- Computers & electronics
- Computer components
- Interface components
- Interface hubs
- Vantec
- CB-U320GNA
- Data Sheet
Vantec CB-U320GNA USB 3.0 To Dual Gigabit Ethernet Network Adapter Datasheet
Add to my manuals1 Pages
Vantec CB-U320GNA brings dual Gigabit Ethernet connectivity through a single USB port. With speeds up to 1000Mbps, it allows connection to two separate networks for various use cases like network management, virtual machine configuration, bridging, and troubleshooting. Its compact size and compatibility with Windows, Mac, and Linux make it a portable solution for IT professionals and users requiring dual network access.
advertisement
Dual Gigabit Ethernet ports through a single USB connection
Compliant with Universal Serial Bus 3.0 Specification, Revision 1.0
Compatible with USB Specification, Revision 2.0
Supports CDC-ECM
Supports crossover detection, auto-correction, polarity correction, adaptive equalization, cross-talk+echo cancellation, and timing recovery
Supports advanced link down power saving when Ethernet cable is unplugged
Supports ACPI, APM, OSPM, and Wake-on-LAN
Supports jumbo frame up to 9K bytes
USB Cable Type A & 2 x RJ45 connection
LED indicators for Ethernet connection
Support Windows XP, 7, 8, 8.1 / Mac OS X 10.8 or Greater / Latest Linux kernel
Software Offload:
Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
IEEE:
Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Supports IEEE 802.1P Layer 2 Priority Encoding Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.3az-2010 (Energy Efficient Ethernet)
Microsoft AOAC (Always On Always Connected):
Supports 16-set 128-byte Wake-Up Frame pattern exact matching Supports link change wake up Supports Microsoft WPD (Wake Packet Detection)
Supports Protocol Offload (ARP & NS)
Intel CPPM (Converged Platform Power Management):
Supports L1 with 3ms BESL (USB 2.0) Dynamic LTM messaging (USB 3.0) Supports U1/U2 (USB 3.0) Supports selective suspend
Introduction:
Vantec introduces the USB 3.0 To Dual Gigabit Ethernet Network Adapter bringing you Dual Gigabit Ethernet through a single USB port.
With the ease through a single USB connection, you can gain gigabit network speeds of up to 1000Mbps and be connected to two separate physical networks for any special function like network management, networked virtual machine configuration, bridging, gateway management, networking troubleshooting and more. This is a convenient solution for any IT administrators to bring along with their systems such as laptops, Ultrabooks or Macbook Airs to analyze and manage any networks. This USB 3.0 To Dual Gigabit Ethernet
Network Adapter comes with a wealth of features to help enhance its use.
Specifications:
Model:
Device Support:
USB Port:
Gigabit Network Port:
Power:
Dimension:
Cable Length:
CB-U320GNA
USB 3.0 Type A (backward compatible with USB 2.0)
1, Type A
2 - RJ45 Ethernet (10/100/1000)
USB Bus powered
86 x 35 x 17 mm
194 mm
*Actual speed may varies depending on the OS, condition, configuration, network traffic and equipment used.
System Requirement
Microsoft Windows XP, Vista, 7, 8, 8.1 / Mac OS X 10.8 or Greater / Latest Linux OS
USB 3.0 Port preferred to get maximum speed
Package Contents
USB 3.0 To Dual Gigabit Ethernet Network Adapter, User’s Manual, Driver CD
Send us an e-mail at: [email protected]
www.vantecusa.com
All Registered Trademarks Belong To Their Respective Companies Copyright © 2014 Vantec Thermal Technologies. All Rights Reserved.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project