null  null
[ GB ]
HD 52.3D
[ GB ] 2 axes ultrasonic
anemometer
HD 52.3D
Wind speed and direction
HD 52.3D4
Wind speed, wind direction and
barometric pressure
HD 52.3DP
Wind speed, wind direction and
solar radiation
HD 52.3DP4
Wind speed, wind direction,
solar radiation and barometric
pressure
HD 52.3D17
Wind speed, wind direction,
temperature and relative humidity
HD 52.3D147
Wind speed, wind direction,
temperature, relative humidity
and barometric pressure
HD 52.3DP17
Wind speed, wind direction,
solar radiation, temperature and
relative humidity
HD 52.3DP147
Wind speed, wind direction, solar
radiation, temperature, relative
humidity and barometric pressure
[ GB ] HD 52.3D
2 axes ultrasonic Anemometers series HD 52.3D….
The instruments of the series HD52.3D… are 2 axes ultrasonic static anemometers
for measuring:
•Wind speed and direction, U-V Cartesian components of wind speed,
•Relative Humidity and Temperature (option, code “17”),
•Diffuse Solar Radiation (option, code “P”),
•Barometric pressure (option, code “4”).
All models are equipped with compass.
RS232, RS485 and SDI‑12 serial interfaces are available with NMEA, MODBUS-RTU
and SDI-12 communication protocols.
All versions have two analogical outputs, both for wind speed and for direction, factory configurable among 4÷20mA (standard), 0÷1V, 0÷5V, 0÷10V (to be specified
when ordering).
The heater option prevents the accumulation of snow and ice from forming, allowing
accurate measurements in all environmental conditions.
Optionally available, ILAC-MRA (ACCREDIA) traceable factory calibration.
Advantages:
•The absence of moving parts minimizes maintenance;
•High sensitivity for detecting very low speeds, which are not detectable by traditional methods;
•The low power of the instrument allows installation in remote sites, with power
from solar panel and battery;
•The heating option “R” prevents the accumulation of snow and ice from forming,
allowing accurate measurements in all environmental conditions;
•Fast and easy installation (on 40mm diameter pole, optional installation kit
HD2004.20), alignment facilitated by built-in compass;
•The available measurement options join together in one single, compact and lightweight instrument, the main variables of interest in weather stations;
•MODBUS RTU output allows instrument networking.
Measuring Range
600…1100 hPa
Resolution
0.1 hPa
Accuracy
± 0,5 hPa @ 20°C
Solar Radiation (option P is requested)
Employed sensor type
Thermopile
Measuring Range
0…2000 W/m2
Resolution
1 W/m2
Accuracy
2nd class Pyranometer
General features
Power supply
10…30 Vdc
Power Consumption
26mA @ 12Vdc without heater, 6W with heater
Serial Outputs
RS232, RS485, RS422 and SDI-12
Communication Protocols
NMEA, MODBUS-RTU, SDI-12
Analog Outputs
2 analog outputs for wind speed and direction.
Output type to be specified when ordering among
4…20mA (standard), 0…1V, 0…5V and 0…10V (option 0…10V requires power supply 15…30Vdc)
Electrical connection
male connector M23 19 poles
Working temperature
-40…+60 °C
Dimensions
H=179mm, Ø=150mm (HD52.3D, HD52.3D4)
H=200mm, Ø=150mm (HD52.3DP, HD52.3DP4)
H=336mm, Ø=150mm (HD52.3D17, HD52.3D147)
H=357mm, Ø=150mm (HD52.3DP17, HD52.3DP147)
Weight
about 1 Kg (full version, HD52.3DP147)
Housing
Plastic material: LURAN®S (ASA)
Metallic parts made of AISI 316
Protection degree
IP66
Typical applications:
•Weather stations
•Environmental monitoring
•Agriculture
•Sports
•Marine and Harbour applications
•Airports
•HVAC
•Construction/Crane safety
•Renewable energy
•Building automation
Technical specifications:
Wind speed
Employed sensor type
Measuring Range
Resolution
Accuracy
Ultrasonic
0…60 m/s
0.01 m/s
Whichever is greater ± 0,3 m/s or ± 2%, (0…35 m/s)
± 3% (> 35 m/s)
Wind direction
Employed sensor type
Ultrasonic
Measuring Range
0…360°
Resolution
0.1°
Accuracy
± 2° RMSE from 1.0 m/s
Compass
Employed sensor type
Magnetic
Measuring Range
0…360°
Resolution
0.1°
Accuracy
± 1°
Air temperature (option 17 is requested)
Employed sensor type
Pt100
Measuring Range
-40…+60 °C
Resolution
0.1 °C
Accuracy
± 0,15°C ± 0,1% of the measure
Relative Humidity (option 17 is requested)
Employed sensor type
Capacitive
Measuring Range
0…100%RH
Resolution
0.1%
Accuracy (@ T = 15…35 °C)
± 1,5%UR (0..90%RH), ± 2%RH (remaining field)
Accuracy (@ T = -40…+60 °C) ± (1,5 + 1,5% of the measure)%RH
Barometric Pressure (option 4 is requested)
Principle
Piezoresistive
HD 32.35FP
HD 32.35
HD52.3D…: 2 axes ultrasonic static anemometers for the measure of wind speed
and direction, U-V Cartesian components of wind speed, relative humidity
and temperature (optional), diffuse solar radiation (optional) and barometric
pressure (optional). A compass is supplied. RS232, RS485 and SDI‑12 serial
outputs, NMEA, MODBUS-RTU and SDI-12 communication protocols. Two analogical outputs, for wind speed and direction, factory among 4÷20mA (standard), 0÷1V, 0÷5V or 0÷10V (to be specified when ordering). Heater option
is available. Power supply: 10…30Vdc (15…30Vdc for 0÷10V analog outputs).
Installation on a pole: external Ø40mm and internal Ø36mm. Input with M2319pin male connector and M23 19-pin steering female connector. Optional 5m
or 10m cable with a connector on one side and open wires on the other.
DIMENSIONS (mm)
Tube
Tube
HD 52.3D
Wind speed and direction.
HD 52.3D4
Wind speed, wind direction and barometric pressure.
Tube
HD 52.3DP
Wind speed, wind direction and solar
radiation.
HD 52.3DP4
Wind speed, wind direction, solar radiation
and barometric pressure.
Tube
HD 52.3D17
Wind speed, wind direction, temperature
and relative humidity.
HD 52.3DP17
Wind speed and direction, solar radiation,
temperature, relative humidity.
HD 52.3D147
HD 52.3DP147
Wind speed, wind direction, temperature, Wind speed, wind direction, solar radiarelative humidity and barometric pressure. tion, temperature, relative humidity and
barometric pressure.
ACCESSORIES
CP52.5: Connection cable with M23 19-pin steering female connector on one side,
free wires on the other. 5m long.
CP52.10: Connection cable with M23 19-pin steering female connector on one side,
free wires on the other. 10m long.
CP52.C: Further M23 19-pin steering female connector.
HD2004.20: Tripod kit for installing anemometers on a flat base. Height 3m.
HD2004.22: 1200x530x34mm Solar panel mounting kit to a Ø40÷50mm pole. AISI
304 stainless steel.
HD2004.30: 80W monocrystalline solar pannel. Dimensions 1200 x 530 x 34 mm.
Model MD5000080 – CS EVOLUTION.
HD32.35: Outdoor housing complete with acquisition system for weather stations.
Material: AISI 304 stainless steel. Screen to protect the housing from solar radiation. Powder-coated white. Double locking one of which is a key. Dimensions
450 x 300 x 210 mm. Degree of protection IP66. Supplied with accessories for
attachment to the pole diameter 36 ÷ 52 mm. Provided for 100 ÷ 240Vac mains
power supply, includes: HD32MT.1 datalogger, AC/DC power supply unit with
integrated battery charger, 12V rechargeable backup battery, surge protectors,
disconnectors, terminal block for power supply distribution and connectors for
connecting the external sensors.
HD32.35FP: Outdoor housing complete with acquisition system for weather stations.
Material: AISI 304 stainless steel. Screen to protect the housing from solar
radiation. Powder-coated white. Double locking one of which is a key. Dimensions 450 x 300 x 210 mm. Degree of protection IP66. Supplied with accessories for attachment to the pole diameter 36 ÷ 52 mm. Provided for power
supply from solar panel, includes: HD32MT.1 datalogger, solar charge controller,
terminal block for power supply distribution and connectors for connecting the
external sensors.
HD32.36: Outdoor housing complete with acquisition system for weather stations.
Material: Polyester with fiberglass-reinforced hot-pressed. Screen to
protect the housing from solar radiation, powder-coated anodized aluminum.
White. Key lock. Dimensions 415 x 310 x 170 mm. Degree of protection IP66.
Supplied with accessories for attachment to the stainless steel pole diameter 36
÷ 52 mm. Provided for 100 ÷ 240Vac mains power supply, includes: HD32MT.1
datalogger, AC/DC power supply unit with integrated battery charger, 12V rechargeable backup battery, surge protectors, disconnectors, terminal block for
power supply distribution and connectors for connecting the external sensors.
HD32.36FP: Outdoor housing complete with acquisition system for weather stations. Material: Polyester with fiberglass-reinforced hot-pressed. Screen
to protect the housing from solar radiation, powder-coated anodized aluminum.
White. Key lock. Dimensions 415 x 310 x 170 mm. Degree of protection IP66.
Supplied with accessories for attachment to the stainless steel pole diameter
36 ÷ 52 mm. Provided for power supply from solar panel, includes: HD32MT.1
datalogger, solar charge controller, terminal block for power supply distribution
and connectors for connecting the external sensors.
PURCHASING CODES
HD 52.3D
R = heater option
Blank = not heated
P = solar radiation option (pyranometer)
4 = barometric pressure option
17 = relative humidity and temperature option
P4 = solar radiation and barometric pressure option
P17 = solar radiation, relative humidity and temperature option
147 = barometric pressure, relative humidity and
temperature option
P147 = solar radiation, barometric pressure, relative humidity and temperature option
No characters = basic version: wind speed and direction
Analog outputs for wind speed and direction: 4…20mA standard; to be requested:
0…1V, 0…5V or 0…10V (0…10V option requires power 15…30Vdc).
HD 52.3D
HD 52.3D4
HD 52.3DP17
HD 52.3DP147
Manufacture of portable and bench top scientific instruments
Current loop and voltage output transmitters and regulators
Temperature - Humidity Dew point - Pressure - CO2
Air speed - Light - Optical Radiation - Acoustics - Vibration
pH - Conductivity - Dissolved Oxygen - Turbidity
Elements for weather stations - Thermal Microclimate
LAT N° 124 Signatory of EA, IAF and ILAC Mutual Recognition Agreements
Temperature - Humidity - Pressure - Air speed
Photometry/Radiometry - Acoustics
CE CONFORMITY
• Safety: EN61000-4-2, EN61010-1 Level 3
• Electrostatic discharge: EN61000-4-2 Level 3
• Electric fast transients: EN61000-4-4 Level 3, EN61000-4-5 Level 3
• Voltage variations: EN61000-4-11
• Electromagnetic interference susceptibility: IEC1000-4-3
• Electromagnetic interference emission: EN55022 class B
RoHS
2002/95/EC
TEST-THERM Sp. z o.o.
www.test-therm.pl
30-009 Kraków
ul.Friedleina 4-6
[email protected]
tel 12 632 13 01
fax 12 632 10 37
Delta Ohm srl - Via G. Marconi, 5 - 35030 Caselle di Selvazzano (Pd) - Italy
Tel. 0039 0498977150 r.a. Fax 0039 049635596 - E-mail: [email protected] Web Site: www.deltaohm.com
01
08.11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement