SSAC FS500 Series Relay Output Solid State Flashers
Flasher - Relay Output
FS500 Series
Solid State Flasher
Description
Operation
The FS500 Series flash rate is adjustable from 10 to
100 flashes per minute. A locknut is provided to hold
selected flash rate. The long-life electronic circuit
combined with a quality electromechanical relay
provides flexibility and reliability in most applications.
Upon application of input voltage, the output relay is
energized and the ON time begins. At the end of the
ON time, the output relay de-energizes and the OFF
time begins. At the end of the OFF time, the output is
energized and the cycle repeats as long as input
voltage is applied.
Reset: Removing input voltage resets the output
and the sequence.
Connection
Function
Flasher (ON First)
Solid State Circuitry--Relay
Output
Industrial Standard Octal
Plug-in
Adjustable Flash Rate
10 ... 100 FPM
10 A DPDT Output Contacts
V = Voltage
R = Reset
T1 = ON Time T2 = OFF Time
NO = Normally Open NC = Normally Closed
Dashed lines are internal connections.
Mechanical View
Approvals:
(some models)
Inches (Millimeters)
Accessories
Ordering Table
Panel mount kit
P/N: BZ1
Octal
8-pin socket
P/N: NDS-8
Hold down clips
P/N: PSC8
FS501B01
DIN rail P/Ns:
017322005 (Steel)
C103PM (Al)
07.01.04
See accessory pages for
specifications.
Input
12 V DC
24 V AC/DC
120 V AC/DC
230 V AC
CSA
Technical Data
Specifications
Mode of Operation
Flash Rate
ON/OFF Ratio
Input
Input Voltage
Tolerance
12 V DC & 24 V DC/AC
120 ... 230 V AC/DC
Frequency
Output
Type
Rating
Mechanical
Mounting
Termination
Protection
Isolation Voltage
Polarity
Environmental
Operating/Storage Temperature
Weight
Part Number
FS512
FS524
FS590
FS599
*
*
*
ON/OFF recycling flasher with adjustable flash rate
Adjustable from 10 ... 100 operations per minute
(guaranteed range)
≅ 50%
12 V DC, 24 V AC/DC, 120 V AC/DC, 230 V AC
-15% ... +20%
-20% ... +10%
50 ... 60 Hz
Electromechanical relay DPDT
10 A resistive at 120/240 V AC & 28 V DC;
1/3 hp at 120/ 240 V AC
Plug-in socket
8 pin Octal plug
> 1500 V RMS input to output
DC units are reverse polarity protected
-20°... +60°C / -30° ... +85°C
≅ 5.8 oz (164 g)
Low Voltage Products & Systems
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
6.9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement