Technical Sheet BIONIC Series
BIONICSERIES
BIONIC-63 • BIONIC-123 •
BIONIC-12SWA • BIONIC-18SWA
Ultra Compact
Powerful Touring
System
BIONIC SERIES
COMPACT POWERFUL SYSTEM
BIONIC Series
Smart & slim column speakers designed for rental touring jobs and reverberant installations where intelligible,
clear voice reproduction is paramount and where a low profile, discreet column is required.
The BIONIC range of cabinets is the Boxxline Pro Audio’s answer to light installation column speakers, portable
or permanent. The BIONIC comprises two full-range modular columns and two subwoofers, they are very easy
to install and can be done so either horizontally or vertically.
Powered from the sub bass unit. The BIONIC subwoofers include class D amplification, with switching power
supply. The integrated amplification far exceeds the transducers’ needs thus resulting in high output, high
damping factor and extremely low levels of distortion.
All BIONIC amp modules are controlled by the latest generation of Digital Signal Processing with a DSP
integrated in to each cabinet. This DSP, with 56bit internal processing and double dynamics optimizes all the
system components and electronics, providing maximum system efficiency and total protection whilst
significantly and noticeably lowering distortion. Every box comes with different presets which include a basic fullrange preset, various crossovers and a flat preset so that the user can adjust the parameters manually. Ethernet
capabilities are also available which allow the user to see the input level signal, fan speed, power module
temperature etc.
BIONIC-63W /
BIONIC-63BL
BIONIC-123W /
BIONIC-123BL
BIONIC-12SWAW /
BIONIC-12SWABL
BIONIC-18SWAW /
BIONIC-18SWABL
BIONIC SERIES
COMPACT POWERFUL SYSTEM
Key features
• Compact & versatile
• Powered from the sub unit
• DSP presets for wide applications
• Weather proof components
• Easy to use, easy to install
• Portable
• Available in black or white
Applications
• PA system
• Clubs & Theatres
• Houses of worship
• Solo artists, band, DJ
• Public buildings
• Commercial complex
BIONIC-63
BIONIC-123
BIONIC-12SWA
BIONIC-18SWA
BIONIC SERIES
COMPACT POWERFUL SYSTEM
TECHNICAL SPECIFICATIONS
BIONIC-63
6 x 3” speaker with
Components
0.75” voice coil
Frequency Range
150 Hz – 20 KHz (-10dB)
Frequency Response 180 Hz – 20 KHz (± 3dB)
Sensitivity
97 dB ([email protected])
Max SPL
119 dB – 125 dB peak
Coverage Angle
15º ± 5º V
150 W, 300 W program,
Rated Power (AES)
600 W peak
Nominal Impedance
32 Ohms
Connectors
BIONIC-123
BIONIC-12SWA
BIONIC-18SWA
12 x 3″ speaker with
1 x 12″ speaker with
1 x 18″ speaker with
0.75″ voice coil
3″ voice coil
3″ voice coil
150 Hz – 20 KHz (-10dB)
40 Hz – 250 Hz (-10dB)
38 Hz – 250 Hz (-10dB)
180 Hz – 18 KHz (± 3dB)
46 Hz – 250 Hz (± 3dB)
42 Hz – 250 Hz (± 3dB)
96 dB ([email protected])
121 dB – 127 dB peak
127 dB
132 dB
x 100º H
Omnidirectional
Omnidirectional
300 W, 600 W program,
1200 W peak
8 Ohms
2 x Neutrik Speakon NL4MP
1400 W Class D with
2800 W Class D with
switching power supply
switching power supply
& PFC
& PFC
1 x 700 W
1 x 1400 W
1 x 1400 W @ 8 Ohms /
1 x 700 W @ 4 Ohms
2 x 700W @ 4 Ohms
96 KHz / 64 bit double precision DSP .
Power Amplifier
LF Amplifier
Speaker Output
Amplifier
Processing
Control
Control Connections
AC Power
AC Connections
Finish
Material
Dimensions
(HxWxD)
-
User control interface with LCD
Ethernet (OCS) optional / USB (DSP programming)
85 – 270V. 50/60 Hz with PFC
16A Neutrik powerCon TRUE1 with looping output
High resistant water-based paint
15mm Premium birch plywood
Micro-textured epoxy paint
1.5 mm stainless steel
502.5 x 89 x 117
1000 x 89 x 117 mm
7 Kg
13 Kg
Available Colours
403 x 440 x 520 mm
508 x 505 x 704 mm
White & Black
Weight
23 Kg
37 Kg
* Can also be manufactured for outdoor use with an aluminium grill, special polyester protector behind the grill and
an special latex for the cone speakers.
ACCESSORIES
BIONIC-63 / BIONIC-123
BIONIC-CB
BIONIC-12SWA
BIONIC-18SWA
BIONIC-WBI
BIONIC-SA
BIONIC-SA
BIONIC-CBI
BIONIC-PA
BIONIC-SWA/WKIT
BIONIC-SWA/WKIT
BIONIC-WTB
BIONIC-FA
BIONIC-SWA12/NC
BIONIC-SWA18/NC
BIONIC-63/FC
BIONIC-123/FC
(Piece to connect 2
columns together –
Straight)
(Column cabinets
connection – inclinable)
(Piece to connect
columns to wall or truss)
(Flight Case for
4 pcs BIONIC-63)
(Wall bracket for column
installation – inclinable)
(35mm inclinable Pole
adaptor)
(Flying frame for
column array)
(Flight Case for
2 pcs BIONIC-123)
(Sub adapter)
(Wheel kit)
(Nylon cover for 12”)
(Sub adapter
(Wheel kit)
(Nylon cover for 18”)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement