HP SB360
Digital Camera
Quick Start Guide
Getting Started
Parts of the Camera
1. Shutter button
2. Flash
3. Stabilizer
4. LED indicator
5. Power button
6. Self-timer LED / AF Assist Lamp
7. Microphone
8. Zoom Lens
9. Zoom buttons
10. Strapring
11. Function / Delete button
12. Menu Button
13. SET button / 4-way navigation
control
14. Playback button
15. LCD screen
16. Battery / SD card compartment
17. USB / TV Out
18. Tripod screw hole
19. Speaker
1
Setting the Display Language / Date & Time
When using the camera for the first time after purchasing, be sure to choose a
language and set the date & time before using the camera.
Setting the Display Language
1
Turn the power on, and set the
camera to the Setup Menu.
2
Language].
Select [
Press
or
to select
[LANGUAGE] then press SET button
to launch the submenu.
3
Select a language.
Press
or
to select a language and press SET button to apply
the setting.
4
Press the MENU button to close the menu.
2
Setting the Date & Time
1
Turn the power on, and set the
camera to the Setup Menu.
2
Select [ Date & Time].
Press
or
to select [Date &
Time] then press SET button to
launch the submenu.
3
Set date and time.
Press
or
to change the value of the cursor located. Press
or
button to move the cursor between settings.
4
Apply the setting.
After adjusting the settings, press the OK or the MENU button to apply the
setting.
Caution
Once the date, time and language have been set, changing the batteries or removing
the SD card will NOT reset these settings. However, if the batteries are removed for
longer than 48 hours, the Date and Time will need to be re-set.
3
Using the Menus
When the menu is displayed, use the 4-way navigation control and the SET
button to move through menu selections and apply your desired settings.
To close the menu anytime, press the menu button again
Using the Shooting Menu
1
Turn the power on, and set the
camera to Shooting mode.
2
Press
Menu.
3
4
5
6
to launch the Shooting
Use the
or
keys to move
through the menu selections.
To select an item, press
.
Change the submenu settings using the 4-way navigation control.
Press the SET button to save and apply settings.
4
Using the Setup Menu
You can access the Setup menu whether you are in Shooting or Playback mode. The
Setup menu allows you to configure general camera settings.
1
2
Press
to launch the
Record/ Playback Menu.
Use the
or
the menu tab to
menu.
3
4
5
6
Use the
or
keys to change
Setup
keys to move through the menu selections.
To select an item, press
.
Change the submenu settings using the 4-way navigation control.
Press the SET button to save and apply settings.
5
Using the Function Menu
The Function Menu is used to adjust capture settings in Shooting Mode. It contains My Mode,
Resolution, Quality, EV Compensation, White Balance, ISO, Metering, and Color Mode.
Press the FUNC button of your camera to launch the Function Menu.
Press the FUNC button again to close the menu.
The Menu bar displays the current
status of your camera settings. Only
the available functions for the settings
are shown as icon on the menu bar.
The available options for each item
on the menu bar are shown in the
Menu options.
or
Use the
to move through
the menu selections then press the
SET button to save and apply
changes
My Mode
The My Mode function displays the 6 most recent modes used in order. When you move
through the different modes in the menu options, the items on the menu bar changes
synchronously to the corresponding available settings.
6
P/N: 7525C00043A
Download PDF

advertising