JAMO MPA-201 Operating instructions


Add to my manuals
16 Pages

advertisement

JAMO MPA-201 Operating instructions | Manualzz

MPA-201

WARNING:

Improper installation could result in damage to the amplifi er and/or speakers.

Read all instructions before installation.

Englis

The light ning flash w it h arrow head symbol w it hin an equilat eral t riangle, is int ended t o alert t he user t o t he presence of uninsulat ed dangerous volt age w it hin t he product ' s enclosure t hat may be of sufficient magnit ude t o const it ut e a risk of elect ric shock t o persons.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT REM OVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

The exc lamat ion point w it hin an equilat eral t riangle is int ended t o alert t he user t o t he presenc e of import ant operat ing and maint enanc e (servic ing) inst ruc t ions in t he lit erat ure ac -c ompanying t he produc t .

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

12. Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart / apparatus combination to avoid injury from tip-over.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments / accessories specifi ed by the manufacturer.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. WARNING: To reduce the risk of electric shock, this apparatus should not be exposed to rain or moisture and objects “ lled with iquids, such as vases, should not be placed on this apparatus.

16. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

Contents:

Introduction

Features:

Jamo MPA-201 front panel

Jamo MPA-201 rear panel

Connection

Connecting examples

P assive subwoofer Page 9

Fullrange stereo Page 10

2 x 200W bridged Page 11

Daisy chain Page 12

Specifi cations

Warranty

Page 4

Page 4

Page 5

Page 6

Page 8

Page 9

Page 13

Page 14

4

Introduction

Congratulations on your purchase of your new Jamo Multi-P urpose Amplifi er (MPA-201). It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best quality craftsmanship and reliable performance.

The MP A-201 is specifi cally designed for home theatre applications. Because of its ample power and tw o-channel capacit y (stereo), it can fi t into virtually any surround application. Narrow width chassis is designed for conv enient shelf or syst em rack mounting in the space of the one stereo component.

It allows you to use one amplifier as lef t and right stereo front speakers, sec ond amplifier use as left and right rear (surr ound) speak ers and thir d amplifi er use for centre channel.

Bridge mode capability allows the use of the two channels connected together to form one high pow er amplifi er channel, pro viding 200 watts int o 8 Ohm.

The MPA-201 is also a subwoof er amplifi er with adjustable elec tronic crossover. With switch in

OFF position it becomes full r ange amplifi er .

The power rating for the Jamo MPA-201 pow er amplifi er are obtained using fi xed v alue test load impedances and high intensity sine wave t est tones . However, the ac tual impedanc e of the loudspeaker will vary with frequency, deviating somewhat from the loudspeaker manufacturer's nominal impedance rating.

T his Jamo amplifi er has been specially designed t o drive any modern loudspeaker system with a rat ed impedance of 4 Ohms or higher .

Features

1. Power output, rated at 2x100 Watts (stereo) into 4 Ohm

2. High power output (bridged mode), rated at 200 Watts into 8 Ohm

3. Subwoofer amplifi er, adjustable crossover frequenc y 50 Hz --150 Hz

4. Full r ange amplifi er

5. Extensiv e heat sinks f or reliable operation and long lif e of the amplifi er

6. High current discrete power transistors in the output stage f or the best possible performance

7. Automatic power turn "ON"

8. Level control

9. Gold plated RCA input and output jacks

10. Heavy duty push button binding posts

11. Overload protection

Jamo MPA-201 front panel

1

Power LED

Flashing blue - Standby mode

Blue - Amplifi er On

Flashing red - Thermal protection

Red - Overload protection

2

Level adjustment

5

Jamo MPA-201 rear panel

120 volt version

T5AL/250V

6

1

2 Socket for mains cable

5

3 Fuse/Fuse Jack

4

Speaker

Low pass adjustment:

6 between 50 - 150 Hz. Only adjustable when low pass is selec ted 5

Low pass:

4

Flat: Fullrange

7

8

9

10

Stereo/mono: Stereo mode - 2 x 100 watt stereo output (4 )

Mono mode - 200 watt mono

On - AmpliÞ er ON

AUTO - auto turn on mode

Line in: Line level input from source

Line out: Line level output

Jamo MPA-201 rear panel

220-240 volt version

T2.5AL/250V

1

2 Socket for mains cable

5

3 Fuse/Fuse Jack

4

Speaker

Low pass adjustment:

6 between 50 - 150 Hz. Only adjustable when low pass is selec ted 5

Low pass:

4

Flat: Fullrange

7

8

9

10

Stereo/mono: Stereo mode - 2 x 100 watt stereo output (4 )

Mono mode - 200 watt mono

On - AmpliÞ er ON

AUTO - auto turn on mode

Line in: Line level input from source

Line out: Line level output

7

Connection

The Jamo MPA-201 is equipped with gold-plated push button binding posts which will accept very heavy stripped wire. Ask your local Jamo dealer for advice on the choice of cable.

Connect the loudspeakers to your Jamo MPA-201 as follows:

1. Turn of the MPA-201

2. Carefully remove approx. 3/8" /10 mm of the insulating material

- beware not to damage the conductors!

3. Twist the conductor ends

4. Push the binding posts so the conductors can easily fit into the holes

8

Note: Make sure that the stripped + and - wires do not touch each other, as a short-circuit could damage the

Jamo MPA-201's output section.

Always make sure that:

Your loudspeakers are in correct phase;

The loudspeaker 's + terminal is connected to the Jamo MPA-201's + terminal.

T he loudspeaker's - t erminal is connected to the Jamo MPA-201's - terminal.

Usually , the loudspeaker cable is marked on one wir e which is normally used to connect the + terminals to ensure correct phase.

Connecting examples

Passive subwoofer

When Low pass is selec ted, you can adjust the low pass frequency between 50 - 150

Hz. This makes it possible to make the subwoofer match your front speakers.

9

10

Fullrange stereo

Connecting examples

2 x 200W bridged

11

Daisy chain

12

When using this feature you can connect all the MPA-201 in parallel you need.

Specifi cations

Rated Power Output

Total Harmonic Distortion (THD)

100 Watts (Stereo) into 4 ohm Load

200 Watts (BTL) into 8 ohm Load

<0.1%

Signal-to-Noise R atio >100dB

Crossover Freq. Responce (-3dB): @ Min position 18.5-55.2Hz 40Hz/0dB ref

@ Max position 18.2-168.8Hz 40Hz/0dB ref

Auto Turn On Sensitivity 5mV+/2mV Full Range 1KHz

5mV+/2mV Sub Input 50 Hz

Delay „OFF“ Time

Line Out Freq. Response (-3dB)

Input Impedance Line In

Max. noise+hum Vol Max

Weight

Shipping Weight

Dimensions (including feet):

Width

Heigh t

Depth

Clearance for ventilation

Top

Back

20 minutes

20Hz +/-5K - 20 KHz +/-5K 1KHz/0dB ref

9.2K ohm,+/-5%

<1.0mV, Input Shorted

11 Ibs 11 oz (5.3 kg)

11 Ibs 12 oz (5.6 kg)

/

3

/

2

/

/ ”

Minimum 2" (50mm)

13

� �

� � � �� � � � � �� � �� � � �� � � � � � � �

� � � �� � � �� � � � �� � � �� � �� ����� � � � ��� �� ��� �� � �� � ���� � �� � � �� � �� � � � � �� � �� �� � � � � � �� � �� � � ��� � � �� � ��

� � � �� � � � � � � � �� ����� � � �� ��� � �� � � ��� ��� � �� � �� � � �� � �� ��� �� � ��

� �� � � � � ��� � �� �� � � � � � �� � ��� � � � � �� � � � �� � amplifi �� ���� � � ��

� �� � � � � ��� � �� � � � � �� � � � � ��� � � �� � � ��� � � � � � � �� � �� � ��� � � ���

�� �� � � � �� ��� � � � � � � � ��� � � �� �� � ��� �� � � � �� � � � � � � �� � � � �� � � �� ��

�� �� � � � �� ��� � � � � � � ��� � �� � � � �� � �� � � � � �� � � � � � � � ��� �� � � � �� � � �� � � �� � � � �� � �� �� � ��� � � � �� � �

� � �� � � � �� � � � � � � �� � �� � � �� � � � � � � � �

� � � � � � ��� � �� � � �� � �� � � � �� � � � � � �� � �� � ��� � � �� � � �� � � � �� � � � � � �� � � �� �� � � � � �� � �� � � �� � � � � �� ��

� � �� � � � �� ��� � � �� � � � � � � ��

� � �� � � � �� � � �� � � � � � � �� � �� � � �� � � � � � � � �

� � �� � �� �� ��� �� � ���� � �� � � �� � � �� ��� �� � � � ��� � �� � ��� � � ��� � � ��� � ���� �� �� � �� �� � � � � � ��� � ��� � ��

� � ��� � �� � ��� � � ��� � � �� � ��� � �� � � �� ����� � � � �� � ��� � � �� � � � ���� �� � �� � �� � �� �� � � � � �

� � �� � � � �� ��� �� � ���� � ��� � � ��� � � ��� � � � ��� � �� � �� ��� � � �� � �� �

� � �� � � � �� ��� �� � ��� om modifi � � � �� � � � � � � ��� � � �� � � � �� ���� � � ���� � �� �� � � �� � � � � ��� � � �� � �� �� � �

� � � � � �

� � �� � � � �� � �� �� � ��� � � �� � � �� � � �� ��� � � �� � �� �� � ��� � � � � �� � � � �

� � �� � � � �� � �� � � � � � � � �� �� � �� �� � � � � �� � ��� � � �� � �� � � �� � �� � � � � �

� � � � � �� � �� � � � �� � � �� � �� � � � �� �� � � �� � �� ��� � � � � � � � � � �� � � � � � �� � � �� � � � ��� � co � � � � l

� � � � � � � � � � � �� � �� � � � � ��� � �� � � � �� �� � �� �� �� � � �� � � � � � � �� � �� � � �� � � �� � � � ��

� � � �� � � � ��� � ��� ���� � �� �� � �� �� � �� � � � �� �� � �� � � �� � � �� � �� � � �� � �� � � � � �� � �� � � � � � � � ��

� �� � � �� � � � � � � �� � � � � � �� � � � � � �� � � �� � �� � �� ��� � � �� �� � � � � �� � � � � �� � � �� � � � ��

MPA-201 / 02.2006

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement