerto Rico

Russia

Serbia

Slovakia

South Korea

St Vincent www.hp.com/ support

1-877 232 0589

495 228 3050 www.hp.com/ support www.hp.com/ support

2-561-2700

01-800-711-2884

26 Getting Started

Country

St Kitts & Nevis

St Marteen

Swaziland

Switzerland

Switzerland

Thailand

Tunisia

UAE

Uruguay

USA

Vietnam

Hotline Phone

1-800-711-2884

1-800-711-2884

Country

St Lucia

Suriname

Hotline Phone

1-800-478-4602

156 ; 800-711-

2884 www.hp.com/ support

Sweden 08 5199 2065

022 827 8780

022 567 5308

Switzerland

Taiwan

01 439 5358

+852 2805-2563

+65 6100 6682 Trinidad & Tobago 1-800-711-2884 www.hp.com/ support

Turks & Caicos 01-800-711-2884

United Kingdom 0207 458 0161 www.hp.com/ support

0004-054-177

800-HP INVENT

+65 6100 6682

US Virgin Islands

Venezuela

Zambia

1-800-711-2884

0-800-474-68368

(0-800 HP

INVENT) www.hp.com/ support

Product Regulatory & Environment Information

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment.

Declaration of Conformity for products Marked with FCC Logo, United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

28 Getting Started

If you have questions about the product that are not related to this declaration, write to:

Hewlett-Packard Company

P.O. Box 692000, Mail Stop 530113

Houston, TX 77269-2000

For questions regarding this FCC declaration, write to

Hewlett-Packard Company

P.O. Box 692000, Mail Stop 510101

Houston, TX 77269-2000 or call HP at 281-514-3333

To identify your product, refer to the part, series, or model number located on the product.

Canadian Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Avis Canadien

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

European Union Regulatory Notice

This product complies with the following EU Directives:

• Low Voltage Directive 2006/95/EC

• EMC Directive 2004/108/EC

• Compliance with these directives implies conformity to applicable product family.

This compliance is indicated by the following conformity marking placed on the product: harmonized European standards (European Norms) which are listed on the

EU Declaration of Conformity issued by Hewlett-Packard for this product or

This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth).

This marking is valid for EU nonharmonized Telecom products. *Notified body number (used only if applicablerefer to the product label).

Hewlett-Packard GmbH, HQ-TRE, Herrenberger Srasse 140, 71034 Boeblingen,

Germany

Japanese Notice

Korean Notice

30 Getting Started

Disposal of Waste Equipment by Users in Private Household in the European

Union

This symbol on the product or on its packaging indicates that this product just not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.

The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Chemical Substances

HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as

REACH (

Regulation EC No 1907/2006 of the European Parliament and the

Council).

A chemical information report for this product can be found at: http://www.hp.com/go/reach

Perchlorate Material - special handling may apply

This calculator's Memory Backup battery may contain perchlorate and may require special handling when recycled or disposed in California.

32 Getting Started

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project