- Max Value Technology Co., Ltd.

- Max Value Technology Co., Ltd.
1
Metrology Products
Digital display unit D300S V2
• Digital display with 8.5’’ touchscreen
• Available in 3 versions :
- 6 USB and M-Bus - 6 USB and 2 Sylvac capacitive probe input
- 6 USB and 4 Sylvac capacitive probe input
• Automatic detection of connected instruments
• New CPU unit (5 times faster that previous version)
• OS based on Windows 7 embedded
• Memorizing of setups and values
• Display and page setting fully configurable (up to 8 channels per page, up to 64 pages)
• RJ-45 Ethernet connector
• General or individual Preset
• Math functions for each channel
• Numeric, analog and statistic display
• Compatible with BLUETOOTH Smart instruments (USB dongle is required)
Swiss Made
Sylvac Inductive probes series
Robust and long lasting ball bearing guidance inductive probes specially designed for multi gauging applications. Excellent repeatability allowing to measure by comparison on
Resolution: <0.1 μm
jigs and fixtures. Available in 2 versions :
Repeatability: 0.15 μm
- Spring push (force given by spring)
- Pneumatic push (force given by air)
S_Cal EVO Bluetooth
®
Professional Bluetooth® calipers coolants and lubricants protected IP67. Sleeping mode after 20 minutes with automatic wake-up by moving
Range Resolution Depth rod
the electronic. Large display, customizable ergonomic button.
Order number
Connection
(mm)
(mm)
(mm)
810.1506
150
0.01
4 x 1.4
Bluetooth®
810.1516
150
0.01
Ø 1.5
Bluetooth®
810.1526
200
0.01
4 x 1.4
Bluetooth®
810.1536
300
0.01
-
Bluetooth®
981.7100
USB Dongle Bluetooth® for PC Windows / D300S
981.7161
Software Vmux
S_Mike PRO
• Professional micrometers coolants and lubricants protected IP67.
• Sleeping mode after 20 minutes with automatic wake-up by moving the spindle.
• Position memorized in sleeping mode (Absolute system*).
• Quick displacement of the measuring spindle 12 mm per rotation.
• High repeatability, the operator cannot influence the measurement result.
• Available in several versions with different anvils.
• Set of 3 micrometers 0-102 mm available.
Hi_Cal 150/300
• Intuitive functions
• Great mobility
• Measurement of internal and external diameters, centerlines, heights, thicknesses, depths, surfaces
• Versions 150 and 300 mm
• Data output USB and RS 232
• Measuring force extremely low and adjustable according to the probe
• No influence of the operator on the measurement result
• Battery life: 40 hours
• Probe constant value memorized even when switched off
• Continually adjustable probe speed
2
Metrology Products
Sylvac Scan 52 Reflex Click
First horizontal SCAN machine specially designed for workshop measurement close to
the machine-tool. The concept is to measure the parts in the same position as they are
machined.
Suitable for first-off part, control in process (SPC), sampling or 100% inspection, our
Sylvac SCAN 52 machines are set to revolutionize the control in workshop.
902.5520
902.5521
Dimeter
Length
Dimeter
Length
0.5 ÷ 52
300
0.5 ÷ 52
300
Measuring range
mm
Numerical interval
mm
0.0001
0.0005
0.0001
0.0005
Limit deviations
μm
(2 + D/100)
(5 + L/100)
(2 + D/100)
(5 + L/100)
Repeatability limit
μm
1
2.5
1
2.5
Rotary headstock
Swiss Made
a
Sylvac Scan 25/50
Entry level vertical SCAN machines for simple applications with attractive design including a profile projection of the component on the left side of
the machine. With the work piece secured, the machine moves the work piece through the optical path whilst scanning the profile. The open design
of these machines make them easily and quickly accessible by the operator. Thanks to the integrated projector, you can always follow the evolution
of the measurement process. Excellent value for money, the perfect solution for the measurement of all your small cylindrical parts.
902.5250
Dimeter
Model
902.5500
Length
Sylvac Scan 25
Dimeter
Length
Sylvac Scan 50
Measuring range
mm
0.25 ÷ 25
200
0.50 ÷ 50
275
Numerical interval
mm
0.0001
0.001
0.0001
0.001
Limit deviations
μm
(1,5 + D/100)
(5 + L/100)
(2 + D/100)
(5 + L/100)
Repeatability limit
μm
1
2.5
1
2.5
a
Rotary headstock
a
Sylvac Scan 50 CE Plus / Plus
With a similar concept of the models 25 and 50, these machines offer in addition a motorized axis used to incline the workpiece to the
helix angle of the thread, thus allowing a true projected image of the thread form. This unique and exclusive Sylvac slewing system allows
to measure much more features on threads, such as minor diameter and root detail, on ball screws for example.
902.5501
Dimeter
Model
902.5502
Length
Sylvac Scan 50 CE Plus
Dimeter
Length
Sylvac Scan 50 Plus
Measuring range
mm
0.50 ÷ 50
200
0.50 ÷ 50
500
Numerical interval
mm
0.0001
0.001
0.0001
0.001
Max. Error limit deviations
μm
(2 + D/100)
(5 + L/100)
(2 + D/100)
(5 + L/100)
Repeatability limit
μm
1
2.5
1
2.5
°
30
15
Rotary headstock
a
a
Slewing mechanism for
thread measurement
a
a
Tilting for thread meas.
Bench table PS16 V2
• A ball bearing, an adjustable and reversible measuring force, as well as many other features and accessories make these tables a must for
your workshop or your inspection room
• Brand new PS16 bench series with modern design and Bluetooth® transmission integrated
• Adjustable measuring force
• Data output Bluetooth® or USB
• Standard measuring anvils Ø1.5mm
• The bench tables PS16 VS/VP are designed to check dimensions up to 50 mm (depends on model)
• These bench tables can be equipped with different kind of tables to fit your needs as well as with several types of anvils of any shapes
3
Metrology Products
Run-out testers
Height of centres 50 mm
Germany Made
Specification
RP 50-200
maximum centre distance
A
mm
Height of centres
B
mm
50
CxD
mm
350 x 110
Dimention of base plate
Flatness of base plate
DIN 876/1
Degree of accuracy
1
T-slot width
mm
10H7
Dial gauge holder
mm
8H7
Travel distance of movable centre
H
Height with stand
Vertically adjustable Roller blocks
or V-block
200
Specification
mm
58
mm
260
V-block
PB 004-53
Rooler block
AB 004-54
Rooler blocks
AB 004-64
d = 5 - 25
d = 2 - 40
d = 2 - 32
•
Vertically adjustable
Contact area in V-block
mm
V-block angle
90°
V-block width
mm
Wheel width
mm
10
8
6
Height of centres at d = 10 mm
mm
65
66
Height of centres at d = 20 mm
mm
Minimum spacing L
mm
Width of T-slot block
mm
10h6
10h6
65
16
10h6
Vertical run-out testers
Height of centres 50 mm
Height of centres 75 mm
Specification
RPV 50-350
maximum centre distance
mm
Height of centres
mm
Dimention of base plate
mm
Flatness of base plate
RPV 75-350P
350
50
75
530 x 105
DIN 876/1
Degree of accuracy
1
T-slot width
mm
10H7
Contact area in V-block
mm
Dial gauge holder
mm
5 - 20
Travel distance of movable centre
mm
8
Distance between guide slot and clamping slot
mm
58
Total height
mm
580
8H7
Taper measuring instrument
Height of centres 50 mm
Height of centres 75 mm
Specification
KMG 1
maximum centre distance with RST 50
mm
with RST 75
Table dimension
AxB
Height of table
Table travel
Sine table dimensions
CxD
mm
200
mm
400 x 100
mm
85
mm
150
mm
330 x 70
Flatness of sine table
DIN 876/1
Degree of accuracy
4
200
1
T-slot width
mm
10H7
Dial gauge holder
mm
8H7
Height with stand
mm
260
Metrology Products
Straightening fixture for hand lever presses
Measuring probe TRT 200
Manual toggle press with
fixture for straightening
Straightening punch RSt-H
Germany Made
Pair of straightening plates RP 1-W
Straightening blocks RB 1/200
equipped with straightening
plates RP 1-w
Straightening table RT 1/200
Specification
RB 1/200
400 x 80
55 x 25
Dial gauge holder
mm
8H7
Height
mm
60
60
Measuring range
mm
5
Size of straightening block
mm
T-slot
mm
Spigot
mm
AxB
35 x 30 x 10
10
RP 1-W
RSt-H
Specification
RT 1/200
mm
Dimensions
TRT 200
35 x 30 x 10
10
10h8
Comparator stands with granite base plate
MT 170 / MT 171 / MT 172 / MT 300
MT 171 HG
MT 300 b-HG
MT 172 HG
MT 170 HG
Specification
MT 170-HG
MT 170- bHG
MT 171-HG
MT 171 b-HG
MT 172-HG
MT 300 b-HG
MT 300 b-HGV
Total height
A
mm
320
320
320
320
405
650
650
Measuring range vertical
B
mm
180
180
180
180
180
500
500
Reach
C
mm
104
Reach up to
104
C
mm
220
220
Table dimensions
DxE
mm
260 x 150
260 x 150
260 x 150
260 x 150
260 x 150
300 x 350
300 x 350
Measurement surface
FxG
mm
200 x 150
200 x 150
200 x 150
200 x 150
200 x 150
300 x 260
300 x 260
mm
35
35
35
35
35
50
50
•
•
•
•
•
•
Column diameter
Smooth column
200
104
Clumn with thread and setting ring
200
Column with hand wheel for
vertical adjustment
•
Horizontal measuring arm with
rotation lock
Dial gauge holder
on request
mm
8H7
Measuring table material
Flatness of measurement surface
as per DIN 876
8H7
8H7
•
Interchangeable dial gauge holder
•
on request
8H7
8H7
•
8H7
8H7
•
•
Granite
Granite
Granite
Granite
Granite
Granite
Granite
00
00
00
00
00
00
00
5
Metrology Products
VERTICAL PULSAR
DIGI ARES
Digital sliding gauge for internal/external grooves
Digital calipers
• Digital sliding gauge for internal/
external grooves
• In hardened stainless steel
• Electronic IP67 mm/inc - cable connect
proximity/usb
• Interchangeable rods
• Supplied with interchangeable rods
with gauged balls 3 mm
Article
Italy Made
• Digital caliper
• In hardened stainless steel
• Upper jaws 45 mm.
• Electronic IP67 mm/inc - cable connect
proximity/usb
• Clamping screw
Range
Resolution
Accuracy
Article
Range
Resolution
Accuracy
I
24-250
0.01
0.02
DIGI ARES 155/47
150
0.01
0.02
E
0-210
0.01
0.02
DIGI ULISSE I/E 250
I
42-240
0.01
0.03
E
0-320
0.01
0.03
I
42-500
0.01
0.03
E
0-420
0.01
0.03
I
42-650
0.01
0.04
E
0-570
0.01
0.04
DIGI ULISSE I/E 400
DIGI ULISSE I/E 500
DIGI REMOR
Digital sliding gauge useful to measure inside grooves and
segger channels
• Digital sliding gauge useful to measure
DIGI ULISSE I/E 650
inside grooves and segger channels
• In hardened stainless steel
• Electronic IP67 mm/inc - cable connect
proximity/usb
DIGI ECO R/L
• Clamping screw
Digital depth caliper
• Digital depth caliper
• In hardened stainless steel
• Electronic IP67 mm/inc - cable connect
proximity/usb
• Push/pull support on the same level
• Clamping screw
Resolution
Accuracy
10-170
0.01
0.03
L
20-180
0.01
0.03
DIGI REMOR
DIGIOLFO
Article
Range
Resolution
Accuracy
150
0.01
0.02
DIGI ECO R/L 200
200
0.01
0.02
• For measure the axiality centricity of
DIGI ECO R/L 250
250
0.01
0.03
a key slot
DIGI ECO R/L 300
300
0.01
0.03
from Ø 8 to Ø 100
DIGI ECO R/L 400
400
0.01
0.03
• Adapter with different pitch
DIGI ECO R/L 500
500
0.01
0.03
DIGI ECO R/L 600
600
0.01
0.03
7.5
3
50
• Key 4-20 mm (optional)
Instrument useful for verification of the perpendicularity of
gear’s channel. Axis “X” and “Z”
• Precise and safe measurements
• Base in hardened stainless steel inox tempre
• Interchangeable accessories
• Internal and external measure
• Accuracy: 1 micron rep.
• I fixed and movable probes
• Couple of rods Ø 10
• Dial gauge 0,01
• Provided couple of accessory
12
Digital key centering
VERTICAL PULSAR
Measurement table (quick check)
6
Range
R
DIGI ECO R/L 150
PULSAR
8
Article
Article
Range
PUSAR 180
0-200
Repeatability
0.001
PUSAR 330
0-330
0.001
PUSAR 180-45°
0-200
0.001
• Surface made in hardened stainless steel inox tempre
• Inside and outside measurements
• Fast, precise and safe measurements
• Axis horizontal range 28 mm
• Axis vertical range 28 mm
• Adjustable measuring force 0-10 N
• Repeatability +/- 0,001 mm
• Vertical regulation with ring system
• Interchangeable accessories
• Dial gauge 0,01
• Ball probes ø 10 mm (art. TS 81260)
• Ball probes ø 20 mm (art. TS 81660)
• Work piece supports pair
• Dial indicator extesion
Metrology Products
Reading
(mm)
Range
(mm)
K 49 AD
0.001
0.2
Water Protected Dial Case
K 50 AD
0.001
0.2
Water Protected Dial Case
K 51 AD
0.001
0.2
Water Protected Dial Case
K 58
0.001
0.2
K 59
0.001
0.2
K 60
0.001
0.2
Digitales DK 30
0.001
0.2
K 36
0.002
0.2
K 36 AD
0.002
0.2
K 37
0.002
0.2
K 38
0.002
0.2
K 46
0.002
0.2
K 46 AD
0.002
0.2
K 47
0.002
0.2
Special Feature
Saw Setting Dial Gauges
0.002
0.1
0.001
1
Movement of Comparator Gauge
KM 1101 W
0.001
1
waterproof / Movement of Comparator Gauge
SI-910
0.001
0.1
Error Free / Movement of Comparator Gauge
SI-914
0.001
0.08
Error Free / Movement of Comparator Gauge
FM 1000 R
0.001
1
Back Plunger
FM 1000 S
0.001
1
Shockproof
FM 1000 S wa
0.001
1
Water Protected
FM 1000 SW
0.001
1
Waterproof
FM 1000 T
0.001
1
FM 1000/5 S
0.001
5
Shockproof
FM 1000/5 S wa
0.001
5
Waterproof
FM 1000/5 SW
0.001
5
Waterproof
FM 1000/5 T
0.001
5
FM 1000/80 S
0.001
1
Shockproof
FM 1000/80 SW
0.001
1
Waterproof
FM 1101
KM 1000 R
KM 1000 S
0.001
0.001
0.001
0.001
TM 2/30 (analog)
0.01
30
TM 5 R (analog)
0.01
5
1TM/2 (analog)
0.01
10
TMD 12 (digital)
0.01
12.5
TMD 25 (digital)
0.01
25
TU 10 (analog)
0.01
10
TU 30 (analog)
0.01
30
TM 2/30
0.01
30
with Contact Point 573/21
TM/2
0.01
10
with Contact Point 573/21
TMD 12
0.01
12.5
with Contact Point 573/18 Ø 1mm
TMD 25
0.01
25
with Contact Point 573/18 Ø 1 mm
PTM (analog)
0.1
10
to measuring the tread depth of vehicle tyres
Water Protected
TM 2/30 Micro
(analog)
0.01
30
1001
0.001
0.1
1001 B
0.001
0.1
Spindle shortened
1001 B wa
0.001
0.1
Water Protected / Spindle shortened
1001 wa
0.001
0.1
Water Protected
101
0.01
0.5
101 B
0.01
0.5
Spindle shortened
101 wa
0.01
0.5
Water Protected
502
0.002
0.2
502 B
0.002
0.2
505
0.005
0.2
505 B
0.005
0.2
505 B wa
0.005
0.2
Standard
0.1
2
Contact Point Ø 10 mm, flat
H
0.1
2
Contact Point (Ø 10 mm, flat) + Supporting foot
from carbide
K 2/42
0.1
2
with shorten case
K 2/43
0.1
2
with Supporting Plate
K 2/61
0.1
2
2 Supporting foot transverse to the case
K 3/30
00.1
2
Spherical Contact Point
K2
0.1
2
Contact Point Ø 10 mm, flat
B
0.1
2
Pointed Contact Point
C
0.1
2
Contact Point Ø 4.8 mm, flat
1
5
Shockproof
5
1
1
1
Movement of Comparator Gauge
1
KM 1000 SI
0.001
0.16
Error Free
KM 1000 SW
0.001
1
Waterproof
KM 1000 T
0.001
1
KM 1000/3 S
0.001
3
KM 1000/3 T
0.001
3
KM 1000/5 S
0.001
5
KM 1000/5 T
0.001
5
SI-180
0.001
0.16
Error Free
SI-918
0.001
0.16
Error Free / Movement of Comparator Gauge
FM 1101 W
0.001
1
Waterproof / Movement of Comparator Gauge
SI-915
0.001
0.08
Error Free / Movement of Comparator Gauge
SI-916
0.001
0.1
Error Free / Movement of Comparator Gauge
TMD 12 (digital)
0.01
12.5
TMD 25 (digital)
0.01
25
TM 5 R (analog)
0.01
5
TM 2/30 (analog)
0.01
30
Shockproof
Shockproof
Back Plunger
10
TU 10 (analog)
0.01
10
TU 30 (analog)
0.01
30
Back Plunger
Shockproof
0.001
0.01
Special Feature
Back Plunger
KM 1000 S wa
TM/2 (analog)
Comparator Gauges
Range
(mm)
Dial Depth Gauges
FM 1000/80-5 T
0.001
Thickness Dial Gauges
Reading
(mm)
Model
TM 2/30 Micro
(analog)
0.01
30
for measuring blind hole with small diameter
PTM (analog)
0.1
10
to measuring the tread depth of vehicle tyres
Comparator Gauges Compika
FM 1000/80-5 S
Dial Depth Gauges
Water Protected Dial Case
K 48
0.001
Dial Test Indicators
Precision Dial Gauges
Water Protected Dial Case
KM 1101
FM 1000/80 T
Germany Made
Saw Setting Dial Gauges
Dial Depth Gauges
Precision Dial Gauges
Dial Test Indicators
Model
for measuring blind hole with small diameter
Spindle shortened
Spindle shortened
Water Protected / Spindle shortened
7
Metrology Products
Cofee Moisture Meter
Grain Moisture Meters
GMK-303
GMK-303CF
- Usuful for measuring Moisture Content of Grains
Korea Made
- Useful for measuring moisture %
- Electrical resistance method
of coffee bean & grains
- Automatic temperature compensation
- Electrical resistance method adopted
- Average data available
- Large digital LCD display
- Battery replacement sign appears
- Temperature compensation
- Large digital LCD display
- Low battery sign appears
- ‘CE’ mark obtained
Specifications
Applications
Application
Coffee Bean, Paddy, Rice, Suybean,
Sunflower, Wheat, Maize (Corn)
Operation Temperature
-10ᵒC ~ +40ᵒC
Rice
9.8% ~ 26.0%
Measuring Range
6.5 ~ 30.0 %
Resolution
0.1%
Brown Rice
9.8% ~ 26.0%
Resolution
0.1 %
Accuracy
±0.5%
Paddy
8.5% ~ 30.0%
Accuracy
± 0.5 %
Power Source
Battery 1.5V x 4EA
Barley
8.3% ~ 30.0%
Power Source
Battery 1.5V x 4EA
Dimensions (L x W x H)
164 x 94 x 40 m/m
Naked Barley
8.5% ~ 25.0%
Dimensions
94(W) x 164(L) x 40(H) mm
Weight
Approx. 1.2 kg
Wheat
9.0% ~ 30.0%
Gross Weight
Approx. 1.8 kg
Cofee Moisture Meter
Wood Moisture Meter
- Capacitance method adopted
- Eletrical resistance method adopted.
- Low battery sign appears
- Easy to operate and quick reading.
- Automatic temperature compensation
- Automatic temperture compensation.
- Average Data Available
- Automatic calibration.
GMK-307C
GMK-1010N
- Large digital LCD display.
- Automatic Calibration
- Low battery sign appears.
- Auto Hold & Auto Off Function are available
- Auto hold & auto off function are available.
Application
Raw Coffee Bean
Measuring Range
4.0 % ~ 15.0 %
Display
Large Digital LCD
Accuracy
± 0.5 %
Resolution
0.1 %
Power Source
Battery 1.5V x 4EA
Dimensions
180 cc
Gross Weight
Approx. 3 kg
Measuring Range
9.0 % ~ 3.50 % (Absolute Moisture)
Accuracy
± 0.5%
Power Source
Battery 9V x 1EA
Approx. 3 kg
SENSE 1
Measuring Range
GMK-701AC
- Easy to use, Compact size & Quick reading.
- Large digital LCD display.
- Automatic temperature compensation.
- Automatic calibration
- Low battery sign appears.
- ‘EM’ & ‘CE’ marks obtained.
0 ~ 45 BRIX %
Resolution
0.1 BRIX %
0 ~ 53.0 BRIX %
Resolution
0.1 BRIX %
Accuracy
± 0.2 BRIX %
Power Source
Battery 1.5V x 3EA
Dimensions
60(W) x 125(L) x 35(H) mm
Gross Weight
Approx. 0.5 kg
Digital Salt Meters
GMK-545A
Accuracy
± 0.2 BRIX %
Power Source
Battery 9V x 1EA
Measuring Range
Dimensions (mm)
154W) x 108(L) x 43(H)
Resolution
0.1 %
Approx. 1 kg
Accuracy
0 ~ 5.0 % : ± 0.1 %
Gross Weight
Cofee Moisture Meter
GMK-305T
- Capacitance method adopted
Tea Grade & Size
Button Color
Tea Size
Tea Grade
- Automatic temperature
Application
Tea Grade
Range
3.5 % ~ 18.0 %
Red
Large
OP/OP1/OPA
Accuracy
± 0.5 %
Medium
BOP1
Resolution
0.1 %
Yellow
Small
FBOP/FBOPF/PKEOE/
FBOPF1/FBOPF SP
compensation
- Average Data Available
0 ~ 5.0 %
Blue
- Low battery sign appears
8
Sensor : 45 Ø x 190 mm
Cofee Moisture Meter
Digital Refractometers
Measuring Range
Green
Sensor
Instrument: 85(W) x 170(L) x 36(H) mm
Weight
Sample Barrel : 143 (H) x 75 (DIA) mm
Sample Volume
Wood
Dimensions
Body : 150(W) x 230(L) x 56(H) mm
GMK-1010N
Application
Dust
BOPF/BOP SP/
BOPF / DUST
Power Source
Dimensions
Battery 6V x 1EA
Body : 150(W) x 230(L) x 56(H) mm
Sample Barrel : 143 (H) x 75 (DIA) mm
Sample Volume
Approx. 110 mL
Gross Weight
Approx. 3 kg
Metrology Products
Precision Balance
Precision Balance
EMB-V
EWJ
Germany Made
Analytical Balance
ALS-A·ALJ-A
Entry level laboratory balance with integrated density
determination function
High-quality precision balance with automatic internal
adjustment and EC type approval [M]
Precision and price down to a point, with external and
internal adjustment
Model : EMB 200-3V
Weighing range : 200 g.
Readout : 0.001 g.
Model : EMB 2000-2V
Weighing range : 2000 g.
Readout : 0.01 g.
Model : EWJ 300-3
Weighing range : 300 g.
Readout : 0.001 g.
Model : EWJ 600-2M
Weighing range : 600 g.
Readout : 0.01 g.
Model : ALS 160-4A
Weighing range : 160 g.
Readout : 0.1 mg.
Model : ALS 250-4A
Weighing range : 250 g.
Readout : 0.1 mg.
Price: 14,500.-
Price: 14,500.-
Price: 23,900.-
Price: 19,900.-
Price: 53,900.-
Price: 55,900.-
Moisture Analyser
Stainless Steel Platform Scale Computing Scale
MLS-C
SFB-H
CXB
Price: 59,000.-
Price: 15,900.-
Infrared moisture analyzer with 100 memories and
graphic display
Stainless steel platform balance with dust and spray
protection to IP65
Entry level model in professional counting, also with
EC type approval [M], counting resolution of 30,000
points Features
Model : DBS60-3 Readout [d] : 0.001 g / 0.01 %
Weighing range [Max] : 50 g
Reproducibility, weight of sample 2 g : 0.24 %
Reproducibility, weight of sample 10 g : 0.04 %
Model : SFB 50K5LHIP
Weighing range : 50 kg.
Readout : 5 g.
Model : SFB 100K10HIP
Weighing range : 100 kg.
Readout : 10 g.
Model : CXB 3K0.2
Weighing range : 3 kg. Readout : 0.2 g.
Counting Res. : 30,000 point
Price: 39,000.-
Price: 39,900.-
Industrial Platform Scale
Test Weight
IFB
Robust platform scale with EC type approval [M]
Model : IFB 6K1DM
Model : IFB 60K10DM
Weighing range : 3 | 6 kg. Weighing range : 30 | 60 kg.
Readout : 1 | 2 g.
Readout : 10 | 20 g.
Price: 18,900.-
Price: 20,900.-
Test
weight
Cylindrical
shape with lifting
knob, polished
stainless steel
Compact shape
with carrying
grip, polished
stainless steel
Cylindrical
shape with lifting
knob, polished
stainless steel
or nickelplated
and polished
brass
Compact shape
with carrying
grip, finely
turned stainless
steel
Cylindrical
shape with lifting
knob, finely
turned stainless
steel
Cylindrical
shape with lifting
knob, finely
turned brass
Available
classes
E1, E2
E2, F1
F1
adjusted to F1
error limit class
F2, M1
M1, M2, M3
Benefits
• High-quality
test weight for
analytical and
precision
balances
• Highly-refined
surface
• Ideal shape of
the top for good
grip
• Affordable test
weight for
analytical
and precision
balances
• Highly-refined
surface
• Ideal,
high-quality
test weight for
precision
balances
• Ideal shape of
the top for good
grip
• Affordable test
weight for inhouse checking
of precision
balances
• Ideal test
weight for
commercial
and industrial
scales
• Ideal shape of
the top for good
grip
• Affordable
test weight for
commercial and
industrial scales
• Ideal shape of
the top for good
grip
9
Metrology Products
Internal measurement
Aerosol devices
Germany Made
Application range from 2.5 mm to 400 mm
Kroeplin measuring instruments
ensure the quality of aerosol containers
Internal comparison measurement
Application range from 50 mm to 430 mm
Internal measurement with 3-point contact
Application range from 7 mm to 105 mm
Kroeplin solves measuring applications of
Aluminium aerosol containers
Internal measurement for blind holes
Tinplate aerosol containers
Application range from 20 mm to 70 mm
Aerosol receptacles with valves
External measurement
Application range up to 200 mm
Aerosol receptacles
Tube wall measurement
Application range up to 100 mm
Valve
Measurement of foamed material and foils
Application range up to 100 mm
10
20 mm aerosol receptacles
Metrology Products
Roughness Measurement System
COMACT II and DH-8
Swiss Made
Technical Data
DIAVITE COMPACT II
DIAVITE DH-8/App
Parameters
› ISO/DIN: Ra, Rz (DIN), Rmax, R3z, Rt, Rq (RMS), Rk, Rp, Rv, Rpk, Rvk, MR1, MR2, Rpc, C1, C2, percentage contact area, C0, Cz
› JIS: Ra (JIS), Rz (JIS)
› ISO 12085: R, AR, Rx
› additional parameters possible with optional PC software
Measuring range
› Ra, Rq: 0 – 20.00 µm | 0 – 800 µin
› All other measuring values: 0 – 350.0 µm | 0 – 1400 µin
Resolution
› Ra, Rq: 0.001 µm
› All other measuring values: 0.01 µm
Output
USB interface
Humidity
max. 80 %, not condensing
Languages
German, English, French, Italian, Spanish, Polish
Tracing system
Analog hall effect technology with high linearity output signal
Diamond tip
Radius: 5 µm, 90° (standard) or 2 µm, 60° (option)
Tracing skid
25 mm (standard tracer)
Static measuring force
Stylus < 0.5 mN
Static tracking force
Skid < 0.15 N
Tracing speed
COMPACT II: 0.5 mm/s
Reverse speed
1.0 mm/s
Motor unit
VH (tracer with skid) or VHF (all tracers with and without skid)
Dimensions instrument
COMPACT II: 140 x 75 x 60 mm
Dimensions motor unit
ca. 20 x 33 x 136 mm (with supporting shoe)
DH-8: 0.25, 0.5 und 1.0 mm/s
DH-8: 245 x 130 x 78 mm
Fully - Automatic Measuring Machine
UMP 50 - HP for Dial Gauges
Germany Made
... also to DIN EN ISO 463 : 2006, DIN878:2006, China-Norm: JJ34-2008
for testing...
• Analog and digital dial gauges
• Dial test indicators
• Inkremental and induktive probes
Characteristics:
• userfriendly service on screen
• automatic operation after provide measuring plans
• quick semiautomatic operation
• the DIN EN ISO 463 / DIN878:2006 / China-Norm JJ34-2008 included
• full conformity with Abbe`s comperator principle
• quick run up and down
• autofocus with mouseclick
• zoom
• extreme short calibration time with PC - control - system
• indication - tabular or diagram
• printout of calibration certificates
• free designing of calibration certificates with report generator
• export of data
• extensive measuring instruments library
Technical specification:
• measuring range: 50 mm
With high - precision scale
• reading: 0,01μm
• margin of error: (0,15 + L/150) μm L in mm
• therm. length coefficient of expansion α therm ≈ 0 x 10-6 K -1
(Zerodur® - Glaskeramik)
• measuring standard: Heidenhain - measuring system
• speed range: 1,5 mm/s
• reference value temperature: 20° C
• interface: RS 232 / USB
11
Metrology Products
BlueSYSTEM SIGMA
Swiss Made
คุณล ักษณะเด่นๆ ของเครือ
่ งมือรุน
่ ใหม่น ี้ มีด ังนี้
• กระทัดรัดและหน ้าตาทีไ่ ด ้รับการออกแบบมาเพือ
่ การวัดละเอียดอย่างดี
่ วิทยุแบบบลูทธ
ู ทีเ่ ป็ นทีร่ ู ้จักดีในระดับสากล (อุปกรณ์เสริม)
• การส่งข ้อมูลผ่านคลืน
• จอแสดงผลแอลซีดใี หญ่และง่ายต่อการอ่าน สามารถอ่านค่าได ้ทัง้ สองด ้าน
่ มต่อเมือ
• เครือ
่ งมือแต่ละตัวมีหมายเลขทีอ
่ ยูป
่ ระจ�ำตัว ทีช
่ ว่ ยไม่ให ้เกิดการสับสนในการเชือ
่ อยู่
ในห ้องเดียวกัน
• ด ้วยการติดตัง้ ตัว รั บแสงอินฟราเรดทีต
่ ัว เครื่อง ท่า นสามารถสั่งการท� ำ งานได ้ด ้วยรีโ มท
อินฟราเรดให ้เริม
่ การวัด
• มีความไวในการอ่านให ้เลือก ถึง 2 แบบ
• BlueLEVEL 0.001 มม/ม: ช่วงวัด ± 20 มม/ม
• BlueLEVEL 0.005 มม/ม: ช่วงวัด ± 100 มม/ม
• ค่าความเป็ นเส ้นตรง ตามมาตรฐาน DIN 2276
• เครือ
่ งมือดิจต
ิ อลทุกตัว ติดตัง้ พอร์ท RS232- / RS485
่ าตรฐาน 1.5 โวลท์, ชนิด ซี
• ใช ้ไฟจากแบตเตอรีม
• ท�ำตามมาตรฐานยุโรป CE และ EMC
BlueLEVEL-2D
BlueLEVEL-2D เป็ นเครื่อ งมือ วั ด ความละเอีย ดสูง และกระทั ด รั ด ซึง่ สามารถวั ด ความลาดเอีย งของแกนสองแกนได ้ในเวลาเดีย วกั น
ดู ภ ายนอก จะเห็ น ขนาดเล็ ก แต่ ภ ายในประกอบด ้วยเซนเซอร์ 2 ตั ว ที่แ กน X-Y พร ้อมด ้วยหน า้ จอแสดงผลแบบกราฟิ กสีแ บบ 2D และ
ด ้วยความเล็ ก กระทั ด รั ด และความแม่ น ย� ำ สูง เครื่อ ง BlueLEVEL-2D จึง เหมาะส� ำ หรั บ การวางแนวและตั ง้ เครื่อ งจั ก รต่ า งๆ ได ้เป็ นอย่ า งดี
Sensitivity
ความไวในการอ่าน
[mm/m]
Clinotronic PLUS
BlueCLINO
Range
ช่วงการวัด
[mm/m]
0.001
±20
0.005
±100
่ ้านได ้รั บ การปรั บ แต่ง มาด ้วยความแม่น ย� ำ และสามารถมั่ น ใจในค่า การวั ด ซ�้ ำ ได ้
Clinotronic PLUS มีช ่ว งการวั ด ที่ ±45° ด ้วยฐานวั ด ทั ง้ สีด
่ ้าน สามารถใช ้วั ด ได ้ด ้วยความมั่ น ใจได ้เป็ นอย่า งดี สามารถกดปุ่ มเลือ กหน่ ว ยแสดงให ้เห็ น เพื่อ ความเหมาะสมกับ งาน
ช่ว ยให ้ฐานทั ง้ สีด
นั ้น ๆได ้อย่า งสะดวก สามารถเห็ น สัญ ลั ก ษณ์ ลั ก ษณะการเอีย ง เพีย งการกดปุ่ มง่า ยๆ ก็ ส ามารถเข ้าหมวด Absolute หรือ Relative zero
่ มต่อ เข ้ากับ อุป กรณ์ อ ื่น ๆ ของ Wyler หรือ เชือ
่ มต่อ โดยตรงด ้วยสายเคเบิล
้ เฉพาะ
ได ้อย่า งสะดวก มีช ่อ งอิน เตอร์เ ฟส RS485 เพื่อ การเชือ
เข ้ากับ เครื่อ งคอมพิว เตอร์ไ ด ้
Sensitivity
ความไวในการอ่าน
[mm/m]
Limits of error
ขีดจ�ำก ัดของความผิดพลาด
[arcmin]
Range
ช่วงการวัด
[°]
0.020
1...2 + 1 digit
±45
BlueCLINO ได ้รับการพัฒนาบนพืน
้ ฐานของรุน
่ ทีเ่ ป็ นทีร่ ู ้จักอย่างดี คือรุน
่ CLINO 2000 มีคณ
ุ สมบัตท
ิ วั่ ไป ดังนี้
•
•
•
•
•
ใหญ่และมีหน ้าจอแสดงผลสี ง่ายต่อการอ่านค่า
มีหลากสีให ้เลือก
มีรป
ู แบบต่างๆในการแสดงผลให ้เลือก เช่น แบบกราฟแท่ง หรือ แบบฟองอากาศ
มีหน่วยวัดต่างๆ ให ้เลือก
มีความแม่นย�ำสูงตลอดช่วงการวัด ±60° ด ้วยตัวช่วยชดเชยอุณหภูมภ
ิ ายในเครือ
่ ง
Sensitivity
ความไวในการอ่าน
[arcsec]
Limits of error (within 6 months)
ขีดจ�ำก ัดของความผิดพลาด (ช่วง 6 เดือน)
[arcsec]
Range
ช่วงการวัด
[°]
5
12 + 0.027% MW
±60
Mw = ค่าทีว่ ด
ั ได ้
Mw = measured value
55 SPIRIT
Horizontal Spirit Level
12
ส�ำหรับการวัดบนผิวราบแนวนอนและผิวโค ้งของท่อ มีด ้ามจับแยกต่างหากและมีตวั ป้ องกันหลอดแก ้วระดับน�้ ำด ้วย พร ้อมกล่องไม ้
Sensitivity
ความไวในการอ่าน
[mm/m]
Range
ช่วงการวัด
[mm/m]
0.02
± 0.06
0.04
± 0.12
0.05
± 0.15
0.10
± 0.30
0.30
± 0.90
smallest
เล็กทีส
่ ด
ุ
[mm]
Dimensions – length x width x height
ขนาด – ยาว x กว้าง x สูง
[mm]
100 x 32 x 35
500 x 60 x 57
biggest
โตทีส
่ ด
ุ
[mm]
Metrology Products
Smart_Projector Version 4
Smart_Color
State-of-the-art Measuring Machine
Camera
5 Mega Pixel Industrial
PC Device
Touch Screen AIO with Win 7/8 x64 PRO,
Monitor resolution 1920x1080 HD
Light receiving lens
Double telecentric lens
1
Field of View (FOV)
22x16 mm
Repeatability accuracy2
±0.2 μm
Measurement accuracy2
±1.5 μm
Illumination system
Software programmable Collimated telecentric light
[back]
Software programmable 4 sector leds [front]
Software programmable Diffused led light
Operation ambient °C
+10 to 40°C
Power supply
24 Vcc
Italy Made
Fast Automatic Spectrophotometer
1
(standard models - other FOV available on request)
2
Precision of measurement (±μm) of a line, obtained measuring a pin gauge (diameter) located approximately in
FoV center, best focus position, at 25° C ±1°
• Embeds all the updated knowledge about Color differences tests and International
Standards
• Perform full and automatic reporting
• Eliminates the subjectivity of operator-based visual controls
• Allows to increase number of items checked and the SPC
• Improves incoming and outgoing quality of plastic and clear items
• Reduces time and costs of quality controls
SPECIFICATIONS
• Complete check of transmittance proprieties according to EN1836; ANSI Z80.3; AS/
NZS 1067.
• Options: ISO 12312-1; GB 10810.3 & QB 2457-99; Uniformity; Photocromatic;
Polarizing.
• Complete check of color differences ΔE, L*, a*, b*.
• CIELAB 1976, CIELAB 1994, CIELAB 2000, CMC color spaces.
• A, C, D, F, light sources.
• 2° and 10° degrees of observation.
• Check cycle and full report output in less than 1 second.
• Measurement range 280 - 780 nm.
• Interface with external PC: USB 2.0.
• Power supply 12 Vcc included.
• Dimensions 570 x 160 x 80 mm - excl. knobs.
Instant Vision Measuring
System iVS Series
Video Microscope System
VM-100
Price 69,000.Not include monitor
Zoom Lens
0.7X ~ 4.5X continuous click room lens
Zoom ratio 6.5:1
Model
iVs-30
iVs-60
iVs-80
iVs-160
0.3X Double
Telecentric Lens
0.17X Double
Telecentric Lens
0.088X Double
Telecentric Lens
0.088X Double
Telecentric Lens
Working
Distance
110 mm
110 mm
120 mm
160 mm
Wide Field
Ø30mm
Ø60mm
Ø80mm
Ø120mm
Lens
Z-axis Travel
Effective space 150mm; adjustable focus travel50mm; working distance 85mm
Elevator Group
Precision coarse and fine adjustment
Light system
Continuous adjustable LED bottom light and LED
surface light
Measurement
Accuracy
± 2 μm
± 3 μm
± 4 μm
± 7 μm
Video Imaging System
Built-in FULLHD sensor , USB, VGA, SD card
integrated camera
Repeatabilition
Accuracy
± 1 μm
± 2 μm
± 2 μm
± 5 μm
Storage Capacity
8G
Camera
VGA Industrial Camera
Parameters
1. Simple graphic operation
2. Support USB and VGA sync-output, USB interface
can connect to mouse
3. Take picture: 30 per second, picture can be
made dynamic contract
4. Available to setup manual exposure time
5. Output function with cross line
6. 200 million pixel
2/3’’ 5 million pixel B/W camera (Ethernet)
Digital controls, automatic memory
Illumination
Telecentric Green LED Contour illumination
Output data
Test data, reports, determine the results (OK, NG, WAIT), etc
Ring White LED illumination
Measurement
Mode
Manual / Automation
13
Metrology Products
Automatic, CNC control
3D Vision Measurement Machine
Video Measuring System
EV-2515
SPARTAN-3020 / 3020T
Model : SPARTAN-3020T
* SP3020 + RENISHAW Touch Probe
* EASSON 3D Software
Free !!
- Reinshaw Touch Probe
- Sphere & Ring Gauge
- 3D Software
- Cabinet
Free !!
- Install & Training
- Certificate
- Working Cupboard
X,Y,Z Measurement Travel : 300 x 200 x 200 mm
Repeatability : 2 µm
Max Table Load : 30 kg.
Machine Weight : 410 kg.
Resolution : 0.001 mm
X,Y,Z Measurement Precision : (3+L/200) µm
Optical Magnify : 0.7-4.5X, Vision Magnify : 25-145X
after install the attached lens magnify : 12-290X.
Z axis auto focus
Software Easson 2D version 6.0 with SPC
Acer Computer with 18.5” LCD and licensed
English XPwork table
X/Y/Z with step motor, 100 mm/s
Motorized auto-zoom lens & 3 atached
lens (0.5X, 1.5X, 2X)
Vertical Profile Projector
VB12-1550
2D Manual Video Measuring
Machine VMM-3020
Free !!
- Install & Training
- Certificate
- Working Cupboard
● 300mm diameter screen with digital protractor
● Four size of precision movement work-stages
● Double steel guide for stage lifting focus system
● Halogen profile and surface illumination adjustable
● Geometric multifunctional data processing system
upgrade to DRO DP300
● Bult-in Mini-printer;
● Available 10X,20X,50X,100X objective ,rotary table,
edge detector, etc.
- Metal stage dimension : 340 x152 mm
- Glass stage dimension : 196 x 96 mm
- Stage travel X-axis : 150 mm
- Stage travel Y-axis : 50 mm
- Stage travel Z-axis : 90 mm (for focusing)
- Accuracy : ≤3+L/75(µm)
- Resolution of X and Y-scale: 0.001 mm
Measuring Microscope
SMM510
Free !!
- Install & Training
- Certificate
- Working Cupboard
Metal table sizes : 510x290 mm
Specification:
Glass table size : 350x280 mm
Working travel : 100x50 mm
Travel : X,Y : 300x200 mm
Metal Stage Size : 252 x 152 mm
Dimension : 770x590x1000
Z-axis travel : 150 mm
Glass Stage Size : 196 x 96 mm
Work distance : 108 mm
Resolution : 1um
Resolution of X, Y, Z scales : 1µm
Measuring accuracy : ≤5um
X,Y-axis accuracy : ≤(3+L/200)µm Video system
Measuring Device : Digital Readout DP100
Camera : Color 1/3” CCD camara
Optical Magnification : 0.7~4.5X
Max. Height of Specimen : 115 mm
Digital Magnification : 10~300X
Max. Weight of Specimen : 5Kg
Object view-field : 10.6~1.6mm
Maximum Magnification : 150x
Contour and surface illumination : Ring LED and
Minimum Magnification : 20x
Objective
- Magnification :10X(std.), 20X(opt.), 50X(opt.), 100X(opt.) brightness can be setup
- Object view-field : Ф30mm, Ф15mm, Ф6mm, Ф3mm
- Work distance : 77.7mm, 44.3mm, 38.4mm, 25.3mm
- Digital readout : DP200 mutifunction data processing
system
- Illumination : Surface and contour illumination : 24V/150W
hologen lamp
- Dimension : 800x550x1150mm
14
X,Y,Z measurement travel : 250x150x150 mm
Overall dimensions : 100x60x140 cm
Repeatability : 2 micron
Max table load : 25kg
Operation mode : Manual
Resolution : 0.001 mm
X,Y,Z measurement precision (3+ L/200) micron
Light source : system software controlled adjustable 4-way surface
light and straight
adjustable contour light
Structure : 00 grade granite base and mast
Lens : High precision Tele-centric lens
Precision measuring head : English RENISHAW precision touch
probe
Magnification : Optical enlarging rate 0.75-4.5x, image enlarging
rate 25-145x
Vision system : High resolution CCD lens (1/2” SONY CCD sensor
& special SPC)
Standard Magnification : 30x
Standard Working Distance : 67 mm
Optical tube : Monocular with 30º depression
angle 15X Eyepiece with Crossline Reticle
Metrology Products
Monocular Stereo Zoom Microscopes
3D Dimensional
Inspection Microscope
VM6517
VHL3000
- 6.5:1optical zoom range:
Conventional Len
- Dynamic zoom magnification range: 0.1x-450x;
- High contrast images and vivid colors;
- Large zoom visual field: 0.01-125.68mm;
- Adjustable working distance: 34-356mm.
Conventional Len
Specification:
Zoom Lens Range : 0.7x~4.5x (zoom ratio 6.5:1)
Working Distance : 91 mm
Color Camea : 1/3” VGA; 2M
LCD Monitor : 17” HDMI HD Microscope
Electronic Magnification : 50.4x~324x
20X
Illumination : 4-Division LED Illuminator
Resolution : 4.0 µm
VM65 Lens
VM65 Lens
- Use 360° all-direction microscopes obtain much big
depth of field,
three-dimensional many-sided;
- Zomm, multi-anglens observation;
130X
- Joint agile, control convenience;
- LED light source, three-dimensional image in focus;
VM65 Lens Advantage:
Ultra-high numerical aperture (N.A.):
It is the key element that the numerical aperture of lens is to determine the performance
(resolution, depth of focus and light intensity), The higher the value of N.A., the higher
the resolution and brightness.
The maximum resolution is 2-times than the conventional lens
With many years experience and the essence of POMEAS optical technology, zoom
A5 achieves the excellent resolution.
High Zoom ration: 6.5: 1
VM65 is a high-performance optical zoom system made of 12-group lens, the orking
distance and visual field is adjustable in different magnification with C-mounts and
auxiliary Objectives, it is a universal zoom optical system for the industry application
- Big depth of field, high resolution ratio (need digital vidicon stand by);
- Precise quantity measure function (need computer stand by);
- 0.35x-2.45x three-dimensional microscope body;
Specification:
Obseerving Angle : 45° (VHL-3010) or 55° (VHL-3020)
Optical Zoom Magnification : 0.7x~4.5x
Video Zoom Magnification : 33x~214x
Rotary Angle : 360°
Illumination : Adjustable LED Ring Lightsource
Rotating Speesd Control : Adjustable DC Motor
TrueChrome II
Technical Specifications:
Sensor
IMX236
Sensor size
1/2.7” (assemble with Exfocus05
Can achieve 80% field of view
Live Resolution
1920x1080
Frame speed
1920x1080 30fps via USB2.0
1920x1080 60fps via HDMI
Image Record
Video Record
High speed SD Card (8G)
1080p 30fps in SD Card
1080p 30fps in PC
Expouse time
0.001 sec - 10.0 sec
White balance
Auto
Settings
Gain, Gamma, Saturation, Contraction
Built-in software
Cloud 1.0 ver
PC software
ISCapture
Output model 1
USB2.0
Output model 2
HDMI
System Compatible
xp, win7/8, 32/64bit, MAX OSX
optical port
C-Mount
Sample Images In Full Resolution, Cell Image, Semiconductor Images
15
Metrology Products
Profiel Projectors
Italy Made
HELIOS 350-H & 350-V
350H
Projection system
Protractor screen with reticule for angular measurements with digital display, 1’ resolution
350V
HELIOS
350-H
HELIOS
350-V
axis
horizontal
vertical
Ø mm
350
350
MODEL
Metal projector body with sliding darkening hood
•
•
Swivelling lamp-holder arm
•
□
Diascopic projection with halogen lamp 150 W 24 V and motor fan lamp cooling
•
•
Episcopic projection with two way fibre optics and motor fan lamp cooling
•
•
Automatic protection against over-heating
•
•
Automatic stand-by for lamps and digital display Model M-Touch
•
•
450x150
200
□
150
100
+/-15°
•
15
320x150
200
100
□
100
□
•
10
Measuring system for the worktable displacements and protractor screen consisting of:
- Linear transducers and rotating encoder
- Digital displays/data processor model M-Touch with optical sensor as per description
•
•
Interchangeable magnification lens 10X
•
•
Interchangeable magnifications lenses 20 - 50 - 100 X
◊
◊
Unified optical condenser
•
•
To improve the optical performance of 20-50 and 100X magnification lenses the
dedicated respective optical condensers are available
◊
◊
Standard worktable:
- Dimensions
- Horizontal movement
- Transverse movement
- Vertical movement
- Focussing movement
- Helix, 1’ reading
- Release system for fast horizontal travel
- Allowed weight (approx)*
mm
mm
mm
mm
mm
kg
2D Optical System for real time automatic measurement Profile Projectors
MICROGENIUS
ATLAS 600
TECHNICAL DATA
MICROGENIUS
SMALL
MICROGENIUS
TECHNICAL DATA
ATLAS 600
Projection system
horizontal axis
Measuring range
mm
50x37,4
83,8x62,9
230x192
Working distance
mm
159
279
500
Protractor screen with reticule for angular measurements
with digital display, 1 resolution mm
600 ø mm
Field depth
mm
51
145
498
Metal projector body with darkening hood
Standard
Optical distortion*
mm
Revolving lens holder turret with three lens seats
Standard
Swivelling lamp-holder arm
Standard
Horizontal diascopic projection with halogen lamp with
two light intensitiy and motor fan lamp cooling
Standard
Dimensions
650x150 mm
Powered horizontal movement
300 mm
Powered vertical movement
200 mm
Focussing movement
+/- 25 mm
Helix, 1’ reading
+/- 15°
Admitted weight (approx)
150 kg
up to <0,03%
Telecentric LED
condeser or flat
LED lighting
Yes
5 Mp camera
Yes
64 bit computer
with monitor
Yes
Windows operating
system
16
MICROGENIUS
MAX
Yes
Dimensions
mm
Weight
kg
440x460x1280
550x600x1560
700x700x2400
45
80
130
Metrology Products
Contour and Roughness Measurement
LC10
Germany Made
• The entry-level system for the entire variety of contour measuring tasks
• Contour and roughness in one single measurement with the optional roughness module
• Very good resolution of 30 nm directly at the stylus tip
• Y-table optional
• Body made of high-strength aircraft aluminium
• Axis guide and head integrally made from one workpiece
• X axis permanently and absolutely backlash free connected to the Z axis
• Contactless and absolutely wear-free linear-incremental measuring system
• Machine calibration (including stylus tip calibration) in less than 3 minutes
• Quick stylus tip replacement with optacom quick-release fastener. No tools required and
no accuracy loss
• High-precision linear axes with integrated drive
Resolution in X and Z axis:
0.02 μm
Maximum measuring force:
Resolution at the stylus tip:
0.03 μm
Measuring speed:
Measuring range (X axis , Z axis):
225 mm
Radius of the stylus tip:
Measuring system:
optical, incremental and contactless in all axes (X, Z, T)
10 - 150 mN
0.1 - 2 mm / sec (optimized automatically)
Angle measurement:
Accuracy:
+/- (1.5 + L/100) μm
Dimensions (W x D x H):
Straightness:
+/- (1.5 + L/100) µm
Weight:
from 0.002 to 1 mm
78 ° upwards; 87 ° downwards
950 x 380 x 725 mm
150 kg
Contour Measurement
MessKing
Colors for the modern measuring room
Resolution in X-, Z- and T-axis:
0.05 µm
Measuring range X:
190 mm
Measuring range Z:
275 mm
Measuring range Y:
Table load:
Accuracy:
Straightness:
Accessories and options
Y-table manuel /
automatic
Quick-release
fastener
Top- Down
Calibration
standard
Calibration
standard
PC-Speedy
100 kg
+/- (2 + L/50) µm
2 + L/50 µm
17
Metrology Products
Horizontal Measuring Instrument
THV & TELS
Swiss Made
Display units:
Heidenhain ND1100
PC with TRIMOS-WinDHI Soft ware
Calibration of plain and threaded plug
gauges using the floating table
Checking of internal diameters
Measuring of precision parts
Checking of test indicators
Adjustable support for a
constant measuring force
Floating table for more accurate
internal measurements
Checking of external diameters
Checking of internal diameters
Checking of internal grooves
Checking of lengths
Technical data:
TELS
Absolute measuring range
mm (in)
50 (2)
25 (1)
Application range (external measurements)
mm (in)
100 (4)
100 (4)
Application range (internal measurements)
mm (in)
100 (4)
100 (4)
µm
0.2+ L (mm)/250
1.5
Max. permissible errors 1)
Repeatability (2s)
µm
0.1
0.1
mm (in)
0.1 ÷ 0.00001 (.0001÷ .000001)
0.1 ÷ 0.0001 (.001÷ 00001)
N
0÷4
3-8
1)
Resolutions (depending on display unit)
Measuring force (adjustable)
1)
THV
Instruments with integrated measuring system. Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
Horizontal Measuring Instrument
Labconcept Premium
Technical data:
Measuring range
Max. permissible errors 1)
18
Checking of test indicators
Checking of snap gauges
Temperatue compensation
system TempComp
Checking of taper
thread ring gauges
Special design for measurement
of large taper threaded gauges
300
500
1000
mm (in)
370 (14)
550 (21)
µm
0.1 + L (mm) / 2000
µm
0.05
mm (in)
0.01 ÷ 0.00001 (.0001 ÷ .000001)
Max. displacement speed
mm / s
400
Measuring force
N
0 ÷ 12
Weight
kg
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
78
1050 (41)
0.15 + L (mm) / 2000
Resolutions
Repeatability (2s) 1)
1)
Checking of dial indicators
95
125
Metrology Products
Vertical Measuring instruments
Height Gauges V3 / V4 / V5 / V6
Swiss Made
Height Measurements
Diameter
Measurements
Min/Max/Delta
Perpendicularity
Long Probes
Accessories
User-Friendly
Functions
Maximum Contrast
• Measuring ranges 400 and 700 mm
• Extremely easy to use
• Electronically adjustable measuring force
• Larger than 300 mm probes as standard
• Vast range of accessories
• All adjustments possible without tools
• RS232 and USB interfaces
V3
Technical data:
V4
400
700
400
700
Measuring range
mm (in)
407 (16)
711 (28)
407 (16)
711 (28)
Measuring range with extension
mm (in)
508 (20)
812 (32)
719 (28)
1023 (40)
Max. permissible errors, EMPE
μm
7
8
5
7
Repeatability, RMPE (2s)
μm
2 (Ø: 4)
2 (Ø: 4)
2 (Ø: 4)
2 (Ø: 4)
μm
10
15
10
15
Frontal squareness deviation, SMPE
Resolution
mm (in)
0.001 (0.00005)
0.001 (0.00005)
Measuring force
N
0.75 ÷ 1.5
0.75 ÷ 1.5
Autonomy
h
40
40
No
Yes
Air cushion
119,900.-
Promotion Price
139,900.-
159,900.-
V5
Technical data:
400
174,900.V6
700
1000
400
700
1000
Measuring range
mm (in)
407 (16.0)
711 (28)
1110 (43.7)
407 (16.0)
711 (28)
1110 (43.7)
Measuring range with extension
mm (in)
719 (28.3)
1023 (40.3)
1422 (56)
719 (28.3)
1023 (40.3)
1422 (56)
Max. permissible errors, EMPE
μm
Repeatability, RMPE (2s)
μm
Frontal squareness deviation, SMPE
μm
Resolution
2.5 + L(mm)/300
2 + L(mm)/400
1 (Ø: 2)
2
5
8
11
5
8
mm (in)
0.001 (0.00005)
0.001 (0.00005)
Measuring force
N
0.75 ÷ 1.5
0.75 ÷ 1.5
Autonomy
h
40
20
Yes
Yes
Air cushion
Promotion Price
165,000.-
195,000.-
269,900.-
199,900.-
239,000.-
11
309,900.-
Note: The above values have been determined according to ISO 13225. They are valid with the standard measuring insert
(TA-MI-101), at a temperature of 20 ± 0.5 °C and relative humidity of 50 ± 5%.
19
Metrology Products
ALUMESS Starter Kit A (99 Pieces)
1
2
2
2
1
2
2
2
2
2
2
1
2
piece Pallet 280 x 280 x 20
pieces Rail 120 x 20 x 20
pieces Rail 80 x 20 x 20
pieces Rail 40 x 20 x 20
piece Clamping hand 25
pieces Holding down clamp l=60
pieces Receiver pin M6
pieces Stud bolt Ø16 x 30
pieces Slide rail M7
pieces Receiver - M10 x 1 / 24
pieces Receiver - M10 x 1 / 34
piece Supporting plate - M10 x 1 / l=38
pieces Supporting pin - M10 x 1 / l=50
Germany Made
1 piece Ball joint M6 - M10 x 1
1 piece Stop bolt - M10 x 1 / 12 x 12 x 62
2 pieces Prism element 20 x 40 x 45
20 pieces Centering sleeve Ø10
10 pieces Cap screw M6 x 20
10 pieces Cap screw M6 x 25
10 pieces Cap screw M6 x 35
2 pieces Knurled screw M7 x 25
2 pieces Plastic plain washer Ø20 x 2-10
2 pieces Plastic plain washer Ø20 x 4-10
1 piece Tool kit
1 Set Plastic case with storage box
ALUMESS Basic pin support
The pin support is an universal work piece support. If you press the
work piece into the support the easy flexible pins will fit to the work
piece shape. By clamping off the pins the „negative shape“ can be
fixed and enables a reproducible workpiece fixing.
This can easily be fastened onto the connecting bolt or the swivelling
connecting bolt with the connecting plate provided.
L [mm]
B [mm]
H [mm]
Pin Ø [mm]
15
15
52
1.5
35
35
91
5.0
55
55
100
5.0
95
95
142
6.0
Concentricity gages RPG mini
Concentricity gages RPGP
with V-blocks
Max. workpiece
diam.
Roller diam.
0,8-20 mm
38 mm
3-30 mm
30 mm
Type of rollers
cut-in rollers
interlocking
Concentricity
Drive
1-26 mm
precision rolling
bearings
manually
operated
cylindric rollers
Centre-clamping vises MZR
• solid, rigid, strong, powerful
• reversible jaws for large and small workpieces
• best accessibility
• first set-up with grip jaws (raw part machining)
• second set-up with smooth jaw steps (for
finished parts)
• no pre-stamping necessary
• best results with workpieces up to 500 N/mm2
material strength.
Centre-clamping vises MZU
• maximum access
• large clamping width
• high flexibility
• material: modified steel
surface hardened, functional surface precision
grinded
• centering accuracy >I< 0.03 mm
• repetition accuracy 0.01 mm
20
Max. workpiece
diam.
1-26 mm
Width of the
T-slots
Delivery
10 H7
2 V-blocks fixed
10 H7
1 V-block fixed
1 V-block height
adjustable
Drive
manually
operated
Dimension
L x W [mm]
350x160
Centre-clamping vises MZE
• maximum access
• large clamping width
• material: modified steel
surface hardened, functional surface precision
grinded
centering accuracy >I< 0.03 mm
repetition accuracy 0.01 mm
Centre-clamping vises MZC
Depending on customer requirements, two
types are available:
MZC type E
Centering accuracy >|< 0.03 mm
Repetition accuracy 0.01 mm
MZC type S
Centering accuracy >|< 0.01 mm
Repetition accuracy 0.003 mm
Metrology Products
ZHAOSCHNEIDER
2D Image Processing CMM
eco Smart View 200-300 / Easy View 300
MESSTECHNIK
Germany Made
Special Features:
• Table top for measuring small work pieces
• Base and stage made of steel
• Avaiable as manual or CNC driven version
• Standard configuration includes image processing
system and measuring software
Special Features:
• Arm construction
• CNC - controlled automatic driving system
• Fast moving stage
• Easy operation
• Lower prices
• Suitable for small high precision workpieces
Specifications:
Type
Measuring range
eco Smart View 200
eco Smart View 300
Easy View 300
X
mm
200
300
300
Y
mm
100
200
300
Z
mm
100
Stage
100
Metal with 2 T-slots
Stage driving system
Objective
Manual (Standard) / CNC-controlled (option)
CNC-controlled
Manual zoom objective (Standard) / Autozoom objective (option)
Manual zoom lens, telecentic
Magnification
1x - 5x
Image field
mm
6x4.5 - 1.2x0.9
Working distance
mm
83 - 78
1/2” B/W camera, 0.4 Megapixel (Standard) / Auto zoom objective
(Option)
Camera
Transmitted illumination
-
Telecentric, long life LED
Surface illumination
Long life LED, section-wise controllable
Long life LED, section switchable
CNC-control
-
3 axis
Co-axial light
Telecentric, long life LED
-
0.5
0.1
μm
Digital resolution
Max. table load (ca.)
Length measurement uncertainty
kg
1)
(Din EN ISO 10360-2, VDI/VDE 2617)
Machine dimensions
Netto machine weight (ca.)
Power supply
20
MPEExy = ±(2.0+L/100 mm) μm, measuring length L in (mm)
Exy = ±(2.0+L/150 mm) μm,
measuring length L in (mm)
MPEExy = ±(2.8+L/100 mm) μm, measuring length L in (mm)
Exy = ±(2.8+L/150 mm) μm,
measuring length L in (mm)
W
mm
600
740
660
D
mm
500
830
700
H
mm
850
1000
1630
kg
85
100
220-240 VAC, 50-60 Hz, 500 W
Measuring software
1)
200
High precision granite stage
320
220-240 VAC, 50-60 Hz, 1 kW
TOPAS MULTI SOFT
Only valid when using the transmitted loght, admissible ambient condition 20ᵒC ±1K, temperature gradient Δth=0.5ᵒK/H
21
Instection & Testing Product
Durometers
Digital Force Gauges
Holds maximum reading until reset
Accuracy: ±0.2% of Full Scale
Japan Made
Selectable Units (mN, N, gf, kgf, ozf, and lbf)
Model EFG200
Rang : 20 kgF
Resolution : 0.005 kgF
Model : KR 24A
Type : A for Ordinary Rubber
Model EFG500
Rang : 50 kgF
Resolution : 0.01 kgF
Model EFG1000
Rang : 100kgF
Resolution : 0.02kgF
Model : KR-25D
Type : D for Hard Rubber
Shore Digital Durometer
- Accuracy: ≤ ±1 HA/HD
Model : KR-27E
Type : E for Soft Rubber
- Resolution: 0.1HA/HD
- Memory: 500 data
- Power: 3.6VDC 800mAH Ni-MH rechargeable batteries
- Life time: Approximately 30 hours
- Print: Themal Printer (Optional accessories) wireless
printhing
Handy Hardness Tester
Push Pull Force Gauges
SONOHARD SH-21
SP Series
Japan Made
Measuring
Indenter
Diamond indenter for Micro-Vickers (facing-to-surface
angle of 136 deg)
Measuring load
Approx 1kgf (roughly 10N)
Approx 2kgf (roughly 20N)
Approx 4kgf (roughly 40N)
(These loads indicate those in typical applications. As
the specification varies according to the object to be
measured, please contact us for details.)
Measuring range
Reproducibility
Sensor Inside
S Type Sensor Outside
Cycle Type Sensor Outside
- High accuracy and high resolution.
- TFT colorful screen, peak/real-time value/test curve display at the same time,
Rockwell hardness: HRC10.0 to HRC70.0
Vickers hardness: HV100 to HV999
Shore hardness: HS20.0 to HS99.9
Brinell hardness: HB85 to HB550
monitor and review test procedure.
HRC: ± 1.0HRC , HV: ± (3%rdg)HV , HS: ± 1.0HS,
HB: ± (3%rdg)HB
details view, user-defined printing format.
- Select unit: N/kgf/Ibf/ozf.
- USB output, connection to software, infinite data storage/ transmission, curve
- Auto-off design without operation.
USA Made
USA Made
22
Coating Thickness Gages
For Metal and Non-Metal Substrates
Surface Profile Gages
PosiTector SPG - PosiTector RTR
Environmental Gages
PosiTector DPM Dew Point Meter
Wall Thickness Gauges
PosiTector UTG Ultrasonic Thickness
Gage
Instection & Testing Product
Brinell Opical Measurement System
Ultrasonic Hardness Tester
BMS-100
MVT-100
HP-2K
Probe Type
Loading force
20 N
Diameter
22 mm
Length
154 mm
Oscillating Rod
Diameter
2.4 mm
Roughness
of measuring
surface
Price : 149,000.-
Features:
● Stylish appearance, portable and high definition USB camera, optimized ergonomic
design, comfortable hand feeling.
● Convenient operation, click auto-measuring button after finding the indentation,
it will simultaneously display the indentation diameter and Brinell hardness value
and do data record.
● Measurement accuracy of diameter can reach 0.001mm, totally conform ASTM
E-10,GBT 231,ISO_6506 and other standards.
● Available to setup tolerance (upper limit& lower limit)
● Available to realize hardness conversion according to ASTM_E140, DIN 50150,
GBT_1172, etc.
● Available to setup auto-save image and corresponding measuring result files,
generating reports.
● Available to setup and auto-save date, hardness parameters, hardness value, and
storage location of images.
● For image files and data files, opening, saving, printing, modification, invoking
can be carried out.
● Real-time statistics measuring data, display Max, Min, Ave, deviation, CP, CK,
etc.
Price : 129,000.-
Ra<5 μm
Min weight of test
material
0.3 kg
Min thickness of
test material
2 mm
Measuring Rang
HV:50-999; HRC:20-70; HB:85-650
Accuracy
HV:±3%HV; HRC:±1.5HRC;
HLD:±3%HLD
Measuring Direction
Support 360°
Data Storage
To save 1000-groups of measuring data and
20-groups of calibration data
Hardness Scale
HV, HB, HRC
Data display
Loading force, Testing-times, Testing result, Average,
Maximum, Minimum, Deviation and Conversion scale
Hardness Indication
LCD display
Recharger Voltage
AC220V/50Hz, 110V/60Hz
Instrument Dimensions
160x80x31mm
HB:±3%HB;
Free PC or Notebook
Metallographic Cut-off Saws
C 250 B / C 250 S
Italy Made
Model
C 250 B
Dia. Cutting wheel
80 mm
Motor Power
2.2 KW
Motor
Autobreaking
Speed (RPM)
3000
Power supply
380/400V – 50Hz - Triphase
Safety limit micro switch
Yes
Left Rubber sealed side port
Yes
Illuminated cutting chamber
Option
Yes
Coolant re-circulating system
Yes
Cleaning system
Yes
Bases for vices
EP16
Price: 335,000.-
1
2
Steel frame - stainless
steel screws
Yes
Cover
Mould dimensions
Elettronics
Cycle time
Price: 195,500.-
C250S
250 mm
Cut samples up to
Mounting Press
C250B
C 250 S
Price: 399,000.-
Metallographic Polisher
MP22V
Resin reinforced
shockproof /
corrosion Steel
25-30-31,8-38,
2-40 mm
Thermoregulator
Yes
Closure Mould
Screw
Cooling system
Connect to water
source
Piston driven by
Pneumatic system
(6 bar pressure)
• Corrosion, heat and impact resistant moulded cover.
• Solid steel chassis and stainless steel bolts and screws.
• Control panel with start button and adjustable tap for water flow.
• Removable working wheel 200/230/250/300 mm diameter (not included).
• Cover and splash ring.
• Working wheel rotates.
Price: 167,500.• Adjustable water dispenser.
• Cover and splash ring.
23
Instection & Testing Product
Digital Micro Hardness Tester
HVD-1000MP/HVD-1000AP
Multi-function Digital Macro
Vickers Hardness Tester
HVD-5MP/HVD-5AP
Hardness scale: HV0.01, HV0.025, HV0.05,
Hardness scale: HV0.2, HV0.5, HV1, HV2,
HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2
HV3, HV5
Conversion Scale: HRA, HRB, HRC, HRD, HK,
Conversion scale: HRA, HRB, HRC, HRD, HK,
HBS, H15N, H30N, H45N, H15T, H30T, H45T
HBS, H15N, H30N, H45N, H15T, H30T, H45T
Testing force: 10g-1kg
Testing Force: 200g, 50Kg
Min. measuring unit: 0.01μm
Loading speed: ≤50μm/sec
Hardness value range: 1-4000HV
Min. Measuring Unit: 0.02μm
Total magnification: 100x, 400x
Hardness Value Range: 1HV-4000HV
Loading method: Automatically
Total Magnification: 100x, 200x
Data Output: Built-in Printer, RS-232 interface
Loading Method: Automatically
Brinell Hardness Tester
Multi-funtion Hardness Tester
HBE-3000M
HBRVE-187.5
Brinell scale: HBW2.5/62.5, HBW2.5/187.5,
Rockwell scale: HRA, HRB, HRC, HRD, HRE, HRF,
BW5/125, HBW5/750, HBW10/100, HBW10/250,
HRG, HRH, HRK, HRL, HRM, HRR
HBW10/500, HBW10/1000, HBW10/1500,
Brinell scale: HBW2.5/31.25, HBW2.5/62.5,
HBW10/3000
HBW5/62.5, HBW2.5/187.5
Testing force: 62.5kg-3000kg
Vickers scale: HV30, HV60,HV100
Min. measuring unit: 0.005mm
Testing force: 30g-187.5kg
Hardness range: 8-650HBW
Initial test force: 10Kg(98.0N)
Hardness value read: Check table
Resolution ratio: 0.5HR
Total amplification: 20X
Loading method: Automatically
Loading method: Automatically
Specimen depth allowed: 130mm
Multi-funtion Hardness Tester
HRR-150DT
Multi-function Digital
Rockwell Hard ness Tester
HRS-150D
Rockwell scale: HRA, HRB, HRC, HRD, HRE,
HRF, HRG, HRH, HRK, HRL, HRM, HRR, HR15N,
Rockwell scale: HRA, HRB, HRC, HRD, HRE, HRF,
HR30N, HR45N, HR15T, HR30T, HR45T
HRG, HRH, HRK, HRL, HRM, HRR
Conversion scale: Conversion table
Conversion scale: HRA, HRB, HRC, HRD, HRF, HV,
Preliminary test force: 10Kg, 3Kg
HK, HBW, H15N, H30N, H45N, H15T, H30T, H45T
Total test force: 15Kg-150Kg
Preliminary test force: 10Kg
Resolution ratio: 0.5HR
Total test force: 60Kg, 100Kg, 150Kg
Loading method: Automatically
Hardness value range: HRA:20-88, HRB:20-100,
Hardness value range: HRA:20-88, HRB:20-
HRC:20-70
100, HRC:20-70, HR15N:70-91, HR30N:42-80,
Loading method: Automatically
HR45N:20-70, HR15T:73-93, HR30T:43-82,
Data output: Built-in printer and RS-232 port
HR45T:12-72
Rockwell Hardness Tester
Universal Testing Machine
HR-150DT
JVJ-50S/JVJ-50P
Max. Load: 2000N
Load resolution: 1/10000
Rockwell scale: HRA, HRB, HRC, HRD, HRE,
HRF, HRG, HRH, HRK, HRL, HRM, HRR
Conversion scale: Conversion table
Preliminary test force: 10Kg
Load accuracy: ≤0.5%
Load amplification: 7 segment auto switch
Disp. resolution: 1/1000
Disp. accuracy: ≤0.5%
Total test force: 60g-150kg
Metal stretch meter resolution: 1/1000
Resolution: 0.5HR
Metal stretch meter accuracy: ≤0.5%
Hardness value range: HRA:20-88, HRB:20-100
Large deformation stretch meter accuracy: ±0.5mm
HRC:20-70
Speed range: 1-500mm/min
Loading method: Automatically
Effective space: 800mm
Dwell time: 1-60s
Load cell: Imported
Capacity section: 7 section
Dynamical system: Servo motor
24
Instection & Testing Product
Polishing Machine
Polishing Machine
MP-1B / MP-2B
BG-30 / BG-32
Cutting Machine
Iqiege® -1 Manual & Automatic
MP-1B
BG-30
MP-2B
BG-32
Technical data
Technical data
MP-1B
Polishing disc
diameter
MP-2B
Ф203mm
Speed
Technical data
Center distance
Sand belt
AC220V 50Hz
Grinding/poshing
disc number
Motor
1
Belt number
2
Price
255 mm
250W
550W
740x400x310
725x710x310
75,900.-
105,000.-
Cutting Machine
Q-80Z / 100B Manual & Automatic
ok
Width 100mm length 920mm
1
2
Input voltage
380V/50Hz/three phase
Input power
3.3KW
Spindle rotation
2200RPM
Max cutting diameter
Ф100mm
Max moving table Travel
300mm
Speed
1400RPM
Cutting wheel size
Ф350x2.5x32 mm
Surface speed
768m/min
Dimension (mm)
900x860x620 mm
Motor
Dimention (mm)
BG-32
Cooling device
50-1000r/min
Operating voltage
BG-30
Iqiege® -1
Dimention (mm)
Price
550W
550W
550x570x320
620x570x320
85,500.-
110,000.-
Working table size
Optional
Price
330x280 mm
Cabinet, sliding table
359,000.-
Cutting Machine
Cutting Machine
DTQ® -5
Q-2 / Q-2A
Q-2
Technical data
MP-80Z
Power supply
Three phase 380V 50Hz
MP-100B
Cutting dis speed
2100RPM
Cutting disc spec.
Ф350x2.5x32 mm
Max cutting diameter
Ф80mm
Ф100mm
Max moving Travel
125 mm
Max working table
Travel
275 mm
Input
Feed speed
Working table size
Price
Q-2A
2.5KW
3.3KW
1-10 mm/min
310x280 mm
225,000.-
257,000.-
Technical data
Input voltage
Q-2
Q-2 A
380V/50Hz/Three phase
Input power
1.1KW
2.2KW
Max cutting
diameter
30x30 mm
55x55 mm
Cutting wheel size
(mm)
Ф250x2x32
Ф300x2x32
Option accessories
• Vertical clamp
Spindle speed
• Transverse workbench
Dimention (mm)
Price
2800 r/min
650x450x400
650x500x400
43,500.-
59,000.-
Technical data
Travel
Positioning accuracy
DTQ® -5
25 mm
0.01 mm
Spindel speed
10-600 r/min
Blade diameter
Ф100x0.5x20 mm
Power
80W
Voltage
220V / 110V
Dimension (mm)
Price
350x305x205 mm
189,000.25
Instection & Testing Product
DIGITAL Hardness Testers
Italy Made
Ergotest DIGI Digi 25 R / Digi 25 RS
MODEL
ERGOTEST
DIGI 25 R
ERGOTEST
DIGI 25 RS
For standard Rockwell tests with loads
kgf
150-100-60
For superficial Rockwell tests with loads
kgf
Non applicable
45-30-15
For Brinell indentations with loads*
kgf
250-187,5 100-62,5
100-30
For Vickers indentations with loads*
kgf
100-60
Automatic conversion of the values measured in the various hardness
scales: Rockwell, Brinell, Knoop, Vickers as well as tensile strength
according to either “Galileo conversion tables”, ISO 18265 or ASTM
E140 standards
Standard
“Go-no go” function
Automatic test cycle with electronic process control
Load dwelling time 1-99s selectable by keyboard
Maximum height of the workpiece
mm
295
Throat depth
mm
220
Automatic pre-load selection
kgf
10 (Standard)
3 (Superficial)
10
Self diagnosis program
USB port
Standard
LAN connection
Load selection by knob
Overall dimensions (approx)
Width
Depth
Height
mm
mm
mm
230
615
930
Net weight
kg
150
Universal Hardness Testing Machines
KB 250 - 3000 BVRZ Video
Semi and fully automatic machine
• Operation via the hardness testing software KB HardwinXL
Video, SA or FA
• 5 Megapixel USB camera
• High load step range
• KB 7x optical zoom in 10 zoom steps
• Intuitive operation via Windows-PC panel
• LED-Lighting
• Export into Excel or text file
• Customer-specific test protocol creation
• Network compatible
• Equipment variants from single measurements to fully
automatic machines
• Subsequent upgrade to fully automatic system possible,
e.g. for the automatic evaluation of the materials testing
KB 250 - 3000 BV+R Video
• Operation via the hardness testing software KB HardwinXL
• 5 Megapixel USB camera
• High load stage range
• KB 4x digital zoom
• Intuitive operation via Windows-PC panel
• LED lighting
• Export into Excel or text file
• Customer-specific test protocol creation
• Network compatible
• Equipment variants from individual tests to fully automatic machines
• Subsequent upgrade to fully automatic system possible,
e.g. for the automatic evaluation of the materials testing
26
KB
KB 250 - 3000 BVRZ Standalone
Swiss Made
For reliable materials testing
• High load step range
• KB optical zoom, integrated 1:7 magnification with
only one objective
• Intuitive operation
• LED-lighting
• Magnetic indenter holder
• Automatic evaluation (optional)
Vickers Testing machines
Micro Macro Vickers Hardness tester KBW 1-V - 50-V
Stand alone, Video, Semi-automatic, Fully automatic
• Digital Vickers hardness tester
• LED lighting unit for the measurement microscope
• Application of test load using weights
• Equipment variants from simple test equipment with indentation measurement
via ocular, right up to fully automatic hardness testing systems, controlled via the
hardness testing software KB Hardwin XL.
KBW 1-10-V Standalone
KBW 1-10-V Video, SA, FA
Instection & Testing Product
Automatic Hardness Testers
THV & TELS
Swiss Made
Working principle:
Loads:
MOD DR: RockwellMOD DR: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588,
613, 981, 1226, 1471, 1839)
MOD DSR: Superficial Rockwell
MOD DSR: 10kgf, 15kgf, 15.625kgf, 30kgf, 31.25kgf, 45kgf (N 98,
Preload:147, 153, 294, 306, 441)
MOD DR: 10kgf (98.1N)
MOD DSR: 3kgfStandard scales:
MOD DR: HRC, HRD, HRE, HRF, HRG, HRH, HRK, Brinell HB30
plus other scales on request
Load application method: automatic
MOD DSR: HR15N, HR30N, HR45N, HR15T, HR30T, HR45T,
HR15W, HR30W, HR45W, HR15X plus other scales on request
Storage: 400 files of 2500 tests each
Minimum measurable diameter:
4mm (with optional 60° indenter and shroud - P/N Penetratore 048 + Gruppo 022)
Output interfaces:
USB Printer - export on USB pendrive OPTIONAL br>RS232 RS485 - Profibus - Ethernet Bluetooth
Selectable functions: hardness scale - load time - minimum thicknes - mm/inch - round correction - calibration - language date/time - tolerances - indenter - file - print - statistics - icons - conversion - sequence - measures archive - pwd - start test
Bench Hardness Testers
AT130D
Working principle:
Loads:
MOD DR: Rockwell MOD DSR: Superficial Rockwell
MOD DR: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588, 613, 981, 1226, 1471, 1839)
MOD DSR: 10kgf, 15kgf, 15.6kgf, 30kgf, 31.2kgf, 45kgf (N 98, 147, 153, 294, 306, 441)
Preload:
MOD DR: 10kgf (98.1N) MOD DSR: 3kgfStandard scales:
MOD DR: HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, other scales on request
Output interfaces: RS232MOD DSR: HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HR15W, HR30W, HR45W, HR15X plus other scales on request
Minimum measurable diameter: 4mm
Load application method:
manual with automatic pre load application
Selectable functions: scales, tolerances, calibration
Bench Hardness Testers
NR3D
Working principle:
Loads:
MOD DR: Rockwell MOD DSR: Superficial Rockwell
MOD DR: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588, 613,981, 1226, 1471, 1839)
MOD DSR: 10kgf, 15kgf, 15.6kgf, 30kgf, 31.2kgf, 45kgf (N 98, 147, 153, 294, 306, 441)
Preload:
MOD DR: 10kgf (98.1N) MOD DSR: 3kgfStandard scales:
MOD DR: HHRC, HRD, HRE, HRF, HRG, HRH, HRK, Brinell HB30 plus other scales on request
Load application method: manual with automatic pre load applicationMOD DSR: HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HR15W, HR30W, HR45W, HR15X plus other scales on request
Portable Hardness Testers
Computest SCX
Working principle: RockwellLoads: 5kgf (49N)
Preload: 1,2kgf (11,8N)Standard scales:
HRC (0-70) - HRB (0-120) - HB30 (80-700) - N/mm² (260-2300) Load application method: manual kg/mm² (27-235) - HV (35-1080) - DPTH (0-100)
Output interfaces: RS232, USBmicro
Selectable functions:
scales, tolerances, calibration, test load, stats, language, display Storage: contarst, seq., RS232, USB, files, materials, partial average. up to 1000 values memorizable in 8 different files
clock, auto off timer, prints
Minimum measurable diameter: 2mm with stand N - 3mm with stand T - 35mm by hand
Portable Hardness Testers
Handy Esatest X
Working principle: Loads:
ESATEST PAT ERNST
Continuous progressive load application with acquisition of load
testing through electrical resistance
values and electrical resistance in realtime from 1kgf to 10kgf (
9.81N to 98.1N)
Standard scales:
HV, HRC, HRB, HRA, Brinell HB30 ZNmm², HRF
Selectable functions:
scales, tolerances, calibration, test load, stats, language, display Load application method: manual
contarst, seq., RS232, USB, files, materials, partial average.
clock, auto off timer, prints
Output interfaces: RS232, USBmicro
Storage: up to 1000 values memorizable in 8 different files
Minimum measurable diameter: 5 mm - it is possible to execute tests in small cavities with the use of special penetrators
Optical Readers
e●Brio²
Standard scales:
HB 30 HB 10 HB 5 HB 2.5 - Brinell loads: 3000-
1000-750-500-250-187.5-125-62.5-31.2-15.6 kgf
Reading:
Automatic / Camera resolution 752 X 480 pixel /
Reading resolution 0.001 mm
Minimum measurable diameter: 0.7 - 5mm
Selectable functions:
Brinell indentation readings, histogram of the tests, statistics, print
out of the test report
Working area dimensions: base: 30 mm diameter
27
Instection & Testing Product
Phased Array Ultrasonic Flaw Detector
SUPOR
Superior Features
● Grouping Scanning: It can be divided into up to six groups for one PAUT probe for different inspections.
● Support two PAUT probes working simultaneously with grouping function.
● Modular design: Phased array module (16/32 channels), Phased array + TOFD module, Multi-channel TOFD
module or conventional UT module…
● Simultaneous Inspection of PA & TOFD
● TKY software (Optional)
● Velocity, Sensitivity, Delay, TCG calibration
● Weld simulation
● Scan setup wizard
● Real time A/B/C/D scan
● 8.4” touch screen LCD
with resolution 800×600 pixels
Digital Ultrasonic Flaw Detector
CTS-9009 / CTS-9009PLUS
Superior Features
● Max. sampling rate 240MHz; Measurement resolution 0.1mm.
● Featured with AWS D1.1/D1.5 and API 5UE evaluation standards.
● The gate magnifier function magnifies the echo area within the gate to the whole screen display.
● Ethernet communication: Achieving real-time communication with a PC and remote control.
● The convenient and useful probe echo frequency measure function enables the users to know the probe center
frequency quickly, resulting in more precise flaw detection evaluation.
● Operating frequency range: 0.5~15MHz, highlighting advantages of high sensitivity and broadband.
● 20 ~2000Hz PRF with 10 steps adjustable: avoid reverberation signals during flaw detection.
● Measure crack height by edge peak echo method.
● RF (Radio Frequency) echo display: good to thin-wall material measurement, academic research or qualitative
analysis.
● The AGC (auto gain control) function, together with peak echo and image freeze function, help quickly identify the
flaw highest echo, enabling efficient flaw detection.
● The DAC curve works with echo compare function, making echo quantification of different distances and
amplitudes more convenient.
● Three different color schemes can meet the requirements of different application environments and habits.
● Up to 500 sets of curve and waveform can be saved for various workpieces and flaw detection standards.
● Support up to 9 kinds of language.
● Thickness measurement function available.
Ultrasonic Thickness Gauges
CTS-30A
Features:
● Mono LCD (with backlight), 128×64 pixels
● Measurement range: 0.8mm-300mm (steel); Measurement accuracy:0.01mm/0.1mm
● Various measurement modes available: Minimum measurement value capture, average measurement value, setup
limit measurement value, difference measurement value, etc
● Input the known thickness and the system may show the velocity of the inspected workpiece in real time.
● When out of operation for a while, the system will power off automatically.
● When the battery power is low, the screen will prompt.
● Up to 5000 sets of thickness measurement data (refers to measurement value and acoustic value) and 100 sets of
parameter data (refer to measurement values and system setup, etc) can be saved.
● System internal data can be saved to a USB disk.
● Compact size, light weight, low consumption, long operation period
Ultrasonic Thickness Gauges
CTS-49
Features:
● Measurement range: 0.5~600 mm.
● Compact size and weight only 0.6Kg Inc Battery.
● 5” High resolution color TFT-LCD monitor with high-brightness LED backlight (visible in sunshine), 800x480 pixels.
● Auto search function can automatically adjust the display range and the gain based on the detected echo.
● Standard (R-B1 transmission pulse to the first echo), through coating measurement (B1-B2 or Bm-Bn) and coating
measurement fuctions available.
● A scan and B scan fuctions available.
● Up to 6 language including English/French/Germany/Spanish/Portugues/Chinese for selection.
● Multi-probes compatible for selection
28
Instection & Testing Product
High Resolution Spectrophotometer
sph900
Germany Made
Overview of the advantages:
• Combi-device with two geometries according to DIN5033: 45°/0° AND d/8°
• Spectral colour measurement of: plastics, paints, paper, textiles, liquids, granules, powder…
• Perfectly simple handling
• Probe head only 25 mm diameter - therefore ideally suited for measuring small and curved parts
• Highest repeatability < 0,04 DE (typical 0,02)
• High contrast O-LED colour display
• Bluetooth and USB V.2
• Great price-performance ratio
Applications:
• Colour measurement and registration of goods intake and goods output according to DIN EN
ISO 9000 standard
• Objective quality control of colours within a production
• Colour difference measurement to reference colours stored on the device
ColorDatra PC database software
for quality control tasks
Powerder Measurement
d/8° Messkopf Adapter
High Resolution Spectrophotometer
sph870
Features:
• Flexible external probe head and a small spot size (3.5 mm Ø) for reliable scans on curved
surfaces and small samples
• A comprehensive range of accessories and probe head adapters enables the use for a wide
range of applications
• Two main geometries (45°/0° and d/8°) avaliable in one device, with the optional accessory
MA35-UK
• The automatic accessory detection changes internal settings depending on what accessory is
attached
• Very easy 4-button operation and high resolution graphic display
• High quality „Made in Germany“
Measuring set
inhomogeneous samples
Probe head with v-block
for cylindrical samples
sph870 with measuring head MA35
29
Instection & Testing Product
Motorized Test Stand w/PC Control
Software
ESM303
MESUR™gauge
U.S.A. Made
Manual Force Test Stand
ES30
• Inputs data from a force or torque gauge and travel display to a PC for further analysis,
at up to 50 Hz
• Real time tabular and graphical data displaying load vs. time or load vs. distance
• Configurable start and stop test triggers (time, load, number of samples, or distance)
• Statistical calculations (minimum, maximum, average, area under curve)
• Graph manipulation tools, including zooming, scaling, panning, titles, and more
• One-button export to Excel
• Create customizable reports and report templates
• Save and recall test setups and test data
• Configure Mark-10 instruments easily through a simple interface
• View real time data on a large simulated instrument display
Application:
Application:
Load capacity:
< 24 in [610 mm]/min:
> 24 in [610 mm]/min:
300 lbF [1.5 kN]
200 lbF [1 kN]
Speed range:
Standard:
Optional:
0.5 - 13 in/min [13 - 330 mm/min]
0.02 - 45 in/min [0.5 - 1,100 mm/min]
Maximum travel:
18.0 in [457 mm]
Speed setting accuracy:
±0.2%
Speed variation with load:
±0% [Stepper motor driven]
Travel accuracy:
±0.002 in per 10 in [±0.05 mm per 250 mm]
Travel resolution:
0.001 in [0.02 mm]
Limit switch repeatability:
±0.001 in [0.03 mm]
Power:
Universal input 80-240 VAC, 50/60 Hz
Weight:
56.5 lb [25.6 kg]
Load capacity:
200 lbF [1,000 N]
Loading method:
Side-mounted hand wheel
Maximum travel:
13 in [330 mm]
Travel Rate:
0.05 in [1.27 mm] per rev.
Included accessories:
Extension rod, small hook, medium hook, #10-32
coupler, compression plate, force gauge mounting
hardware
Optional Equipment:
Digital travel display
ESM001
6 in [150 mm] travel, 0.0005 in [0.01 mm] resolution
(150 mm x 0.01), 0.001 in [0.03 mm] accuracy, SPC
output for automated data collection.
Digital travel display
ESM004
12 in [300 mm] travel, 0.0005 in [0.01 mm] resolution
(300 mm x 0.01), 0.001 in [0.03 mm] accuracy, SPC
output for automated data collection.
Column extensions
Available in 6 in, 12 in, and 24 in, and custom lengths
Wire Crimp Pull Testers
Model WT3-201 Manual Wire Crimp
Pull Tester
- Measures wire crimp pull-off force to
200 lbF (1,000 N)
- USB, RS-232, Mitutoyo, analog, set
point outputs
- 1,000-point data memory and
statistics
- Auto output / data storage / zero upon
sample break
Model WT3-201M Motorized Wire
Crimp Pull Tester
- Configurable test speed
- Auto-start and reverse at break
- 2,000-point data memory with time
stamp and statistics
- Auto output / data storage / zero /
reverse upon sample break
Digital Torque Gauges & Torque Testers
Series TT01 Cap Torque
Testers
- USB, RS-232, Mitutoyo,
analog, set point outputs
- 1,000 point data memory
and statistics
- Auto output / data storage /
zero upon bottle cap removal
- ±0.3% accuracy
- Capacities from 12 to 100
lbFin
Series TT02 Torque Tool Testers
- Calculates first and second peaks
- 1,000 point data memory and
statistics
- USB, RS-232 Mitutoyo, analog,
set point outputs
- Auto output / data storage / zero
upon bottle cap removal
- ±0.3% accuracy
- Capacities from 12 to 100 lbFin
Series TT03 Torque
Gauges
- Dedicated remote torque
sensor with Jacobs chuck
- Compact size
- Break detection
- USB output
- ±0.5% accuracy
- Capacities from 10 ozFin
to 100 lbFin
Digital Force Gauges
Series 2 Force
Gauges
- 500 Hz sampling
rate
- Ultra-compact form
factor
- ±0.5% accuracy
- Reversible housing
and display
30
Series 3 Force Gauges
- 2,000 Hz sampling rate
- Ultra-compact form
factor
- USB output
- ±0.3% accuracy
- Reversible housing and
display
Series 4 Force Gauges
- 3,000 Hz sampling rate
- USB, RS-232, Mitutoyo,
and analog outputs
- ±0.2% accuracy
- 50 point data memory
and statistics
- Reversible housing and
display
Series 5 Force Gauges
- 7,000 Hz sampling rate
- USB, RS-232, Mitutoyo,
and analog outputs
- ±0.1% accuracy
- 1,000 point data memory
and statistics
- Capacities to 2,000 lbF
(10 kN)
Instection & Testing Product
Ultra-Efficient Hand-Held Stroboscopes for precision measurements
RT STROBE qbLED & super qb LED
Germany Made
qbLED
Number of LEDs
super qbLED
40
118
30 - 300,000 flashes per minute
Frequency range
Display
LCD, multiline
Accuracy
±0.02 % (±1 digit / ±0.025 μs)
Resolution
± 0.1 (30.0 ... 999.9 FPM)
± 1 (1,000 ... 9,999 FPM)
± 10 (10,000 ... 300,000 FPM)
External trigger input
3 - 30 V / max. 5 mA (isolated optocoupler)
DIN 41524 5-pin standard connector
Uout = 24 VDC, 60 mA
Certifications
EMV / EMC 2004/108/EG; 2006/95 EG;
DIN EN 61010-1:2011;DIN EN 62471:2009; CE;
DIN EN 60825-1:2008 (Version super qbLED)
qbLED
Light duration
Light intensity
approx. 1,750 Lux @ 1° / 300 mm
(12 inch)
approx. 5,000 - 8,000 K
Power supply
Integrated lithium-ion batteries
approx. 7:00 h
@ 0.500° (~875 Lux),
approx. 4:00 h @
2,000 Lux (1,140°)
Material
Weight
approx. 2:30 h
@ 0.500° (~4,000 Lux),
approx. 5:00 h @
2,000 Lux (0,250°)
Aluminium
Dimensions
150 x 130 x 112 mm / 6.0 x 5.1 x 4.4 inch
approx. 1,050 g
approx. 1,150 g
Mechanical hand-tachometer
Portable stroboscopes
HTM
RT STROBE pocketLED
Technical data:
Technical data:
Measuring range: Measuring range:
Measuring range:
Measuring accuracy:
Material:
approx. 8,000 Lux @ 1° / 300 mm
(12 inch)
Flash colour
Continuous use time
super qbLED
Adjustable
10 ... 50,000 RPM
1 ... 5,000 m/min
5 ... 25,000 ft/min
±0.5 % of measuring range full scale value
ABS plastic
Frequency range:
Light intensity max.:
Degree of protection:
Flash duration:
Material:
30 ... 300,000 FPM
4,800 LUX @ 6,000 FPM / 30 cm
IP65
adjustable
Aluminium / ABS, heavy duty design
Stationary stroboscopes LED
Digital hand-tachometers
RT STROBE 3000/5000/7000/10000 LED
Redpoint / Rotaro
Features:
Technical data:
• Frequency: 0 … 120,000 FPM (flashes
per minute)
• Light intensity up to 14,000 LUX @ 30 cm
• Light intensity and sharpness adjustable
• Low-wear technology with LED
• Homogeneous, large illumination
surface
• Series connection
• Various sizes
Accuracy: ±0.02 % of measuring range ± 1 Digit for rpm
Measuring ranges rpm: optical 1 … 99,999 min-1
mechanical 1 … 19,999 min-1
Length: 0 … 99,999 m / 0 … 99,999 ft / 0 … 99,999 in
Sensing distance (optical): max. 600 mm (24 in)
31
Instection & Testing Product
Leak Tester
CETATEST XS
Germany Made
Operating principle
The CETATEST XS is a compact, cost-effective and fully automatic working leak tester for the detection of leaking parts within the cycle
time of the production process. The leak tester uses a gauge pressure sensor for the measurement of the pressure decay caused by the
leakage in the test part (relative pressure method).
Operating method
One-channel operation
Signal processing
24-Bit-A/D-Converter
Valve types
Multi-function block
Sensors
Relative pressure sensor
Measurement ranges
± 2,500 Pa; ± 9,999 Pa / ± 25.0 hPa; ± 99.9 hPa depending on the fill pressure
Result units
Pa, hPa (pressure decay)
bar (test pressure)
Available fill pressure
ranges
Internal electronically regulated: 0.010 - 0.200 bar; 0.020 - 1.000 bar; 0.20 - 8.00 bar
External fill pressure regulation as option
Test modes
Pressure decay measurement
Further test phases
Smooth filling (pressure ramp), prefilling, preventing
Programmable test phases
Application-specific configuration
Test mode specific limits
Fill pressure, test part specific reject and rework levels
Handling
Digital I/O or by PC software, remote control (optional)
Parameter Memory
8 test programs, parameterising via CETA PC software
Languages PC software
German, English, Spanish, French, Turkish, Hungarian, Vietnamese, Czech
Result memory
For the last 20,000 results
Metals Analyzer
M5000
Features:
• High performance and affordable
• Compact designed desktop unit
• Energy saving, standby power 100VA, no vacuum pump
• Full wavelength coverage ,customized factory calibration, adding new element without further
hardware configuration
• Wavelength range 140-680 nm, capacity to analyze more elements required
• Dual optical system design ,optimized performance for analysis of C,P,S and N
• Spectrometer temperature control ensuring high precision and stability
• Programmable digitized spark source, generating optimized discharge waveform for different bases
• Advanced excitation protection and diagnostic system ensuring operating safety
• Argon purge control protecting entrance lens from contaminating, minimizing maintenance
• Professional and simplified operating software, easy to use
• Intelligent data capture, improved accuracy by reducing background interference
• Global factory calibration with interference correction
• Customized QC function and Grade Identification
32
Head office : 261 Soi On-Nuch 17 yak 16, Sukhumvit 77 Rd., Suanluang, Bangkok 10250
Tel. : +66 (0) 2717 7199
Fax. : 66 (0) 2300 2272
Branch office : 271/21 Moo. 8, Borwin, A. Sriracha Chonburi 20230 Thailand
Tel. : +66 (0) 38 345 755-6 Fax. : +66 (0) 38 345 757
E-mail : sales@maxvalue.co.th www.maxvalue.co.th
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising