Interex | MHL331D | User's Manual | Interex MHL331D User's Manual

TECHNICAL DATA AND INFORMATION
153 hp
48,502 - 51,809 lbs
MHL331D
RECYCLING MACHINE
up to 39.4 ft
TECHNICAL DATA MHL331 D
OPERATING WEIGHT
48,502 - 51,809 lbs
DIESEL ENGINE
MANUFACTURER AND MODEL
Deutz TCD 2012 L06 2V
DESIGN
6-cylinder inline
ENGINE CONTROL
EMR III
TYPE
4-stroke diesel, direct common fuel injection, turbocharged with charge air cooling
ENGINE OUTPUT
153 hp
NOMINAL SPEED
2,000 rpm
DISPLACEMENT
366 in3
COOLING SYSTEM
Liquid intercooling with temperature-controlled fan speed
EMISSION STANDARDS
EPA Tier III and COM III
AIR FILTER DESIGN
Two-stage filter
FUEL TANK CAPACITY
79 US gal
ELECTRICAL SYSTEM
OPERATING VOLTAGE
24 V
BATTERIES
2 x 12 V / 100 Ah / 760 A (in accordance with EN)
LIGHTING SET
1 x H3 spotlights on upper carriage, 1 x H3 spotlights on cabin floor,
turn signal and rear side-marker lamps
GENERATOR
13 kW DC generator with control, driven by V-belt direct from diesel engine
TRAVEL DRIVE
Hydrostatic drive through infinitely variable axial piston motor and directly mounted travel
brake valves, two-speed power shift gear, 4-wheel drive
TRAVEL SPEED, 1ST GEAR
max. 3.1 mph
TRAVEL SPEED, 2ND GEAR
max. 12.4 mph
GRADEABILITY
max. 50%
TURNING RADIUS
23.0 ft
SWING SYSTEM
RING GEAR
Internally toothed ball ring gear (double row)
DRIVE
Two-stage planetary gear with integrated multi-disc brake
UPPER CARRIAGE SWING SPEED
Infinitely variable from 0 - 8 rpm
PIVOT BRAKE
Electrically operated
UNDERCARRIAGE
FRONT AXLE
Planetary drive axle with integrated drum brake, rigidly mounted, max. steering angle: 28°
REAR AXLE
Oscillating planetary drive rear axle with integrated drum brake and
selectable oscillating axle lock
STABILIZERS
4-point stabilizers
TIRES
Solid rubber, elastic tires 8-fold 9.00 - 20
BRAKE SYSTEM
02
SERVICE BRAKE
Hydraulic single-circuit braking system acting on all four wheel pairs
PARKING BRAKE
Electrically operated disc brake at transmission, acting on both front and rear axle
HYDRAULIC SYSTEM
REXROTH mobile hydraulic system with load limit control, and fuel conserving power
demand control. Separate oil cooler, temperature-controlled fan speed.
Hydraulic oil filter: integrated in the oil tank; maintenance interval: up to 3,000 operating hours.
Central lubrication system.
MAX. PUMP CAPACITY
100 US gal/min
MAX. OPERATING PRESSURE
4,641 / 5,221 psi
HYDRAULIC OIL TANK
90 US gal
OPERATOR’S CAB
Cab: elastically supported, infinitely variable hydraulically height-adjustable with max. eye level
of 17 ft. Large windows for excellent view, windshield with pull-down sunblind that slides under
cab roof, visibility panel in cab roof, sliding window in cab door, steering column height and tilt
adjustable.
HEATING
Infinitely variable hot water heating with 3-speed fan, 4 adjustable defroster nozzles
OPERATOR’S SEAT
Air-cushioned comfort-seat with integrated headrest, safety-belt and lumbar support, seat-heating
with integrated a/c function optional. Seat position, seat inclination and seat cushion multiadjustable in line with position of armrests and pilot control units, allowing low fatigue operation.
MONITORING
Ergonomic instrument layout, glare resistant. Function monitoring; automatic warning and
storage of deviating operating conditions, e.g. filter pressure with warning indicator and
shutdown of pilot controls, warning indicator or shutdown of pilot controls when exceeding
hydraulic oil temperature limits.
AIR CONDITIONING
Automatic
SOUND POWER LEVEL
(guaranteed) in accordance with guideline 2000/14 EC
LW(A) = 102 dB(A)
SAFETY INSTALLATIONS
For crane operations in accordance with EN 474-5.
Cab protection by close proximity range limiter.
OFFICIAL HOMOLOGATION
Certification according to CE-regulations.
03
EQUIPMENT MHL331 D
ENGINE
SERIES
CAB
SERIES
OPTION
Exhaust gas turbocharger
l
Lift-up skylight in cabin roof
l
Intercooling
l
l
Direct electronic fuel injection/
Common Rail
Air cushioned operator‘s seat with
headrest, safety belt and lumbar support
l
FOPS protective grating (roof)
l
Automatic idle
l
Front/roof protective grating
l
Interface for engine diagnosis
l
Hinged front windshield
Temperature-controlled fan drive
l
LEXAN front window glass
UNDERCARRIAGE
SERIES
2-speed power-shift transmission
l
4-point stabilizers
l
4-pt. stabiliziers, individually controllable
Outrigger cylinders with integrated
two-way check valves
OPTION
l
l
l
High strength glass, front and top
l
Cab elevation system, height adjustable
l
Air conditioning
l
Steering column, height and tilt adjustable
l
Multi-function color display
l
l
Fire extinguisher, dry powder
All-wheel drive
l
Radio / CD player
l
Piston rod protection on the outrigger
cylinders
Rotating beacon
l
l
Sliding window in cab door
l
Outrigger plates 19.7 x 13.8 in
l
Safety glass
l
Rear axle oscillating lock
l
Seat heating with integrated a/c function
l
l
Blade in addition to 4-pt. stabilizers
l
Windscreen washer system
Special paint
l
Dust protection system
l
Pressurized cabin system
l
Drum brakes
l
Tool box
l
All-wheel steering
UPPERCARRIAGE
l
SERIES
OPTION
EQUIPMENT
l
SERIES
Floodlights attached to cab floor
l
Floodlights, mounted to superstructure
l
Electrical refueling pump
l
Floodlight, stick mounted
Lighting protection
l
Close proximity range limiter for stick
l
l
l
Lockable cleaning access openings on
radiator
Coolant and hydraulic oil level
monitoring system
l
Hose rupture protection for lift cylinder
l
Separate radiator system for ambient
temperatures up to 122° F (50° C)
l
l
Hose rupture protection for stick cylinder
Stick shock protection
l
Lubrication of the grab suspension by
central lubrication system
l
Separate oil cooler with temperaturecontrolled fan drive
l
Automatic central lubrication system
l
l
Quick-drain valve for fuel tank
(delivered in tool box)
l
Quick-drain valve on hydraulic oil tank
l
Quick-drain valve on radiator
l
Quick-drain valve on engine oil-pan
l
Reversible fan for radiator and
hydraulic oil cooler
l
OPTION
l
Maintenance hood, actuated by gas strut,
with mechanical locking device
Special paint
04
OPTION
Overload protection/ shutdown
l
XENON floodlight on stick
l
XENON-floodlight on superstructure
l
XENON floodlight on cab roof
l
Filter system for attachments
l
DIMENSIONS
49.7
88.6
125.8
134.4
with protective grating for cab roof
MHL331 D
102.2
97.8
100.4
98.4
190.2
55.1
96.5
98.4
107.9
144.1
157.9
Dimensions (in)
MHL331 D
Transport dimensions
D
E
B
C
A
DIMENSIONS
REACH 35.1 ft
(MULTI-PURPOSE STICK)
REACH 36.1 ft
REACH 39.4 ft
A
393.7 in
391.7 in
389.8 in
B
202.4 in
206.7 in
168.5 in
C
51.2 in
51.2 in
51.2 in
D
125.8 in / *134.4 in
125.8 in / *134.4 in
125.8 in / *134.4 in
E
106.3 in
104.3 in
122.0 in
* with protective grating for cab roof
05
WORKING RANGES/LIFTING CAPACITIES MHL331 D
40
Reach 36.1 ft
with stick
Work equipment:
Box-type boom 21.3 ft;
Stick 14.4 ft;
Cactus grab
30
20
10
0
Center of rotation
-10
40
30
20
10
0
3Reach in ft
06
HEIGHT
UNDERCARRIAGE
ft
STABILIZERS
35
30
25
20
15
10
5
0
-5
REACH ft
15
20
non supported
(11,460)
4-pt. supported
12,390* (12,390*)
25
30
non supported
(11,720)
(8,140)
4-pt. supported
14,050* (14,050*)
12,380* (12,380*)
non supported
(11,660)
(8,160)
(6,000)
4-pt. supported
14,120* (14,120*)
12,720 (12,840*)
9,430 (10,910*)
non supported
(11,330)
(7,980)
(5,950)
4-pt. supported
15,060* (15,060*)
12,530 (13,290*)
9,370 (11,570)
35
non supported
(16,710)
(10,750)
(7,670)
(5,790)
(4,500)
4-pt. supported
21,180* (21,180*)
16,770* (16,770*)
12,180 (14,170*)
9,200 (11,390)
7,240 (8,960)
non supported
(15,110)
(10,020)
(7,280)
(5,580)
(4,410)
4-pt. supported
25,750* (25,750*)
16,490 (18,860*)
11,760 (14,710)
8.980 (11,150)
7,140 (8,850)
non supported
(13,740)
(9,340)
(6,910)
(5,370)
(4,320)
4-pt. supported
22,310* (22,310*)
15,720 (20,170)
11,350 (14,280)
8,750 (10,920)
7,040 (8,750)
non supported
(13,170)
(8,960)
(6,690)
(5,240)
(4,260)
4-pt. supported
15,440* (15,440*)
6,970 (8,670)
15,210 (19,620)
11,050 (13,960)
8,590 (10,740)
non supported
(8,710)
(6,500)
(5,150)
4-pt. supported
14,990 (19,380)
10,900 (13,800)
8,510 (10,660)
RECOMMENDED ATTACHMENTS
LIFT HOOK
22,046 lbs
TEREX FUCHS
CACTUS GRAB 0.52 yd3
Open or half-closed tines
TEREX® FUCHS
CACTUS GRAB 0.78 yd3
Open or half-closed tines
GRAB FOR LIGHTWEIGHT
MATERIALS 1.0 yd3
Loose goods density up to
2,360 lb/yd3
MAGNET SYSTEM
Terex® Fuchs magnetic plate
®
Capacity values are stated in (lbs). The pump pressure
is 5,221 psi. The values, in accordance with ISO 10567,
amount to 75% of the static tipping load or 87 % of the
hydraulic lifting force (marked *). They apply to slewing
operations through 360° on a firm and level surface.
Values in brackets apply to the longitudinal direction of
the undercarriage. “Non-supported” values only apply
when the load is hoisted above the front or rear axle.
The weight of the attached hoisting equipment (grab,
coupler, magnet, lift hook, etc.) must be deducted from
the capacity values. In accordance with CE guidelines,
hose-rupture protection valves on the lift cylinders
and an overload warning device are required for crane
operations.
07
WORKING RANGES/LIFTING CAPACITIES MHL331 D
Reach 39.4 ft
with stick
40
Work equipment:
Box-type boom 21.3 ft;
Stick 17.9 ft;
Cactus grab
30
20
10
0
Center of rotation
-10
-20
40
30
20
10
0
3Reach in ft
08
HEIGHT
UNDERCARRIAGE
ft
STABILIZERS
35
30
25
20
15
10
5
0
-5
-10
REACH ft
15
20
25
non supported
(8,330)
4-pt. supported
9,590* (9,590*)
30
35
non supported
(8,500)
(6,200)
4-pt. supported
11,320* (11,320*)
8,960* (8,960*)
non supported
(8,470)
(6,230)
(4,690)
4-pt. supported
11,330* (11,330*)
9,690 (10,720*)
6,930* (6,930*)
non supported
(8,270)
(6,120)
(4,680)
4-pt. supported
11,850* (11,850*)
9,580 (10,960*)
7,440 (9,090)
non supported
(11,260)
(7,930)
(5,930)
(4,580)
4-pt. supported
14,660* (14,660*)
12,500 (12,820*)
9,370 (11,470*)
7,340 (8,990)
40
non supported
(16,190)
(10,470)
(7,500)
(5,680)
(4,440)
(3,500)
4-pt. supported
22,080* (22,080*)
16,950* (16,950*)
12,010 (14,040*)
9,100 (11,190)
7,190 (8,830)
5,780 (6,880*)
non supported
(14,450)
(9,650)
(7,050)
(5,410)
(4,300)
(3,500)
4-pt. supported
25,570 (26,780*)
16,090 (19,210*)
15,510 (14,330)
8,810 (10,890)
7,030 (8,670)
5,780 (6,880*)
non supported
(13,460)
(9,110)
(6,730)
(5,230)
(4,190)
4-pt. supported
20,400* (20,400*)
15,350 (19,580)
11,090 (13,890)
8,570 (10,630)
6,900 (8,530)
non supported
(12,790)
(8,630)
(6,420)
(5,040)
(4,100)
4-pt. supported
16,480* (16,480*)
14,920 (19,120)
10,820 (13,600)
8,410 (10,460)
6,820 (8,450)
non supported
(6,320)
4-pt. supported
10,710 (13,490)
RECOMMENDED ATTACHMENTS
LIFT HOOK
22,046 lbs
TEREX FUCHS
CACTUS GRAB 0.52 yd3
Open or half-closed tines
GRAB FOR LIGHTWEIGHT
MATERIALS 0.78 yd3
Loose goods density up to
2,360 lb/yd3
MAGNET SYSTEM
Terex® Fuchs magnetic plate
®
Capacity values are stated in (lbs). The pump pressure
is 5,221 psi. The values, in accordance with ISO 10567,
amount to 75% of the static tipping load or 87 % of the
hydraulic lifting force (marked *). They apply to slewing
operations through 360° on a firm and level surface.
Values in brackets apply to the longitudinal direction of
the undercarriage. “Non-supported” values only apply
when the load is hoisted above the front or rear axle.
The weight of the attached hoisting equipment (grab,
coupler, magnet, lift hook, etc.) must be deducted from
the capacity values. In accordance with CE guidelines,
hose-rupture protection valves on the lift cylinders
and an overload warning device are required for crane
operations.
09
WORKING RANGES/LIFTING CAPACITIES MHL331 D
Reach 35.1 ft
with multi-purpose
stick
40
Work equipment:
Box-type boom 21.3 ft;
Stick 13.1 ft;
Sorting grab
30
20
10
0
Center of rotation
-10
40
30
20
10
0
3Reach in ft
10
HEIGHT
UNDERCARRIAGE
ft
STABILIZERS
30
25
20
15
10
5
0
-5
REACH ft
15
20
25
non supported
(11,070)
(7,500)
30
4-pt. supported
14,210* (14,210*)
11,120* (11,120*)
non supported
(11,010)
(7,550)
(5,390)
4-pt. supported
14,220* (14,220*)
12,100 (12,720*)
8,820 (8,860*)
non supported
(17,060)
(10,650)
(7,370)
(5,360)
4-pt. supported
18,330* (18,330*)
15,140* (15,140*)
11,910 (13,120*)
8,790 (10,880)
non supported
(15,780)
(10,040)
(7,050)
(5,210)
4-pt. supported
21,810* (21,810*)
16,590 (16,780*)
11,560 (13,920*)
8,620 (10,710)
35
non supported
(14,120)
(9,300)
(6,670)
(5,010)
(3,380)
4-pt. supported
25,240 (26,150*)
15,740 (18,720*)
11,130 (13,950)
8,410 (10,480)
6,610 (8,240)
non supported
(12,850)
(8,650)
(6,310)
(4,820)
(3,800)
4-pt. supported
16,910* (16,910*)
15,000 (19,230)
10,740 (13,530)
8,200 (10,260)
6,520 (8,150)
non supported
(12,410)
(8,310)
(6,100)
(4,700)
4-pt. supported
13,930* (13,930*)
14,550 (18,750)
10,460 (13,240)
8,050 (10,110)
non supported
(5,960)
4-pt. supported
10,350 (13,120)
Capacity values are stated in (lbs). The pump pressure is 5,221 psi. The values, in
accordance with ISO 10567, amount to 75% of the static tipping load or 87% of the
hydraulic lifting force (marked *). They apply to slewing operations through 360° on
a firm and level surface. Values in brackets apply to the longitudinal direction of the
undercarriage. “Non-supported” values only apply when the load is hoisted above
the front or rear axle. The weight of the attached hoisting equipment (grab, coupler,
magnet, lift hook, etc.) must be deducted from the capacity values. In accordance with
CE guidelines, hose-rupture protection valves on the lift cylinders and an overload
warning device are required for crane operations.
11
Terex Construction Americas
8800 Rostin Road
Southaven, MS 38671 - USA
Tel.: (662) 393-1800 Fax: (662) 393-1700
Web: www.terex.com
PURPOSE
BUILT
SIMPLE TO OPERATE.
VERSATILE IN USE.
MHL331 D. An efficient all-around perfomer.
With its versatility and quick maneuvering speed, the MHL331 D really
gets the recycling business moving. The robust undercarriage provides
a stable base when loads need to be moved with maxium reach of
up to 39.4 ft. In such situations it is essential that neither speed nor
precision is compromised; the slewing motor and gear are designed
with productivity in mind and the lift and stick cylinders are fitted with
special end-cushioning for enhanced performance.
The MHL331 D incorporates efficient cooling technology. The
separate cooling systems, consisting of a hydrostatically driven fan
for the oil cooler and an engine-driven fan for liquid intercooling,
combine excellent cooling power with quiet performance, enabling the
machine to be used at ambient temperatures of up to 122° F (50°C).
Optional features are available for use indoors or in harsh operating
environments, including particulate filters and a pressurized cabin
system if required.
The clean and quiet 153 hp turbo diesel
engine meets Tier III emissions standards;
noise and emissions are minimal. The
operator has excellent visibility and control,
aided by the height-adjustable cab with
large windows and a modern multi-function
color monitor which makes comprehensive
operating information available at a glance.
Ergonomically arranged controls, airconditioning, and a comfortable easily
adjustable seat are among the standard
in-cab features.
Effective date: April 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in
this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure
to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only
warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty,
express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the
USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright
© 2009 Terex Corporation.
MHL331D-N.A. .5K 0409 Part Number 127608
Download PDF