IBM 131 User's Manual

Self Checkout 4845
򔻐򗗠򙳰
Parts Manual
Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
S131-0106-02
Self Checkout 4845
򔻐򗗠򙳰
Parts Manual
Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
S131-0106-02
Updated October 16, 2007
Note
Before using this information and the product it supports, be sure to read the “Safety ” on page vii and the general
information under Appendix B, “Notices,” on page 125.
October 2007
|
|
This edition applies to IBM Self Checkout Solution, machine type 4845, Models 131, 151, 152, 153, and 171 and
IBM Self Checkout Systems, machine type 4845, Models 602, 603, 606, 612, 613, 616, 800, 810, and BW3.
Current versions of Retail Store Solutions documentation are available on the IBM Retail Store Solutions Web site at:
www.ibm.com/solutions/retail/store/support. Click Publications.
A form for reader’s comments is also provided at the back of this publication. If the form has been removed, address
your comments to:
IBM Corporation
Retail Store Solutions Information Development
Department ZBDA
PO Box 12195
Research Triangle Park, North Carolina, 27709 USA
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute whatever information you
supply in any way it believes appropriate without incurring any obligation to you.
© Copyright International Business Machines Corporation 2006, 2007. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Updated October 16, 2007
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
How to Use This Parts Manual . . . . . . . . . . . . . . . . . . . v
Identifying a Right Hand or Left Hand Model . . . . . . . . . . . . . v
Related Publications . . . . . . . . . . . . . . . . . . . . . . . vi
Where to Find More Information . . . . . . . . . . . . . . . . . . vii
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Publications Accessibility . . . . . . . . . . . . . . . . . . . . . vii
Providing Feedback . . . . . . . . . . . . . . . . . . . . . . . viii
Uninterruptible Power Supply Option . . . . . . . . . . . . . . . . . viii
Taiwanese Battery Recycling Statement. . . . . . . . . . . . . . . . viii
End of life disposal . . . . . . . . . . . . . . . . . . . . . . . viii
Chapter 1. Core Module . . . . . . . . . . . .
Assembly 1: Core Module . . . . . . . . . . . .
Assembly 2: Bill Dispenser . . . . . . . . . . . .
Assembly 3: Bill Dispenser Main Unit Illustration 1 of 3. .
Assembly 4: Bill Dispenser Main Unit Illustration 2 of 3 .
Assembly 5: Bill Dispenser Main Unit Illustration 3 of 3 .
Assembly 6: Bill Dispenser Lower Unit . . . . . . .
Assembly 7: Bill Dispenser Cassette . . . . . . . .
Assembly 8: Bill Dispenser Communications and Power .
Assembly 9: Coin Dispensers . . . . . . . . . .
Assembly 10: Coin Acceptor . . . . . . . . . . .
Assembly 11: Bill Acceptor . . . . . . . . . . . .
Assembly 12: Printers TIx and TGx . . . . . . . .
Assembly 13: Printers TF6 and TM6 . . . . . . . .
Assembly 14: Printers Fiscal . . . . . . . . . . .
Assembly 15: Printers Epson . . . . . . . . . . .
Assembly 16: Magnetic stripe reader and pin pad mount
Assembly 17: Hand held scanner . . . . . . . . .
Assembly 18: Countertop . . . . . . . . . . . .
Assembly 19: Signature Capture and Coupon Acceptor .
Assembly 20: Lane light and transaction light . . . . .
Assembly 21: Lane PC, Mouse, and Keyboard . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 1
. 2
. 6
. 8
. 10
. 12
. 14
. 16
. 18
. 20
. 24
. 26
. 28
. 32
. 36
. 38
. 40
. 42
. 44
. 46
. 48
. 50
Chapter 2. Load Cells, Platens, Plates, and Retaining Fences . . . . . . 53
Assembly 22: Load Cell . . . . . . . . . . . . . . . . . . . . . . 54
Assembly 23: Platens and Retaining Fences . . . . . . . . . . . . . . 56
Chapter 3. Security Conveyor . . . . . . . . . . . . . . . . . . . 59
Assembly 24: Security Conveyor . . . . . . . . . . . . . . . . . . 60
Chapter 4. Transport Conveyor . . . . . . . . . . . . . . . . . . 63
Assembly 25: Transport Conveyor . . . . . . . . . . . . . . . . . . 64
Chapter 5. Bagging and Carousel Bagging . . . . . . . . . . . . . 67
Assembly 26: Carousel parts . . . . . . . . . . . . . . . . . . . . 70
Chapter 6. Wire Bag Rack . . . . . . . . . . . . . . . . . . . . 73
Assembly 27: Wire Bag Rack . . . . . . . . . . . . . . . . . . . 74
Chapter 7. BOSS . . . . . . . . . . . . . . . . . . . . . . . . 77
Assembly 28: BOSS FRUs . . . . . . . . . . . . . . . . . . . . 78
© Copyright IBM Corp. 2006, 2007
iii
Updated October 16, 2007
Chapter 8. Integrated Paystation . . . . . . . . . . . . . . . . . 81
Assembly 29: Paystation . . . . . . . . . . . . . . . . . . . . . 82
Chapter 9. EPO (Red) Button . . . . . . . . . . . . . . . . . . . 85
Assembly 30: EPO (Red) Button . . . . . . . . . . . . . . . . . . 86
Chapter 10. Cables . . . . . . . . . . . . . . . . . . . . . . . 89
Assembly 31: Cables. . . . . . . . . . . . . . . . . . . . . . . 90
Assembly 32: Power Cords . . . . . . . . . . . . . . . . . . . . 92
Chapter 11. Locks and Keys . . . . . . . . . . . . . . . . . . . 95
Assembly 33: Currency Lock with Key . . . . . . . . . . . . . . . . 96
Assembly 34: Cabinet Lock with Key . . . . . . . . . . . . . . . . . 98
Chapter 12. Field Kits and Tools . . . . . . . . . . . . . . . . . 101
Assembly 35: Field Kits and Tools . . . . . . . . . . . . . . . . . 102
Appendix A. Cabinet Parts and Sensors . . . . . . . . . .
Assembly 36: Core Module Cabinet FRUs . . . . . . . . . .
Assembly 37: Security Conveyor and Transport Conveyor Cabinet .
Assembly 38: Models 152, 602, and 612 Bagging Cabinet . . . .
Assembly 39: Models 153, 603, and 613 Bagging Cabinet . . . .
Assembly 40: Model N54 Bagging Cabinet . . . . . . . . . .
Assembly 41: Models 171, 800, and 810 Bagging Cabinet . . . .
Assembly 42: Models 171, 800, and 810 Bumpers, Order Separators,
Goods Shelf . . . . . . . . . . . . . . . . . . . .
Assembly 43: Sensors, Emitters, and Detectors . . . . . . . .
|
. .
. .
. .
. .
. .
. .
. .
Soft
. .
. .
Appendix B. Notices . . . . . . . . . . . . . . . . . . .
Electronic emission notices . . . . . . . . . . . . . . . . .
Federal Communications Commission (FCC) statement . . . . .
European Union EMC Directive conformance statement . . . . .
Industry Canada Class A Emission Compliance statement . . . .
Avis de conformité aux normes d’Industrie Canada . . . . . . .
Germany . . . . . . . . . . . . . . . . . . . . . .
Australia and New Zealand . . . . . . . . . . . . . . . .
Japanese power line harmonics compliance statement . . . . . .
Japanese Voluntary Control Council for Interference (VCCI) statement
Cable ferrite requirement . . . . . . . . . . . . . . . . . .
Electrostatic Discharge (ESD) . . . . . . . . . . . . . . . .
Product Recycling and disposal . . . . . . . . . . . . . . .
Battery return program . . . . . . . . . . . . . . . . . .
For Taiwan: . . . . . . . . . . . . . . . . . . . . . .
For the European Union: . . . . . . . . . . . . . . . . .
For California: . . . . . . . . . . . . . . . . . . . . .
Flat panel displays . . . . . . . . . . . . . . . . . . . .
Monitors . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks. . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
105
106
110
112
114
116
118
. . 120
. . 122
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
125
127
127
127
128
128
128
128
128
129
129
129
129
130
131
131
131
132
132
132
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Part number index. . . . . . . . . . . . . . . . . . . . . . . 135
iv
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Preface
This parts manual lists the field replaceable units (FRUs) for the IBM Self Checkout
Solution Models 131, 151, 152, 153, and 171 and the IBM Self Checkout Systems
Models 602, 603, 606, 612, 613, 616, 800, 810, and BW3.
How to Use This Parts Manual
This manual is divided into the following components:
v Core module. See Chapter 1, “Core Module,” on page 1.
v Load cell. See Chapter 2, “Load Cells, Platens, Plates, and Retaining Fences,”
on page 53.
v Security conveyor. See Chapter 3, “Security Conveyor,” on page 59.
v Transport conveyor. See Chapter 4, “Transport Conveyor,” on page 63.
v Bagging module. See Chapter 5, “Bagging and Carousel Bagging,” on page 67.
v Wire Bag Rack. See Chapter 6, “Wire Bag Rack,” on page 73.
v BOSS. See Chapter 7, “BOSS,” on page 77.
v Paystation. See Chapter 8, “Integrated Paystation ,” on page 81.
v EPO. See Chapter 9, “EPO (Red) Button,” on page 85.
v Cables. See Chapter 10, “Cables,” on page 89.
v Locks and keys. See Chapter 11, “Locks and Keys,” on page 95.
v Field kits. See Chapter 12, “Field Kits and Tools,” on page 101.
v Cabinet parts. See Appendix A, “Cabinet Parts and Sensors,” on page 105.
Fasteners, screws, bolts, nuts, grommets and other miscellaneous parts are located
in Chapter 12, “Field Kits and Tools,” on page 101.
Pictures in this manual are for reference only. The actual part might look different.
When ordering, be sure to order the correct part using the machine type and model
number.
Parts without index numbers or FRU numbers are shown for reference only. Some
parts listed by FRU number are not pictured.
Identifying a Right Hand or Left Hand Model
Figure 1 on page vi shows a right-hand lane and a left-hand lane and gives the
naming conventions used in this manual for referring to the sides of the lanes.
© Copyright IBM Corp. 2006, 2007
v
Updated October 16, 2007
A
Start of right-hand lane.
B
Rear side (or left side relative to the transaction flow) of right-hand lane.
The emitters are on the left side of the conveyor.
C
End of right-hand lane.
D
Front (customer side or right side relative to the transaction flow) of
right-hand lane. The detectors are on the right side of the conveyor.
E
End of left-hand lane.
F
Rear side (or right side relative to the transaction flow) of left-hand lane.
The detectors are on the right side of the conveyor.
G
Start of left-hand lane.
H
Front (customer side or left side relative to the transaction flow) of left-hand
lane. The emitters are on the left side of the conveyor.
Figure 1. Right-Hand and Left-Hand Lanes
Related Publications
v IBM Self Checkout 4845 Overview Models 131, 15x, 171, 6xx, 8xx and BW3,
GC30-9732
v IBM Self Checkout 4845 Hardware Planning and Installation Guide Models 131,
15x, 171, 6xx, 8xx, and BW3, GC30-9733
v IBM Self Checkout Solution 4845 Operations Guide Models 131, 151, 152, 153,
and 171, GA27-4341 (for software releases prior to Version 5 Release 2)
v IBM Self Checkout Solution 4845 Operations Guide Models 131, 151, 152, 153,
and 171, with Version 5 Release 2 Software, GC30-9734
v IBM Self Checkout 4845 Operations Guide Models 6xx, 8xx, and BW3 with IBM
Checkout Environment for Consumer-Service Version 6, GC30-9729
|
|
|
|
|
|
vi
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
v IBM Self Checkout 4845 Hardware Service Guide Models 131, 15x, 171, 6xx,
8xx, and BW3, GY27-0442
v IBM Checkout Environment for Consumer-Service Software Planning, Installation,
and Maintenance Guide for Version 6, SC30-4156
v IBM Checkout Environment for Consumer-Service Software Programming Guide
for Version 6, SC30-4157
v IBM 4610 SureMark Printers Hardware Service Manual, GY27-0355
|
|
|
|
|
|
|
v IBM 4610 SureMark Printers User Guide, GA27-4151
v IBM 4820 SurePoint Solution Planning, Installation and Service Guide,
GA27-4231
v IBM 4800 SurePOS 720, 740, and 780 Hardware Service Guide, SA27-4329
v IBM 4800 SurePOS 720, 740, and 780 Planning, Installation and Operation
Guide, GA27-4328
v IBM 4694 Point-of-Sale Terminal Hardware Service Manual, SY27-0364
v IBM Safety and Regulatory Information - Read This First, GA27-4004
Where to Find More Information
Current versions of Retail Store Solutions documentation are available on the IBM
Retail Store Solutions Web site at www.ibm.com/solutions/retail/store. Select
Support; then select Publications.
For information about publications not contained on the Web site, contact your IBM
representative or your place of purchase.
Safety
Before you begin to install or service this product, read the safety information in the
IBM Safety and Regulatory Information - Read This First, GA27-4004. This book
describes the safe procedures for installing and servicing IBM products. In addition,
read the following safety information.
DANGER
|
|
|
|
Electrical power must be removed before performing any maintenance or
service on the self checkout product. See IBM Self Checkout 4845 Hardware
Service Guide Models 131, 15x, 171, 6xx, 8xx, and BW3, GY27-0442 for
information about removing power.
DANGER
|
|
|
|
If the self checkout product is equipped with an uninterruptible power
supply some devices are still energized after the removal of ac power. The
uninterruptible power supply must be disconnected to ensure that all
power is removed from the self checkout product.
Publications Accessibility
The soft-copy version of this guide and other related publications are
accessibility-enabled.
Preface
vii
Updated October 16, 2007
Providing Feedback
Your feedback is important in helping IBM provide accurate and high-quality
information.
You can use either of these ways to provide feedback:
v Go to http://www.ibm.com/solutions/retail/store. Click Support, then click
Publications. Click the publication comments within the introductory text.
Provide the requested information and your comments. Be sure to include the
name and form number of the document in the [Publication ID] field.
v Print and complete the form at the end of this document. Return the form to IBM
by mail or by giving it to an IBM representative.
If applicable, include a reference to the specific location of the text (for example, the
page or table number) on which you are commenting.
Between major revisions of this document, there might be minor technical updates.
The latest version of this document is available on the Retail Store Solutions Web
site at http://www.ibm.com/solutions/retail/store/support/publications/.
Uninterruptible Power Supply Option
This product contains a sealed lead acid battery. The battery must be recycled or
disposed of properly.
In the United States, IBM has established a collection process for reuse, recycling,
or proper disposal of used IBM sealed acid batteries. For information about proper
disposal of these batteries, please contact IBM at 1-800-426-4333. Please have the
IBM part number listed on the battery available prior to your call.
For information about disposal of sealed acid batteries outside the United States, go
to the following URL or contact your local waste disposal facility.
http://www.ibm.com/ibm/environment/products/batteryrecycle.shtml
Taiwanese Battery Recycling Statement
Waste batteries, please recycle.
End of life disposal
This unit must be recycled or discarded according to applicable local and national
regulations. IBM encourages owners of information technology (IT) equipment to
responsibly recycle their equipment when it is no longer needed. IBM offers a
variety of product return programs and services in several countries to assist
equipment owners in recycling their IT products. Information on IBM product
recycling offerings can be found on IBM’s Internet site at http://www.ibm.com/ibm/
environment/products/prp.shtml.
viii
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Notice: This mark applies only to countries within the European Union (EU) and
Norway.
Appliances are labeled in accordance with European Directive 2002/96/EC
concerning waste electrical and electronic equipment (WEEE). The Directive
determines the framework for the return and recycling of used appliances as
applicable throughout the European Union. This label is applied to various products
to indicate that the product is not to be thrown away, but rather reclaimed upon end
of life per this Directive.
In accordance with the European WEEE Directive, electrical and electronic
equipment (EEE) is to be collected separately and to be reused, recycled, or
recovered at end of life. Users of EEE with the WEEE marking per Annex IV of the
WEEE Directive, as shown above, must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available to customers for the
return, recycling, and recovery of WEEE. Customer participation is important to
minimize any potential effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For proper collection and
treatment, contact your local IBM representative.
Disposal of IT products should be in accordance with local ordinances and
regulations.
Preface
ix
Updated October 16, 2007
x
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 1. Core Module
Assembly 1: Core Module . . . . . . . . . . . .
Assembly 2: Bill Dispenser . . . . . . . . . . . .
Assembly 3: Bill Dispenser Main Unit Illustration 1 of 3. .
Assembly 4: Bill Dispenser Main Unit Illustration 2 of 3 .
Assembly 5: Bill Dispenser Main Unit Illustration 3 of 3 .
Assembly 6: Bill Dispenser Lower Unit . . . . . . .
Assembly 7: Bill Dispenser Cassette . . . . . . . .
Assembly 8: Bill Dispenser Communications and Power .
Assembly 9: Coin Dispensers . . . . . . . . . .
Assembly 10: Coin Acceptor . . . . . . . . . . .
Assembly 11: Bill Acceptor . . . . . . . . . . . .
Assembly 12: Printers TIx and TGx . . . . . . . .
Assembly 13: Printers TF6 and TM6 . . . . . . . .
Assembly 14: Printers Fiscal . . . . . . . . . . .
Assembly 15: Printers Epson . . . . . . . . . . .
Assembly 16: Magnetic stripe reader and pin pad mount
Assembly 17: Hand held scanner . . . . . . . . .
Assembly 18: Countertop . . . . . . . . . . . .
Assembly 19: Signature Capture and Coupon Acceptor .
Assembly 20: Lane light and transaction light . . . . .
Assembly 21: Lane PC, Mouse, and Keyboard . . . .
© Copyright IBM Corp. 2006, 2007
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. 2
. 6
. 8
. 10
. 12
. 14
. 16
. 18
. 20
. 24
. 26
. 28
. 32
. 36
. 38
. 40
. 42
. 44
. 46
. 48
. 50
1
Updated October 16, 2007
Assembly 1: Core Module
8
7
5
2
3
6
4
1
9
11
10
16
12
17
18b
19
14
13
18
18c
15
40
20
21
22
23
39
24
37
38
25
26
36
27
35
41
34
33 32
31
2
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
30
29
28
Assembly 1: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
1–
–1
1
–2
–3
–4
40M9470
40M9469
41J9296
1
1
1
–4
40M9366
1
–4
41J9298
1
–4
41J9295
1
–4
41J9297
1
–4
28R5455
1
–4
–4
–
–
44M1846
44D1157
14J1054
42M5667
1
1
1
1
–
–
01L1637
42M5632
1
1
–5
–5
–6
40N6220
40N6224
1
1
1
41E1851
1
–7
–8
–9
–9
–10
–11
–12
–13
–
–14
–14
–
–15
–16
–16
–17
–18
–18
1
41E1849
41E1850
41D7211
28R3786
41D7083
41K6370
42K0356
42K0360
42K0358
41J9839
41J9841
1
1
1
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including finding and ordering parts. See “Identifying a Right
Hand or Left Hand Model” on page v for how to identify left hand and right
hand models.
Hopper coin dispenser. See “Assembly 9: Coin Dispensers” on page 20 for a
complete listing of coin dispenser parts.
Cable, Reset Button
Button Assembly, Reset (on upper door behind monitor)
Monitor, IBM SurePoint Model 4820 - 5WN (USB with I/O support), pearl white
(BOSS) (machines built after July 31, 2006)
Monitor, IBM SurePoint Model 4820 - 5WN (USB with I/O support), pearl white
(BOSS)
Monitor, IBM SurePoint Model 4820 - 5WN (USB without I/O support), pearl white
(lane)
Monitor, IBM SurePoint Model 4820 - 5GN (USB with I/O support), iron gray
(RAP/BOSS)
Monitor, IBM SurePoint Model 4820 - 5GN (USB without I/O support), iron gray
(lane) (machines built after July 31, 2006)
Monitor, IBM SurePoint Model 4820 - 5GN (USB without I/O support), iron gray
(lane)
Monitor, IBM SurePoint Model 4820 - 5GN (RS232 touch I/O), iron gray (EMEA)
Monitor, flat, T115 TFT, Model 4942 - 15X, black
3.8 cable, Analog video Monitor, IBM SurePoint Model 4820.
3.8 cable, Analog video Monitor, IBM SurePoint Model 4820 (machines built after
July 31, 2006).
3.8 cable, USB Touchscreen Monitor, IBM SurePoint Model 4820.
3.8 cable, USB Touchscreen Monitor, IBM SurePoint Model 4820 (machines built
after July 31, 2006).
Magnetic stripe reader, pearl white (attaches to the 4820 display)
Magnetic stripe reader, iron gray (attaches to the 4820 display)
Bill acceptor assembly. See “Assembly 11: Bill Acceptor” on page 26 for a complete
listing of bill acceptors and parts.
See “Assembly 12: Printers TIx and TGx” on page 28.
See “Assembly 12: Printers TIx and TGx” on page 28.
Cover plate if there is no pinpad (not shown)
Magnetic strip reader mount and pin pad mounting. See “Assembly 16: Magnetic
stripe reader and pin pad mount” on page 40).
Coin acceptor. See “Assembly 10: Coin Acceptor” on page 24 for a complete listing
of coin acceptors and parts.
SurePoint display hinge
Display mounting kit (includes 4 - shoulder washers, 8 - screws, 4 - M4 top inserts,
1 - spacer plate, 1 - limiter (right hand), and 1 - limiter (left hand).
Scanner/scale (shown for reference only)
Scanner Adapter plate, Fujitsu (customer furnished scanner)
Speaker
Speaker (machines built after July 31, 2006)
Speaker Audio cable (not shown)
Scanner/scale contrast label (shown for reference only)
Label, Cash Out, right hand
Label, Cash Out, left hand
Label, Coupon
Cash cup assembly, right hand
Cash cup assembly, left hand
Chapter 1. Core Module
3
Assembly 1: (continued)
Asm–
Index
Part
Number
–18
–18
–18B
–18C
–19
–20
41K6356
41K6355
41D7080
41D7082
41J9838
–21
1
1
1
1
1
1
–22
–23
–24
–25
–26
–27
41J9916
40M9472
–28
–28
–29
–30
–31
–32
–33
–34
41K6089
41K6090
41D9330
41K6166
41D9359
1
1
1
1
1
1
1
1
–34
–
–
–
41D7068
44D0872
44D0874
44D1125
1
1
1
1
–35
–36
–37
–
–
–
–38
–39
–40
41K6161
1
1
1
1
1
1
1
1
1
–41
–
–
–
41J9891
40N4716
41K6369
41D7073
1
1
1
1
–
–
–
–
–
41E1832
28R3559
39M5376
41K6368
1
1
1
1
–
4
Units Description
1
41D9329
41K6087
41K6120
41J9135
28R3587
28R3595
41D7775
44D0448
41J9542
41E1865
Updated October 16, 2007
1
1
1
1
1
1
Cash cup, left hand
Cash cup, right hand
Detector, cash cup
Emitter, cash cup
Sensor card, cash cup
Countertop. See “Assembly 18: Countertop” on page 44 for a complete listing of
available countertops.
Signature capture device. See “Assembly 19: Signature Capture and Coupon
Acceptor” on page 46 for a complete listing of signature capture parts.
Proximity sensor
Proximity sensor cable
Bill dispenser assembly. See “Assembly 2: Bill Dispenser” on page 6.
Hinge, upper hinge for right hand door (lower hinge for the left hand door)
Safe door cam lock
Safe door lock, currency lock with key. See Chapter 11, “Locks and Keys,” on page
95.
Safe door, right hand
Safe door, left hand
Hinge, lower hinge for the right hand door (upper hinge for the left hand door)
Bushing, hinge
Keylock, cabinet lock with key. See Chapter 11, “Locks and Keys,” on page 95.
Security controller
Lane PC. See “Assembly 21: Lane PC, Mouse, and Keyboard” on page 50.
Uninterruptible power supply, 230V/400W (BK650EI) (machines built after July 31,
2006)
Uninterruptible power supply, 115V (replaces 28R3582) (SU620)
APC RBC4 Uninterruptible power supply replacement battery (for SU620)
APC RBC5 Uninterruptible power supply replacement battery (for SU700INET)
APC RBC17 Uninterruptible power supply replacement battery (for BK650EI)
(machines built after July 31, 2006)
Customer or basket shelf
Sensormatic Scan Max Pro controller (shown for reference only)
Power strip, 5 Outlet, IEC320 (International, not US and Canada)
Power strip, 115V, US, Canada, 8 outlet (not shown)
Power strip IEC320 C-14 to 5 EU1-16R, French
Power strip, IEC 60320 C-14 to 5 UK-13R
Filter/power box
Cover plate, lane light
Cassette Coin dispenser. See “Assembly 9: Coin Dispensers” on page 20 for a
complete listing of coin dispenser parts.
Bracket for vacuum florescent (VF) display (for some fiscal printers)
3.8m Printer USB cable (not shown)
PC Audio cable (not shown)
Cable, 6 foot, DB9, male/female, used for uninterruptible power supply data (not
shown)
Power strip mounting plate (not shown)
Power jumper cord, IEC 60320 C-14 to NEMA 5-15R (not shown)
Power jumper cord, IEC320, 2-0M
Power supply, Security controller (not shown)
See Appendix A, “Cabinet Parts and Sensors,” on page 105 for available
cabinet FRUs.
See Chapter 10, “Cables,” on page 89 for additional cable FRUs.
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 1. Core Module
5
Updated October 16, 2007
Assembly 2: Bill Dispenser
2
1
3a
3
11
4
5
6
7
10
9
8
6
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 2: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
2–
–1
–2
–3
–3A
–4
–5
–6
–7
41E1866
41K6318
41K6319
41D7135
41D7137
41D7139
41D7213
41D7053
1
1
1
1
1
1
1
1
–8
–9
–10
–11
–
–
41D7215
41K6398
41K6399
41D8199
41D7123
41D7127
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Bracket assembly, bill dispenser presenter mounting
Mount, bill dispenser (remains in cabinet)
Presenter, bill dispenser
Sensor prism, presenter
Gear train, presenter gears
Presenter sensor plate
Bill dispenser, universal, 2 bin
Cartridge, universal, bill dispenser (includes configuration instructions and labels for
each currency). See “Assembly 7: Bill Dispenser Cassette” on page 16 for
additional component details.
Additional denomination module
Slide assembly, bill dispenser (with counter weight)
Mount parts, bill dispenser (pivot, screws, latch spring)
Set screw, bill dispenser presenter mount
Presenter unit cable assembly (not shown)
Presenter unit exit sensor (not shown)
Chapter 1. Core Module
7
Updated October 16, 2007
Assembly 3: Bill Dispenser Main Unit Illustration 1 of 3
1
1
5
2
2
4
3
4
8
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 3: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
3–
–1
41K6289
1
–2
–3
–4
41D7119
41K6303
41K6290
1
1
1
–5
41D7133
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Timing kit, main unit channel 1 (includes 1 gear pulley, 2 retaining rings, 1 spring, 1
timing belt)
Timing kit, intermodule (includes 1 timing belt, 1 washer, 1 screw, 1 pulley)
Main/lower unit interconnect (includes 1 gear, 1 pin, 1 retainer E ring)
Timing kit, main unit channel 2 (includes 1 gear pulley, 2 retaining rings, 1 spring, 1
timing belt)
Reject bin
Chapter 1. Core Module
9
Updated October 16, 2007
Assembly 4: Bill Dispenser Main Unit Illustration 2 of 3
1
1
1
10
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 4: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
4–
–1
41D7105
Units Description
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
1 Scraper kit (includes 1 large and 1 small scraper, 2 screws (1 for each scraper)
Chapter 1. Core Module
11
Updated October 16, 2007
Assembly 5: Bill Dispenser Main Unit Illustration 3 of 3
3
2
1
3
2
9
8
7
6
4
4
5
12
4
4
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 5: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
5–
–1
1
–2
–3
41D7103
41D7107
1
1
–4
–5
–6
–7
–8
–9
–9
41D7563
41D7125
41D7113
41D7111
41D7109
04G5389
41D7610
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Printed circuit board (reed switch type, sometimes referred to as a PCB) - not
serviceable (replace the bill dispenser assembly)
Thickness sensor (includes 1 sensor, 2 screws, 1 shaft, 1 retaining ring)
Solenoid kit (includes 1 solenoid, 3 screws, 3 retaining rings, 1 spring, 1 shaft, 1
MG arm)
Bill dispenser sensor kit (includes 2 sensors, 2 screws)
Cassette sensor, bill dispenser
Cable, CAU 2 Main unit controlled access unit
Cable, CAU 1 Main unit
Printed circuit board (main unit, sometimes referred to as a PCB)
Battery, Lithium
Battery, Lithium bill dispenser (machines built after July 31, 2006)
Chapter 1. Core Module
13
Updated October 16, 2007
Assembly 6: Bill Dispenser Lower Unit
9
1
9
9
8
2
4
3
7
6
5
14
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 6: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
6–
–1
–2
–3
–4
–5
–6
–7
–8
–9
41K6308
41K6306
41D7217
41K6307
41D7121
41D7563
41D7125
41K6309
41K6291
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Lower unit timing belt
Lower unit gear 20 kit (includes 1 pin, 1 gear, 2 retaining E rings)
Lower unit gear 34 kit (includes 1 pin, 1 gear, 1 retaining E ring)
Lower unit gear 54 kit (includes 1 gear, 1 retaining ring)
Lower unit gear 44 kit (includes 1 pin, 1 gear, 1 retaining ring)
Bill dispenser sensor kit. See 5–4 on page 13.
Cassette sensor, bill dispenser
Cable assembly, lower unit
Timing kit, lower unit (includes 1 gear pulley, 2 retaining rings, 1 spring, 1 timing
belt)
Chapter 1. Core Module
15
Updated October 16, 2007
Assembly 7: Bill Dispenser Cassette
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9
1
1
1
4
5
8
7
5
2
3
6
2
3
3
3
3
16
3
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 7: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
7–
–
–1
41D7053
41D7115
1
1
–2
–3
41K6298
41D7117
1
1
–4
–5
–6
–7
–7
–7
–7
–8
–9
–
41K6300
41K6301
41D7131
42K0061
42K0062
42K0063
42K0064
41K6322
44M1840
41D7129
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Cassette, universal bill dispenser
Pick roller kit (includes 1 passway, 1 spacer, 2 shaft assemblies, 2 pulleys, 2
one-way rollers, 3 gears, 2 rollers, 2 bearings, 1 timing belt, 2 screws, 2 nuts)
Cassette pressure plate kit (includes 1 pressure plate, 1 spring, 1 rubber sheet)
Cassette currency rails kit (includes 2 adjuster S, 4 leaf springs, 1 adjuster R, 4
screws, 1 rear pressure, 1 spring, 1 rubber sheet)
Cassette handle
Cassette magnets (package of 2)
Cassette prism
Cassette label "1" (not shown)
Cassette label "5" (not shown)
Cassette label "10" (not shown)
Cassette label "20" (not shown)
Cassette latching hook
Cassette latch
Low note sensor
Chapter 1. Core Module
17
Updated October 16, 2007
Assembly 8: Bill Dispenser Communications and Power
1
18
2
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
3
Assembly 8: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
8–
–1
39M5374
1
–2
–3
–
40M9400
41K6080
40N5606
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
1.0m power jumper cord (Uninterruptible power supply to Controller Uninterruptible
power supply In)
Cable, bill dispenser data
Power dongle, 24V
Power adapter (power supply), 24V (not shown) (machines built after July 31, 2006)
Chapter 1. Core Module
19
Updated October 16, 2007
Assembly 9: Coin Dispensers
20
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 9: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
9–
–
–
–
–
41D7047
44D1294
41D7043
41D7045
1
1
1
1
–
41D7051
1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–2
–2
–3
–4
–4
–5
–5
–6
–6
–8
–9
–9
–9
–9
–9
–9
–9
–9
–9
–9
–9
–9
–9
41J7615
41J7616
41J7617
41J7618
41J7619
41J7620
41J7621
41J7622
41J7623
41J7624
41J7625
41J7626
41J7627
41J7628
41J7629
41J7630
41J7631
41J7632
41J7633
41J7634
41K6082
41K6086
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
41D7076
41D7078
41K6363
41K6364
41D7813
41D7815
41K6088
41J7638
41J7639
41J7640
41J7641
41J7642
41J7643
41J7644
41J7645
41J7646
41J7648
41J7649
44D1296
41J7651
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Hopper coin dispenser, UK (includes assembly index # 1 ,9, 10, 11 and the base)
Hopper coin dispenser, Euro (includes assembly index # 1 ,9, 10, 11 and the base)
Hopper coin dispenser, US (includes assembly index # 1 ,9, 10, 11 and the base)
Hopper coin dispenser, Canada (includes assembly index # 1 ,9, 10, 11 and the
base)
Hopper coin dispenser, Australia (includes assembly index # 1 ,9, 10, 11 and the
base)
Hopper, coin dispenser, US/Canada .01
Hopper, coin dispenser, US/Canada .05
Hopper, coin dispenser, US/Canada .10
Hopper, coin dispenser, US/Canada .25
Hopper, coin dispenser, US/Canada 1.00
Hopper, coin dispenser, Canada 2.00
Hopper, coin dispenser, UK .01
Hopper, coin dispenser, UK .02
Hopper, coin dispenser, UK .05
Hopper, coin dispenser, UK .10
Hopper, coin dispenser, UK .20
Hopper, coin dispenser, UK 1.00
Hopper, coin dispenser, Euro .01
Hopper, coin dispenser, Euro .02
Hopper, coin dispenser, Euro .05
Hopper, coin dispenser, Euro .10
Hopper, coin dispenser, Euro .20
Hopper, coin dispenser, Euro .50
Hopper, coin dispenser, Euro 1.00
Hopper, coin dispenser, Euro 2.00
Hopper mount assembly, right hand (includes slide rails)
Hopper mount assembly, left hand (includes slide rails)
Keylock. See Chapter 11, “Locks and Keys,” on page 95.
Reject plate, coin, right hand
Reject plate, coin, left hand
Chute, coin, right hand, for both hopper and cassette coin dispensers
Chute, coin, left hand, for both hopper and cassette coin dispensers
Upper coin chute assembly, right hand
Upper coin chute assembly, left hand
Lock, cam
Hopper coin dispenser rotor, US/Canada .01
Hopper coin dispenser rotor, US/Canada .05
Hopper coin dispenser rotor, US/Canada .10
Hopper coin dispenser rotor, US .25, UK .10
Hopper coin dispenser rotor, US/Canada 1.00
Hopper coin dispenser rotor, Canada 2.00
Hopper coin dispenser rotor, UK .01
Hopper coin dispenser rotor, UK .02
Hopper coin dispenser rotor, UK .05
Hopper coin dispenser rotor, UK .20 Euro .05
Hopper coin dispenser rotor, UK 1.00
Hopper coin dispenser rotor, Euro .01
Hopper coin dispenser rotor, Euro .02/.10
Chapter 1. Core Module
21
Assembly 9: (continued)
Asm–
Index
Part
Number
–9
–9
–10
–11
41J7654
41J7655
41J7658
41J7659
1
1
1
1
–13
–14
41K6353
41K6077
1
1
–14
41K7207
1
–14
41K7208
1
–14
41K7209
1
–14
41K7210
1
–14
41K7211
1
–15
–15
–15
–15
–15
–16
–17
28R3678
28R3679
28R3680
28R5399
28R5466
41D8231
41D8229
1
1
1
1
1
1
1
–18
–18
–
–
–
–
–
–
–
–
41D8060
41D8062
41D7403
41D7404
41K6352
39M5377
39M5081
41J7635
41J7636
41J7637
1
1
1
1
1
1
1
1
1
1
22
Updated October 16, 2007
Units Description
Hopper coin dispenser rotor, Euro .20/1.00
Hopper coin dispenser rotor, Euro .50/2.00
Hopper coin dispenser bin, clear
Hopper coin dispenser bin cover kit (includes cover body, label set for US, UK,
Euro
Coin dispenser stand
Coin dispenser with cable and power supply (does not include cartridge/cassette)
(unconfigured)
Coin dispenser with cable and power supply (does not include cartridge/cassette),
US
Coin dispenser with cable and power supply (does not include cartridge/cassette),
Canada
Coin dispenser with cable and power supply (does not include cartridge/cassette),
Euro
Coin dispenser with cable and power supply (does not include cartridge/cassette),
Australia
Coin dispenser with cable and power supply (does not include cartridge/cassette),
UK
Cassette, coin, Canada
Cassette, coin, Euro
Cassette, coin, Australia
Cassette, coin, UK
Cassette, coin, US
Corner plug, coin dispenser (used to block loading of coins in one or more stacks)
Wing clip, coin dispenser cassette (used to block dispensing of coins from one or
more stacks)
Coin cassette deflector, right hand
Coin cassette deflector, left hand
Power supply, cassette coin dispenser, 32 VDC (not shown)
Power supply, hopper coin dispenser, 24 VDC (not shown)
Coin dispenser signal cable for both hopper and cassette dispensers (not shown)
Power jumper cord, UK, EURO, Australia (not shown)
Power jumper cord , US, Canada (not shown)
Cable harness, position 1,2, and 3, hopper coin dispenser (not shown)
Cable harness, position 4,5, and 6 hopper coin dispenser (not shown)
Card assembly, hopper coin dispenser (not shown)
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 1. Core Module
23
Updated October 16, 2007
Assembly 10: Coin Acceptor
2
1
3
4
5
6
7
8
9
10
24
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 10: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
10–
–1
41D9345
1
–1
41D8051
1
–1
–1
41J6735
41D9347
1
1
–1
–1
41J6736
41D9346
1
1
–1
–1
41J6737
41D9348
1
1
–1
–1
41J6738
41D9349
1
1
–1
–2
–3
–4
–4
–5
–5
–6
–7
–7
–8
–8
–9
–10
–10
–
–
–
41J6739
41J8231
28R3292
42K0052
42K0053
42K0355
42K0359
41K6593
41J8076
42K0058
44D0245
44D0246
41K6160
41K6363
41K6364
28R5566
41K6354
41K6359
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Coin Acceptor, MEI CF9520, US, with side reject plate (part 10–2) (machines built
after July 31, 2006)
Coin Acceptor MEI, CF9520, US, rejects $0.01, with side reject plate (part 10–2)
(machines built after July 31, 2006)
Coin Acceptor MEI, CF9520, US, with side reject plate (part 10–2)
Coin Acceptor, MEI CF9520, UK, with side reject plate (part 10–2) (machines built
after July 31, 2006)
Coin Acceptor MEI, CF9520, UK, with side reject plate (part 10–2)
Coin Acceptor, MEI CF9520, Canada, with side reject plate (part 10–2) (machines
built after July 31, 2006)
Coin Acceptor, Canada, with side reject plate (part 10–2)
Coin Acceptor, MEI CF9520, Euro, with side reject plate (part 10–2) (machines built
after July 31, 2006)
Coin Acceptor, Euro, with side reject plate (part 10–2)
Coin Acceptor, MEI CF9520, Australian, with side reject plate (part 10–2) (machines
built after July 31, 2006)
Coin Acceptor, MEI CF9520, Australian, with side reject plate (part 10–2)
Coin acceptor side reject plate
Coin acceptor mounting plate
Cash acceptance bezel, right hand
Cash acceptance bezel, left hand
Label, cash in, right hand
Label, cash in, left hand
Shaft, cash acceptance bezel
Coin deflector, right hand
Coin deflector, left hand
Coin tray guide, right hand
Coin tray guide, left hand
Coin tray
Chute, coin RH
Chute, coin LH
Ferrite core (installed on signal cable)
Coin acceptor cable, US/Canada (not shown)
Coin acceptor cable, EMEA/Australia (not shown)
Chapter 1. Core Module
25
Updated October 16, 2007
Assembly 11: Bill Acceptor
2
3
1
7
6
4
5
26
8
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 11: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
11–
–
–
–
–
–
–
–
–1
41J9330
41D7250
40M9343
41D7254
41E1449
40M9341
40M9342
44D0258
1
–2
–2
–2
–2
–2
–2
–3
41D7249
41D7252
41D9700
41D9701
41D9702
41D9703
41D7251
1
1
1
1
1
1
1
–3
41D7253
1
–4
–5
–6
–7
–8
41D7248
28R3684
41K6109
44D0260
44D0262
1
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Mars SC6607R bill acceptor, US
Mars SC6607R bill acceptor, US (machines built after July 31, 2006)
Mars SC6607R bill acceptor, Australian firmware
Mars SC8307R bill acceptor, Euro, UK
Mars SC8307R bill acceptor, Canadian firmware
Mars SC8307R bill acceptor, UK firmware
Mars SC8307R bill acceptor, Euro firmware
Chassis with connector cables, Mars SC bill acceptor (does not include 11–6 or
11–7)
Head, Mars SC6607R bill acceptor, US, Australia (replaces 41J9486)
Head, Mars SC8307R bill acceptor, UK, Euro, Canada
Head, Mars SC8307R bill acceptor, Canadian firmware
Head, Mars SC8307R bill acceptor, UK firmware
Head, Mars SC8307R bill acceptor, Euro firmware
Head, Mars SC6607R bill acceptor, Australian firmware
Universal bezel with gap filler, Mars SC6607R bill acceptor, US, Australia (replaces
28R3477)
Universal bezel with gap filler, Mars SC8307R bill acceptor, UK, Euro, Canada
(replaces 28R5028)
Cash Box, Mars SC bill acceptors (replaces 28R3492)
Mars SC bill acceptor data cable
Bill acceptor mounting bracket
Interface card, MEI SC series bill acceptor
Edge connector, MEI SC series bill acceptor
Chapter 1. Core Module
27
Updated October 16, 2007
Assembly 12: Printers TIx and TGx
5
2
3
6
4
7
1
8
9
10
28
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 12: (continued)
Updated October 16, 2007
Asm–
Index
12–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
Part
Number
Units Description
–
41D9648
Printer, left hand iron gray
Printer shelf, TI and TG, left hand, iron gray
Hole cover, round, iron gray
Hole cover, oval, iron gray
Rivet, black push in
Printer, Catalina, back cover, iron gray
Printer, Catalina, left hand auxiliary mounting bracket iron gray (used with 41J9442)
Printer, Catalina, mounting bracket, iron gray (used with 41J9438)
Locking bracket, iron gray
Catalina Printer (customer furnished)
TI/TG Printer. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
1 Printer, Catalina, support bracket, left hand, iron gray
–
–1
–2
–3
–4
–5
–6
41J9444
41J9772
41J9459
41J8807
41J9449
41J9440
1
1
1
1
1
1
–7
–8
–9
–10
41J9454
41J9418
1
1
1
1
–
41D9650
1
–
–1
–2
–3
–4
–5
–6
41J9465
41J9770
41J9457
41J8809
41J9447
41J9461
1
1
1
1
1
1
–7
–8
–9
–10
41J9452
41J9416
1
1
1
1
–
41D9642
1
–
–1
–2
–3
–4
–5
–6
41J9467
41J9772
41J9459
41J8807
41J9449
41J9463
1
1
1
1
1
1
–7
41J9454
41J9442
41J9770
41J9457
41J8809
41J9447
41J9438
41J9452
41J9416
1
1
1
1
1
1
1
1
1
1
Printer, left hand pearl white
Printer shelf, TI and TG, left hand, pearl white
Hole cover, round, pearl white
Hole cover, oval, pearl white
Rivet, off white push in
Printer, Catalina, back cover, pearl white
Printer, Catalina, left hand auxiliary mounting bracket pearl white (used with
41J9444)
Printer, Catalina, mounting bracket pearl white (used with 41J9440)
Locking bracket, pearl white
Catalina Printer (customer furnished)
TI/TG Printer. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
Printer, Catalina, support bracket, left hand, pearl white
Printer, right hand iron gray
Printer shelf, TI and TG, right hand, iron gray
Hole cover, round, iron gray
Hole cover, oval, iron gray
Rivet, black push in
Printer, Catalina, back cover, iron gray
Printer, Catalina, right hand auxiliary mounting bracket iron gray (used with
41J9465)
Printer, Catalina, mounting bracket, iron gray (used with 41J9461)
Locking bracket, iron gray
Catalina Printer (customer furnished)
TI/TG Printer. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
Printer, Catalina, support bracket, right hand, iron gray
Printer, right hand pearl white
Printer shelf, TI and TG, right hand, pearl white
Hole cover, round, pearl white
Hole cover, oval, pearl white
Rivet, off white push in
Printer, Catalina, back cover, pearl white
Printer, Catalina, right hand auxiliary mounting bracket pearl white (used with
41J9467)
1 Printer, Catalina, mounting bracket pearl white (used with 41J9467)
Chapter 1. Core Module
29
Assembly 12: (continued)
Asm–
Index
Part
Number
–8
–9
–10
41J9418
–
41D9644
30
Updated October 16, 2007
Units Description
1 Locking bracket, pearl white
1 Catalina Printer (customer furnished)
1 TI/TG Printer. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
1 Printer, Catalina, support bracket, right hand, pearl white
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 1. Core Module
31
Updated October 16, 2007
Assembly 13: Printers TF6 and TM6
1
3
2
10
4
9
4
8
5
7
4
6
32
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 13: (continued)
Updated October 16, 2007
Asm–
Index
13–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–
–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–
–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–
–
–1
–2
–3
–4
–5
–6
–7
–8
–9
Part
Number
41J9452
41J9533
41J9457
Units Description
1
1
1
1
1
41J9513
41J8809
41J9538
41J9770
41J9523
41D9653
1
1
1
1
1
1
41J9454
41J9535
1
1
1
1
1
41J9459
41J9515
41J8807
41J9540
41J9772
41J9525
41D9655
1
1
1
1
1
1
41J9452
41J9533
1
1
1
1
1
41J9457
41J9518
41J8809
41J9538
41J9770
41J9528
41D9653
1
1
1
1
1
1
41J9454
41J9535
1
1
1
1
1
41J9459
41J9520
41J8807
41J9540
41J9772
1
1
1
1
Printer, right hand iron gray
Bracket, mounting Catalina printer, iron gray
Mounting bracket Catalina printer, right hand, iron gray (used with 41J9523)
Catalina printer (customer furnished)
Hole cover, oval, iron gray
Printer, TF6 and TM6. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
Printer shelf, 4610-TF6/TM6, right hand, iron gray
Rivet, black push in
Back cover, Catalina printer, iron gray (used with 41J9513)
Hole cover, round, iron gray
Auxiliary mount bracket Catalina printer, right hand, iron gray (used with 41J9513)
Support bracket Catalina printer, iron gray
Printer, right hand pearl white
Bracket, mounting Catalina printer, pearl white
Mounting bracket Catalina printer, right hand, pearl white (used with 41J9525)
Catalina printer (customer furnished)
Hole cover, oval, pearl white
Printer, TF6 and TM6. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
Printer shelf, 4610-TF6/TM6, right hand pearl white
Rivet, off white push in
Back cover, Catalina printer, pearl white (used with 41J9515)
Hole cover, round, pearl white
Auxiliary mount bracket Catalina printer, right hand, pearl white (used with 41J9515)
Support bracket, Catalina printer, pearl white
Printer, left hand iron gray
Bracket, mounting Catalina printer, iron gray
Mounting bracket Catalina printer, left hand, iron gray (used with 41J9528)
Catalina printer (customer furnished)
Hole cover, oval, iron gray
Printer, TF6 and TM6. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
Printer shelf, 4610-TF6/TM6, left hand iron gray
Rivet, black push in
Back cover, Catalina printer, iron gray (used with 41J9518)
Hole cover, round, iron gray
Auxiliary mount bracket Catalina printer, left hand, iron gray (used with 41J9518)
Support bracket Catalina printer, iron gray
Printer, left hand pearl white
Bracket, mounting Catalina printer, pearl white
Mounting bracket Catalina printer, left hand, pearl white (used with 41J9530)
Catalina printer (customer furnished)
Hole cover, oval, pearl white
Printers, TF6 and TM6. See IBM 4610 SureMark Printers Hardware Service
Manual, GY27-0355.
Printer shelf, 4610-TF6/TM6, left hand pearl white
Rivet, off white push in
Back cover, Catalina printer, pearl white (used with 41J9520)
Hole cover, round, pearl white
Chapter 1. Core Module
33
Assembly 13: (continued)
Asm–
Index
Part
Number
–10
–
41J9530
41D9655
34
Updated October 16, 2007
Units Description
1 Auxiliary mount bracket Catalina printer, left hand, pearl white (used with 41J9520)
1 Support bracket, Catalina printer, pearl white
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 1. Core Module
35
Updated October 16, 2007
Assembly 14: Printers Fiscal
1
2
9
8
7
36
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
3
4
5
6
Assembly 14: (continued)
Updated October 16, 2007
Asm–
Index
|
14–
–1
–2
–3
–4
–5
–6
–7
–8
–9
|
–
–1
–2
–3
–4
–5
–6
–7
–8
–9
Part
Number
41J9666
41J9459
41J8807
41J9454
41J9463
41J9449
41J9418
41J9670
41J9459
41J8807
41J9454
41J9440
41J9449
41J9418
Units Description
Printer, right hand pearl white
Printer shelf, Fiscal, right hand pearl white (Models 152, 602, and 612)
Hole cover, oval, pearl white
Rivet, off white push in nylon
Bracket, mounting Catalina printer, pearl white (used with 41J9463)
Auxiliary mount bracket Catalina printer, right hand, pearl white (used with 41J9666)
Printer, Catalina, back cover, pearl white
Catalina printer (customer furnished)
Fiscal printer. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
1 Locking bracket, pearl white
1
1
1
1
1
1
1
1
Printer, left hand pearl white
Printer shelf, Fiscal, left hand pearl white (Models 152, 602, and 612)
Hole cover, oval, pearl white
Rivet, off white push in nylon
Bracket, mounting Catalina printer, pearl white (used with 41J9440)
Auxiliary mount bracket Catalina printer, left hand, pearl white (used with 41J9670)
Printer, Catalina, back cover, pearl white
Catalina printer (customer furnished)
Fiscal printer. See IBM 4610 SureMark Printers Hardware Service Manual,
GY27-0355.
1 Locking bracket, pearl white
1
1
1
1
1
1
1
1
Chapter 1. Core Module
37
Updated October 16, 2007
Assembly 15: Printers Epson
2
1
3
4
5
7
6
38
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 15: (continued)
Updated October 16, 2007
Asm–
Index
15–
–1
–2
–3
–4
–5
–
–6
–7
–
–1
–2
–3
–4
–5
–
–6
–7
Part
Number
Units Description
44D0252
44D0361
44D0256
44D0254
44D0381
44D0922
1
1
1
1
1
1
1
1
Printer, iron gray
Printer support bracket, iron gray
Support bracket for Catalina printer, iron gray
Cable cover for Catalina printer, iron gray
Auxiliary support bracket Catalina printer, iron gray
Paper diverter, Epson printer
Mount adapter plate, Epson printer, iron gray
Epson printer (customer furnished)
Catalina printer (customer furnished)
41D8573
44D0359
41D8579
41D8576
44D0381
44D0920
1
1
1
1
1
1
1
1
Printer, pearl white
Printer support bracket, pearl white
Support bracket for Catalina printer, pearl white
Cable cover for Catalina printer, pearl white
Auxiliary support bracket Catalina printer, pearl white
Paper diverter, Epson printer
Mount adapter plate, Epson printer, pearl white
Epson printer (customer furnished)
Catalina printer (customer furnished)
Chapter 1. Core Module
39
Updated October 16, 2007
Assembly 16: Magnetic stripe reader and pin pad mount
1
3
4
5
2
8
6
10
14
18
40
9
7
13
12
11
16
15
19
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
17
20
Assembly 16: (continued)
Updated October 16, 2007
|
|
Asm–
Index
Part
Number
16–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–11
41J8883
41J9662
41J9660
41D7155
41D7156
41J7193
41D7246
41D7586
41D7680
41D8391
41D7767
1
1
1
1
1
1
1
1
1
1
1
–12
–13
–14
–
41J9157
41J9154
41D8143
41J9765
1
1
1
1
–15
–16
–17
–18
–19
–20
–
–
–
41D7142
41D7144
41D7061
41D7634
41D9876
44D0347
41D7595
41D7588
41D7169
1
1
1
1
1
1
1
1
1
Units Description
Magnetic stripe reader bracket, Verifone Omni 7000
Magnetic stripe reader shield, Ingenico 3500
Magnetic stripe reader bracket, Ingenico 3500
Bracket, Ingenico 6550 pin pad mounting
Bracket, Ingenico 6770 pin pad mounting
Magnetic stripe reader bracket, Banksys C-Zam Smash
Magnetic stripe reader bracket, Ingenico 3300
Mount, Checkmate 2001 pin pad
Mount, Wymix pin pad
Mount, Verifone OMNI 7000 pin pad (left hand)
Mount,
Verifone OMNI 490
Hypercom L4100
Verifone TT8800
Magnetic stripe reader mount bracket w/tilt assembly, Ingenico 6550
Magnetic stripe reader mount bracket assembly, Ingenico Entouch 1000
Magnetic stripe reader mounting bracket assembly Moneyline L3000
Magnetic stripe reader washer, Ingenico 3500 (not shown) (Models 152, 602, and
612)
Mounting bracket, Verifone Everest Plus (right hand)
Mounting bracket, Verifone Everest Plus (left hand)
Support bracket, Verifone MX870 pin pad
Support bracket, Hypercom 5500
Mount, Verifone Omni 7000MPD pin pad (right hand)
Mount, Verifone Omni 7000MPD pin pad (left hand)
Cable cover, Verifone and Checkmate mount (not shown)
Mount bracket Checkmate 2001 pin pad (not shown)
Bracket, locking for Wymix pin pad (not shown)
Chapter 1. Core Module
41
Updated October 16, 2007
Assembly 17: Hand held scanner
1B
1A
2
42
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 17: (continued)
Updated October 16, 2007
|
|
|
|
Asm–
Index
Part
Number
17–
41D7242
–
41D9435
–1A
–1B
–2
–2
–2
–2
–2
–2
–2
–2
–
44D0241
44D0243
41J9812
41J9817
41D8445
41D8448
41D1011
41D1015
41D1013
41D1017
41D8449
Units Description
1 Bracket for hand held scanner, pearl white (mounts to lane light bustle - Models
153, 603, and 613 only)
1 Bracket for hand held scanner, iron gray (mounts to lane light bustle - Models 153,
603, and 613 only)
1 Bracket, hand held scanner
1 Bracket, hand held scanner
1 Bracket, hand held scanner, right hand, silver
1 Bracket, hand held scanner, left hand, silver
1 Bracket, hand held scanner, right hand, Formica white
1 Bracket, hand held scanner, left hand, Formica white
1 Bracket, hand held scanner, right hand, iron gray
1 Bracket, hand held scanner, left hand, iron gray
1 Bracket, hand held scanner, right hand, pearl white
1 Bracket, hand held scanner, left hand, pearl white
1 Hole plate with strain relief for hand held scanner cable (not shown)
Chapter 1. Core Module
43
Updated October 16, 2007
Assembly 18: Countertop
10
1
2
11
12
3
4
13
14
5
6
15
7
16
17
8
9
44
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
18
Assembly 18: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
18–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–11
–12
–13
–14
–15
–16
–17
–18
41E1858
41J6747
41E1861
41J6746
41D8628
41D7161
41D9626
41J7533
41J6745
41J6749
41E1859
41J6750
41E1862
41D8630
41D9628
41D7163
41J6748
41J7536
Units Description
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Countertop with signature capture, right hand
Countertop, with signature capture, right hand
Countertop, no signature capture, right hand
Countertop, no signature capture, right hand
Countertop, no signature capture, no coupon, right hand
Countertop, cashless with signature capture, right hand
Countertop, cashless with signature capture, right hand
Countertop, cashless with no signature capture, right hand
Countertop, cashless with no signature capture, right hand
Countertop, with signature capture, left hand
Countertop, with signature capture, left hand
Countertop, no signature capture, left hand
Countertop, no signature capture, left hand
Countertop, no signature capture, no coupon, left hand
Countertop, cashless with signature capture, left hand
Countertop, cashless with signature capture, left hand
Countertop, cashless with no signature capture, left hand
Countertop, cashless with no signature capture, left hand
Chapter 1. Core Module
45
Updated October 16, 2007
Assembly 19: Signature Capture and Coupon Acceptor
15
14
1
2
13
12
11
3
10
9
4
5
6
7
8
46
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 19: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
19–
–
44D1022
1
–
44D1023
1
–
44D1130
1
–
44D1131
1
–1
41D9560
1
–1
–1
44D0750
44D0987
1
1
–
–
–
–2
–3
–3
–4
–5
–5
–
–
–6
–7
–8
–9
–10
–11
–12
–13
–14
–15
–
–
–
44D0989
44D0991
44D1161
41K6576
44M1901
44M1902
41D8114
41E1854
41E1855
41E1863
41E1864
41E1829
41J7798
41J9289
41K6367
42K0358
42K0357
44D1337
41J7094
41J7093
41D9561
41E1830
41E1831
41D1337
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Signature capture assembly (right hand) with non-active stylus (also includes
bracket, retainer, hex L key)
Signature capture assembly (left hand) with non-active stylus (also includes
bracket, retainer, hex L key)
Signature capture assembly (left hand) with active stylus (also includes bracket,
retainer, hex L key)
Signature capture assembly (right hand) with active stylus (also includes bracket,
retainer, hex L key)
Active stylus (includes stylus collar 19–15, O ring 19–, split ring 19–, and hex L key
19–)
Non active stylus (includes stylus collar 19–15)
Non active stylus (includes stylus collar 19–15, O ring 19–, split ring 19–, and hex L
key 19–)
#60 O ring (not shown)
#7 fine split ring (not shown)
M0.9 hex L key (not shown)
Clip, signature capture
Signature capture bezel, right hand
Signature capture bezel, left hand
Signature capture device
Signature capture bracket, right hand
Signature capture bracket, left hand
Filler plate, no signature capture bracket, right hand (not shown)
Filler plate, no signature capture bracket, left hand (not shown)
Coupon mounting plate
Coupon emitter/detector assembly
6 in. RJ11 coupon patch cable
Coupon indicator assembly
Label, coupon
Label, signature
3/8 in. black nylon hole plug
Signature capture stylus retractor and collar
Signature capture stylus retractor bracket
Stylus collar
Coupon indicator cable from coupon box to the LED (not shown)
Coupon cable from the coupon box to the security controller (not shown)
3/8 in. black nylon hole plug
Chapter 1. Core Module
47
Updated October 16, 2007
Assembly 20: Lane light and transaction light
1
2
48
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 20: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
20–
|
|
|
|
|
|
–1
–
–
–
–
–
41K6371
41D7426
41D7424
41D7428
41D7430
41D8557
1
1
1
1
1
1
–
–
41D8555
41J8193
1
1
–
41J8194
1
–
41J8195
1
–
–
–
–
–
–2
–2
–2
–2
–
–
44D1232
41D8054
41D7557
41E1865
41D7656
41D7704
41D7706
41D7977
44D0421
41D8056
44M1884
1
1
1
1
1
1
1
1
1
1
1
–
44M1886
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Lane light, with transaction light (English)
Lane light, with transaction light (No text on globe)
Lane light with transaction light (French, Dutch) Carrefour
Lane light (Haggen ″Self Scan″) (top food banner)
Lane light (Haggen ″Self Scan/ 12 items or less″) (top food banner)
Lane light assembly, Haggen (Haggen Banner only) ″Self Scan / 12 Item or Less″
Models 153, 603, and 613
Lane light assembly, Haggen (Haggen Banner) ″Self Scan″
Lane light with transaction awareness light assembly, Carrefour, Belgium (French
only)
Lane light with transaction awareness light assembly, Carrefour, Belgium (Dutch
only)
Lane light with transaction awareness light assembly, Carrefour, Belgium
(German/French)
Lane light with 2-tier transaction awareness light assembly and 400mm pole
Cable, lane light power adapter
Lens, red transaction light
Cover plate, lane light (used when no lane light is present)
Bulb 12 Vdc, transaction light
Transaction awareness light, 2-tier
Transaction awareness light, 3-tier
Transaction awareness light, 3-tier, Carrefour France (green, red, amber)
Transaction awareness light, 3-tier, Costco
Cable, transaction awareness light
Lane light mounting clamp (not shown, used when lane light is mounted on Models
152, 602, and 612 bagging module)
Lane light mounting strap (not shown, used when lane light is mounted on Models
152, 602, and 612 bagging module)
Chapter 1. Core Module
49
Updated October 16, 2007
Assembly 21: Lane PC, Mouse, and Keyboard
1
3
2
50
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 21: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
21–
–1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–2
–3
–
1
32N1205
32N1206
32N1207
32N1208
32N1209
32N1210
32N1216
32N1218
32N1220
32N1224
32N1236
10N9421
10N9422
10N9428
10N9431
10N9432
10N9434
10N9435
10N9437
10N9439
10N9440
10N9441
03N6669
41D7596
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Lane PC, IBM 4800-742 MFI. Refer to IBM 4800 SurePOS 720, 740, and 780
Hardware Service Guide, SA27-4329 for lane PC information.
Keyboard, Black, US English USB, #103P, PS/2 key layout, 3m cable
Keyboard, Black, French USB, #189, PS/2 key layout, 3m cable
Keyboard, Black, Italian USB, #142, PS/2 key layout, 3m cable
Keyboard, Black, German/Austrian USB, #129, PS/2 key layout, 3m cable
Keyboard, Black, UK English USB, #166, PS/2 key layout, 3m cable
Keyboard, Black, Spanish USB, #172, PS/2 key layout, 3m cable
Keyboard, Black, French Canadian USB, #445, PS/2 key layout, 3m cable
Keyboard, Black, Belgian/UK, #120, USB, PS/2 key layout, 3m cable
Keyboard, Black, Danish USB, #159, PS/2 key layout, 3m cable
Keyboard, Black, Dutch USB, #143, PS/2 key layout, 3m cable
Keyboard, Black, Slovenian USB, #234, PS/2 key layout, 3m cable
Keyboard, Black, Brazilian Portuguese USB, #275, PS/2 key layout, 3m cable
Keyboard, Black, Hungarian USB, #208, PS/2 key layout, 3m cable
Keyboard, Black, Swedish/Finnish USB, #153, PS/2 key layout, 3m cable
Keyboard, Black, Swiss, French/German USB, #150F/G, PS/2 key layout, 3m cable
Keyboard, Black, Norwegian USB, #155, PS/2 key layout, 3m cable
Keyboard, Black, Portuguese USB, #163, PS/2 key layout, 3m cable
Keyboard, Black, Greek USB, #319, PS/2 key layout, 3m cable
Keyboard, Black, Polish USB, #214, PS/2 key layout, 3m cable
Keyboard, Black, Czech USB, #243, PS/2 key layout, 3m cable
Keyboard, Black, Turkish USB, #179, PS/2 key layout, 3m cable
Keyboard, Black, LA Spanish USB, #171, PS/2 key layout, 3m cable
USB 3-Button mouse
HASP ISS-45 POS software key
Chapter 1. Core Module
51
Assembly 21: (continued)
52
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 2. Load Cells, Platens, Plates, and Retaining Fences
Assembly 22: Load Cell . . . . . . . . . . . . . . . . . . . . . . 54
Assembly 23: Platens and Retaining Fences . . . . . . . . . . . . . . 56
© Copyright IBM Corp. 2006, 2007
53
Updated October 16, 2007
Assembly 22: Load Cell
1
54
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 22: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
22–
|
|
|
|
|
|
|
|
|
|
–1
–1
–1
–1
–1
–
41D7448
41D7451
41D7453
41D8188
41D7622
41D7621
1
1
1
1
1
1
–
–
–
41D8291
41J6930
41J6934
4
2
2
–
–
41J7417
41D7073
2
2
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Load cell, 1 bag position (Model N54)
Load cell, Models 152, 153, 171, 602, 612, 603, 613, 800, 810 (replaces 41J8098)
Load cell, 100 KG, Models 171, 800, and 810 (for wide lane with 25 inch belt)
Load cell, Models 151, 606, and 616 Carousel
Load cell, Models 151, 606, and 616 secondary shelf
Digital carousel weighting assembly with load cells, frame, platen, cables, control
box, Models 151, 606, and 616
Screw, M6 X 55 (attaches load cell to conveyor) Models 171, 800, and 810
Adapter bar, (attaches load cell to conveyor, for wide lane with 25 inch belt)
Guide, load cell plastic, Models 171, 800, and 810 (for standard lane with 19 inch
belt)
Guide, load cell plastic, Models 171, 800, and 810 (for wide lane with 25 inch belt)
Cable, 6 foot, DB9, male/female, used for load cell extension
Chapter 2. Load Cells, Platens, Plates, and Retaining Fences
55
Updated October 16, 2007
Assembly 23: Platens and Retaining Fences
1
2
4
5
7
56
3
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
6
Assembly 23: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
23–
|
|
|
|
|
|
|
|
|
|
|
|
–1
–
–2
41D7323
41D7324
41D7636
1
1
1
–
–3
–
–4
–
–
–5
–6
41D8184
41D7635
41D9327
41J9748
1
1
1
1
41D8196
41D7667
41D7669
1
1
1
–7
41D7671
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Flat platen with 2 bag hole pattern, right hand, Models 152, 602, and 612
Flat platen with 2 bag hole pattern, left hand, Models 152, 602, and 612
Platen for Models 153, 603, and 613, tiered, 3 bag hole pattern, right hand/left
hand
Platen, for Models 151, 606, and 616 Carousel (round platen)
Platen for Model Models 152, 602, and 612, tiered, 2 bag hole pattern, right hand
Platen for Models 152, 602, and 612, tiered, 2 bag hole pattern, left hand
Platen, flat, 1 bag hole pattern, right hand/left hand, Model N54
Platen tower See 26–4 on page 71.
Platen assembly Models 151, 606, and 616 Carousel side shelf
Platen, flat, Models 152, 602, and 612
Fence, long retaining, Models 152, 602, and 612 (for use with Models 152, 602,
and 612 flat platen)
Fence, short retaining, Models 152, 602, and 612 (for use with Models 152, 602,
and 612 flat platen)
Chapter 2. Load Cells, Platens, Plates, and Retaining Fences
57
Assembly 23: (continued)
58
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 3. Security Conveyor
Assembly 24: Security Conveyor . . . . . . . . . . . . . . . . . . 60
© Copyright IBM Corp. 2006, 2007
59
Updated October 16, 2007
Assembly 24: Security Conveyor
27
23
24
25
1
2
3
26
4
22
5
21
6
20
7
19
8
18
17
16
11
15
14
12
13
28
29
31
31
32
33
30
34
60
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
10
9
Assembly 24: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
24–
–
–
–
–
–1
–1
–2
–2
–2
–3
41J7432
41J7436
41J7440
41J7444
41J8791
41J8896
41J9127
41J8340
41J8848
41D9782
1
1
1
1
1
1
1
1
1
1
–3
41J8867
1
–4
–4
–4
–4
–5
41J9312
41D9816
41J9320
41D9822
28R3196
1
1
1
1
1
–6
–6
–7
–8
–9
28R3298
28R3275
28R3284
28R3285
41J7666
1
1
2
2
2
–10
–11
28R3283
41J9845
2
1
–12
–12
–
–13
–14
–15
–15
–16
41J9845
41J8344
41J8854
41J8850
41D9783
28R3191
28R3277
28R3194
1
1
1
1
1
1
1
1
–17
–17
–18
28R3192
28R3278
41J8338
1
1
1
–18
–19
–19
–20
28R3279
41J7448
41J7450
28R3195
1
1
1
1
–21
–21
–22
28R3190
28R3276
28R3172
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Security conveyor assembly, 19 in., 115V
Security conveyor assembly, 19 in., 230V
Security conveyor assembly, 25 in., 115V
Security conveyor assembly, 25 in., 230V
Skid plate (for standard lane with 19 inch belt)
Skid plate (for wide lane with 25 inch belt)
Plate, front transition, with sensors (for standard lane with 19 inch belt)
Plate, front transition, with sensors (for wide lane with 25 inch belt)
Plate, front transition (for wide lane with 25 inch belt) (includes support bracket)
Card stop bracket (mounted under the transition plate) (for standard lane with 19
inch belt)
Card stop bracket (mounted under the transition plate) (for wide lane with 25 inch
belt)
Motorized pulley, 19" security conveyor 115V-60hz, balanced
Motorized pulley, 19" security conveyor 230V-50hz, balanced
Motorized pulley, 25" security conveyor 115V-60hz, balanced
Motorized pulley, 25" security conveyor 230V-50hz, balanced
Guide, tracking, nose end (order with 28R3195). Adhesive plastic sticker. Reduces
friction between belt and metal sides.
Roller, idler (for standard lane with 19 inch belt)
Roller, idler (for wide lane with 25 inch belt)
Angle adjuster (one on each side)
Drive roller retaining angle (one on each side)
Bracket, drive isolation. Large black coupling. Use to adjust and isolate motor. (one
on each side)
Block, idler roller (one on each side)
Emitter, flat pack sensor assembly, replaces 40M9507, (Flat pack sensor
assemblies for the emitter and detector should be replaced as a set. Order
41J9849 detector.)
Exit sensor emitter (for standard lane with 19 inch belt)
Exit sensor emitter (for wide lane with 25 inch belt)
Sensor cable, transition plate (not shown)
2nd emitter mounting bracket
Exit sensor mounting bracket
Plate, conveyer, left side (for standard lane with 19 inch belt)
Plate, conveyer, left side (for wide lane with 25 inch belt)
Guide, tracking, motor end (order with 28R3197). Adhesive plastic sticker. Reduces
friction between belt and metal sides.
Belt, security conveyor, with roller (for standard lane with 19 inch belt)
Belt, security conveyor, with roller (for wide lane with 25 inch belt)
Crossbar, conveyor frame (for standard lane with 19 inch belt) Aluminum bar.
(Replaces 28R3180)
Crossbar, conveyor frame (for wide lane with 25 inch belt)
Nose bar assembly (for standard lane with 19 inch belt)
Nose bar assembly (for wide lane with 25 inch belt)
Guide, tracking, motor end (order with 28R3196). Adhesive plastic sticker. Reduces
friction between belt and metal sides.
Plate, conveyer, right side (for standard lane with 19 inch belt)
Plate, conveyer, right side (for wide lane with 25 inch belt)
Nose bar angle adjuster
Chapter 3. Security Conveyor
61
Assembly 24: (continued)
Asm–
Index
Part
Number
–23
–24
–25
–25
–26
41J8869
41D9783
41J9849
41J8342
41J9849
1
1
1
1
1
–27
28R3197
1
–
–28
–29
–29
–
–30
–30
–30
–30
–32
–32
41J7676
41J7678
41J9544
41J9546
40M9423
41D9785
41D9786
41D9803
41D9804
41D9784
44M2189
2
1
1
1
1
1
1
1
1
1
–33
–33
–34
–
–
–
–
41D9787
41D9788
44M2232
41J8414
41J8336
42H1161
1
1
1
4
1
1
–
–
41E1748
41E1749
4
2
62
Updated October 16, 2007
Units Description
2nd detector mounting bracket
Exit sensor mounting bracket
Exit sensor detector (for standard lane with 19 inch belt)
Exit sensor detector (for wide lane with 25 inch belt)
Detector, flat pack sensor assembly, replaces 40M9508, (Flat pack sensor
assemblies for the emitter and detector should be replaced as a set. Order
41J9845 emitter.)
Guide, tracking, motor end (order with 28R3194). Adhesive plastic sticker. Reduces
friction between belt and metal sides.
M6 x 19 Black screw for security shield (not shown)
Security shield
Capacitor box, 230V
Capacitor box, 115V
Capacitor box cable (provides power to the conveyor motors) (not shown)
Curtain support, RH (for standard lane with 19 inch belt)
Curtain support, RH (for wide lane with 25 inch belt)
Curtain support, LH (for standard lane with 19 inch belt)
Curtain support, LH (for wide lane with 25 inch belt)
Cap, tower (one on each side)
Curtain detector/emitter sensor assembly (matched set) (located in the curtain
tower)
Tower, rear curtain support (for standard lane with 19 inch belt)
Tower, rear curtain support (for wide lane with 25 inch belt)
Curtain guard, customer side (for wide lane with 25 inch belt)
Cable, curtain sensor fanout dongle (not shown)
Wire cord clips (bag of 10)
Cable tie (not shown)
NOTE: Hardware items such as screws, bolts, nuts, and washers removed during
the disassembly of parts should be retained for use during re-assembly of those
parts. Screws, bolts, nuts, and washers can not be ordered separately, they are
available as part of a field kit. See Chapter 12, “Field Kits and Tools,” on page 101
for a listing of screws, bolts, nuts, and washers contained in each field kit.
Transition plate extension cable
Sensor extension cable
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 4. Transport Conveyor
Assembly 25: Transport Conveyor . . . . . . . . . . . . . . . . . . 64
© Copyright IBM Corp. 2006, 2007
63
Updated October 16, 2007
Assembly 25: Transport Conveyor
21
14
20
19
18
17
1
16 15
13
14
2
4
3
12
4
11
5
6
10
7
8
9
64
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 25: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
25–
–
–
–
–
–
–
–
–
–1
–2
–2
–3
–4
–4
–4
–4
–5
–5
–6
–6
–7
–8
41J7434
44M1899
44M1900
41J7438
41J7442
44D0405
44D0407
41J7446
28R3196
28R3189
28R3274
41D9769
41J9310
41D9818
41J9318
41D9820
41J8438
28R3279
28R3298
28R3275
28R3197
41J7666
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
–9
–10
–11
–12
–13
–14
–15
–15
–16
–17
–17
–18
–18
28R3285
28R3283
28R3284
28R3172
41J7426
41J6928
41D7146
41J8450
28R3195
41J7448
41J7450
41J8332
44M1913
2
2
2
1
1
1
1
1
1
1
1
1
1
–18
–18
–19
–20
–21
–21
–
–
–
–
–
–
–
44M1914
41J8334
28R3194
41J7425
41D7150
41J8452
41J7126
41J7127
41J8854
41J8855
41J8856
42H1161
41J8336
1
1
1
1
1
1
1
1
1
1
1
1
1
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Transport conveyor assembly, 19 in., 115V
Transport conveyor assembly with Sensormatic, 19 in., 115V, right hand
Transport conveyor assembly with Sensormatic, 19 in., 115V, left hand
Transport conveyor assembly, 19 in., 230V
Transport conveyor assembly, 25 in., 115V
Transport conveyor assembly with Sensormatic, 25 in., 115V, right hand
Transport conveyor assembly with Sensormatic, 25 in., 115V, left hand
Transport conveyor assembly, 25 in., 230V
Guide, tracking, motor end (order with 28R3195). Adhesive plastic sticker.
Belt, transport conveyor (for standard lane with 19 inch belt)
Belt, transport conveyor (for wide lane with 25 inch belt)
LED light visor mount (not shown, located on motor cable)
Motorized pulley, 19" conveyor 115-60hz, unbalanced (transport only)
Motorized pulley, 19" transport conveyor 230V
Motorized pulley, 25" conveyor 115-60hz, unbalanced (transport only)
Motorized pulley, 25" transport conveyor 230V
Crossbar, conveyor frame (for standard lane with 19 inch belt)
Crossbar, conveyor frame (for wide lane with 25 inch belt)
Roller (for standard lane with 19 inch belt)
Roller (for wide lane with 25 inch belt)
Guide, tracking, motor end (order with 28R3194). Adhesive plastic sticker.
Bracket, drive isolation. Large black coupling. Use to adjust and isolate motor. (one
on each side)
Drive roller retaining angle (one on each side)
Block, idler roller (one on each side)
Bracket, tensioner (one on each side)
Nosebar adjusting angle
Plate, side, transport conveyor, left side
Emitter/detector bracket, bagging area full sensor
Emitter, bagging area full sensor (for standard lane with 19 inch belt)
Emitter, bagging area full sensor (for wide lane with 25 inch belt)
Guide, tracking, motor end (order with 28R3196). Adhesive plastic sticker.
Assembly, nosebar, (for standard lane with 19 inch belt) (Replaces 28R7098)
Assembly, nosebar, (for wide lane with 25 inch belt) (Replaces 28R7084)
Skid plate, (for standard lane with 19 inch belt), no Sensormatic
Skid plate with Sensormatic opening, (for standard lane with 19 inch belt), right
hand
Skid plate with Sensormatic opening, (for standard lane with 19 inch belt), left hand
Skid plate, (for wide lane with 25 inch belt), no Sensormatic
Guide, tracking, motor end (order with 28R3197). Adhesive plastic sticker.
Plate, side, transport conveyor, right side plate
Detector, bagging area full sensor (for standard lane with 19 inch belt)
Detector, bagging area full sensor (for wide lane with 25 inch belt)
25 inch order separator (not shown). See 42–1 on page 121.
19 inch order separator (not shown). See 42–1 on page 121.
Sensor cable, transition plate (not shown)
Transition plate emitter (not shown)
Transition plate detector (not shown)
Cable tie (not shown)
Wire cord clips (bag of 10)
Chapter 4. Transport Conveyor
65
Assembly 25: (continued)
Asm–
Index
–
66
Part
Number
Updated October 16, 2007
Units Description
NOTE: Hardware items such as screws, bolts, nuts, and washers removed during
the disassembly of parts should be retained for use during re-assembly of those
parts. Screws, bolts, nuts, and washers can not be ordered separately, they are
available as part of a field kit. See Chapter 12, “Field Kits and Tools,” on page 101
for a listing of screws, bolts, nuts, and washers contained in each field kit.
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Chapter 5. Bagging and Carousel Bagging
© Copyright IBM Corp. 2006, 2007
67
Updated October 16, 2007
Assembly 26: Carousel parts . . . . . . . . . . . . . . . . . . . . 70
A
B
D
C
F
Figure 2. Self Checkout bagging options
68
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
E
Updated October 16, 2007
Contact your IBM parts center for bagging parts. Be sure to have the correct model
name and store name when ordering parts. See “How to Use This Parts Manual” on
page v for general parts manual information, including ordering parts. See
“Identifying a Right Hand or Left Hand Model” on page v for how to identify left
hand and right hand models.
The bagging options are:
Table 1.
Key
Description
|
A
Model 131, bagging rack attached to the core module
|
B
Models 151, 606, and 616, 6 bagging stations on a carousel
|
C
Models 152, 602, and 612, 2 bagging stations
|
D
Models 153, 603, and 613, 3 bagging stations
E
Model N54 Express-Plus, 1 bagging station
F
Models 171, 800, and 810 Full Lane, a transport conveyor that delivers items
to a bagging area
|
|
Chapter 5. Bagging and Carousel Bagging
69
Updated October 16, 2007
Assembly 26: Carousel parts
4
3
2
5
1
6
7
10
9
8
70
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 26: (continued)
Updated October 16, 2007
Asm–
Index
|
|
|
|
|
|
|
|
|
26–1
–2
–3
–4
–
–5
–6
–7
–8
–9
–10
–
–
–
–
–
Part
Number
41D9744
41D8195
41D7621
41D8194
44M1975
44M1976
44M1977
41D8185
41D8187
41D8190
41D8192
41D8193
Units Description
1 Load cell. See 22–1 on page 55.
Platen, carousel side shelf. See assembly 23– on page 57.
1 Carousel bag pack clamping plate
1 Lid tower, Models 151, 606, and 616 Carousel, round small
1 Carousel assembly contains:
v Platen, carousel round. See 23– on page 57.
v Load cell, carousel. See 22–1 on page 55.
1 v Wheel assembly Models 151, 606, and 616 carousel, plastic
1 Kickplate, front/rear, for Models 151, 606, and 616 carousel
1 Kickplate, side, for Models 151, 606, and 616 carousel
1 Kickplate, shelf, for Models 151, 606, and 616 carousel
1 Lower bushing kit, Models 151, 606, and 616 carousel (not shown)
1 Carousel parts kit, contains - 4 M8x10 hex socket screws, 4 rubber buffers
30x25xM8, 1 grounding spring, 4 shims frolic 1026D, 4 Phil pan head screws NC
6x1", 8 M6x35 hex socket screws, 1 bearing, 8 socket head shoulder screws (M8),
1 upper bushing, 1 nylon locking nut, 1 plastic plug transparent
1 Electrical interface box for Models 151, 606, and 616 carousel (not shown)
1 Cable, Models 151, 606, and 616 carousel data communication (not shown)
1 Power supply Models 151, 606, and 616 carousel, 120/9V external (not shown)
Chapter 5. Bagging and Carousel Bagging
71
Assembly 26: (continued)
72
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 6. Wire Bag Rack
Assembly 27: Wire Bag Rack
© Copyright IBM Corp. 2006, 2007
. . . . . . . . . . . . . . . . . . . 74
73
Updated October 16, 2007
Assembly 27: Wire Bag Rack
1
74
2
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
3
Assembly 27: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
27–1
–2
–3
–
28R3173
28R5540
41K7093
41D8560
Units Description
(28R3167) Tall rack
(28R5697) Short rack
(41K7092) European rack
(41D8559) Rack clamp (not shown)
Chapter 6. Wire Bag Rack
75
Assembly 27: (continued)
76
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 7. BOSS
Assembly 28: BOSS FRUs
© Copyright IBM Corp. 2006, 2007
. . . . . . . . . . . . . . . . . . . . 78
77
Updated October 16, 2007
Assembly 28: BOSS FRUs
78
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 28: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
28–
–
–
23K8035
41A3391
Units Description
1 Cover, I/O blank
1 Riser card, 2 PCI slots
Lane PC. See “Assembly 21: Lane PC, Mouse, and Keyboard” on page 50.
Monitor/display. See 1–4 on page 3.
Magnetic stripe reader. See 1–5 on page 3.
Power strip. See 1–37 on page 4.
Power supply. See 1–34 on page 4.
Printer. See “Assembly 12: Printers TIx and TGx” on page 28.
Chapter 7. BOSS
79
Assembly 28: (continued)
80
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 8. Integrated Paystation
Assembly 29: Paystation . . . . . . . . . . . . . . . . . . . . . 82
© Copyright IBM Corp. 2006, 2007
81
Updated October 16, 2007
Assembly 29: Paystation
1
2
3
4
2
5
82
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 29: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
29–
–
–1
–2
–3
–4
–5
41D8116
41D8118
41D7391
41D7320
44D0861
44D0862
Units Description
1
1
1
1
1
1
1
Stabilizer, paystation front/rear (not shown)
Stabilizer, paystation side (not shown)
Paystation shelf
Integrated Paystation interface plate/cable cover
Integrated Paystation front/rear kickplate
Integrated Paystation left/right side kickplate
Keylock, cabinet lock with key. See Chapter 11, “Locks and Keys,” on page 95.
Chapter 8. Integrated Paystation
83
Assembly 29: (continued)
84
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 9. EPO (Red) Button
Assembly 30: EPO (Red) Button . . . . . . . . . . . . . . . . . . 86
© Copyright IBM Corp. 2006, 2007
85
Updated October 16, 2007
Assembly 30: EPO (Red) Button
1
2
86
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 30: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
30–1
41K7082
–2
41K7080
Units Description
1 EPO button (red) button cable assembly (EPO button mounted on top of upper core
module door for certain customers)
1 Reset (green) and EPO (red) buttons Y cable (used with 41K7082 instead of
40M9470 1–2 on page 3)
Chapter 9. EPO (Red) Button
87
Assembly 30: (continued)
88
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 10. Cables
Assembly 31: Cables. . . . . . . . . . . . . . . . . . . . . . . 90
Assembly 32: Power Cords . . . . . . . . . . . . . . . . . . . . 92
© Copyright IBM Corp. 2006, 2007
89
Updated October 16, 2007
Assembly 31: Cables
5
1
2
3
29 28 27 26 25 24 23 21 20
19 18
4 6 7 8
17
9
16
22
90
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
10
15
11
14
12
13
Assembly 31: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
31–
–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–11
–12
NA
41D7073
40M9472
41E1831
41E1830
40M9400
NA
40M9470
41K6368
NA
28R3565
28R3559
1
1
1
1
1
1
1
1
1
1
1
1
–13
–14
–15
–16
–17
–18
–19
–20
–21
–22
–22
–23
–24
–25
–
–
–26
–27
–27
–28
–29
–
–
–
–
28R3559
28R3589
40M9423
41D7073
41D7073
41D7073
41D7073
44D1165
41E1619
41D7073
41D9361
41J7731
41K6352
41K6365
44M1643
41J9835
28R3684
41K6354
41K6359
41K6370
41K6369
41D7072
41D7075
41D7073
41J7452
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
The illustration shown here is for reference only. There is a tag on each cable that
contains the part number for that cable. When ordering replacement cables
reference the part number on the tag of the failing or broken cable.
See “How to Use This Parts Manual” on page v for general parts manual
information, including ordering parts. See “Identifying a Right Hand or Left Hand
Model” on page v for how to identify left hand and right hand models.
Scanner/scale (optional) (SA) (Supplied by the scanner/scale manufacturer)
RS-232 Security scale (SD) Cable, 6 foot, DB9, male/female
Proximity sensor to security controller (PRX)
Coupon detector to security controller (CPN)
Coupon detector to coupon indicator LED
Bill dispenser RS232 cable (BLD)
Transaction awareness light (TAL) (comes as part of the light assembly)
Reset button (RX)
Security controller DC power (DCI) with power supply
Lane light (optional) (LLT) (comes as part of the light assembly)
Power input from uninterruptible power supply cable (UPI)
Uninterruptible power supply power output to device power strip (UPO) IEC60320
to C14 Adapter
Main power output (MAO)
Main power input from power filter box (MAI)
Capacitor box (CVB)
To curtain emitter (DE1) Cable, 6 foot, DB9, male/female
To curtain detector (DD1) Cable, 6 foot, DB9, male/female
Security scale front load cell (DW1) Cable, 6 foot, DB9, male/female
Security scale rear load cell (DW2) Cable, 6 foot, DB9, male/female)
Sensormatic control cable
Splitter cable to uninterruptible power supply and sensors (DSU)
Cable to uninterruptible power supply from splitter cable
240V Cable to uninterruptible power supply from splitter cable
USB to lane PC (USB1)
Coin dispenser data cable (DB9 on one end, RJ45 on other)
Cash cup (DPK)
Cash cup detector cable (not shown)
Cash cup emitter cable (not shown)
Bill acceptor (BLA)
Coin acceptor cable, US/Canada
Coin acceptor cable, EMEA/Australia
Audio out to speaker (OUT)
Audio to lane PC (IN)
10' Ethernet CAT5 cable
5' Ethernet CAT5 cable
ELO touchscreen Cable, 6 foot, DB9, male/female
Cable harness loop style
Chapter 10. Cables
91
Updated October 16, 2007
Assembly 32: Power Cords
1
E
N
L
Coupler Face
2
E
N
L
Coupler Face
3
E
N
L
Coupler Face
4
Coupler Face
92
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Plug Face
Assembly 32: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
32–1
–2
–3
–4
39M5107
39M5073
39M5177
41J8393
Units Description
1
1
1
1
4.3m,
4.3m,
4.3m,
1.8m,
Right angle power cord, NEMA L5–15P
Nonlock right angle power cord, NEMA 5–15P
Right angle power cord, IEC 309 16A/250V 2P+G
Inline coupler power cord, IEC 320 10A/125V
Chapter 10. Cables
93
Assembly 32: (continued)
94
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 11. Locks and Keys
Assembly 33: Currency Lock with Key . . . . . . . . . . . . . . . . 96
Assembly 34: Cabinet Lock with Key . . . . . . . . . . . . . . . . . 98
© Copyright IBM Corp. 2006, 2007
95
Updated October 16, 2007
Assembly 33: Currency Lock with Key
1
2
3
4
5
96
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 33: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
33–1
–2
–3
–4
–4
–4
–4
–4
–4
–4
–4
–4
–4
–5
–5
–5
–5
–5
–5
–5
–5
–5
–5
41K6088
41K6087
44D0244
41K6120
41K6121
41K6122
41K6123
41K6124
41K6125
41K6126
41K6127
41K6128
41K6129
41K6130
41K6131
41K6132
41K6133
41K6134
41K6135
41K6136
41K6137
41K6138
41K6139
Units Description
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Coin lock cam
Safe lock cam
Safe door pull
Currency lock with key, combo #1, Emka key 306
Currency lock with key, combo #2, Emka key 314
Currency lock with key, combo #3, Emka key 321
Currency lock with key, combo #4, Emka key 343
Currency lock with key, combo #5, Emka key 351
Currency lock with key, combo #6, Emka key 382
Currency lock with key, combo #7, Emka key 420
Currency lock with key, combo #8, Emka key 437
Currency lock with key, combo #9, Emka key 463
Currency lock with key, combo #10, Emka key 520
Currency key, combo #1, Emka key 306
Currency key, combo #2, Emka key 314
Currency key, combo #3, Emka key 321
Currency key, combo #4, Emka key 343
Currency key, combo #5, Emka key 351
Currency key, combo #6, Emka key 382
Currency key, combo #7, Emka key 420
Currency key, combo #8, Emka key 437
Currency key, combo #9, Emka key 463
Currency key, combo #10, Emka key 520
Chapter 11. Locks and Keys
97
Updated October 16, 2007
Assembly 34: Cabinet Lock with Key
4
1
2
5
3
6
98
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 34: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
34–1
–1
–1
–1
–1
–1
–1
–1
–1
–1
–
–
–
–
–
–
–
–
–
–
–2
–3
–4
–4
–5
–6
–
–
–
42K0080
42K0081
42K0082
42K0083
42K0084
42K0085
42K0086
42K0087
42K0088
42K0089
42K0090
42K0091
42K0092
42K0093
42K0094
42K0095
42K0096
42K0097
42K0098
42K0099
41K6585
41K6094
41K6105
41K6597
41K6087
41K6104
41K6098
41K6099
41K6100
Units Description
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Cabinet lock with key, combo #1, Emka key 305
Cabinet lock with key, combo #2, Emka key 436
Cabinet lock with key, combo #3, Emka key 448
Cabinet lock with key, combo #4, Emka key 449
Cabinet lock with key, combo #5, Emka key 450
Cabinet lock with key, combo #6, Emka key 471
Cabinet lock with key, combo #7, Emka key 478
Cabinet lock with key, combo #8, Emka key 487
Cabinet lock with key, combo #9, Emka key 502
Cabinet lock with key, combo #10, Emka key 608
Cabinet key, combo #1, Emka key 305
Cabinet key, combo #2, Emka key 436
Cabinet key, combo #3, Emka key 448
Cabinet key, combo #4, Emka key 449
Cabinet key, combo #5, Emka key 450
Cabinet key, combo #6, Emka key 471
Cabinet key, combo #7, Emka key 478
Cabinet key, combo #8, Emka key 487
Cabinet key, combo #9, Emka key 502
Cabinet key, combo #10, Emka key 608
Lock indicator
Lock cam, lower door
Latch bar, upper RH, lower door
Latch bar, upper LH, lower door
Lock cam, upper door
Latch bar, lower, lower door
Vertical crossbar lock bar, upper door (for doors with a single lock)
Horizontal crossbar lock bar, upper door (for doors with a single lock)
Latching bar, upper door, right hand (for doors with a single lock)
Chapter 11. Locks and Keys
99
Assembly 34: (continued)
100
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Chapter 12. Field Kits and Tools
Assembly 35: Field Kits and Tools . . . . . . . . . . . . . . . . . 102
Field kits contain an assortment of screws, washers, nuts, and bolts.
Hardware items such as screws, bolts, nuts, and washers, removed during the
disassembly of parts should be retained for use during re-assembly of those parts.
Screws, bolts, nuts, and washers can not be ordered separately, they are available
as part of a field kit.
© Copyright IBM Corp. 2006, 2007
101
Field Kits and Tools
Assembly 35: Field Kits and Tools
102
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Assembly 35: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
35–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
41D7009
Units Description
1 4845 Fastener kit This kit contains:
2 – #4-40 Hex nuts
2 – #6-32 Lock nuts
2 – 1/4"-20 Hex nut
2 – #6-32 Hex nut
2 – #8-32 Nylon lock nuts
2 – #10-32 Nylon nuts
2 – 1/4"-20 Hex nuts
8 – 1/4"-20 Nylon nuts
4 – 5/16"-18 Hex nuts
2 – 1/4"-20 x 1/2" Phillips head pan screws
2 – #10-32 x 3" Phillips head pan screws
2 – M3 x 8mm Slotted flat head screws
2 – #6–32 x 3/8" Phillips pan screws
2 – #10-32 x 5/8" Phillips pan head screws
2 – #6-32 x 1/4" Phillips pan head screws
2 – #10-32 x 5/8" Phillips pan head screws
2 – #6-32 x 1/4" Phillips pan head screws
2 – #10-32 x 1/2" Phillips pan head screws
2 – #10-32 x 1/4" Cup point set screws
2 – #10-32 x 1/2" Phillips sheet metal screws
2 – #5/16"-18 x 4" bolts
2 – #10-32 x 1/2" Cup point set screws
2 – #6-32 x 3/8" Phillips flat head machine screws
2 – #8-32 x 1/2" Black Phillips washer head screws
2 – #6-32 x 1/4" Flat head screws
2 – #8–32 x 5/8" Phillips sheet metal flange head
2 – #8-32 x 1/2" Phillips pan head sheet metal screws
2 – #8-32 x 3/4" Phillips sheet metal screws
2 – #10-32 x 5/8" Phillips pan head screws
4 – #10-32 x 1/2" Button head machine screws
2 – #10-32 x 1/2" Phillips Pan head screws
2 – #10-32 x 3/4" Phillips pan head machine screws
2 – 1/4"-28 x 1-1/2" Hex cap screws
2 – 1/4"-20 x 3/4" Hex cap screws
2 – 1/4"-20 x 5/8" Hex cap screws
2 – 1/4"-20 x 1" Phillips flat head screws
4 – 1/4"-20 x 1" Hex cap screws
2 – 1/4"-20 x 2-1/4" Hex cap screws
2 – 1/4"-20 X 1-1/4" Hex cap screws
2 – Fully threaded rod
2 – 3/8"-16 x 1" Hex cap screw
2 – 3/8" Lock nuts
2 – #4-40 x 5/8" Phillips pan head screws
4 – Hinged black screw cover
4 – 1/4"-20 x 3/4" Phillips pan head screws
4 – #10-32 x 1/4" Phillips pan head machine screws
2 – #10-24 x 1/4" Pan head machine screws
2 – M4 x 8mm screws
2 – M5 x 6mm Phillips pan head machine screws
2 – #6-32 x 1/2" Self-tapping screws
2 – #6 External star washers
2 – #6 Split lock washers
Chapter 12. Field Kits and Tools
103
Assembly 35: (continued)
Asm–
Index
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
104
Part
Number
44D0412
44D0533
44D0534
44M2154
44M2155
44D1606
41D9631
44D1776
41D9350
41D9351
41D9352
41D9353
41D9354
41D9355
41D7101
41K6284
Updated October 16, 2007
Units Description
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2 – #4 Split lock washers
2 – 1/4" x 1/2" Hex cap screws
4 – 5/16" Flat washers
2 – #10 Flat washers
4 – 1/4" Flat washers
4 – 1/4" Split lock washers
2 – 1/4" External star washers
2 – 3/8" Split lock washers
4 – 1/4” Flat washers
2 – 1/4"-20 x 2-1/2" Hex screws
4 – #10-24 Nylon lock nuts
Washer/clip kit
UNC screw kit
Metric screw kit
Cash module lower door field adjustment kit, right hand
Cash module lower door field adjustment kit, left hand
Sensormatic field installation kit
Velcro tape
Version 3.00 Ghost software kit
US coin acceptor programming module
Canadian coin acceptor programming module
UK coin acceptor programming module
Euro coin acceptor programming module
Australian coin acceptor programming module
US penniless coin acceptor programming module
Bill dispenser fastener kit (fasteners, screws, and retainers)
Bill dispenser screwdriver kit
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Appendix A. Cabinet Parts and Sensors
|
Assembly 36: Core Module Cabinet FRUs . . . . . . . . . .
Assembly 37: Security Conveyor and Transport Conveyor Cabinet .
Assembly 38: Models 152, 602, and 612 Bagging Cabinet . . . .
Assembly 39: Models 153, 603, and 613 Bagging Cabinet . . . .
Assembly 40: Model N54 Bagging Cabinet . . . . . . . . . .
Assembly 41: Models 171, 800, and 810 Bagging Cabinet . . . .
Assembly 42: Models 171, 800, and 810 Bumpers, Order Separators,
Goods Shelf . . . . . . . . . . . . . . . . . . . .
Assembly 43: Sensors, Emitters, and Detectors . . . . . . . .
. .
. .
. .
. .
. .
. .
Soft
. .
. .
.
.
.
.
.
.
.
.
.
.
.
.
106
110
112
114
116
118
. . 120
. . 122
This appendix contains the locations and descriptions of the cabinet parts. Cabinet
parts can be ordered by description from the IBM Self Checkout Solution service
center. You must have the IBM Self Checkout Solution model number, cabinet part
description, customer name, color, and whether the machine is a left hand or right
hand model.
© Copyright IBM Corp. 2006, 2007
105
Updated October 16, 2007
Assembly 36: Core Module Cabinet FRUs
2
1
40
2a
32
29
30a
30
9
27
11
31
26
3
12
5
46
12
45
44
25
24
9
13
10
47
19
48
42
17
20
19
15
43
25
41
22
17
15
23
106
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 36: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
36–
–1
–2
–3
–5
–9
–10
–
–11
–12
–13
–15
–17
–19
–20
–22
–22
–23
–24
–24
–25
–26
–26
–27
–29
–30
–30
–30A
–31
–32
–
–40
–41
–
–42
–42
–43
–44
–45
–45
–46
–46
–47
–47
–48
–
–
–
–
42K0056
42K0068
41K6103
1
1
1
41K6165
41K6164
41K6600
41K6148
41K6150
41K6149
41D7344
12R9478
41K6167
41K6168
1
1
1
1
1
1
1
1
1
1
41K6154
41K6155
41K6156
41K6162
41K6163
1
1
1
1
1
42K0057
41K6151
41K6152
41K6153
42K0051
41K6157
41K6159
41K6102
41K6106
41K6108
41K6140
41K6141
41K6083
41K6142
41K6144
41K6146
41K6143
41K6145
44M1961
44M1959
41J6659
41K6595
41D8382
41D8383
41K6572
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Upper door assembly (No part number assigned, custom color part)
Cabinet Weldment (No part number assigned, custom color part)
Rear bumper
Gas spring stiffener plate
Cable retainer, hook and loop
Exterior access panel (No part number assigned, custom color part)
Access panel thumbscrew/retainer (not shown)
Drip pan tubing
Cable, basket shaft
Cable basket bracket
Front/rear kick plate
Left/right kick plate
Leveler (replaces 39Y0601)
Caster, swivel
PC access door assembly, right hand
PC access door assembly, left hand
Lower door assembly, cash module (No part number assigned, custom color part)
Accessory shelf, right hand
Accessory shelf, left hand
PC/Uninterruptible power supply shelf bracket
Drip pan, right hand
Drip pan, left hand
Upper countertop assembly (see “Assembly 18: Countertop” on page 44 for a
complete listing of available countertops)
Scanner hood
Upper door cover stop, right hand
Upper door stop cover, left hand
Upper door cover stop nut
Gas spring
Bumper, front
Bumper gasket (not shown)
Upper door hinge (includes fasteners)
Lower door, coupon box assembly
Lower door keyboard retaining bracket (not shown)
PC/uninterruptible power supply shelf, right hand
PC/uninterruptible power supply shelf, left hand
Drawer pull
Velcro strap for uninterruptible power supply
Cable basket, short, right hand
Cable basket, short, left hand
Cable basket, long, right hand
Cable basket, long, left hand
Lower door welded hinge pin, right hand
Lower door welded hinge pin, left hand
Lower door hinge spacer plate (not shown)
Door stop, lower (not shown)
Adjuster, lower door, RH (not shown)
Adjuster, lower door, LH (not shown)
Upper door cable cover (not shown)
Appendix A. Cabinet Parts and Sensors
107
Assembly 36: (continued)
Asm–
Index
–
–
–
108
Part
Number
42K0050
41K6147
Updated October 16, 2007
Units Description
1 Spacer for scanner leveler (not shown)
1 Velcro strap for cable basket (not shown)
1 Filler plate, lane light mount opening (used if lane light mount is not used, not
shown) (no part number given, custom color part)
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Appendix A. Cabinet Parts and Sensors
109
Updated October 16, 2007
Assembly 37: Security Conveyor and Transport Conveyor Cabinet
4
2
3
5
6
1
9
10
29
28
11
27
26
12
13
25
14
24
23
17
22
15
16
21
18
20
19
110
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 37: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
37–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–11
–12
–13
–14
–15
–16
–17
–18
–19
–20
–21
–22
–23
–24
–25
–26
–27
–28
–29
41K6382
41K6382
Units Description
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Tower (a single welded assembly, the front curtain support). See 24–30 on page
62.
Tower cap. See 24–32 on page 62.
Curtain detector assembly. See 24–32 on page 62 for detector/emitter FRU
number.
Curtain emitter assembly. See 24–32 on page 62 for detector/emitter FRU number.
Tower cap. See 24–32 on page 62.
Tower, rear curtain support. See 24–33 on page 62.
Channel support
Support bracket
Access door assembly
Wide rail
Upper cabinet console
Front bulkhead
Lower panel
Rear bulkhead
Leveler lock nut
Leveler
Lower cabinet
Cover plate
Transport section door (no FRU number given, custom color part)
1 Hex key cam lock
Security module lower access door (no FRU number given, custom color part)
Hex key cam lock
Trash tray
Cover plate
Lower door panel
Transport conveyor access panel (no FRU number given, custom color part)
Security conveyor access panel (no FRU number given, custom color part)
Bulkhead assembly
Narrow rail (shopper side)
Appendix A. Cabinet Parts and Sensors
111
Updated October 16, 2007
Assembly 38: Models 152, 602, and 612 Bagging Cabinet
1
7
6
2
5
3
4
112
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 38: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
38–
|
|
|
|
|
|
–1
–2
–3
–4
–5
–6
–7
–
–
–
–
44D1363
44D1151
44D0859
44D1365
44D1366
41K6382
1
1
2
2
2
1
1
1
1
1
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Side bumper assembly
Side kickplate
Side access cover (no FRU number given, custom color part)
Corner bumper connector bracket (one on each side)
Front/rear kickplate
Front/back cover (no FRU number given, custom color part)
Front bumper assembly
Rear bumper assembly (not shown)
Hex key cam lock
Lane light mounting clamp (not shown, used when lane light assembly is mounted
to the Models 152, 602, and 612 bagging module). See 20– on page 49 for FRU
number.
Lane light mounting strap (not shown, used when lane light assembly is mounted to
the Models 152, 602, and 612 bagging module). See 20– on page 49 for FRU
number.
Appendix A. Cabinet Parts and Sensors
113
Updated October 16, 2007
|
Assembly 39: Models 153, 603, and 613 Bagging Cabinet
|
1
7
2
6
5
4
3
|
114
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 39: (continued)
Updated October 16, 2007
||
|
Asm–
Index
|
|
|
|
|
|
|
|
|
|
|
|
39–
–1
–2
–3
–4
–5
–6
–7
Part
Number
44D1151
44D1364
44D0860
44D1363
Units Description
2
2
2
1
1
2
1
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Corner bumper connector bracket (one on each side)
Front/rear bumper assembly
Front/rear kickplate
Front access cover (no FRU number given, custom color part)
Side kickplate
Side/back cover (no FRU number given, custom color part)
Side bumper assembly
Appendix A. Cabinet Parts and Sensors
115
Updated October 16, 2007
Assembly 40: Model N54 Bagging Cabinet
116
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 40: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
40–
–
–
–
–
41J9751
41J9752
41J9750
Units Description
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Front/rear bumper assembly
1 Front/rear kickplate
1 Side kickplate
1 Side bumper assembly
Appendix A. Cabinet Parts and Sensors
117
Updated October 16, 2007
Assembly 41: Models 171, 800, and 810 Bagging Cabinet
118
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 41: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
41–
–1
–
–
–
44D0264
44D0266
44D0265
41K6387
1
1
1
1
–
44D0274
1
–2
–
–
–3
–
–4
–5
–6
–7
–8
–9
–10
–
–11
–12
–13
–14
–
–
–
–15
–16
–17
–18
–19
–20
–21
41K6388
44M1749
44M2123
44M1995
44M1992
41K6391
1
1
1
1
1
1
41K6386
41K6385
41D8119
41K6384
1
1
1
1
44D0854
44D0855
44D0856
44D0857
1
1
1
1
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Rear (bagging) transition plate, for right hand, standard lane with 19 inch belt
Rear (bagging) transition plate, for right hand, wide lane with 25 inch belt
Rear (bagging) transition plate, for left hand, standard lane with 19 inch belt
Roller assembly for right hand, standard lane with 19 inch belt (includes rollers,
frame, bracket, rear transition plate, cover plate, screw, wing nut)
Roller assembly for left hand, standard lane with 19 inch belt (includes rollers,
frame, bracket, rear transition plate, cover plate, screw, wing nut)
Bagger roller for standard lane with 19 inch belt
Bagger roller for wide lane with 25 inch belt
M5 nylon wing nut (not shown)
Roller frame bracket
Roller frame cover plate (not shown, located under the rollers)
Hinge bracket
Side rail assembly
Desk pan
Desk pan holder
Cabinet upper console
Bagging shelf support
Bagging shelf
Bagging shelf (for 90 degree angled bag rack, right hand or left hand)
End kickplate for 19, 28, 48, and 66 inch bagging cabinets
Nut leveler adjusting lock nut
Leveler
Side kickplate for 19 inch bagging cabinet
Side kickplate for 28 inch bagging cabinet
Side kickplate for 48 inch bagging cabinet
Side kickplate for 66 inch bagging cabinet
Frame, Weldment
Hex key cam lock
Trash tray
Cabinet door
Panel, lower door
Bulkhead assembly
Side rail
Appendix A. Cabinet Parts and Sensors
119
Updated October 16, 2007
Assembly 42: Models 171, 800, and 810 Bumpers, Order Separators,
Soft Goods Shelf
1
2
6
4
5
3
4
8
7
120
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Assembly 42: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
Units Description
42–
–1
–1
–2
–
–
–
–
–3
–4
–5
–6
–7
–8
–
–
41J7126
41J7127
41K6379
41D8764
41D8766
41D8768
41D8770
41D8772
41D8772
41D8774
41D8776
41D8778
41D8780
44D0852
44D0853
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
25 inch order separator
19 inch order separator
Bagger soft good shelf
Bumper, stock gray, 140mm (not shown, used on core module)
Bumper, stock gray, 150mm (not shown, used on bagging module)
Bumper, stock gray, 280mm (not shown, used on core module)
Bumper, stock gray, 470mm (not shown, used on core module)
Bumper, stock gray, 540mm
Bumper, stock gray, 540mm
Bumper, stock gray, 700mm
Bumper, stock gray, 1030mm
Bumper, stock gray, 1450mm
Bumper, stock gray, 1840mm
Side kickplate, 19 in. security module
Side kickplate, 25 in. security module
Appendix A. Cabinet Parts and Sensors
121
Updated October 16, 2007
Assembly 43: Sensors, Emitters, and Detectors
9
To Core
Module
Transmission Plate
Emitter
10
7
11
Curtain Emitter
8
7
BAF Emitter
2
1
FP Emitter
2
RC Emitter
1
3
Transition Plate
Emitter
Shopper Flow
Transport Conveyor
Security Conveyor
4
Transition Plate
Detector
To Core
Module
122
5
FP Detector
5
RC Detctor
4
6
BAF Detector
8
7
10
Curtain Detector
9
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
7
Transition Plate
Detector
Assembly 43: (continued)
Updated October 16, 2007
Asm–
Index
Part
Number
43–
–1
–2
–3
–4
–5
–6
–7
–8
–9
–10
–11
44M1624
Units Description
Be sure to specify whether you are ordering replacement parts for a left hand or a
right hand model. See “How to Use This Parts Manual” on page v for general parts
manual information, including ordering parts. See “Identifying a Right Hand or Left
Hand Model” on page v for how to identify left hand and right hand models.
Transition plate emitter. See 25– on page 65 for FRU number.
Flat pack sensor emitter and also exit sensor emitter. See 24–11 on page 61 and
24–12 on page 61 for FRU number.
Bagging area full emitter sensor assembly. See 25–15 on page 65 for FRU number.
Transition plate detector. See 25– on page 65 for FRU number.
Flat pack sensor emitter and also exit sensor emitter. See 24–26 on page 62 and
24–12 on page 61 for FRU number.
Bagging area full detector sensor. See 25–21 on page 65 for FRU number.
Transition plate extension cable. See 24– on page 62 for FRU number.
Sensor extension cable. See 24– on page 62 for FRU number.
DB9 cable curtain emitter/detector extension cable. See 31–16 on page 91 for FRU
number.
Curtain detector/emitter sensor assembly. See 24–32 on page 62 for FRU number.
1 Ferrite core (on transition plate extension cable)
Appendix A. Cabinet Parts and Sensors
123
Assembly 43: (continued)
124
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Updated October 16, 2007
Appendix B. Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in
other countries. Consult your local IBM representative for information on the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may be
used instead. However, it is the user’s responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering the subject matter in
this document. The furnishing of this document does not give you any license to
these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
For license inquiries regarding double-byte character set (DBCS) information,
contact the IBM Intellectual Property Department in your country or send inquiries,
in writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United Kingdom or any other country
where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS
MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. Some states
do not allow disclaimer of express or implied warranties in certain transactions,
therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements and/or
changes in the product(s) and/or program(s) described in this publication at any
time without notice.
IBM may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.
Any references in this information to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for this
IBM product and use of those Web sites is at your own risk.
© Copyright IBM Corp. 2006, 2007
125
Updated October 16, 2007
Information concerning non-IBM products was obtained from the suppliers of those
products, their published announcements or other publicly available sources. IBM
has not tested those products and cannot confirm the accuracy of performance,
compatibility or any other claims related to non-IBM products. Questions on the
capabilities of non-IBM products should be addressed to the suppliers of those
products.
This information is for planning purposes only. The information herein is subject to
change before the products described become available.
126
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Electronic emission notices
Federal Communications Commission (FCC) statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
his own expense.
Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
European Union EMC Directive conformance statement
This product is in conformity with the protection requirements of EU Council
Directive 2004/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility. IBM cannot accept responsibility for any
failure to satisfy the protection requirements resulting from a non-recommended
modification of the product, including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European Standard EN
55022. The limits for Class A equipment were derived for commercial and industrial
environments to provide reasonable protection against interference with licensed
communication equipment.
Attention: This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures.
European Community contact:
IBM Technical Regulations
Pascalstr. 100, Stuttgart, Germany 70569
Telephone: 0049 (0)711 785 1176
Fax: 0049 785 1283
E-mail: [email protected]
Appendix B. Notices
127
Updated October 16, 2007
Industry Canada Class A Emission Compliance statement
This Class A digital apparatus complies with Canadian ICES-003.
Avis de conformité aux normes d’Industrie Canada
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Germany
Zulassungsbescheinigung laut dem Deutschen Gesetz über die
elektromagnetische Verträglichkeit von Geräten (EMVG) vom 30. August 1995
(bzw. der EMC EG Richlinie 89/336).
Dieses Gerät ist berechtigt in Übereinstimmung mit dem Deutschen EMVG das
EG-Konformitätszeichen - CE - zu führen.
Verantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die
IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart
Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2:
Das Gerät erfüllt die Schutzanforderungen nach EN 50082–1 und EN 55022 Klasse A.
EN 55022 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden:
″Warnung: dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im
Wohnbereich Funkstörungen verursachen; in diesem Fall kann vom Betreiber
verlangt werden, angemessene Maβnahmen durchzuführen und dafür
aufzukommen.″
EN 50082–1 Hinweis:
″Wird dieses Gerät in einer industriellen Umgebung betrieben (wie in EN 50082–2
festgelegt), dann kann es dabei eventuell gestört werden. In solch einem Fall ist der
Abstand bzw. die Abschirmung zu der industriellen Störquelle zu vergröβern.″
Anmerkung:
Um die Einhaltung des EMVG sicherzustellen sind die Geräte, wie in den IBM
Handbüchern angegeben, zu installieren und zu betreiben.
Australia and New Zealand
Attention: This is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to take adequate
measures.
Japanese power line harmonics compliance statement
128
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Japanese Voluntary Control Council for Interference (VCCI) statement
Attention: This product is a Class A Information Technology Equipment and
conforms to the standards set by the Voluntary Control Council for Interference by
Technology Equipment (VCCI). In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Cable ferrite requirement
All cable ferrites are required to suppress radiated EMI emissions and must not be
removed.
Electrostatic Discharge (ESD)
Attention: ESD damage can occur when there is a difference in charge between
the part, the product, and the service person. No damage will occur if the service
person and the part being installed are at the same charge level.
ESD Damage Prevention
Anytime a service action involves physical contact with logic cards, modules,
back-panel pins, or other ESD sensitive (ESDS) parts, the service person must be
connected to an ESD common ground point on the product through the ESD wrist
strap and cord.
The ESD ground clip can be attached to any frame ground, ground braid, green
wire ground, or the round ground prong on the AC power plug. Coax or connector
outside shells can also be used.
Handling Removed Cards
Logic cards removed from a product should be placed in ESD protective containers.
No other object should be allowed inside the ESD container with the logic card.
Attach tags or reports that must accompany the card to the outside of the container.
Product Recycling and disposal
This unit must be recycled or discarded according to applicable local and national
regulations. IBM encourages owners of information technology (IT) equipment to
responsibly recycle their equipment when it is no longer needed. IBM offers a
variety of product return programs and services in several countries to assist
equipment owners in recycling their IT products. Information on IBM product
recycling offerings can be found on IBM’s Internet site at http://www.ibm.com/ibm/
environment/products/prp.shtml.
Español:
Esta unidad debe reciclarse o desecharse de acuerdo con lo establecido en la
normativa nacional o local aplicable. IBM recomienda a los propietarios de equipos
de tecnología de la información (TI) que reciclen responsablemente sus equipos
cuando éstos ya no les sean útiles. IBM dispone de una serie de programas y
servicios de devolución de productos en varios países, a fín de ayudar a los
Appendix B. Notices
129
Updated October 16, 2007
propietarios de equipos a reciclar sus productos de TI. Se puede encontrar
información sobre las ofertas de reciclado de productos de IBM en el sitio web de
IBM http://www.ibm.com/ibm/environment/products/prp.shtml.
Notice: This mark applies only to countries within the European Union (EU) and
Norway.
Appliances are labeled in accordance with European Directive 2002/96/EC
concerning waste electrical and electronic equipment (WEEE). The Directive
determines the framework for the return and recycling of used appliances as
applicable throughout the European Union. This label is applied to various products
to indicate that the product is not to be thrown away, but rather reclaimed upon end
of life per this Directive.
In accordance with the European WEEE Directive, electrical and electronic
equipment (EEE) is to be collected separately and to be reused, recycled, or
recovered at end of life. Users of EEE with the WEEE marking per Annex IV of the
WEEE Directive, as shown above, must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available to customers for the
return, recycling, and recovery of WEEE. Customer participation is important to
minimize any potential effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For proper collection and
treatment, contact your local IBM representative.
Disposal of IT products should be in accordance with local ordinances and
regulations.
Battery return program
This product may contain sealed lead acid, nickel cadmium, nickel metal hydride,
lithium, or lithium ion battery. Consult your user manual or service manual for
specific battery information. The battery must be recycled or disposed of properly.
Recycling facilities may not be available in your area. For information on disposal of
batteries outside the United States, go to http://www.ibm.com/ibm/environment/
products/batteryrecycle.shtml or contact your local waste disposal facility.
In the United States, IBM has established a return process for reuse, recycling, or
proper disposal of used IBM sealed lead acid, nickel cadmium, nickel metal hydride,
and other battery packs from IBM equipment. For information on proper disposal of
these batteries, contact IBM at 1-800-426-4333. Please have the IBM part number
listed on the battery available prior to your call.
130
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
For Taiwan:
Please recycle batteries.
For the European Union:
Notice: This mark applies only to countries within the European Union (EU)
Batteries or packaging for batteries are labeled in accordance with European
Directive 2006/66/EC concerning batteries and accumulators and waste batteries
and accumulators. The Directive determines the framework for the return and
recycling of used batteries and accumulators as applicable throughout the European
Union. This label is applied to various batteries to indicate that the battery is not to
be thrown away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators
are labeled to indicate that they are to be collected separately and recycled at end
of life. The label on the battery may also include a chemical symbol for the metal
concerned in the battery (Pb for lead, Hg for mercury and Cd for cadmium). Users
of batteries and accumulators must not dispose of batteries and accumulators as
unsorted municipal waste, but use the collection framework available to customers
for the return, recycling and treatment of batteries and accumulators. Customer
participation is important to minimize any potential effects of batteries and
accumulators on the environment and human health due to the potential presence
of hazardous substances. For proper collection and treatment, contact your local
IBM representative.
For California:
Perchlorate material – special handling may apply
Refer to http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
The foregoing notice is provided in accordance with California Code of Regulations
Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate
Materials. This product/part includes a lithium manganese dioxide battery which
contains a perchlorate substance.
Appendix B. Notices
131
Updated October 16, 2007
Flat panel displays
The fluorescent lamp in the liquid crystal display contains mercury. Dispose of it as
required by local ordinances and regulations.
Monitors
Connecticut - Please see the web site of the Department of Environmental
Protection at http://www.ct.gov/dep for information about recycling covered
electronic devices in the State of Connecticut, or telephone the Connecticut
Department of Environmental Protection at 1-860-424-3000.
Washington - Please see the web site of the Department of Ecology at
http://1800recycle.wa.gov/ for information about recycling covered electronic devices
in the State of Washington, or telephone the Washington Department of Ecology at
1-800Recycle.
Trademarks
The following are trademarks of International Business Machines Corporation in the
United States or other countries, or both:
AnyPlace Kiosk(tm)
AnyPlace POS Hub(tm)
DB2
DB2 Universal Database
IBM and the IBM logo
PS/2
SureMark
SurePoint
SurePOS
Wake on LAN
WebSphere
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of
Microsoft Corporation in the United States, other countries, or both.
Celeron and Intel are trademarks of Intel corporation in the United States, or other
countries.
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States, or other countries, or
both.
Other company, product, or service names may be trademarks or service marks of
others.
132
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Index
A
acceptor, bill 26
acceptor, coin 24
accessibility of publications
countertop 44
coupon acceptor
vii
D
B
bag rack 73
bagging 68
bagging cabinet, Models 152, 602, and 612
bagging cabinet, Models 153, 603, and 613
bagging cabinet, Models 171, 800, and 810
bagging cabinet, N54 116
battery
sealed lead acid, recycling viii
battery return program 130
battery, European Union 131
bill acceptor 26
bill dispenser 6
bill dispenser cassette 16
bill dispenser communications 18
bill dispenser lower unit 14
bill dispenser main unit 9
bill dispenser power 18
BOSS 77
bumpers, Models 171, 800, and 810 120
112
114
118
© Copyright IBM Corp. 2006, 2007
damage from electrostatic discharge 129
detectors, Models 171, 800, and 810 122
dispenser communications, bill 18
dispenser power, bill 18
dispenser, bill 6
dispenser, cassette bill 16
dispenser, coin 20
dispenser, lower unit bill 14
dispenser, main unit bill 9
disposal of equipment viii, 129
E
electronic emissions notices 127
Australia and New Zealand 128
European Union 127
FCC (USA) 127
Germany 128
Industry Canada 128
Japan 128
electrostatic discharge (ESD) 129
emitters, Models 171, 800, and 810 122
end of life disposal viii, 129
EPO button 85
equipment disposal viii, 129
C
cabinet parts 105
cabinet, core module 106
cabinet, Models 152, 602, and 612 bagging
cabinet, Models 153, 603, and 613 bagging
cabinet, Models 171, 800, and 810 bagging
cabinet 118
cabinet, N54 bagging cabinet 116
cabinet, security conveyor 110
cabinet, transport conveyor 110
cable ferrite requirement 129
cables 89, 90
capture, signature 46
cassette, bill dispenser 16
CD-ROM vii
cell, load 53
Class A compliance statement
Australia and New Zealand 128
European Union 127
FCC (USA) 127
Germany 128
Industry Canada 128
Japan 128
coin acceptor 24
coin dispenser 20
conveyor, security 59, 60
conveyor, transport 64
core module 1
core module cabinet 106
46
112
114
F
ferrite requirement 129
field kits 101
flat panel displays 132
H
how to use this manual
v
J
Japanese power line harmonics compliance
statement 128
Japanese Voluntary Control Council for Interference
statement 129
K
keys 95
kits, field 101
133
Updated October 16, 2007
L
U
lane light 48
lane PC 50
light, lane 48
load cell 53
locks 95
lower unit, bill dispenser
using this manual
W
Web site vii
wire bag rack
14
M
main unit, bill dispenser 9
mercury-added statement 132
module, core 1
N
notices 125
battery recycling 130
cable ferrites 129
electronic emissions 127
electrostatic discharge (ESD)
end of life disposal 129
IBM 125
129
O
order separators, Models 171, 800, and 810
120
P
Paystation, integrated 81
PC, lane 50
perchlorate 131
power cords 92
publications, related vi
R
recycling
sealed lead acid battery
Red (EPO) button 85
related publications vi
viii
S
safety vii
safety information vii
security conveyor 59, 60
security conveyor cabinet 110
sensors, Models 171, 800, and 810 122
signature capture 46
soft goods shelf, Models 171, 800, and 810
120
T
Taiwanese battery recycling statement
trademarks 132
transport conveyor 64
transport conveyor cabinet 110
134
130
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
73
v
Updated October 16, 2007
Part number index
Part
Number
Asm–
Index
Page
01L1637
03N6669
04G5389
10N9421
10N9422
10N9428
10N9431
10N9432
10N9434
10N9435
10N9437
10N9439
10N9440
10N9441
12R9478
14J1054
23K8035
28R3172
28R3172
28R3173
28R3189
28R3190
28R3191
28R3192
28R3194
28R3194
28R3195
28R3195
28R3196
28R3196
28R3197
28R3197
28R3274
28R3275
28R3275
28R3276
28R3277
28R3278
28R3279
28R3279
28R3283
28R3283
28R3284
28R3284
28R3285
28R3285
28R3292
28R3298
28R3298
28R3559
1–
21–3
5–9
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
36–20
1–
28–
24–22
25–12
27–1
25–2
24–21
24–15
24–17
24–16
25–19
24–20
25–16
24–5
25–1
24–27
25–7
25–2
24–6
25–6
24–21
24–15
24–17
24–18
25–5
24–10
25–10
24–7
25–11
24–8
25–9
10–3
24–6
25–6
1–
3
51
13
51
51
51
51
51
51
51
51
51
51
51
107
3
79
61
65
75
65
61
61
61
61
65
61
65
61
65
62
65
65
61
65
61
61
61
61
65
61
65
61
65
61
65
25
61
65
4
© Copyright IBM Corp. 2006, 2007
Part
Number
Asm–
Index
Page
28R3559
28R3559
28R3565
28R3587
28R3589
28R3595
28R3678
28R3679
28R3680
28R3684
28R3684
28R3786
28R5399
28R5455
28R5466
28R5540
28R5566
32N1205
32N1206
32N1207
32N1208
32N1209
32N1210
32N1216
32N1218
32N1220
32N1224
32N1236
39M5073
39M5081
39M5107
39M5177
39M5374
39M5376
39M5377
40M9341
40M9342
40M9343
40M9366
40M9400
40M9400
40M9423
40M9423
40M9469
40M9470
40M9470
40M9472
40M9472
40N4716
40N5606
31–12
31–13
31–11
1–37
31–14
1–
9–15
9–15
9–15
11–5
31–26
1–14
9–15
1–4
9–15
27–2
10–
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
21–2
32–2
9–
32–1
32–3
8–1
1–
9–
11–
11–
11–
1–4
31–6
8–2
24–
31–15
1–3
1–2
31–8
1–23
31–3
1–
8–
91
91
91
4
91
4
22
22
22
27
91
3
22
3
22
75
25
51
51
51
51
51
51
51
51
51
51
51
93
22
93
93
19
4
22
27
27
27
3
91
19
62
91
3
3
91
4
91
4
19
135
Updated October 16, 2007
Part
Number
Asm–
Index
40N6220
40N6224
41A3391
41D1011
41D1013
41D1015
41D1017
41D1337
41D7009
41D7043
41D7045
41D7047
41D7051
41D7053
41D7053
41D7061
41D7068
41D7072
41D7073
41D7073
41D7073
41D7073
41D7073
41D7073
41D7073
41D7073
41D7073
41D7075
41D7076
41D7078
41D7080
41D7082
41D7083
41D7101
41D7103
41D7105
41D7107
41D7109
41D7111
41D7113
41D7115
41D7117
41D7119
41D7121
41D7123
41D7125
41D7125
41D7127
41D7129
41D7131
41D7133
41D7135
41D7137
1–5
1–5
28–
17–2
17–2
17–2
17–2
19–
35–
9–
9–
9–
9–
2–7
7–
16–17
1–34
31–
1–
22–
31–
31–16
31–17
31–18
31–19
31–2
31–22
31–
9–4
9–4
1–18B
1–18C
1–14
35–
5–2
4–1
5–3
5–8
5–7
5–6
7–1
7–3
3–2
6–5
2–
5–5
6–7
2–
7–
7–6
3–5
2–3A
2–4
136
Page
Part
Number
Asm–
Index
Page
3
3
79
43
43
43
43
47
103
21
21
21
21
7
17
41
4
91
4
55
91
91
91
91
91
91
91
91
21
21
4
4
3
104
13
11
13
13
13
13
17
17
9
15
7
13
15
7
17
17
9
7
7
41D7139
41D7142
41D7144
41D7146
41D7150
41D7155
41D7156
41D7161
41D7163
41D7169
41D7211
41D7213
41D7215
41D7217
41D7242
41D7246
41D7248
41D7249
41D7250
41D7251
41D7252
41D7253
41D7254
41D7320
41D7323
41D7324
41D7344
41D7391
41D7403
41D7404
41D7424
41D7426
41D7428
41D7430
41D7448
41D7451
41D7453
41D7557
41D7563
41D7563
41D7586
41D7588
41D7595
41D7596
41D7610
41D7621
41D7621
41D7622
41D7634
41D7635
41D7636
41D7656
41D7667
2–5
16–15
16–16
25–15
25–21
16–4
16–5
18–6
18–16
16–
1–
2–6
2–8
6–3
17–
16–7
11–4
11–2
11–
11–3
11–2
11–3
11–
29–2
23–1
23–
36–19
29–1
9–
9–
20–
20–
20–
20–
22–1
22–1
22–1
20–
5–4
6–6
16–8
16–
16–
21–
5–9
22–
26–
22–1
16–18
23–3
23–2
20–
23–5
7
41
41
65
65
41
41
45
45
41
3
7
7
15
43
41
27
27
27
27
27
27
27
83
57
57
107
83
22
22
49
49
49
49
55
55
55
49
13
15
41
41
41
51
13
55
71
55
41
57
57
49
57
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Part
Number
Asm–
Index
Page
Part
Number
Asm–
Index
Page
41D7669
41D7671
41D7680
41D7704
41D7706
41D7767
41D7775
41D7813
41D7815
41D7977
41D8051
41D8054
41D8056
41D8060
41D8062
41D8114
41D8116
41D8118
41D8119
41D8143
41D8184
41D8185
41D8187
41D8188
41D8190
41D8192
41D8193
41D8194
41D8195
41D8196
41D8199
41D8229
41D8231
41D8291
41D8382
41D8383
41D8391
41D8445
41D8448
41D8449
41D8555
41D8557
41D8560
41D8573
41D8576
41D8579
41D8628
41D8630
41D8764
41D8766
41D8768
41D8770
41D8772
23–6
23–7
16–9
20–2
20–2
16–11
1–
9–6
9–6
20–2
10–1
20–
20–
9–18
9–18
19–4
29–
29–
41–
16–14
23–
26–
26–
22–1
26–
26–
26–
26–7
26–4
23–
2–11
9–17
9–16
22–
36–
36–
16–10
17–2
17–2
17–
20–
20–
27–
15–1
15–4
15–3
18–5
18–14
42–
42–
42–
42–
42–3
57
57
41
49
49
41
4
21
21
49
25
49
49
22
22
47
83
83
119
41
57
71
71
55
71
71
71
71
71
57
7
22
22
55
107
107
41
43
43
43
49
49
75
39
39
39
45
45
121
121
121
121
121
41D8772
41D8774
41D8776
41D8778
41D8780
41D9327
41D9329
41D9330
41D9345
41D9346
41D9347
41D9348
41D9349
41D9350
41D9351
41D9352
41D9353
41D9354
41D9355
41D9359
41D9361
41D9435
41D9560
41D9561
41D9626
41D9628
41D9631
41D9642
41D9644
41D9648
41D9650
41D9653
41D9653
41D9655
41D9655
41D9700
41D9701
41D9702
41D9703
41D9744
41D9769
41D9782
41D9783
41D9783
41D9784
41D9785
41D9786
41D9787
41D9788
41D9803
41D9804
41D9816
41D9818
42–4
42–5
42–6
42–7
42–8
23–
1–25
1–29
10–1
10–1
10–1
10–1
10–1
35–
35–
35–
35–
35–
35–
1–34
31–22
17–
19–1
19–15
18–7
18–15
35–
12–
12–
12–
12–
13–
13–
13–
13–
11–2
11–2
11–2
11–2
26–3
25–3
24–3
24–14
24–24
24–32
24–30
24–30
24–33
24–33
24–30
24–30
24–4
25–4
121
121
121
121
121
57
4
4
25
25
25
25
25
104
104
104
104
104
104
4
91
43
47
47
45
45
104
29
30
29
29
33
33
33
34
27
27
27
27
71
65
61
61
62
62
62
62
62
62
62
62
61
65
Part number index
137
Updated October 16, 2007
Part
Number
Asm–
Index
Page
Part
Number
Asm–
Index
Page
41D9820
41D9822
41D9876
41E1449
41E1619
41E1748
41E1749
41E1829
41E1830
41E1830
41E1831
41E1831
41E1832
41E1849
41E1850
41E1851
41E1854
41E1855
41E1858
41E1859
41E1861
41E1862
41E1863
41E1864
41E1865
41E1865
41E1866
41J6659
41J6735
41J6736
41J6737
41J6738
41J6739
41J6745
41J6746
41J6747
41J6748
41J6749
41J6750
41J6928
41J6930
41J6934
41J7093
41J7094
41J7126
41J7126
41J7127
41J7127
41J7193
41J7417
41J7425
41J7426
41J7432
25–4
24–4
16–19
11–
31–21
24–
24–
19–6
19–
31–5
19–
31–4
1–
1–11
1–12
1–9
19–5
19–5
18–1
18–11
18–3
18–13
19–
19–
1–39
20–
2–1
36–48
10–1
10–1
10–1
10–1
10–1
18–9
18–4
18–2
18–17
18–10
18–12
25–14
22–
22–
19–14
19–13
25–
42–1
25–
42–1
16–6
22–
25–20
25–13
24–
65
61
41
27
91
62
62
47
47
91
47
91
4
3
3
3
47
47
45
45
45
45
47
47
4
49
7
107
25
25
25
25
25
45
45
45
45
45
45
65
55
55
47
47
65
121
65
121
41
55
65
65
61
41J7434
41J7436
41J7438
41J7440
41J7442
41J7444
41J7446
41J7448
41J7448
41J7450
41J7450
41J7452
41J7533
41J7536
41J7615
41J7616
41J7617
41J7618
41J7619
41J7620
41J7621
41J7622
41J7623
41J7624
41J7625
41J7626
41J7627
41J7628
41J7629
41J7630
41J7631
41J7632
41J7633
41J7634
41J7635
41J7636
41J7637
41J7638
41J7639
41J7640
41J7641
41J7642
41J7643
41J7644
41J7645
41J7646
41J7648
41J7649
41J7651
41J7654
41J7655
41J7658
41J7659
25–
24–
25–
24–
25–
24–
25–
24–19
25–17
24–19
25–17
31–
18–8
18–18
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–1
9–
9–
9–
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–9
9–10
9–11
65
61
65
61
65
61
65
61
65
61
65
91
45
45
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
22
22
22
21
21
21
21
21
21
21
21
21
21
21
21
22
22
22
22
138
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Updated October 16, 2007
Part
Number
Asm–
Index
Page
Part
Number
Asm–
Index
Page
41J7666
41J7666
41J7676
41J7678
41J7731
41J7798
41J8076
41J8193
41J8194
41J8195
41J8231
41J8332
41J8334
41J8336
41J8336
41J8338
41J8340
41J8342
41J8344
41J8393
41J8414
41J8438
41J8450
41J8452
41J8791
41J8807
41J8807
41J8807
41J8807
41J8807
41J8807
41J8809
41J8809
41J8809
41J8809
41J8848
41J8850
41J8854
41J8854
41J8855
41J8856
41J8867
41J8869
41J8883
41J8896
41J9127
41J9135
41J9154
41J9157
41J9289
41J9295
41J9296
41J9297
24–9
25–8
24–
24–28
31–23
19–7
10–7
20–
20–
20–
10–2
25–18
25–18
24–
25–
24–18
24–2
24–25
24–12
32–4
24–
25–5
25–15
25–21
24–1
12–4
12–4
13–7
13–7
14–3
14–3
12–4
12–4
13–7
13–7
24–2
24–13
24–
25–
25–
25–
24–3
24–23
16–1
24–1
24–2
1–32
16–13
16–12
19–8
1–4
1–4
1–4
61
65
62
62
91
47
25
49
49
49
25
65
65
62
65
61
61
62
61
93
62
65
65
65
61
29
29
33
33
37
37
29
29
33
33
61
61
61
65
65
65
61
62
41
61
61
4
41
41
47
3
3
3
41J9298
41J9310
41J9312
41J9318
41J9320
41J9330
41J9416
41J9416
41J9418
41J9418
41J9418
41J9418
41J9438
41J9440
41J9440
41J9442
41J9444
41J9447
41J9447
41J9449
41J9449
41J9449
41J9449
41J9452
41J9452
41J9452
41J9452
41J9454
41J9454
41J9454
41J9454
41J9454
41J9454
41J9457
41J9457
41J9457
41J9457
41J9459
41J9459
41J9459
41J9459
41J9459
41J9459
41J9461
41J9463
41J9463
41J9465
41J9467
41J9513
41J9515
41J9518
41J9520
41J9523
1–4
25–4
24–4
25–4
24–4
11–
12–8
12–8
12–8
12–8
14–9
14–9
12–6
12–6
14–5
12–1
12–1
12–5
12–5
12–5
12–5
14–6
14–6
12–7
12–7
13–1
13–1
12–7
12–7
13–1
13–1
14–4
14–4
12–3
12–3
13–4
13–4
12–3
12–3
13–4
13–4
14–2
14–2
12–6
12–6
14–5
12–1
12–1
13–6
13–6
13–6
13–6
13–10
3
65
61
65
61
27
29
29
29
30
37
37
29
29
37
29
29
29
29
29
29
37
37
29
29
33
33
29
29
33
33
37
37
29
29
33
33
29
29
33
33
37
37
29
29
37
29
29
33
33
33
33
33
Part number index
139
Updated October 16, 2007
Part
Number
Asm–
Index
Page
Part
Number
Asm–
Index
41J9525
41J9528
41J9530
41J9533
41J9533
41J9535
41J9535
41J9538
41J9538
41J9540
41J9540
41J9542
41J9544
41J9546
41J9660
41J9662
41J9666
41J9670
41J9748
41J9750
41J9751
41J9752
41J9765
41J9770
41J9770
41J9770
41J9770
41J9772
41J9772
41J9772
41J9772
41J9812
41J9817
41J9835
41J9838
41J9839
41J9841
41J9845
41J9845
41J9849
41J9849
41J9891
41J9916
41K6077
41K6080
41K6082
41K6083
41K6086
41K6087
41K6087
41K6087
41K6088
41K6088
13–10
13–10
13–10
13–2
13–2
13–2
13–2
13–8
13–8
13–8
13–8
1–38
24–29
24–29
16–3
16–2
14–1
14–1
23–4
40–
40–
40–
16–
12–2
12–2
13–9
13–9
12–2
12–2
13–9
13–9
17–2
17–2
31–
1–19
1–18
1–18
24–11
24–12
24–25
24–26
1–41
1–22
9–14
8–3
9–2
36–43
9–2
1–26
33–2
34–5
33–1
9–8
33
33
34
33
33
33
33
33
33
33
33
4
62
62
41
41
37
37
57
117
117
117
41
29
29
33
33
29
29
33
33
43
43
91
4
3
3
61
61
62
62
4
4
22
19
21
107
21
4
97
99
97
21
41K6089
41K6090
41K6094
41K6098
41K6099
41K6100
41K6102
41K6103
41K6104
41K6105
41K6106
41K6108
41K6109
41K6120
41K6120
41K6121
41K6122
41K6123
41K6124
41K6125
41K6126
41K6127
41K6128
41K6129
41K6130
41K6131
41K6132
41K6133
41K6134
41K6135
41K6136
41K6137
41K6138
41K6139
41K6140
41K6141
41K6142
41K6143
41K6144
41K6145
41K6146
41K6147
41K6148
41K6149
41K6150
41K6151
41K6152
41K6153
41K6154
41K6155
41K6156
41K6157
41K6159
1–28
1–28
34–3
34–
34–
34–
36–40
36–9
34–6
34–4
36–41
36–
11–6
1–27
33–4
33–4
33–4
33–4
33–4
33–4
33–4
33–4
33–4
33–4
33–5
33–5
33–5
33–5
33–5
33–5
33–5
33–5
33–5
33–5
36–42
36–42
36–44
36–46
36–45
36–46
36–45
36–
36–13
36–17
36–15
36–30
36–30
36–30A
36–24
36–24
36–25
36–32
36–
140
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
Page
4
4
99
99
99
99
107
107
99
99
107
107
27
4
97
97
97
97
97
97
97
97
97
97
97
97
97
97
97
97
97
97
97
97
107
107
107
107
107
107
107
108
107
107
107
107
107
107
107
107
107
107
107
Updated October 16, 2007
Part
Number
Asm–
Index
Page
Part
Number
Asm–
Index
Page
41K6160
41K6161
41K6162
41K6163
41K6164
41K6165
41K6166
41K6167
41K6168
41K6284
41K6289
41K6290
41K6291
41K6298
41K6300
41K6301
41K6303
41K6306
41K6307
41K6308
41K6309
41K6318
41K6319
41K6322
41K6352
41K6352
41K6353
41K6354
41K6354
41K6355
41K6356
41K6359
41K6359
41K6363
41K6363
41K6364
41K6364
41K6365
41K6367
41K6368
41K6368
41K6369
41K6369
41K6370
41K6370
41K6371
41K6379
41K6382
41K6382
41K6382
41K6384
41K6385
41K6386
10–9
1–35
36–26
36–26
36–11
36–
1–30
36–22
36–22
35–
3–1
3–4
6–9
7–2
7–4
7–5
3–3
6–2
6–4
6–1
6–8
2–2
2–3
7–8
31–24
9–
9–13
10–
31–27
1–18
1–18
10–
31–27
10–10
9–5
10–10
9–5
31–25
19–9
1–
31–9
1–
31–29
1–
31–28
20–1
42–2
37–20
37–22
38–
41–11
41–10
41–9
25
4
107
107
107
107
4
107
107
104
9
9
15
17
17
17
9
15
15
15
15
7
7
17
91
22
22
25
91
4
4
25
91
25
21
25
21
91
47
4
91
4
91
3
91
49
121
111
111
113
119
119
119
41K6387
41K6388
41K6391
41K6398
41K6399
41K6572
41K6576
41K6585
41K6593
41K6595
41K6597
41K6600
41K7080
41K7082
41K7093
41K7207
41K7208
41K7209
41K7210
41K7211
42H1161
42H1161
42K0050
42K0051
42K0052
42K0053
42K0056
42K0057
42K0058
42K0061
42K0062
42K0063
42K0064
42K0068
42K0080
42K0081
42K0082
42K0083
42K0084
42K0085
42K0086
42K0087
42K0088
42K0089
42K0090
42K0091
42K0092
42K0093
42K0094
42K0095
42K0096
42K0097
42K0098
41–
41–2
41–4
2–9
2–10
36–
19–2
34–2
10–6
36–
34–4
36–12
30–2
30–1
27–3
9–14
9–14
9–14
9–14
9–14
24–
25–
36–
36–31
10–4
10–4
36–3
36–29
10–7
7–7
7–7
7–7
7–7
36–5
34–1
34–1
34–1
34–1
34–1
34–1
34–1
34–1
34–1
34–1
34–
34–
34–
34–
34–
34–
34–
34–
34–
119
119
119
7
7
107
47
99
25
107
99
107
87
87
75
22
22
22
22
22
62
65
108
107
25
25
107
107
25
17
17
17
17
107
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
Part number index
141
Updated October 16, 2007
|
Part
Number
Asm–
Index
Page
42K0099
42K0355
42K0356
42K0357
42K0358
42K0358
42K0359
42K0360
42M5632
42M5667
44D0241
44D0243
44D0244
44D0245
44D0246
44D0252
44D0254
44D0256
44D0258
44D0260
44D0262
44D0264
44D0265
44D0266
44D0274
44D0347
44D0359
44D0361
44D0381
44D0381
44D0405
44D0407
44D0412
44D0421
44D0448
44D0533
44D0534
44D0750
44D0852
44D0853
44D0854
44D0855
44D0856
44D0857
44D0859
44D0860
44D0861
44D0862
44D0872
44D0874
44D0920
44D0922
34–
10–5
1–16
19–11
1–17
19–10
10–5
1–16
1–
1–
17–1A
17–1B
33–3
10–8
10–8
15–1
15–4
15–3
11–1
11–7
11–8
41–1
41–
41–
41–
16–20
15–2
15–2
15–5
15–5
25–
25–
35–
20–2
1–
35–
35–
19–1
42–
42–
41–14
41–
41–
41–
38–5
39–3
29–3
29–4
1–
1–
15–
15–
99
25
3
47
3
47
25
3
3
3
43
43
97
25
25
39
39
39
27
27
27
119
119
119
119
41
39
39
39
39
65
65
104
49
4
104
104
47
121
121
119
119
119
119
113
115
83
83
4
4
39
39
142
|
|
|
Part
Number
Asm–
Index
Page
44D0987
44D0989
44D0991
44D1022
44D1023
44D1125
44D1130
44D1131
44D1151
44D1151
44D1157
44D1161
44D1165
44D1232
44D1294
44D1296
44D1337
44D1363
44D1363
44D1364
44D1365
44D1366
44D1606
44D1776
44M1624
44M1643
44M1749
44M1840
44M1846
44M1884
44M1886
44M1899
44M1900
44M1901
44M1902
44M1913
44M1914
44M1959
44M1961
44M1975
44M1976
44M1977
44M1992
44M1995
44M2123
44M2154
44M2155
44M2189
44M2232
NA
NA
NA
19–1
19–
19–
19–
19–
1–
19–
19–
38–4
39–1
1–4
19–
31–20
20–
9–
9–9
19–12
38–1
39–7
39–2
38–7
38–
35–
35–
43–11
31–
41–
7–9
1–4
20–
20–
25–
25–
19–3
19–3
25–18
25–18
36–47
36–47
26–8
26–9
26–10
41–
41–3
41–
35–
35–
24–32
24–34
31–1
31–10
31–7
47
47
47
47
47
4
47
47
113
115
3
47
91
49
21
21
47
113
115
115
113
113
104
104
123
91
119
17
3
49
49
65
65
47
47
65
65
107
107
71
71
71
119
119
119
104
104
62
62
91
91
91
Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
򔻐򗗠򙳰
Updated October 16, 2007
S131-0106-02

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project