advertisement
OPERATOR’S MANUAL
HEAVY-DUTY CARTS
66554-1
(For 4-1/4” and 6” Pumps)
66554-2
(For 8” and 10” Pumps)
66554-X
RELEASED: 2-13-78
REVISED:
(REV. B)
10-6-00
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
INGERSOLL-RAND COMPANY
P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 43506Ć0151
&
(419) 636-4242 D FAX (419) 633-1674 E
2000 D PRINTED IN U.S.A.
ASSEMBLY INSTRUCTIONS
1. Insert (4) leg (left) and (8) axle into (3) cart frame as shown in view.
2. Align the holes on the (4) leg and (8) axle to insert (7) cap screw thru
(3) cart frame. Attach (11) flat washer, (12) lockwasher and (13) nut.
6. Attach (23) or (17) bracket to (3) cart frame using two (16) cap screws, (11) flat washers, (12) lockwashers and (13) nuts.
NOTE: Two position holes are located in (8) axle to facilitate optional wheel spacing. Maximum wheel spacing is for stability.
NOTE: Select a set ofholes that will give pump, that will be used, deĆ sired clearance with floor.
3. Place two (9) washers onto (8) axle with (1) wheel.
4. Attach (10) retaining ring to groove in (8) axle.
5. Repeat steps 1 thru 4 to attach (2) leg (right) and (1) wheel to (3) cart frame.
7. Attach (15) handle to (23) or (17) bracket using four (14) cap screws, (11) flat washers, (12) lockwashers and (13) nuts.
8. Mount (21) or (22) plate on pump to be used. Then place on (23) or
(17) bracket and fasten using (20) cap screws, (19) lockwashers and (18) flat washers.
ITEM DESCRIPTION (Size in Inches)
1 Wheel
2 Leg (right)
3 Cart Frame
4 Leg (left)
5 Washer
6 Plastic Cap
7 Screw, Cap (1/2" Ć 13 x 5")
8 Axle
9 Washer
10 Retaining Ring
11 Washer, Flat
12 Lockwasher (1/2")
13 Nut (1/2" Ć 13)
14 Screw, Cap (1/2" Ć 13 x 2")
15 Handle
16 Screw, Cap (1/2" Ć 13 x 1")
PARTS LIST
QTY PART NO.
(2) 91515
(1) 99306
(1) 66555
(1) 99305
(2) 70607
(2) 77366
(2) Y6Ć819ĆC
(2) 99304
(4) 91522
(2) 99310
(8) F15Ć27ĆC
(8) Y14Ć816
(8) Y12Ć8ĆC
(4) Y6Ć89ĆC
(1) 99303
(2) Y6Ć85ĆC
ITEM DESCRIPTION (Size in Inches) QTY PART NO.
17 Bracket (model 66554Ć1only) (1) 66367
18 Washer, Flat (1/4") (model 66554Ć1 only) (4) Y13Ć4ĆC
(model 66554Ć2 only) (6) Y13Ć4ĆC
19 Lockwasher (1/4") (model 66554Ć1 only) (4) Y14Ć416
(model 66554Ć2 only) (6) Y14Ć416
20 Screw, Cap (1/4" Ć 20 x 5/8") (66554Ć1) (4) Y6Ć42ĆC
(model 66554Ć2 only) (6) Y6Ć42ĆC
21 Plate (model 66554Ć1only)
22 Plate (model 66554Ć2 only)
23 Bracket (model 66554Ć2 only)
* 24 Cap Screw (3/8" Ć 16 x 1Ć1/2")
* 25 Nut (3/8" Ć 16) (model 66554Ć1 only)
* 26 Nut (3/8" Ć 16) (model 66554Ć2 only)
* 27 Washer (3/8") (model 66554Ć2 only)
* 28 Lockwasher (3/8")
* Included but not shown
(1) 91396
(1) 92371
(1) 66543
(4) Y6Ć67ĆC
(4) Y12Ć6ĆC
(4) Y12Ć106ĆC
(4) Y13Ć6ĆC
(4) Y14Ć616
2 OF 4 66554ĆX
66554ĆX
23
22
21
20
19
18
PARTS LIST
20
19
18
17
13 12 11
16
2
4
5
6
1
3
14
15
7
8
9
1 3 1 2 11
13
12
11
10
3 OF 4
CART DIMENSION DATA
51" Approx. Max. Height
(1295 mm)
44" Approx. Min. Height
(1118 mm)
28" Approx.
(711 mm)
24" Approx. Min. Width
(610 mm)
30" Approx. Max. Width
(762 mm)
4 OF 4
PN 97999Ć574
66554ĆX
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project