mobile monitor series designed to perform

mobile monitor series designed to perform
MOBILE MONITOR SERIES
DESIGNED TO PERFORM
COAXIALS • SYSTEMS • SUBWOOFERS
“Hats off to the engineers at Polk—
the MM1240 is definitely a winner…”
—Dave MacKinnon, Performance Auto & Sound,
August 2008
MM Series: Designed to Perform
MM Series Full Range Speakers.
All the performance without the weight.
MM Series full range speakers include configurations from
oval models, coaxial speakers and component systems
covering a wide variety of applications. Every component
has been meticulously optimized to bring you the best
sound quality. Compact in-line crossovers are easy to
hide and use precision components such as air core
inductors. The speaker’s 1" silk dome tweeters provide
optimal dispersion, while glass composite cones provide
superior midrange and bass punch. The speakers use
advanced materials such as neodymium magnets,
glass composite cones and carbon composite baskets.
The benefits are a lighter and slimmer speaker that
fits more applications. And less weight in your sound
system also means higher performance for your vehicle.
Woven glass composite cones feature tremendous
stiffness-to-mass ratio. Lower cone mass brings you
faster transient response and finer detail.
Large diameter voice coils (30mm) and polyamide/
fiberglass former increase reliability and power
handling so you can crank up your tunes.
Swivel tweeters on coax models allow you to precisely
direct the highs. Flush and surface mount tweeter cups
are included with component systems.
Neodymium magnets are a rare material found on both
the tweeter and driver*. It replaces the traditional bulky
ceramic magnet with a much more powerful unit at half
the weight. *except MM461P
In-line crossovers use high quality components such
as air core inductors for superior signal transfer.
The crossover is easily hidden for simple installation.
Component models feature tweeter level adjustment.
Rugged high quality grilles are included with round
models and MM691.
MM691
Polk Audio, Inc., 5601 Metro Drive, Baltimore, Maryland 21215
Customer Service 1-800-377-7655 (Worldwide: 410-358-3600)
Monday-Friday, 9AM-6PM EST, polkcs@polkaudio.com
MM Series High Performance Subwoofers.
Don’t be fooled by their light weight
and easy installation. They pound.
MM Series subwoofers are the latest and greatest.
We’ve reduced the mounting depth to near 4 1⁄2" and
raised the performance in a very small box.
Polymer woofer cones and butyl rubber surrounds
will survive the rigors of harsh automotive environments
and not break down over time.
Catenary shaped cone provides rigidity and strength.
At each point in a catenary structure, opposing tension
and compression forces are balanced. A catenary shape
maximizes the stiffness of the cone without resorting
to using more material that would add mass. The woofer
cone won’t flex giving you tight, accurate bass.
Available in single and dual voice coil configurations
allowing flexible wiring options in all sizes.
Heavy duty input terminals accommodate speaker
wire up to 8 AWG or twisted pairs of 12 AWG.
Super shallow mounting depth thanks to advanced
carbon composite basket materials. All models require
a top mounting depth around 4 1⁄2" (see spec sheet
for actual mounting depths).
Available matching grilles add style and protection
to your subwoofer.
High temperature copper voice coil (50mm)
and polyamide former withstands high powered
use while maintaining extremely low distortion
for bass punch and output.
MM1040
MM Series: Designed to Perform
“Hats off to the engineers at Polk—
the MM1240 is definitely a winner…”
—Dave MacKinnon, Performance Auto & Sound,
August 2008
MM Series: Designed to Perform
MM Series Full Range Speakers.
All the performance without the weight.
MM Series full range speakers include configurations from
oval models, coaxial speakers and component systems
covering a wide variety of applications. Every component
has been meticulously optimized to bring you the best
sound quality. Compact in-line crossovers are easy to
hide and use precision components such as air core
inductors. The speaker’s 1" silk dome tweeters provide
optimal dispersion, while glass composite cones provide
superior midrange and bass punch. The speakers use
advanced materials such as neodymium magnets,
glass composite cones and carbon composite baskets.
The benefits are a lighter and slimmer speaker that
fits more applications. And less weight in your sound
system also means higher performance for your vehicle.
Woven glass composite cones feature tremendous
stiffness-to-mass ratio. Lower cone mass brings you
faster transient response and finer detail.
Large diameter voice coils (30mm) and polyamide/
fiberglass former increase reliability and power
handling so you can crank up your tunes.
Swivel tweeters on coax models allow you to precisely
direct the highs. Flush and surface mount tweeter cups
are included with component systems.
Neodymium magnets are a rare material found on both
the tweeter and driver*. It replaces the traditional bulky
ceramic magnet with a much more powerful unit at half
the weight. *except MM461P
In-line crossovers use high quality components such
as air core inductors for superior signal transfer.
The crossover is easily hidden for simple installation.
Component models feature tweeter level adjustment.
Rugged high quality grilles are included with round
models and MM691.
MM691
Polk Audio, Inc., 5601 Metro Drive, Baltimore, Maryland 21215
Customer Service 1-800-377-7655 (Worldwide: 410-358-3600)
Monday-Friday, 9AM-6PM EST, polkcs@polkaudio.com
MM Series High Performance Subwoofers.
Don’t be fooled by their light weight
and easy installation. They pound.
MM Series subwoofers are the latest and greatest.
We’ve reduced the mounting depth to near 4 1⁄2" and
raised the performance in a very small box.
Polymer woofer cones and butyl rubber surrounds
will survive the rigors of harsh automotive environments
and not break down over time.
Catenary shaped cone provides rigidity and strength.
At each point in a catenary structure, opposing tension
and compression forces are balanced. A catenary shape
maximizes the stiffness of the cone without resorting
to using more material that would add mass. The woofer
cone won’t flex giving you tight, accurate bass.
Available in single and dual voice coil configurations
allowing flexible wiring options in all sizes.
Heavy duty input terminals accommodate speaker
wire up to 8 AWG or twisted pairs of 12 AWG.
Super shallow mounting depth thanks to advanced
carbon composite basket materials. All models require
a top mounting depth around 4 1⁄2" (see spec sheet
for actual mounting depths).
Available matching grilles add style and protection
to your subwoofer.
High temperature copper voice coil (50mm)
and polyamide former withstands high powered
use while maintaining extremely low distortion
for bass punch and output.
MM1040
MM Series: Designed to Perform
MM461P
MM521
MM571
MM651
Full Range
MM461P
4" x 6" Plate
Power Handling: 150W Peak
Power Handling: 50W RMS
Frequency Response: 70Hz - 25kHz
Sensitivity: 90dB
Impedance: 4 Ohms
Driver Complement: 3 1/2" (87.5mm) mid/woofer
Tweeter Complement: 3/4" (19mm) soft dome tweeter
Cutout Dimensions: 3 7/8" x 5 15/16" (115.6mm x 179.7mm)
Mounting Depth (top): 1 11/16" (43mm)
Mounting Depth (bottom): n/a
MM521
5 1/4" Coaxial
Power Handling: 200W Peak
Power Handling: 90W RMS
Frequency Response: 50Hz - 25kHz
Sensitivity: 92dB
Impedance: 2.7 Ohms
Driver Complement: 5 1/4" (131.03mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 4 5/8" (117mm)
Mounting Depth (top): 2 3/8" (60mm)
Mounting Depth (bottom): 2 13/16" (71mm)
MM571
5" x 7" Coaxial
Power Handling: 200W Peak
Power Handling: 90W RMS
Frequency Response: 38Hz - 25kHz
Sensitivity: 92dB
Impedance: 2.7 Ohms
Driver Complement: 5" x 7" (125mm x 175mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 4 5/8" x 7 3/16" (117.5mm x 182.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 3" (76mm)
MM651
6 1/2" Coaxial
Power Handling: 200W Peak
Power Handling: 100W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 94dB
Impedance: 2.7 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16" (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM691
6" x 9" 3-Way
Power Handling: 300W Peak
Power Handling: 125W RMS
Frequency Response: 30Hz - 25kHz
Sensitivity: 94dB
Impedance: 2.7 Ohms
Driver Complement: 6" x 9" (150mm x 225mm) mid/woofer
Tweeter Complement: (1) 3/4" (19mm) & (1) 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/2" x 8 3/8" (140mm x 213mm)
Mounting Depth (top): 3 3/16" (81mm)
Mounting Depth (bottom): 3 1/2" (89mm)
MM5251
5 1/4" Component
System
Power Handling: 200W Peak
Power Handling: 90W RMS
Frequency Response: 50Hz - 25kHz
Sensitivity: 92dB
Impedance: 2.7 Ohms
Driver Complement: 5 1/4" (131.03mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 4 5/8" (117.5mm)
Mounting Depth (top): 2 3/8" (60mm)
Mounting Depth (bottom): 2 13/16" (71mm)
MM6501
6 1/2" Component
System
Power Handling: 250W Peak
Power Handling: 125W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 94dB
Impedance: 2.7 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16" (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM691
MM5251
Polk Audio, Inc., 5601 Metro Drive, Baltimore, Maryland 21215
MM6501
Customer Service 1-800-377-7655 (Worldwide: 410-358-3600)
Monday-Friday, 9AM-6PM EST, polkcs@polkaudio.com
MM840 & MM840DVC
MM1040 & MM1040DVC
MM1240 & MM1240DVC
MM1540 & MM1540DVC
Subwoofer
MM840
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 1/8" (105mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 2.3mH
Qms: 5.5
Qes: 0.7
Qts: 0.6
Vas: 0.54ft3 (15.4L)
Sd: 35.65in2 (230cm2)
MM840DVC
Dual 4 Ω Voice Coil
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 1/8" (105mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 2.47mH
Qms: 5.5
Qes: 0.62
Qts: 0.59
Vas: 0.55ft3 (15.8L)
Sd: 35.65in2 (230cm2)
MM1040
10" Subwoofer
Power Handling: 700W Peak
Power Handling: 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 1/2" (114mm)
Mounting Depth (bottom mount): 5 1/8" (130mm)
Cutout Diameter: 9 1/16" (230mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 3.0
Qes: 0.53
Qts: 0.45
Vas: 0.65ft3 (18L)
Sd: 54.25in2 (350cm2)
MM1040DVC
Dual 4 Ω Voice Coil
10" Subwoofer
Power Handling: 700W Peak
Power Handling: 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 1/2" (114mm)
Mounting Depth (bottom mount): 5 1/8" (130mm)
Cutout Diameter: 9 1/16" (230mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 5.1mH
Qms: 3.0
Qes: 0.59
Qts: 0.5
Vas: 0.65ft3 (18L)
Sd: 54.25in2 (350cm2)
MM1240
12" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 22Hz - 200Hz
Sensitivity: 92dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 11" (279mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 5.5
Qes: 0.63
Qts: 0.53
Vas: 1.3ft3 (38L)
Sd: 80.6in2 (520cm2)
MM1240DVC
Dual 4 Ω Voice Coil
12" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 22Hz - 200Hz
Sensitivity: 92dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 11" (279mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 5.1mH
Qms: 5.0
Qes: 0.70
Qts: 0.6
Vas: 1.3ft3 (38L)
Sd: 80.6in2 (520cm2)
MM1540
15" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 18Hz - 150Hz
Sensitivity: 93dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 13 7/8" (352mm)
Fs (Hz): 27Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 5.0
Qes: 0.56
Qts: 0.5
Vas: 3.5.ft3 (100L)
Sd: 128.5in2 (829cm2)
MM1540DVC
Dual 4 Ω Voice Coil
15" Subwoofer
Power Handling: 850W Peak
Power Handling: 425W RMS
Frequency Response: 18Hz - 150Hz
Sensitivity: 93dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 1/4" (133mm)
Cutout Diameter: 13 7/8" (352mm)
Fs (Hz): 27Hz
Re: 6.25 Ohms
Le: 5.1mH
Qms: 5.0
Qes: 0.56
Qts: 0.5
Vas: 3.5.ft3 (100L)
Sd: 128.5in2 (829cm2)
MM Series: Designed to Perform
Ultra Performance.
Ultra Reliability. Ultra Marine.
Although any of the MM Series may be used in a marine
environment, we’ve made five premium models specifically
for use on boats and other watercraft. With a 6 1/2" coaxial,
a 6 1/2" component, two 8" subwoofers and a 10" subwoofer
available, you can put together a complete on-the-water
system. We’ve thoroughly tested them in the lab and out
on the open sea to make sure they’ll sound great while
surviving life on water. In fact, they’re so good, top
watercraft manufacturers like Correct Craft and Sea
Ray install Polk Ultra Marine Series from their factories.
Rugged, built-on grilles provide protection and integrates
the tweeter mount—eliminating the need for a traditional
tweeter post. The front of the speaker is then completely
sealed preventing water intrusion.
Sealed crossover assembly is built into the back
of the speaker means there’s no need to find room
to hide an extra box making installation easier.
Passes the most rigorous 600 hours of salt fog
and UV testing—ATSM B117-03 standard practice
for operating salt spray (fog) apparatus, and D4329-99
standard practice for fluorescent UV exposure of plastics—
a stringent standardized test of reliability and longevity.
In other words, they’re built like a tank.
Marine Certified means specific MM models are suitable
for use on watercraft and land vehicles. These models come
with the Ultra Marine (UM) model designator. MM Ultra Marine
speakers were subjected to a series of grueling real world and
accelerated weathering lab tests to see if they could stand up
to harsh marine and automotive environments. We exposed
them to hundreds of hours of salt fog, intense ultraviolet light
and extreme temperatures from -40° to 185° F (-40° to 85° C),
then gave them a listen. All MM Ultra Marine speakers and
subwoofers passed the torture tests with flying colors.
Stainless steel heavy duty input terminals will not
corrode or tarnish from humidity or salt water. They’ll
accept heavy gauge cable for maximum signal transfer.
MM651UM
Polk Audio, Inc., 5601 Metro Drive, Baltimore, Maryland 21215
Customer Service 1-800-377-7655 (Worldwide: 410-358-3600)
Monday-Friday, 9AM-6PM EST, polkcs@polkaudio.com
MM651UM
MM6501UM
MM840UM & MM840UM-DVC
MM1040UM
Ultra Marine
MM651UM
Ultra Marine
6 1/2" Coaxial
Power Handling: 200W Peak
Power Handling: 100W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 92dB
Impedance: 4 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16 " (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM6501UM
Ultra Marine
6 1/2" Component
System
Power Handling: 250W Peak
Power Handling: 125W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 92dB
Impedance: 4 Ohms
Driver Complement: 6 1/2" (162.5mm) mid/woofer
Tweeter Complement: 1" (25mm) soft dome tweeter
Cutout Dimensions: 5 1/16 " (128.6mm)
Mounting Depth (top): 2 5/8" (67mm)
Mounting Depth (bottom): 2 7/8" (73mm)
MM840UM
Ultra Marine
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 3.25 Ohms
Le: 2.3mH
Qms: 5.5
Qes: 0.7
Qts: 0.6
Vas: 0.54ft3 (15.4L)
Sd: 35.65in2 (230cm2)
MM840UM-DVC Ultra Marine
Dual 4 Ω Voice Coil
8" Subwoofer
Power Handling: 500W Peak
Power Handling: 250W RMS
Frequency Response: 26Hz - 200Hz
Sensitivity: 90dB
Impedance: 8 Ohms (Series);
2 Ohms (Parallel)
Oneway/Excursion (Linear): 3/4" (20mm)
Voicecoil Diameter: 1 1/2" (38.1mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 4 11/16" (119mm)
Cutout Diameter: 7 1/8" (181mm)
Fs (Hz): 35Hz
Re: 6.25 Ohms
Le: 2.47mH
Qms: 5.5
Qes: 0.62
Qts: 0.59
Vas: 0.55ft3 (15.8L)
Sd: 35.65in2 (230cm2)
MM1040UM
Power Handling: 700W Peak
Power Handling: 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 4 Ohms
Oneway/Excursion (Linear): 1" (25mm)
Voicecoil Diameter: 2" (50mm)
Mounting Depth (top mount): 4 5/8" (117.5mm)
Mounting Depth (bottom mount): 5 3/16" (132mm)
Cutout Diameter: 9 1/8" (231.8mm)
Fs (Hz): 40Hz
Re: 3.25 Ohms
Le: 3.0mH
Qms: 3.0
Qes: 0.53
Qts: 0.45
Vas: 0.65ft3 (18L)
Sd: 54.25in2 (350cm2)
Ultra Marine
10" Subwoofer
MM Series: Designed to Perform
MOBILE MONITOR SERIES
DESIGNED TO PERFORM
COAXIALS • SYSTEMS • SUBWOOFERS
MOBILE MONITOR SERIES
The best way to preview the Mobile Monitor (MM) Series
for yourself is to visit your local authorized Polk Audio Dealer.
To find a dealer near you, go to www.polkaudio.com; Discover
why, in the world of mobile audio, it doesn’t get any better than this.
Products Born of Passion.
Polk Audio is an award-winning designer and manufacturer
of high performance audio products and the largest audio brand
of Directed Electronics, Inc. (nasdaq, deix). Founded in 1972 by
three Johns Hopkins University graduates, Polk Audio holds over
50 patents for advances in audio design and technology. Polk’s
products include loudspeakers and electronic components for
home, auto and marine applications, the first satellite radio home
component tuner, the world’s first audiophile-grade active IPaddressable loudspeaker, the first THX® Ultra2 Certified in-ceiling
loudspeaker and I-Sonic®—the first Entertainment System to include
HDTM Radio, XM® Connect & Play capability and a DVD player. Polk
products are available through authorized specialist consumer
electronics retailers worldwide. For more information and
the location of a Polk retailer or distributor in your area,
visit www.polkaudio.com or call us at 1-800-377-7655
(USA and Canada). Outside of North America
call +1 (410) 358-3600.
WARNING
Listen Carefully!
Polk Audio loudspeakers and subwoofers are capable of playing at extremely
high volume levels, which could cause serious or permanent hearing damage.
Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property
damage resulting from the misuse of its products.
Keep these guidelines in mind and always use your own good judgment
when controlling volume:
You should limit prolonged exposure to volumes that exceed 85 decibels (dB).
High volume in an automobile can hinder your ability to Safely operate a vehicle.
You are responsible for knowing the local laws governing acceptable
mobile volume levels.
For more about safe volume levels:
Go to www.polkaudio.com/ education/article/SPL/. Or refer to the Occupational
Health and Safety Administration (OSHA) guidelines at www.osha.gov/
dts/osta/otm/noise/standards_more.html.
We’re fanatics when it comes to providing you useful, accurate information that
can help you evaluate our products. But as we all know, we live in an imperfect world.
At least some of us do. That’s why performance specifications and product dimensions
are subject to change without notice. For the most current specifications see our website,
www.polkaudio.com/caraudio.
Polk Audio is a Directed Electronics company which trades on NASDAQ under
the symbol DEIX. Investor information can be found at http://investor.directed.com.
Polk Audio, Polk, PowerPort, Dynamic Balance, F/X, Atrium, Big Speaker Sound Without
The Big Speaker, High Velocity Compression Drive, Acoustic Resonance Control, ARC
Port, Casket Basket, I-Sonic, SurroundBar & SDA are registered trademarks of Britannia
Investment Corporation used under license by Polk Audio, Incorporated. Polk Audio
Designs & miDock are trademarks of Britannia Investment Corporation used under
license by Polk Audio, Incorporated.
Polk Audio, Inc., 5601 Metro Drive, Baltimore, Maryland 21215
1-800-377-7655 (Worldwide: 1-410-358-3600)
Monday-Friday, 9:00am-6:00pm Eastern Time,
Fax: 410-764-4817, www.polkaudio.com
Copyright© July 2009. All rights reserved.
Polk Audio, Inc., 5601 Metro Drive, Baltimore, Maryland 21215
Customer Service 1-800-377-7655 (Outside US & Canada: 410358-3600) Monday-Friday, 9AM-6PM EST, polkcs@polkaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising