AXOLUTE Outdoor entrance panel
AXOLUTE Outdoor
entrance panel
349140
Front view
Axolute outdoor entrance panel suitable for connection to the 2-WIRE system BUS or to
be used in BTicino IP systems. It’s fitted with capacitive soft touch control backlit keypad,
motorised colour camera (which swivelling operation can be controlled from the preset
handsets), colour display with home page that can be fully customised by the installer,
and transponder reader for the release of the door lock, which may also be activated
using a numeric code for residents. Module to be completed with flush mounted box
and surround plate. Programming, residents directory, and the configuration are
completed using the appropriate software supplied with the product.
1
2
3
Related items
339313 (Steel flush mounted box with tearing protection)
331130 (SFERA plastic flush mounted box)
339213 (Surround plate + frame, steel finish)
339223 (Surround plate + frame, brass finish)
4
5
6
Technical data
Power supply from SCS BUS:
Stand by absorption:
Max. operating absorption:
Operating temperature:
Connections:
18 – 27 Vdc
220 mA
420 mA
(-25)-(+70)°C
2-WIRE SCS BUS
Ethernet 10/100 Mbit/sec
Protection index:
IP54
PI against mechanical impact: IK07
Rear view
7
8
Dimensional data
50 mm
104 mm
35.5 mm
84 mm
11
Legend
Electric module
27.5
mm
139 mm
30 mm
Brass surround plate + frame
Protrusion from the wall:
13.5 mm
1234-
Loudspeakers
Colour camera that can be swivelled
LCD colour display
Capacitive alphanumeric keypad: to search for the extension and for sending the
call, as well as for enabling the installer to complete the programming procedure
5 - Transponder reader: to open the door lock using the transponder
6 - Microphone
7 - Configurator socket
8 - Mini-USB connector: for PC connection, for programming or firmware update
9 - Clamps for the connection of the 2-wire SCS BUS
10 - Additional power supply connection clamps
11 - Cable fastener
12 - Ethernet connector: for connection to the IP BTicino system and for programming
and firmware update from PC
BT00134-b-UK
355 mm
330 mm
Steel surround plate + frame
Protrusion from the wall:
11 mm
12
10
253 mm
300 mm
Flush mounted box
139 mm
9
TECHNICAL SHEETS - VIDEO DOOR ENTRY SYSTEM
Description
1
349140
Configuration
The device can be configured in three different modes:
1) Physical connection fo the configurators to their sockets:
P - entrance panel number
The configurator connected to P socket assigns an identification number within the
system to the EP. The numbering of the EP must always start from P=0.
The EP configured with P=0 must be the main one.
S - selection of the ring tone to send to the Handset and general call
When a call is received: S=0 (RING TONE 1 - Default)
S=1 (RING TONE 2)
S=2 (RING TONE 3)
S=3 (RING TONE 4)
S=9 (GENERAL CALL TO ALL THE HANDSETS)
2) Directly from the keypad of the electronic module:
Using the installer menu (Password protected function)
Configuration
Configuration of the
SCS address of the
entrance panel
WARNING: the presence of physical configurators in the configurator sockets
WILL PREVENT keypad configuration.
BT00134-b-UK
2
Entrance panel
address
Ring tone selection /
general call
349140
3) Using the TiAxoluteOutdoor Software supplied:
For the connection to the PC use an USB-mini cable or an Ethernet cable (cross cable).
The dedicated application can be used for configuration, programming, device Firmware
update, fill the residents list, save all information, and download to the device.
USB connection
BUS
Ethernet connection
TECHNICAL SHEETS - VIDEO DOOR ENTRY SYSTEM
Configuration
Cross cable
If the Axolute EP is installed and has Ethernet connection, remote connection is also possible.
WARNING: in order for the communication to take place, the EP must be powered and not physically configured.
BT00134-b-UK
BUS
3
349140
Wiring diagrams
2-WIRE SCS BUS connection
349140
230 Vac
346000
OUT1
OUT2
OUT3
346830
or
F441
OUT4
OUT
1 2 PL S+ S-
346230
346230
or
346260
346020
35,
PRI: 220 - 240V~
175A
50/60
165m z
H
127Vdc
600 A
2:
m
IN
3 7
IN1
BUS 2 1
IN2
IN3
IN4
SCS
BUS
1
2
2
230 Vac
OPTIONAL
NOTE (*): needed for lines (SCS power supply - EP) > 50 m (with cable item 336904)
IP Ethernet connection
349140
230 Vac
12 Vac 1 A
1 2 PL S+ S-
346230
346000
346230
or
346260
346020
35,
PRI: 220 - 240V~
175A
50/60
165m z
H
127Vdc
600 A
2:
m
3 7
SWITCH C9455
BUS 2 1
230 Vac
BT00134-b-UK
'&,Q
IP
1
2
BUS
NOTE (*): needed for lines (SCS power supply - EP) > 50 m (with cable item 336904)
4
2
OPTIONAL
1
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement