US List Price Catalog

US List Price Catalog

US List Price Catalog

July 1, 2011

A Nilfisk-Advance Brand

KEY CONTACTS

Customer Service, Shipping and Credit:

Brenda Carter, Customer Service Director ................................................................................................................763-745-3758

Steve Haskamp, Credit Manager ......................................................................................................................763-745-3725

Dealer Customer Service/Order Service and Parts Orders ..................................................................800-334-1083, Opt. 1

Service Dispatch....................................................................................................................................800-334-1083, Opt. 2

Technical Service/Support ....................................................................................................................800-334-1083, Opt. 3

Warranty Claims ....................................................................................................................................800-334-1083, Opt. 4

Accounts Receivable ............................................................................................................................800-334-1083, Opt. 5

Customer Zone Registration..................................................................................................................800-334-1083, Opt. 6

Commercial National Accounts Customer/Order Service ................................................................................800-486-8830

National Accounts Customer Service/Order Service ........................................................................................800-486-8830

GSA Accounts Customer Service/Order Service ..............................................................................................888-742-8470

CleanLease

Leasing:

..........................................................................................................................................877-859-2976

ii

ORDERING PROCEDURES

Overview

Kent and Euroclean strive to make doing business with us easy. We give you fast and efficient methods of obtaining machines, parts and accessories. The following are the policies and procedures:

Ordering

Kent and Euroclean dealers may place their orders online through Customer Zone, by email, phone or fax.

You may need to speak to a Customer Service Representative to verify part numbers or select the right machines, parts or accessories. The following is the Customer Service contact information:

Customer Zone:

Toll-free Customer Service phone number:

Toll-free Customer Service fax number:

Customer Service email address: www.kenteuroclean.com

800-334-1083

866-261-4779 [email protected]

All orders placed through Customer Zone, email, fax, phone or online will be confirmed via fax, email or hard copy confirmation and will be viewable on the Customer Zone. You can sign up for Customer Zone by calling 800-334-1083.

When faxing or emailing an order, please include the following information:

• Your purchase order number

• “Ship to” address

• Your nine-digit customer account number

• Part number for all machines, parts, accessories and item descriptions as listed in price schedules

• Include any special shipping instructions (air, lift gate, inside delivery, appointment required).

All additional costs will be responsibility of the dealer.

• Authorized signature

Please note - Kent and Euroclean cannot “add on” items to an order once it has been processed. “Add On” items will be entered as a new order.

Minimum Order Program

There is a $50.00 minimum order for parts. Parts or accessory orders totaling less than $50.00 will be invoiced for the full $50.00. All parts include freight for ground shipment only. Minimum order is reduced to $25.00 on all shipments

when placed electronically on Customer Zone.

Drop-Ship Program

Kent and Euroclean will not drop-ship machines, parts or accessories outside the ordering dealer’s Area of Primary

Responsibility (APR) without prior approval from your Sales Director, Division Manager or Sales Representative.

Shortage

Verify the number of packages received before signing the freight bill of lading. Carriers sign for the accepted number of cartons or bundles as indicated on the bill of lading. If there is a shortage at the time of delivery, note the shortage on the original copy of the bill of lading, along with the driver's signature and call Customer Service to report shortage.

Damage in Transit

All shipments should be inspected immediately upon receipt. Do not accept any shipment showing external evidence of damage unless the freight carrier makes proper notation on your copy and their copy of the freight bill. Your shipment is carefully packed according to freight classification regulations and inspected before leaving our warehouse. Notify Kent and Euroclean about any freight that is refused due to damage. All apparently “good” freight must be inspected and any concealed damage must be reported to Kent and Euroclean Customer Service within seven (7) days of receipt. Any claims made after this time period will not be honored unless claim is recuperated from the freight carrier.

iii

ORDERING PROCEDURES, Continued:

Freight Program

All orders will be shipped F.O.B. Shipping Point, Shippers Choice. Freight will be handled as follows:

Machine Machine Parts and Accessories

Total Order < US $5,000 Total Order > US $5,000

Prepaid by Kent and added to invoice Prepaid by Kent

Shipping Ground

Prepaid by Kent

If freight requirement is other than above, it will be considered special freight with handling charges such as Next Day Air or expedited delivery being prepaid and added to the invoice.

Freight Routing

All orders are shipped FOB Shipping Point. Our Logistics Contractor will consign all shipments. If you have specific requirements or need special services, contact a Kent and Euroclean Customer Service Representative. Any additional costs associated with special freight requests are the responsibility of the dealer and will be invoiced accordingly. (includes, but is not limited to, expedited freight liftgates, inside deliveries, etc.)

Parts Shipments

All expedited orders must be received by 3 p.m. CST in order to be eligible for same day shipment. While same day shipment is not guaranteed, all expedited orders where parts are in stock will ship either same day or within 24 hours.

All standard parts orders where parts are in stock will be shipped within 72 hours of order placement.

Ship-ins/Ship-outs

Dealers will occasionally sell to accounts that have multiple locations. When Kent and Euroclean machines are installed outside the selling dealer’s own APR, it is the responsibility of the selling dealer to contact the Kent and Euroclean

Commercial Dealer who handles the end-user’s location. Arrangements should be made by the selling dealer to insure that the end-user is provided with the proper warranty and service support.

The recommended procedure is:

1. The selling dealer contacts the installing dealer to inform them of the sale and to make arrangements for local support.

2. The selling dealer contacts the end-user to inform them of the arrangements through the dealer.

3. Machines should be shipped to the local dealer for proper set-up and installation. Once this is completed, the installing dealer sends the original Kent and Euroclean Installation Warranty to Kent and Euroclean Headquarters, and sends a copy to the selling dealer.

4. Upon verification of the installation, the selling dealer should promptly compensate the installing dealer. Whether the installing dealer is required to do a demonstration should be a factor in calculating the installing dealer/s override.

Price Change Protection

Dealers may apply for price protection on quoted business. Requests for price protection must be applied for within fourteen days of the effective price change date and directed to the Sales Director for approval.

An order placed under this program must include a copy of the original quotation, end-user purchase order and the Sales

Director’s price protection approval.

iv

Contents

Key Contacts ............................................................................................................................ii

Ordering Procedures ............................................................................................................iii

Euroclean Upright Vacuums ................................................................................................1

Kent Upright Vacuums ..........................................................................................................2

Euroclean Canister Vacuums................................................................................................3

Euroclean Wet/Dry Tank Vacuums ......................................................................................8

Kent Extractors........................................................................................................................9

Euroclean Extractors ............................................................................................................12

Euroclean Dryers ..................................................................................................................12

Euroclean Specialty Products ............................................................................................13

Kent Sweepers ......................................................................................................................14

Kent Floor Machines ............................................................................................................15

Euroclean Burnishers ..........................................................................................................17

Kent Automatic Scrubbers ................................................................................................18

Warranty

EUROCLEAN UPRIGHT VACUUMS

ReliaVac

• Lifetime fan

• 7 amp motor

• Six brush height settings

• 6 inch furniture clearance base height

• 50 ft (15 m) Safety yellow power cord

Part Number

03002A

Description

ReliaVac 12

Single Motor Upright Vacuum - 12 inch (30 cm) cleaning path

Steel core brush roller

Easy clean fan cover

Approximate shipping weight 21 lbs (10 kg)

03003A

03004A

03005A

ReliaVac 12DC

Single Motor Upright Vacuum - 12 inch (30 cm)cleaning path

Steel core brush roller

Easy clean fan cover

Clear plastic dirt cup to collect debris

Approximate shipping weight 22 lbs (10 kg)

ReliaVac 12HP

Single Motor Upright Vacuum - 12 inch (30 cm)cleaning path

Aluminum core brush roller

Headlight

Easy clean fan cover

Approximate shipping weight 21 lbs (10 kg)

ReliaVac 16HP

Single Motor Upright Vacuum - 16 inch (40 cm) cleaning path

Aluminum core brush roller

Headlight

Easy clean fan cover

Approximate shipping weight 22 lbs (10 kg)

$286.00

$332.00

$363.00

$479.00

1

Accessories for ReliaVac

56039515

56630563

30864A

56630273

56630325

56630489

56630492

56630493

30860A

56648423

56637120

56016563

56648413

56648414

56052964

56643426

Dirt cup conversion kit

Drive belt, all models

Green fan and pulley kit

Lexan fan

Tool kit with wand for 12 inch (30 cm) models only, extension wand, tools

Disturbulator, 12 inch (30 cm), steel

Disturbulator, 12 inch (30 cm), aluminum

Disturbulator, 16 inch (40 cm), aluminum

Combo zipper bag, black, with paper bag

Top fill bag, black

Paper bags, standard, Pack of 10

Medi-Vac Microstat paper bag, Pack of 10

Bristle strip sets, 12 inch (30 cm)

Bristle strip sets, 16 inch (40 cm)

Magnetic pick-up bar, 12 inch (30 cm)

Magnetic pick-up bar, 16 inch (40 cm)

KENT UPRIGHT VACUUMS

Champion

• Two 1.125 hp vacuum motors, 0.33 hp brush motor, 70 dB A

• 1 bushel (35 L) cloth bag with optional paper bag

• Built in hose stretches to 56 inches

Part Number

56648330

Description

Champion 28

Wide-Area Carpet Vacuum - 28 in (71 cm) cleaning path

Built-in hose and wand

Includes cloth vacuum bag

Approximate shipping weight 131 lbs (59 kg)

Accessories for Champion

56330608

56109609

56330690

56330573

56330920

56323296

Bag clip, closes open end of cloth shake out bag

Cloth Bag

Paper bag, Pack of 6

Exhaust filter, two replaceable foam filters

MicroStat filtration, 99.94% efficient at .3 microns

Vacuum tool kit, two plastic clamps, crevice tool, dust tool, and tool adapter

$3,226.00

$50.00

$5.20

$35.00

$5.20

$74.50

$33.50

$53.30

$58.50

$36.00

$25.50

$12.50

$28.00

$5.20

$5.20

$31.00

$36.00

$5.50

$59.50

$35.50

$6.50

$40.00

$60.50

2

EUROCLEAN CANISTER VACUUMS

WhisperClean

• 53 dB A sound level, 1,100 watt motor

• Four levels of filtration, post fan HEPA filter optional

• Includes 12" combination floor tool, dust brush, upholstery tool and flexible crevice tool

Part Number

9056611010

Description

WhisperClean

Canister Vacuum - Quiet and powerful suction in a compact machine.

Shipping Weight 28 lbs (12.7 kg)

Accessories for WhisperClean

82367810

12018001

81906500

1408492510

11276901

81140900

32043700

1408435500

1408436500

1408551500

1408561500

1408400510

12018201

1408404500

56649625

56100745

56100776

56208645

56330608

1408423500

81530400

56100761

56100807

56100959

Standard Tools, Accessories and Parts - These Items Ship With The

WhisperClean

2-Ply dust bag, 2.4 gallon (9 L), pack of 5

Hose assembly complete with bent wand and vacuum interface, tapered, 6 ft

(1.9m)

Telescopic straight tube, chrome plated steel, 1.25 inch (32mm)

12 inch (30 cm) multi-surface double articulated floor tool, roller wheel, gray,

1.25 inch (32mm)

Round rotating dust brush, gray, 1.25 inch (32mm)

Soft flexible crevice tool, gray, 1.25 inch (32mm)

Rectangular upholstery tool, gray, 1.25 inch (32mm)

Foam filter for lid, washable

Multi layer paper filter, machine comes with one but only sold in pack of 5

Motor protection filter, black

Foam exhaust silencer

Motor cassette 110-120V, 60hz

Parking clip for combination nozzle

Optional Tools, Accessories and Parts

HEPA filter cartridge with screws, post fan

Turbo tool air driven brush, medium duty, clean out door, black, 1.25 inch

(32mm)

Kit. Medium duty turbo tool (56649625) with reducer

Turbo tool air driven brush, heavy duty with clean out door, white, 1.25 inch

(32mm)

Cloth shake out dust bag, clip not included, 2.4 gallon, (9 liters)

Bag clip, closes open end of cloth shake out bag

Basket filter for bagless operation, synthetic filter media

Crevice tool with suction relief holes, hard plastic, gray 1.25 inch (32mm)

Felt scallop tool for delicate hard floors, 1.25 inch (32mm) X 15 inches (38cm)

Gray plastic scalloped carpet tool, 1.25 inch (32mm) X 15 inches (38cm)

Paddle tool or gator tool, 1.25 inch (32mm)

$585.00

$20.50

$44.00

$36.00

$60.50

$16.20

$9.60

$12.00

$10.80

$13.00

$5.50

$10.20

$181.00

$6.70

$52.00

$76.00

$199.50

$191.50

$33.50

$5.50

$39.00

$11.20

$59.50

$28.00

$38.50

3

UZ 934

• 1,100 watt two stage motor, sound level 68 dB A

• Three levels of filtration standard, HEPA standard on UZ 934-H

• Waterlift 91", air flow 66 CFM

Part Number

9052549030

Description

UZ 934

Canister Vacuum - Powerful performance in a compact lightweight package

HEPA Filter Optional

Shipping Weight 23 lbs (10.43 kg)

9052549020 UZ 934-H

Canister Vacuum - Powerful performance in a compact lightweight package

HEPA Filter Standard

Shipping Weight 23 lbs (10.43 kg)

Accessories for UZ 934

1406905010

1406430500

1407584500

0116431500

1407087500

0103098500

0113104500

1407542010

1406667040

1406880500

1402781100

1403304500

1406879500

56649625

1405213010

0118130500

1405612000

Standard Tools, Accessories and Parts - These Items Ship With The UZ 934

2-ply paper dust bag, 2.6 gallon (9.8 liters), pack of 5

Hose assembly with vacuum interface and bent wand, black, 8 ft X 1.25 inch

(32mm)

Bent end wand assembly, 1.25 inch (32mm)

Wand, straight section, sold individually, aluminum, 1.25 inch (32mm)

12 inch multi-surface double articulated floor tool, roller wheel, black, 1.25 inch

(32mm)

Crevice tool, black, 1.25 inch (32mm)

Combination round duster/upholstery tool, black, 1.25 inch (32mm)

HEPA filter, standard on UZ 934-H

HEPA pre-filter for 1407542010

Cartridge filter, standard on UZ934

Vacuum hose, black, 8 ft without fittings, 1.25 inch (32mm)

UZ934 Vacuum interface, black, 1.25 inch (32mm)

Exhaust filter, pack of 5

Optional Tools, Accessories and Parts

Turbo tool air driven brush, medium duty, clean out door, black, 1.25 inch

(32mm)

Hose adapter to connect extra hoses

Wand, telescopic, aluminum, 1.25 inch (32mm)

Cloth shake out dust bag, 2.6 gallon (9.8 L)

$460.00

$551.00

$19.10

$35.00

$18.60

$22.50

$54.50

$5.90

$17.80

$90.00

$15.50

$35.00

$30.50

$8.40

$18.30

$76.00

$11.40

$41.00

$110.50

4

GD 930

• 1,100 Watt, Two Stage Motor, Waterlift 89 inches, Air Flow 67 CFM

• Standard Foam Filter or HEPA Versions

• Includes 12 inch Combination Floor Tool, Upholstery/Dust Brush and Crevice Tool

Part Number

9055314010

Description

GD 930

Canister Vacuum - HEPA Filter Optional, One Speed

Shipping Weight 28 lbs (12.7 kg)

9055314030 GD 930-H

Canister Vacuum - HEPA Filter Standard, One Speed

Shipping Weight 28 lbs (12.7 kg)

$950.00

$1,091.00

Accessories for GD 930

1407015020

1402782500

1403846500

1402781100

1407584500

0118130500

1407087500

0103098500

0113104500

1402666010

1401515500

1401535500

1409189000

1407313020

1405213010

56649625

0116431500

Standard Tools, Accessories and Parts - These Items Ship With The GD 930

Dust bag for GD 930 series, 4 gallon (15 L), pack of 5

6 ft hose assembly with vacuum interface and bent wand, black, 1.25 inch (32mm)

GD 930 vacuum interface, twist on

Vacuum hose, black, 8 ft without fittings, 1.25 inch (32mm)

Bent end wand assembly, 1.25 inch (32mm)

Wand, telescopic, aluminum, 1.25 inch (32mm)

12 inch multi-surface double articulated floor tool, roller wheel, black, 1.25 inch

(32mm)

Crevice tool, black, 1.25 inch (32mm)

Combination round duster/upholstery tool, black, 1.25 inch (32mm)

HEPA filter, standard on GD 930-H and GD 930-H2

Foam filter, standard on non-HEPA GD 930

Motor protection filter

Optional Tools, Accessories and Parts

Carrying harness allows GD 930 to worn as a backpack

High filtration dust bag, 4 gallon (15L), pack of 10

Hose adapter to connect extra hoses

Turbo tool air driven brush, medium duty, clean out door, black, 1.25 inch

(32mm)

Wand, straight section, sold individually, aluminum, 1.25 inch (32mm)

$13.20

$55.50

$13.40

$30.50

$18.60

$41.00

$54.50

$5.90

$17.80

$143.50

$11.00

$11.00

$39.50

$88.00

$11.40

$76.00

$22.50

5

UZ 964 Hip Vac

• 6.4 pound (2.9 kg) With Cord

• 50' grounded power cord with cord carrying strap

• Includes 12 inch combination floor tool, upholstery/dust brush, paddle tool and crevice tool

Part Number

9052435010

Description

UZ 964 Hip Vac

Hip Vacuum - 650 watt motor. HEPA filter optional.

Shipping Weight 16 lbs (7.26 kg)

$459.00

9052435020 UZ 964-H Hip Vac

Hip Vacuum - 650 watt motor, HEPA Filter Standard.

Shipping Weight 16 lbs (7.26 kg)

$542.00

9052437010 UZ 964 Hip Vac Sr.

Hip Vacuum - 1,000 watt motor for superior cleaning power, HEPA Filter

Optional.

Shipping Weight 16 lbs (7.26 kg)

Accessories for UZ 964 Hip Vac

1406554010

1408246040

1408070000

1407584500

1407087500

0103098500

1407547000

0113104500

1406794010

1406597500

1407160010

1406554050

1406908000

56649625

1408323000

Standard Tools, Accessories and Parts

Dust bag, .58 gallon, pack of 5

Wand, straight section, steel, black, 1.25 inch (32mm), 2 required

Hose assembly complete with vacuum interface and bent end, 1.25 inch (32mm)

X 4 ft

Bent end wand assembly, 1.25 inch (32mm)

12 inch multi-surface double articulated floor tool, roller wheel, black, 1.25 inch

(32mm)

Crevice tool, black, 1.25 inch (32mm)

Gator tool or paddle tool, black, 1.25 inch (32mm)

Combination round duster/upholstery tool, black, 1.25 inch (32mm)

Round motor protection filter, pack of 1

Exhaust filter, pack of 3

HEPA filter, round

Optional Tools, Accessories and Parts

High filtration dust bags (pack of 10)

Cloth dust bag, reusable, shake out

Turbo tool air driven brush, medium duty, clean out door, black, 1.25 inch

(32mm)

Belt extender 12 inches for larger users

$495.00

$9.70

$7.30

$54.50

$18.60

$54.50

$5.90

$15.20

$17.80

$5.40

$33.00

$84.50

$36.00

$27.00

$76.00

$16.20

6

Back Vac

• 6 Qt and 10 Qt Capacity

• Quiet - 62 decibels

• CRI - Seal of Approval

• Optional HEPA Filtration

• Include 4.5 ft. hose, 2-piece S-Wand, Quick Glide Multi-Surface Tool, Crevice, Upholstery and Dusting tools

Part Number

9060609010

9060706010

Description

Back Vac 6

Backpack Vacuum - 1300 watts, 6 qt. capacity, 4 level filtration

Optional HEPA filter

50 foot safety yellow cord

Includes tool kit

Shipping Weight 20.5 lbs. (9.3 kg)

Back Vac 10

Backpack Vacuum - 1300 watts, 10 qt. capacity, 4 level filtration

Optional HEPA filter

50 foot safety yellow cord

Includes tool kit.

Shipping Weight 24 lbs. (10.9 kg)

1 4 7 1 0 9 7 5 1 0

1 4 7 1 0 9 8 5 1 0

1 4 7 1 0 9 5 5 0 0

1 4 7 1 0 8 9 5 0 0

1471383500

1 4 7 1 3 8 4 5 0 0

1 4 7 1 3 8 5 5 0 0

1 4 7 1 3 8 6 5 0 0

1 4 7 1 3 8 7 5 0 0

1471388500

1 4 7 1 0 9 9 5 0 0

1 4 7 1 1 0 0 5 0 0

1 4 7 1 0 9 0 5 1 0

1 4 7 1 2 3 7 5 0 0

Accessories for Back Vac

1

1

1

4

4

4

1471383520

1 4

7 1

0 7

7 1

1 0

5 4

3 8

7 1 2 4

4 5

7 5

3 5

0 0

0 0

1 0

6 5 1 0

1471245500

1 4 7 1 2 3 6 5 0 0

1407087500

56649625

1408246040

81906500

Standard Filters, Tools, Accessories and Parts

D u s t b a g s

D u s t B a g s

, 1 0 Q .t

, P k g o f 1

, 6 Q t .

P k g .

o f 1 0

0

M o t o r P r e f i tl e r , P k g o f 3

E x h a u s t F i tl e r , P k g o f 3

Quick Glide Multi-surface Floor tool, 14 in (35.5 cm), 1.5 in. (38 mm) fitting

U p h o l s t e r y T o o l , 5 i n ( 1 3 c m ) , 1 .

5 i n .

( 3 8 m m ) f ti it n g

D

C r u e s v

t B i c r e u s h

T o

, o l

3

, i

1 n

7

( i

7 .

n

5

( 4 c m )

3 c

, 1 m )

.

,

5

1 .

i n

5

.

i

( n

3

.

8

( 3 m

8 m ) m f m ) ti it n g f ti it n g

2 P i e c e , S C u r v e A l u m i n u m W a n d , 1 .

5 i n .

( 3 8 m m ) f i tt i n g

Standard Tool Kit, includes Wand, Quick-glide, Upholstery, Dust and Crevice Tools

O u t e r C l o t h S a c k F

O u t e r C l o t h S a c k F li t e r li t e r f o r 1 0 f o r 6 Q

Q

.t

.t

S t a n d a r d H a r n e s s

V a c u u m H o s e , w ti

, c o m p l e t e h c u f f s , 4 .

5 f t ( 1 3 7 c m ) , 1 .

5 i n .

( 3 8 m m ) f i t it n g

Optional Filters, Tools, Accessories and Parts

O p it o n a l H E P A F i tl e r

P a d d l e F l o

H a r d F l o o r o r T

B r u o o l s h

, 1 2

T o o l i n ( 3 0 .

5 c m )

, 1 4 i n ( 3 5 .

5

, 1 .

c m

5

) i n

, 1

.

(

.

5

3 8 i n m

.

( m ) f

3 8 m ti it n g m ) f i

Carpet Scallop Tool, 13.6 in (34.

5 c m ) , 1 .

5 i n .

( 3 8 m m ) f i t tt i n g it n g

P r e m i u m H a r n e s s , c o m p l e t e

Power Module - Lower portion of the backpack, complete, dark grey only

V a c u u m H o s e , w ti h b e n t h a n d l e , 1 .

2 5 i n , ( 3 2 m m ) f i t it n g

12 inch multi-surface double articulated floor tool, roller wheel, black, 1.25 inch

(32mm)

Turbo tool air driven brush, medium duty, clean out door, black, 1.25 inch

(32mm)

Wand, straight section, steel, b l a c k , 1 .

2 5 i n c h ( 3 2 m m ) , 2 r e q u i r e d

Telescopic straight tube, chrome p l a t e d s t e e l , 1 .

2 5 i n c h ( 3 2 m m )

7

$522.00

$557.00

$ 7 4 .

0 0

$ 3 9 .

0 0

$ 3 8 .

5 0

$ 2 9 .

5 0

$ 8 8 .

5 0

$343.00

$ 3 9 .

5 0

$54.50

$76.00

$ 7 .

3 0

$ 3 6 .

0 0

$ 2 1 .

5 0

$ 1 8 .

9 0

$ 6 .

5 0

$ 8 .

5 0

$39.50

$ 9 .

4 0

$ 1 1 .

2 0

$ 1 0 .

4 0

$ 5 1 .

0 0

$93.00

$ 2 8 .

0 0

$ 2 5 .

5 0

$ 6 6 .

5 0

$ 1 6 .

0 0

EUROCLEAN WET/DRY TANK VACUUMS

EWD-315 and EWD-320

• 1,350 watt, 2-stage motor, 50 ft (15m) safety yellow power cord

• Unique floor tool system for hard floors, soft floors and wet pick-up

• Dry basket filter standard - dust bags and HEPA filter optional

Part Number

9058911010

Description

EWD-315

Wet/Dry Tank Vacuum - 15 gallon (57 liter) tank

Eight Machines Per Pallet

Shipping Weight 46 lbs (20.87 kg)

9058912010 EWD-320

Wet/Dry Tank Vacuum - 20 gallon (76 liter) tank

Eight Machines Per Pallet

Shipping Weight 48 lbs (21.77 kg)

Accessories for EWD-315 and EWD-320

1404001010

0

1408248040

1408248030

1408248010

1408248020

1408658500

1

1

4

1 6

0 8

4 5

6 8

1 0

2 5

1 0

0 0

1403304030

1405132000

Standard Tools, Accessories and Parts - These Items Ship With The EWD-

315 and EWD-320

Hose assembly complete with vacuum interface and curved wand, 1.5" (38mm) x

10' (3m)

A l u m i n u m w a n d s e c t i o n , t y p i c a ll y t w o n e e d e d , 1 .

5 " ( 3 8 m m )

Three piece floor tool with hard floor, soft floor and squeegee inserts, 14"

(355mm) X 1.5" (38mm)

Hard floor replacement insert, included in 1408248040, 14" (355mm) X 1.5"

(38mm)

Soft floor replacement insert, included in 1408248040, 14" (355mm) X 1.5"

(38mm)

Squeegee replacement insert, included in 1408248040, 14" (355mm) X 1.5"

(38mm)

Dry basket filter, washable, filters 99.1% of particles between 0.5-1.5 microns fits

Summit 9

M o t o r p r o t e c it o n f i tl e r , b l u e f i t s S u m m i t 9 , 1 3 , 2 0

Vacuum interface for bulk hose, s c r e w o n , b l a c k , 1 .

5 " ( 3 8 m m )

Curved wand assembly for bulk hose or replacement, screw on, 1.5" (38mm)

56600458

5 6

56600459

5 6

0 1

0 1

1 4

1 0

1 0

0 8

5 5

5 5

7 3

0 7 0 3

7 0 7 4

3 3

0 9

8 0 2 0

1 0 0 0

6 0 1 0

1470766500

Optional Tools, Accessories And Parts

24 inch (61 cm) front mount squeegee kit, includes hose, hardware kit, and squeegee assembly, all items ship separate

2 4 i n c h ( 6 1 c m ) f r o n t m o u n t s q u e e g e e r e p l a c e m e n t b l a d e s , b l u e , 1 e a c h

30 inch (76 cm) front mount squeegee kit, Includes hose, hardware kit, and squeegee assembly, all items ship separate

3 0

C r e i n c h ( 7 6 c m ) f r o n v i c e t o o l , w h ti e

t m o u n t

, h a r d p l a s s q u e e g e e r e p l a c e m e n it c , f ti s 1 .

5 " ( 3 8 m m )

t b l a d w a n d e s , b l u e , 1 e a c h

R o t a

F i tl e r it n g b a g d

, u s

P

t a p b r e r u s h

( 3 -

, w h i t e p a c k ) f

, r u b b e r i z e d ti s 1 2 2 0 g

, a l f ti s

.

w e

1 .

5 " ( 3 8 m m

/t d r y v a c

) w a n d

HEPA protection ring, installation a n d u s e r e q u i r e d f o r H E P A f i tl r a it o n

8

$705.00

$759.00

$86.50

$ 3 4 .

0 0

$53.00

$17.00

$5.70

$16.50

$36.00

$ 5 .

4 0

$ 2 4 .

0 0

$46.50

$264.00

$ 2 8 .

5 0

$303.00

$ 2 3 .

5 0

$ 1 4 .

3 0

$ 3 7 .

0 0

$ 3 1 .

5 0

$ 7 2 .

0 0

1408678500

1402148030

56204536

1406588030

56409563

56209233

56100373

56100372

56100377

56100376

56100375

HEPA filter replacement, can only be used when HEPA protection ring

(1470766500) installed and used, DOP MIL-STD-282 and EN1822 H13 filtration

Bulk hose, 1.5" (38mm), gray, 25' maximum length, quantity ordered will be the length received, priced and sold by the foot

Hose coupler, metal, 1.5" OD X 5.44" long, allows two 1.5" hoses to be connected

Optional S-WAND Tools - Heavy Duty Wet and Dry Pick Up Tools

S-WAND hose assembly, 1.5" (38mm) X 10' (3m), vacuum interface on one end, gray hose cuff on other end, required for S-WAND vacuum tools

S-WAND two piece metal wand, button lock, 1.5 inch (38 mm)

S-WAND squeegee tool, 14 inch (36 cm) X 1.5 inch (38 mm)

S-WAND soft floor tool, 14 inch (36 cm) X 1.5 inch (38 mm)

S-WAND hard floor tool, 14 inch (36 cm) X 1.5 inch (38 mm)

S-WAND round dust brush, 1.5 inch (38 mm)

S-WAND crevice tool, 1.5 inch (38 mm)

S-WAND upholstery tool, 1.5 inch (38 mm)

KENT EXTRACTORS

SelectSpot

• 1.5 hp, 2-stage vacuum motor, 79 inch waterlift, 88 CFM

• 25 foot (7.6 m) detachable power cord

• Built in carry handle with large drain cap

Part Number

56220100

Description

SelectSpot

Carpet Spot Extractor - with hand tool, 8 foot (2.4 m) solution-recovery hose and 25 foot (7.6m) detachable power cord.

$1,049.00

$128.50

$5.10

$23.50

$59.00

$60.00

$66.50

$25.50

$36.00

$15.20

$12.30

$14.60

Accessories for SelectSpot

56220018

56220041

56220070

56262207

56220037

56220107

56220061

Accessory cart, tubular steel cart with molded storage tray, cord hooks and strain relief

Exhaust filter, pack of 10

Hand upholstery tool, stainless steel hand tool with plastic shoe and internal single spray jet

Stand up wand kit, includes 2 piece stainless steel wand with plastic shoe and hardware to mount it to optional accessory cart

Hand tool, standard

Hand tool nozzle

Extension cord

$329.00

$39.50

$154.50

$296.50

$92.50

$19.00

$55.50

9

Klenzor

• CRI SOA Approval (All Models)

• 1.5 three stage vacuum motor, 117 inch waterlift, 98 CFM

• 50 foot (15 m) safety yellow power cord

• Brush and vacuum shoe removed without tools

• Laminar flow vacuum shoe for constant acceleration and superior water recovery

Part Number

56265004

Description

Klenzor 16

Self Contained Extractor -CRI Deep Cleaning Seal of Approval

Single Spray Jet technology

16 inch (41 cm) cleaning path

7 gallon (26 liter) solution tank

56265005 Klenzor 18MPH

Self Contained Extractor - CRI Deep Cleaning Seal of Approval

Single Spray Jet technology

18 inch (46 cm) cleaning path

Flip handle design for walk behind extraction

11 gallon (42 liter) solution tank

Accessories for Klenzor

56265044

56265175

56265176

56265099

56265177

56265178

56265150

56220109

56220070

56262209

56265305

56265306

56250314

56265368

56265174

16 inch (41 cm) nylon standard carpet brush

16 inch (41 cm) nylon hard floor brush for lighter scrubbing

16 inch (41 cm) MidGrit 240 hard floor brush for aggressive scrubbing

18 inch (46 cm) nylon standard carpet brush

18 inch (46 cm) nylon hard floor brush for lighter scrubbing

18 inch (46 cm) MidGrit 240 hard floor brush for aggressive scrubbing

Hard floor kit. Converts 16 and 18 extractors into an auto scrubber, brushes purchased separately

Hand tool, general purpose, stainless steel hand tool with plastic shoe and single spray jet

Hand upholstery tool, stainless steel hand tool with plastic shoe and internal single spray jet

Light duty soft floor wand, stainless steel wand assembly with single spray jet and plastic shoe

Heavy duty soft floor wand, stainless steel wand assembly with single spray jet, drag handle and stainless steel shoe

Scrub & Vac wand. Hard floor wand. Requires Scrub and Vac tool (56250314)

Scrub & Vac tool, 14 inch (36 cm)

8 foot (2.4 m) solution and recovery hose assembly.

15 foot (4.6 m) solution and recovery hose assembly

$2,857.00

$3,628.00

$154.50

$252.00

$428.00

$681.00

$310.50

$130.50

$218.50

$111.50

$165.50

$307.50

$134.00

$169.00

$267.00

$388.50

$102.00

10

Rainmaker

• 14 gallon (53 liter) solution tank

• Two 2-stage vacuum motors, 150 inch waterlift

• Onboard tool storage and large wheels for easy transport

Part Number

56649694

Description

Rainmaker C

Portable Extractor - 100 psi with 15 ft (4.6 m) vacuum and solution hose and single bend floor tool.

56649695 Rainmaker H

Portable Extractor - 100 psi with built-in heater, 15 ft (4.6 m) vacuum and solution hose and single bend floor tool.

$3,044.00

$3,779.00

Accessories for Rainmaker

56102804

56102805

56102807

56102871

56102874

Single bend floor tool

Double bend floor tool

Stainless steel hand tool

Vacuum hose and solution line, 15 foot (7.6 m)

Solution hose with fittings for 56102804

$464.50

$530.00

$215.00

$229.50

$36.50

11

EUROCLEAN EXTRACTORS

Xtrac

• CRI SOA Approved

• 5 gallon (19 liter) solution tank

• Self-leveling brush removed without tools

• Laminar flow vacuum shoe for constant acceleration and superior water recovery

Part Number

56265301

Description

Xtrac

Self Contained Extractor - CRI Deep Cleaning Seal of Approval

Single Spray Jet technology

12 inch (30 cm) cleaning path

5 gallon (19 liter) solution tank

Accessories for Xtrac

56265340

56220109

56220070

56262209

56265305

56265306

56250314

56265368

56265174

12 inch (30 cm) standard nylon carpet brush

Hand tool, general purpose, stainless steel hand tool with plastic shoe and single spray jet

Hand upholstery tool, stainless steel hand tool with plastic shoe and internal single spray jet

Light duty soft floor wand, stainless steel wand assembly with single spray jet and plastic shoe

Heavy duty soft floor wand, stainless steel wand assembly with single spray jet, drag handle and stainless steel shoe

Scrub & Vac wand. Hard floor wand. Requires Scrub and Vac tool (56250314)

Scrub & Vac tool, 14 inch (36 cm)

8 foot (2.4 m) solution and recovery hose assembly.

15 foot (4.6 m) solution and recovery hose assembly

EUROCLEAN DRYERS

HydroDry

• Rugged rotomolded design

• Convenient carrying handle

• Stackable

• 3 speed settings

$2,357.00

$103.50

$102.00

$154.50

$252.00

$428.00

$681.00

$310.50

$130.50

$218.50

Part Number

56115000

Description

HydroDry

Floor Dryer - 0.5 hp, 3-speed, single-phase 115 v/50-60 Hz motor

25 ft (7.6 m) safety yellow power cord

$433.00

Accessories for HydroDry

56115001 Handle and wheel kit $60.00

12

EUROCLEAN SPECIALTY PRODUCTS

Dust Magnet

• The clean, easy and lightweight alternative to traditional dust mopping

• Disposable sheets eliminates laundry and pre-spray expenses

• Built in static charge grabs debris and holds it like a magnet

• 23, 46, or 59 inch (58, 117, or 150 cm) cleaning path options

Part Number Description

Dust Magnet

Dry Dust Mopping System - Electrostatic Based Dry Dust Mopping System

Accessories for Dust Magnet

5

5

6

6

4

4

5 6 6 4

5 6 6 4

9

9

2

2

3

3

1

2

56649269

5

5

5

5

6

6

6

6

6

6

5 6

5 6

6

6

6

6

4

4

4

4

6 4

6 4

9 2 5 8

9 2 6 8

9

9

9

9

2

2

2

2

9 2

9 2

6

6

6

6

5

3

7

6

6 0

8 1

56649241

Disposable Dust Magnet Sheets

R o l l o f 1 0 0 S h e e t s , p e r f o r a t e d e v e r y 2 3 i n c h e s ( 5 8 c m )

2 0 0 P r e C u t S h e e t s 2 3 i n c h e s ( 5 8 c m ) e a c h

Mop Holders for Use with Dust Magnet Sheets

M o p H o l d e r

M o p H o l d e r ,

, 2

4

3

6 i n c h ( i n c h

5 8 c m )

( 1 1 7 c m ) , i n c l u d e s n o n a d j u s t a b l e h a n d l e

Mop Holder, 59 inch (150 cm), handle purchased separately (not for use with precut sheets)

Handle Options for Dust Magnet

N o n a d j u s t a b l e h a n d l e

A d j u s t a b l e h a n d l e , 3 9

, 5 9 t o 7 0 i n c h e s ( 1 5 0 c m ) i n c h e s ( 9 9 t o 1 7 8 c m )

C u s h i o n g r i p a d j u s t

S p e e d d u s t e r h a n d l e a b l e h a n d l e , 3 9 t o 7 0 i n c h e s ( 9 9 t o 1 7 8 c m )

Accessories and Kits

R e p l a c e a b l e f o a m p a d 2 3 i n c h ( 5 8 c m )

E r g o b e n d a n g l e d a d a p t e r

Start-Up Kit: 23 inch (58 cm) mop holder, adjustable handle, and 25 sheets.

$ 5 6 .

0 0

$ 1 0 2 .

0 0

$ 5 0 .

0 0

$ 1 3 7 .

0 0

$141.00

$ 2 4 .

0 0

$ 4 7 .

0 0

$ 4 7 .

0 0

$ 4 7 .

0 0

$ 1 0 .

9 0

$ 2 6 .

5 0

$93.00

13

KENT SWEEPERS

Edge 28B

• 59 dB A sound level

• Maintenance free gel battery standard

• Tools free removable main and side brooms

• Multi-purpose main broom designed specifically for superior performance on carpet and hard floors alike

Part Number

9084703010

Description

Edge 28B

Walk-Behind Sweeper - 28 inch (71 cm) cleaning path

55ah maint-free (gel) battery, one each (56206984)

Onboard battery charger

Polyester panel filter standard (wet resistant)

Multi-purpose polypropylene main broom

Accessories for Edge 28B

1463202000

1463035000

1463161000

1463166000

1463124000

Multi-purpose polypropylene main broom designed for superior performance on carpet and hard floor types

Replacement side broom, multi-purpose carpet or hard floor

Standard polyester panel filter

Dust containment skirting kit (contains front, back, both side skirts - no hardware)

Dust containment skirting kit (contains front, back, both side skirts, and all mounting hardware)

$3,884.00

$98.50

$22.00

$65.00

$28.00

$88.00

14

KENT FLOOR MACHINES

SelectLine

• Heavy-guage, metal design with chrome surfaces

• Activation switch safety interlock

• 50 foot (15 m), SuperFlex power cord with hospital grade plug

Part Number

01283A

01300A

01380A

01340A

01420A

Description

SelectLine 13

Floor Machine - 13" (33 cm) pad diameter

175 rpm

1 hp, 120V, dual capacitor motor

All metal, dual planetary gear transmission

Short trim pad driver, one each (30758A)

Approximate shipping weight: 98 lbs (44 kg)

SelectLine 17

Floor Machine - 17" (43 cm) pad diameter

175 rpm

1 hp, 120V, dual capacitor motor

All metal, dual planetary gear transmission

Short trim pad driver, one each (30638A)

Approximate shipping weight: 100 lbs (45 kg)

SelectLine 20

Floor Machine - 20" (51 cm) pad diameter

175 rpm

1 hp, 120V, dual capacitor motor

All metal, dual planetary gear transmission

Short trim pad driver, one each (30639A)

Approximate shipping weight: 104 lbs (47 kg)

SelectLine 17HD

Floor Machine - 17" (43 cm) pad diameter

175 rpm

1.5 hp, 120V, dual capacitor motor

All metal, triple planetary gear transmission

Short trim pad driver, one each (30638A)

Approximate shipping weight: 108 lbs (49 kg)

SelectLine 20HD

Floor Machine - 20" (51 cm) pad diameter

175 rpm

1.5 hp, 120V, dual capacitor motor

All metal, triple planetary gear transmission

Short trim pad driver, one each (30639A)

Approximate shipping weight: 112 lbs (51 kg)

15

$1,133.00

$1,206.00

$1,248.00

$1,343.00

$1,416.00

01450A SelectLine 20TS

Floor Machine - 20" (51 cm) pad diameter

Two-speed: 180 / 320 rpm

1.5 hp, 120V, DC rectified motor

All metal, triple planetary gear transmission

Short trim pad driver, one each (30639A)

Approximate shipping weight: 112 lbs (51 kg)

30638A

56505910

56505270

56505911

56505912

56505913

56505914

56505915

56505916

56505917

56505918

56505539

Accessories for SelectLine

53853A

11022A

56506006

56505195

56393567

56505019

56172305

56172313

30758A

56020194

56020196

56020200

56020223

56020309

Accessories for all SelectLine Models

Solution tank, 3 gallons (11 L), field installed

Weight kit, 10 lbs. (4.5 kg) each, 2 per machine maximum, machine must be minimum of 1.5 hp

Clutch plate, NP-92, nylon replacement

Pad retainer/centering device only, snap lock

“Big Mouth” pad retainer

Pad centering kit with mounting screws, includes 56393567, for use with

56505910 and 56505920

17 inch (43 cm) splash guard assembly

20 inch (51 cm) splash guard assembly

Brushes and Accessories for SelectLine 13

(All include NP-92 Clutch Plate)

Pad driver, short trim 13 inch (33 cm)

Fiber brush, .018 bassine bristles, general scrubbing, NP-9200 clutch plate

Polish brush, medium duty scrubbing on concrete, terrazzo, vinyl, NP-9200 clutch plate

Steel brush, steel wire, aggressive scrubbing/stripping, NP-9200 clutch plate

Poly brush, polypropylene bristles, heavy-duty scrubbing/stripping, NP-9200 clutch plate

Grit brush, nylon .040 bristles with medium grit general scrubbing, NP-9200 clutch plate

30639A

56505920

56505280

56505923

56505924

56505921

56505922

Brushes and Accessories for SelectLine 17 & 17HD

(All include NP-92 Clutch Plate)

Pad driver, short-trim 17 inch (43 cm)

Short Trim pad holder, 17 inch (43cm), includes "Big Mouth" pad retainer

Level set pad holder assembly

Magna Grit 46, nylon bristles with coarse grit, aggressive scrubbing/stripping

Dyna Grit 80, nylon bristles with medium grit, heavy-duty scrubbing/stripping

AgLite Grit 500 scrub brush, 6/12 nylon grit 500 for lite scrubbing/polishing

Prolene scrub brush, medium-duty scrubbing on concrete, terrazzo, vinyl

ProLite scrub brush, .018 thick polypropylene bristles, general scrubbing

Union Mix polishing brush, all natural fibers, for general polishing

MidGrit 240, nylon .030 bristles with medium grit, general scrubbing

MidLite Grit 180, nylon .040 bristles with medium grit, general scrubbing

Soft touch carpet shampoo brush, nylon bristle ring around smooth disc

Brushes and Accessories for SelectLine 20, 20HD, & 20TS

(All include NP-92 Clutch Plate)

Pad driver, short-trim 20 inch (51 cm)

Short trim pad holder, 20 inch (51 cm), includes "Big Mouth" pad retainer

Level set pad holder assembly

AgLite Grit 500 scrub brush, 6/12 nylon grit 500 for lite scrubbing/polishing

Prolene scrub brush, medium-duty scrubbing on concrete, terrazzo, vinyl

Magna Grit 46, nylon bristles with coarse grit, aggressive scrubbing/stripping

Dyna Grit 80, nylon bristles with medium grit, heavy-duty scrubbing/stripping

16

$1,731.00

$132.50

$134.50

$31.00

$15.80

$16.60

$23.00

$258.00

$319.50

$72.00

$106.00

$112.00

$92.50

$232.50

$332.00

$76.00

$113.00

$411.00

$228.50

$226.00

$222.50

$86.00

$86.00

$86.00

$222.50

$228.50

$370.50

$83.50

$117.00

$442.00

$305.50

$117.50

$336.00

$287.00

56505925

56505926

56505928

56505927

56505540

ProLite scrub brush, .018 thick polypropylene bristles, general scrubbing

Union Mix polishing brush, all natural fibers, for general polishing

MidLite Grit 180, nylon .040 bristles with medium grit, general scrubbing

MidGrit 240, nylon .030 bristles with medium grit, general scrubbing

Soft touch carpet shampoo brush, nylon bristle ring around smooth disc

EUROCLEAN BURNISHERS

ECB

• Dual compression spring technology for superior and consistent gloss performance

• Fold-and-Stow folding handle for easy pad changes and compact storage

• 1.5 hp DC rectified motor

• Angle activated safety switch

• 50' (15m) SuperFlex safety yellow cord with hospital grade plug

Part Number

01560A

01570A

Description

ECB1500

Cord Electric Burnisher - 20 inch (51cm) pad

Non-dust control

1,500 rpm

Includes pad holder

Approximate shipping weight 82 lbs (37 kg)

ECB2000

Cord Electric Burnisher - 20 inch (51cm) pad

Passive dust control

2,000 rpm

Includes pad holder and 10 dust bags

Approximate shipping weight 87 lbs (40 kg)

Accessories for ECB

56201569

57369A

56388354

976240

976327

Replacement dust bags, pack of ten

Pad retainer, screw on, blue

Burnishing pads, 20 inch (51cm), natural beige, case of 5

Aqua burnishing pads, 20 inch (51cm), case of 5

Natural blend white burnishing pads, 20 inch (51cm), case of 5

$110.50

$123.00

$313.00

$331.00

$439.00

$1,878.00

$2,246.00

$28.00

$25.50

$86.00

$48.00

$49.50

17

KENT AUTOMATIC SCRUBBERS

Razor E17 & SV17

• 7 gallon (26 L) solution and recovery tanks

• ECO Solution System

• Click-off/Click-on scrub heads (SV17)

• Maintenance-free gel batteries standard (SV17)

Part Number

9087113020

Description

Razor E17

Walk-behind Automatic Scrubber - Brush Assist - 17 inch (43 cm) disc

115 volt cord-electric

Prolene brush, one each (L08812891)

$3,464.00

56397542 Razor SV17

Walk-behind Automatic Scrubber - Brush Assist - 17 inch (43 cm) disc

86 Ah maint-free (gel) batteries, two each (56206988)

Prolene brush, one each (L08812891)

Onboard battery charger 115 VAC / 24 VDC

Accessories for Razor E17 & SV17

9 0 9 7 3 5 4 0 0 0

L 0 8 8 1 2 8 9 1

9 0 9 5 6 9 3 0 0 0

9 0 9 5 6 9 1 0 0 0

9 0 9 5 6 9 2 0 0 0

9 0 9 5 6 9 4 0 0 0

9 0 9 5 6 9 5 0 0 0

S

M q u e e g e e

P r o l e n e

P r o l i d

P a d ti e b r u s h

L

M i d G r ti e i t b r u s h

G b l a d e k i

2 4

U n i o n m i x h o l d e r r i

0

, 1 7 b r

, 1 7

, 1 7 u b r u s h s i n c h ( 4 3 c m ) h

,t i n c l u d e s f r o n t a n d r e a r b l a d e , p o l y u r e t h a n e i n c h ( 4 3 c m )

t 1 8 0 b r u s h

, 1 7 i

, 1 7 n c h i n c h ( 4 3 c m ) i n

( 4 c h (

3 c m

, 1 7 i n c h ( 4 3 c m )

4 3

) c m )

Brush Selector Guide (brush display 56505250 available)

Dyna Grit: Heavy-duty scrubbing on concrete floors.

Magna Grit: Extreme heavy-duty scrubbing on concrete floors.

AgLite Grit: General scrubbing of urethane coated, sealed or other hard surfaces.

ProLite: Light-duty polypropylene for general scrubbing.

Prolene: Medium-duty scrubbing on concrete, terrazzo and vinyl floor tile.

Union Mix: Used for polishing floors.

MidGrit: Lighter action general purpose scrubbing on sealed or unsealed concrete.

MidLite Grit: General purpose scrubbing of sealed or unsealed concrete floors.

Soft Nylon: For use on light dust coated floors where long life is required.

Hard Nylon: For general use on concrete floors where long life is required.

$5,249.00

$ 7 3 .

0 0

$ 9 5 .

0 0

$ 1 3 1 .

5 0

$ 3 3 6 .

0 0

$ 4 2 6 .

0 0

$ 1 7 2 .

5 0

$ 2 2 4 .

0 0

18

Razor 20 & 20T

• 11.1 gal (42 L) solution and recovery tank capacities

• ECO Solution System allows over 1 hour of scrub time per tank

• Click-on / Click-off scrub heads (20T)

• Hospital-quiet, 65.8 dB(A) sound level

Part Number

56170035

Description

Razor 20

Walk-Behind Automatic Scrubber - pad assist - 20 inch (51 cm) disc

105 Ah wet batteries, two each (56206962)

Pad holder, one each (L08837018)

Onboard battery charger 115 VAC / 24 VDC

56170036

56170037

56170038

Razor 20

Walk-Behind Automatic Scrubber - pad assist - 20 inch (51 cm) disc

98 Ah maint-free (gel) batteries, two each (56206985)

Pad holder, one each (L08837018)

Onboard battery charger 115 VAC / 24 VDC

Razor 20T

Walk-Behind Automatic Scrubber -traction drive - 20 inch (51 cm) disc

105 Ah wet batteries, two each (56206962)

Pad holder, one each (L08837018)

Onboard battery charger 115 VAC / 24 VDC

Razor 20T

Walk-Behind Automatic Scrubber - traction drive - 20 inch (51 cm) disc

98 Ah maint-free (gel) batteries, two each (56206985)

Pad holder, one each (L08837018)

Onboard battery charger 115 VAC / 24 VDC

Accessories for Razor 20 & 20T

Brush Selector Guide (brush display 56505250 available)

Dyna Grit: Heavy-duty scrubbing on concrete floors.

Magna Grit: Extreme heavy-duty scrubbing on concrete floors.

AgLite Grit: General scrubbing of urethane coated, sealed or other hard surfaces.

ProLite: Light-duty polypropylene for general scrubbing.

Prolene: Medium-duty scrubbing on concrete, terrazzo and vinyl floor tile.

Union Mix: Used for polishing floors.

MidGrit: Lighter action general purpose scrubbing on sealed or unsealed concrete.

MidLite Grit: General purpose scrubbing of sealed or unsealed concrete floors.

Soft Nylon: For use on light dust coated floors where long life is required.

Hard Nylon: For general use on concrete floors where long life is required.

L08837018

L 0 8 8 3 7 0 2 6

L 0 8 8 3 7 0 2 5

L 0 8 8 3 7 0 2 7

L 0 8 8 3 7 0 6 7

Pad Holders & Brushes for the Razor 20 & 20T

Short-trim pad holder with pa d r e t a i n e r

P r o L ti e b r u s h , 2 0 i n c h ( 5 1 c m )

, 2 0 i n c h ( 5 1 c m )

P r o l e n e b r u s h

U n i o n M i x b r u

, 2 0 s h i n c h ( 5 1 c m )

, 2 0 i n c h ( 5 1 c m )

A g L ti e G r i t 5 0 0 b r u s h , 2 0 i n c h ( 5 1 c m )

19

$5,616.00

$6,089.00

$6,509.00

$6,981.00

$

$

$

$

$

1

1

3

3

5

1 6

1 9

2

2

8

0 .

5 .

3

.

.

.

5 0

0 0

0 0

5 0

0 0

L08837029

L08837028

L08837066

L08837065

9097185000

9096736000

9096860000

9096858000

9096951000

51308B

56204221

56204201

MidGrit 240 brush, 20 inch (51 cm)

MidLite Grit 180 brush, 20 inch (51 cm)

Dyna Grit 80 brush, 20 inch (51 cm)

Magna Grit 46 brush, 20 inch (51 cm)

General Accessories for Razor 20

Extra-pressure kit, increase deck pressure to 70 lbs (32 kg)

General Accessories for Razor 20 & 20T

Bristle splash skirt, 20 inch (51 cm)

Squeegee blade kit, front and rear, standard, gum rubber

Squeegee blade kit, front and rear, polyurethane, wear resistant, oil resistant

Hour meter kit (field installed)

Solution fill port strainer (key saver)

Scrub & vac kit, includes scrub and vac tool, two bend wand, hose and coupler

Wet pick up kit, includes squeegee tool, two bend wand, hose and coupler

$299.50

$426.00

$498.50

$474.00

$79.50

$125.00

$23.00

$114.50

$89.00

$41.00

$392.00

$319.00

20

K

ENT

U.S.

AND

C

ANADA

L

IMITED

W

ARRANTY

Kent warrants to the original end user, each new machine, new accessories and genuine replacement parts against defects in material and workmanship under normal use and service. Our obligation under this warranty is limited to repair or replacement of the defective item at our factory or by an Authorized Service Center. Warranty coverage shall begin on the date of purchase by the original end user (as evidenced by your invoice from the factory or Authorized Dealer) or six (6) months from the date the machine was shipped from the factory, whichever is earlier. The start date of the warranty coverage on rider equipment is the date of purchase by the original end user, or one year from the date the machine was shipped from the factory, whichever is earlier. The warranty registration card must be completed and returned within 30 days of purchase. The warranty coverage period is specified below.

GROUP

All Battery Walk-Behinds

Cord Automatic Scrubbers

Floor Machines

Cord Burnishers

Cord Carpet Extractors

Large-Area Vacs

Canister Vacs (including BackVacs

6

)

Parts

1,2

3 years

3 years

3 years

3 years

3 years

3 years

3 years

Labor

2

1 year

1 year

1 year

1 year

1 year

1 year

1 year

UZ964, UZ934

Wet/Dry Vacs & All-Purpose

Single-Motor (exposed bag) Vacs

Carpet Dryers

Accessories/Replacement Parts

4

EXCEPTIONS

Roto-mold Components

1 year

3 years

1 year

1 year

90 days

8 years

1 year

1 year

1 year

1 year none

See Note 5

Vacuum motors 1 year 1 year

Batteries As offered by manufacturer.

Travel

180 days

180 days

180 days

180 days

180 days

180 days

180 days

180 days

See Note 5

2,3

Internal Combustion Engines As offered by manufacturer.

External Battery Chargers As offered by manufacturer.

NOTES:

1-Parts repaired or replaced are guaranteed for the remainder of the original machine warranty period.

2-Coverage only applicable to products sold and used in the United States and Canada.

3-Travel warranty coverage limited to 3 hours of round trip travel time to remedy a defective product or part.

4-Applies to replacement parts only after machine warranty coverage has expired.

5-Follows warranty offered on original machine.

6-Backplates are warranted for the life of the machine

This warranty shall not apply to repairs resulting from accidents or misuse, damage in transit, overloading the capacity of the machine, failure due to lack of proper maintenance or care as described in the operating and maintenance instructions. Minor adjustments, such as tightening of screws or bolts not connected with the replacement of parts, are not covered. Replacement of expendable wear items such as scrub brushes, pad holders, carbon motor brushes, bulbs, bags, filters and various rubber/plastic parts are also not covered. Repairs or alterations by an organization other than the factory or an Authorized Service Center are not covered and will void any Kent warranty as to the parts or systems repaired or altered by a non-authorized organization.

THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION OF THE LIMITED WARRANTIES STATED WITHIN. NO OTHER WARRANTY,

EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, IS MADE EXCEPT AS EXPRESSLY STATED HEREIN. ANY STATUTORY IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, THAT ARE IMPOSED BY LAW DESPITE THE EXPRESS LIMITATION OR

WARRANTIES ABOVE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE WRITTEN WARRANTY. BUYER UNDERSTANDS, ACKNOWLEDGES

AND AGREES THAT THE REMEDIES PROVIDED UNDER THIS LIMITED WARRANTY ARE THE SOLE AND EXCLUSIVE REMEDIES AVAILABLE TO THE

BUYER. KENT WILL NOT BE LIABLE FOR ANY OTHER OR ADDITIONAL DAMAGES, INCLUDING BUT NOT LIMITED TO INDIRECT, SPECIAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE FURNISHING, PERFORMANCE, USE OF OR INABILITY TO USE THE

MACHINE. ANY EXTENSIONS OF OR MODIFICATIONS MADE TO THIS WARRANTY BY A DEALER/DISTRIBUTOR OF KENT ARE THE SOLE

RESPONSIBILITY OF THE DEALER/DISTRIBUTOR.

All transportation or shipping charges resulting from the return of machines, parts, or accessories shall be the responsibility of the end-user. When returning, please provide an explanation of the problem and include the serial number of the machine as well as the name of the selling organization. The Technical Service department of the authorized Dealer Service Center or the factory will investigate and then contact you.

Transportation of hazardous waste or contaminated equipment is subject to various laws and regulations. In returning machines, parts, or accessories under this limited warranty, the end user must certify in writing that the machines, parts or accessories being returned have not been used for handling, clean up, or disposal of hazardous waste or hazardous materials including but not limited to such things as asbestos, anthrax etc. or if the machines, parts or accessories being returned have been used for handling, clean up, or disposal of hazardous waste or hazardous materials, then the end user must have the machines, parts or accessories decontaminated by licensed and qualified decontamination professionals and provide written certification of this decontamination signed by the decontamination professionals. These machines, parts or accessories are to be returned only to the local Kent Authorized Service Center for Warranty service along with decontamination certification.

NILFISK-ADVANCE Reserves the right to change its warranty policy without notice.

14600 21 st

Avenue North

Plymouth, MN 55447-3408 www.kenteuroclean.com [email protected]

Phone:

Fax:

800-334-1083

800-340-6035

©2011 Nilfisk-Advance, Inc.

Form L1263K, 6-11

NOTES

A Nilfisk-Advance Brand

©2011 Nilfisk-Advance, Inc.,

Printed in USA, Form L1502K 6-10-11

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement