section y - Hubbell Wiring Device
SECTION Y
Table of Contents
30, 50, 100 & 200 Amp
Cable Sets and Devices
Product
New Marine Products
Ship-to-Shore Selection Guide
ELCI Interface Solutions
Ship-to-Shore Cable Sets and Devices
30A Twist-Lock®
50A Twist-Lock®
100A Pin and Sleeve
200A Pin and Sleeve
Internationally Rated
Pin and Sleeve Devices
Twist-Lock® Devices
Adapters
Intelligent Y Adapters
Adapter Selection Guide
Molded Straight and Y Adapters
Telephone and Cable TV Devices
30A 28V DC Rated
12V DC Rated Switches
www.hubbell-wiring.com
GFCIs, USB Chargers,
Receptacles and Switches
Marine Adapters
Page
Y-2
Y-4
Y-6
Y-9
Y-14
Y-19
Y-22
Y-24
Y-25
Y-26
Y-28
Y-29
Y-30
Y-32
Y-33
Product
Page
®
Y-34
15A Twist-Lock and Straight Blade Devices
®
Y-36
20A Twist-Lock and Straight Blade Devices
Testers, Surge Protection and USB Charger Receptacles Y-38
GFCI and Portable Ground Fault Circuit Interrupters
Y-39
Inside the Boat
Receptacles
Y-40
Switches and Weatherproof Switch Plates
Y-41
Wallplates
Y-42
Communication Frames and Connectors
Y-43
Boatyard Accessory Items
Non-Metallic While-In-Use Weatherproof Covers Y-44
Marine Grade Lift Covers
Y-45
Marine Grade Dockside Boxes and Covers
Y-46
Lighting and Lighting Fixtures
Y-47
Cord Connectors
Y-47
Electrical Standards
Codes and Specifications
Y-48
®
Wiring Device-Kellems
Y-1
Marine Products
New Marine Products
2015 UL GFCI Requirements
GFCI Standard 943 Effective June 29, 2015 . . . . . . . . . . . . . . . . . . . . . . . page 39
Why: Studies show the majority of installed GFCI devices are not being manually tested
on a monthly basis as required by UL.
UL Changes
• The GFCI product must automatically monitor ground fault circuit interrupting functionality
every (3) hours or less
• If the device can no longer provide GFCI protection it must deny power and provide
a visual and/or audible indication that it no longer can provide protection
• If the line conductor is incorrectly wired to the load terminal, power to the receptacle
will be denied. This includes initial installation and any subsequent reinstallations
What does this mean?
Distributors, Electricians and Contractors
can continue to sell and install the current
design without any restrictions before or
after the June 29th date.
GFCI Manufacturers must end
production of current design by June 28th.
New self test design will begin to show up
on warehouse shelves by mid June.
The Hubbell Story — External Changes
• No impact to installer or end user
• No change in wiring or method of installation
• Same physical size and interface
• Added power indicator (solid green)
• Added trip indicator (solid red)
• Added “end of life” indicator (flashing red)
Improved USB Duplex Receptacle . . . . . . . . . . . . . . . . . . . . . . page 38
Now, faster and more powerful than ever, Hubbell is pleased to announce the
USB Duplex Receptacle with 3.8 amps of USB charging capacity.
Hubbell’s 3.8 USB Charger leads the industry in providing more power to charge
more portable devices faster. When specifying the Hubbell product, engineers
and designers will now be able to assure their users the best in technology and
speed. It runs cooler, lasts longer and available in the same physical one gang
configuration.
The product is marked 3.8 amps. The face is changed compared to our 3.0
design, with a cleaner look, now without the molded in lines separating the
USB section from the plug insert area.
Y-2
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
New Marine Products
FD Boxes and Angled Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
Introducing a fully UL Listed surface mount box engineered with features that allow easy,
code compliant installation of all types of devices from 15A to 50A, including metallic
ground bonding bracket, threaded conduit hubs and external mounting supports. Together
with an industry first 55 degree angle adapter, the combination of devices is the only code
compliant 45 cu.in. solution for 50A 4 wire installations. The angle adapter can also be
installed separately for panel applications.
Marine Grade Dockside Boxes and Covers
30 cu. in. FD box made of high impact
thermoplastic material. Accepts
duplex and single receptacles
up to 50A Twist-Lock®.
Housing Design
• 55° angle adapter (15 cu. in.)
• External mounting feet, accepts
#8 screw
• Stainless steel mounting/grounding
bracket
Housing Design
• ¾" NPT and 1" NPT threaded hub options
• 30 cu. in. FD box made of high impact
thermoplastic material
• External mounting feet, accepts
#10 screw
• Stainless steel mounting/grounding bracket
Hubbell Twist-Lock® Circuit Tester . . . . . . . . . . . . . . . . . . . .page 38
Styled and sized like a standard Hubbell Twist-Lock® Plug. Simply plug it in
and the LED back panel immediately identifies if the connections are made
correctly and are in the correct position, ensuring the device is wired properly.
An easy to read card is provided with the tester, to help determine if the
connections are correct. This tester is compact and can easily clip onto
your tool belt. The Hubbell Circuit Tester is UL and C-UL Listed.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-3
Marine Products
Ship-to-Shore Selection Chart - Boatside
30A
125V AC
2 Pole
3 Wire
Pages Y-9 to Y-12
HBL303NM
HBL303SS
HBL503NM
HBL503SS
HBL63CM60
HBL504NM
HBL504SS
HBL63CM64
HBL60CM33
HBL60CM33W
HBL26CM13
50A
125V AC
2 Pole
3 Wire
Pages Y-13 to Y-15
HBL77CM15
HBL77CM15W
50A
125/250V AC
3 Pole
4 Wire
Pages Y-16 and Y-17
HBL77CM15
HBL77CM15W
100A
125/250V AC
3 Pole
4 Wire
Pages Y-18 to Y-20
M4100B12R
M4100C12R
M5100B9R
M5100B7R
M5100C9R
M5100C7R
100A
3ØY
4 Pole
5 Wire
Page Y-21
120/208V AC
277/480V AC
200A
600V AC/250V DC
50-400 Hertz
4 Pole
5 Wire
Pages Y-22 and Y-23
M5200BS1R
M5200CS1R
Portable
Telephone
Cable TV
Devices
Pages Y-30 and Y-31
Y-4
HBLPHTVSS
HBLPHTVNM
®
HBLTVSS
Wiring Device-Kellems
PH6624
PH7440
www.hubbell-wiring.com
Marine Products
Ship-to-Shore Selection Chart - Dockside
YC310250 - 280' (85.3m) Yellow cable only.
WC310280 - 280' (85.3m) White cable only.
HBL61CM08 & HBL61CM08LED
- 50' (15.2m)
HBL61CM05 & HBL61CM05LED
- 35' (10.7m)
HBL61CM03 & HBL61CM03LED
- 25' (7.6m)
HBL61CM08W & HBL61CM08WLED - 50' (15.2m)
HBL61CM03W & HBL61CM03WLED - 25' (7.6m)
HBL60CM31
HBL60CM31W
HBL26CM11
HBL26CM10
HBL74CM25WOA
HBL74CM25WOAW
HBL77CM16
HBL77CM16W
HBL63CM61
HBL63CM70
HBL77CM74WO
HBL77CM16
HBL77CM16W
HBL63CM65
HBL63CM69
HBL77CM74WO
YC306250 - 250' (76.2m) Yellow cable only.
HBL61CM53 & HBL61CM53LED
HBL61CM43 & HBL61CM43LED
- 50' (15.2m)
- 25' (7.6m)
YC406250 - 250' (76.2m) Yellow cable only.
HBL61CM52 & HBL61CM52LED
- 50' (15.2m)
HBL61CM42 & HBL61CM42LED
- 25' (7.6m)
HBL61CM52W & HBL61CM52WLED - 50' (15.2m)
HBL61CM42W & HBL61CM42WLED - 25' (7.6m)
CS1004
CS754
CS100IT4
CS754IT4
CW125IT4
CW100IT4
CW754
CS50EXT4
- 100' (30.4m) 4-Wire
- 75' (22.8m) 4-Wire
- 100' (30.4m) 3-Wire
- 75' (22.8m) 3-Wire
- 125' (38.0m) One-ended cable set for winches.
- 100' (30.4m) One-ended cable set for winches.
- 75' (22.8m) One-ended cable set for winches.
- 50' (15.2m) Extension cord.
M4100P12
M4100C12
M4100R12
M5100P9
M5100P7
M5100C9
M5100C7
M5100R9
M5100R7
CS100IT5 - 100' (30.4m) 4-Wire
CS75IT5 - 75' (22.8m) 4-Wire
CW125IT5 - 125' (38.0m) One-ended cable set for winches.
CW100IT5 - 100' (30.4m) One-ended cable set for winches.
CS50EXT5 - 50' (15.2m) Extension cord.
M5200PS1
M5200CS1
M5200RS1
PH6630 - 250' (76.2m) Yellow cable only.
PH6599 - 50' (15.2m)
PH6598 - 25' (7.6m)
PH6599W - 50' (15.2m)
PH6598W - 25' (7.6m)
75 Ohm TV Cable
TV99 - 50' (15.2m)
TV98 - 25' (7.6m)
TV99W - 50' (15.2m)
TV98W - 25' (7.6m)
PH7440
www.hubbell-wiring.com
PH6625
®
PH6596
TV97
Wiring Device-Kellems
PH6597TV
Y-5
Marine Products
Features and Benefits
ABYC Code Requirements
Hubbell Marine Electrical continues its tradition of innovation
by developing a simple, flexible method of adapting a variety of
ELCI Sensors and Breakers to our traditional Stainless Steel
and Non-Metallic Shore Power Inlet Housings.
Effective July 31, 2012, ABYC, E-11.11.1
requires that “An Equipment Leakage Circuit
Interrupter (ELCI) shall be installed with or in
addition to the main shore power disconnect circuit
breaker(s) or at the additional over current protection
as required by E-11.10.2.8.3, whichever is closer to
the shore power connection".
Note: A faulty electrical connection at the dock or on a boat
could result in stray electrical current in the water.
Such stray current in Electrical Shock Drowning (ESD).
Hubbell’s family of ELCI
adaptive Shore Power Inlet Kits
provide a simple, flexible,
low-cost solution.
Kits Contain:
• Hubbell Shore Power Inlet
• Matching Shore Power Inlet Housing(s)
• Mounting Adapter Plate(s) for use
with various ELCI Sensors and
ELCI Breakers (not provided)
• Stainless Steel Hardware
Y-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
ELCI Interface Solutions
Hubbell ELCI Adapter Kits for North Shore Safety, Ltd® PGFM Series (ELCI Marine)
Sensing Module and Sensata Technologies® ELCI Breakers
Description
Breaker
Sensor
Power Inlet
Catalog Number
30 Amp, 125 Volt Non-Metallic Inlet
(HBL303NM) and (2) Non-Metallic Inlet
Housings, Adapter Plates and Hardware.
HBL303NMELCI
30 Amp, 125 Volt Non-Metallic Inlet
(HBL303NM) and (1) Non-Metallic Inlet
Housing that adapts to North Shore Safety’s
Sensor only (no circuit breaker inlet housing),
Adapter Plate and Hardware.
HBL303NMELCIS
30 Amp, 125 Volt Stainless Steel Inlet
(HBL303SS) and (2) Stainless Steel Inlet
Housings, Adapter Plates and Hardware.
HBL303SSELCI
30 Amp, 125 Volt Stainless Steel Inlet
(HBL303SS) and (1) Stainless Steel Inlet
Housing that adapts to North Shore Safety’s
Sensor only (no circuit breaker inlet housing),
Adapter Plate and Hardware.
HBL303SSELCIS
50 Amp, 125/250 Volt Stainless Steel Inlet
(HBL504SS) and (2) Stainless Steel Inlet
Housings, Adapter Plates and Hardware.
HBL504SSELCI
50 Amp, 125/250 Volt Stainless Steel Inlet
(HBL504SS) and (2) Stainless Steel Inlet
Housing that adapts to a standard
overcurrent-type circuit breaker.
HBL504SSELCIH
Blank Non-Metallic Inlet Housing and
Hardware for mounting North Shore Safety
ELCI Sensor only.
HBLRRELCI
Note: North Shore Safety’s Sensor and Sensata Technologies Circuit Breakers (not provided) are separate devices each requiring their own blank shore power inlet interface.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-7
Marine Products
Cable sets only.
Features and Benefits
30 Amp Cable Sets
•
•
•
•
Bright, durable, LED (green) indicates “Power-ON”
High intensity LED is visible—even in bright sunlight
Totally molded design for superior waterproofing and durability
Exclusive copper crimp barrel terminations for tighter
connections and longer life
• Marine UL and cUL Listed
HBL61CM08
HBL61CM08LED
Note: Cable sets must be fully extended before using.
Y-8
Housing Design
• New improved ergonomic styling
• Line-up notches to indicate:
Locked - Unlocked
• Arrow indicating lock or unlock position
• Available in yellow or white colors
Interior Design
• Molded design totally encased in solid
PVC material, for superior waterproofing
and durability
• Locking ring assures proper alignment of
connector to inlet for complete contact
and waterproofing; prevents accidental
disengagement
Safety
• Bright green LED indicates
“Power-ON”
Interior Design
• Strain relief bull ring protects against
stress and strain on the conductors
caused by boat movement, crew traffic
and rough handling
• Exclusive copper crimp barrel
termination provides protection against
internal overheating as well as additional
strain relief
Cord Flexibility
• Molded flexneck adds life to cable set
by helping to prevent right-angle cable
damage and pullout
• Jute fillers inside jacket for maximum
cable flexibility; Hubbell cable coils
neater, lighter and lays flatter; particularly
in colder climates
Cable Set Options
• Available in 50, 35 and 25 foot lengths
• Available with or without LED
• Available in UV resistant yellow or white
• Marine UL and cUL Listed
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Cable sets only.
30A Ship-to-Shore Devices
30 Amp Cable Sets and Bulk Cable
Our 30A 125V cable set is packed with high performance details
from end to end that make a real difference. Completely factory prewired with molded-on devices. Designed to coil easily and lay flat.
IP55
W
G
SUITABILITY
(Boatside)
30A 125V
NEMA L5-30R
UL/CSA
30A 125V Cable Sets and Bulk Cable
Description
Catalog Number
Yellow 50 ft. (15.2m) vinyl jacketed shore power cable set. #10 AWG is factory pre-wired
with molded-on devices. Connector end has non-metallic threaded sealing ring which
makes inlet/connector interface watertight.
HBL61CM08
Same as HBL61CM08 except 35 ft. (10.7m) in length.
HBL61CM05
Same as HBL61CM08 except 25 ft. (7.6m) in length.
HBL61CM03
Same as HBL61CM08 except in white in color.
HBL61CM08W
Same as HBL61CM03 except in white in color.
HBL61CM03W
Note: See page Y-8 for features and benefits.
HBL61CM08
HBL61CM05
HBL61CM03
HBL61CM08W
HBL61CM03W
30A Cable Sets with LED “Power-ON” Indicator
Description
Catalog Number
Yellow 50 ft. (15.2m) vinyl jacketed shore power cable set. #10 AWG is factory pre-wired
with molded-on devices. Connector end has non-metallic threaded sealing ring which
makes inlet/connector interface watertight.
HBL61CM08LED
Same as HBL61CM08LED except 35 ft. (10.7m) in length.
HBL61CM05LED
Same as HBL61CM08LED except 25 ft. (7.6m) in length.
HBL61CM03LED
Same as HBL61CM08LED except in white in color.
HBL61CM08WLED
Same as HBL61CM05LED except in white in color.
HBL61CM05WLED
Same as HBL61CM03LED except in white in color.
HBL61CM03WLED
Note: See page Y-8 for features and benefits.
HBL61CM08LED
HBL61CM05LED
HBL61CM03LED
Accessories
Description
Catalog Number
Yellow 250 ft. (76.2m) three conductor, #10 AWG type STW, PVC jacketed portable
cord with jute fillers for added flexibility. Ideal for making cable sets, extension cord,
and adapters that will not mark boat’s deck. 250 ft. (76.2m) lengths only.
YC310250
White 280 ft. (85.3m) three conductor, #10 AWG type STW, PVC jacketed portable
cord with jute fillers for added flexibility. Ideal for making cable sets, extension cord,
and adapters that will not mark boat’s deck. 280 ft. (85.3m) lengths only.
WC310280
Replacement non-metallic sealing ring for 30A cable sets and boots.
RPL30P*
YC310250
Note: *Not UL Listed.
RPL30P
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-9
Marine Products
30A Ship-to-Shore Devices
30 Amp 125 Volt Shore Power Inlets and Outlet
Traditional, stainless steel shore power inlet has easy-to-wire
terminations. Interior is transparent for quick and easy visual
inspection. Interior is shielded from the elements by a gasketed,
self-closing cover, watertight when cover is screwed in place.
Mounting holes are 2.38 in. (60.3) on centers. Mounting screws
and gasket included. Protective rear enclosure/strain relief
also included.
• Self-closing cover assures the interior is shielded from the
elements when the inlet is not in use
• Neoprene gasket on underside of cover. For sealing when
the cover is closed
• Mirror stainless steel finish for superior appearance
Housing Design
• Base and cover are #316 type
stainless steel for strength and
corrosion resistance
• Threaded base for making a watertight
seal. When in use, it mates to the
threaded ring of the weatherproof cover
on the connector body; when not in
use, it mates to the threaded cover
HBL303SS
Interior Design
• Contact blades are nickel plated
brass for corrosion resistance
• Mounting holes are 2³⁄₈ in. (60.3)
on center
• Polycarbonate interior has superior
heat resistance
Terminations
• Easy-to-wire interior is transparent
for quick, visual inspection of
terminations
• #SR3050 protective rear enclosure
cap attaches to contact carrier
with 3 screws
W
HBL303NM
G
30A 125V
NEMA L5-30R
UL/CSA
30A 125V Twist-Lock® Devices
HBLCBISS
HBLCBINM
HBL303SSO
Y-10
Description
Catalog Number
Stylized UV resistant non-metallic shore power inlet has white Centrex® cover which makes
unit weatherproof when completely closed. Interior has easy-to-wire terminations and is
transparent for quick and easy visual inspection. Mounting holes are 2.38 in. (60.3) on
centers and match existing mounting patterns. Mounting screws and gasket included.
Protective rear enclosure/strain relief also included. IP55 SUITABILITY.
Traditional, stainless steel shore power inlet has easy-to-wire terminations. Interior is
transparent for quick and easy visual inspection. Interior is shielded from the elements by a
gasketed, self-closing cover, watertight when cover is screwed in place. Mounting holes are
2.38 in. (60.3) on centers. Mounting screws and gasket included. Protective rear enclosure/
strain relief also included. IP56 SUITABILITY.
Traditional stainless steel inlet housing; blank for attaching a circuit breaker (not included).
Mounting hardware for Carling series breakers included. IP56 SUITABILITY.
Stylized non-metallic inlet housing; blank for attaching a circuit breaker (not included).
Mounting hardware for Carling series breakers included. IP55 SUITABILITY.
Protective rear cover. Fits all 30A shore power inlets. Secures to back of inlets with
three screws which are provided.
Replacement interior for HBL303SS and 60CM61 shore power inlets.
Traditional stainless steel power outlet has gasketed, self-closing cover, watertight
when cover is screwed in place. Mounting holes are 2.38 in. (60.3) on centers.
Mounting screws and gasket included. IP56 SUITABILITY.
Nickel plated brass adapter plate for mounting 30A traditional style shore power inlets
and outlets to FS/FD box.
HBL303NM
HBL303SS
HBLCBISS
HBLCBINM
SR3050*
HBL303INT
HBL303SSO
HBL60CM75
Note: *Not UL Listed or CSA Certified.
Centrex® is a registered trademark of LANXESS Corporation.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Plugs, receptacles
and connectors only.
30A Ship-to-Shore Devices
W
G
30A 125V
NEMA L5-30R
UL/CSA
30A 125V Twist-Lock® Devices
Description
Catalog Number
Yellow Insulgrip® plug has rugged nylon housing and cord grip with range of .36–.93 in.
(9–24) that utilizes a unique offset jaws arrangement to provide secure strain relief.
IP20 SUITABILITY.
HBL26CM11
Yellow Insulgrip connector body has rugged nylon housing and cord grip with range
of .36–.93 in. (9–24) that utilizes a unique offset jaws arrangement to provide secure
strain relief.
HBL26CM13
Yellow single receptacle has Rynite® body and abuse resistant nylon face.
IP20 SUITABILITY.
HBL26CM10
HBL26CM11
Boots and Weatherproof Plates
Description
Catalog Number
Yellow Seal-Tite® cover for weatherproofing HBL26CM11 plugs.
IP44 SUITABILITY. Note: Fits Insulgrip devices only.
HBL60CM31+
White Seal-Tite cover for weatherproofing HBL26CM11 plugs.
IP44 SUITABILITY. Note: Fits Insulgrip devices only.
HBL60CM31W+
Yellow Seal-Tite cover for weatherproofing HBL26CM13 connector bodies when used
with shore power inlets. Threaded sealing ring makes connection watertight. Also for
weatherproofing HBL26CM11 plug when used with HBL303SSO power outlet.
IP56 SUITABILITY. Note: Fits Insulgrip devices only.
HBL60CM33+
White Seal-Tite cover for weatherproofing HBL26CM13 connector body when used
with shore power inlets. Threaded sealing ring makes connection watertight. Also for
weatherproofing HBL26CM11 plug when used with HBL303SSO power outlet.
IP56 SUITABILITY. Note: Fits Insulgrip devices only.
HBL60CM33W+
Yellow Seal-Tite cover for weatherproofing HBL26CM13 connector bodies when used
on extension cords or adapters. IP44 SUITABILITY. Note: Fits Insulgrip devices only.
HBL60CM32+
Yellow polycarbonate spring-loaded lift cover for weather-proofing old style 26CM10
receptacle. Meets the most stringent requirements of UL’s three listing categories for
weatherproof plates. Stainless steel screws and neoprene gasket included for mounting
to FS/FD type weatherproof boxes. IP44 SUITABILITY.
HBL74CM24WO**
HBL26CM13
HBL26CM10
Same as HBL74CM24WO except gray in color. IP44 SUITABILITY.
HBL7424WO**
Yellow polycarbonate spring-loaded lift cover for weather-proofing HBL26CM10 receptacle.
Meets the most stringent requirements of UL’s three listing categories for weatherproof plates.
Stainless steel screws and neoprene gasket included for mounting to FS/FD type
weatherproof boxes. IP44 SUITABILITY.
HBL74CM25WOA**
Same as HBL74CM25WOA except white in color. IP44 SUITABILITY.
HBL74CM25WOAW
Same as HBL74CM25WOA except gray in color. IP44 SUITABILITY.
HBL7425WOA**
Stainless steel wall plate for old 26CM10.
SS725
Stainless steel wall plate for new HBL26CM10.
SS720
HBL60CM31
Note: +Boots are not UL Listed or CSA Certified.
**See page Y-45 for aditional weatherproof plates.
HBL60CM33
HBL74CM25WOA
Rynite®
HBL74CM25WOAW
SS725
HBL60CM32
is a registered trademark of E. I. DuPont.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-11
Marine Products
Plugs and
connectors only.
30A Ship-to-Shore Devices
30 Amp Valise® Devices
A unique system of special locking lugs interlock the blade holder
and sides as the plug is closed. These load bearing lugs provide
strength and security and keep the Valise intact.
HBL26CM11V
Housing Design
• Nylon body
• Wiring time is reduced. Large easy
to wire clamp type terminals eliminate
the need to wrap conductors around
a screw
Interior Design
• Exclusive nylon webs are provided to
make wiring quick & easy by joining
the three sections together during
assembly
• Powerful cord grips resist conductor
slip and strain on wiring terminalS
• Nickel plated brass contacts for
corrosion resistance
Terminations
• Terminals provide a superior
electrical connection by "bundling"
the conductors when the clamps
are tightened
• Two captive stainless steel assembly
screws
HBL26CM11V
W
G
HBL26CM11VB
HBL26CM13V
30A 125V
NEMA L5-30R
UL/CSA
30A 125V Twist-Lock® Devices
Description
Catalog Number
Yellow Valise® plug has one-piece nylon housing and assembles easily with two screws.
Built-in cord grip has range of .59–.93 in. (15.0–23.6). IP20 SUITABILITY.
HBL26CM11V
Black Valise plug for use on bass boats with trolling motor. One-piece nylon housing
assembles easily with two screws. Built-in cord grip has a range of .59–.93 in. (15.0–23.6).
IP20 SUITABILITY.
HBL26CM11VB
Yellow Valise connector body has a one-piece nylon housing and assembles easily with
two screws. Built-in cord grip has range of .59–.93 in. (15.0–23.6). IP20 SUITABILITY.
HBL26CM13V
Boots and Replacement Parts
Description
Catalog Number
Seal-Tite®
HBL60CM31V
HBL60CM33V
Y-12
Yellow
cover for weatherproofing HBL26CM11V plugs. IP44 SUITABILITY.
Note: Fits Valise devices only.
HBL60CM31V**
Yellow Seal-Tite cover for HBL26CM13V connector body when used with shore power
inlets. Threaded sealing ring makes connection watertight. IP56 SUITABILITY.
Note: Fits Valise devices only.
HBL60CM33V**
Yellow Seal-Tite cover for weatherproofing HBL26CM13V connector bodies when used
on extension cords or adapters. IP44 SUITABILITY. Note: Fits Valise devices only.
HBL60CM32V**
Replacement non-metallic sealing ring for 30A cable sets and boots. Not UL listed.
RPL30P*
Note: **Not UL Listed or CSA Certified.
*Not UL Listed.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Cable sets only.
Features and Benefits
50 Amp Cable Sets
• Two bright and durable LEDs. GREEN indicates “Power-ON” and
RED indicates “Incorrect Wiring” at the power source
• High intensity LEDs are visible—even in bright sunlight
• Totally molded design for superior waterproofing and durability
• Exclusive copper crimp barrel terminations for tighter
connections and longer life
• Marine UL and cUL Listed
HBL61CM52
Note: Cable sets must be fully extended before using.
HBL61CM52LED
Housing Design
• New improved ergonomic styling
• Line-up notches to indicate:
Locked - Unlocked
• Stainless steel threaded sealing ring to
provide a watertight seal when mated
with the shore power inlet
• Nickel plated brass shell for positive
alignment of keying and corrosionresistance
Interior Design
• Thermoset contact carrier is arcing and
heat resistant
• Nickel plated brass contact blades
Safety
• Arrow with ground symbol allows
lining up with ground of receptacle
• Bright green LED indicates “Power-ON”;
Bright red LED indicates “Incorrect
Wiring” at the power source
Superior Termination
• Bull ring for strain relief on the terminals
• Exclusive copper crimp barrel termination
provides protection against internal
overheating and burnout compared to
brass crimps
Cord Flexibility
• Molded-in flex feature controls the angle
of cord entry and keeps water out
• Jute fillers inside jacket for maximum
cable flexibility; Hubbell cable coils
neater, lighter and lays flatter
Cable Set Options
• Available in 50 and 25 foot lengths
• Available in yellow or white
• Cords for winch systems available
upon request
• Marine UL and cUL Listed
www.hubbell-wiring.com
for corrosion-resistance
®
Wiring Device-Kellems
Y-13
Marine Products
50A Ship-to-Shore Devices
Inlets and
connectors only.
50 Amp 125 Volt Traditional Stainless Steel Inlets
Traditional stainless steel shore power inlet has gasketed, self-closing
cover so interior is shielded from the elements when not in use.
Watertight when cover is securely fastened. Mounting holes are
2.38 in. (60.3) on centers and rear portion has 2.17 in. (55.1)
diameter. Mounting screws and gasket included.
• Self-closing cover is friction tight to remain open while engaging
cable set and shields the interior from the elements when the
inlet is not in use
• Neoprene gasket on underside of cover, for sealing when
the cover is closed
HBL503SS
Housing Design
• Base and cover end threads are
#316 type stainless steel for strength
and corrosion resistance
• Threaded base for making a watertight
seal. When in use, it mates to the
threaded ring of the weatherproof cover
on the connector body; when not in
use, it mates to the threaded cover
Interior Design
• Contact blades are nickel plated
brass for corrosion resistance
• Pressure screw terminals for secure
terminations clearly marked for easy
identification
• Thermoset contact carrier is arcing
and heat resistant
Terminations
• Three screws "lock-in" the interior
once it is in place
• Rear enclosure is nickel plated for
corrosion resistance
W
G
50A 125V Twist-Lock® Devices
HBL503NM
HBL63CM60
50A 125V
Description
Catalog Number
Stylized non-metallic shore power inlet has UV resistant white Centrex® cover which makes
unit weatherproof when completely closed. Interior has easy to wire terminals. Mounting
holes are 2.38 in. (60.3) on centers and match existing mounting patterns. Mounting screws
and gasket included. IP55 SUITABILITY.
Traditional stainless steel shore power inlet has gasketed, self-closing cover so interior is
shielded from the elements when not in use. Watertight when cover is securely fastened.
Mounting holes are 2.38 in. (60.3) on centers and rear portion has 2.17 in. (55.1) diameter.
Mounting screws and gasket included. IP56 SUITABILITY.
Nickel plated brass connector body has heat resistant thermoset interior and combination
metal and rubber cord grip provides superior strain relief capability.
Cord grip range is .44–1.14 in. (11.1–29.0). IP20 SUITABILITY.
HBL503NM
HBL503SS
HBL63CM60
Boots and Replacement Parts
HBL77CM15
HBL77CM17
Y-14
Description
Catalog Number
Protective rear cover. Fits all inlets except HBL503SS. Secures to back of inlets with
three screws which are provided.
Replacement interior for HBL503SS and 63CM72 shore power inlets.
Yellow Seal-Tite® cover for connector bodies when used with 50A shore power inlets.
Threaded sealing ring makes connections watertight. IP56 SUITABILITY.
White Seal-Tite cover for connector bodies when used with 50A shore power inlets.
Threaded sealing ring makes connections watertight. IP56 SUITABILITY.
Nickel plated brass cord clamp assembly with clamp range of .44–1.14 in. (11.1–29.0)
provides strain relief for terminations on shore power inlets.
Yellow Seal-Tite cover for weatherproofing 50A connector bodies on extension cords or
adapters. IP56 SUITABILITY.
SR3050**
CR16277
HBL77CM15**
HBL77CM15W**
HBL77CM67
HBL77CM17**
Note: **Not UL Listed or CSA Certified.
Centrex® is a registered trademark of LANXESS Corporation.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Cable sets only.
50A Ship-to-Shore Devices
50 Amp 125 Volt Cable Sets and Bulk Cable
Our 50A 125V cable set is packed with high performance details from
end to end that make a real difference. Completely factory pre-wired
with molded-on devices. Designed to coil easily and lay flat.
IP56
SUITABILITY
W
(Boatside)
G
50A 125V Cable Sets and Twist-Lock® Devices
50A 125V
Description
Catalog Number
Yellow 50 ft. (15.2m) vinyl jacketed shore power cable set. #6 AWG type STOW is completely
factory pre-wired with molded-on devices. Connector end has threaded metallic sealing ring
to make inlet/connector interface watertight. IP54 SUITABILITY (BOATSIDE).
HBL61CM53
Same as HBL61CM53 except with two high intensity LEDs.
HBL61CM53LED
Same as HBL61CM53 except 25 ft. (7.6m) in length.
HBL61CM43
Same as HBL61CM43 except with two high intensity LEDs.
HBL61CM43LED
Three conductor, #6 AWG type STOW, yellow PVC jacketed portable cord with jute fillers
for added flexibility. Ideal for making cable sets, extension cords and adapters will not
mark boat’s deck. 250 ft. (75.2m) lengths only.
YC306250
Nickel plated brass plug has heat resistant thermoset interior and combination metal and
rubber cord grip, provides superior strain relief capability. Cord grip range is .44–1.14 in.
(11.1–29.0). IP20 SUITABILITY.
HBL63CM61*
Single receptacle has a heat-resistant thermoset base. IP20 SUITABILITY.
HBL63CM70*
HBL61CM53
HBL61CM43
HBL61CM53LED
HBL61CM43LED
Note: *UL Listed and CSA Certified.
See page Y-13 for features and benefits.
HBL63CM61
Boots and Weatherproof Plates
Description
Catalog Number
Yellow Seal-Tite® cover for weatherproofing 50A plugs. IP55 SUITABILITY.
HBL77CM16**
White Seal-Tite cover for weatherproofing 50A plugs. IP55 SUITABILITY.
HBL77CM16W**
Yellow Valox® lift cover for weatherproofing 50A receptacles. Meets requirements of the most
stringent of UL’s three listing categories for weatherproof plates. Stainless steel screws and a
neoprene gasket included. For mounting to FS/FD type weatherproof boxes. IP44 SUITABILITY.
HBL77CM74WO
Same as HBL77CM74WO except gray in color. IP44 SUITABILITY.
HBL7774WO
Stainless steel wall plate for 50A receptacle.
SS750
Note: **Not UL Listed or CSA Certified.
HBL63CM70
HBL77CM16
HBL77CM74WO
Valox®
HBL7774WO
SS750
HBL77CM16W
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-15
Marine Products
50A Ship-to-Shore Devices
Inlets and
connectors only.
50 Amp 125/250 Volt Traditional Stainless Steel Inlets
Traditional stainless steel shore power inlet has gasketed, selfclosing cover so interior is shielded from the elements when not in
use. Watertight when cover is securely fastened. Mounting holes
are 2.38 in. (60.3) on centers and rear portion has 2.17 in. (55.1)
diameter. Mounting screws and gasket included.
• Self-closing cover is friction tight to remain open while engaging
cable set and shields the interior from the elements when the
inlet is not in use
• Neoprene gasket on underside of cover. For sealing when
the cover is closed
HBL504SS
Housing Design
• Base and cover are #316 type
stainless steel for strength and
corrosion resistance
• Threaded base for making a watertight
seal. When in use, it mates to the
threaded ring of the weatherproof cover
on the connector body. When not in
use, it mates to the threaded cover
Interior Design
• Contact blades are nickel plated
brass for corrosion resistance
• Pressure screw terminals for secure
terminations clearly marked for easy
identification
• Thermoset contact carrier is arcing
and heat resistant
Terminations
• Three screws "lock-in" the interior
once it is in place
• Rear enclosure is nickel plated for
corrosion resistance
Y
X
W
HBL504NM
HBL63CM64
50A 125/250V
Twist-Lock®
G
50A
125/250V
UL/CSA
Devices
Description
Catalog Number
Stylized non-metallic shore power inlet has UV resistant white Centrex® cover which makes
unit weatherproof when completely closed. Interior is heat resistant thermoset material and
has box lug terminals. Mounting holes are 2.38 in. (60.3) on centers and match existing
mounting patterns. Mounting screws and gasket included. IP55 SUITABILITY.
Traditional stainless shore power inlet has gasketed, self-closing cover so that the interior
is shielded from the elements when not in use. It is watertight when the cover is securely
fastened. The mounting holes are 2.38 in. (60.3) on centers and the rear portion has a
2.17 in. (55.1) diameter. Mounting screws and gasket are included. IP56 SUITABILITY.
Nickel plated brass connector body has a heat resistant thermoset interior and combination
metal and rubber cord grip, which provides superior strain relief capability. Cord grip range is
.44–1.14 in. (11.1–29.0). IP20 SUITABILITY.
HBL504NM
HBL504SS
HBL63CM64
Boots and Weatherproof Plates
HBL77CM15
HBL77CM17
Y-16
Description
Catalog Number
Protective rear cover. Fits all inlets except HBL504SS. Secures to back of inlets with three
screws which are provided.
Replacement interior for 63CM74 and HBL504SS power inlets.
Yellow Seal-Tite® cover for connector bodies when used with 50A shore power inlets.
Threaded sealing ring makes connections watertight. IP56 SUITABILITY.
White Seal-Tite cover for connector bodies when used with 50A shore power inlets.
Threaded sealing ring makes connections watertight. IP56 SUITABILITY.
Yellow Seal-Tite cover for weatherproofing 50A connector bodies on extension cords
or adapters. IP55 SUITABILITY.
Nickel plated brass cord clamp assembly with clamp range of .44–1.14 in. (11.1–29.0)
provides strain relief for terminations on shore power inlets.
SR3050**
CR16279**
HBL77CM15**
HBL77CM15W**
HBL77CM17**
HBL77CM67
Note: **Not UL Listed or CSA Certified.
Centrex® is a registered trademark of LANXESS Corporation.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
50A Ship-to-Shore Devices
Cable sets only.
50 Amp 125/250 Volt AC Cable Sets and Bulk Cable
Our 50A 125/250V AC cable set is packed with high performance
details from end to end that make a real difference. Completely
factory pre-wired with molded-on devices. Designed to coil easily
and lay flat.
Y
X
W
G
50A
125/250V
UL/CSA
50A 125/250V Cable Sets and Twist-Lock® Devices
Description
Catalog Number
Yellow 50 ft. (15.2m) vinyl jacketed shore power cable set, #6 AWG type STOW is completely
factory pre-wired with molded-on devices. The connector end has a metallic threaded sealing
ring for making the inlet/connector interface watertight. IP56 SUITABILITY (BOATSIDE).
HBL61CM52
Same as HBL61CM52 except with two high intensity LEDs
HBL61CM52LED
Same as HBL61CM52 except white in color.
HBL61CM52W
Same as HBL61CM52LED except white in color.
HBL61CM52WLED
Yellow 25 ft. (15.2m) vinyl jacketed shore power cable set, #6 AWG type STOW is completely
factory pre-wired with molded-on devices. The connector end has a metallic threaded sealing
ring for making the inlet/connector interface watertight. IP56 SUITABILITY (BOATSIDE).
HBL61CM42
Same as HBL61CM52LED except 25 ft. (7.6m) in length.
HBL61CM42LED
Same as HBL61CM42 except white in color.
HBL61CM42W
Same as HBL61CM42LED except white in color.
HBL61CM42WLED
Four conductor, #6 AWG type STOW, yellow PVC jacketed portable cord with jute fillers for
added flexibility is ideal for making cable sets, extension cords and adapters that will not
mark the boats deck. Available in 250 ft. (76.2m) lengths only.
YC406250
Nickel plated brass plug has a heat resistant thermoset interior and combination metal
and rubber cord grip, which provides superior strain relief capability. Cord grip range is
.44–1.14 in. (11.1–29.0). IP20 SUITABILITY.
HBL63CM65*
Single receptacle has a heat resistant thermoset base. IP20 SUITABILITY.
HBL63CM69*
Note: *UL Listed and CSA Certified.
See page Y-13 for features and benefits.
HBL61CM52
HBL61CM52W
HBL61CM42
HBL61CM42W
HBL63CM65
Boots and Weatherproof Plates
Description
Catalog Number
Yellow Seal-Tite® cover for weatherproofing 50A plugs. IP55 SUITABILITY.
HBL77CM16**
White Seal-Tite® cover for weatherproofing 50A plugs. IP55 SUITABILITY.
HBL77CM16W**
Yellow Valox® lift cover for weatherproofing 50A receptacles. Meets requirements of the most
stringent of UL’s three listing categories for weatherproof plates. Stainless steel screws and a
neoprene gasket included. For mounting to FS/FD type weatherproof boxes. IP44 SUITABILITY.
HBL77CM74WO
Same as HBL77CM74WO except gray in color. IP44 SUITABILITY.
HBL7774WO
Stainless steel wall plate for 50A receptacle.
SS750
HBL63CM69
Note: **Not UL Listed or CSA Certified.
HBL77CM16
HBL77CM74WO
HBL7774WO
SS750
HBL77CM16W
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-17
Marine Products
Features and Benefits
100 Amp Pin and Sleeve Devices
• Hubbell Marine was the first to offer 100 amp marine grade
devices that are considered second to none
• Hubbell developed the standard for 100 amp Pin and Sleeve
devices with the National Electric Code and the American
Boat and Yacht Council
M4100R12
M4100P12
Housing Design
• Supertough nylon housing provides
increased safety and abuse resistance
• High visibility yellow, STOW cable,
105°C rated and UL listed
• The gasketed locking ring engages the
mating device and when rotated and
locked makes the interface between
the devices watertight
Housing Design
• Nylon housing provides increased safety
and resistance
• The gasketed, self-closing cover is keyed
to normally seat in a position that provides
a weatherproof seal; simply rotating the
cover and locking it makes it watertight
• The device is marked with its catalog
number and rating for easy identification
Interior Design
• High impact thermoset contact carrier
is arcing and heat resistant
• Two screw pressure terminals provide
reliable terminations
• Nickel plated solid brass pins provide
for long life and reliable electrical contact
in corrosive environments
• Special keying makes proper alignment
of mating devices quick and easy
Interior Design
• High impact thermoset contact carrier is
arcing and heat resistant
• The terminals are clearly identified with large
markings for easy recognition
• Nickel plated solid brass contacts provide
for long life and reliable electrical contact in
corrosive environments
• Special keying makes proper alignment of
mating devices quick and easy
Exterior Design
• Massive external cable grips protect
the wiring from conductor movement
which can cause strain on the terminals
• All screws are stainless steel for
corrosion resistance
• The device is marked with its catalog
number and rating for easy identification
Y-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Features and Benefits
100 Amp Cable Sets
• Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets
for your shore power requirements
• Cable sets manufactured in factory-controlled conditions
using specially compounded cable to accommodate a
full 100 amperes
CS75IT4
Note: Cable sets must be fully extended before using.
IP56
SUITABILITY
100A Pin and Sleeve Cable Sets
100A
125/250V AC
100A 3ØY
120/208V AC
Description
Catalog Number
Yellow 75 ft. (22.8m) corrosion-resistant shore power cable set, 105°C
rated, #2 AWG, (no neutral), STOW cable with plug and connector body
for use with boats with isolation transformer on board.
CS75IT4*
CS75IT5
Same as above except 100 ft. (30.4m) in length.
CS100IT4
CS100IT5
Yellow 75 ft. (22.8m) corrosion-resistant shore power cable set, 105°C
rated, #2 AWG, STOW cable.
CS754
Same as CS754/5 except 100 ft. (30.4m) in length.
CS1004
Yellow 50 ft. (15.2m) corrosion-resistant extension cord, 105°C rated,
#2 AWG, STOW cable. For mating with existing shore power cable set.
CS50EXT4
Yellow 75 ft. (22.8m) corrosion-resistant one-ended (male only) power
supply cable, 105°C rated, #2 AWG, STOW cable with 3 pole 4 wire
male plug only; for use with boats using a cable winch system.
CW754
Yellow 100 ft. (30.4m) corrosion-resistant one-ended (male only) power
supply cable, 105°C rated, #2 AWG, (no neutral) STOW cable with male
plug only; for use with boats with isolation transformer on board and a
cable winch system.
CW100IT4
CW100IT5
Same as CW100IT4/5 except 125 ft. (38.0m) in length.
CW125IT4
CW125IT5
Same as CW100IT4/5 except white in color.
CW100IT4W
—
—
CS50EXT5
—
—
Note: Periodic cleaning and lubrication (such as LPS-1® made by Holt Lloyd Corp.) of the pins and sleeves of these devices is
necessary to enjoy years of optimal use.
*Also available in white, consult factory.
www.hubbell-wiring.com
CS75IT4
CS100IT4
®
CS100IT4W
Wiring Device-Kellems
Y-19
Marine Products
100A Ship-to-Shore Devices
100A
125/250V AC
100A 125/250V Pin and Sleeve Devices
Description
M4100P12
M4100R12
M4100C12
Catalog Number
Zytel®
Yellow
super tough nylon watertight plug has gasketed locking ring to make
plug/receptacle interface watertight. Cord grip range is 1.06–1.94 in. (26.9–49.3).
IP56 SUITABILITY.
M4100P12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically
when not in use and is watertight when securely fastened. Mounting holes are 4.88 in.
(123.8) on centers. Mounting screws and gasket included. IP56 SUITABILITY.
M4100R12
Yellow Zytel® super tough nylon watertight connector body for mating plug to connector
interface on extension cords or adapters. Cord grip range is 1.06–1.94 in. (26.9–49.3).
Note: It cannot be mated to the shore power inlet. IP56 SUITABILITY.
M4100C12
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes
automatically when not in use and is watertight when securely fastened. Mounting
holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter.
Mounting screws and gasket included. IP56 SUITABILITY.
M4100B12R
Yellow Zytel® super tough nylon watertight connector body has gasketed locking ring
to make inlet/connector interface watertight. Cord grip range is 1.06–1.94 in. (26.9–49.3).
Note: This device mates with shore power inlet only. IP56 SUITABILITY.
M4100C12R
100A Back Boxes and Accessories
Description
Catalog Number
Back box for inlets and receptacles has 15° angle section which can be installed in any of
4 positions. Box is cast aluminum with corrosion-resistant gray alkyd-based enamel finish
and 1½ in. NPT hub which can be mounted for either top or bottom feed. IP56 SUITABILITY.
FW60100
15° angle cast aluminum back box has corrosion-resistant gray finish and top hub with
1½ in. NPT 100A receptacles can be mounted directly to it.
BB1001W
Same as BB1001W except threaded top hub is 2 in. NPT.
BB1002W
Valox®
M4100B12R
M4100C12R
15° angle non-metallic back box, made of high-grade engineered thermoplastic
to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 1½ in. NPT hub size
and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).
IP57 SUITABILITY.
BB100N
Closure Cap for 100A plugs and connector bodies that (do not have a cap attached)
have locking rings.
PC100
Replacement lift cover assembly; includes cover, arm and assembly tool.
CA100
Replacement locking ring and cord clamp.
CC100
Replacement locking ring only.
LR100
Note: Periodic cleaning and lubrication (such as LPS-1® made by Holt Lloyd Corp.) of the pins and sleeves of these devices is
necessary to enjoy years of optimal use.
Product Dimensions Inches (mm)
FW60100
BB1001W
BB1002W
Dimensions in Inches (mm)
Y-20
BB1001W, BB1002W
FW60100
Zytel® is a registered trademark of E.I. DuPont.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
100A 3ØY 120/208V and 3ØY 277/480V Devices
Description
Zytel®
100A 3ØY
277/480V AC
100A 3ØY
120/208V AC
Catalog Number
Yellow
super tough nylon watertight plug has gasketed locking ring
to make plug/receptacle interface watertight. Cord grip range is 1.06–1.94 in.
(26.9–49.3). IP56 SUITABILITY.
M5100P9
M5100P7
Gray nylon dockside receptacle has gasketed, spring-loaded cover.
Closes automatically when not in use and is watertight when securely
fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting
screws and gasket included. IP56 SUITABILITY.
M5100R9
M5100R7
Yellow Zytel® super tough nylon watertight connector body for making plug
to connector interface on extension cords or adapters. Cord grip range is
1.06–1.94 in. (26.9–49.3). Note: It cannot be mated to the shore power inlet.
IP56 SUITABILITY.
M5100C9
M5100C7
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes
automatically when not in use and is watertight when securely fastened.
Mounting holes are 4.88 in. (123.8) on centers and rear portion
has 3.94 in. (100.0) diameter. Mounting screws and gasket included.
IP56 SUITABILITY.
M5100B9R
M5100B7R
Yellow Zytel® super tough nylon watertight connector body has gasketed
locking ring to make inlet/connector interface watertight. Cord grip range
is 1.06–1.94 in. (26.9–49.3). Note: This device mates with shore power
inlet only. IP56 SUITABILITY.
M5100C9R
M5100C7R
M5100P9
M5100R9
M5100C9
100A Back Boxes and Accessories
Description
Catalog Number
Back box for inlets and receptacles has 15° angle section which can be installed in any of
4 positions. Box is cast aluminum with corrosion-resistant gray alkyd-based enamel finish
and 1½ in. NPT hub which can be mounted for either top or bottom feed. IP56 SUITABILITY.
FW60100
15° angle cast aluminum back box has corrosion-resistant gray finish and top hub with
1½ in. NPT 100A receptacles can be mounted directly to it.
BB1001W
Same as BB1001W except threaded top hub is 2 in. NPT.
BB1002W
Valox®
15° angle non-metallic back box, made of high-grade engineered thermoplastic
to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 1½ in. NPT hub size
and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).
IP57 SUITABILITY.
BB100N
Closure Cap for 100A plugs and connector bodies that (do not have a cap attached)
have locking rings.
PC100
Replacement lift cover assembly; includes cover, arm and assembly tool.
CA100
Replacement locking ring and cord clamp.
CC100
Replacement locking ring only.
LR100
M5100B9R
M5100C9R
Note: Periodic cleaning and lubrication (such as LPS-1® made by Holt Lloyd Corp.) of the pins and sleeves of these devices is
necessary to enjoy years of optimal use.
Product Dimensions Inches (mm)
BB100N
BB1001W, BB1002W
BB100N
Zytel® is a registered trademark of E.I. DuPont.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
PC100
Dimensions in Inches (mm)
Wiring Device-Kellems
Y-21
Marine Products
Features and Benefits
200 Amp Pin and Sleeve Devices
Hubbell was the first to offer a UL listed 100 amp Marine Ship-To-Shore
System… and now, we are the first to offer a UL listed 200 amp Marine
Ship-To-Shore System.
The only 200 amp rated Ship-to-Shore System - built specifically for
Mega-Yachts.
Hubbell 200 amp devices are listed to UL1682 and UL Classified for the
mating and operation of 200 amp devices. Mates with Cooper® CrouseHinds® Arktite® or Appleton® Powertite® (when installed in accordance
with instructions furnished with device).
Housing Design
• Pins and Sleeves are made of nickelplated Tellurium copper for superior
corrosion and heat resistance
• UL Listed and CSA Certified
Interior Design
• Interchangeable with other “UL1686
Series C1” Listed devices
• Terminal screws feature swivel/pressure
pads to secure and prevent
damage to conductors strands
Housing Design
• Housing is made of copper-free
aluminum with an electrostatically
applied epoxy/polyester finish
• Type 3, 4, 4X Rated per UL50 standard
for superior water resistance
Interior Design
• Interchangeable with other “UL1686
Series C1” Listed devices
• Terminal screws feature swivel/pressure
pads to secure and prevent
damage to conductors strands
Exterior Design
• Cable clamp captures cable at four
points, provides superior retention
• Accepts a cord range of #1 AWG –
250 MCM
Appleton® and Powertite® are registered trademarks of Appleton Electric Company.
Cooper Crouse-Hinds® and Arktite® are registered trademarks of Cooper Industries, Inc.
Y-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
NEMA 4X
200A Ship-to-Shore Devices
200A
600V AC/250V DC
200A 600V AC/250V DC, 50-400 Hertz Pin and Sleeve Devices
Description
Catalog Number
Gray metallic, watertight boatside power inlet with wingnut-secured lid for water tightness
when not in use.
M5200BS1R
Gray/yellow metallic, watertight boatside connector body with locking ring to make
inlet/connector body interface watertight. Cord grip range is #1 AWG-250 MCM
1.00-2.5 in. (25.4-6.35).
M5200CS1R
Gray/yellow metallic, watertight dockside plug with locking ring to make plug/receptacle
interface watertight. Cord grip range is #1 AWG-250 MCM 1.00-2.5 in. (25.4-6.35).
M5200PS1
Gray metallic, watertight dockside receptacle with wing nut-secured lid for water tightness
when not in use.
M5200RS1
Gray/yellow metallic, watertight dockside connector body with wing nut-secured lid for
water tightness when not in use. For making plug/connector body interface on extension
cords or adapters.
M5200CS1
M5200BS1R
M5200CS1R
200A Back Boxes
Description
Catalog Number
Gray metallic back box for inlets and receptacles has 45° angle section which can be
installed in any of 4 positions, 2 in. NPT hub.
MB2003W
Gray metallic back box – same as above but 2½ in. NPT hub.
MB2004W
Product Dimensions Inches (mm)
6.90"
(175.26)
8.01"
(203.48)
M5200PS1
1.76"
(44.78)
Ø 5.625"
(142.88)
7.39"
(187.71)
M5200BS1R
Ø 4.50"
(114.30)
Wire Range
#1 AWG-250 MCM
Copper Only
6.70"
(170.20)
11.13"
(282.70)
M5200RS1
Cable Diameter
1.0" (25.4) Min.
2.5" (63.5) Max.
8.17"
(207.5)
6.75"
(171.5)
Wire Range
#1 AWG-250 MCM
Copper Only
M5200CS1R, M5200PS1
6.90"
(169.90)
7.76"
(197.10)
.99"
(25.22)
10.82"
(274.8)
9.50"
(241.3)
Ø 5.625"
(142.88)
45 deg.
7.39"
(187.70)
M5200RS1
Wire Range
#1 AWG-250 MCM
Copper Only
7.39"
(187.70)
6.70"
(170.20)
13.65"
(346.70)
4X Ø .406 (10.32)
Cable
10.82" Diameter
1.0"
(25.4) Min.
(274.8)
2.5" (63.5) Max.
Wire Range
#1 AWG-250 MCM
Copper Only
M5200CS1
www.hubbell-wiring.com
M5200CS1
(4X) Ø .44 (11.1)
8.17"
(207.5)
6.75"
(171.5)
Ø 4.50"
(114.30)
(4X) 3/8-16 UNC
MB2003W
9.50"
(241.3)
45 deg.
MB2003W
(4X) Ø .44 (11.1)
(4X) 3/8-16 UNC
MB2003W
®
Dimensions in Inches (mm)
Wiring Device-Kellems
Y-23
Marine Products
UL Classified to IEC
60309-1 and 60309-2
Features and Benefits
Internationally Rated Conventional-Styled Devices
Hubbell offers the only CE certified electrical shore power systems truly dedicated
for boats destined for Europe and the International community. Hubbell’s offering
of international shore power inlets are available in traditional 316 stainless steel
and attractive white non-metallic types resembling our domestic offering in
style and appearance but are not interchangeable with the domestic shore
power system.
Utilizing standard NEMA (National Electrical Manufacturer’s Association)
configurations not typically used in the marine market, Hubbell can offer a
safe and non-interchangeable 16 amp 230 volt system and 32 amp 230 volt
system for use with 50 cycle systems. The system includes white power supply
cables (one-end, female only) in both the 16 amp and 32 amp categories.
Hubbell also offers a series of Internationally Rated Pin and Sleeve Devices,
available in 16A, 32A and 63A 240V, these devices are interchangeable
with other manufactures of UL1686 C1 devices.
Housing Design
• Base and cover are #316 type stainless
steel for strength and corrosion resistance
• Self-closing cover is friction tight to
remain open while engaing cable set
and shields the interior from the elements
when the inleet is not in use
Interior Design
• Contact blades are nickel plated
brass for corrosion resistance
• Watertight seal when in use, threaded
base mates to the threaded ring of
the watertight cover on the connector
body; when not in use, it mates to
the threaded cover
Housing Design
• White Centrex® cover and PBT base,
weatherproof when closed
• Easy to wire polycarbonate interior
is heat resistant and clear for visual
inspection (16 amp and 32 amp)
Terminations (63 Amp)
• Thermoset contact carrier is arcing
and heat resistant
• Three screws "lock-in" the interior
once it is in place
• Rear enclosure is nickel plated for
corrosion resistance
Internationally Rated Pin and Sleeve Devices,
16A, 32A or 63A, 240V, 2 Pole Plus Earth ( )
IP66
SUITABILITY
Description
HBL316R6W
HBL316B6W
HBL316C6W
16A 240V
32A 240V
63A 240V
Shore power inlet with mounting holes 3.13 in. (79.3)
HBL316B6W
on centers and 2.72 in. (69.1) diameter on rear portion.
HBL332B6W
HBL363B6W
Connector body with cord grip range of .36–.83 in.
(9.1-21.1).
HBL316C6W
HBL332C6W
HBL363C6W
Shore power receptacle with mounting holes 3.13 in.
(79.3) on centers and 2.72 in. (69.1) diameter on
rear portion.
HBL316R6W
HBL332R6W
HBL363R6W
Plug with cord grip range of .36–.83 in. (9.1-21.1).
HBL316P6W
HBL332P6W
HBL363P6W
Closure plug for HBL316B6W.
PC320*
PC3430*
PC60*
Back box for inlets and receptacles is cast aluminum
with corrosion-resistant alkyd-based enamel finish
and two ¾ in. NPT hubs.
BB201W
BB301W
BB601W
Feed-thru box for inlets and receptacles is cast
aluminum with corrosion-resistant alkyd-based
enamel finish and one ¾ in. NPT hubs.
FT202W
—
FW60100
Note: *Not CSA Certified.
HBL316P6W
Y-24
Centrex® is a registered trademark of LANXESS Corporation.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Internationally Rated Conventional-Styled Devices
Twist-Lock® Devices, Ship-To-Shore Power System
Description
16A 230V
32A 230V, 50 Cycle
Non-metallic, white, stylized, UV resistant shore power inlet. White Centrex®
cover makes the inlet weatherproof when closed. Mounting holes are
2.38 in. (60.3) on centers and match most existing mounting patterns.
Rear enclosure strain/relief cap is provided. IP55 SUITABILITY.
HBL316NM
HBL332NM
Traditional, stainless steel shore power inlet has easy-to-wire terminations.
Interior is transparent for quick and easy visual inspection. Interior is
shielded from the elements by a gasketed, self-closing cover, watertight
when cover is screwed in place. Mounting holes are 2.38 in. (60.3)
on centers. Mounting screws and gasket included. Protective rear
enclosure/strain relief also included. IP56 SUITABILITY.
HBL316SSX
HBL332SSX
25 ft. (7.6m) white, vinyl jacketed power supply cord with female
(boat side) end only; other end blunt cut. IP56 SUITABILITY.
HBL316CSW25
50 ft. (15.2m) white, vinyl jacketed power supply cord with female
(boat side) end only; other end blunt cut.
HBL316CSW
HBL332CSW
Yellow locking connector replacement end for HBL316CSW25 and
HBL316CSW. IP20 SUITABILITY.
HBL316CRCX
HBL332CRCX
White Seal-Tite® cover with threaded sealing ring for use with
HBL316CRC and HBL332CRC connector bodies. IP56 SUITABILITY.
HBL60CM33W
HBL60CM33W
White Seal-Tite® cover with threaded sealing ring for use with
HBL316CRC and HBL332CRC connector bodies. IP56 SUITABILITY.
HBL60CM33
HBL60CM33
HBL316NM
HBL332NM
—
HBL316SSX
HBL332SSX
HBL316CRCX
HBL332CRCX
HBL316CSW25
HBL316CSW
HBL332CSW
HBL60CM33
HBL60CM33W
G
L
63A
230V
63A 230V Ship-To-Shore Power Systems
Description
Catalog Number
Traditional, stainless steel shore power inlet, including higher-quality metal threads,
heat-resistant thermoset interior and box lug terminals. IP56 SUITABILITY.
HBL363SSX
Nickel plated brass plug with heat-resistant thermoset interior and box lug terminals
cord grip range is .44 – 1.14 in. (11.1 - 29.0). IP55 SUITABILITY.
HBL363CRP
Nickel plated brass connector body with heat-resistant thermoset interior and box
lug terminals. Cord grip range is .44 – 1.14 in. (11.1 - 29.0). IP55 SUITABILITY.
HBL363CRC
Single receptacle with heat-resistant thermoset base. IP20 SUITABILITY.
HBL363CRR
HBL363CRP
Seal-Tite®
cover for connector bodies when used with 63A shore power inlets.
Yellow
Stainless steel threaded sealing ring makes connections watertight. IP56 SUITABILITY.
HBL77CM15
Same as HBL77CM15 except white in color.
HBL77CM15W
Yellow Seal-Tite® cover for 63A plugs. IP55 SUITABILITY.
HBL77CM16
Same as HBL77CM16 except white in color.
HBL77CM16W
HBL77CM15
HBL77CM16W
Centrex® is a registered trademark of LANXESS Corporation.
www.hubbell-wiring.com
HBL363SSX
®
HBL363CRC
HBL363CRR
Wiring Device-Kellems
Y-25
Marine Products
Features and Benefits
Intelligent Y Adapters
YQ230 - Safely powers a 50A 125/250V AC boat from two
30A 125V AC receptacles at dockside.*
Problem: A boat owner with one electrical system on board docks
in a marina that can only provide a different electrical system.
Solution: Use of the Hubbell YQ series of Intelligent Adapters
can correct many electrical system mismatches.
Note: *The two 30 amp receptacles must be on separate
phases to function.
YQ230
Safety
• Safety indicator light, (when ON, safe
operation is indicated)
• 3 pole contactor breaks both hots and
neutrals to prevent possibility of “live”
plug when not engaged
Housing Design
• Rugged UV resistant high-impact
housing
• Environmentally sealed against
humidity, fog and rain
• Cord clamps prevent strain on
terminals
• Sealing grommets keep moisture out
Intelligent Y Adapters
Description
Catalog Number
Adapter that permits use of 50A 125/250V AC cable set. (HBL61CM52), with two 30A 125V AC receptacles, HBL26CM10.
YQ230
Adapter that permits use of 100A 125/250V AC cable set. (CS754, CS1004) with one or two 50A 125/250V AC receptacles, HBL63CM69.
YQ100PLUS
Note: The YQ230 Adapter will only work with two 30A receptacles that are on different phases.
The YQ100PLUS Adapter must be plugged into two 50A 125/250V AC receptacles that are on the same phase to achieve 100 amp, 125/250 volts power —or the
“A” leg 50A male can be plugged into a single 50A 125/250V AC receptacle to achieve 50 amp, 125/250 volts power.
Intelligent Y Adapters
YQ100PLUS - Safely powers a 100A 125/250V AC boat from two
50A 125/250V AC receptacles at dockside -or- from a single 50A
125/250V AC receptacle acting as a single adapter.
Internal Logic Senses That:
• Both plugs are fully engaged (i.e., one is not dangling loose while
the other is plugged in) -or- the “A” leg plug is engaged to access
a single 50A 125/250V receptacle
• The polarity of the receptacle on the dock is correct
(i.e., no mis-wiring of the hot and neutral wires)
• The two receptacles are from correct phases
CAUTION: This adapter must be connected to an onboard, center-tapped
isolation transformer or shore power converter. DO NO USE this adapter
if such a transformer or converter is not available.
YQ100PLUS
Housing Design
• Rugged, smaller, lighter-weight
enclosure
• Environmentally sealed against
humidity, fog and rain
• Sealing grommets keep moisture out
Y-26
®
Wiring Device-Kellems
Safety
• Indicator lights indicate correct polarity
and safe operation
• “A” leg for accessing a single 50A
125/250V receptacle
www.hubbell-wiring.com
Marine Products
Features and Benefits
Hubbell Molded Adapters
Hubbell Straight Adapters (pigtails) and “Y” Adapters are built to
the same standards as all Hubbell Shore Power Cords.
Filled with end-to-end features and weathertight when mated
with Hubbell shore cords without the need for extra collars, etc.
Hubbell Marine Adapters deliver the power you need.
• Available in a variety of configurations
• Now CSA Compliant
HBL64CM56
HBL61CM22
Interior Design
• Terminations utilize exclusive copper
crimp barrel terminations, holds over
300% more securely
• Bull ring for strain relief on the terminals
• Nickel plated brass contact blades
Housing Design
• Fully molded fittings (except 100A) for
superior waterproofing and durability
• Hubbell adapters are weatherproof
when mated with Hubbell cable sets
for corrosion-resistance
Safety
• Provides 15 amp convenience power
with GFCI protection
• Manual reset button
• High impact PVC housing, UV stabilized
• Sealed GFCI housing and keypad
• Large LED power “ON” light
www.hubbell-wiring.com
Cord Flexibility
• Molded-in flex feature controls the angle
of cord entry and keeps water out
• Jute fillers inside jacket for maximum
cable flexibility; Hubbell cable coils
neater, lighter and lays flatter
®
Wiring Device-Kellems
Y-27
Marine Products
Adapter Selection Guide
Boat/Cable Set Side
Connector Body (Female End)
15A 125V, 2P 3W Straight Blade
with GFCI protection
15A 125V
NEMA 5-15R
UL/CSA
Molded Straight Adapters
Power Center/Dock Side
Plug (Male End)
HBL105GF
30A 125V, 2P 3W Twist-Lock®
30A 125V, 2P 3W Twist-Lock
HBL61CM22
HBL61CM22W
30A 125V, 2P 3W Twist-Lock
HBL61CM25
20A 125V, 2P 3W Twist-Lock
50A 125V, 2P 3W Twist-Lock
HBL61CM54
15A 125V, 2P 3W Straight Blade
30A 125V, 2P 3W Twist-Lock
HBL61CM55
50A 125V, 2P 3W Twist-Lock
50A 125V, 2P 3W Twist-Lock
HBL61CM56
30A 125V, 2P 3W Twist-Lock
30A 125V, 2P 3W Twist-Lock
HBL61CM71
50A 125/250V, 3P 4W Twist-Lock
50A 125V, 2P 3W Twist-Lock
HBL61CM72
50A 125/250V, 3P 4W Twist-Lock
100A 125/250V, 3P 4W Pin and Sleeve
HBL61CM100
50A 125/250V, 3P 4W Twist-Lock
15A 125V, 2P 3W
Straight Blade (lock type)
Molded Y Adapters
(2) 30A 125V, 2P 3W Twist-Lock
HBL64CM54
50A 125/250V, 3P 4W Twist-Lock
(2) 50A 125V, 2P 3W Twist-Lock
HBL64CM55
50A 125/250V, 3P 4W Twist-Lock
(2) 30A 125V, 2P 3W Twist-Lock
HBL64CM56
30A 125V, 2P 3W Twist-Lock
(2) 30A 125V, 2P 3W Twist-Lock
HBL64CM57
50A 125V, 2P 3W Twist-Lock
One Piece Adapters
30A 125V, 2P 3W Twist-Lock
HBL31CM28
15A 125V, 2P 3W Straight Blade
15 or 20A 125V, 2P 3W Straight Blade
HBL31CM29
30A 125V, 2P 3W Twist-Lock
20A 125V, 2P 3W Twist-Lock
HBL21CM28
15A 125V, 2P 3W Straight Blade
15 or 20A 125V, 2P 3W Straight Blade
HBL21CM29
20A 125V, 2P 3W Twist-Lock
Note: See page Y-27 for features and benefits.
See page Y-29 for photographs and descriptions.
Y-28
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Molded Adapters
Molded Straight Adapters — Now CSA Compliant
Description
Catalog Number
Permits use of 20A 125V Twist-Lock® locking type plug with 15 or 20A 125V straight
blade receptacle. IP20 SUITABILITY.
HBL21CM28*
Permits use of 15A or 20A 125V straight blade plug with 20A 125V Twist-Lock locking
type receptacle. IP20 SUITABILITY.
HBL21CM29*
Permits use of 30A 125V Twist-Lock locking type plug with 15 or 20A 125V straight blade
receptacle. IP20 SUITABILITY.
HBL31CM28
Permits use of 15A or 20A 125V straight blade plug with 30A 125V Twist-Lock
locking type receptacle. IP20 SUITABILITY.
HBL31CM29
Permits use of 30A 125V cable set, HBL61CM08 with 15 or 20A 125V straight blade
receptacle. Anchor locking screw on plug when screwed down resists pullout of the
cable set. IP55 SUITABILITY (CONNECTOR).
HBL61CM22
Same as HBL61CM22, except white.
HBL61CM22W
Permits use of 30A 125V cable set, HBL61CM08 with 20A 125V Twist-Lock receptacle,
HBL23CM10. IP55 SUITABILITY (CONNECTOR).
HBL61CM25
Permits use of 50A 125V cable set, HBL61CM53 with 15 or 20A 125V straight blade
receptacle. IP55 SUITABILITY (CONNECTOR).
HBL61CM54
Permits use of 30A 125V cable set, HBL61CM08 with 50A 125V Twist-Lock receptacle,
HBL63CM70. IP55 SUITABILITY (CONNECTOR).
HBL61CM55
Permits use of 50A 125V cable set, HBL61CM53 with 30A 125V Twist-Lock receptacle,
HBL26CM10. IP55 SUITABILITY (CONNECTOR).
HBL61CM56
Permits use of 30A 125V cable set, HBL61CM08 with 50A 125/250V Twist-Lock
receptacle, HBL63CM69. IP55 SUITABILITY (CONNECTOR).
HBL61CM71
Permits use of 50A 125V cable set, HBL61CM53 with 50A 125/250V Twist-Lock
receptacle, HBL63CM69. IP55 SUITABILITY (CONNECTOR).
HBL61CM72
Permits use of 15A 125V 3 wire straight blade plug with 15 or 20A 125V 2 wire straight
blade receptacle. IP55 SUITABILITY (CONNECTOR).
HBL5273L*
Permits a 100A 125/250V cable set to plug into a single 50A 125/250V outlet.
IP55 SUITABILITY (CONNECTOR).
HBL61CM100**
Permits use of 15A straight blade plug with 30A 125V Twist-Lock receptacle; with
GFCI protection. IP55 SUITABILITY (PLUG).
HBL105GF**
HBL31CM28
HBL21CM29
HBL61CM22
HBL61CM25
HBL61CM56
Molded Y Adapters — Now CSA Compliant
Description
Catalog Number
Permits use of two 30A 125V cable sets, HBL61CM08, with one 50A 125/250V
receptacle, HBL63CM69. IP55 SUITABILITY (CONNECTORS).
HBL64CM54
Permits use of two 50A 125V cables sets, HBL61CM53, with one 50A 125/250V
receptacle, HBL63CM69. IP55 SUITABILITY (CONNECTORS).
HBL64CM55
Permits use of two 30A 125V cable sets, HBL61CM08, with one 30A 125V receptacle,
HBL26CM10. IP55 SUITABILITY (CONNECTORS).
HBL64CM56
Permits use of two 30A 125V cable sets, HBL61CM08, with one 50A 125V receptacle,
HBL63CM70. IP55 SUITABILITY (CONNECTORS).
HBL64CM57**
HBL61CM100
Note: *UL Listed.
**Not CSA Certified.
The male plug end (50A 125/250V) has a blade removed and the blade slot filled with epoxy. Omitting the blade
ensures achieving 125V safely.
Adapters do not provide overcurrent protection and do not provide GFCI protection except HBL105GF.
HBL105GF
HBL64CM54
www.hubbell-wiring.com
HBL64CM55
HBL64CM56
®
HBL64CM57
Wiring Device-Kellems
Y-29
Marine Products
Telephone and Cable TV Devices
Telephone and Cable TV Ship-to-Shore Devices
HBLPHTVNM
HBLPHTVSS
HBLTVSS
Description
Catalog Number
Stylized non-metallic inlet provides telephone and cable TV connections in one unit. UV
resistant white Centrex® cover makes unit weatherproof when completely closed. Mounting
holes are 2.38 in. (60.3) on centers and match existing mounting patterns. Mounting screws
and gasket provided. IP55 SUITABILITY.
HBLPHTVNM
Traditional stainless steel inlet provides connections for telephone and cable TV in one unit.
Connections can be used individually or together. Gasketed cover is self-closing so interior
is shielded from the elements when not in use. Watertight when cover is screwed in place.
Mounting holes are 2.38 in. (60.3) on centers. Mounting screws and gasket included.
IP56 SUITABILITY.
HBLPHTVSS
Same as HBLPHTVSS above except no phone.
HBLTVSS
Replacement int. for PH6594TV and HBLPHTVSS series inlets.
CR16914
Black locking type plug for telephone cable sets or adapters.
PH6625
Black locking type connector body used on telephone cable sets or adapters.
PH6624
Yellow Seal-Tite® cover for weatherproofing PH6624 connector body on cable sets
when connecting to an inlet and for weather-proofing PH6625 plug. IP20 SUITABILITY.
PH7440
Yellow Seal-Tite cover for weatherproofing PH6624 connector body when used on
extension cords or adapters. IP55 SUITABILITY.
PH7499
Factory pre-wired 50 ft. (15.2m) telephone cable set. Uses 3 conductor, #16 AWG
type SJTO, yellow vinyl cord for marine and recreational vehicle applications.
IP20 SUITABILITY.
PH6599
Same as PH6599 except white in color.
PH6599W
Same as PH6599 except 25 ft. (7.6m) in length.
PH6598
Same as PH6598 except white in color.
PH6598W
PH6625
PH6624
PH6599
PH6599W
PH6598
PH6598W
PH7440
Y-30
Centrex® is a registered trademark of LANXESS Corporation.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Telephone and Cable TV Devices
Telephone and Cable TV Ship-to-Shore Devices
Description
Catalog Number
Black polycarbonate combination telephone/TV outlet with spring-loaded weatherproof lift
cover. Can be wired for telephone service only or for telephone and MATV/CATV services in
one FS/FD box in both marinas and RV parks. Can be padlocked to prevent unauthorized use.
IP44 SUITABILITY.
PH6597TV
Black polycarbonate cable TV outlet has coax connector and gasketed, spring-loaded lift cover
for weatherproofing. Designed for mounting to FS/FD type weatherproof boxes (like PH6619) in
both marinas and RV parks. IP20 SUITABILITY.
TV97
Black polycarbonate telephone outlet has gasketed, spring-loaded lift cover for
weatherproofing. Designed for mounting to FS/FD type weatherproof boxes (like PH6619)
in both marinas and RV parks. IP20 SUITABILITY.
PH6597
Black polycarbonate telephone outlet has gasketed, spring-loaded lift cover for
weatherproofing. Can be used to retrofit old style telephone outlets of Pauluhn Manufacturing
Company (2833 and 2843) in both marinas and RV parks. IP20 SUITABILITY.
PH6596
Black polycarbonate RV inlet for telephone connection only. Has spring-loaded, gasketed
weatherproof lift cover designed for mounting to FS/FD type weatherproof boxes.
IP20 SUITABILITY.
PH6595
Black non-metallic FS box with ¾ in. threaded hubs used for mounting phone and TV
outlets and PH6595 recreational vehicle inlet (see PH6621 for mounting box on recreational
vehicle). Cord connector included for strain relief and to maintain watertight integrity of box
when cable is used. PVC adapter also included for connection of PVC conduit to box.
PH6619
Stainless steel bracket for mounting PH6619 FS box to recreational vehicles when used
with PH6595 inlet.
PH6621
50 ft. (15.2m) yellow jacketed ship-to-shore TV cable set is the industry standard 75 Ohm,
RG59-U with male plugs on both ends. Adapter included for a quick, slip-on connection
to inlet on boat.
TV99
Same as TV99 except white in color.
TV99W
Same as TV99 except 25 ft. (7.6m) in length.
TV98
Same as TV98 except white in color.
TV98W
PH6597TV
TV97
PH6597
PH6596
PH6595
TV99
TV99W
TV98
TV98W
PH6619
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-31
Marine Products
30 Amp 28 Volt DC Rated
Electric Fishing Reel Devices
Hubbell has a DC rated electrical system designed specifically for larger electric
fishing reel systems. Up until now, larger electric fishing reel systems typically
utilized conventional 30 Amp AC rated devices since an appropriately rated DC
system was not available.
The system features a corrosion-resistant plug, connector body and receptacle
and can be used along with a Hubbell outlet box and weatherproof cover plate
to complete the installation. These devices are all rated at 28 Volt DC and are
applicable for all 12, 24 and 32 Volt DC fishing reel systems. The devices are
UL listed and CSA certified. All devices are made of high-visibility yellow nylon
that is impact resistant and UV stabilized for longer life. Also, the contacts
are nickel plated for corrosion resistance.
30A 28V DC Rated Devices
HBL328DCR
Description
Catalog Number
Yellow locking single receptacle with abuse-resistant face. Can be mounted in
Hubbell box HBL6083 and used wit HBL74CM25WOA weatherproof plate.
HBL328DCR
Yellow locking plug has rugged nylon housing and rear dust seal to keep dust
and foreign matter out.
HBL328DCP
Yellow locking connector body has rugged, nylon housing and rear dust seal to
keep dust and foreign matter out.
HBL328DCC
Accessories
HBL328DCP
HBL328DCC
Description
Catalog Number
Gray, high-impact thermoplastic FD (deep) weatherproof box with ¾ in. (19.1) NPT
threaded hub, with 30 cubic inch capacity.
HBL6083
Same as HBL6083 except yellow in color.
HBL60CM83A
Same as HBL6083 except white in color.
HBL60CM83WA
Black phenolic type FS (shallow) weatherproof box has two ¾ in. (19.1) I.P.S. molded-in
knockouts. 4.56 in. H x 2.94 in. W x 2.19 in. D (115.9H x 74.6W x 55.6D) and has
16 cubic inch capacity.
HBL6080OS
Spring-loaded lift cover, for weatherproofing HBL328DCR outlet. Yellow in color.
HBL74CM25WOA
Same as HBL74CM25WOAW except white in color.
HBL74CM25WOAW
Same as HBL74CM25WOAW except gray in color.
HBL7425WOA
Note: See page Y-46 for 55° angle adapters and additional accessories.
HBL60CM83A
Y-32
HBL6080OS
®
HBL74CM25WOA
Wiring Device-Kellems
HBL74CM25WOAW
www.hubbell-wiring.com
Marine Products
12 Volt DC Rated Switches
KEY CHART
M11SP
1. Toggle switch
Fits panels up to ¼ in.
thick when not using the
back-up nut provided;
fits panels up to ³⁄₁₆ in.
thick when using the
back-up nut. Requires
a ½ in. mounting hole.
M11LRGSP
2. Lighted toggle switch
Built-in pilot light
(R=red, G=green) for
night vision. Same
panel specs as 1.
M11LTR
MR11SP
3. Lighted-tip toggle switch
Red pilot light visible in
tip of toggle only. Same
panel specs as 1.
4. Rocker switch
Requires a 1½ in. high
x ⁷⁄₈ in. wide rectangular
opening.
MR123LRSP
5. Lighted rocker switch
Built-in pilot light for
night vision. Same
panel specs as 4.
Panel Mount Toggle and Rocker Switches
Description
Typical Applications
Single pole, single throw,
ON/OFF.
Lights, bilge blower, bilge pump(s),
accessories
Single pole, single throw,
ON/OFF/ON.
Key
Catalog Number
M11SP
M11LRSP
M11LRGSP
M11LTR
MR11SP
MR11LRSP
M11SP
Horn, starter, winches, gauges
M11MSP
MR11MSP
M123SP
Single pole, double throw,
ON/OFF/ON.
Bilge pumps, speed selector,
lights, navigation lights
M123SP
M123LTR
MR123SP
MR123LRSP
Single pole, double throw,
Momentary ON/OFF/ON.
Bilge pumps
1
4
M123MSP
MR123MSP
Single pole, double throw.
Momentary ON/OFF/Momentary ON.
Trim Tabs
1
4
M123MMSP
MR123MMSP
Double pole, single throw,
ON/OFF.
Lights, accessories
1
4
M21SP
MR21SP
Double pole, double throw,
ON/OFF/ON.
Navigation lights, wipers,
dual fuel tanks
1
4
5
M223SP
MR223SP
MR223LRSP
Double pole, double throw,
ON/OFF/ON (with jumper).
Navigation lights, windlass
1
M223JSP
Double pole, double throw.
Momentary ON/OFF/Momentary ON.
Winches, trim tabs,
dual fuel tanks
1
4
M223MMSP
MR223MMSP
Black silicone rubber boot bonded
to brass nut.
Provides positive seal against
moisture, oil, etc. Fits any
non-lighted toggle switch.
MSB1
Push-button horn switch with ¹⁵⁄₃₂ in.
long nickel plated brass mounting stem.
Terminals are .25 in. spade.
For remote operation of horn.
MH11
Black push-button (horn) boot.
Fits MH11 horn switch.
1
2
2
3
4
5
M21SP
M223SP
MSB1
MH11
MHB11
MHB11
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-33
Marine Products
15 Amp Twist-Lock® Devices and Accessories
15A 125V
NEMA L5-15R
UL/CSA
15A 125V AC Twist-Lock® Devices
HBL47CM00
Description
Catalog Number
Yellow duplex receptacle has heat resistant body. IP20 SUITABILITY.
HBL47CM00
Yellow Insulgrip® plug has rugged nylon housing and detachable cord grip with range
of .30–.69 in. (7.5–17.4) that utilizes a unique offset jaws arrangement to provide secure
strain relief. IP20 SUITABILITY.
HBL47CM20C
Yellow Insulgrip connector body has rugged nylon housing and detachable cord grip
with range of .30–.69 in. (7.5–17.4) that utilizes a unique offset jaws arrangement to
provide secure strain relief. IP20 SUITABILITY.
HBL47CM29C
Panel mount flanged outlet has heat resistant melamine interior and stainless steel casing.
IP20 SUITABILITY.
HBL47CM15
Panel mount flanged inlet has heat resistant melamine interior and stainless steel casing.
IP20 SUITABILITY.
HBL47CM16
HBL47CM20C
Accessories
HBL47CM29C
HBL47CM15
Description
Catalog Number
Yellow Valox® spring-loaded lift cover for weatherproofing duplex receptacles. Stainless steel
screws and neoprene gasket included for mounting to FS/FD type weatherproof boxes.
IP20 SUITABILITY.
HBL52CM21
Same as HBL52CM21 except white in color
HBL52CM21W
Same as HBL52CM21 except gray in color.
HBL5221
Same as HBL52CM21 except for mounting to standard boxes.
HBL52CM22
Same as HBL52CM22 except gray in color.
HBL5222
Short yellow Seal-Tite® cover for weatherproofing HBL47CM20C Insulgrip plug when used
with receptacles or connector bodies. Also can be used to weatherproof HBL47CM29C
Insulgrip connector body when used with HBL47CM16 flanged inlet. IP44 SUITABILITY.
HBL60CM23**
Yellow Seal-Tite cover for weatherproofing HBL47CM29C Insulgrip connector body
when used on extension cords and adapters. IP20 SUITABILITY.
HBL60CM24**
Three conductor, #14 AWG type STW, yellow PVC jacketed portable cord has jute fillers
for added flexibility and is ideal for making cable sets, extension cords and adapters as
it will not mark the boat’s deck. Available in 250 ft. (76.2m) length only.
YC314250
Note: **Not UL Listed or CSA Certified.
HBL47CM16
HBL60CM23
HBL60CM24
HBL52CM21W
YC314250
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Y-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
15 Amp Straight Blade Devices and Accessories
15A 125V
NEMA 5-15R
UL/CSA
15A 125V AC Straight Blade Devices
Description
Catalog Number
Yellow corrosion-resistant/weather resistant duplex receptacle. Use outdoors
or where salt and other corrosive materials are a problem. Accepts 15A 125V,
2 pole 3 wire straight blade plugs. IP20 SUITABILITY.
Same as HBL52CM62 except ivory in color.
Single version of HBL52CM62 duplex yellow receptacle. IP20 SUITABILITY.
Yellow Insulgrip® plug has rugged nylon housing and detachable cord grip with
range of .23–.72 in. (5.8–18.3) that utilizes a unique offset jaws arrangement for
secure strain relief. IP20 SUITABILITY.
Yellow Insulgrip connector body has rugged nylon housing and detachable cord grip
with range of .23–.72 in. (5.8–18.3) that utilizes a unique offset jaws arrangement for
secure strain relief. IP20 SUITABILITY.
Yellow Valise® plug has one-piece nylon housing that assembles easily with two
screws. Built-in cord grip has range of .22–.66 in. (5.6–16.8). IP20 SUITABILITY.
Yellow Valise connector body has one-piece nylon housing that assembles
easily with two screws. Built-in cord grip has range of .22–.66 in. (5.6–16.8).
IP20 SUITABILITY.
Yellow Insulgrip plug with anchor locking screw to prevent accidental pull-out.
The plug is “locked” into the receptacle when the screw is turned down so the
head is flush with the plug surface. The cord grip range is .30–.69 in. (7.5–17.4).
UL Recognized Component. IP20 SUITABILITY.
Compact gray nylon panel mount inlet ideal for bass boat battery charging
connection. Has gasketed spring-loaded lift cover for weatherproofing front
and neoprene boot for weatherproofing rear. Will accept both 15A 125V and
20A 125V, 2 pole 3 wire straight blade connector bodies. IP44 SUITABILITY.
Same as HBL61CM64 except black in color.
HBL52CM62
HBL52CM62I
HBL52CM61
HBL52CM66C
HBL52CM62
HBL52CM61
HBL52CM69C
HBL52CM66V
HBL52CM69V
HBL52CM66C
HBL52CM80C
HBL61CM64
HBL52CM69C
HBL61CM64BK
Note: See page Tech-10 for Weather Resistant descriptions.
Accessories
Description
Catalog Number
Yellow Seal-Tite® cover for weatherproofing straight blade Insulgrip plugs,
HBL52CM66C and HBL53CM66C, when used with receptacles and connector
bodies. Can also be used to weatherproof Insulgrip connector bodies when
mating with flanged inlets. IP44 SUITABILITY. Note: For Insulgrip devices only.
Yellow Seal-Tite cover for weatherproofing straight blade Insulgrip connector bodies,
HBL52CM69C and HBL53CM69C, on extension cords and adapters.
IP55 SUITABILITY. Note: For Insulgrip devices only.
Yellow Valox® spring-loaded lift cover for weatherproofing duplex receptacles.
Stainless steel screws and neoprene gasket included for mounting to FS/FD type
weatherproof boxes. IP20 SUITABILITY.
Same as HBL52CM21 except gray in color.
Same as HBL52CM21 except for mounting to standard boxes.
Same as HBL52CM22 except gray in color.
Yellow Valox spring-loaded lift cover for weatherproofing single straight blade
receptacles. Stainless steel screws and neoprene gasket included. For mounting
to FS/FD type weatherproof boxes. IP44 SUITABILITY.
Same as HBL74CM23WO except gray in color.
HBL60CM17**
HBL52CM80C
HBL60CM18**
HBL52CM21
HBL5221
HBL52CM22
HBL5222
HBL74CM23WO
HBL7423WO
Note: **Not UL Listed or CSA Certified.
HBL60CM17
HBL52CM66V
HBL52CM69V
HBL60CM18
HBL60CM19
HBL52CM21
HBL74CM23WO
HBL61CM64
Rynite® is a registered trademark of E. I. DuPont.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-35
Marine Products
Plugs, receptacles
and connectors only.
20 Amp Twist-Lock® Devices and Accessories
W
G
20A 125V
NEMA L5-20R
UL/CSA
20A 125V Twist-Lock® Devices
HBL23CM10
Description
Catalog Number
Yellow single receptacle has Rynite® body and abuse resistant nylon face.
IP20 SUITABILITY.
HBL23CM10
Yellow Insulgrip® plug has rugged nylon housing and cord grip with range of
.36–.93 in. (9–24) that utilizes a unique offset jaws arrangement to provide
secure strain relief. IP20 SUITABILITY.
HBL23CM11
Yellow Insulgrip connector body has rugged nylon housing and cord with range
of .36–.93 in. (9–24) that utilizes a unique offset jaws arrangement to provide
secure strain relief. IP20 SUITABILITY.
HBL23CM13
Yellow Valise plug has one-piece nylon housing, assembles easily with two screws.
Built-in cord grip has range of .33–.72 in. (8.3–18.2). IP20 SUITABILITY.
HBL23CM11V
HBL23CM11
Accessories
HBL23CM13
Description
Catalog Number
Yellow polycarbonate spring-loaded lift cover for weather-proofing HBL23CM10 receptacle.
Meets the most stringent requirements of UL’s three listing categories for weatherproof
plates. Stainless steel screws and neoprene gasket included for mounting to FS/FD type
weatherproof boxes. IP44 SUITABILITY.
HBL74CM25WOA
Same as HBL74CM25WOA except gray in color.
HBL7425WOA
Same as HBL74CM25WOA except white in color.
HBL74CM25WOAW
Seal-Tite®
HBL23CM11V
HBL60CM31
cover for weatherproofing HBL26CM11 or HBL23CM11 plugs.
Yellow
IP44 SUITABILITY. Note: Fits Insulgrip devices only.
HBL60CM31**
Same as HBL60CM31 except white in color.
HBL60CM31W**
Yellow Seal-Tite cover for weatherproofing HBL26CM13 or HBL23CM13 connector
bodies when used on extension cords or adapters. IP44 SUITABILITY.
Note: Fits Insulgrip devices only.
HBL60CM32**
Yellow vinyl Seal-Tite cover for weatherproofing HBL23CM13V or HBL26CM13V
connector bodies. IP44 SUITABILITY. Note: Fits Valise® devices only.
HBL60CM32V**
Yellow Seal-Tite cover for weatherproofing HBL23CM11V or HBL26CM11V plugs.
IP44 SUITABILITY. Note: Fits Valise devices only.
HBL60CM31V**
Three conductor, #12 AWG type STW, yellow PVC jacketed portable cord with
jute fillers for added flexibility. Ideal for making cable sets, extension cords and
adapters as will not mark boat’s deck. Available in 250 ft. (76.2m) length only.
YC312250
Note: **Not UL Listed or CSA Certified.
HBL60CM31V
HBL60CM32
HBL60CM32V
HBL74CM25WOA
YC312250
Rynite® is a registered trademark of E. I. DuPont.
Y-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
20 Amp Straight Blade Devices and Accessories
20A 125V
NEMA 5-20R
UL/CSA
20A 125V AC Straight Blade Devices
Description
Catalog Number
Yellow corrosion-resistant/weather resistant duplex receptacle. Use outdoors or
where salt and other corrosive materials are a problem. Accepts both 20A 125V
and 15A 125V, 2 pole 3 wire straight blade plugs. IP20 SUITABILITY.
HBL53CM62
Single version of HBL53CM62 duplex yellow receptacle. IP20 SUITABILITY.
HBL53CM61
Yellow Insulgrip® plug has rugged nylon housing and detachable cord grip with
range of .23–.72 in. (5.8–18.3) that utilizes unique offset jaws arrangement to
provide secure strain relief. IP20 SUITABILITY.
HBL53CM66C
Yellow Insulgrip connector body has rugged nylon housing and cord grip with
range of .23–.72 in. (5.8–18.3) that utilizes unique offset jaws arrangement for
secure strain relief. IP20 SUITABILITY.
HBL53CM69C
Compact gray nylon panel mount outlet ideal for electric trolling motors and reel
applications. Features gasketed spring-loaded lift cover for weatherproofing front
and neoprene boot for weatherproofing rear. Accepts both 20A 125V and 15A 125V,
2 pole 3 wire straight blade plugs. IP44 SUITABILITY.
HBL61CM65
HBL53CM62
HBL53CM61
HBL53CM66C
Note: See page Tech-10 for Weather Resistant descriptions.
Accessories
Description
Catalog Number
Seal-Tite®
Yellow
cover for weatherproofing straight blade Insulgrip plugs,
HBL52CM66C and HBL53CM66C, when used to mate receptacles and
connector bodies. Can also be used with Insulgrip connector bodies when
mating with flanged inlets. IP44 SUITABILITY. Note: For Insulgrip devices only.
HBL60CM17**
Yellow Seal-Tite cover for weatherproofing straight blade Insulgrip connector bodies,
HBL52CM69C and HBL53CM69C, on extension cords and adapters.
IP55 SUITABILITY. Note: For Insulgrip devices only.
HBL60CM18**
Yellow closure plug used with HBL60CM18 long Seal-Tite cover to prevent water
from entering front of device when not in use. IP55 SUITABILITY.
HBL60CM19**
Yellow polycarbonate spring-loaded lift cover for weatherproofing duplex
receptacles. Stainless steel screws and neoprene gasket included for mounting
to FS/FD type weatherproof boxes. IP20 SUITABILITY. Not CSA certified.
HBL52CM21
Same as HBL52CM21 except white in color.
HBL52CM21W
Same as HBL52CM21 except gray in color.
HBL5221
Same as HBL52CM21 except for mounting to standard boxes.
HBL52CM22
Same as HBL52CM22 except gray in color.
HBL5222
Yellow polycarbonate spring-loaded lift cover for weatherproofing single straight
blade receptacles. Stainless steel screws and neoprene gasket included. For
mounting to FS/FD type weatherproof boxes. IP44 SUITABILITY. Not CSA certified.
HBL74CM23WO
Same as HBL74CM23WO except gray in color.
HBL7423WO
HBL53CM69C
HBL52CM66V
HBL52CM69V
Note: **Not UL Listed or CSA Certified.
HBL61CM65
HBL60CM17
HBL52CM21
HBL52CM21W
HBL74CM23WO
HBL7423WO
Rynite® is a registered trademark of E. I. DuPont.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-37
Marine Products
Testers, Surge Protection and USB Charger Receptacles
Hubbell Twist-Lock® Circuit Tester
Description
Catalog Number
Styled and sized like a standard Hubbell Twist-Lock® Plug. Simply plug it in and the LED
back panel immediately identifies if the connections are made correctly and are in the correct
position, ensuring the device is wired properly. An easy to read card is provided with the tester,
to help determine if the connections are correct. This tester is compact and can easily clip
onto your tool belt. The Hubbell Circuit Tester is UL and C-UL Listed.
HBLT26CM11
HBLT26CM11
GFT2G
HBL5200
Additional Testers
Description
Catalog Number
This unit is designed to measure the trip level of GFCI portables, receptacles, or breakers within
any range from 2 to 7 milliamperes, or the leakage in portable tools or appliances within a
leakage range of 1 to 7 milliamperes. It can be used on any AC circuit of 110 to 130V.
GFT2G*
This outlet circuit tester has a simple arrangement of neon lights which visually indicate correct
wiring, reversed polarity, open ground wire, open neutral wire, open hot wire, hot and ground
reversed and hot wire on neutral terminal and hot terminal unwired. Simply plug the HBL5200
into a single phase 125V 2 pole 3 wire outlet and the combination of lighted and/or unlighted
lamps will immediately indicate the condition of the circuit. The instructions and symbol
identification are printed on durable polyester labels permanently attached to the tester.
To test other 2 pole 3 wire single phase 125V outlets, use one of the proper adapters
shown on page Y-29.
HBL5200**
Note: *Not UL Listed or CSA Certified.
**Not CSA Certified.
Surge Suppression Receptacle
Surge suppression receptacles 15A 125V AC Nominal. UL Listed at 600V voltage protection level.
Suitable for ANSI/IEEE C 62.41-installation categories “A” (outlets and long branch circuits) and “B”
(major feeders and short branch circuits). The Hubbell Surge Suppression Receptacle helps protect your
electronic equipment from damage caused by transient voltages. The receptacle contains metal oxide
varisters which dissipate the electrical energy of voltage spikes without interfering with normal operations.
HBL5262ISA
Description
Color
Catalog Number
duplex surge suppression receptacle with power on indicator light
and damage-alert alarm beeper.
Ivory
HBL5262ISA
USB Charger Tamper-Resistant Duplex Receptacle,
New with 3.8 Amps of Charging Power
Hubbell’s USB Charger Receptacle provides both
Charge Devices Simultaneously!
USB and AC electrical power in a standard single gang
electrical opening. Designed to provide more charging
options for personal electronics.
USB15X2W
• Tablets
• Smartphones
• MP3 players
• Apple® iPad®
• Apple® iPod®
• Apple® iPhone®
Description
Color
Catalog Number
15A 125V AC USB Charger Tamper-Resistant receptacle,
Two USB Type 2.0 ports 3.8 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC decorator duplex.
Black
Brown
Gray
Ivory
Light Almond
White
USB15X2BK
USB15X2
USB15X2GY
USB15X2I
USB15X2LA
USB15X2W
Note: See page Tech-10 for Tamper-Resistant descriptions.
Apple, iPad, iPod and iPhone are registered trademarks of Apple, inc.
Y-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
GFCI and Portable Ground Fault Circuit Interrupters
The American Boat and Yacht Council recommends the use of ground fault protected
receptacles in a head, galley, machinery space or on a weather deck. Refer to ABYC
“Ground Fault Protection” on page Y-48.
Ground Fault Circuit Interrupter (GFCI) Receptacles - 2015 Code Compliant
These UL Listed receptacles have been designed to protect people from line-to-ground electrical shock
hazards which may develop from faulty appliance, tools or defective portable cords. If a ground fault does
occur and the leakage level exceeds 4 to 6 milliamperes, the GFCI unit quickly acts to protect the user by
opening the circuit, thus interrupting the power supply and limiting the duration of any electrical current flow.
After tripping, the receptacle is reset by pushing a button on its face. A test button allows the user to test
that the GFCI is in working order.
Note: The 2015 UL 943 requirements apply to all permanently installed GFCI devices. Each device must
automatically monitor GFCI functionality every (3) hours or less. If the device can no longer provide
GFCI protection it must deny power and provide a visual and/or audible indication for end of life.
All GFCIs manufactured prior to June 29th, 2015 are grandfathered from these new requirements.
GFRST52MW
Hubbell’s GFCI receptacles can be mounted on any standard 2.50 inch (63.5) deep box. A feed-through
feature provides protection not only at that receptacle but also at any other receptacle located downstream
from it on the same circuit. These devices meet the requirements of The National Electric Code (NEC)
and American Boat and Yacht Council Standard and will accept locking fork terminals.
Caution: Ground Fault Receptacles should not be mounted in locations exposed to salt spray nor in the
engine room. For GFCI protection of such locations, downstream feeding from an internally located
Ground Fault Receptacle is recommended.
Description
Color
Catalog Number
15A 125V GFCI duplex receptacle with power denial.
Nylon wallplate included.
Brown
Gray
Ivory
White
GFRST52M
GFRST52MGY
GFRST52MI
GFRST52MW
PVC weatherproof lift cover for ground fault receptacles (such as GFRST52M series)
and Style Line® receptacles. For vertical mounting in standard or FS/FD type boxes.
Gray
White
CWP26CR
CWP26CRW
CWP26CRW
Portable Ground Fault Circuit Interrupters (GFCI)
GFP15M
Ideal for providing safety in applications requiring multiple outlets, features gasketed cover to protect
outlets not in use. Ensures safety by interrupting power when leakage to ground is 4 to 6 milliamperes.
A test button allows the user to test that the GFCI is in working order. This portable solution provides
open neutral protection.
Description
Catalog Number
The housing is high-impact yellow polycarbonate as are the liftcovers which protect the
receptacles from dirt and damage. Incorporates a 20 Amp GFCI module that can be
replaced in the field. The module provides not only ground fault protection, but also
contains the no voltage release feature.
GFP15M
3-outlet plug-in unit. Plugs into boat convenience receptacles to provide ground fault protection.
GFP315A
Note: GFCI devices will not protect against overloads or short circuits.
GFP315A
15A 125V GFCI Line Cord Devices
Description
Ideal for personal plug-in protection at marinas and onboard boats when
used with pumps, drills, sanders and all portable electrical equipment. GFCI
mechanism is watertight and approved for outdoor use. High visibility yellow
SJTW-A power cord resists moisture, chemicals and sunlight.
www.hubbell-wiring.com
Line Cord Length
Catalog Number
6 ft. (1.8m)
GFP6C15M
25 ft. (7.6m)
GFP25C15M
GFP6C15M
GFP25C15M
®
Wiring Device-Kellems
Y-39
Marine Products
RoHS
15 and 20 Amp Receptacles
Style Line® Decorator Receptacles
• High-impact nylon face resists breaking, chipping and cracking.
• Will accept locking fork terminal to comply with ABYC standards.
• Available in 4 colors for any decor with matching wall plates.
• Smooth, high-gloss finish for rich appearance.
Commercial Style Line® Decorator Series
Description
Color
15A 125V duplex receptacle. Almond
Black
Brown
Gray
Ivory
Light Almond
White
DR15ITR
DR15GRYWRTR
Standard
Duplex
Duplex,
Tamper-Resistant
Duplex, Weather and
Tamper-Resistant
DR15AL
DR15BLK
DR15
DR15GRY
DR15I
DR15LA
DR15WHI
DR15ALTR
DR15BLKTR
DR15TR
DR15GRYTR
DR15ITR
DR15LATR
DR15WHITR
–
DR15BLKWRTR
DR15WRTR
DR15GRYWRTR
DR15IWRTR
DR15LAWRTR
DR15WHIWRTR
Standard Duplex,
Spec. Grade,
Side Wired
Duplex,
Tamper-Resistant
Duplex, Weather and
Tamper-Resistant,
Back and Side Wired
CR15AL
CR15BLK
CR15
CR15GRY
CR15I
CR15LA
CR15WHI
CR15ALTR
CR15BLKTR
CR15TR
CR15GRYTR
CR15ITR
CR15LATR
CR15WHITR
–
BR15BLKWRTR
BR15WRTR
BR15GRYWRTR
BR15IWRTR
BR15LAWRTR
BR15WHIWRTR
Commercial Series
Description
Color
15A 125V duplex receptacle. Almond
Black
Brown
Gray
Ivory
Light Almond
White
Note: All devices above will accept locking fork terminal to comply with ABYC standards.
See page Tech-10 for Tamper and Weather Resistant descriptions.
CR15TR
BR15IWRTR
Extra Heavy Duty Single Receptacles
HBL5251
HBL5361I
Description
Color
Catalog Number
15A 125V single receptacle.
Brown
Ivory
HBL5251
HBL5251I
20A 125V single receptacle.
Brown
Ivory
HBL5361
HBL5361I
Description
Color
Catalog Number
15A 125V yellow corrosion-resistant duplex receptacle.
Use where salt or other corrosive elements are a problem.
Yellow
HBL52CM62
Same as HBL52CM62 except ivory in color.
Ivory
HBL52CM62I
Description
Color
Catalog Number
Illuminated receptacle 15A 125V grounding. A high quality
receptacle with an illuminated face. Ideal for use in halls or
as a gentle night light.
Ivory
HBL8200ILI
Corrosion-Resistant Receptacles
Special Application Illuminated Receptacle
HBL52CM62I
Y-40
HBL8200ILI
Note: See page Tech-10 for Weather Resistant descriptions.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
RoHS
Switches and Accessories
Commercial Series
Description
Toggle Color
Catalog Number
15A single-pole toggle switch for controlling
AC load from one point.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
CS115AL
CS115BK
CS115
CS115GY
CS115I
CS115LA
CS115W
15A three-way toggle switch for controlling
AC load from two points.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
CS315AL
CS315BK
CS315
CS315GY
CS315I
CS315LA
CS315W
CS115I
Note: All devices above will accept locking fork terminal to comply with ABYC standards.
Special Application Series
Description
Catalog Number
20A 120V toggle switch with LED lamp set in ivory handle. Handle illuminates
when switch is in “OFF” position.
HBL1221IL
20A 120V three-way toggle switch with LED illuminated ivory handle for controlling
AC load from two points. Handle illuminates when “OFF”.
HBL1223IL
20A 120V single-pole toggle switch with LED lamp set in clear red handle.
Handle illuminates when switch is “ON”. Serves as instant reminder that current
is flowing to an appliance.
HBL1221PL
20A 120V three-way toggle switch with LED for controlling AC load from two points.
Red handle illuminates when “ON”.
HBL1223PL
Single-pole PresSwitch® for controlling AC load from one point.
Switch activated brown button.
HBL1281
Same as HBL1281 except ivory button.
HBL1281I
Three-way PresSwitch for controlling AC load from two points.
Switch activated brown button.
HBL1283*
Same as HBL1283 except ivory button.
HBL1283I*
HBL1221IL
HBL1221PL
HBL1281
HBL1283
Accessories
Description
Catalog Number
Yellow neoprene weatherproof plate for use only with PresSwitches.
PresSwitch button is activated when bubble is pressed. Not CSA certified.
HBL17CM50*
Clear silicone rubber weatherproof bubble plate for use with all AC toggle switches
and PresSwitches. Also ideal for use with lighted handle toggle switches.
Not CSA certified.
HBL1795
Plastic switch/receptacle box. Measures 3.281" x 2.188" x 2.50" (83.3 x 55.6 x 63.5) deep.
For mounting in walls without studs. A support strap is provided which pulls box tightly
against back side of wall.
HBL6079**
HBL17CM50
HBL1795
Note: *Not UL Listed.
**Not CSA Certified.
HBL6079
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-41
Marine Products
Wallplates
• Nylon plates—virtually unbreakable
• Rounded corners for stylish look
• Reinforced ribs for extra strength
• Screws are factory-inserted for fumble-free installation
Y-42
Smooth Nylon
Mid-Size
Material
Smooth Metal
Catalog Number
NPJ1BK
NPJ1
NPJ1GY
NPJ1I
NPJ1W
Brass
Stainless Steel
SB1
SS1
NP8BK
NP8
NP8GY
NP8I
NP8W
NPJ8BK
NPJ8
NPJ8GY
NPJ8I
NPJ8W
Brass
Stainless Steel
SB8
SS8
Black
Brown
Gray
Ivory
White
NP26BK
NP26
NP26GY
NP26I
NP26W
NPJ26BK
NPJ26
NPJ26GY
NPJ26I
NPJ26W
Brass
Stainless Steel
SB26
SS26
2-Gang,
2-Toggle
Black
Brown
Gray
Ivory
White
NP2BK
NP2
NP2GY
NP2I
NP2W
NPJ2BK
NPJ2
NPJ2GY
NPJ2I
NPJ2W
Brass
Stainless Steel
SB2
SS2
2-Gang,
2-Duplex
Black
Brown
Gray
Ivory
White
NP82BK
NP82
NP82GY
NP82I
NP82W
NPJ82BK
NPJ82
NPJ82GY
NPJ82I
NPJ82W
Brass
Stainless Steel
SB82
SS82
2-Gang,
2-Decorator
Black
Brown
Gray
Ivory
White
NP262BK
NP262
NP262GY
NP262I
NP262W
NPJ262BK
NPJ262
NPJ262GY
NPJ262I
NPJ262W
Brass
Stainless Steel
SB262
SS262
2-Gang,
1-Toggle,
1-Duplex
Black
Brown
Gray
Ivory
White
NP18BK
NP18
NP18GY
NP18I
NP18W
NPJ18BK
NPJ18
NPJ18GY
NPJ18I
NPJ18W
Brass
Stainless Steel
SB18
SS18
2-Gang,
1-Toggle,
1-Decorator
Black
Brown
Gray
Ivory
White
NP126BK
NP126
NP126GY
NP126I
NP126W
NPJ126BK
NPJ126
NPJ126GY
NPJ126I
NPJ126W
Brass
Stainless Steel
SB126
SS126
1-Gang,
1-Single
1.40" Dia. Hole
Black
Brown
Gray
Ivory
White
NP7BK
NP7
NP7GY
NP7I
NP7W
NPJ7BK
NPJ7
NPJ7GY
NPJ7I
NPJ7W
Brass
Stainless Steel
SB7
SS7
1-Gang,
1-Blank,
Box Mount
Black
Brown
Gray
Ivory
White
NP13BK
NP13
NP13GY
NP13I
NP13W
NPJ13BK
NPJ13
NPJ13GY
NPJ13I
NPJ13W
Brass
Stainless Steel
SB13
SS13
Description
Color
Standard
1-Gang,
1-Toggle
Black
Brown
Gray
Ivory
White
NP1BK
NP1
NP1GY
NP1I
NP1W
1-Gang,
1-Duplex
Black
Brown
Gray
Ivory
White
1-Gang,
1-Decorator
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Communication Frames and Connectors
Hubbell Now Offers The Ability To Put 2 or 3 Communication Devices In a Single, Style Line® Plate
Any combination of phone (6-position jack), cable TV (F-type connector) and Category 5e modular data jacks can be
assembled onto a 2-port or 3-port frame—each sold individually so you can customize them as needed. Or the highly
popular phone and cable TV combination is available with the frame and matching wallplate under a single catalog number,
in all the popular colors.
Finally—a single communications plate that can take the place of 2 or 3 plates—available from a company you can trust for
superior quality.
Hubbell’s Marine communication frames and connectors deliver high quality data and multimedia transmission to the point
of connection. Hubbell’s 2 and 3 port Style Line® frames and leading edge connections allow for customized configurations.
Install Hubbell’s Marine communication offering and be assured a reliable connection.
2 Port Communication Frame, Fully Loaded (6-Position Phone Jack,
F-Type Cable TV Jack and Style Line® Plate Included)
Color
No. of Ports
Connection Type
Catalog Number
Ivory
White
2
2
USOC, F-Type
USOC, F-Type
NS783I
NS783W
Style Line® Frames, 2 Port and 3 Port Unloaded
Color
No. of Ports
Connection Type
Black
Gray
Ivory
White
2
2
2
2
–
–
–
–
NS612BK
NS612GY
NS612I
NS612W
Catalog Number
Black
Gray
Ivory
White
3
3
3
3
–
–
–
–
NS613BK
NS613GY
NS613I
NS613W
NS783I
Category 6 Modular Keystone Jacks
Color
Wiring
No. Positions
Catalog Number
Black
Gray
Ivory
White
T568A/T568B
T568A/T568B
T568A/T568B
T568A/T568B
8-Positions
8-Positions
8-Positions
8-Positions
NSJ6BK
NSJ6GY
NSJ6I
NSJ6W
NS612I
NS613I
Category 5e Modular Keystone Jacks
Color
Wiring
No. Positions
Catalog Number
Black
Gray
Ivory
White
T568A/T568B
T568A/T568B
T568A/T568B
T568A/T568B
8-Positions
8-Positions
8-Positions
8-Positions
NSJ5EBK
NSJ5EGY
NSJ5EI
NSJ5EW
NSJ6W
USOC Modular Keystone Jacks
Color
Wiring
No. Positions
Catalog Number
Black
Gray
Ivory
White
USOC
USOC
USOC
USOC
6-Positions
6-Positions
6-Positions
6-Positions
NSJUBK
NSJUGY
NSJUI
NSJUW
NSJ5EW
NSJUW
F-Type Connector Keystone
Color
Catalog Number
Black
Gray
Ivory
White
SFFGBK
SFFGGY
SFFGEI
SFFGW
www.hubbell-wiring.com
®
SFFGEI
Wiring Device-Kellems
Y-43
Marine Products
Enclosures only.
Boatyard Accessory Items
Non-Metallic While-In-Use Weatherproof Covers
• High-impact polycarbonate construction provides maximum durability
• Patented keyhole mounting system allows installation in under a minute
• Includes attached gasket and mounting hardware
• Pre-configured for GFCI with patented knockout technology for alternate devices
• Lockable tab
• NEMA 3R rated
• EXTRA DUTY® 5800 Series covers meet or exceed the extra duty rating
per UL 514D and are NEMA 3R rated
• 2017 NEC® Compliant (Article 406.9A & B)
• cULus Listed
1-Gang Weatherproof Covers for Vertical or Horizontal Mounting
RW57300
RW58300
Description
Standard
EXTRA DUTY®
Non-metallic, black (standard) or gray (extra duty) with clear
tinted cover, while-in-use, 16-in-1 configurations below.
RW57300
RW58300
Jumbo, non-metallic, black (standard) or gray (extra duty) with
clear tinted cover, while-in-use, 16-in-1 configurations below.
RW57350
RW58350
+
GFCI
RW57350
or
=
Adapters
(Included)
Duplex Switch 1 1/4" 1 3/8" 1 9/16" 1 3/4" 2 1/8"
& 1 5/8"
RW58350
Duplex
Switch
1 1/4"
1 3/8"
1 9/16"
& 1 5/8"
1 3/4"
2 1/8"
2-Gang Weatherproof Covers for Vertical or Horizontal Mounting
RW57750
Description
Standard
EXTRA DUTY®
Non-metallic, black (standard) or gray (extra duty) with clear
tinted cover, while-in-use, 55-in-1 configurations below
RW57750
RW58750
Note: Required by the NEC® for while-in-use outdoor power distribution. Thermoplastic covers provide protection for use in
wet locations with the cover closed, NEMA® 3R rated. Meets 2017 NEC 406.9 – receptacles in damp or wet locations.
Holes for padlocks are .40 inch.
RW58750
Multiple combinations of duplex, GFCI, switch, and rounds: 1 1/4", 1 3/8", 1 9/16", 1 5/8", 1 11/16", 2 1/8", 2 /4", 2 7/16"
Product Dimensions Inches (mm)
1-Gang
A
B
C
A
B
Dimensions in Inches (mm)
Y-44
C
Jumbo, 1-Gang
2-Gang
Standard
EXTRA DUTY® Standard
EXTRA DUTY® Standard
EXTRA DUTY®
5.54" (140.7)
3.79" (96.3)
3.07" (78.0)
5.90" (149.9)
4.18" (106.2)
3.00" (76.2)
5.92" (150.4)
4.20" (106.7)
5.10" (129.5)
5.54" (140.7)
5.43" (137.9)
3.07" (78.0)
5.54" (140.7)
3.79" (96.3)
5.08" (129.0)
5.54" (140.7)
5.43" (137.9)
3.07" (78.0)
NEC® is a registered trademark of the The National Electrical Code.
NEMA® is a registered trademark of The National Electrical Manufacturers Association.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Boatyard Accessory Items
Marine Grade Weatherproof Plates
Description
Color
Catalog Number
Thermoplastic vertical spring-loaded lift cover plate for weatherproofing
ground fault receptacles and decorator-type devices. Marine drip-proof
rated with stainless steel hardware. IP44 SUITABILITY.
Gray
Yellow
HBL5226
HBL52CM26
Same as above except for horizontal mounting.
Gray
Yellow
HBL5226H
HBL52CM26H
Valox® spring-loaded lift cover for weatherproofing duplex receptacles.
Stainless steel screws and neoprene gasket included for mounting to
FS/FD type weatherproof boxes. IP20 SUITABILITY.
Gray
Yellow
White
HBL5221
HBL52CM21
HBL52CM21W
Same as HBL52CM21 except for mounting to standard boxes.
Gray
Yellow
HBL5222
HBL52CM22
Valox spring-loaded lift cover for weatherproofing single straight blade
receptacles. Stainless steel screws and neoprene gasket included.
For mounting to FS/FD type weatherproof boxes. IP44 SUITABILITY.
Gray
Yellow
HBL7423WO
HBL74CM23WO
Valox spring-loaded lift cover for weatherproofing old style 26CM10
receptacle. Meets the most stringent requirements of UL’s three listing
categories for weatherproof plates. Stainless steel screws and neoprene
gasket included for mounting to FS/FD type weatherproof boxes.
IP44 SUITABILITY.
Gray
Yellow
HBL7424WO
HBL74CM24WO
Valox spring-loaded lift cover for weatherproofing HBL26CM10 receptacle.
Meets the most stringent requirements of UL’s three listing categories for
weatherproof plates. Stainless steel screws and neoprene gasket included
for mounting to FS/FD type weatherproof boxes. IP44 SUITABILITY.
Gray
Yellow
White
HBL7425WOA
HBL74CM25WOA
HBL74CM25WOAW
Valox lift cover for weatherproofing 50A receptacles. Meets requirements
of the most stringent of UL’s three listing categories for weatherproof plates.
Stainless steel screws and a neoprene gasket included. For mounting to
FS/FD type weatherproof boxes. IP44 SUITABILITY.
Gray
Yellow
HBL7774WO
HBL77CM74WO
HBL52CM26
HBL52CM21W
HBL52CM26H
Commercial Grade Weatherproof Plates
Available in a host of configurations—Twist-Lock® and straight blade receptacles in single or duplex as
well as switches—these plates are perfect for marine use. The PVC resists deterioration over time and
has high tensile and impact strength. Each plate comes with a tightly sealing, rubberized gasket and a
super strong lift cover spring.
Description
Catalog Number
Gray thermoplastic weatherproof lift cover for toggle switches (such as CS115).
For vertical mounting in standard or FS/FD type boxes.
HBL5201
Gray PVC weatherproof lift cover for duplex receptacles (such as HBL52CM62).
For vertical mounting in standard or FS/FD type boxes.
CWP8CR
Gray PVC weatherproof lift cover for ground fault receptacles (such as GF5252MGYA)
and Style Line® receptacles. For vertical mounting in standard or FS/FD type boxes.
CWP26CR
Same as CWP26CR except white in color.
CWP26CRW
HBL52CM21
HBL74CM23WO
CWP8CR
Valox®
CWP26CR
HBL5201
HBL77CM74WO
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-45
Marine Products
Boatyard Accessory Items
Marine Grade Dockside Boxes and Covers
30 cu. in. FD box made of high impact
thermoplastic material. Accepts
duplex and single receptacles
up to 50A Twist-Lock®.
HBL60CM83A
HBL60CM55
Housing Design
• 55° angle adapter (15 cu. in.)
• External mounting feet, accepts
#8 screw
• Stainless steel mounting/grounding
bracket
Housing Design
• ¾" NPT and 1" NPT threaded hub options
• 30 cu. in. FD box made of high impact
thermoplastic material
• External mounting feet, accepts
#10 screw
• Stainless steel mounting/grounding bracket
FD Boxes, Angled Adapters, Kits and Covers
HBL60CM83A
Boxes
Gray
White
Yellow
(2) ¾" NPT Hubs, FD Boxes
HBL6083
HBL60CM83WA
HBL60CM83A
(2) 1" NPT Hubs, FD Boxes
HBL6084
HBL60CM84WA
HBL60CM84A
HBL6055*
HBL60CM55W*
HBL60CM55*
(2) ¾" NPT Hubs, Box/Adapter Kits
HBL6083AK
HBL60CM83WAK
HBL60CM83AK
(2) 1" NPT Hubs, Box/Adapter Kits
HBL6084AK
HBL60CM84WAK
HBL60CM84AK
HBLP14FS
HBL60CM88W
HBL60CM88
Adapters*
55° Angle Adapters
Kits
HBLP14FS
Covers
Blank Cover Plates
HBL60CM88
Note: *Adapters are not UL Listed, nor UL Type 4X. For UL Type 4X rating, use receptacles in a FD box.
Marine Grade Dockside Boxes and Covers
PH6619
HBL6081
HBL6082
Y-46
Description
Catalog Number
Black phenolic type FS (shallow) weatherproof box has two ¾ in. (19.1) I.P.S. molded-in
knockouts. 4.56 in. H x 2.94 in. W x 2.19 in. D (115.9H x 74.6W x 55.6D) and has
16 cubic inch capacity.
HBL6080OS
Black non-metallic FS box with ¾ in. threaded hubs used for mounting phone and TV
outlets and PH6595 recreational vehicle inlet (see PH6621 for mounting box on recreational
vehicle). Cord connector included for strain relief and to maintain watertight integrity of box
when cable is used. PVC adapter also included for connection of PVC conduit to box.
PH6619
Black phenolic junction box with four ¾ in. (19.1) I.P.S. molded-in knock-outs.
Has 4.13 in. (104.8) diameter and is 1.88 in. (47.6) deep.
HBL6081
Phenolic blank cover, ¼ in. (6.4) thick, for HBL6081 box.
HBL6082
Black phenolic blank cover plate for HBL6080OS.
HBL6087
Yellow
Valox®
Valox®
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
HBL60CM88
blank cover plate for use with FS and FD type boxes.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Marine Products
Boatyard Accessory Items
Non-Metallic Vapor-tight Incandescent Fixtures
These non-metallic, vapor-tight incandescent fixtures offer long life and trouble-free lighting in
wet locations in marinas and on boats. Some features of these new units are:
• UV resistant, gray, glass filled thermoplastic polyester box, mounting adapters and globe
guards resists abuse and harmful effects of the elements
• Excellent temperature operating range of -40°F (-40°C) to +302°F (150°) for use in areas
with wide temperature variations or extreme ambient temperatures
• High temperature silicone gasketing maintains integrity and molded threads for ease of
installation/removal
NVX15GHGA
• Heat resistant glass globe withstands thermal shock in wet locations and has thread type
mounting to assure weathertight sealing
• High strength protective globe guard helps prevent accidental globe and lamp breakage
• Accommodates Type A incandescent lamps up to 150 watts
• UL 1598 Standard for luminaries
• UL 1598A Marine type luminaries
NVA15GHGA
Lighting and Lighting Fixtures
Description
Catalog Number
Ceiling mount non-metallic, vapor-tight incandescent luminaries including the fixture,
mounting box, guard and heat resistant glass globe. Accepts up to 150 watt Type A
incandescent lamp (not included).
NVX15GHGA
Pendant mount non-metallic, vapor-tight incandescent luminaries including fixture,
mounting cap, guard and heat resistant glass globe. Accepts up to 150 watt Type A
incandescent lamp (not included).
NVA15GHGA
Wall mount bracket only to adapt NVX15GHGA ceiling mount fixture to a wall mount fixture.
Order NVBA and NVX15GHGA to get wall mount fixture.
NVBA
Replacement guard to NVX15GHGA and NVA15GHGA.
NVGA
Heat resistant replacement globe for NVX15GHGA and NVA15GHGA.
Made of tempered glass.
VCGP100
NVBA
Nylon Watertight Strain Relief Cord Connectors
These Hubbell nylon cord connectors provide strain relief and a watertight seal where cable enters a piece
of equipment, panel, or box. A patented GOTCHA® ring, with a split and hinge design, allows for better
adjustment to the cord as the connector nut is tightened, providing superior cord gripping compared to other
types. A soft neoprene bushing compresses to keep liquids out and allows the nut to be easily tightened.
Description
Catalog Number
A gray male PVC adapter with ¾ in. NPT pipe thread for adapting PVC conduit to FS and FD
boxes with ¾ in. NPT hub (HBL6080, HBL6080OS, HBL60CM83). Not UL Listed.
HBL6085
Description
Straight nylon cord connector
NPT Hub Size
Diameter Range
Catalog Number
½ in.
.25–.38 in. (6.4–9.5)
HBL10CM22S
½ in.
.38–.50 in. (9.5–12.7)
HBL10CM23S
¾ in.
.38–.50 in. (9.5–12.7)
HBL10CM35S
¾ in.
.50–.63 in. (12.7–15.9)
HBL10CM36S
¾ in.
.63–.75 in. (15.9-19.1)
HBL10CM37S
1.0 in.
.63–.75 in. (15.9-19.1)
HBL10CM41S
VCGP100
HBL6085
HBL10CM22S
www.hubbell-wiring.com
®
Wiring Device-Kellems
Y-47
Marine Products
Electrical Standards
Codes and Specifications
ABYC Standard, July 2015, E-11 Excerpts.
11.4 DEFINITIONS – For the purposes of this standard, the following
definitions apply.
11.4.11 Equipment Leakage Circuit Interrupter (ELCI) - A residual current device
which detects equipment ground fault leakage current and disconnects all
current carrying conductors from the supply source at a preset trip threshold.
11.4.14 Ground fault circuit interrupter (GFCI) - A device intended for
the protection of personnel that functions to de-energize a circuit, or
portion thereof, within an established period of time when a current
to ground exceeds some predetermined value that is less than that
required to operate the overcurrent protective device of the supply
circuit.
11.4.34 Watertight - Constructed so that water will not enter the
enclosure under the test conditions specified in NEMA Standard 250,
Type 6P or IEC Standard 60529 Type IP67.
11.4.35 Weatherproof - Constructed or protected so that exposure to
the weather will not interfere with successful operation under the test
conditions specified in NEMA Standard 250, Type 3 or IEC Standard
60529 Type IP54.
11.13.1.3 Receptacles and matching plugs used on AC systems shall
not be interchangeable with receptacles and matching plugs used on
DC systems.
11.13.3.1 Receptacles shall be installed in boxes that meet the
requirements of UL 514A, Metallic Outlet Boxes, or 514C, Non-metallic
Outlet Boxes, Flush Device Boxes And Covers.
11.13.3.2 Receptacles shall be of the grounding type with a terminal
provided for the grounding (green) conductor as shown in Figure 11,
Figure 12 and Figure 13 of ABYC E-11.
11.13.3.3 Power wiring for receptacles shall be connected so that the
grounded (white) conductor attaches to the terminal identified by the
word "white" or a light color (normally white or silver). The ungrounded
conductor(s) shall be attached to the terminal(s) identified by a dark
color (normally brass or copper) and, optionally, the letters X, Y and Z
or L1, L2 and L3.
11.13.3.4 A branch circuit supplying a combination of receptacle
loads and permanently connected loads shall not supply permanently
connected loads in excess of the following:
11.11 GROUND FAULT PROTECTION — AC SYSTEMS
11.13.3.4.1 600 watts for a 15 ampere circuit.
11.11.1 An Equipment Leakage Circuit Interrupter (ELCI) or Type A
Residual Current Device (RCD) shall be installed with or in addition to
the main shore power disconnect circuit breaker(s) or at the additional
overcurrent protection as required by E-11.10.2.8.3 whichever is closer
to the shore power connection.
11.13.3.4.2 1000 watts for a 20 ampere circuit.
11.11.1.1 Trip level shall be a maximum of 30mA. The trip time shall
be a maximum of 100ms.
11.11.1.4 The ELCI shall be readily accessible.
Note: A ground fault circuit interrupter (GFCI) may be used on single phase
AC circuits to provide additional protection for personnel and equipment.
11.11.5 GFCI receptacle devices shall meet the requirements of
Underwriters Laboratories' standard UL 943, Ground Fault Circuit
Interrupters and the requirements of UL 498, Electrical Attachment
Plugs and Receptacles.
Note: GFCI receptacle devices may be installed as part of a convenience
outlet installation either in single outlet applications or in multiple feed
through installations. (See E-11.13.3.5)
11.12 SWITCHES
11.12.1.1 Switches shall have voltage ratings not less than the system
voltage, current ratings not less than the connected load and shall be
rated for the type of load, i.e., inductive or resistive.
11.12.3.1 Switches used in branch circuits shall simultaneously open
all ungrounded conductor(s) of the branch circuit.
11.13 PLUGS AND RECEPTACLES
11.13.1.1 Receptacles shall be installed in locations not normally
subject to rain, spray, or flooding but if receptacles are used in
such areas the following shall apply:
11.13.1.1.1 Receptacles installed in locations subject to rain,
spray, or splash shall be weatherproof when not in use.
Note: Weatherproofing may be provided by means such as spring-loaded,
self-closing, or snap type receptacle covers.
11.13.1.1.2 Receptacles installed in areas subject to flooding or
momentary submersion shall be of a watertight design as may be
provided by a threaded, gasketed cover.
Y-48
®
11.13.3.5 If installed in a head, galley, machinery space, or on a
weather deck, the receptacle shall be protected by a Type A (nominal
5 milliamperes) Ground Fault Circuit Interrupter (GFCI). (See E-11.11.)
Note: GFCI receptacle devices are not necessarily ignition protected per E-11.5.1.4.
11.6.2.2 SHORE POWER
11.6.2.2.2.1 Power Inlet - The receptacle, or receptacles, installed to
receive a connecting cable to carry AC shore power aboard shall be
a male type connector.
11.6.2.2.2.2 Power inlets installed in locations subject to rain, spray,
or splash shall be weatherproof whether or not in use.
11.6.2.2.2.2.1 Power inlets installed in areas subject to flooding or
momentary submersion shall be watertight whether or not in use.
11.6.2.2.2.3 Metallic power inlets installed on metallic or carbon fiber
reinforced boats using an isolation transformer or a galvanic isolator
shall be insulated from metallic structure and components. On nonmetallic boats using an isolation transformer or a galvanic isolator the
power inlet shall be insulated from metallic components connected to
the boat's ground.
11.6.2.2.1.1 Shore Power Cable – On each boat equipped with an AC
shore power system, a shore power cable that contains the conductors
for the power circuit and a grounding (green) conductor shall be
provided.
11.6.2.2.1.2 Except where the shore power cable is permanently
connected to the boat, the boat end of this cable shall be terminated
with a locking and grounding female type connector to match the boat
power inlet. (See Figure 12 and Figure 13 of ABYC E-11).
11.6.2.2.1.3 The shore power cable shall be flexible cord with the
minimum properties of Type SOW, STW, STOW, SEOW, or STOOW
and shall be suitable for outdoor use. The shore connection end of
this cable shall be fitted with a locking and grounding type plug with
the required number of poles and shall comply with Article 555 of the
National Electrical Code. (See Figure 13 and Table VII-A of ABYC E-11).
EXCEPTION: Pin and sleeve devices in accordance with Figure 14 of ABYC E-11.
Wiring Device-Kellems
www.hubbell-wiring.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement