R
PORTABLE CD PLAYER with MP3
DIGITAL RADIO CASSETTE RECORDER
MODEL JX-CD492
OWNER’S MANUAL
Visit our Web Site: http://www.jwin.com
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
T h i s l i g h t n i n g f l a s h w i t h arrowhead symbol, within an equilateral triangle, is intended t o a l e r t t h e u s e r t o t h e p r e s e n c e o f u n i n s u l a t e d
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning: to reduce the risk of electric shock, do not remove cover (or back) no u s e r - s e r v i c e a b l e p a r t s inside. Refer servicing to qualified service personnel.
!
The exclamation point within a n e q u i l a t e r a l t r i a n g l e i s intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
This appliance shall not be exposed to dripping or splashing water and objects filled with liquids such as vases must not be placed on apparatus.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND
FULLY INSERT.
1
PRECAUTIONS
CAUTION:
To avoid electric shock, this unit must not be exposed to dripping or splashing water
Minimum distances around the apparatus for sufficient ventilation;
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus;
Before scrapping the appliance, remove the batteries and place them in the appropriate battery collection container.
CAUTION
CLASS 1 LASER PRODUCT
LASER SAFETY
Use of Controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This unit employs a laser. Only qualified service personnel should attempt repair.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
DANGER: INVISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK FAILED OR
DEFEATED. AVOID DIRECT
EXPOSURE TO BEAM.
CAUTION: HAZARDOUS LASER
RADIATION WHEN OPEN AND
CAUTION
INTERLOCK DEFEATED.
CLEANING: Always disconnect unit from power supply before attempting to clean it.
Use soft cloth moistened with soapy water, wipe gently.
Do not use solvents or abrasive materials.
2
LOCATION OF CONTROLS
TOP VIEW
1. DBBS ON/OFF Button
2. FM Antenna
3. Handle
4. CD Door
5. Cassette Control Buttons (PAUSE/STOP-
EJECT/FFW/REW/PLAY/RECORD)
6. CD Door Open Lid
7. Volume Control
8. FUNCTION Selector (TAPE -“CD/Radio
Off” /RADIO/CD)
9. FM STEREO/MONO Selector
1
2
3
4
FRONT VIEW
10. Cassette Door/Compartment
11. Speakers
12. FOLDER DN/M-DN Button
13. STOP/BAND Button
14. TUNING/CD SKIP DN/Backward Button
15. CD/TUNER LCD Display
16. Remote Sensor
17. TUNING/CD SKIP UP/Forward Button
18. PLAY/PAUSE Button
19. Built-in Microphone
20. FOLDER UP/M-UP Button
21. PROG./MEM. Button
REAR VIEW
22. Battery Door/Compartment
23. Headphones
24. AC Input Socket
25.
RESET Switch - If the set locked up, or does not display information, or the data displayed is wrong, press the “RESET” switch with a sharp object, e.g. needle etc.
The data must then be re-entered.
Note: Tuner memory would be lost when “RESET” switch pressed.
12
13
11
10
14
15
5
6
7
8
16
17
18
19
20
21
22
23
25
24
9
11
Headphone Jack
1.5V x 8 UM 2 or
“C” size or LR14
Headphone Jack “PHONES” (23) for headphones with 16-32 Ohm impedance (3.5mm jack). Use corresponding adaptors (Electronics shops) if you h a v e d i f f e r e n t p l u g s . T h e s p e a k e r s a r e automatically switched off when the headphones are being used.
CAUTION:
Listening at high power for long periods of time can damage users’ ears.
3
-
+
-
+
+ -
- +
+ -
- +
+
-
+
-
REMOTE CONTROLS
26. FOLDER UP/M-UP and FOLDER DN/M-CN
Button
27. PROG./MEM. Button
28. CD PLAY/PAUSE Button
29. PLAY MODE Button
30. TUNER/CD SKIP DN/Backward Button
31. TUNER/CD SKIP UP/Forward Button
32. CD STOP/BAND Button
29
28
27
26
30
31
32
BATTERY REPLACEMENT
1.
Remove the battery compartment cover.
2.
3.
Insert two "AA" size / LR6 / UM-3 batteries (not included) into the battery compartment and ensure the proper polarities are maintained.
Replace the battery compartment cover.
1
3
2
Battery Life
To prevent damage due to battery leakage, the remote should be checked periodically as required.
Damage due to battery leakage is not covered by the warranty.
When the battery becomes weak, the remote control will not work, be sure to replace both batteries at the same time. We recommend ALKALINE batteries for longer usable life.
4
OPERATING INSTRUCTION
POWER ON/OFF
1.
To turn on the power, slide the FUNCTION selector (8) to your desired mode (RADIO, CD or TAPE with Play button pressed).
(CD / RADIO OFF)
RADIO
TAPE CD
2.
To turn off the power, slide the FUNCTION selector (8) to TAPE position.
(CD / RADIO OFF)
RADIO
TAPE CD
BASIC OPERATION
Volume Control
Once the required station has been located, adjust the VOLUME controls (7) to the desired level.
DBBS Control
Press the DBBS button (1) once to get a rich bass sound,
VOLUME
5
LISTENING TO THE RADIO
1.
Set the FUNCTION selector (8) to RADIO mode
(CD / RADIO OFF)
RADIO
TAPE CD
STORING PRESET STATIONS
1.
Tune to the station you wish to store by pressing TUNING UP or DOWN button (14)/
(17) or (30)/(31)
SKIP/
TUN DN
SKIP/
TUN UP
OR
2. Press the BAND button (13) or (32) for AM or
FM band.
Example : FM mode
The unit enables you to program 10 stations of FM and 10 stations of AM band.
2. Press the PROGRAM button (21) or (27) once.
(“MEMORY” flashing)
3. Press the TUNING Up or Down button (14)/(17) or (30)/(31) to tune to the desired station.
SKIP/
TUN DN
SKIP/
TUN UP
OR
3. Press the FOLDER/M-UP or FLDER-DN button
(20)/(12) or (26) repeatedly to set the desired preset station number. (“MEMORY” still flashing)
Manual Tuning - Press and hold the TUNING
UP or DOWN buttons (14)/(17) or (30)/(31) until the display approaches your desired station.
Then tap the buttons repeatedly until the display shows the exact frequency.
Auto tuning - Press the TUNING forward or backward buttons momentarily and release.
The tuner will move up or down to the next available station.
4. When finished listening, slide the FUNCTION selector (8) to TAPE (RADIO/CD OFF) position.
4. Press the PROGRAM button (21) or (27) again.
The station is stored. (“MEMORY” steady on)
5. To store other stations, repeat above steps.
RECALLING PRESET STATION
Press the FOLDER/M-UP or FOLDER/M-DN
(20)/(12) or (26) button on main unit or remote control repeatedly to select the desired station.
6
PLAYING COMPACT DISCS
1.
Set the FUNCTION selector (8) to CD mode
(CD / RADIO OFF)
RADIO
TAPE CD
To pause the CD
Press the PLAY/PAUSE button while the disc is playing. Press it again to resume playing.
PLAY/PAUSE
2.
If there is no CD inside or disc damaged, a
"- - -" display will be appear.
When there is no disc
While paused
Loading a disc
1.
Lift the CD door lid (6) to open the CD door.
2.
Put a disc inside and then close the CD door.
After that, reading TOC will start.
Note: Ensure the disc is pushed fully and locked in place.
After reading TOC
To stop the disc
Press the STOP button (13) or (32).
STOP/BAND
Stop condition (TOC display)
Note: This unit is CD-R / -RW compatible.
To play the disc
Press the PLAY/PAUSE button (18) or (28) to play the CD.
PLAY/PAUSE
Playing track 1
7
Skip and Search Function
Press the SKIP Next or Back buttons (14)/(17) or (3 0)/(31) briefly.
SKIP/
TUN DN
SKIP/
TUN UP
OR
IN PLAY MODE
PRESS ONCE PRESS TWICE
B A C K T O T H E
B E G I N N I N G O F
T H E C U R R E N T
TRACK
P R E V I O U S
TRACK
NEXT TRACK
IN STOP MODE
PRESS ONCE
P R E V I O U S
TRACK
NEXT TRACK
Press and hold the SKIP button during playback :
: FAST BACKWARD : FAST FORWARD
NOTE : During search mode low level audio will be heard to assist in locating the correct point in the track.
To repeat a track or disc
Press the PLAY MODE button (29) on the remote control one time, "one track repeat" will be active.(REPEAT Flashes)
PLAY/
MODE
One track repeat (flashing)
With one more press, "all track repeat" will be active.
(REPEAT ALL will show steadily)
With one additional press, the repeat mode is cancelled.
PLAY/
MODE
All track repeat (steady)
Random play function
In CD stop mode, press the PLAY MODE button
(29) on remote control three times (RANDOM displayed), then press PLAY/PAUSE button (18) or
(28) to start random play. Press PLAY MODE button (29) once again to change normal playing mode.
PLAY/
MODE
Random playing start
8
PROGRAMMED PLAYBACK
This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop mode.
1. Press the PROGRAM button (21) or (27) one time. (“MEMORY” flashes)
4. Continue to program, repeat steps 2 and 3 for each selection.
When program is full
PROGRAM
2. Press the SKIP Forward or Backward button
(14)/(17) or (30)/(31) to select the desired track to be programmed.
SKIP/
TUN DN
SKIP/
TUN UP
OR
Reviewing programs
Press the PROGRAM button (21) or (27) repeatedly. The track number programmed on each program number will be displayed.
5.
Press PLAY/PAUSE button (18) or (28) to play the programmed tracks.
Choose track 4
3. Press the PROGRAM button (21) or (27) one time, then the selected track, e.g., track 4 is stored.
Clear the program
Press the PROGRAM button (21) or (27) to recall previously programmed track (“MEMORY” icon flashes), then press CD stop button to cancel the preset programs or change function mode or open the CD door.
PROGRAM
9
PLAYING MP3 DISCS
1.
Set the FUNCTION selector (8) to CD mode
(CD / RADIO OFF)
RADIO
TAPE CD
2. Press CD SKIP / buttons (14)/(17)
or (30)/(31) to select desired track.
SKIP/
TUN DN
SKIP/
TUN UP
OR
2.
If there is no disc inside or disc damaged, a
"- - -" display will be appear.
When there is no disc
Folder 2 track 3 selected
Loading a disc
1.
Lift up the CD door lid (6) to open the CD door.
2.
Put a disc inside and then close the CD door.
After that, reading TOC will start.
Note: Ensure the disc is pushed fully and locked in place.
After reading TOC
3. Press the PLAY/PAUSE button (18) or (28) to
start playing.
PLAY/PAUSE
Playing track 3 of folder 2
Note: This unit is CD-R / -RW compatible.
To play the disc
1. Press the FOLDER UP or DN button (20)/(12)
or (26) to select desired folder. Total tracks of
select folder will then be shown.
Folder 2 selected Tracks of folder 2
To pause the CD
Press the PLAY/PAUSE button (18) or (28) while the disc is playing. Press it again to resume playing.
PLAY/PAUSE
While paused
10
To stop the disc playing
Press STOP button (13) or (32).
Stop condition (TOC display)
STOP/BAND
PLAY MODE for Repeat Track/Folder and
Random Play Operation
1. Press the PLAY MODE button (29) on the
remote control once for current track repeat.
PLAY/
MODE
Note: Once your desired mode selected, press the
PLAY/PAUSE button (18) or (28) to start playback from stop mode.
5. Press the PLAY MODE button (29) on the
remote control fifth for cancel above modes.
PROGRAMMED PLAYBACK
This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop mode.
1. Press the PROG./MEM. Button (21) or (27) one
time.
PROGRAM
Program input mode
2. Press the PLAY MODE button (29) on the
remote control twice for tracks in current folder
repeat.
PLAY/
MODE 2. Press the FOLDER UP or DN button (20)/(12)
or (26) to select desired folder.
Choose folder 3
3. Press the PLAY MODE button (29) on the
remote control third for tracks in all folder
repeat.
PLAY/
MODE
4. Press the PLAY MODE button (29) on the
remote control fourth for tracks in random play
mode.
PLAY/
MODE
3. Press the CD SKIP or button (14)/
(17) or (30)/(31) to select the desired track to be
programmed.
SKIP/
TUN DN
SKIP/
TUN UP
OR
Choose track 4 in folder 3
11
4. Press the PROG./MEM. button again, then track
4 of folder 3 is stored.
6. Press the PLAY/PAUSE button (18) or (28) to
play the programmed tracks.
Playing track 4 of folder 3
PROGRAM
5. Continue to program, repeat steps 2 to 4 for
each selection.
When Program is full
Note: Press the PROG./MEM. Button (if programmed tracks still exist) then PLAY/
PAUSE button, the program play will start again.
Clear the program
Press the PROGRAM button (21) or (27) to recall previously programmed track (“MEMORY” icon flashes), then press CD stop button to cancel the preset programs or change function mode or open the CD door.
Reviewing programs
Press the PROG./MEM. button (21) or (27) repeatedly. The track number programmed on each program number will be displayed.
12
PLAYING CASSETTE TAPE
1.
Set the FUNCTION selector (8) to TAPE mode
RADIO
TAPE CD
3. To playback, press the PLAY button (5).
2. Press STOP/EJECT button (5) to open the cassette door. Insert a prerecorded tape to the cassette compartment, close the cassette door.
4.
To stop Playback, press the STOP/EJECT button (5).
To suspend playback
Press PAUSE button (5).
To Fast Forward or Rewind tape
Press REW or F.FWD button (5).
To resume playback, press the PAUSE button again.
TAPE RECORDING From TUNER
1. Set the FUNCTION selector (8) to the TUNER mode.
2. Follow steps 2 and 3 in "LISTENING TO THE
RADIO" to tune in the station you wish to record.
3.
Insert a blank tape to cassette compartment then close the cassette door.
4.
Press the RECORD and PLAY buttons (5) at same time to start recording.
TAPE RECORDING From CD or MP3
1.
2.
3.
4.
Select the FUNCTION selector (8) to CD mode then open the CD door by lift up door lid (6).
Put a disc inside CD compartment and then close the CD door
Insert a blank tape to cassette compartment then close the cassette door.
Press the RECORD and PLAY buttons (5).
5.
Press STOP/EJECT (5) to stop recording.
Note: 1. Return to Tape mode, rewind the tape
to listen to recorded materials.
2. Recording through built-in microphone
(Tape mode): similar to
above instructions.
13
5.
Press PLAY/PAUSE (18) or (28) to start CD playing for recording.
6.
Press STOP/EJECT (5) to stop recording.
7. Press the STOP/BAND button (13) or (32) to
stop CD playing.
CARE AND MAINTENANCE
COMPACT DISC CARE
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc.
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to clean the disc. If necessary, use a CD cleaning kit.
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the disc.
Never wipe in circular motions.
To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.
Unlike conventional records. compact discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles.
TAPE HEAD CLEANING
The tape heads, pinch roller and capstan require periodic cleaning. This removes particles of the metal oxide coating that wear off the tape and accumulate on these parts and impair performance. Switch off the power, press the Stop/Eject Key to open the cassette door, and press the Play Key. Clean the tape heads, pinch roller and capstan with a soft cloth or cotton swab dampened in isopropyl alcohol or special tape head cleaner.
NOTE: Never use any metal objects on or near the tape heads. Do not allow any cleaning material to fall into the tape assembly.
COTTON SWAB CAPSTAN
RECORD/PLAY HEAD PINCH ROLLER
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.
Caution: never allow any water or other liquids to get inside the unit while cleaning.
14
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom Possible cause
Radio
Noise or sound distorted on AM or
FM broadcasts.
Station not tuned properly for AM or FM
FM : Antenna is not extended.
Solution
Retune the AM or FM broadcast station.
Extend FM antenna.
AM : Unit is not positioned correctly.
Rotate unit until best reception is obtained.
AM or FM, no sound.
FUNCTION Selector not set to
RADIO position.
Set FUNCTION Selector to RADIO position.
Volume at minimum Increase Volume.
Cassette Player
No sound.
Sound distorted.
Speed varies
FUNCTION selector not set to
TAPE position.
Volume at minimum
Dirty Record/Play head.
Tape old or worn.
Dirty roller and capstan.
Set FUNCTION selector to TAPE position.
Increase Volume
Clean the Record/Play head.
Replace the tape.
Clean roller and capstan.
Cassette Recorder
Will not record.
Distorted sound on playback.
Compact Disc Player
CD Player will not play.
Press prevention tab removed
Defective tape or dirty tapehead.
Cover hole with tape
Replace tape or clean tape head.
CD skips while playing.
Disc is inserted but CD player skips over spot and will not play,
FUNCTION selector not set to CD position.
Set FUNCTION selector to CD position.
Insert CD with label side up.
CD is not installed or installed incorrectly.
Disc is dirty or scratched.
Disc inserted upside down.
Disc is dirty.
Disc is non-standard.
Wipe disc with cloth or use another disc.
Insert disc properly.
Clean disc.
Use correct disc.
SPECIFICATIONS
Power Supply AC 120Volts ~ 60Hz
DC 12V (1.5V x 8 UM2 or
Power Output
“C” size or LR14)
1.2W/CH with 10% THD
Dimension of Unit 290(W)x233(D)x150(H)mm
Radio Section Tuning : PLL with 20 Presets
(FM 10, AM 10)
Freq. Range : AM 520 - 1710KHz
FM 87.5 - 108MHz
Tape Section:
CD Section
Speaker
Remote Control
Built-in ALC
DC Bias/Magnet Erase
Top Loading CD
3", 8 ohms
8 Keys, Battery size "AA" x 2
Model No. ________________________________ Serial No. _________________________________
15
