Joystick radio remote control Type J and J+

Joystick radio remote control Type J and J+
Joystick radio remote control
Type J and J+
Main features
The J Joystick range of radio remote controls has been designed
to satisfy different operating requirements in various fields.
The transmitter, available with 2 joysticks - 1 or 2 axis - can be used
to move a large number of machines.
Many functions have been included and can be actived directly by
the transmitter, in order to increase versatility of the different
models.
The working frequency, passive emergency time and battery saver
application can therefore be modified.
A space has been provided on the transmitter, to enable the installation
of additional commands, available on request, such as push-button
and selectors which can be used for accessory functions.
The receiver is available in 20 relay version, with a.c. and d.c.
power supply.
The dip-switches on the receiver allow a series of special,
programmable functions to be set up, ensuring maximum flexibility
of installation.
Reliability
All J Joystick electronic components undergo sophisticated operating
tests carried out in suitable laboratories.
The devices are tested for shock and chemical resistance,
atmospheric agents and temperature changes.
Applications
Tower cranes, bridge cranes, jib cranes, derricks, winches, hoists,
road rescue services and automated industrial machinery in general.
1
-EYER)NDUSTRIE%LECTRONIC'MB(n-%9,%
#ARL"OSCH3TRA”E
,ENGERICH'ERMANY
4EL &AX )NTERNETWWWMEYLEDE
%-AILSALES MEYLEDE
Joystick radio remote control
Type J+ two-way version
Main features
The J+ radio remote control is the two-way version, by
which the transmitter unit can receive feedback from the radio
commanded machine.
The transmitter with 2 joysticks - 1 or 2 axis - are equipped with
an LCD display with 24 alpha-numeric characters and a number
of icon symbols.
Immediate information regarding weight, distance, working
conditions, errors, etc. can therefore be easily shown on the
display.
If the operating machine is provided with an intelligent serial
connection, the type and quantity of feedback are virtually
unlimited.
In this case the message construction is governed directly by the
machine, using a number of simple software functions.
If no serial interface is available, a series of OFF/ON inputs is
provided in any case, which can be used to visualise specific
messages pre-set into the device.
J Types and Codes
J 32
3 axis J radio control, 2 aux
Kit: 1Tx, 1Rx, 1Cb, 2Pb, Technical Sheets
J 35
3 axis J radio control, 5 aux
Kit: 1Tx, 1Rx, 1Cb, 2Pb, Technical Sheets
J 42
4 axis J radio control, 2 aux
Kit: 1Tx, 1Rx, 1Cb, 2Pb, Technical sheets
J 45
4 axis J radio control, 5 aux
Kit: 1Tx, 1Rx, 1Cb, 2Pb, Technical sheets
J Types and Codes
J+ 32
3 axis J+ radio control 2 aux
Kit: 1Tx, 1Rx, 1Cb, 2Pb, Technical Sheets
J+ 42
4 axis J+ radio control 2 aux
Kit: 1Tx, 1Rx, 1Cb, 2Pb, Technical sheets
2
-EYER)NDUSTRIE%LECTRONIC'MB(n-%9,%
#ARL"OSCH3TRA”E
,ENGERICH'ERMANY
4EL &AX )NTERNETWWWMEYLEDE
%-AILSALES MEYLEDE
For Your Safety
T E C H N I C A L D ATA
GENERAL
Operating frequency
Distance of Hamming
Probability of wrong manoeuvre
Programmable codes of address
Command response time
Active emergency response time
Passive emergency response time
Operating range
Working temperature range
Protection degree
433.05 ÷ 434.79 MHz
6
4.7 x 10 -11
with 48 bit key
65 mS
65 mS
< 1.6 S
80 m
-10C° ÷ +55C°
IP65
TRANSMITTER
R. F. Power
Power supply
Power consumption
Accumulators
Continuous operating autonomy
Case
Size
Weight with batteries
10 mW ERP
3.6 Vdc
65 mA max
NiMh battery pack model NH650
8 hours min.
nylon-glass
see page n. 5
1,1 kg aprox.
RECEIVER
Sensitivity
Antenna
AC power supply
DC power supply
Command relay range
Case
Size
Weight
-110 dBm
inside
48V 50-60Hz 5VA
12V 5 W
8A/4A 250V~
ABS
See page n. 5
1,9 Kg aprox.
3
Safety has always been a priority and that is why all our radio
remote controls are designed with redundant signals and
double control channels.
The receiver operates using a double microprocessor circuit. In addition to receiving the commands from the transmitter, each of the two
microprocessors carries out a continuous check on the functioning of
the other.
The exit circuit is provided with two self-checking safety relays for the
STOP function.
This equipment offers a higher degree of safety than that available on
other systems using a single micro-processor.
In addition, a 48 bit identifying code key feature offers a unique
communication system operating between the transmitter and its
designated receiver.
Compliance with Directives
J Joystick radio remote controls:
Are CE marked
Comply with directives R&TTE 99/05 - 89/336/CE - 73/23/CE
Show the Identification Number 0678
-EYER)NDUSTRIE%LECTRONIC'MB(n-%9,%
#ARL"OSCH3TRA”E
,ENGERICH'ERMANY
4EL &AX )NTERNETWWWMEYLEDE
%-AILSALES MEYLEDE
Dimensions
Transmitter
200
130
The lightweight transmitter, made of special, shock-proof material,
features 2 joysticks - 1 or 2 axis for 4 positions and a special series
of push buttons or levers for auxiliary commands.
Thanks to its ergonomic shape, it can be operated very easily.
In order to ensure maximum versatility of use, the radio remote control can be personalised with special executions and appropriate
labels.
Emergency STOP button, produced and certified according to
EN954-1 Standards has been installed to ensure maximum safety
during operation.
165
115
210
Receiver
The water-tight receiver with incorporated antenna comes with a
handle which can also be wall-mounted, allowing a quick removal
after use without any need of tools.
Although the size is very small, the receiver is provided with a
removable terminal board which allows an easy and fast cabling.
Thanks to a self-checking system, all the operating phases of the
radio remote control, like setup, are shown and readable through
8 leds.
345
Battery charger and batteries
60
The rapid battery charger enables total re-charging of
batteries in 4÷5 hours.
The nickel/metal-hydrate battery pack guarantees 8 hours
autonomy on continuous duty of the device.
The complete recharging and the automatical switching off of the
battery charger are shown through a led.
Every radio remote control device is provided with 2 batteries and
a battery charger.
4
50
115
-EYER)NDUSTRIE%LECTRONIC'MB(n-%9,%
#ARL"OSCH3TRA”E
,ENGERICH'ERMANY
4EL &AX 110
)NTERNETWWWMEYLEDE
%-AILSALES MEYLEDE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement