JVC | EM40NF5 | Quick Start Guide | JVC EM40NF5 Quick Start Guide

Emerald Series
QUICK START GUIDE
*All Images shown in QSG are only for illustration purpose.
Emerald Series QUICK START GUIDE
Rev. 09/14
IMPORTANT SAFETY INFORMATION
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated dangerous voltage with the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
•
•
•
•
•
•
•
•
•
•
•
•
•
Read and follow all these instructions.
Heed all warnings.
•
Do not use this device near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or •
other heat-generation devices.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
•
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
•
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the device.
Only use attachments/accessories specified by the manufacturer.
•
Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
•
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the •
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the •
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Apparatus should not be exposed to dripping or splashing, and objects filled with
Emerald Series QUICK START GUIDE
liquids, such as vases, should not be placed on the apparatus.
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits, as contact
with them might be fatal.
Do not overload wall outlets and extension cords, as this can result in a risk or fire
or electric shock.
Do not push objects through any openings in this unit as they may touch
dangerous voltage points or short out parts that could result in fire or electric
shock. Never spill or spray any type of liquid into the unit.
If an outside antenna or cable system is connected to the unit, be sure he
antenna or cable system is grounded to provide some protection against voltage
surges and built-up static charges, Section 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with respect to proper grounding practices
When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or those that have the same
characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Upon completion of any service or repairs to this unit, ask the service technician
to perform safety checks to determine that the unit is in proper operating
condition.
When you connect the product to other equipment, turn off the power and
unplug all of the equipment from the wall outlet.
Sudden high volume sound may cause hearing or speaker damage. When you
use headphones (if the unit is equipped with a headphone jack), keep the volume
at a moderate level.
Rev. 09/14
CHECK MATERIALS IN PACKAGE
DOWNLOAD FULL VERSION USER MANUAL
http://jvc-tv.com
Emerald Series QUICK START GUIDE
Rev. 09/14
REMOTE CONTROL
IR Transmitter
SLEEP button
Select a sleep mode timer
Playback Controls
Control USB multimedia and HDMI-CEC devices
INPUT button
Select Input source
WIDE button
Select viewing aspect
MUTE button
VOLUME Controls
LED indicator
TV POWER button
MEDIA button
Access USB Multimedia
MENU button
INFO button
Direction buttons
OK button
RETURN button
AUDIO button
Enter Audio Only Mode
CHANNEL Controls
Number Pad
To directly key in channels. Use “-” for subchannel. Example: 2-1 or 18-7
ENTER button
Quick Input Select button
(PC button is not applicable for EM series TVs)
Emerald Series QUICK START GUIDE
Rev. 09/14
FRONT VIEW
Power Indicator & Remote Sensor
Emerald Series QUICK START GUIDE
Rev. 09/14
REAR VIEW
USB
HDMI / MHL
Digital Optical Out
Audio Out
Power / Multi-Function Button
AC Power
HDMI-1
Component /
Video Input
Audio Input/ Antenna
Music Port
Input
Power / Multi-Function Button Operation:
•Press the button to show Quick Control Menu and switch between options
•Press and hold the button to select highlighted option
•To power off TV, press and hold the button while Quick Control Menu is not on screen
Emerald Series QUICK START GUIDE
Rev. 09/14
INSTALLING BASE AND BATTERIES
1. Carefully place TV face down on a flat and clean surface. It is recommended to place the TV
cover or protection sheet between the TV and the flat surface
2. Attach base to TV unit and fasten with screws provided
Emerald Series QUICK START GUIDE
Rev. 09/14
INSTALLING BASE AND BATTERIES
Be sure to follow correct polarity.
Do NOT combine a used battery with a new one
Do NOT combine rechargeable battery with a nonrechargeable battery (e.g. Alkaline or Carbon-zinc)
Emerald Series QUICK START GUIDE
Rev. 09/14
CONNECTING TV AND DEVICES
Connect to Power
Antenna Cable is not included
Audio cable is not included
Emerald Series QUICK START GUIDE
Rev. 09/14
CONNECTING TV AND DEVICES
HDMI, AV Cables are not
included
Optical cable is not included
Emerald Series QUICK START GUIDE
Rev. 09/14
CONNECTING TV AND DEVICES
USB drive is not included
Emerald Series QUICK START GUIDE
Rev. 09/14
FIRST TIME SETUP
The Setup Wizard appears when you turn on the TV for the
first time.
Follow the TV on-screen instruction and use the remote to
choose:
•Menu language
•TV mode
•Time Zone
•Channel Scan
(Make sure TV remote batteries are installed before operating)
You can also run the Setup Wizard at any time, by choosing
MENU > SETUP > SETUP WIZARD
Emerald Series QUICK START GUIDE
Rev. 09/14
TROUBLESHOOTING
Problem
No Power
Poor or No Sound









Poor or No Picture



Poor Reception on


Some Channels


The Remote Control 

does not work



TV Shuts Off

No CATV Reception 

Closed Caption is not 
activated

Solution
Make sure the power cord is plugged in.
The power is off; press Power button to turn on the TV.
Try another outlet.
Unplug the unit for an hour, and then plug it back in.
Press the VOL Up button on the remote control or adjust volume using the Power/Multi-Function
button on TV (see page 6 for details).
Press MUTE button on the remote control to ensure mute is not on.
The channel or cable TV broadcast is experiencing problems. Tune to another channel.
Check the TV audio settings and possible sources of interference.
The channel or cable TV is experiencing problems. Tune to another channel.
Make sure that channels are set into memory.
Check the antenna or cable TV connections.
Check for possible sources of interference.
The channel or cable TV broadcast is experiencing problems. Tune to another channel.
Make sure that channels are set into memory.
The network signal is weak. Adjust the antenna to receive a better reception
Check for possible sources of interference.
Batteries may be weak, dead, or inserted incorrectly.
Point the remote control directly at the IR sensor on the TV with an angle of 35 degrees.
Remove any obstacles between the remote control and the TV.
Remote control is out of range. Move closer to the TV.
Sleep timer is set.
Power is interrupted.
Check all cable TV connections.
Set the TV Mode in Channel menu.
The channel/program is not a closed caption broadcast. Try another channel.
Enable Closed Caption in the Menu.
Emerald Series QUICK START GUIDE
Rev. 09/14
LIMITED WARRANTY
On Parts and Labor
This Limited Warranty covers units that are purchased as new and in the United
States Only. This Product is manufactured, distributed, and warranted by AmTRAN
Video Corporation (hereinafter known as “Warrantor”) under brand license by JVC
KENWOOD Corporation. The Warrantor provides a warranty to the original
purchaser of a new Product against defects in materials and workmanship for a
period of one (1) year of non-commercial usage and ninety (90) days of commercial
use. If a Product covered by this warranty is determined to be defective within the
warranty period, the Warrantor will either repair or replace the Product at its sole
option and discretion.
To obtain warranty service, contact Technical Support:
Visit the Web Site: http://jvc-tv.com/support
Or call our Customer Support and Service Center 1-855-868-1928
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A
DESIGNATED SERVICE CENTER.
Proof of purchase in the form of a purchase receipt or copy thereof is required to
show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at the Warrantor’s
option and sole discretion. Replacement parts and Products are warranted for the
remaining portion of the original warranty or for ninety (90) days from warranty
service or replacement, whichever is longer.
Types of Service
Defective Products must be sent to the designated service center to obtain
warranty service. The Warrantor is not responsible for the transportation costs to
the service center, but will cover the costs for return shipping to the customer.
PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A
DESIGNATED SERVICE CENTER FOR WARRANTY SERVICE.
Product returned to designated service centers must either utilize the original
carton box and shipping material or packaging that affords an equal degree of
protection. Technical Support will provide instructions for packing and shipping the
Product to the designated service center.
Emerald Series QUICK START GUIDE
Limitations and Exclusions
The Warrantor’s one-year limited warranty only covers defects in materials and
workmanship. This warranty does not cover product issues caused by any other
reason including, but not limited to, cosmetic damage, normal wear and tear,
improper operation, improper voltage supply or power surges, signal issues,
damages from shipping, acts of God, any type of customer misuse, modifications or
adjustments, as well as installation and setup issues or any repairs attempted by
anyone other than by a authorized service center. Products with unreadable or
removed serial numbers, or requiring routine maintenance are not covered. This
one-year limited warranty does not cover Products that are sold “As-Is”, “Open
Box”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. THE WARRANTOR’S
TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY
CAUSE WHATSOEVER INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. THE
WARRANTOR SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF
INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS,
OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH
VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT
NOTICE. CHECK TV.JVC.COM FOR THE MOST CURRENT VERSION.
PERSONAL DATA
If your Product is capable of storing personal data and other information, all
contents and information will be deleted in the course of some in-home, and all
ship-in, warranty service. If this occurs, your Product will be restored to you
configured as originally purchased. You will be responsible for restoring all
applicable data and passwords. Recovery and reinstallation of User data is not
covered under this Limited Warranty.
Rev. 09/14
LIMITED WARRANTY
In order to protect your personal information, we recommend that you always clear all
personal information from the Product before it is serviced, regardless of the servicer.
Important Open Source Software Notice
Some JVC device may contain free software which is based on the license granted under
the GNU General Public License and Lesser General Public License (hereinafter
“GPL/LGPL”) that are subject to the GPL2.0/LGPL2.1 You may use, modify, or distribute
only if you agree to all of the terms and conditions of the GPL/LGPL. For more details on
the list of JVC devices with open source software, please visit http://jvc-tv.com/support.
Please note that any software component developed or created independently by
AmTRAN Video Corporation shall not be subject to “GPL/LGPL” requirement for
provision of the source code. Users are urged to read the details for the relevant license
carefully before using the software component covered by “GPL/LGPL.”
You can obtain a copy of the GPL/LGPL license from http://www.gnu.org/licenses/gpl
and http://www.gnu.org/licenses/lgpl. Please note that we are unable to answer any
inquiry relating to the contents, etc of the source code.
Permission is hereby granted, free of charge, to any person obtaining a copy of any such
software and associated documentation files (the “Open Source Software”), to deal in
the Open Source Software without restriction including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Open
Source Software, and to permit persons to whom the Open Source Software is
furnished to do so, subject to the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT, IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Third Party Application Notice
You may encounter third-party applications (including links to websites, widgets,
software or other software utilities (“Applications”) that interact with the Product.
Such Applications are owned and operated by third parties that are not related to
or sponsored by us. Use of an Application through the Product is at your own
option and risk. We do not endorse any included third-party Applications or thirdparty products or services. Your use of included Applications is subject to the terms
of use and privacy policy of the Application provider.
Emerald Series QUICK START GUIDE
REGULATORY STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to
operate this equipment.
Responsible Party: AmTRAN Video Corporation
Address: 9 Goddard, Irvine, CA 92618, USA
Telephone No; 949-336 6633
Required Marking Location
The rating sheet and the safety caution are on the rear of the unit.
Rev. 09/14
TV SERIAL NUMBER
Copy TV serial number here for quick future reference
Serial and Model numbers can be
found on the safety label located on
the back of the TV.
EXAMPLE
Emerald Series QUICK START GUIDE
Rev. 09/14
We Are Here To Help!
Call our highly trained support team at
1 - 855 - 868 - 1928
We can help you with
•Damaged Package
•Missing Parts
•Technical Support
Or visit
http://jvc-tv.com
192513016110
Emerald Series QUICK START GUIDE
Rev. 09/14
Download PDF