HP | CB350 Digital Camera | Quick start manual | HP CB350 Digital Camera Quick start guide

HP CA350/CB350
Digital Camera
Quick Start Guide
For more details about the camera operation and troubleshooting, please
read the User Manual located on the CDROM disc included with your
camera or visit http://www.hp.com/support and download it for
the camera support page.
Getting Started
Inserting the Battery
Follow these instructions to insert the AA batteries into the battery
compartment. If batteries are already installed, make sure to power off camera
before inserting new batteries.
1. Make sure the power is off before inserting the batteries.
2. Open the battery compartment at the bottom of the camera.
3. Insert the batteries into the compartment with the terminal
facing inside the camera and the batteries indent next to the
compartment door.
SE
T
4. Close the battery
compartment.
1
Camera Views
-Front View
Flash
Self-Timer LED /
AF Assist Lamp
Zoom Lens
Microphone
-Back View
Zoom buttons
Play button ‫٭‬1
Operation Lamp
OK button / 4-way
navigation control Quick
Functions ‫٭‬2
LCD screen
Menu button
‫٭‬4
FUNC / Delete button
# Please refer to the notes for marked item with ‫ ٭‬at page 4
2
‫٭‬3
-Top View
Stabilizer button
Power button
Speaker
Shutter button
-Bottom View
Battery
compartment
SD card
compartment
-Left/Right View
USB
Strap ring
3
Button ‫٭‬1: Play
If the camera is turned off, press and hold to turn on camera in Playback
mode.
If the camera is turned on, press to toggle camera to Playback or Shooting
mode.
Button ‫٭‬2: FUNC/Delete
In Shooting mode, press to enter My Favor menu.
In Playback mode, press to delete an image, video or audio clip.
Button ‫٭‬3: Navigation Control
The 4-way Navigation Control and the OK button allows you to access
the various menus available from the On Screen Display (OSD). Further
functions of these buttons are as follows:
Face Tracking/
Rotate Button
Macro Button
OK Button
Flash Button
Display Button
Button ‫٭‬4: Menu button
Press Menu button on camera exits if you’ve navigated into mode settings
and don’t want to make a selection
4
Initial Settings
You will be prompted to set up the language and the date and time when the
camera is turned on for the first time.
-Setting the Language
1. Press
,
,
or
to move through the selection.
2. Select a language, and then press OK to apply.
-Using Setup Menu
You can access the Setup menu whether you are in Shooting or Playback
mode. The Setup menu allows you to configure general camera settings.
To go to Setup Menu:
1. Press MENU to launch the Shooting/
Playback Menu.
or
key to change the
2. Use the
menu tab to Setup
menu.
3. Use the
or
key to move
through the menu selections.
4. To select an item, press the OK button
or
.
5
Camera Sounds
Auto Power Off
Display Timeout
Date & Time Imprint
Language
File Numbering
1min
OFF
5. Change the submenu settings using the 4-way navigation control.
6. Press the OK button to save and apply settings.
-Setting Battery Type
To ensure the camera displays the battery level correctly, be sure to set the
battery type in Setup Menu to match the installed battery type: Alkaline / NiMH
/ Lithium / Oxyride.
TV Configuration
D
Alka Alkaline
BatteryNiMH
Type
NiMH
Memory
Lithium
Li Kit
Reset Oxy
All Oxyride
6
NTSC
Alka
Modes
Your camera has two modes:
-Shooting mode
• Set to Shooting mode to capture images and record videos and audio
clips.
• Shooting mode can be further set to many options such as auto, video
and scene selection. “Setting the Shooting Scene Mode on page 9”
below.
-Playback mode
• Set your camera to Playback mode so you can view and edit captured
images as well as playback videos and audio clips. You can also attach a
voice memo to any image in this mode.
Shooting mode is selected by default when using the Power button to turn on
the camera. When you turn on your camera using the Power button, it will
automatically set to shooting mode.
-Switching between Shooting mode and Playback Mode
In Shooting mode, press the Play button to switch to Playback mode.
In Playback mode, press the Play button to switch back to Shooting mode.
7
Using Shooting Functions
Shooting Menu
If you are in shooting mode, you can access the Shooting menu simply by
pressing the MENU button on your camera.
When the menu is displayed, use the 4-way navigation control and the OK
button to move through menu selections and apply your desired settings. To
close the menu anytime, press the menu button again.
The Shooting menu allows you to change modes, and setup other capture
settings.
1. Press
MENU
to launch the Shooting Menu.
2. Use the
or
key to move through
the menu selections.
3. To select an item, press
.
4. Change the submenu settings using the
4-way navigation control.
5. Press the OK button to save and apply
settings.
8
Shooting Mode
Self-Timer/Burst
AEB
AF Area
AF Lamp
Sharpness
OFF
OFF
-Setting the Shooting Scene Mode
Setting the Shooting Scene mode allows you to capture images with preset
settings according to the scenes or environment.
For detailed explanations of the shooting scene modes, please read the user
manual located on the Camera installation CDROM disc.
Auto
Shooting Mode
Self-Timer/Burst
AEB
AF Area
AF Lamp
Sharpness
A S
OFF
OFF
Select
9
OK
Using the Function Menu
The hot key of “heart” ( FUNC button) is used for a quick setup of the latest six
shooting modes and to adjust capturing settings in Shooting Mode.
•Press the FUNC of your camera to launch My Mode Menu.
•Press the FUNC again to close the menu.
8M
•The Menu options bar displays the six
latest used shooting modes.
•The available options for each item on
the menu bar is shown in the Menu
options.
Menu
bar
0 EV
AWB
ISO
AUTO
Program
N
Menu options
10
Getting Help
Should you have a technical support question or your HP Digital
Camera require service within the warranty period, please contact the
original point of purchase or an authorized HP reseller in your country.
If service is not available at those locations, please contact an HP
Branded Product warranty agent from the support contact list provided
below. A service agent will work with you to troubleshoot your issue
and if necessary, issue a Return Material Authorization (RMA) number
in order to replace your HP Branded Product. For warranty claims, you
will be required to provide a copy of your original dated sales receipt as
proof of purchase and the issued RMA number. You will be responsible
for shipping charges when shipping the product to the service center.
The service agent will provide you with an address and you will also
be responsible for any shipping charges to the warranty service center.
Once your product is received by this service center, a replacement unit
will be shipped back to you typically within 5 business days.
Contact/phone Support:
Language
Contact/phone Support:
simp.chinese@hpodd.com
Chinese
trad.chinese@hpodd.com
Deutsch
deutsch@hpodd.com
Dutch
hollands@hpodd.com
English
english@hpodd.com
Espanol
espanol@hpodd.com
Français
francais@hpodd.com
Italiano
italiano@hpodd.com
Japanese
nippon@hpodd.com
Korean
korean@hpodd.com
Portuguese
portugues@hpodd.com
Svensk
svensk@hpodd.com
11
Contact/phone Support:
Country
Language
Number
Europe Region (EMEA)
België
Dutch and German
+ 32 2700 1724
Français
French
+ 33 171230454
Deutschland
German
+ 49 6950073896
Ireland
English
+ 353 1850882016
Italia
Italian
+ 39 269682189
Netherlands
Dutch
+ 31 202015093
Espana
Spanish
+ 34 914533458
Switzerland
German/French/Italian
+ 41 18009686
UK
English
+ 44 2073652400
North America
United States
English
1.866.694.7633
Canada
English and French
1.866.694.7633
12
P/N: 7525C00076A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising