User manual | Connectors FDNP-P1204G

This busstop® station takes in up to twelve discrete three-wire inputs or
six discrete four-wire input points per node. There are two dual output
connectors.
“T” Type
Aux Power
4 Aux Powered
Outputs
“2G” Type
(C0, C4)
12 DeviceNet
Powered Inputs
“2P” Type
(C1-C3, C5-C7)
There are two inputs per connector-one on pin four and one on pin two.
Each input connector produces four bits of data- two input state bits,
one short-circuit status bit and one open-circuit status bit. The state bit
C5 is set when the discrete input device closes. The LED at each input
point turns green when the input is one. Each input pair is monitored
for short-circuits and open-circuits. Open-circuit detection can be
C6 enabled for each input pair using a software configuration tool. The
status bits automatically reset when the fault is removed.
C4
C0
C1
C2
C3
C7
There are two outputs per connector-one on pin four and one on pin
two. Each output connector consumes two output control bits and
produces two output status bits-one control bit and one status bit for
each output. The LED at each output point turns green when the
output is on. Each output pair is monitored for short-circuits and opencircuits.
Slave Address (0-99)
1
0
9
2 3
8 7
x10
4
5
6
1
0
9
2
8
3
7
4
5
6
x1
DeviceNet
The node address and communication rate can be set using the rotary
switches located under the device cover or through software node
commissioning. The unit automatically detects the communication rate.
The FDNP-P1204G-TT supports explicit messaging, poll, change of
state, and cyclic I/O messages. These connections are established
through UCMM or predefined master/slave connection set.
FDNP-P1204G-TT
• Advanced DeviceNet™ Station
• 6 x 2 discrete inputs and 2 x 2 discrete
Dimensions
outputs
220.0 mm
(8.66 in)
Applications
• For wet or dry environments
• For use with twelve three-wire or six four-
42.0 mm
(1.65 in)
wire proximity and photoelectric sensors,
and four discrete actuators
Features
• PNP short-circuit protected
inputs with open-circuit protection
• 0.5amp short-circuit protected outputs
• Glass filled nylon with nickel plated brass
•
210.0 mm
(8.27 in)
5.3mm
(.209in)
40.3 mm
(1.59 in)
connectors
Rotary Address Switches
27.0 mm
(1.06 in)
13.0 mm
(0.51 in)
Connectors
DeviceNet
Style: 5-Pin minifast®
1 = Shield
2=V+
3=V4 = CAN_H
5 = CAN_L
Cordset: Bus Line use RSM RKM 579- *M
3
4
5
2
2
1
1
Male
Tee : Bus Line use RSM 2RKM 57
3
4
5
Female
Through Bus
InterlinkBT™ 3000 Campus Drive Minneapolis, MN 55441 Phone: (763) 694-2300
10240143
Rev. 2.0
11/01
1
Connectors
Type “2P”
1= V +(A)
2 = Input B
3=V4 = Input A
5 = V +(B)
Style: 5-Pin eurofast
Cordset: Sensor with 2 Signals use
RK 4.4T-*-RS 4.4T
3 (-) BU
4 ( ) BK
1 (+) BN
2 ( ) WH
5
Splitter: Splitter and 2 Sensors
use VBRS 4.5-2RK 4T-*/*/S818
Sensor with 2 Signals
Type “2G”
3 (-) BU
4 ( ) BK
1 (+) BN
INPUT A
5 (+) GY
2 ( ) WH
3 (-) BU
INPUT B
Splitter and 2 Sensors
1 = N/C
2 = Output B (odd numbers)
3 = GND
4 = Output A (even numbers)
5 = PE
Style: 5-Pin eurofast
Cordset: Dual Ouput use RK 4.4T-*-RS 4.4T
3 (-) BU
4 ( ) BK
Output A
2 ( ) WH
3 (-) BU
Splitter: Dual Output or Dual Valve use
VB2-RS 4.5T-*/2VAS 22-A528-*/*(“A”Style valve plug, other’s available)
Output B
Dual Output
Field Wireable: Dual Output use BS 8141-0
Type “T”
1= Aux +
2= E+
3= E4= Aux-
Style: 4-Pin minifast®
Cordset: Aux Power use
RSM RKM 46- *M
1
3
3
1
2
4
4
2
Male
Female
Auxiliary Power
Tee : Aux Power use RSM 2RKM 40
I/O Data Mapping
Item Number/EDS File: F0062/I0062_xx.eds
Product Code: 7/993 (3E1 hex)
Input
Data
Output
Data
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
0
I-7
I-6
I-5
I-4
I-3
I-2
I-1
I-0
1
-
APS
-
-
I-11
I-10
I-9
I-8
ISS-0
2
ISS-7
ISS-6
ISS-5
ISS-4
ISS-3
ISS-2
ISS-1
3
Bit 0
ISS-0
IOS-7
OSS-3 IOS-6
OSS-2 IOS-5
OSS-1 IOS-4
OSS-0IOS-3
ISS-11IOS-2
ISS-10IOS-1
ISS-9 IOS-0
ISS-8
4
IOS-7
IOS-6
IOS-5
5
OOS-3
OOS-2
OOS-1 OOS-0
Bit 7
Bit 6
Bit 5
-
-
Byte
0
-
IOS-4
IOS-3
IOS-2
IOS-1
IOS-0
IOS-11 IOS-10
IOS-9
IOS-8
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
-
O-3
O-2
O-1
O-0
Abbreviations
I = Input Data (0=OFF, 1=ON)
O = Output Data (0=OFF, 1=ON)
ISS = Input Short Status (0=Working, 1=Fault) OS = Output Status (0=Working, 1=Fault)
IOS = Input Open Status (0=Working, 1=Fault) OGS = Output Group Status (0=Working, 1=Fault)
IGS = Input Group Status (0=Working, 1=Fault) APS = Aux Power Status (0=OFF, 1=ON)
InterlinkBT™ 3000 Campus Drive Minneapolis, MN 55441 Phone: (763) 694-2300
10240143
Rev. 2.0
11/01
2
Module Specifications
FDNP-P1204G-TT
12 PNP Input and Four 0.5A
Output, Per Point Diagnostic
Supply Voltage
Bus power
Internal current consumption
Auxiliary power
11-26 VDC
<100 mA, plus sum of sensor currents (from bus power)
18-26 VDC
Input Circuits
Input voltage (V+)
Open circuit current (V+)
Sensor current (V+)
(12) PNP 3-wire sensors or dry contacts or (6) PNP 4-wire sensors
11-26 VDC (from bus power)
< 1mA
<80 mA per input
Input signal current (Input)
Input delay
OFF <2mA
ON 3.0-3.4 mA at 24VDC
2.5 ms
Output Circuits
Output voltage
Output load current
Open circuit current
Maximum switching frequency
(4) DC actuators
18-26 VDC (from auxiliary power)
0.5 A per output (from auxiliary power)
< 1 mA per output
100 HZ
I/O LED Indications
Amber=Open-circuit
Off=Off
Green=On
Red=Short-circuit
Module Status LED
Green: working properly
Flashing green: detecting autobaud rate
Flashing red: I/O short-circuit
Network Status LED
Green: established connection
Flashing Green: ready for connection
Flashing red: connection time-out
Red: connection not possible
Adjustments
Address
Communication Rate
via Rotary Switch
0-63
Auto/125k/250k/500k
Housing
Material
Enclosure
Operating temperature
glass filled nylon with nickel plated brass connectors
NEMA 1,3,4,12,13 and IEC IP 67
-25° to 70°C (-13° to 158°F)
InterlinkBT™ 3000 Campus Drive Minneapolis, MN 55441 Phone: (763) 694-2300
10240143
Rev. 2.0
11/01
3

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project