Installation
Guide
hp StorageWorks
NAS 1200s
Product Version: 1.0
First Edition (September 2003)
Part Number: 351698–001
This installation guide provides information about how to deploy the
HP StorageWorks NAS 1200s.
© Copyright 2003 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and fitness for a
particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
This document contains proprietary information, which is protected by copyright. No
part of this document may be photocopied, reproduced, or translated into another
language without the prior written consent of Hewlett-Packard. The information
contained in this document is subject to change without notice.
Microsoft®, MS-DOS®, MS Windows®, Windows®, and Windows NT® are U.S.
registered trademarks of Microsoft Corporation.
Intel® and Pentium® and the Intel Inside logo are trademarks or registered trademarks
of Intel Corporation or its subsidiaries in the United States and other countries.
Hewlett-Packard Company shall not be liable for technical or editorial errors or
omissions contained herein. The information is provided “as is” without warranty of any
kind and is subject to change without notice. The warranties for Hewlett-Packard
Company products are set forth in the express limited warranty statements for such
products. Nothing herein should be construed as constituting an additional warranty.
Printed in the U.S.A.
NAS 1200s Installation Guide
First Edition (September 2003)
Part Number: 351698–001
Contents
Contents
About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Text Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Equipment Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Rack Stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HP Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HP Storage Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HP Authorized Reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
1
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Configuration Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Product Definition and Information . . . . . . . . . . . . . . . . . . . . . . . . .14
Server Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Managing the NAS 1200s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Product Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Dependencies and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Storage Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
IP Networking and Setup Requirements. . . . . . . . . . . . . . . . . . .18
Deploying the NAS 1200s on the Network. . . . . . . . . . . . . . . . . . . .18
Setup and Configuration Overview. . . . . . . . . . . . . . . . . . . . . . . . . .20
Configuring the NAS 1200s . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Storage Management Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Storage Management Elements . . . . . . . . . . . . . . . . . . . . . . . . .21
NAS 1200s Installation Guide
3
Logical Storage Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
File System Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
File-Sharing Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
2
Configuration Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Preinitialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Collect Information for Configuration . . . . . . . . . . . . . . . . . . . . . . .24
Configuration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
WebUI Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
RapidLaunch Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Remote Browser Method (using Hostname) . . . . . . . . . . . . . . .29
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Direct Attach Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Rapid Startup Wizard Configuration . . . . . . . . . . . . . . . . . . . . .32
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Configure Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Creating a Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Creating File Shares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Basic Setup Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Completing the System Configuration . . . . . . . . . . . . . . . . . . . .36
A Regulatory Compliance Notices . . . . . . . . . . . . . . . . . . . . . . . 37
Federal Communications Commission Notice . . . . . . . . . . . . . . . . .37
Class A Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Class B Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Declaration of Conformity for products marked with the FCC logo
- United States only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Canadian Notice (Avis Canadien). . . . . . . . . . . . . . . . . . . . . . . . . . .40
Class A Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Class B Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
European Union Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
BSMI Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
4
NAS 1200s Installation Guide
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Battery Replacement Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
B
Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Grounding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
NAS 1200s Installation Guide
5
6
NAS 1200s Installation Guide
About This
Guide
About this Guide
This installation guide provides information to help you deploy
the HP StorageWorks NAS 1200s.
About this Guide
“About this Guide” topics include:
■
Overview, page 7
■
Conventions, page 8
■
Rack Stability, page 11
■
Getting Help, page 11
Overview
This section covers the following topics:
■
Intended Audience
■
Prerequisites
■
Related Documentation
Intended Audience
This book is intended for use by technical professionals who are
experienced with the following:
■
Microsoft® administrative procedures
■
file-sharing protocols
Prerequisites
Before you set up the NAS 1200s, HP recommends that you
obtain supplemental documentation relative to the items listed
above in the section titled “Intended Audience.”
NAS 1200s Installation Guide
7
Related Documentation
In addition to this guide, HP provides corresponding information:
■
HP StorageWorks NAS 1200s Administration Guide
■
HP StorageWorks NAS 1200s Quick Reference and Rack
Installation Poster
■
HP StorageWorks NAS 1200s Release Notes
Conventions
Conventions consist of the following:
■
Document Conventions
■
Text Symbols
■
Equipment Symbols
Document Conventions
The document conventions included in Table 1 apply in most
cases.
Table 1: Document Conventions
Element
8
Convention
Cross-reference links
Figure 1
Key and field names, menu items,
buttons, and dialog box titles
Bold
File names, application names, and
text emphasis
Italics
User input, command and directory
names, and system responses
(output and messages)
Monospace font
COMMAND NAMES are uppercase
monospace font unless they are case
sensitive
Variables
<monospace, italic font>
Website addresses
Underlined sans serif font text:
http://www.hp.com
NAS 1200s Installation Guide
Text Symbols
The following symbols may be found in the text of this guide.
They have the following meanings:
WARNING: Text set off in this manner indicates that failure
to follow directions in the warning could result in bodily harm
or death.
Caution: Text set off in this manner indicates that failure to
follow directions could result in damage to equipment or
data.
Note: Text set off in this manner presents commentary, sidelights, or
interesting points of information.
Equipment Symbols
The following equipment symbols may be found on hardware for
which this guide pertains. They have the following meanings:
Any enclosed surface or area of the equipment
marked with these symbols indicates the presence of
electrical shock hazards. Enclosed area contains no
operator serviceable parts.
WARNING: To reduce the risk of personal injury from
electrical shock hazards, do not open this enclosure.
NAS 1200s Installation Guide
9
Any RJ-45 receptacle marked with these symbols
indicates a network interface connection.
WARNING: To reduce the risk of electrical shock, fire,
or damage to the equipment, do not plug telephone
or telecommunications connectors into this receptacle.
Any surface or area of the equipment marked with
these symbols indicates the presence of a hot surface
or hot component. Contact with this surface could
result in injury.
WARNING: To reduce the risk of personal injury from
a hot component, allow the surface to cool before
touching.
Power supplies or systems marked with these
symbols indicate the presence of multiple
sources of power.
WARNING: To reduce the risk of personal
injury from electrical shock, remove all power
cords to completely disconnect power from the
power supplies and systems.
Any product or assembly marked with these symbols
indicates that the component exceeds the
recommended weight for one individual to handle
safely.
WARNING: To reduce the risk of personal injury or
damage to the equipment, observe local occupational
health and safety requirements and guidelines for
manually handling material.
10
NAS 1200s Installation Guide
Rack Stability
Rack stability protects personnel and equipment.
WARNING: To reduce the risk of personal injury or damage
to the equipment, be sure that:
■ The leveling jacks are extended to the floor.
■ The full weight of the rack rests on the leveling jacks.
■ In single rack installations, the stabilizing feet are
attached to the rack.
■ In multiple rack installations, the racks are coupled.
■ Only one rack component is extended at any time. A rack
may become unstable if more than one rack component
is extended for any reason.
Getting Help
If you still have a question after reading this guide, contact an HP
authorized service provider or access our website:
http://www.hp.com.
NAS 1200s Installation Guide
11
HP Technical Support
Telephone numbers for worldwide technical support are listed on
the following HP website: http://www.hp.com/support/. From
this website, select the country of origin.
Note: For continuous quality improvement, calls may be recorded or
monitored.
Be sure to have the following information available before
calling:
■
Technical support registration number (if applicable)
■
Product serial numbers
■
Product model names and numbers
■
Applicable error messages
■
Operating system type and revision level
■
Detailed, specific questions
HP Storage Website
The HP website has the latest information on this product, as well
as the latest drivers. Access storage at: http://www.hp.com/
country/us/eng/prodserv/storage.html. From this website, select
the appropriate product or solution.
HP Authorized Reseller
For the name of your nearest HP authorized reseller:
12
■
In the United States, call 1-800-345-1518
■
In Canada, call 1-800-263-5868
■
Elsewhere, see the HP website for locations and telephone
numbers: http://www.hp.com.
NAS 1200s Installation Guide
Product Overview
1
This chapter describes the configuration options and setup and
configuration dependencies and requirements for the HP
StorageWorks NAS 1200s.
Configuration Options
The NAS 1200s is specifically designed for file serving; it offers
optimized performance for a growing environment.
The NAS 1200s is available in three models:
■
1 TB
■
640 GB
■
320 GB
NAS 1200s Installation Guide
13
Product Definition and Information
The NAS 1200s is a remote office or small to medium business
class NAS solution that provides reliable performance,
manageability, and fault tolerance.
Server Hardware Features
The following features are included in the NAS 1200s Model 1
server:
■
Intel® Pentium® 4 2.4 GHz processor
■
512-MB 200 MHz PC2100 DDR SDRAM memory
■
64-bit PCI-X slot
■
64-bit PCI slot
■
Four 80GB 7200 rpm hot-pluggable hard drives
■
■
Τwo embedded 10/100/1000 WOL (Wake on LAN) network
interface controllers (NICs)
SCSI Controller for tape backup
The following features are included in the NAS 1200s Model 2
server:
14
■
Intel Pentium 4 2.8 GHz processor
■
512-MB 200 MHz PC2100 DDR SDRAM memory
■
64-bit PCI-X slot
■
64-bit PCI slot
■
Four 160GB 7200 rpm hot-pluggable hard drives
■
Two embedded 10/100/1000 WOL (Wake on LAN) network
interface controllers (NICs)
■
SCSI Controller for tape backup
NAS 1200s Installation Guide
The following features are included in the NAS 1200s Model 3
server:
■
Intel Pentium 4 2.8 GHz processor
■
512-MB 200 MHz PC2100 DDR SDRAM memory
■
64-bit PCI-X slot
■
64-bit PCI slot
■
Four 250GB 7200 rpm hot-pluggable hard drives
■
Two embedded 10/100/1000 WOL (Wake on LAN) network
interface controllers (NICs)
■
SCSI Controller for tape backup
Software Features
Advanced features included and supported by the NAS 1200s
include:
■
Microsoft Services for Macintosh
■
Microsoft Services for NetWare
■
Microsoft NFS
■
NAS Web Based User Interface (WebUI)
■
Windows® Storage Server 2003
■
Shadow Copies for shared folders
■
Storage Manager
■
Optional third party supported software (not included):
— Backup software
— Management software
— Quota management
— Virus protection
For specific software product recommendations, go to the HP
website:
http://h18000.www1.hp.com/products/storageworks/nas/support
edsoftware.html
NAS 1200s Installation Guide
15
Managing the NAS 1200s
The NAS 1200s is configured at the factory with default system
settings and with the NAS operating system installed. Refer to the
“Storage Management Overview” section later in this chapter for
more information.
The NAS administrator uses Windows Disk Manager (DM) to
manage the logical storage.
Figure 1: NAS 1200s device
16
NAS 1200s Installation Guide
Product Redundancy
The NAS 1200s is specifically designed to perform file serving
tasks for networks, using industry standard components to ensure
reliability.
Other industry standard features, such as redundant array of
independent drives (RAID) and remote manageability, further
enhance the overall dependability of the NAS 1200s.
To ensure redundancy and reliability, the hard drives installed in
the NAS 1200s are configured so that a single drive failure will
not cause data loss or system failure. The NAS 1200s is
configured with dual boot capibility. When powered on, the NAS
1200s can boot using a primary OS or a secondary recovery OS.
The primary OS resides on drive 0 and is mirrored on drive 1
while the secondary OS resides on drive 2 and is mirrored on
drive 3. If the primary OS becomes corrupted and un-bootable,
the secondary OS is available for data backup prior to using the
Quick Restore DVD to restore the system to the factory default
state.
The data volume is configured as a RAID 5 volume across all
four drives. This ensures redundancy in the event of a drive
failure and the data volume is accessible by both the primary OS
and secondary OS.
NAS 1200s Installation Guide
17
Dependencies and Requirements
Specific conditions must be met in order for the NAS 1200s to
operate.
Storage Requirements
To protect against data loss from hard drive failure, configure
storage with fault tolerance in mind. HP recommends adhering to
RAID5 configurations.
IP Networking and Setup Requirements
The following are IP networking and setup requirements needed
for a NAS 1200s device:
■
Windows-based PC running Microsoft Internet Explorer 5.5
(or later) on the same network segment as the NAS 1200s;
this will be used to set up and administer the NAS device.
■
Additional Ethernet connection ports to client subnets
(depending on network options ordered).
Deploying the NAS 1200s on the Network
The default shipping configuration contains two 10/100/1000
integrated network interface controller (NIC) ports for client data
access. These data ports also allow access to the Web user
interface (WebUI) that accompanies the product. Most
management and administrative procedures can be accomplished
via the WebUI.
18
NAS 1200s Installation Guide
1
2
3
10
9
4
5
8
7
6
Figure 2: Rear panel connectors
Table 2: Rear Panel Connectors
Item
Description
1
Power connectors
2
Mouse connector (PS/2) (green)
3
Video connector (blue)
4
Serial connector (teal)
5
PCI expansion slot
6
LVD SCSI Controller connector
7
RJ-45 connector for NIC 1 (Eth0)
8
RJ-45 connector for NIC 1 (Eth1)
9
USB connectors (2) (black)
-
Keyboard connector (PS/2) (purple)
NAS 1200s Installation Guide
19
Setup and Configuration Overview
Setting up systems is a well-defined process. This section is
intended as an overview of the process, not a detailed list of
step-by-step instructions. Step-by-step procedures are
documented in the administration guide. Some of the steps are
driven by wizards within the WebUI. In either type of setup, it is
important to read all of the supplied documentation before
starting. Relevant documents include:
■
HP StorageWorks NAS 1200s Administration Guide
■
HP StorageWorks NAS 1200s Rack Installation Instructions
■
HP StorageWorks NAS 1200s Release Notes (if required, this
document will be available via www.hp.com)
Configuring the NAS 1200s
The following describes how to configure the NAS 1200s.
1. Configure the NAS device using Chapter 2 of this guide.
2. This is a recommended step. Place the NAS device into an
Active Directory or Windows NT® 4.0 domain for ease of
manageability.
3. Configure the NAS 1200s device using Chapter 3 of this
guide.
4. This is an optional step. Using Disk Manager (DM), assign
drive letters or mount points, and format the data drives. See
the DM online help for full details on this procedure.
5. This is an optional step. Enable protocols such as NFS
sharing, NCP, and/or AppleTalk. See the administration guide
for this procedure in detail.
6. This is an optional step. Create shares corresponding to the
protocols mentioned in the previous steps. Grant access rights
to the shares.
7. Read the remaining sections of the administration guide.
Note: By default the data drive (F:) is configured and ready for use.
20
NAS 1200s Installation Guide
Storage Management Overview
This section provides an overview of the components that make
up the NAS storage structure. A complete discussion of the
components and their relationships is available in the
administration guide.
Caution: This section on storage management and Windows
DM is required reading material for the NAS administrator.
This section develops the concepts and requirements that
serve as the basis for successfully using an HP StorageWorks
NAS device. Failure to read this section and the appropriate
sections on storage management in the administration guide
may lead to data loss or file corruption.
Storage Management Elements
Storage is divided into three major divisions:
■
Logical storage elements
■
File system elements
■
File sharing elements
Each of these elements is composed of the previous level’s
elements.
Logical Storage Elements
The NAS 1200s uses the Microsoft Disk Manager (DM) for
managing the various types of disk presented to the file system.
Disk Manager has two types of disk presentations: basic disk and
dynamic disk. Each of these types of disk has special features that
enable different types of management. The NAS 1200s uses a
dynamic RAID5 volume to ensure maximum data protection.
NAS 1200s Installation Guide
21
File System Elements
File system elements are composed of the folders and subfolders
that are created under each logical storage element (partitions,
logical disks, and volumes). Folders are used to further subdivide
the available file system providing another level of granularity for
management of the information space. Each of these folders can
contain separate permissions and share names that can be used for
network access. Folders can be created for individual users,
groups, projects, etc. Refer to the administration guide for more
details on file system elements.
File-Sharing Elements
The NAS 1200s supports several file-sharing protocols, including
DFS, NFS, FTP, HTTP, and Microsoft SMB. On each folder or
logical storage element, different file-sharing protocols can be
enabled using specific network names for access across a network
to a variety of clients. Permissions can then be granted to those
shares based on users or groups of users in each of the file sharing
protocols. Refer to the administration guide for more details on
file system elements.
22
NAS 1200s Installation Guide
Configuration Setup
2
This chapter provides information about preinitialization,
collecting information, and configuring the HP StorageWorks
NAS 1200s using the online method. Details include three
methods of system configuration and an overview of storage
configuration.
Preinitialization
Before beginning the installation process, verify that the
hardware installation is complete. Verify that the NAS 1200s is
completely installed in the rack and that all cables and cords are
connected.
Note: If you need assistance with rack installation or hardware
connections, refer to the quick reference and rack installation guide
included in the shipping carton.
NAS 1200s Installation Guide
23
Collect Information for Configuration
Choose a host name and collect general information before
initializing the NAS 1200s.
Configuration Information
Collect the general information required to initialize the NAS
device for both dynamic host configuration protocols (DHCP)
and non-DHCP configurations. You will be asked for this
information during configuration, as shown in Table 3. Become
familiar with this information before attempting to configure the
NAS device.
Table 3: Configuration Information
Part A: To Be completed for DHCP and non-DHCP
configurations
Server Host Name:
Part B: To be completed for non-DHCP configurations only
DNS Servers
IP Address
1
2
3
NAS NIC Port*
IP Address
Subnet
Mask
Gateway
Address
NIC 1
NIC 2
* The default NAS 1200s has two Ethernet ports available for network
connectivity. Disable ports that will not be used. Each Ethernet port must be
configured with a separate subnet.
Part C: SNMP Information (optional)
Trap Destination (IP
Address) Manager
Client:
Management Traps
Community String:
System Management
Community String:
24
NAS 1200s Installation Guide
WebUI Configuration
The WebUI is designed to be a graphical, easy-to-use application
that gathers the necessary information for configuration. The
WebUI may be accessed through three methods:
■
RapidLaunch method
■
Remote Browser method (using hostname)
■
Direct Attach method
Note: You can configure this system through the WebUI or manually
through Remote Desktop or Windows Storage Server 2003 Desktop.
Note: The NAS 1200s is designed to be deployed without a monitor,
keyboard, and mouse. These ports are available and supported by
the NAS device, if used.
RapidLaunch Method
The NAS 1200s includes a RapidLaunch CD that can run on any
Windows-based PC using Internet Explorer 5.5 (or later).
Requirements
The following items are required to run the WebUI configuration
application:
■
Windows-based PC loaded with Internet Explorer 5.5 (or
later) on the same network segment as the NAS 1200s
■
RapidLaunch CD
NAS 1200s Installation Guide
25
Procedure
To initialize the NAS 1200s:
Caution: Do not power up the NAS device until steps 1
through 5 are completed.
1. Connect the Ethernet cables to the respective network ports
of the NAS 1200s and the corresponding network segments.
See Figure 2 and Table 2 on page 19 for the locations of the
network ports on the NAS 1200s.
Note: Connect a loopback cable to any of the NAS 1200s Ethernet
ports that are not configured for use.
2. Verify that the Windows-based PC client is connected to the
same subnet as the NAS 1200s.
3. Power on the PC and wait until the operating system has
completely loaded.
4. Insert the RapidLaunch CD into the CD-ROM drive of the
PC.
5. The RapidLaunch CD should run automatically. If the
program does not start up automatically, the program may be
run manually. Click Start, select Run on the Windows
taskbar, and then type the following:
{CD ROM drive}:\setup.exe
Wait for the interface to start.
6. Go to the NAS device and power it on. It will be several
minutes before the NAS device is accessible on the network.
7. Return to the PC. Select StorageWorks NAS from the Show
drop-down list to have RapidLaunch list all NAS devices on
the network, as shown in Figure 3.
26
NAS 1200s Installation Guide
Figure 3: RapidLaunch search screen
8. All the NAS devices found on the network are displayed as
shown in Figure 4. It may take several minutes for the NAS
device to be found on the network.
Note: The RapidLaunch utility will refresh periodically, looking for
new devices on the network. Refresh the device list manually by
selecting the Refresh button.
NAS 1200s Installation Guide
27
Figure 4: RapidLaunch device discovery screen
9. Select the unconfigured HP StorageWorks NAS 1200s device
from the device list. If more than one displays, check the
serial number in the System Name column by clicking the
appropriate cell.
10. Login to the WebUI. This launches the WebUI configuration
application (Rapid Startup) on the target HP StorageWorks
NAS device, as shown in Figure 6.
Note: The default login for the WebUI is administrator and the
password is hpinvent. The WebUI uses the same login as the local
administrator's account or an account with administrative privileges.
11. Go to the “Rapid Startup Wizard Configuration” on page 32
to complete the setup procedures.
28
NAS 1200s Installation Guide
Remote Browser Method (using Hostname)
The NAS 1200s ships with DHCP enabled on the network port. If
the system is placed on a DHCP enabled network and the serial
number of the device is known, it can be accessed through a client
running Internet Explorer 5.5 (or later) on that network, using the
3202 port of the device. The serial number is located below the
power source on the back of the NAS 1200s, as illustrated in
Figure 5.
Figure 5: Serial number location
Requirements
The following items are required to run the WebUI configuration
application:
■
Windows-based PC loaded with Internet Explorer 5.5 (or
later) on the same segment as the NAS 1200s
■
DHCP-enabled network
■
Serial number of the NAS 1200s
Procedure
To initialize the NAS 1200s:
1. Connect the Ethernet cables to the respective network ports
of the NAS 1200s and the corresponding network segments.
See Figure 2 and Table 2 on page 19 for the locations of the
network ports on the NAS 1200s.
NAS 1200s Installation Guide
29
2. Go to the NAS device and power it on. It will be several
minutes before the NAS device is accessible on the network.
Note: The NAS device will respond when the NAS operating system
has started.
3. Open Internet Explorer on the PC. Enter https://, the
serial number of the NAS 1200s followed by a hyphen (-),
and then :3202. Press Enter.
Example: https://D4059ABC3433-:3202
Note: Substitute the server name for the serial number if a server
name was previously set.
4. Login to the WebUI. This launches the WebUI configuration
application (Rapid Startup) on the target HP StorageWorks
NAS device, as shown in Figure 6.
Note: The default login for the WebUI is administrator and the
password is hpinvent. The WebUI uses the same login as the local
administrator's account or an account with administrative privileges.
5. Go to the next section, “Rapid Startup Wizard
Configuration,” to complete the setup procedures.
30
NAS 1200s Installation Guide
Direct Attach Method
You can access the WebUI using a monitor, mouse, and keyboard
directly attached to the NAS 1200s.
Procedure
To initialize the NAS 1200s:
1. Connect the Ethernet cables to the respective network ports
of the NAS 1200s and the corresponding network segments.
2. Connect the monitor, mouse, and keyboard directly to the rear
panel connectors of the NAS 1200s. See Figure 2 and Table 2
on page 19 for the locations of the connectors on the NAS
1200s.
3. Open Internet Explorer to launch the WebUI configuration
application (Rapid Startup) on the target StorageWorks NAS
device, as shown in Figure 6. If the WebUI does not launch
connect to the LocalHost and login to the WebUI.
Note: The default login for the WebUI is administrator and the
password is hpinvent. The WebUI uses the same login as the local
administrator's account or an account with administrative privileges.
4. Go to the “Rapid Startup Wizard Configuration” on page 32
to complete the setup procedures.
NAS 1200s Installation Guide
31
Rapid Startup Wizard Configuration
This utility will guide you through the configuration process.
Requirements
Ensure that an Internet Explorer window has been opened and the
WebUI is at the Rapid Startup Wizard as shown in Figure 6.
Figure 6: Rapid Startup wizard screen
Note: The Rapid Startup Wizard will be the default page unless you
complete the wizard or select the checkbox next to the text that reads,
"Do not show this wizard as the default page."
32
NAS 1200s Installation Guide
Procedure
Using the information from Table 3, fill in the screens that follow.
1. Select Next to start the Rapid Startup Wizard (There may be
a slight pause because the wizard is gathering information
about the system and populating the fields.)
2. Configure the Date and Time Settings. Select Next to
continue.
3. Configure the Administrator Account settings. Select Next to
continue.
4. Configure the Alert Email settings. Select Next to continue.
5. Configure the SNMP Settings. Select Next to continue.
6. Configure the Network Interface Information for both NICs.
Select Next to continue.
7. Configure the System Information. Select Next to continue.
8. Verify that your information is correct when the configuration
review screen is displayed as shown in Figure 7.
Figure 7: Rapid Startup configuration review screen
9. Click Finish to exit Rapid Startup. If a reboot is required,
Rapid Startup displays a message that a reboot is occurring
and the configuration information will be set.
NAS 1200s Installation Guide
33
The browser will return to the status page. The refresh may
take several minutes if the device was restarted.
Note: Once the Rapid Startup Wizard has been completed the
Welcome page will become the default page.
Configure Storage
Physical disks can be arranged as RAID arrays for fault tolerance
and enhanced performance, then segmented into logical disks of
appropriate sizes for particular storage needs. These logical disks
then become the volumes that appear as drives on the NAS server.
Note: The Data Volume is configured by default as a RAID-5 volume
across all four disks and is formatted as NFTS with a 16K allocation
unit size.
Creating a Volume
To create a Volume on unused disk space:
1. Click the Disks tab and select Volumes.
2. Select the Manage... in the Task section.
3. Log in to the Remote Desktop session as an administrator.
4. Right-click in the unallocated space.
5. Select New Volume from the menu.
6. Use the New Volume Wizard to create a new volume, format a
filesystem, and mount the volume on a drive letter or
subdirectory of another mounted volume.
Note: For detailed information on creating volumes such as the types
of volumes available, and the advantages of basic and dynamic
disks, see the help feature in the Disks Management interface.
34
NAS 1200s Installation Guide
Creating File Shares
Once the storage space is set up, file shares are created by
selecting an entire volume or a particular folder on a volume and
designating that space as a network volume. That space is then
available to groups of client computers on the network. The client
computers access this space through a variety of file sharing
protocols using the disk space to store their files and folders.
1. Click the Shares tab and select Shares.
2. Click Folders to create a new folder on the previously created
volumes, or use an existing folder.
a. Select a volume and click Manage Folders > New...
b. Type the folder name and click OK.
3. Click Shares to create a file share by designating a network
share name and folder location.
a. Click New and type a name and a path.
Note: Check Create Folder if the directory does not exist.
b. Set client types to designate the types of client computers
that should be allowed access to the share.
c. Click the appropriate Client Sharing from the General list
to set user and group permissions on the share.
NAS 1200s Installation Guide
35
Basic Setup Complete
This completes the basic configuration of the HP StorageWorks
NAS system, however, some computing environments may
require additional settings and configuration as noted below.
Completing the System Configuration
Most of these tasks can be completed using the HP StorageWorks
NAS WebUI. All procedures for the configuration tasks may be
found in the HP StorageWorks NAS 1200s Administration Guide.
36
■
Configure shadow copies for creating point-in-time snapshots
of data volumes.
■
Configure data replication software via Microsoft File
Replication Services.
■
Place the NAS system in a domain (highly recommended).
■
Enable and establish space usage quotas.
■
Configure DFS (Distributed File System) or publish the NAS
system's shares into an already existing DFS structure.
■
Enable additional protocols and create the associated file
shares.
■
Adjust logging for system, application, and security events.
■
Install additional 3rd party software, such as backup,
anti-virus, or monitoring agents.
■
Configure UNIX user and group mappings.
■
Create and verify a full NAS system backup before putting
the system into production.
NAS 1200s Installation Guide
Regulatory
Compliance Notices
A
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules
and Regulations has established Radio Frequency (RF) emission
limits to provide an interference-free radio frequency spectrum.
Many electronic devices, including computers, generate RF
energy incidental to their intended function and are, therefore,
covered by these rules. These rules place computers and related
peripheral devices into two classes, A and B, depending upon
their intended installation. Class A devices are those that may
reasonably be expected to be installed in a business or
commercial environment. Class B devices are those that may
reasonably be expected to be installed in a residential
environment (personal computers, for example). The FCC
requires devices in both classes to bear a label indicating the
interference potential of the device as well as additional operating
instructions for the user.
The rating label on the device shows which class (A or B) the
equipment falls into. Class B devices have an FCC logo or FCC
ID on the label. Class A devices do not have an FCC logo or FCC
ID on the label. Once the class of the device is determined, refer
to the following corresponding statement.
NAS 1200s Installation Guide
37
Class A Equipment
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at personal expense.
Class B Equipment
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
38
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
■
Consult the dealer or an experienced radio or television
technician for help.
NAS 1200s Installation Guide
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved
by Hewlett-Packard Company may void the user's authority to
operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods in order to maintain
compliance with FCC Rules and Regulations.
Declaration of Conformity for products marked with
the FCC logo - United States only
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
For questions regarding your product, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call
1-800- 652-6672
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call
(281) 514-3333
To identify this product, refer to the Part, Series, or Model
number found on the product.
NAS 1200s Installation Guide
39
Canadian Notice (Avis Canadien)
Class A Equipment
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
Class B Equipment
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
European Union Notice
Products bearing the CE marking comply with the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued
by the Commission of the European Community and if this
product has telecommunication functionality, the R&TTE
Directive (1999/5/EC).
Compliance with these directives implies conformity to the
following European Norms (in parentheses are the equivalent
international standards and regulations):
40
■
EN 55022 (CISPR 22) - Electromagnetic Interference
■
EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) - Electromagnetic
Immunity
■
EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics
■
EN61000-3-3 (IEC61000-3-3) - Power Line Flicker
■
EN 60950 (IEC 60950) - Product Safety
NAS 1200s Installation Guide
BSMI Notice
Japanese Notice
NAS 1200s Installation Guide
41
Battery Replacement Notice
The battery-backed write cache uses a nickel metal hydride
(NiMH) battery pack.
WARNING: There is a risk of exlposion, fire, or personal
injury if the battery pack is not properly handled. To reduce
this risk:
■ Do not attempt to recharge the batteries if they are
disconnected from the controller.
■ Do not expose the battery pack to water, or to
temperatures higher than 60ºC (140ºF).
■ Do not abuse, disassemble, crush, or puncture the battery
pack.
■ Do not short the external contacts.
■ Replace the battery pack only with the designated HP
spare.
Battery disposal should comply with local regulations.
Batteries, battery packs, and accumulators should not be
disposed of together with the general household waste. To
forward them to recycling or proper disposal, use the public
collection system or return them by established parts return
methods to HP, an authorized HP Partner, or one of their
agents.
For more information about battery replacement or proper
disposal, contact an authorized reseller or an authorized service
provider.
42
NAS 1200s Installation Guide
Electrostatic
Discharge
B
To prevent damage to the system, be aware of the precautions you
need to follow when setting up the system or handling parts. A
discharge of static electricity from a finger or other conductor
may damage system boards or other static-sensitive devices. This
type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following
precautions:
■
Avoid hand contact by transporting and storing products in
static-safe containers.
■
Keep electrostatic-sensitive parts in their containers until they
arrive at static-free workstations.
■
Place parts on a grounded surface before removing them from
their containers.
■
Avoid touching pins, leads, or circuitry.
■
Always be properly grounded when touching a
static-sensitive component or assembly.
NAS 1200s Installation Guide
43
Grounding Methods
There are several methods for grounding. Use one or more of the
following methods when handling or installing
electrostatic-sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible
straps with a minimum of 1 megohm ± 10 percent resistance
in the ground cords. To provide proper grounding, wear the
strap snug against the skin.
■
Use heel straps, toe straps, or boot straps at standing
workstations. Wear the straps on both feet when standing on
conductive floors or dissipating floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding
static-dissipating work mat.
If you do not have any of the suggested equipment for proper
grounding, have an authorized reseller install the part.
Note: For more information on static electricity, or for assistance with
product installation, contact your authorized reseller.
44
NAS 1200s Installation Guide
Index
A
USB 19
video 19
conventions
document 8
equipment symbols 9
text symbols 9
creating
file shares 35
logical disks 34
volume 34
Alert Email Settings 33
audience 7
authorized reseller, HP 12
auto discovery 27
B
Basic Setup 36
C
NAS 1200s Installation Guide
Index
D
Index
cautions
data loss 21
file corruption 21
client types 35
completing
system configuration 36
configuration
collect information 24
see also WebUI configuration
25
configuration setup 23
configuration tasks
preinitialization 23
Configure Storage 34
configuring the NAS 1200s 20
connectors
keyboard 19
mouse 19
NICs 19
power 19
RJ45 19
serial 19
data replication 36
default login 28, 30, 31
default page 32
deployment
NAS 1200s 18
DHCP (dynamic host configuration
protocol)
defined 24
Distributed File System 36
document
conventions 8
prerequisites 7
related documentation 8
domain 36
dynamic host configuration
protocol See DHCP 24
E
Email Settings 33
equipment symbols 9
45
Ethernet ports
configuring 24
loopback cables 26
European Union Notice 40
expansion slots, locations 19
F
features
hardware 14
redundancy 17
software 15
software features 15
NAS 1200s device, illustrated 16
NAS 1200s rear view, illustrated
19
Network Interface Information 33
New Partition Wizard 34
O
options, configuration 13
P
help, obtaining 11
host configuration protocols,
DHCP and non-DHCP 24
HP
authorized reseller 12
storage website 12
technical support 12
permissions
group 35
user 35
Physical disks 34
power connector 19
Preinitialization 23
preinitialization
collect information for
configuration 24
prerequisites 7
product definition 14
product overview 13
K
Q
G
getting help 12
H
keyboard connector 19
quotas 36
L
R
LocalHost 31
M
mouse connector 19
N
NAS 1200s
defined 14
dependencies and requirements
18
deployment 18
setup and configuration
overview 20
46
rack stability, warning 11
RAID arrays 34
Rapid Startup configuration
review screen, illustrated 33
Rapid Startup wizard screen,
illustrated 32
RapidLaunch CD
used for configuration 26
RapidLaunch device discovery
screen, illustrated 28
RapidLaunch search screen,
illustrated 27
redundancy 17
related documentation 8
NAS 1200s Installation Guide
Remote Desktop 34
requirements
IP networking and setup 18
storage 18
requirements and dependencies
18
RJ45 connectors
location 19
storage management overview 21
symbols in text 9
symbols on equipment 9
System Information 33
S
U
serial connector 19
serial number location, illustrated
29
setup and configuration, NAS
1200s 20
setup, related documents 20
Shadow Copies 36
slot locations
PCI slot 1 19
PCI slots 2 and 3 19
SNMP Settings 33
storage management
file sharing elements 22
file system elements 22
logical storage elements 21
storage management and Virtual
Replicator 21
NAS 1200s Installation Guide
T
technical support, HP 12
text symbols 9
USB connectors 19
user and group permissions 35
V
video connector 19
W
warning
rack stability 11
symbols on equipment 9
websites
HP storage 12
WebUI configuration
direct attach method 31
RapidLaunch method 25
Remote Browser method 29
47
48
NAS 1200s Installation Guide
Download PDF

advertising