HP Officejet 5510 All-in-One Printer Installation guide

HP Officejet 5510 All-in-One Printer Installation guide
1
Windows users START HERE
2
Unpack the device
3
Turn on the computer
4
Begin software installation
a
This side of the poster is for Windows users only.
a
Follow the steps on this poster in order.
Windows PC
If nothing appears on your computer screen after you insert the CD, see the Troubleshooting Information
chapter in the Reference Guide.
Turn on your computer and wait for
the Windows PC desktop to appear.
Do not connect the USB cable until the software
prompts you to do so.
b
Close any open programs.
When you see the Set Up Your Device Now screen, leave your computer and proceed to step 5 on this
poster. Do not connect the USB cable yet.
b
a
Windows 98,
2000, ME, XP
Windows PC desktop
b
Q3434-90196
*Q3434-90196*
*Q3434-90196*
Insert the Windows HP Officejet CD and follow the onscreen instructions.
5
Attach the front panel covers
6
Load plain white paper
a
a Align the larger cover over the buttons on the top of the
Connect the power cords
7
8
c
b
Connect the supplied phone cord to the open
1-LINE jack on the left.
HP Officejet and snap into place.
To connect other equipment such as an answering
machine, or to use a different cord, see the Fax
Setup chapter in the Reference Guide.
b Align the smaller cover over the buttons on the front of the
HP Officejet and snap into place. Make sure all the buttons
can move freely.
a
Connect the supplied phone cord
c
1
2
b
a
Windows setup poster
hp officejet 5500 series all-in-one
9
Connect the USB cable
10
b
Turn on the device and set the language and country/region
11
Open the print-carriage access door
Door
Make sure that you see the Set Up Your Device
Now screen on your computer, then connect the
USB cable. Do not connect the USB cable to a
keyboard or a non-powered USB hub.
a
Press the On button to turn on the device. Wait for the display prompt.
b
Select your language, then press the OK button.
c
Select your country/region, then press the OK button.
Lift the print-carriage
access door. The print
carriage slides to the
middle.
a
b
c
12
Insert and align the print cartridges
13
Tri-color
Finish software installation
Black
a
b
c
d
e
Remove the bright pink
tape from the print
cartridges. Do not touch
the gold-colored contacts
or retape the cartridges.
Hold the black print cartridge with the large HP
label and the raised markings on top. Slide the
cartridge at a slight angle into the right side of the
print carriage.
Hold the color print cartridge with the large HP label and the raised
markings on top. Slide the cartridge at a slight angle into the left
side of the print carriage.
Close the print-carriage access door and press the OK
button. Within a few minutes, a print cartridge alignment
page prints.
Press the OK button.
Press firmly until the print cartridge snaps into place.
Press firmly until the print cartridge snaps into
place.
Make sure that both print cartridges are secure.
Place the alignment page face down in the left front
corner of the glass. Close the lid.
When "Alignment is complete"
appears on the display, alignment
is complete. Discard or recycle the
alignment page.
a
Hardware setup is now complete. Return to your computer.
b
Click Next on the screen with the green checkmark. Depending on your system, it may take 20
minutes or more to finish installing the software.
c
After you restart your computer, the Fax Setup Wizard appears. Follow the onscreen instructions.
When the Congratulations screen appears, you are ready to use your HP Officejet.
If you encounter problems during setup, see the Reference Guide.
a
b
c
www.hp.com/support Copyright Hewlett-Packard Company 2003
Printed in Singapore/Malaysia
1
2
Macintosh users START HERE
3
Unpack the device
4
Attach the front panel covers
Load plain white paper
a
Macintosh
Follow the steps on
this poster in order.
a
Align the larger cover over the buttons
on the top of the HP Officejet and snap
into place.
b
Align the smaller cover over the buttons
on the front of the HP Officejet and
snap into place. Make sure all the
buttons can move freely.
Macintosh OS 9, OS X
5
6
Connect the supplied phone cord
7
Connect the power cords
c
Connect the supplied phone cord to
the open 1-LINE jack on the left.
a
9
10
Open the print-carriage access door
Turn on the device and set the
language and country/region
8
Connect the USB cable
If you have an iMac, the
USB port is on the side.
Do not connect the HP
Officejet to a USB port
on a keyboard or a nonpowered USB hub.
To connect other equipment such as
an answering machine, or to use a
different cord, see the Fax Setup
chapter in the Reference Guide.
Macintosh setup poster
hp officejet 5500 series all-in-one
1
2
Q3434-90196
*Q3434-90196*
*Q3434-90196*
This side of the poster
is for Macintosh users
only.
c
b
a
Press the On button to turn on the
device. Wait for the display prompt.
b
Select your language, then press the OK
button.
c
Select your country/region, then press
the OK button.
b
Insert and align the print cartridges
Tri-color
Black
Door
a
Lift the print-carriage
access door. The print
carriage slides to the
middle.
11
a
Remove the bright pink
tape from the print
cartridges. Do not touch the
gold-colored contacts or
retape the cartridges.
b
Hold the black print cartridge with the large
HP label and the raised markings on top.
Slide the cartridge at a slight angle into the
right side of the print carriage.
Press firmly until the print cartridge snaps
into place.
Insert the Macintosh
HP Officejet CD.
Hold the tri-color print cartridge with the large HP
label and the raised markings on top. Slide the
cartridge at a slight angle into the left side of the print
carriage.
Press firmly until the print cartridge snaps into place.
b
c
Double-click the
HP All-In-One Installer
icon on the desktop.
hp_all-in-one_installer
Follow the onscreen
instructions. You may
have to restart your
Macintosh during setup.
Be sure to complete the
setup assistant.
d
Close the print-carriage access door and
press the OK button. Within a few minutes, a
print cartridge alignment page prints.
Place the alignment page face down in the
left front corner of the glass. Close the lid.
Make sure that both print cartridges are secure.
12
Install the software
Turn on your Macintosh
and wait for it to finish
starting up.
c
e
Press the OK button.
When "Alignment is
complete" appears on the
display, alignment is
complete. Discard or recycle
the alignment page.
Try the HP Officejet
Congratulations! You are now ready
to use the HP Officejet. Select the HP
Director icon in the dock to get
started.
If you encounter problems during
setup, see the Reference Guide.
www.hp.com/support
Copyright Hewlett-Packard Company 2003
Printed in Singapore/Malaysia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement