Sony KP-41PX1 Projection Television Instruction manual

01COVER.fm Page 1 Monday, June 4, 2001 4:22 PM
4-206-027-11(1)
R
Projection TV
Instruction Manual
Bedienungsanleitung
GB
DE
Mode d’emploi
FR
Οδηγίες Χρήσης
GR
Manuale d’Istruzioni
Gebruiksaanwijzing
Kullanwm Kwlavuzu
KP-41PX1
© 2001 by Sony Corporation
IT
NL
TR
01GB.fm Page 3 Monday, June 4, 2001 3:47 PM
Projection TV
Instruction Manual
Thank you for choosing this Sony projection TV.
Before operating the projection TV, please read this manual thoroughly and retain
it for future reference.
Reading and Understanding this Instruction Manual:
• Use Getting Started if you wish to install the projection TV set and to get familiar
with the basic functions.
• Use Advanced Operati if you wish to know more about the additional features
of the projection TV set.
•
Symbols used in the manual:
•
Informs you of possible hazards.
•
Important information.
•
Information on a feature.
• 1,2... Sequence of instructions.
•
MENU
K
Shaded buttons on the remote control show the buttons you have to press
to follow the sequence of instructions.
•
Informs you of the result of the instructions.
•
The process continues on the next page to get final result.
3
GB
01GB.fm Page 4 Monday, June 4, 2001 3:47 PM
Safety Information
This set is to operate on a 220-240V
AC supply only. Take care not to
connect too many appliances to the
same power socket as this could
result in fire or electric shock.
For environmental and safety
reasons, it is recommended that the
TV set is not left in standby mode
when not in use. Disconnect from
the mains.
Never push objects of any kind into
the set as this could result in a fire or
electric shock. Never spill liquid of
any kind on the set. If any liquid or
solid object does fall through, do not
operate the TV. Have it checked
immediately by qualified personnel.
Do not open the cabinet and the rear
cover of the TV. Refer to qualified
service personnel only.
For your own safety, do not touch
any part of the TV, power lead or
aerial lead during lightning storms.
To prevent fire or shock hazard,
do not expose the TV to rain or
moisture.
Do not cover the
ventilation openings of the TV For
ventilation, leave a space of at least
10cm all around the set.
Never place the TV in hot, humid or
excessively dusty places. Do not
install the TV where it may be
exposed to mechanical vibrations.
To prevent fire, keep inflammable
objects or naked lights (eg candles)
away from the TV.
Clean the TV with a soft, lightly
dampened cloth. Do not use
benzine, thinner or any other
chemicals to clean the TV. Do not
scratch the TV screen. As a safety
precaution, unplug the TV before
cleaning it.
Pull out the power lead by the
plug. Do not pull on the power
lead itself.
Place the TV on a secure stable
stand. Do not allow children to
climb on to it. Do not place the TV
on its side or face up.
Unplug the power lead before
moving the TV. Avoid uneven
surfaces, quick steps or excessive
force. If the set has been dropped or
damaged, have it checked
immediately by qualified service
personnel.
Take care not to place heavy
objects on the power lead as this
could result in damage.
We recommend you wind any
excess lead around the holders
provided on the rear of the TV.
Do not cover the ventilation
openings of the TV with items
such as curtains or newspapers
etc.
Additional Safety Information
• After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,
pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors
or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.
• To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed
down from the ceiling.
• Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a
programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.
• Avoid touching the screen, and take care not to scratch the surface with hard objects.
4
Safety Information
01GB.fm Page 5 Monday, June 4, 2001 3:47 PM
Table of Content
Table of Contents
Keys to read this Instruction Manual ............................................................................................3
For your Safety..................................................................................................................................4
Getting Started
Overview
Checking the Accessories Supplied...................................................................................6
Overview of TV Buttons......................................................................................................6
Overview of Remote Control Buttons...............................................................................7
Installation
Inserting Batteries into the Remote Control .....................................................................8
Connecting the Aerial and VCR.........................................................................................8
Switching on the projection TV..........................................................................................8
First Time Operation
Selecting Language...............................................................................................................9
Automatically Tuning the TV using the Remote Control ............................................10
Changing the Programme Order of the TV channel.....................................................11
Adjusting colour Registration (Convergence) ...............................................................12
On Screen display Menus Guide .....................................................................................13
Advanced Operation
Advanced Presetting
Automatically Tuning the TV ..........................................................................................14
Manually Tuning the TV...................................................................................................15
Using the “Further Programme Preset” function..........................................................16
Locking Programmes.........................................................................................................17
Skipping Programme positions........................................................................................18
Labelling a channel ............................................................................................................19
Advanced TV Operation
Adjusting the Picture .........................................................................................................20
Changing the screen mode ...............................................................................................21
Adjusting the Sound ..........................................................................................................22
Using the Sleep Timer........................................................................................................24
Teletext
Viewing Teletext.................................................................................................................25
Optional Connections
Connecting Optional Equipment .....................................................................................26
Using Optional Equipment...............................................................................................27
Smartlink .............................................................................................................................28
Remote Control of other Sony Equipment .....................................................................28
Selecting the output source for the Euro AV connectors .............................................29
Using the “AV Label Preset” function ............................................................................30
Additional Information
Optimum Viewing Area....................................................................................................31
Specifications ......................................................................................................................32
Troubleshooting .................................................................................................................33
Table of Contents
5
GB
01GB.fm Page 6 Monday, June 4, 2001 3:47 PM
Getting Started - Overview
Checking the Accessories Supplied
VIDEO
TV
Checking the Accessories Supplied
1
2
3
4
5
6
7
8
9
0
PROGR
Two batteries (R6 type)
MENU
RM 892
S
One Remote Control
(RM-892)
Overview of Projection TV Buttons
Selecting
input
source
Push up the flap on the
front of the projection TV
to reveal the front panel.
Headphone
S Video
jack
Input
jack
6
Video
Input
jack
Getting Started - Push up
Audio
Input
jacks
Auto
Start up
button
Auto
Convergence
button
Volume
control
buttons
Programme
up or down
buttons
(selects TV
channels)
Standby
indicator
On/Off
Switch
01GB.fm Page 7 Monday, June 4, 2001 3:47 PM
Getting Started - Overview
Overview
of Remote
Control
Buttons
Checking the
Accessories
Supplied
Displaying the time
VIDEO
This button does not work on this set.
TV
Press to switch the time on or off
(available only when teletext is
broadcast).
VCR operation
VTR 1 2 3 4 DVD
For more details, please refer to the
section "Remote Control of other
Sony Equipment".
CH
Muting the Sound
Press to mute TV sound.
Press again to restore the sound.
VIDEO
VCR on/off
Press to switch your VCR on or off.
TV
Selecting TV mode
Press to switch off Teletext or video input.
Selecting Teletext
Press to switch on Teletext.
These buttons do not work on this set.
Selecting channels
Press to select channels.
For double-digit programme numbers, e.g.
23, press -/-- first, then the buttons 2 and 3.
If you enter an incorrect first digit, this
should be corrected by entering another digit
(0-9) and then selecting -/-- button again to
enter the programme number of your choice.
1
2
3
4
5
6
7
8
9
PROGR
MENU
RM 892
S
Selecting Input source
Press repeatedly until the desired input
symbol of the source appears on the screen.
Selecting Screen format
Press repeteadly to change the format of
the screen (for more details, please refer to
the section “Changing the Screen format”).
K
Adjusting TV Volume
Press to adjust the volume of the TV.
Displaying On Screen Information
Press to display all on-screen indications.
Press again to cancel.
Back to the channel last watched
Press to watch the last channel selected
(watched for at least 5 seconds).
0
Selecting Sound mode
Press repeatedly to change the sound mode.
Selecting Picture mode
Press repeatedly to change the picture mode.
To Temporarily Switch Off projection
TV
Press to temporarily switch off TV (the
standby indicator
on the set lights up in
red). Press again to switch on TV from
standby mode.
To save energy we recommend switching off
completely when TV is not in use.
After 15-30 minutes without a signal
and without any button being pressed,
the set switches automatically into
standby mode.
This button only works in Teletext mode.
associated to this button does not
Function
work with this set.
Joystick for menu selection
4 Scroll Up
$ Scroll Down
Z Previous menu or selection
z Next menu or selection
OK Confirms your selection
Selecting channels
Press to select the next or previous channel.
Displaying the menu system
Press to display the menu on the screen.
Press again to remove the menu display
from the screen.
Besides TV functions, all coloured buttons as well as green
symbols are also used for Teletext operation. For more details,
please refer to the "Teletext" section of this instruction manual.
Getting Started - Overview
7
GB
01GB.fm Page 8 Monday, June 4, 2001 3:47 PM
Getting Started - Installation
Inserting Batteries into the Remote Control
Make sure you insert the batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Connecting the Aerial and VCR
VCR
or
OUT
IN
The Scart lead is optional.
If you use this optional connection it can improve picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV refer to the “Manually Tuning the TV” section
of this instruction manual, to the tune in the set to the ouput of you VCR. Also refer to your VCR instruction manual to
find out how to find the output channel of your VCR.
Switching on the projection TV
Push in the
On/Off
switch on the front of the
projection TV.
Connect the projection
TV plug to the
mains socket (220240V AC, 50Hz).
8
Getting Started - Installation
01GB.fm Page 9 Monday, June 4, 2001 3:47 PM
Getting Started - First Time Operation
Selecting Language
Use this function to change the language of the menu screens.
The first time that you switch on your projection TV, the Language menu appears automatically.
However, if you need to change the language menu afterwards, select the menu Language in the
proceed in the same way as described below.
1 Press the
on/off button on your projection TV set to switch on your
TV. The first time you press the on/off button on your TV set, the
language menu displays automatically on the TV screen.
(PRESET) menu and
LANGUAGE
English
Deutsch
Français
Español
Suomi
Nederlands
Português
Suenska
Dansk
Norsk
Italiano
Česki
Magyar
Eλλnvιkά
LANGUAGE
English
Deutsch
Français
Español
Suomi
Nederlands
Português
Suenska
Dansk
Norsk
Italiano
Česki
Magyar
Eλλnvιkά
Select Language:
Confirm: OK
Select Language:
Confirm: OK
GB
VIDEO
TV
2 Push the joystick on the remote control $ or 4 to select the language,
then press OK to confirm your selection.
If you select “French” language, the “Auto Tuning” process
will start searching TV channels on “L” TV system (for France)
and later B/G.
LANGUAGE
English
Deutsch
Français
Español
Suomi
Nederlands
Português
Suenska
Dansk
Norsk
Italiano
Česki
Magyar
Eλλnvιkά
Select Language:
Confirm: OK
1
2
3
4
5
6
7
8
9
0
The Auto Tuning menu appears on the projection TV screen in the selected
language.
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
PROGR
MENU
RM 892
S
Getting Started - First Time Operation
9
01GB.fm Page 10 Monday, June 4, 2001 3:47 PM
AUTO
PROG
1
Getting Started - First Time Operation
Automatically Tuning the TV using the Remote Control
You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV
automatically searches and stores all available channels for you.
After having selected the language, a new menu appears automatically on the projection TV screen asking you to
automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select
the menu Auto Programme in the
(PRESET) menu and proceed in the same way as described below or, please refer to the
section "Automatically Tuning the TV" of this instruction manual.
VIDEO
TV
1 Press the OK button on the remote control to select YES. A new menu
Do you want to start
automatic tuning?
appears automatically on the screen asking you to check that the
antenna is connected.
2 Confirm that the antenna is connected and then press the OK button.
Yes
No
Confirm: OK
Please confirm that
antenna is connected
Confirm: OK
1
2
3
4
5
6
7
8
9
0
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
This procedure could take some minutes. Please, be patient and
do not press any button, otherwise the automatic tuning will
not be completed.
AUTO PROGRAMME
PROG
1
SYS
B/G
CH
C 26
LABEL
-----
AUTO PROGRAMME
PROGRAMME SORTING
PROGR
When the automatic tuning is finished, the Programme Sorting menu
appears on the screen.
MENU
RM 892
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 28 BBC-W
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN -
Select PROG:
Exit: MENU
S
Notes: • To stop the automatic tuning, press the MENU button.
• If you stop the automatic tuning by pressing the MENU
button, the Programme Sorting menu does not appear
automatically on the screen.
10
Getting Started - First Time Operation
+ OK
01GB.fm Page 11 Monday, June 4, 2001 3:47 PM
Getting Started - First Time Operation
Changing the Programme Order of the TV channels
After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to
change the order in which the channels appear on the screen.
However, if you wish to rearrange the order of the channels afterwards, select the menu Programme Sorting in the
(PRESET) menu and proceed in the same way as described in the b) section of this chapter.
a) If you do not wish to change the channel order:
VIDEO
TV
1 Press the MENU button on the remote control to exit and return to the
normal TV screen.
PROGRAMME SORTING
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 28 BBC-W
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN -
Select PROG:
Exit: MENU
+ OK
When the automatic tuning is finished, the Programme Sorting menu
appears on the screen.
1
2
3
4
5
6
7
8
9
GB
b) If you wish to change the channel order:
PROGRAMME SORTING
0
1 Push the joystick on the remote control to $ or 4 to select the
programme number with the channel (TV Broadcast) you wish to
rearrange, then press OK.
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 28 BBC-W
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN -
Select PROG:
Exit: MENU
PROGR
+ OK
MENU
2
Push the joystick to $ or 4 to select the new programme number
position for your selected channel (TV Broadcast), then press OK.
RM 892
The selected channel now moves to its new programme position
and the other channels move accordingly.
S
PROGRAMME SORTING
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 BBC-W
Select Position:
Confirm: OK
3
Repeat steps 1 and 2 if you wish to change the order of the other
channels.
4
Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
Getting Started - First Time Operation
11
01GB.fm Page 12 Monday, June 4, 2001 3:47 PM
Getting Started - First Time Operation
Adjusting Colour Registration (Convergence)
Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the
images. In that case, proceed as follows:
Auto converge the Red, Green, and Blue
Lines
1 Push up the flap on the front of the projection TV to reveal the front
control panel.
2 Press
button on the projection TV.
The Auto Convergence function works for about 30 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
Notes:
The Auto Convergence function does not work:
• when no signal is input.
• when the input signal is weak.
• when the screen is exposed to spotlights or direct sunlight.
• when you watch the teletext broadcast.
If you wish a more accurate
convergence adjustment
VIDEO
TV
1 Press the MENU button on the remote control to display the menu on
the screen.
2 Push the joystick to $ to select the symbol
PICTURE CONTROL
Picture Mode
Contrast
Reset
Format
Personal
4:3
, then push to z to enter
to the PRESET menu.
3 Push the joystick to $ or 4 or 4 to select Convergence, then push to z.
1
2
3
4
5
6
7
8
9
4 Push the joystick to $ or 4 to select “the line” (vertical and horizontal
lines in red and blue) you want to adjust.
: red vertical line (left/right adjustment)
: red horizonta line (up/down adjustment)
: blue vertical line (left/right adjustment)
: blue horizontal line (up/down adjustment)
0
Then press the OK button.
5 Push the joystick repeatedly to $ , 4 , Z or z to converge the selected
line with the green line in the centre, then press OK to confirm.
PROGR
6 Repeat steps 4 and 5 to adjust the other lines, until all the lines have
overlapped to form a white cross.
MENU
7 Press the MENU button to exit and return to the normal TV screen.
RM 892
S
12
Your projection TV is ready for use.
Your projection TV is ready for use.
Getting Started - First Time Operation
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
01GB.fm Page 13 Monday, June 4, 2001 3:47 PM
Getting Started - First Time Operation
Adjusting Colour Registration (Convergence)
MENU
Press the MENU button on the remote control to display the menu on the screen.
PICTURE CONTROL
Picture Mode
Contrast
Reset
Format
PICTURE CONTROL
Personal
4:3
SOUND CONTROL
Sound Mode
Balance
Reset
Dolby Virtual
Dual Sound
Volume Offset
Volume
Dual Sound
Speaker
(For different adjustments, please refer to
the section "Adjusting the Picture")
Personal
4:3
(For different adjustments, please refer to
the section "Adjusting the Sound")
SOUND CONTROL
Personal
Off
Mono
0
Mono
Main
VIDEO CONNECTION
TV Screen
Output
Picture Mode
Contrast
Reset
Format
[TV - - - - - - -]
[AV1 - - - - - - -]
Sound Mode
Balance
Reset
Dolby Virtual
Dual Sound
Volume Offset
Volume
Dual Sound
Speaker
Personal
Off
Mono
0
Mono
Main
(For more details, please refer to the
section "Selecting the output source for the
Euro AV connectors")
VIDEO CONNECTION
TV Screen
Output
[TV - - - - - - -]
[AV1 - - - - - - -]
TV
AV1
TV
AV1
TIMER
Sleep Timer
TIMER
Off
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
Sleep Timer
(For more details, please refer to the
section "Using the Sleep Timer")
1:00
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
MANUAL PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 BBC-W
FURTHER PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
AFT
On
On
On
On
On
On
On
On
On
On
DECODER
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
PRESET
AV LABEL PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
INPUT
AV1
RGB
AV2
YC2
AV3
LABEL
---------------------
PROGRAMME SORTING
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
GB
(For more details, please refer to the
section "Automatically Tuning the TV
using the Remote Control")
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 28 BBC-W
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN -
PARENTAL LOCK
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 - - - - -
LANGUAGE
English
Deutsch
Français
Italiano
Nederlands
Polski
Česki
Magyar
Eλλnvιkά
(For more details, please refer to the
section "Manually Tuning the TV")
(For more details, please refer to the
section "Using the Further Programme
Preset function")
(For more details, please refer to the
section "Using the AV Label Preset
function")
(For more details, please refer to the
section "Changing the Programme
Order of the TV channels")
(For more details, please refer to the
section "Locking Programmes")
(For more details, please refer to the
section "Selecting Language")
(For more details, please refer to the
section "Adjusting Colour Registration
Convergence)"
Getting Started - First Time Operation
13
01GB.fm Page 14 Monday, June 4, 2001 3:47 PM
Advanced Operation - Advanced Presetting
Automatically Tuning the TV
Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the
instructions below, this projection TV also searches and stores automatically all available channels using just one button of
the projection TV set and one button of the remote control.
1 Push up the flap on the front of the projection TV to reveal the front
control panel.
2 Press and hold in the
button on the TV set for some seconds, until
a menu appears automatically on the screen asking you to check that
antenna is connected.
Please confirm that
antenna is connected
3 Confirm that the antenna is connected and then press the OK button
Please confirm that
antenna is connected
Confirm: OK
on the remote control.
VIDEO
Confirm: OK
TV
AUTO PROGRAMME
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
1
2
3
4
5
6
7
8
9
0
This procedure could take some minutes. Please, be patient and
do not press any button, otherwise the automatic tuning will not
be completed.
When the automatic tuning procedure is complete, the Programme
Sorting menu appears on the screen:
• If you do not wish to change the channel order, press the MENU
button on the remote control to exit and return to the normal TV
screen.
• If you wish to change the channel order, proceed in the same way as
described in the chapter "Changing the Programme Order of the TV
channels", section b).
PROGR
Note: To stop the automatic tuning, press the MENU button on the
remote control.
MENU
RM 892
S
14
Advanced Operation - Advanced Presetting
PROG
1
SYS
B/G
CH
C 26
LABEL
-----
AUTO PROGRAMME
01GB.fm Page 15 Monday, June 4, 2001 3:47 PM
Advanced Operation - Advanced Presetting
Manually Tuning the TV
Use this function to preset channels or a video input source one by one to the programme order of your choice.
1 Press the MENU button on the remote control to display the
VIDEO
TV
menu on the screen.
2 Push the joystick to $ to select the
Picture Mode
Contrast
Reset
Format
symbol, then push to z to
enter to the PRESET menu.
1
2
3
4
5
6
7
8
9
3 Push the joystick to $ or 4 to select Manual Programme Preset,
4:3
PRESET
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
0
4 Push the joystick to $ or 4 to select on which programme number
you want to preset a channel, then push to z.
PROGR
MENU
S
Personal
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
then push to z .
RM 892
PICTURE CONTROL
5 Push the joystick to $ or 4 to select the TV Broadcast system (B/G
for western european countries, D/K for eastern european
countries, L for France or I for United Kingdom) or a video input
source (AV1, AV2...), then push to z.
6 Push the joystick to $ or 4 to select the channel tuning, "C" for
terrestrial channels or "S" for cable channels, then push to z.
7 Press the number buttons to enter the channel number of the TV
Broadcast or push the joystick to 4 or $ to search for the next
available channel.
If you do not wish to store this channel, push the joystick to 4 or $
to continue searching for the desired channel.
GB
MANUAL PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 BBC-W
MANUAL PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 BBC-W
MANUAL PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 BBC-W
MANUAL PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
SYS CHAN LABEL
B/G C 40 MV-CH
B/G C 41 TVE-1
B/G C 31 TVE-2
B/G C 34 ANT-3
B/G C 27 TELE 5
B/G C 47 C PLUS
B/G C 44 - - - - B/G C 23 - - - - B/G C 35 CNN B/G C 28 BBC-W
8 If this is the desired channel you wish to store, press the OK button.
9 Repeat steps 4 to 8 if you wish to store more channels.
10 Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
Advanced Operation - Advanced Presetting
15
01GB.fm Page 16 Monday, June 4, 2001 3:47 PM
Advanced Operation - Advanced Presetting
Using the "Further Programme Preset" function
With this feature you can:
a) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a
better picture reception if the picture is distorted or
b) preset the AV3 output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In
this way a connected VCR records the unscrambled signal.
1
VIDEO
TV
2
1
2
3
4
5
6
7
8
9
3
0
4
PROGR
Press the MENU button on the remote control to display the menu on
the screen.
Push the joystick to $ to select the
to the PRESET menu.
symbol, then push to z to enter
Push the joystick to $ or 4 to select Further Programme Preset, then
push to z .
Push the joystick to $ or 4 to select the relevant programme number,
then push to z repeatedly to select:
MENU
a) AFT or
b) DECODER.
RM 892
PICTURE CONTROL
Picture Mode
Contrast
Reset
Format
Personal
4:3
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
FURTHER PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
AFT
On
On
On
On
On
On
On
On
On
On
DECODER
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
The selected item changes colour.
S
5
a) AFT
Push the joystick to $ or 4 to fine tune the channel frequency over a
range of -15 to +15, then press the OK button.
Repeat steps 4 and 5a) if you wish to fine tune other channels.
b) DECODER
Push the joystick to $ or 4 to select AV3 and press the OK.
FURTHER PROGRAMME PRESET
PROG
0
1
2
3
4
5
6
7
8
9
AFT
2
On
On
On
On
On
On
On
On
On
DECODER
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
FURTHER PROGRAMME PRESET
The picture from the decoder connected to the Euro AV :3 on
the back of the projection TV will appear on this programme
number.
Repeat steps 4 and 5b) to preset the AV3 output for other
programme positions.
6
Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
16
Advanced Operation - Advanced Presetting
PROG
0
1
2
3
4
5
6
7
8
9
AFT
On
On
On
On
On
On
On
On
On
On
DECODER
AV3
Off
Off
Off
Off
Off
Off
Off
Off
Off
01GB.fm Page 17 Monday, June 4, 2001 3:47 PM
Advanced Operation - Advanced Presetting
Locking Programmes
This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to
prevent children from watching programmes you consider unsuitable.
1
VIDEO
TV
2
1
2
3
4
5
6
7
8
9
3
Press the MENU button on the remote control to display the menu on
the screen.
Push the joystick to $ to select the
to the PRESET menu.
symbol, then push to z to enter
PICTURE CONTROL
Picture Mode
Contrast
Reset
Format
Personal
4:3