HP | d3000 Digital Camera | User's Manual | HP d3000 Digital Camera User manual

d3000
Digital Camera
Digitalkamera
Appareil photo numérique
macchina fotografica digitale
Cámara digital
數碼相機
數碼相机
User Manual
Benutzerhandbuch
Manuel de l’utilisateur
Manuale Utents
Manual del usuario
使用說明書
使用说明書
Table of Contents
Preface ........................................................................................................ 3
About this Manual .................................................................................. 3
Safety and Handling Precautions.............................................................. 3
Using this Menu ..................................................................................... 4
Introduction ................................................................................................. 5
System Requirements ............................................................................. 5
Main Features ........................................................................................ 5
Package Contents................................................................................... 6
Camera Views ........................................................................................ 7
Camera Buttons ..................................................................................... 9
Navigation Control................................................................................ 10
Camera Memory................................................................................... 11
Getting Started ........................................................................................... 12
Attach the Camera Strap ....................................................................... 12
Inserting the Battery ............................................................................ 12
Inserting an SD/SDHC/SDXC Memory Card ............................................. 13
Turning the Power On and Off ............................................................... 13
Initial Settings...................................................................................... 13
Modes ................................................................................................. 15
Using the LCD monitor ................................................................................ 16
LCD Monitor Layout .............................................................................. 16
Changing the LCD Monitor Display ......................................................... 20
Recording Images, Videos and Voices ........................................................... 20
Taking Images ..................................................................................... 20
Setting the Zoom Control ...................................................................... 21
Using Flash .......................................................................................... 22
Setting the Focus Mode ........................................................................ 22
Using the Function Menu ...................................................................... 23
Recording Videos.................................................................................. 24
Mode dial ............................................................................................ 28
Using Voices Recording ......................................................................... 35
Using the Record Menu......................................................................... 38
Playback .................................................................................................... 43
Viewing in Single Navigation.................................................................. 43
Viewing Thumbnails ............................................................................. 43
Zooming images................................................................................... 44
Playing Videos...................................................................................... 44
Playing Voice Recording ........................................................................ 45
Playing Voice Memo.............................................................................. 45
Deleting an Image/Video/Audio ............................................................. 46
Playback Menu ..................................................................................... 46
Using the Setup Menu ................................................................................. 55
Setting Sounds..................................................................................... 55
Setting Power Save............................................................................... 55
Setting LCD Save.................................................................................. 56
Setting Date & Time ............................................................................. 56
Setting Language ................................................................................. 56
Setting File Numbering ......................................................................... 56
Setting TV Out ..................................................................................... 57
1
Setting LCD Brightness ......................................................................... 57
Setting Battery Type ............................................................................. 57
Setting Memory Kit ............................................................................... 57
Reset All .............................................................................................. 58
Making Connections .................................................................................... 59
Connecting the Camera to a PC ............................................................. 59
Connecting the Camera to a Printer ....................................................... 61
Setting the Print Mode Menu ................................................................. 62
Appendix.................................................................................................... 63
About Folder and File Names................................................................. 63
Troubleshooting .......................................................................................... 63
Specifications ............................................................................................. 63
2
Preface
About this Manual
This manual is designed to assist you in using your new digital camera. All information presented is as
accurate as possible but is subject to change without notice.
Copyright
This manual contains proprietary information protected by copyright. All rights are reserved. No part of
this manual may be reproduced by any mechanical, electronic or other means, in any form, without
prior written permission of the manufacturer.
© Copyright 2011
Federal Communications Commission (FCC) Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and to prevent
interference to radio and television reception. Use only shielded cable to connect I/O devices to this
equipment. Any changes or modifications not expressly approved by the manufacturer may void your
warranty and service agreement.
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
Trademark Recognition
Windows XP/Vista/Win7 are registered trademarks of Microsoft Corporation in the United States
and/or other countries. Windows is an abbreviated term referring to the Microsoft Windows Operation
System. All other companies or product names are trademarks or registered trademarks of their
respective companies.
Safety and Handling Precautions
Camera Information
•
•
•
•
•
•
Do not take apart or attempt to service the camera yourself.
Do not expose the camera to moisture, or extreme temperatures.
Allow the camera to warm up when moving from cold to warm temperatures.
Do not touch the camera lens.
Do not expose the lens to direct sunlight for extended periods.
Do not use abrasive chemicals, cleaning solvents or strong detergents to clean the product. Wipe
the product with a slightly damp soft cloth.
• Do not make the camera collide with objects or put heavy objects on it.
3
Battery Information
• Turn off the camera before installing or removing the battery.
• Use only the provided batteries or type of battery and charger that came with your camera. Using
other types of battery or charger may damage the equipment and invalidate the warranty.
• Inserting the battery upside down can cause damage to the product and possibly cause an
explosion.
• When the camera is used for an extended period of time, it is normal for the camera body to feel
warm.
• Download all pictures and remove the battery from the camera if you are going to store the
camera for a long period of time.
• The type of battery and the battery power level may cause the lens to be stuck up.
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
the instructions.
Using this Menu
Symbols used in this manual are explained below:
This indicates useful information when using your camera.
This indicates important message that should be read before using the function.
4
Introduction
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera.
System Requirements
In order to get the most out of your camera, your computer must meet the following system
requirements:
For Windows:
• Windows XP/Vista/Win7/8
• Processor: Pentium II 450MHz or above
• Memory: 512MB or above
• HDD space: 200MB or above
• 16bit color display monitor
• Microsoft DirectX 9.0C
• USB port and CD-ROM drive
For Macintosh:
• Power Mac G3 or later
• Mac OS 10.3.X (X=0~9) ~ 10.6.6 or later
• Memory: 512MB or above
• Q. Time player ver. 6.0.3 or above
• USB port and CD-ROM drive
Main Features
•
•
•
•
•
•
•
•
•
•
16 mega pixels resolution
Up to 21x optical zoom and 5x digital zoom
3.0 inch color LCD monitor
128MB internal flash memory with optional external SD/SDHC/SDXC card
Supports up to 4GB of SD card, and up to 32GB of SDHC card and to 64GB of SDXC card
Easy-to-use button interface
DCF, DPOF, PictBridge compatibility
Slideshow to review still images
A/V output to view your images, videos and audio on your TV
USB port to transfer images, videos and audio to your PC
5
Package Contents
Please check the contents of your camera package. It should contain:
Digital camera
AA battery x 4 pcs
Neck strap
USB cable
Quick Start Guide/
Lens cover
Lens Strap
6
Camera Views
Front View
1.
2.
3.
Self-timer LED/
AF Assist Lamp
Microphone
Lens
Back View
4.
5.
6.
7.
8.
9.
10.
7
LCD monitor
LED indicator
Movie button
Playback button
OK button/4-way
navigation control
Function/Delete
button
Menu button
Top View
11.
12.
13.
14.
15.
Flash
Zoom lever
Shutter button
ON/OFF
(Power button)
Mode dial
Bottom View
16.
17.
8
Battery/Memory card
compartment
Tripod screw hole
Right View
18.
Strap ring
19.
20.
21.
Strap ring
Speaker
USB AV/Out
Left View
Camera Buttons
Your camera is equipped with different buttons for ease of use.
Button
Description
Power
Press the Power button to turn the power on/off.
Shutter
Press to capture an image or start/stop recording audio clip.
Zoom lever
In photo and movie mode, spin the zoom lever to left to zoom out, right to zoom in.
In Playback mode, spin to zoom in to magnify image or zoom out enter
9-image/calendar thumbnails.
Menu
Press to enter or exit menu/submenu.
Function/Delete
In Photo mode, press to enter function menu.
In Playback mode, press to delete an image, video or audio clip.
Mode dial
There are 8 recording modes can be set. Once turning the mode dial, it enters the
selected mode immediately even in Playback mode or during movie recording.
Playback
Press to enable Playback mode or return Record mode.
Movie
Press to start/stop recording video.
9
Navigation Control
The 4-way Navigation Control and the OK button allow you to access the various menus available
from the On Screen Display (OSD). You can configure a wide range of settings to ensure maximum
results from your images and videos. Further functions of these buttons are as follows:
No.
Description
1
Face Tracking/Rotate Button
2
Macro Button
3
Display Button
4
Flash Button
5
OK Button
Button
OK
Flash/Right
Description
1.
2.
Confirm a selection when using the OSD menus.
In Playback Movie/Audio mode, press to Start video or audio playback.
1.
In Photo Mode, press to scroll through the flash mode options.
(Auto, Red-eye Reduction, Forced On, Slow Sync and Forced Off)
In Playback mode, press to view the next image, video or audio clip.
In playback Movie mode, press to Forward video playback.
In Menu, press to enter the submenu or to navigate through the menu
selections.
2.
3.
4.
1.
Macro/Left
Up/Face Tracking/
Rotate
2.
3.
4.
1.
2.
3.
4.
1.
Display/Down
2.
3.
In Photo Mode, press to scroll through Macro options. (Macro, Pan Focus,
Infinity and normal)
In Playback mode, press to view the previous image, video or audio clip.
In Playback movie mode, press to Rewind video playback.
In Menu, press to exit a submenu or to navigate through the menu selections.
In Photo Mode, press to turn the face tracking function on and off.
Playing Video/Audio file, press to Pause/Start video or audio playback.
In Playback photo mode, press to rotate the image clockwise 90 degrees by
each press of the button. This feature is applicable for still images only.
In Menu, press to navigate through the menu and submenu selections.
The LCD monitor can be changed into 4 different types such as Basic, Full,
None and Guideline.
Playing Video/Audio file, press to stop video/audio playback.
In Menu, press to navigate through the menu and submenu selections.
10
Camera Memory
Internal memory
Your camera is equipped with 128MB of internal memory. Users can store files up to 108MB. If there is
no memory card inserted in the memory card slot, all images, videos and audio clips recorded are
automatically stored in the internal memory.
External storage
Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards with a maximum
capacity of 32GB. Then also supports SDXC cards with a maximum capacity of 64GB. If there is a
storage card inserted in the memory slot, the camera automatically saves all images, videos and audio
clips in the external storage card. The icon
indicates the camera is using SD card.
Not all cards may be compatible with your camera. When purchasing a card, please
check the card's specifications and take the camera with you.
11
Getting Started
Attach the Camera Strap
1. Pass the strap through the strap ring by outside.
2. Then pass it through the buckle as the inner loop
like the illustration.
3. Put the strap in the strap holder.
4. Take up the slack and make sure the strap is tight
from the buckle.
Wrapping the strap around your neck is dangerous. Take care that child do not hang
the strap around their neck.
Inserting the Battery
Follow these instructions to insert the battery into the battery/memory card compartment.
Please read "Battery Information" on page 4 before inserting/removing batteries.
1. Make sure the power is off before inserting the battery.
2. Unlock and open the battery/memory card
compartment at the bottom of the camera.
3. Insert the batteries into the compartment with the
terminal facing inside the camera with correct
orientation as shown.
12
4. Close and lock
the
battery/memory
card
compartment.
Inserting an SD/SDHC/SDXC Memory Card
Expand your camera’s storage by using SD, SDHC or SDXC
memory cards.
1. Unlock and open the Battery/memory card compartment
at the bottom of the camera.
2. Insert the SD/SDHC/SDXC card into the memory card
slot with the metallic part facing the back side of the
camera.
3. Push the SD/SDHC/SDXC card into the memory slot until
it clicks into place.
4. Close and lock the Battery/memory card compartment.
To remove the SD/SDHC/SDXC card
1. Unlock and open the battery/memory card
compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
Windows XP are not support SDXC card (exFAT format). But in Windows XP
(Service Pack 2 or 3), you can download exFAT patch update to support SDXC card.
Turning the Power On and Off
There are two ways to turn on the camera:
• The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends
and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See "Modes" on page 15 to know more about Record and Playback mode.
Please remove the lens cover before doing Power on.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera.
First is the setup of language menu. Specify in which language menus and messages are to be displayed
on the LCD monitor.
Setting the Language
1. Press
, ,
or
to move through the selection.
2. Select a language, and then press OK to apply.
Setting the Date & Time
1. Press
or
to move through the selection.
13
2. Press
or
keys to change the value for the date and time.
3. Press OK to apply.
to close the menu.
4. If necessary, press
Now, you are ready to start taking images and videos.
Holding down
or
keys to change the values continuously.
14
Modes
Your camera has three modes:
Record Mode
This is the default mode while you turn on the camera every time. You are able to take images and
record audio clips in this mode.
Playback mode
Press the Playback button
after the camera is turned on to view and edit captured
images or playback videos and audio clips. The recording of voice memo attached to images is
available in this mode.
Movie mode
Press the Movie button
after the camera is start/stop recording video in this mode.
15
Using the LCD monitor
The LCD monitor shows all important information regarding camera settings as well as the visual
image of your image or video. The display on the LCD monitor is called the On Screen Display or OSD.
LCD Monitor Layout
Photo Mode Screen Layout
No.
Item
Description
1
Record Mode
Indicates the current mode.
2
Flash
Indicates flash settings.
3
Self-timer
Indicates drive mode settings.
4
Zoom indicator
Displays zoom.
5
Shots remaining
Indicates the remaining shots available.
6
Battery
Indicates battery level.
7
Storage media
Indicates current storage media in use.
8
Date stamp
Indicates date stamp is enabled.
9
Movie size
Indicates movie size.
10
Stabilizer
Indicates stabilizer function is enabled.
11
Saturation
Displays saturation settings.
12
Contrast
Displays contrast settings.
13
Histogram
Graphic display of Brightness.
14
ISO
Displays ISO settings.
15
Focus area
Indicates focus area.
16
Shutter speed
Displays shutter speed settings.
17
Aperture value
18
Shake warning
19
Focus
Displays aperture settings.
Indicates the warning of a long time exposure (it may cause the shake
and blur).
Indicates focus is enabled.
20
Exposure
Displays exposure settings.
21
Face tracking
Indicates face tracking is enabled.
22
White balance
Displays white balance settings.
23
Metering
Displays metering settings.
24
Sharpness
Displays sharpness settings.
25
Quality
Displays quality settings.
26
Photo size
Displays photo size settings.
27
AF lamp
Indicates AF lamp is enabled.
16
Movie Mode Screen Layout
Recording Layout
No.
Item
Description
1
Key indicator
Displays the commands on 4-way Navigation Control button
2
Recorded time
Displays recorded time.
3
Recording status
Indicates recording status.
Playback Mode Screen Layout
The Playback mode display varies depending on the type of image being viewed.
Playback mode display of still images:
No.
Item
Description
1
Playback mode
Indicates playback mode.
2
Protect
Indicates file is protected.
3
Voice memo
Indicates voice memo is attached.
4
Button intro
Indicates the button to press on the camera to play a video or audio file.
5
File no./Total no.
Indicates the file number over the total number of files in the storage
card.
6
Battery
Indicates battery level.
7
Storage media
Indicates used storage memory.
8
Recording
information
Displays recording information of the file.
9
DPOF
Indicates the file is marked for printing.
10
Image Size
Displays the image size settings.
17
Playback mode of videos:
No.
Item
Description
1
Playback mode
Indicates playback mode.
2
Protect
Indicates file is protected.
3
Video clip
Indicates the file is a video.
4
Button intro
5
File no./Total no.
6
Battery
Indicates battery level.
7
Storage media
Indicates used storage memory.
8
Recording date &
time
Displays the date and time of the video clip.
9
Video size
Indicates the size of the video clip.
10
Volume
Indicates the volume while playing.
11
Video length
Display the total length of the video clip.
12
Played time
Indicates the played time of the video.
13
Playing status
Displays playing status.
14
Capture image
Capture the screenshot and save.
Indicates the button to press on the camera to play a video or audio
file.
Indicates the file number over the total number of files in the
storage card.
18
Playback mode of audio clips:
No.
Item
Description
1
Playback mode
Indicates playback mode.
2
Protect
Indicates file is protected.
3
Button intro
Indicates the button to press on the camera to play a video or audio file.
4
File no./Total no.
Indicates the file number over the total number of files in the storage
card.
5
Battery
Indicates battery level.
6
Storage media
Indicates used storage memory.
7
Recording
information
Displays recording information of the file.
8
Volume
Indicates volume settings.
9
Audio length
Display the total length of the audio clip.
10
Played time
Indicates played time.
11
Playing status
Displays playing status.
19
Changing the LCD Monitor Display
The type of information displayed on the LCD monitor can be changed using the
button. Press the
button repeatedly to change the LCD display from one type to another. In Photo Mode, the LCD
display can be changed into any of the following:
• Basic
• Full
• None
• Guideline
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD
off or Guide lines on: AEB, Face tracking, AF lamp, Drive mode, and Focus.
• Use the "Guide lines" to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following:
• Basic
• Full
• None
LCD display cannot be changed in the following situations:
• Adjusting Aperture value/Shutter speed under Manual exposure mode.
• Adjusting Aperture value under Aperture Priority mode.
• Adjusting Shutter speed under Shutter Priority mode.
• Recording video or audio clips.
• Playing video or audio clips.
• Playing slideshow.
Recording Images, Videos and Voices
Taking Images
Now that you are familiar with your camera, you are now ready to take your images. Taking images
with your camera is very simple.
1. Turn on the camera by pressing the Power button.
2. Frame the shot using the focus bracket on the LCD
monitor. See illustration on the right.
3. Pressing the Shutter button down halfway automatically
focuses and adjusts the exposure, and pressing the
Shutter button down fully captures the images.
appears, hold the camera
When the shake warning icon
steadily, with your arms at your side or use a tripod to
stabilize the camera to prevent blurred images.
20
Setting the Zoom Control
Using a combination of 21 times optical zoom and 5 times digital zoom permits zoom photography at
up to 105 times magnification. While the digital zoom can be a useful feature, the more an image is
enlarged (zoomed), the more pixelated (grainier) the image will appear. Please refer to "Setting the
Digital Zoom" on page 41 on how to setup digital zoom.
To adjusts the optical zoom:
1. Spin the Zoom lever to zoom in or zoom out an image.
2. The zoom indicator appears on the LCD monitor.
Zoom lever
1.
2.
Spin the lever clockwise (right) to zoom in.
Spin the lever counterclockwise (left) to zoom out.
To adjusts the digital zoom:
1.
2.
3.
Activate digital zoom. See "Setting the Digital Zoom" on page 41.
Spin the Zoom lever clockwise/counterclockwise optically zooms in/out to the maximum
until it stops.
Release the Zoom lever.
Optical zoom 1X to 21X
Digital zoom 1X to 5X
Digital zoom is not activated in recording videos
21
Using Flash
When taking pictures in difficult lighting conditions, use the Flash/Right button to get correct
exposure. This function cannot be activated in recording videos or continuous shooting.
To activate Flash:
• Press the Flash/Right button on your camera
repeatedly until your desired flash mode is displayed
on the LCD monitor.
Your camera is equipped with five flash modes:
Flash/Right
button
Auto flash is enabled
Auto. The flash fires automatically whenever extra
lighting is needed.
Red-eye reduction. The flash fires twice to reduce
the red-eye effect.
Forced on. The flash fires whenever you press the
Shutter button regardless of lighting conditions.
Slow sync. The flash fires with a slow shutter
speed.
Forced off. The flash is turned off.
• Flash function is only available in shooting still images but not available in Burst,
Speedy Burst and AEB modes.
• Do not charge the flash while spinning the Zoom lever. Charge the flash after
releasing the zoom lever if necessary.
• When activating flashlight, the Flash won't pop up automatically. Please open
the Flash manually by lifting the protruding grip on the Flash cover.
Setting the Focus Mode
This function allows users to define the type focus when recording a still image or a video clip.
To set the Focus mode
• Press the Macro/Left button repeatedly until the desired focus mode icon is displayed on the
lower left corner of the LCD monitor.
Macro/Left button
Your camera supports the four focus modes:
Normal. With normal focus, the focus range starts from
1m. When the camera is set to Normal mode, there is no
icon displayed on the screen.
Macro. This mode is designed for close-up
photography. If Macro is enabled, you can capture the
detail and sharpness of a very close image by fixed focus.
Pan Focus. The focus of this mode is in the maximum
Depth of Field (DOF), not designing for close-up
photography.
Infinity. When Infinity is set, the camera focuses on
distant objects.
22
Focus enabled
Using the Function Menu
The Function Menu is used to adjust capture settings in Photo Mode. It contains My Mode, Photo
Size, Quality, Movie Size, EV Compensation, White Balance, ISO, Metering, and Color Mode.
Press the Fn button of your camera to launch the Function Menu.
Press the Fn button again to close the menu.
Menu Options
• The Menu bar displays the current status
of your camera settings. Only the available
functions for the settings are shown as
icon on the menu bar.
• The available options for each item on the
menu bar are shown in the Menu options.
or
key to move through
• Use the
the menu selections then press the OK
button to save and apply changes.
Menu bar
My Mode
1. The My Mode function displays the 6 most recent modes
used in order (except Voice Recording). When you move
through the different modes in the menu options, the
items on the menu bar changes synchronously to the
corresponding available settings.
2. This function only appears while using scene mode.
Photo Size
The Photo Size function is used to set the resolution before
you capture the image. Changing the Photo Size affects the
number of images that can be stored in your memory card.
The higher the resolution, the more memory space is
required.
The table below shows the Photo Size values for still images.
Icon
Pixel Size
Printing Size
Suggestion
Pixel Size
Printing Size
Suggestion
4608 x 3456
A2 Size
2048 x 1536
4" x 6"
4608 x 3072
Standard print paper
1920 x 1080
HDTV
3264 x 2448
A3 Size
640 x 480
E-mail
2592 x 1944
A4 Size
Icon
23
Quality
The Quality sets the quality (compression) at which the
image is captured. The quality determines the amount of
compression applied to your images. Fine quality would
give you the best images with sharper details and less
compression. However, the higher the quality, the more
memory space is required in your memory card.
EV Compensation
Images can be captured with the overall scene intentionally
made brighter or darker. These settings are used when a
suitable brightness (exposure) cannot otherwise be
obtained in circumstances where the difference in
brightness between the subject and the background (the
contrast) is large, or when the subject that you wish to
capture is very small within the scene. Available for still
images only.
• To adjust EV settings, press the
or
keys to
increase/decrease the value. As you adjust the
settings, the LCD monitor synchronously displays the
image applying the EV settings. Press the OK button
to save and apply changes.
Recording Videos
You can record videos with the camera, the available
recording time depends on the capacity of the memory
card. Videos can be recorded until the maximum memory
capacity has been reached. However the length of a
single video may be limited (the limitation depends on the
camera model).
1. Press the Movie button to start recording.
2. Focus your camera on the subject that you want to
take.
3. Use the Zoom lever to zoom in and zoom out an
image.
.
4. To pause recording, press the key
again.
5. To continue recording, press the key
6. To stop recording, press the Movie button.
• When the camera stop recording due to reaching maximum capacity (4GB) for a
single video, simply press the Movie button again to continue recording.
• The camera will automatically stop recording when the memory capacity is full.
• Digital zoom is not available while recording a video.
• Sound cannot be recorded while using zooms (Spinning the Zoom lever.)
• Power save is not available in video recording or pause recording.
Settings of Recording Videos
Press Function button to enable video setting menu before recording a video.
24
Movie Size
The Movie Size function appears only in Movie mode. Use
this function to adjust the resolution and quality of movie
clips.
The table below shows the available size and corresponding image quality settings.
Icon
Item
Description
1280 X 720
HDTV (Support SDHC_Class(6))
The maximum length of a single video recording is up to 29 minutes. It
will automatically stop recording when the recording time is over 29
minutes or the file size is over 4 GB.
640 X 480
High Quality
320 X 240
Normal
Web
For Internet, see "Internet Mode" on page 25 below.
Internet Mode
The Internet Mode allows you to record videos with predefined video settings for easy upload to the
Internet website.
Therefore when you record using the Internet Mode, the following standards are followed:
• Recorded videos are set to Internet standard resolution of 640 X 480.
• Recording automatically stops when the file reaches 1 GB.
• Available recording time for Internet Mode is up to 10 minutes.
25
White Balance
This sets the white balance for a variety of lighting
conditions and permits images to be captured that
approach the conditions that are seen by the human eye.
• As you move through the selection, you can see the
preview on the LCD monitor synchronously.
Icon
Item
Description
Auto White Balance
The camera automatically adjusts the white balance.
Daylight
Ideally used for bright sunny conditions.
Cloudy
Ideally used for cloudy conditions.
Tungsten
Ideally used for indoor images with tungsten or halogen
lighting without a flash.
Fluorescent 1
Ideally used for indoor images with bluish fluorescent
lighting conditions.
Fluorescent 2
Ideally used for indoor images with reddish fluorescent
lighting conditions.
Custom
Used when light source cannot be specified.
Press the Shutter button for the camera to automatically
adjust the appropriate white balance setting according to
the environment.
ISO
This sets the sensitivity for capturing images. When the
sensitivity is raised (and the ISO figure is increased),
photography will become possible even in dark locations,
but the more pixelated (grainier) the image will appear.
• Use a higher ISO setting in dim conditions and a
lower ISO setting in brighter conditions.
26
Metering
This sets the metering method for calculating the
exposure.
Icon
Item
Description
Multi
The entire area of the screen is measured, and the exposure is
calculated.
Center
Averages the light metered from the entire frame, but gives greater
weight to the subject matter at the center.
Spot
A very small portion of the center of the screen is measured, and the
exposure is calculated.
Color Mode
The Color Mode function applies different colors or tones
for a more artistic effect on the still images or videos.
• As you move through the selection, the preview on
the LCD monitor changes synchronously.
Icon
Item
Description
Normal
The camera records normally.
Stylish
Captures a photo or records a movie in Stylish style.
Vivid
The camera captures the image with more contrast and saturation
emphasizing on the bold colors.
Sepia
Images are captured in sepia tones.
Color Accent (Red)
Retains red tone while the rest of the scene becomes black and white.
Color Accent
(Green)
Retains green tone while the rest of the scene becomes black and
white.
Color Accent (Blue)
Retains blue tone while the rest of the scene becomes black and
white.
B&W
Images are captured in black and white.
Vivid Red
Captured image becomes reddish. Ideally used to record images like
flowers and cars to make them more vivid.
Vivid Green
Captured image becomes greenish. Ideally used to record images like
mountains and lawns to make them more vivid
Vivid Blue
Captured image becomes bluish. Ideally used to record images like
the sky and the ocean to make them look more vivid.
27
Mode dial
There are 8 recording modes can be set by turning the Mode dial, such as
Intelligent Scene, Scene mode, Continuous Shooting, Photo Stitch,
Manual Exposure, Aperture Priority, Shutter Priority and Program. Once
turning the Mode dial, it will enter the selected mode immediately even in
Playback mode or during movie recording.
For detail operation, please see the following sections.
The table below shows the available settings for Mode dial.
Icon
Mode
Description
Intelligent Scene
The camera detects the shooting conditions and automatically switches
to the appropriate scene mode. See "Using Intelligent Scene" on page
29 for more details.
Scene mode
Turns the mode dial to enter last used Scene mode. Press the MENU
button to select other scene mode. See "Setting the Scene Mode" on
page 30 for more details.
Continuous
Shooting
Turns the mode dial to enter last used Continuous Shooting mode. See
"Using Continuous Shooting" on page 36 for more details.
Photo Stitch
This feature creates a panoramic photo from multiple shots. See "Using
Photo Stitch Mode" on page 36 for more details.
Manual Exposure
This feature lets users to adjust the shutter speed and aperture value to
correctly expose your images. See "Using Manual Exposure" on page 37
for more details.
Aperture Priority
This feature lets users to adjust the aperture value and the camera
automatically selects the shutter speed to match the brightness. See
"Using Aperture Priority Mode" on page 38 for more details.
Shutter Priority
This feature lets users to adjust the shutter speed and the camera
automatically selects the aperture value to match the brightness. See
"Using Shutter Priority Mode" on page 38 for more details.
Program
The camera automatically adjusts suitable shooting settings like shutter
speed and aperture values.
28
Using Intelligent Scene
This feature is most useful for novice users to capture great images even without basic knowledge of
photography. Simply frame the shot with the help of Intelligent Scene Mode, the camera automatically
recognizes 11 kinds of scenes - Portrait, Landscape, Sunset, Macro, Text, Snow, Backlight, Backlight
Portrait, Night Scene, Night Portrait and Foliage - and selects the ideal settings.
Intelligent scene icon. After the camera detects the shooting
conditions, this icon changes to show the detected scene mode.
The camera changed to Landscape mode
automatically.
To activate Intelligent Scene
1. Select from the Scene Mode submenu.
2. Focus the camera on the subject to capture.
3. The camera detects the shooting conditions
and switches to an appropriate scene mode.
4. Half press the Shutter button to focus the
subject. The frame turns green to indicate
focus is set.
5. Press the Shutter button to take the shot.
29
Setting the Scene Mode
By simply selecting one of the following 27 modes, you can
capture the image with the most appropriate settings.
1. Turn the Mode dial to icon SCN.
to launch the Record Menu.
2. Press
3. Use the navigation controls to move through the
selection.
4. Press the OK button to save and activate the selected
scene mode.
The table below shows the available scene mode settings.
Icon
Item
Description
Portrait
The camera blurs the background to focus on the subject.
Landscape
This feature is used to emphasize wide scenic views.
Sunset
This feature enhances the red hue for recording sunset images.
Backlight
This feature is used to capture the image of a backlight object by
changing the metering.
Kids
This feature is used to capture still images of moving kids.
Night Scene
This feature is used to capture images with night scenery background.
Fireworks
This feature slows shutter speed to capture fireworks explosions.
Snow
This feature is used for beach and snow scenes.
Sports
This feature captures still images in high speed motions.
Party
This feature is used for wedding or indoor party settings.
Candlelight
This feature is used to capture warm candle light effects.
Night Portrait
This feature is used to capture portrait pictures with night or dark
background.
Soft Skin
This feature enhances skin tone thus facial skin appears smooth.
Flowing Water
This feature enhances smooth effects like water or silk.
Food
This feature is used to capture food images. The increased saturation
in this mode makes the captured image more enticing.
30
Building
This feature enhances the edges of captured images.
Text
This feature enhances the black and white contrast normally used
when capturing text images.
Foliage
This feature boosts the saturation of greens to give a rich color to
foliage.
Auction
This feature combines up to 4 shots into a single image and provides 4
patterns to select for usage of auction.
Smile Capture
This feature uses face tracking to auto detect faces to capture. When
smiles are detected, it continuously captures the image.
Blink Detection
This feature detects if the subject blinked an eye when the image is
captured and gives the user an option whether to save it or not.
Pre-composition
This feature captures an image temporarily as a reference. Full press
shutter after referring the subject to the reference point.
Love Portrait
Self Portrait
D-Lighting
This feature uses face tracking to auto detect faces to capture portraits
images without the help of others. When over two faces are detected,
AF is automatically activated. The camera starts count down and
captures a picture in two seconds.
This feature set zoom to wide end. When one face is detected, AF
automatically activated and plays the sound (Bi) for notice. Then
camera starts count down and captures a picture in two seconds.
This feature applies digital processing only to the necessary portion(s)
of the image and preserves details in highlights and shadows with
natural contrast.
Fisheye Lens
This feature captures a full-frame hemispherical image.
Voice Recording
This mode is used to record audio clips.
After selecting the scene mode, the selected mode, except Voice Recording, will be added to the
forefront in My Mode of Function Menu. In the Menu options, 6 most recent used modes will be
displayed in order. See "Using the Function Menu" on page 23.
Using Kids Mode
Tactically, kids are the most difficult to photograph. They
tend to be highly animated and can be a real challenge to
make them pay attention for more than just a second or
two. To capture a great moment for your kids, just keep the
camera in kid mode. The mode provides higher shutter
speed and always focuses on moving subject.
31
Using Sports Mode
When you need a series of sports motion images, such as a golf swing, or try to capture the images of
a flying hummingbird/butterfly, be sure to switch the scene mode to sports mode.
Using Party Mode
Let the Party mode on! It can be difficult to get everyone on a party. While you have the whole gang
together, take a group or family portrait. Party mode features on Red-eye reduction flash and face
tracking. You’ll miss fewer shots, and have more time to focus on enjoying the party.
Using Soft Skin mode
When the soft skin mode is activated, it makes wrinkles and lines look less conspicuous, while
preserving resolution in areas of the picture outside of the skin. The camera detects skin color area,
such as the face and processes the image to make the skin appear smooth.
Using Food Mode
How to share your dining experiences and comments of
interesting widgets on your blog by close-up images? Just
get the camera and set the scene with food mode. This
mode features on macro focus and auto flash designed for
close-up photography.
Macro focus and Auto Flash are
enabled by using Food mode.
Using Foliage Mode
A scenic image, such as a garden or forest scene, that full of doll green colors is boring. In foliage
mode, the greens, blues, are brilliantly enhanced making scenic pictures pop out with bright color.
Using Auction Mode
It’s hard and wastes a lot of time to combine several images by software. Select Auction mode and
choose a pattern, then take a few shots from different angle. The camera composes a combined image
in lower resolution suited to online posting.
1. Select Auction mode from Scene mode menu.
or
keys to choose a pattern.
2. Use
3. Press the OK button to start shooting.
4. Frame the subject and press the Shutter button to take
the first shot.
32
5. Press OK button to continue the second shot.
6. Or, press Menu button to go back the first shot.
7. Repeat step 4 to 6, until the pattern is filled in images.
8. Press OK button to save the composed image.
9. Or, press Menu button to go back last shot.
10.
11.
The camera saves the image to memory.
Use USB cable or memory card reader (Please refer to
"Connecting the Camera to a PC" on page 59) to transfer
the image to PC and upload it to website.
Auction mode provides 4 kinds of pattern as follow
The image is set to low quality and VGA (640x480) size only.
Using Smile Capture Mode
When facing camera, especially kids, smiles are always short and hard to seize by manual shutter.
Smile capture mode detects every smile all the time and performs Automatic Focus (AF) to capture an
image without pressing Shutter button.
Follow the instructions to get a Happy image by Smile
Capture Mode:
1. Select Smile capture mode from scene menu.
2. Focus the camera on the subject to capture.
3. When a smile is detected, the white focus frame
turns green to denote camera shutter and take a
shot automatically.
Using Blink Detection Mode
Nothing ruins a great picture more than having your subjects' eyes closed. Blink Detection provides
you with extra assurance when capturing once-in-a-lifetime moments like holding a trophy with
teammates after winning a basketball game.
If closed eyes are detected, a saving confirmation menu appears on the screen, allowing you to
re-take the shot before your subject or subjects move on.
33
To activate Blink Detection
1. Select Blink Detection Mode from Scene Mode
submenu.
2. Half press the Shutter button to focus the subject.
The frame turns green to indicate focus is set.
3. Press the Shutter button to capture the image
and automatically save the Image.
4. If the camera detects subject blinked eye, a "Save
image" or "Cancel" option appears on the screen.
5. Select Save image to save or Cancel to disregard.
Using Pre-composition Mode
When asking someone else to take images for you, but the images always don’t come up right?
Pre-composition helps you get the background you
want, even if you need to ask someone else to record
the image for you.
Basically, Pre-composition is a two-step process.
1. Compose the background you want and press the
Shutter button (full press), which causes 1/3 of
semi-transparent image of the background to remain
on the LCD monitor. Press Menu button to cancel the
semi-transparent temporarily image.
2. Ask someone else to record a shot of you against your
original pre-composed background, telling him/her to
compose the image by using the 1/3 semi-transparent
screen image as a guide.
3. Move your position until photographer confirm your
whole or half body in the frame and in the right place.
4. Press the Shutter button. Camera stores the image
produced by this step only.
34
Using Love Portrait
Want to take a good image when there are just two of you? All you have to do is hold the camera and
show your smiles together.
If over two faces had been recognized, the camera performs 2-second countdown with a beep notice
then take a shot without pressing the Shutter button.
Using Self Portrait
When you are the one taking the picture for yourself, then self portrait mode is necessary besides the
tripod. With your long arm’s help, the camera begin face tracking in self portrait mode. If a face had
been recognized, the camera performs 2-second countdown with a beep notice then take a shot
without pressing the Shutter button.
Tips
•
•
•
to make a great shape by self portrait photography:
Lean in towards the camera to reduce double chin.
Angle your body and bend your arms to look slimmer.
Keep your shoulders back.
Using D-Lighting Mode
Active D-Lighting mode preserves details in highlights and shadows, creating photos with natural
contrast. Use for high contrast scenes, for example, when photographing brightly light outdoor scenery
through a door/window, or taking pictures of shaded subjects on a sunny day. With this feature, the
adjustment of contrast is accomplished in-camera and requires no additional post-processing for the
bulk of images.
Using Fisheye Lens Mode
The Fisheye Lens mode applies a hemispherical effect on
the photos to make them look more interesting.
Original
Fisheye Lens
Using Voices Recording
1. From the Scene menu, select Voice Recording.
The Voice Recording screen layout is displayed on
the LCD monitor.
2. Press the Shutter button to start recording.
3. Press the Shutter button again to stop recording.
35
Using Continuous Shooting
Turn the Mode dial to icon Continuous Shooting. Press Up key to select between the following
settings:
Icon
Item
Description
Burst
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the shutter button is released.
Speedy Burst
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
AEB
AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive
images in the order of standard exposure, under exposure and
overexposure compensation.
Using Photo Stitch Mode
Use this feature to create a panoramic photo
from multiple shots. You can combine up to 2 or
3 shots into one single and seamless image
quickly and easily.
To stitch the still image
1.
Enter Photo Stitch mode and press the Shutter
button to take the first shot. Then, press the
UP key to select the direction how shots will be
stitched.
36
2.
A guidance bar appears after taking the
first shot. Follow the direction displayed on
LCD screen to pan the camera. Or, press
the Menu button to restart shooting.
4.
After taking the second shot, the yellow
block moves to the end of the guidance
bar, and the OK button appears as well.
You can press the OK button to stitch the
first two shots, or the Menu button to
restart shooting.
3.
Once the
icon overlaps the yellow block,
you can get another shot without pressing the
shutter button.
5.
Same as step 3, moves the
icon to overlap the yellow block, and then you can get the third shot
and the combined image is generated automatically. Now, you finish this set of stitch shooting.
Using Manual Exposure
When the camera is in the manual exposure mode, you can change either aperture or shutter speed, or
both.
To activate Manual Exposure
1.
2.
3.
4.
Turn the Mode dial to icon Manual Exposure.
Press OK button to enter the adjust mode.
or
keys to select the shutter speed.
Use the
Or, use the
or
keys to select the aperture
value.
5. Use the OK button to switch between aperture and
shutter speed adjustment and vice versa.
6. Press the Shutter button to capture the image.
Displays the aperture and
shutter speed value
37
Using Aperture Priority Mode
This mode is designed for control the aperture value by user and let camera decide the shatter speed.
The main impact that aperture had on images was with regards to Depth of Field. (DOF)
• Choose lager aperture, only one subject in focus but the background nice and blurred. (Shallow
DOF)
• Choose smaller aperture, an image with everything in focus. (Great DOF)
To set Aperture values
1. Turn the Mode dial to icon Aperture Priority.
2. Press OK button to enter the adjust mode.
or
keys to select the aperture value
3. Use the
options.
4. Press the Shutter button to capture the image.
Displays the aperture value
Using Shutter Priority Mode
This mode is designed for capturing moving subjects. A faster shutter speed is required to freeze a
motion (flying birds), while the slower shutter speed creates a sense of motion (water flowing).
To set Shutter values
1. Turn the Mode dial to icon Shutter Priority.
2. Press OK button to enter the adjust mode.
or
keys to select the shutter value
3. Use the
options.
4. Press the Shutter button to capture the image.
Displays the shutter value
Using the Record Menu
If you are in Photo Mode, you can access the Record menu simply by pressing the MENU button on
your camera.
When the menu is displayed, use the 4-way navigation control and the OK button to move through
menu selections and apply your desired settings. To close the menu anytime, press the menu button
again.
Record Menu
The Record menu allows you to change modes, and setup
other capture settings.
To go to Record Menu:
Turn on the camera by pressing Power button.
to launch the Record Menu.
Press
or
keys to move through the menu
Use the
or OK button.
To select an item, press
Change the submenu settings using the 4-way
navigation control.
5. Press the OK button to save and apply settings.
1.
2.
3.
4.
38
Setting the Drive Mode
Your camera features a Self-timer and Burst which can be
set in the Drive mode function in the Record Menu. The
Self-timer allows you to take images after a pre-defined
delay. While burst lets you take consecutive shots. This
function is only available in recording still images. The
Drive mode setting is automatically set to off when you
turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
or
keys to go through the selection.
2. Use the
3. Press the OK button to save and apply changes.
The table below shows the available Drive mode settings.
Icon
Item
Description
Off
Captures an image without time delay.
10 Sec.
Sets a 10-second delay to capture image after pressing the Shutter
button.
2 Sec.
Sets a 2-second delay to capture image after pressing the Shutter
button.
Double
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the image again.
Setting the AF Area
AF stands for Automatic Focus. This feature determines
the area on which the camera focuses.
To set AF Area
1. From the Record menu, select AF Area.
or
keys to go through the selection.
2. Use the
3. Press the OK button to save and apply changes.
The table below shows the available AF area settings.
Icon
Item
Description
Wide
The camera automatically selects focus area within the wide frame.
Center
The focus area is fixed on the center.
Setting the AF Lamp
39
The AF Lamp function allows you to record images even
low light conditions.
If AF Lamp is set to Auto, the AF lamp located in the front
of the camera, see "Front View" on page 7, emits an red
light by half pressing the Shutter button allowing the
camera to focus easily.
To set AF Lamp
1. From the Record menu, select AF Lamp.
2. Use the
or
keys to go through the selection.
3. Press the OK button to save and apply changes.
Setting Sharpness
This function allows you to enhance or soften finer details
of your images.
To set Sharpness
1. From the Record menu, select Sharpness.
2. Use the
or
keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available Sharpness settings.
Icon
Item
Description
High
Sharpens the image.
Normal
Normal sharpness.
Low
Softens the image.
Setting Saturation
The Saturation function lets you adjust the color
saturation in your images. Use a higher saturation setting
for rich colors and a lower saturation setting for more
natural tones.
To set Saturation
1. From the Record menu, select Saturation.
or
keys to go through the selection.
2. Use the
3. Press the OK button to save and apply changes.
The table below shows the available Saturation settings.
Icon
Item
Description
High
Enhance the saturation.
Normal
Normal saturation.
Low
Reduce the saturation.
Setting Contrast
40
This function allows you to adjust the contrast of your
images.
To set Contrast
1. From the Record menu, select Contrast.
2. Use the
or
keys to go through the selection.
3. Press the OK button to save and apply changes.
Icon
Item
Description
High
Enhance the contrast
Normal
Normal contrast
Low
Reduce the contrast
Setting the Digital Zoom
This feature controls the digital zoom mode of your
camera.
Your camera enlarges an image using the optical zoom
first. When the zoom scale exceeds 21X, the camera uses
digital zoom.
To set Digital Zoom
1. From the Record menu, select Digital Zoom.
2. Use the
or
keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available Digital Zoom settings.
Icon
Item
Description
Intelligent Zoom
Enlarges the image digitally with almost no distortion. This feature is
available for still images only.
Standard Zoom
Enlarges all image sizes up to a maximum of 5x in preview, but the
image quality deteriorates.
Off
Uses the optical zoom only.
• Digital Zoom is not available in Face tracking on, Movie, and Voice Recording
modes.
• The maximum Intellect zoom scale varies depending on the image type and
resolution.
41
Setting the Date Stamp
The date of recording can be printed directly on the still
images. This function must be activated before the image
is captured. Once date and time are stamped on an image,
they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
• Available for still images only.
• May slow down AEB/ Burst mode when Date Stamp
is enabled in AEB/ Burst mode.
• In vertical or rotated images, the date and time on
your images still appear horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the
or
keys to go through the selection.
3. Press the OK button to save and apply changes.
Setting Auto Review
The Auto Review function lets you view the captured
image right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
1. From the Record menu, select Auto Review.
or
keys to go through the selection.
2. Use the
3. Press the OK button to save and apply changes.
Setting Stabilizer
This function allows you to prevent blurred images caused
by shaking.
1. Enable the Stabilizer under the Record Menu.
or
keys to go through the selection.
2. Use the
3. Press the OK button to save and apply changes.
42
Playback
You can playback the still images, video and audio clips on the LCD monitor.
Viewing in Single Navigation
The Single navigation mode displays the image one by one on the LCD monitor. To view
images/videos/audio clips, follow the steps below.
on the camera.
1. Press the Playback button
2. The LCD monitor displays an image. To understand the icons and other information on the screen,
please see "Photo Mode Screen Layout" on page 16.
Still Image
Video
Audio Clip
3. Use the
or
keys to view next/previous image/video/audio.
4. To play a video or audio clip, press the OK button. See "Playing Videos" on page 44 and "Playing
Voice Recording" on page 45 for more details.
Viewing Thumbnails
This function allows you to view 9-thumbnail images or by calendar mode on the LCD monitor at the
same time. Searching numerous of images is much easier then single view navigation.
To set 9-images mode
1.
2.
3.
4.
Press the Playback button
on the camera.
Spin the Zoom lever counterclockwise (left) once to enter 9-images mode.
Use the navigation controls to move through the items.
Press the OK button to select the image and view it normally.
Scroll bar.
If scroll bars appear, it indicates that the screen can be scrolled.
Thumbnail view
To set calendar mode
1. Press the Playback button
on the camera.
2. Spin the Zoom lever counterclockwise (left) twice to
view thumbnails in calendar mode.
3. Use the navigation controls to move through the items.
4. Press the OK button to select an image and view it
normally.
In calendar mode:
• The first file (Including image, video, audio and error file) recorded on each date
appears on the screen.
• Spin the Zoom lever clockwise (right) would back to 9-images mode.
43
Thumbnail icons:
When you view the thumbnails, some images may contain icons. These icons indicate the type of file or
recording.
Icon
Type
Description
Voice Record
Indicates a voice recording file.
File Error
Indicates an error file.
Zooming images
The zoom view function works with still images only.
• In normal view, spin the Zoom lever clockwise (right)
repeatedly until the desired zoom view.
• The 4 arrows on the LCD monitor indicate that the
image is zoomed in.
• You can zoom to view an image of up to 12X.
• Use the navigation controls to view the zoomed image.
• Press the Menu button to close zoom view.
For keeping the image definition, you can only zoom in up to 7.2X for VGA (640x480)
and 16:9 videos, 3.6X for 320x240 images and panorama photos.
Playing Videos
1. Press the Playback button
on the camera.
2. Use the navigation controls to scroll through the
saved images. A video clip has a video icon displayed
on screen.
3. Press the OK button to play the video.
or
keys
4. During playback, press and hold the
to fast forward or rewind the video. The camera
supports forward and rewind speed of up to 4x.
5. During playback, use the Zoom lever to control
volume. Spin clockwise (right) to increase
volume/Spin counterclockwise (left) to decrease
volume.
key to pause playback. Press the key
6. Press the
again to resume. When paused, the play info will
remain on screen except
.
7. To forward or rewind the video frame by frame, press
to pause playback, then press the
or
the key
keys.
key to stop the playback. The LCD
8. Press the
monitor displays the video frame image in Single
navigation mode.
• The play info, except the icon
, will be displayed when the video is
paused, during REW/FF or frame by frame modes
• Volume cannot be adjusted when paused or during REW/FF modes.
44
To capture screenshot image from a video clip
1. During playback of video, press the key
to pause
playback on your desired video frame to capture.
2. Press the Shutter button to capture a screenshot.
3. The camera stop playback. The LCD monitor displays
the captured image in Single navigation mode.
This feature does not function when pressing shutter key and PV displays memory full
or the folder cannot be created msg.
Playing Voice Recording
1. Press the Playback button
on the camera.
2. Use the navigation controls to scroll through the
saved images. When viewing a voice recording file,
the LCD monitor displays the screen layout of Audio
clips. See picture on the right.
3. Press the OK button to play the voice recording.
4. During playback, use the Zoom lever to control
volume. Spin clockwise (right) to increase
volume/Spin counterclockwise (left) to decrease
volume.
key to pause playback. Press the
5. Press the
key again to resume. When paused, the play info will
remain on screen except
.
key to stop the playback. The LCD
6. Press the
monitor displays the image in Single navigation mode.
Volume cannot be adjusted during Pause mode.
Playing Voice Memo
Voice memo is separately recorded and attached to a captured image. See "Voice Memo" on page 50
on how to record voice memo.
on the camera.
1. Press the Playback button
2. Use the navigation controls to scroll through the
saved images. An image file with voice memo has a
voice memo icon located on the top center of the LCD
monitor. See picture on the right.
3. Press the OK button to play the voice recording.
4. During playback, use the Zoom lever to control
volume. Spin clockwise (right) to increase
volume/Spin counterclockwise (left) to decrease
volume.
to pause playback. Press the key
5. Press the key
again to resume. When paused, the play info will
remain on screen except
.
to stop the playback. The LCD
6. Press the key
monitor displays the image in Single navigation mode.
Volume cannot be adjusted when you pause the voice memo.
45
Deleting an Image/Video/Audio
There are two ways to delete an image/video/audio:
• Using the Delete button.
• Using Playback Menu Delete settings. See "Delete" on page 47.
Using the Delete Button
Use the Fn/Delete button on your camera to delete an image/video/audio clip.
1. Press the Playback button
on the camera.
2. View images/videos/audio clips in Single navigation
mode.
or
keys to scroll the display.
3. Use the
4. When the desired image/video/audio clip is displayed
on the LCD monitor, press the Fn/Delete button.
5. A confirmation selection appears on screen.
6. Select Delete.
7. Press the OK button to delete.
8. The next image is displayed on the LCD monitor. To
or
keys to scroll
delete another file, use the
through the images/videos/audio clips. Then, repeat
steps 6 to 7.
9. To close the Delete function and go back to the single
navigation mode, select Cancel.
Locked files cannot be deleted at any time. When you try to delete a locked file, the
camera displays "File Locked" message on the LCD monitor.
Playback Menu
The Playback menu allows you to edit images, record voice memo, and setup playback settings.
To go to Playback Menu:
1. Press the Playback button
on the camera.
2. Press Menu button to launch the Playback Menu.
3. Use the
or
keys to move through the menu
selections.
4. To select a menu, press
or the OK button.
5. Change the submenu settings using the 4-way
navigation control.
6. Press the OK button to save and apply settings.
46
Delete
The Delete function allows to remove unwanted files in the internal memory or on the memory card.
Protected files cannot be erased, to delete, unprotect the file first. See "Protect" on page 49.
To delete an image/video/audio clip:
1. From the Playback menu, select Delete.
2. The Delete submenu is displayed on the LCD monitor.
Available select settings:
• Single. Select one file to delete.
• Voice Only. Delete only the attached voice
memo, not voice clips. The image is still retained
in the memory.
• Multi. Select multiple files to delete at the same
time.
• All. Delete all files.
To delete a single file:
1. Select Single in the Delete submenu, the images are
displayed on the LCD monitor in single navigation
mode.
or
keys to scroll the display.
2. Use the
3. When the desired image/video/audio clip is displayed
on the LCD monitor, select Delete.
4. Press the OK button to delete.
5. The next image is displayed on the LCD monitor. To
or
keys to scroll
delete another file, use the
through the images/videos/audio clips. Repeat steps
3 to 4.
6. To close the Delete function and go back Playback
menu, select Cancel.
To delete attached voice memo:
1. Press the Playback button
on the camera.
2. View images/videos/audio clips in Single navigation
mode.
or
keys to scroll until the desired
3. Use the
image with voice memo is displayed on the screen.
4. Press Menu button to launch the Playback Menu.
or
keys to move through the Playback
5. Use the
menu selections then select Delete.
6. From the Delete submenu, select Voice only.
7. A confirmation selection appears, select Yes.
8. Press the OK button to delete the attached voice
memo and go back to Playback mode.
The Voice Only submenu is disabled if the current image displayed, at the time you
access the Delete menu, does not have any attached voice memo.
To delete multiple files:
1. Select Multi in the Delete submenu, the images are
displayed in thumbnail view on the LCD monitor.
2. Use the navigation control to move through the files.
3. When the desired image/video/audio clip is
highlighted, press the OK button to mark
image/video/audio clip for deletion.
4. Repeat step 3 until all desired images for deletion are
marked.
5. Press the MENU button. A confirmation selection
appears.
47
6. Select Yes to confirm.
7. Press the OK button to delete marked files.
To delete all files:
1. Select All in the Delete submenu. A confirmation
message appears.
2. Select Yes.
3. Press the OK button to delete all files.
Slide Show
The slide show function enables you to playback your still images automatically in order one image at
a time.
To view slideshow:
1.
2.
3.
4.
5.
From the Playback menu, select Slide Show. The Slideshow menu appears.
Set the slide show settings.
Select Start, then press the OK button to start the slide show.
During slideshow, press the OK button to pause slide show.
or
keys to move through the options. Select whether to Continue or Exit the
Use the
slide show.
6. Press the OK button to apply selected option.
To change slide show settings:
1. From the Slide show menu, use the
or
keys t
to move through the selections.
2. Select Interval setting. Press the
or
keys to
adjust. Choose among the available interval settings:
1 sec., 3 sec., 5 sec., and 10 sec.
or
keys to
3. Select Transition setting. Press the
adjust. Choose among the available transition
.
settings:
or
4. Select Repeat setting. Press the
adjust. Available settings are: Yes, No.
keys to
48
Protect
Set the data to read-only to prevent images from being erased by mistake.
A protected file has a lock icon
when viewed on Playback mode.
To protect files:
1. From the Playback menu, select Protect.
2. The Protect submenu is displayed on the LCD monitor.
Available select settings:
• Single. Select one file to lock/unlock.
• Multi. Select multiple files from the thumbnail view
to lock/unlock.
• Lock All. Lock all files
• Unlock All. Unlock all files.
To protect/unprotect a single file:
1. Select Single in the Protect submenu, the images are
displayed on the LCD monitor in single navigation
mode.
or
keys to scroll the display.
2. Use
3. When the desired file is displayed on the LCD monitor,
press the OK button to select Lock/Unlock.
4. To close the protect/unprotect function and go back
Playback menu, select Exit.
To protect/unprotect multiple files:
1. Select Multi in the Protect submenu, the images are
displayed in thumbnail view on the LCD monitor.
2. Use the navigation control to move through the files.
3. When the desired file is highlighted, press the OK
button to mark/unmark the file clip for protection.
4. Repeat step 3 until all desired files to protect are
marked.
5. Press the MENU button. A confirmation selection
appears.
6. Select Yes.
7. Press the OK button to lock files and go back to
Playback mode.
To protect all files:
1. Select Lock all in the Protect submenu. A confirmation
message appears.
2. Select Yes.
3. Press the OK button to lock all files.
To unlock all files:
1. Select Unlock all in the Protect submenu. A
confirmation message appears.
2. Select Yes.
3. Press the OK button to unlock all protected files.
Red-eye Correction
49
The Red-eye Correction function is used to reduce red eye in captured images. This function is only
available for still images. Red-eye correction can be applied to an image several times, but the quality
may gradually deteriorate.
To activate Red-eye Correction:
1.
2.
3.
4.
5.
6.
7.
Press the Playback button
on the camera.
or
keys to scroll and select an image.
Press the
Press the MENU button to launch the Playback menu.
Select Red-eye Correction.
Select Start.
Press the OK button to start correction.
After completing Red-eye correction, a menu
selection appears. Select whether to:
• Overwrite. Save and replace old file with a new
one.
• Save As. Save the new file as a new one.
• Cancel. Cancel red-eye correction.
8. Press the OK button to save/cancel changes.
Voice Memo
A maximum of 30 seconds of audio can be recorded as a memo for captured still images.
To record voice memo:
1.
2.
3.
4.
5.
6.
Press the Playback button
on the camera.
or
keys to scroll and select an image to attach voice memo to.
Press the
Press the MENU button to launch the Playback menu.
Select Voice Memo.
Select Start, then press the OK button to start recording.
Press the OK button again to stop recording.
Time left (n seconds) for recording.
When you record voice memo to an image with an existing voice memo, the old
recording file would be replaced by the new one.
50
Color Mode
The Color Mode function lets you adjust edit still images to apply different colors or tones for a more
artistic effect. Edited images in this function are saved as a new file.
To activate Color Mode:
1.
2.
3.
4.
Press the Playback button
on the camera.
or
keys to scroll and select an image to edit.
Press the
Press the MENU button to launch the Playback menu.
Select Color Mode. The Color Mode submenu appears.
or
keys to scroll and select an option. As you move through the selection, the
5. Press the
preview on the LCD monitor changes synchronously.
The succeeding table shows the available settings.
Icon
Item
Description
Normal
No effect is added to the image.
Sepia
Image is saved with a sepia tone.
B&W
Image is saved in black and white.
Negative
Image appears to be the opposite of the original image.
Mosaic
Image is saved with mosaic tiles.
Vivid Red
Image is saved with reddish tint.
Vivid Green
Image is saved with greenish tint.
Vivid Blue
Image is saved with bluish tint.
51
Trim
The Trim function allows you to trim an image to another image size. This function is only available for
still images.
To trim an image:
1. Press the Playback button
on the camera.
or
keys to scroll and select an image
2. Use the
to trim.
3. Press the MENU button to launch the Playback menu.
4. Select Trim. The Trim screen layout is displayed on
the LCD monitor.
5. Use the Zoom lever to change size as zoom in/out.
No.
Description
1
Enlarged image
2
4-way indicator
3
Trimmed size
4
The approx. location of the trimmed area
5
Image area
6. Use the navigation controls to move the image.
7. Press the OK button to apply changes. A menu selection appears.
8. Select whether to:
• Overwrite. Save and replace the old file with the new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel Trim.
9. Press the OK button to save/cancel changes.
• Trim function is not available for images with image size set to VGA.
• All images will be trimmed in 4:3 ratio regardless of its original image ratio.
52
Resize
Resizes a previously saved image and only resizing to a smaller size is available.
To resize an image:
1. Press the Playback button
on the camera.
2. Use the
or
keys to scroll and select an image
to resize.
3. Press the MENU button to launch the Playback menu.
4. Select Resize. The Resize submenu is displayed on
the LCD monitor.
5. Select size among: 8M, 5M, 3M, and VGA. Available
size settings may vary depending on original image
size. Unavailable settings appear as gray icons in
Resize submenu.
6. After selecting size, a menu selection appears. Select
whether to:
• Overwrite. Save and replace old file with a new
one.
• Save As. Save the new file as a new one.
• Cancel. Cancel resize.
7. Press the OK button to save/cancel changes.
Resize function is not available for images with image size set to VGA.
Startup Image
You can specify the startup image from the captured images for camera.
1. Press the MENU button to launch the Playback menu.
2. Select Startup Image. The menu selection appears.
3. Select options:
• System. Use camera default image.
or
keys to scroll and
• My Photo. Use the
select desired image.
• Off. Disable the startup image.
4. Press the OK button to apply changes.
The startup image will still be displayed startup even if the selected image was
deleted.
53
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing
information on your memory card. You can select the images to be printed and how many prints to
make with the DPOF menu in the camera and insert the memory card to the card compatible printer.
When the printer starts printing, it will read the embedded information on the memory card and print
the specified images.
To set DPOF:
1. Press the MENU button to launch the Playback menu.
2. Select DPOF. The submenu appears. Available
settings are as follows:
• Single. Select a single image to mark.
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial default
settings.
To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
or
keys to scroll and
2. For single image, use the
select an image to mark for printing.
or
to
3. Specify the number of copies. Use the
increase/decrease number.
4. Press the Function/Delete button to toggle between
turning on/off the date stamp.
5. Press the OK button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu. A confirmation
message appears.
2. Select Yes.
3. Press the OK button to reset DPOF settings.
Radial Blur
The Radial Blur is an effect creates blurs around a point.
To set Radial blur for an image:
1. Use the
or
keys to specify the level of
blurs. The adjusting result on preview
synchronously while selecting the level.
2. Press the OK button to proceed save options.
3. Available settings are as follow:
• Overwrite. Save and replace the old file with
a new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel Radial blur.
54
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
1. Press Menu button to launch the Record/Playback
Menu.
or
keys to switch the menu tab to
2. Use the
Setup menu.
3. Use the
or
keys to move through the menu
selections.
key.
4. To select an item, press the OK button or
5. Change the submenu settings using the 4-way
navigation control.
6. Press the OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1. From the Setup menu, select Sounds.
2. Adjusts sound settings.
3. Press the OK button to apply changes.
Item
Available Settings
Description
Startup
Sound 1, Sound 2,
Sound 3, Off
Selects the startup sound when camera is turned on.
Shutter
On, Off
Enables or disables shutter sound when Shutter button is
pressed. Shutter sound is not available when recording
videos or voice clips.
Beep
volume
0-4
Adjusts volume.
Setting Power Save
The Power Save function allows you to set an idle time after
which the camera automatically sets to sleep mode to save
power. After a minute of being in sleep mode, the camera
eventually turns off power.
This
•
•
•
function is not available in the following instances:
Recording a video or audio file
Playing a slideshow/video/audio file
Using the USB connector
55
Setting LCD Save
Enable the LCD Save function to automatically decrease the
LCD brightness to conserve battery power. When the
camera is idle for 20 seconds, the LCD darkens. Press any
button to resume to normal brightness.
•
The camera is idle when no buttons are pressed. LCD
Save, though enabled, does not function during video
playback, slideshow and video recording.
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is useful in
attaching date stamps on captured images. Your camera uses a 24-hour time format.
1. Press the navigation controls to adjust date and time
or
keys, the
value. By holding down the
numeric values changes continuously.
2. Press the OK button to apply changes.
Setting Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Use the navigation control to scroll through the list
and select the desired language.
2. Press the OK button to confirm and apply settings.
Setting File Numbering
This function allows you to select the method in which to assign file numbers to images.
Available settings are:
• Series. Assigns number to files in sequence even if
the folder is changed.
• Reset. The file numbering will start from 0001 each
time the folder is changed and "Format" is processed.
To understand folder and file structure of your camera, see
"About Folder and File Names" on page 63.
56
Setting TV Out
Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV
out is not set correctly, the image may not display properly on TV.
Available settings are:
• NTSC. Applicable in Japan, USA, Canada, Taiwan and
others.
• PAL. Applicable in Europe, Asia (excluding Taiwan),
Oceania and others.
Setting LCD Brightness
Select a brightness level for the LCD monitor.
Available settings are:
• Auto. Auto detects the LCD brightness.
• Bright. Enhance the LCD brightness.
• Normal. Normal LCD brightness.
Setting Battery Type
Select the type of the battery to ensure the camera shows
the correct battery level on screen.
Available settings are:
• Alkaline
• Ni-MH
• Lithium
Setting Memory Kit
This utility formats the internal memory (or memory card) and erases all stored images and data.
Available settings are:
• Format. Select to format currently used memory.
• Copy to Card. Select to copy all files stored in the
internal memory to the memory card.
• If the images were saved in the internal memory when inserting memory card
into the camera. You can use Copy to Card function in order to copy all images
from the internal memory into memory card.
• If there is no memory card or the internal memory is empty or plug in lock card,
the Copy to Card function is disabled.
57
Reset All
Use this function to reset the camera to its factory settings.
However, the following settings are exceptions and not
affected by Reset.
• Date & Time
• Language
• TV Out
• Custom White Balance data
58
Making Connections
Connecting the Camera to a PC
You can transfer images, videos and audio files to
your PC.
1. Connect one end of the USB cable to an
available USB port on your computer
2. Connect the other end of the USB cable to the
USB terminal on the camera.
3. Turn on the camera.
4. The USB mode menu appears on the screen.
or
key
Select Computer by using the
and press the OK button.
5. The PC starts to detect the connection while the
LCD monitor appears Connecting…
6. Connection established after PC MODE
appeared on the LCD monitor
7. Access the files in the camera by your PC.
59
•
•
The camera’s internal memory and memory card would display as removable
drives in PC.
After the connection, no image is displayed on the LCD monitor.
60
Connecting the Camera to a Printer
You can print your images directly using a PictBridge compatible printer.
1. Turn on your Printer. Check that
the printer is turned on, there is
paper in the printer, and there are
no printer error messages.
2. Connect one end of the USB cable
to the printer while the other end
to USB terminal on the camera.
3. The USB mode menu appears on
the screen. Select Printer by using
or
key and press the
the
OK button.
4. Enter the print mode and print the
selected images.
For details on the following page
"Setting the Print Mode Menu".
61
Setting the Print Mode Menu
Print Mode menu appears on the screen after the connection between a printer and your camera is
established.
Print Mode includes three major settings:
• Print Select. An image can then be selected to print.
• Print All. Prints all images.
• Print Index. Prints all images as thumbnails.
To set Print Select
1. Use the
or
keys to scroll and select an image
for printing.
or
key
2. Specify the number of copies. Use the
to increase/decrease number.
3. Press the Function/Delete button to toggle between
turning on/ off the date stamp.
4. Press the OK button to enter printer settings.
To set Print All and Print Index
Repeat the same steps 2 to 4, then enter printer settings.
To set Printer Settings
1. Use the
or
key to specify a print option.
2. Modify paper size and quality by the
or
keys.
Available setting:
• Paper size: Default / A4 / 4"x6"
• Quality: Default / Fine / Normal
3. Select Print on the screen for printing.
Or Cancel to go back Print Mode.
Start Printing
• LCD monitor appears "Now printing…".
• Or press Menu button to stop printing anytime.
62
Appendix
About Folder and File Names
Your camera automatically creates specific directory of folder in the internal memory cards to organize
captured images, videos and audio files.
File Naming
File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File
numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display
the warning message "Folder cannot be created". When this happens, try one of the following ways:
• Reset the file number. See "Setting File Numbering" on page 56.
Do not change the folder and file names in the memory card using your PC. It may be unable
to playback the data using the camera.
Troubleshooting
Problem
Cause and/or Action
Camera does not turn on.
The batteries may be exhausted. Replace the batteries.
Camera turns off
automatically.
Press Power button to turn on the camera.
LCD turns dark.
Press any button except the Power button to turn on the LCD.
Empty battery icon is
displayed on the LCD,
then the camera turns off.
Batteries are exhausted, please replace the batteries.
LCD monitor displays
"No image".
There is no image file in the memory card. Image file format may not
be supported.
LCD monitor displays
"Not available for this
file".
Function is only available for specific file types. File format is not
supported.
LCD monitor displays
"Memory full".
Memory card is full. Replace the memory card with a new one or delete
unnecessary images.
LCD monitor displays
"File locked".
This file is locked. Unlock the file. See "Protect" on page 49.
LCD monitor displays
"Card locked".
The memory card is protected. Remove the card and slide the
write-protect switch to its unlock position.
LCD monitor displays
"Format error".
The card may be damaged. You can either change the card or wipe to
clean the connected points.
LCD monitor displays
"Copy error".
The memory card is protected. Remove the card and slide the
write-protect switch to its unlock position.
The memory card is full. Replace card or delete unnecessary files.
No image displays on the
TV screen.
Incorrect TV-out type was selected. Set the correct TV-out type to
match your TV system.
The lens got stuck up.
Do not force the lens to go back.
The type of the battery used may be incorrect or the battery power
level is too low. Change the battery before using the camera.
Specifications
Sensor
Sony 16M CCD
63
Lens
LCD monitor
Focusing Range
Aperture
Shutter
File Format
Resolution (Photo)
Focal Length: 4.5 (W) ~ 94.5 (T) mm
21X optical zoom, 5x digital zoom
3.0" Color LCD
Normal: Wide: 100cm ~ infinity
Middle: 80cm ~ infinity
Tele: 150cm ~ infinity
Macro: Wide: 50cm ~ 100cm
Middle: 1cm ~ 80cm
Tele: 150cm ~ infinity
1:3.1~5.8
Shutter Speed:
Auto: 1 - 1/2,000 sec.
Manual: 15 - 1/2,000 sec.
Night: 15 - 1/2,000 sec.
Fireworks: 2 sec.
Still Image: EXIF 2.3 compatible format (JPEG compression)
Video: AVI (MJPEG)
Audio: WAV
16M (4608 x 3456), 3:2 (4608 x 3072), 8M (3264 x 2448), 5M (2592 x 1944),
3M (2048 x 1536), 16:9 (1920 x 1080), VGA (640 x 480)

Resolution (Movie)



Scene Mode
Mode dial
1280 x 720 (16:9) (Support SDHC_Class(6))
640 x 480
320 x 240
640 x 480 (Web)
Portrait, Landscape, Sunset, Backlight, Kids, Night Scene, Fireworks, Snow,
Sports, Party, Candlelight, Night Portrait, Soft Skin, Flowing Water, Food,
Building, Text, Foliage, Auction, Smile Capture, Blink Detection,
Pre-Composition, Love Portrait, Self Portrait, D-Lighting, Fisheye Lens, Voice
Recording
Intelligent Scene, Scene mode, Continuous Shooting, Photo Stitch, Manual
Exposure, Aperture Priority, Shutter Priority, Program
ISO Equivalent
Auto, 100, 200, 400, 800, 1600, 3200 (3M, 16:9 <2M>, VGA),
6400 (3M, 16:9 <2M>, VGA)
White Balance
Auto, Daylight, Cloudy, Tungsten, Fluorescent 1, Fluorescent 2, Custom
Exposure Control
Metering
Drive Mode
Flash
Color Mode (Preview)
+2.0EV / +1.7EV / +1.3EV / +1.0EV / +0.7EV / +0.3EV / 0EV / -0.3EV / -0.7EV/
-1.0EV / -1.3EV / -1.7EV / -2.0EV
Multi, Center, Spot
Off, 10 sec., 2 sec., Double
Auto, Red-eye Reduction, Forced On, Slow Sync, Forced Off
Normal, Stylish, Vivid, Sepia, Color Accent (Red), Color Accent (Green),
Color Accent (Blue), B&W, Vivid Red, Vivid Green, Vivid Blue
Color Mode
Normal, Sepia, B&W, Negative, Mosaic, Vivid Red, Vivid Green, Vivid Blue
Storage
Internal memory: 128MB flash memory
External memory: SD (up to 4GB), SDHC card (up to 32GB guaranteed),
SDXC card (up to 64GB guaranteed)
OSD Language
64
Interface
USB/AV OUT
TV system
NTSC/PAL (selected by Setup MENU)
Battery
Operating Temperature
Operating Humidity
0º C - 40º C
0% - 90%
Microphone
Built-in
Speaker
Built-in
Dimensions
Weight
*
AA battery X4
Approx. 112.5 x 75.9 x 63.4 mm
Approx. 355 g (no battery)
Design and specifications are subject to change without notice.
65
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising