JVC HR-S3600U Instruction manual
Add to my manuals2 Pages
JVC HR-S3600U: Record your favorite TV shows, movies, and more with this reliable VCR. With its user-friendly controls and versatile features, it's perfect for any home entertainment setup. You can easily pause and rewind live TV, set a timer to record your favorite shows, and even make a copy of your home videos. The VCR also features a variety of playback options, so you can watch your recordings whenever you want.
advertisement
4
WATCH A RECORDED PROGRAM
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press REW or FF to find program start point.
3 Press PLAY to start playback.
4 Press STOP (remote) or STOP/EJECT (VCR), then press STOP/EJECT to remove the cassette.
5
RECORD A PROGRAM
a–BASIC RECORDING
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette as above.
2 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote), to select the recording channel.
3 Press SP/EP (remote) to set the recording speed.
4 Press REC and PLAY together (remote) or REC (VCR) to start recording.
5 Press PAUSE to stop recording temporarily, and press PLAY to resume.
6 Press STOP or STOP/EJECT, then press STOP/EJECT to remove the cassette.
b–INSTANT TIMER RECORDING
* You cannot perform ITR using the remote control.
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears in the VCR display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
SP
VCR
HR-S4600U
POWER
POWER
MENU OK
S-VIDEO VIDEO (MONO)L—AUDIO—R
CH
S-VHS ET
REC LINK
PAUSE
PLAY
REW
PLAY
FF
JOG
SHATTLE
SP EP
VCR
PAUSE
REC
INSERT A.DUB
HR-S3600U
POWER
POWER
MENU OK
VIDEO (MONO)L—AUDIO—R
CH
S-VHS ET
REC LINK
CH
䊱䊲
SP EP
VCR
REC STOP/EJECT
PAUSE
PLAY
REW
PLAY
FF
JOG
SHATTLE
PAUSE
REC
SP/EP
TV/VCR
CH
䊱䊲
REC STOP/EJECT
ENTER
TV/VCR
PLAY
REW (Rewind)
REC
STOP
TV
CABLE/
DBS
MBR SET
A/B
POWER
TV/VCR ENTER/OSD DISPLAY
1
4
7
C. RESET
CANCEL
2
5
DAILY(M-F)
8
AUX
0
3
6
WEEKLY
9
2
TIMER 4
START STOP DATE CH
1 PROG
REW
EXPRESS PROGRAMMING
PROG
CHECK
SP/EP SKIP SEARCH
PLAY
FF
STOP
REC
PAUSE
MENU
TV CH +
3 OK
T
V
V
O
L
–
SHUTTLE
PLUS
TV CH –
TV
V
O
L
+
POWER
NUMBER
CH
+/–
SP/EP
FF (Fast-Forward)
PAUSE
MULTI BRAND
REMOTE CONTROL UNIT
Dear Customer,
Thank you for purchasing this JVC Video Cassette
Recorder.
QUICK ST
AR
T*
MONO/Hi-Fi/SUPER VHS
VIDEO CASSETTE RECORDERS
* Please refer to the HR-S4600U/S3600U’s instruction manual for more detailed information.
A GUIDE TO EASY SET UP AND USE
The Path To Enjoyment
Starts Here . . .
1
CHECK
PACKAGE
CONTENTS
SITUATE AND
CONNECT
VCR
SET CLOCK
AND
TUNER
PLAY BACK
A
TAPE
RECORD
A
PROGRAM
MAKE SURE THAT YOUR PACKAGE
CONTAINS:
VIDEO CASSETTE
RECORDER
RF CABLE (F-TYPE) CONTROLLER INFRARED
REMOTE
CONTROL
UNIT
JOG
SHATTLE
HR-S4600U
“AA” BATTERY x 2
AUDIO/VIDEO
CABLE
S-VIDEO CABLE
1
1
4
7 8
0
2
5
3
6
9
2
4
3
U
Printed in Malaysia
0499 IYV * MW * PJ
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
LPT0190-002A
SITUATE AND CONNECT YOUR
NEW VCR
a–BASIC ANTENNA/CABLE CONNECTION
1 Place the VCR on a stable, horizontal surface.
2 Disconnect your antenna or cable line from your TV.
3 Connect your antenna to your VCR.
4 Connect your VCR to your TV.
5 After completing the basic connections:
● If you’re using a Cable Box, . . .
. . . go to 2b (CATV CONVERTER
CONNECTION) .
● If you’re using an AV connection, . . .
. . . go to 2c (AUDIO/VIDEO
CONNECTIONS).
● If you’re using an RF connection, . . .
. . . go directly to 3 (PLUG & PLAY).
RF CONNECTION
COMBINED VHF/UHF
Back of VCR (example only)
ANTENNA IN
TV OUT
Back of TV (example only)
VHF/UHF
SEPARATE VHF/UHF
b–CATV CONVERTER CONNECTION
OUT IN
CATV Input
Cable
Box
To TV
TV
From
Cable
Box
ANTENNA IN
TV OUT
VCR
With this connection you can view/record any cable channel including scrambled channels to which you have subscribed.
To watch TV with this type of connection
1 Press TV/VCR on remote to engage VIDEO mode.
2 Tune TV to VCR output channel
(3, 4 or AV mode).
3 Tune VCR to Cable Box output channel.
4 Select desired channel on Cable Box.
•You can only view the channel you’re recording.
•You cannot change channels with the
VCR remote control.
TV
VCR
To TV
OUT
CATV Input
ANTENNA IN
TV OUT
From VCR
IN
Cable
Box
With this connection, you can view one scrambled cable channel while recording another unscrambled channel.
To watch TV with this type of connection
1 Press CH or NUMBER keys to select desired channel for recording.
2 Press TV/VCR to engage TV mode.
3 Tune TV to Cable Box output channel.
4 Select desired channel on Cable Box.
•You cannot record scrambled channels.
•To play back a tape, you must tune the Cable
Box to the VCR output channel.
VHF ONLY
UHF
VHF
UHF ONLY
CABLE TV LINE
VHF
UHF
Note:
Exact connector positions and names may differ.
● CONNECTORS WHICH ARE OR MAY BE REQUIRED:
䡲 RF Cable
䡲
300-75 ohm Matching
Transformer
䡲
VHF/UHF Antenna Mixer
䡲
Antenna Splitter
䡲
Antenna Splitter
c–AUDIO/VIDEO CONNECTIONS
AV connection methods differ from one type of VCR to another. First, for any TV and VCR type, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods pictured to the right.
After making the connections, go to 3 (PLUG
& PLAY) .
MONAURAL VHS VCR 佡 AV TV
Hi-Fi VHS VCR
佡
AV STEREO TV
VIDEO OUT
L
AUDIO OUT
R
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
VIDEO IN
L
AUDIO IN
R
SUPER VHS VCR 佡 AV STEREO TV WITH S-VIDEO
INPUT TERMINALS
S-VIDEO OUT
VIDEO OUT
L
AUDIO OUT
R
S-VIDEO IN
VIDEO IN
L
AUDIO IN
R
TV
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
VCR
VIDEO OUT
L
AUDIO OUT
R
Monaural deck owners:
Connect to VCR's AUDIO
OUT
AMP
SET YOUR VCR'S CLOCK AND
TUNER
PLUG & PLAY
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
(
If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually.
墌 pg.11 – 15 of the HR-S4600U/S3600U’s instruction manual)
1 4
Plug the VCR into the
AC outlet.
2
During auto channel setting, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically assigned to CH buttons, and non-receivable channels are skipped.
Don’t press any buttons on the VCR or remote during auto setup.
3
5
When setting is complete, the VCR displays the current time. You can now use your VCR.
“AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel.
NOTES:
5
(refer to page 12 or 13 of the HR-S4600U/S3600U’s instruction manual). Auto channel set has already taken place, and is not affected.
● There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 13 of the HR-S4600U/S3600U’s instruction manual). Auto channel setting has not yet taken place, so please also perform the “Set Receivable Channels” procedure (refer to page 14 of the HR-S4600U/S3600U’s instruction manual).
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project