HZB-12-230V Manual - The Sharper Image

HZB-12-230V Manual - The Sharper Image
PORTABLE ICE MAKER
Item No. 204943
Owner’s Guide
Please read this guide and and keep it for future reference. Sharper Image branded items
purchased from SharperImage.com include a 1-year limited replacement warranty. If you need
assistance with this item, please call Sharper Image Customer Service at 1 (877) 210-3449.
The Sharper Image® name and logo are registered trademarks. Manufactured and marketed by Camelot SI, LLC under license.
©Sharper Image All Rights Reserved.
1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ..............................................................3
PREPARING YOUR ICE MAKER FOR USE .........................................................3
GETTING TO KNOW YOUR UNIT .......................................................................5
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER ..............................................................................7
CONNECTING YOUR ICE MAKER ............................................................................7
USING YOUR ICE MAKER .......................................................................................7
CLEANING AND MAINTANINGING YOUR ICE MAKER ................................................8
TROUBLESHOOTING .............................................................................................8
2
SAFETY
ICE
INSTRUCTIONS
MAKER FOR USE
IMPORTANT YOUR
PREPARING
Your safety and the safety of others are very important.
We have provided many important safety messages manual and your appliance.
Always read and obey all safety massages.
This is the safety alert symbol:
!
All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”.
DANGER
WARNING
These words mean:
You can be killed or seriously injured if you don’t immediate follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance
of injury, and tell you what can happen if the instructions are not followed.
When using electrical appliances, basic safety precautions should be followed to reduce the
risk of fire, electric shock, and injury to persons or property. Read all instructions before using
any appliance.

Do not operate this,or any other appliance with a damaged cord.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
This ice-maker must be positioned so that the plug is accessible .
Connect to properly polarized outlets only. No other appliance should be plugged into the
same outlet. Be sure that the plug is fully inserted into the receptacle.

Do not run the power cord over carpeting or other heat insulators. Do not cover the cord.
Keep cord away from traffic areas, and do not submerge in water.

We do not recommend the use of an extension cord, as it may overheat and become a risk
of fire. If you must use an extension cord, use No.14AWG minimum size and rated no less
than 1875 watts.

Unplug the ice maker before cleaning or making any repairs or servicing.

Exercise caution and use reasonable supervision when appliance is used near children.
3

Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and
make sure that there is at least 4 inches of space between the back of your unit and wall.
Keep a minimum distance of 4 inches on each side of your unit free.

Do not use other liquid to make the ice-cube other than water.

Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or
explosion.

Do not tip over.

If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to
room temperature before plugging it in.
WARNING: This appliance must be grounded.
IMPORTANT:
The wires in this mains lead are colored in accordance with the following code:
Green or Green with a strip yellow:
Grounding
White:
Neutral
Black:
Live
To avoid a hazard due to instability of the appliance, it must be placed at an even or flat
surface.
4
GETTING TO KNOW YOUR UNIT
General instrucion
1. Ice scoop.
2. Ice full sensor
3. Ice basket
4. Top cover with transparent window
5. Air outlet
6. Water drain cap: at front btm side of the unit.
7. MAXIMUM WATER LEVEL:
▲
Remove the ice basket, you can see the water level mark.
5
OPERATING PROCEDURES & MAINTENANCE
Postion of control panel & function
Control Panel: Easy to use, visible functions touch display setting.
A. Selected ice size displaying: Small and Large.
B. Power indicator
C. Ice-Full indicator
D .Water shortage indicator
E. Button to turn on/off the unit.
F. Button to select ice cube size.
6
UNPACKING YOUR ICE MAKER
1. Remove the exterior and interior packaging. Check if ice basket and ice scoop inside. If any
parts are missing, please contact our customer service.
2. Remove the tapes for fixing ice shovel, ice basket & ice scoop. Clean the tank & ice basket.
3. Put the ice maker on a level & flat counter top without direct sunlight and other sources of
heat (i.e.: stove, furnace, radiator). Maker sure that there is at least 4 inches gap between
the back & LH/RH sides with the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging the ice maker in.
5. The appliance must be positioned so that the plug is accessible.
CONNECTING YOUR ICE MAKER
DANGER
* Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three prong wall outlets to
minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under
any circumstances, cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician.
3. This appliance requires a standard 110-120volt, 60Hz electrical outlet with three-prong
ground.
USING YOUR ICE MAKER
1. Open the cover, remove the ice basket and pour water into tank.
Keep water level below the water level mark.
2. Press “Power” button on the control panel to begin the ice making cycle.
3. Select the ice cube size by pressing the “Select” button. If the room temperature is lower
than 60℉, it is recommended to select small ice cube in order to avoid ice sticking together.
4. The ice making cycle lasts approx. 6 to 13 minutes, depending on seletion of ice cube size
and the room temperature. The recommended room temperature is 50℉ to 105 ℉
5. If water pump can’t inject water, the ice maker will stop automatically, and the “Add Water”
indicator will be on Press “Power” button, fill water up to the max. water level mark and
press “Power” button again to turn on the unit again. Allow the refrigerant liquid inside
the compressor at least 3 minutes to settle before restarting.
6. The ice maker stops when the ice basket is full and the “Ice” indicator will be on. Warning:
Direct sunlight or sunlight reflection may cause infared sensor malfunction. If the
unit doesn’t stop even ice cubes obstruct sensor, move the unit where no sunlight.
7. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level.
If unit isn’t to be used, drain all the water and dry the tank.
7
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Lack of Water.
Stop the ice maker, fill water, and
press “Power” button again to
restart the unit.
“Ice” indicator is on.
Ice is full in basket.
Remove ice from ice basket.
Continuous press “Select” button
5 seconds, the unit could make
ice 10 cycles even “Ice” indicator
is on.
Ice cubes stick together.
Stop the ice maker, and restart it
The ice making cycle is
when the ice blocks melt. Select the
too long.
small size ice cube selection.
“ Add Water” indicator is
on.
Water temperature
inner tank is too low.
in Replace the water. Temperature of
water recommended at 15℉-90℉
Room temperature or The room temperature should be 50
water temperature in ℉-105℉, water temperature should
inner tank is too high.
be 15℉-90℉
Ice making cycle is normal
Refrigerant in
but no ice formed.
system leaks.
cooling
Verify by a qualified technician.
Pipe in the cooling
Verify by a qualified technician.
system is blocked.
CLEANING AND MAINTAINING YOUR ICE MAKER
Before using your ice maker, it is strongly recommended to clean it thoroughly.
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water by unplugging the
drain cap on front bottom side.
4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and
warm water.
5. Dry the interior and exterior with a clean soft cloth.
6. When the machine is not to be used for a long time, drain water completely & dry the
interior.
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement