Strand Lighting 1-214-647-7880
The Light Pack IGBT Dimming Module can be mounted in a variety of configurations. Depending on
your requirements, choose one of the methods shown below. The module can be mounted vertically
(recommended) or horizontally as required, however, to allow for optimum convection cooling, it
CANNOT be mounted with the heatsink fins downward.
SIDE
VIEW
CAUTION: A safety cable is supplied with the Yoke and Pipe mounts. The safety cable must be
secured to the fixture or structure and may be required by local codes.
Yoke Mount (Strand #71340)
TOP VIEW
Step 1. Attach yoke-mount bracket to Light Pack module.
Step 2. Fit bracket onto fixture yoke.
Step 3. Tighten threaded attachment knob to secure in
place.
Step 4. Install safety cable securely to fixture or structure.
Yoke-Mount
Bracket
4 Each, No. 8-32 Thread
8-32 x .25” Long (Max)
82° Flat Head
Wall Mount (Strand #71341)
Yoke
Bracket
Knob
Screw
Step 1. Attach wall-mount bracket to Light Pack module.
Step 2. At wall, locate suitable installation position.
Step 3. Using Light Pack mounting bracket as template, mark
holes for drilling.
Step 4. Drill mounting holes and secure Light Pack module to wall.
SIDE VIEW
Wall
Mounting Holes
Pipe Mount (Strand #71342)
Bracket
Knob
OR
Pipe
Step 1. Attach threaded knob or C-clamp (not supplied) to Light Pack
mounting bracket.
Step 2. Fit bracket over pipe*.
Step 3. Tighten knob (or clamp) to secure in place.
Step 4. Install safety cable securely around pipe or structure.
C-Clamp
(not supplied)
Bracket
Pipe
* Mounts to 1.5" Schedule 40 pipe or 2" aluminum tube truss.
2 YEAR LIMITED WARRANTY
Strand Lighting warrants that this product will be free from defects in workmanship or materials. This warranty is void on any electronic controls which have
been overloaded, abused, improperly installed or altered in any manner.
Strand Lighting’s sole obligation will be at its option to repair or replace any electronic controls product proven defective if it is returned, postage prepaid, to
Strand Lighting, 10911 Petal Street, Dallas, Texas 75238 USA. Strand Lighting will not pay for any charge-back or charge for labor or material that does not have
its prior written approval.
This warranty shall be in lieu of any other warranty, express or implied, including but not limited to any implied warranty of merchantability or fitness for a
particular purpose. Some states do not allow limitations on how long an implied warranty lasts and do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state. Exchange of products covered by warranty should be handled through your original supply source.
Light Pack IGBT Dimming Module Mounting Guide | Document Number: 85-6230 | Version as of 21 June 2011
Strand Lighting
10911 Petal Street
Dallas, Texas 75238
1-214-647-7880 main
1-214-647-8031 fax
For technical/sales assistance call:
1-214-647-7880
www.strandlighting.com
©2011 Philips Group
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement